Panasonic KXTCD955 Istruzioni per l'uso

PLEASE READ BEFORE USE

AND SAVE.

Charge the batteries for about 4 hours before initial use.

This equipment is not designed for making emergency

telephony calls when the power fails. Alternative arrangements

should be made for access to emergency services.

Caller ID Compatible

Operating Instructions

Model No.

Digital Cordless Phone

KX-TCD955EC

1

ABC

2

DEF

3

GHI

4

JKL

5

MNO

6

PQRS

7

TUV

8

0

WXYZ

9

RCL

PWR

F

C

INT'

OK

CALLER ID

KX-TCD955EC(001~007) 99.6.28 4:25 PM Page 1

Important Information

2

APPROVED for connection to

telecommunication systems spec-

ified in the instructions for use

subject to the conditions set out

in them.

610109

Do not connect the AC adaptor to any

AC outlet other than the standard AC

230–240 V, 50 Hz.

• Outlet voltage DC1 8 V, 300 mA

Outlet voltage DC2 9 V, 200 mA

• The apparatus is approved for use

with the KX-TCA9E or KX-TCA11E

power supply.

• CAUTION: Do not remove cover.

Live parts inside.

This apparatus has been approved for

the use of the following facilities:

1) Storage of names and telephone

numbers in the phonebook for retrieval

2) Last number redial

3) Simple telephone facility

4) PBX earth register recall (option)

PBX timed break register recall

5) MF signalling

6) LD signalling

7) Pause

8) 1 way paging

9) Call prohibition

10) Call restriction

11) Direct call

12) Intercom between handsets

13) Transferring a call from one handset

to another

14) Conference

15) Setting the call waiting tone

16) Accessing the base unit

17) Caller ID service compatible

Any other usage will invalidate the

approval of the apparatus if as a

result, it then ceases to conform to

the standards against which approval

was granted.

Ringer Equivalence Number (REN):

This relates to the performance of the

apparatus when used in combination

with other items of apparatus. It

enables the calculation of the

maximum number of items of

apparatus that may be connected

simultaneously to the line by

summing the REN values of each

item. A BT supplied instrument has a

REN value of 1 unless otherwise

marked.

Method of connection

This is connected to the exchange

line or PABX/PMBX (Private

Automatic/Manual Branch Exchange)

extension by the new standard British

Telecom plug and socket.

Arrangements for provision of this

type of termination can be made

through the nearest British Telecom

Sales Office. The apparatus may be

connected to the following types of

installation. The apparatus has been

approved for use under the following

conditions:

A maximum REN value of 4 should

not be exceeded. The REN value of

this apparatus is 1.

KX-TCD955EC(001~007) 99.6.28 4:25 PM Page 2

3

a) This apparatus may be used on

telecommunication systems

employing LD and MF signalling. It

is suitable for connection to a

direct exchange line on the PSTN

(Public Switched Telephone

Network) or via a compatible PBX

(Private Branch Exchange).

(Contact the supplier for an up to

date list of compatible PBX’s.)

b) This apparatus is not suitable as

an extension to a payphone or for

use on a party line with shared

service.

This cordless telephone has been

designed to operate on radio

frequencies which have been

assigned to the exclusive use of

cordless telephones. As the use of

cordless telephones becomes more

widespread users may experience a

reduction in the quality of service

obtainable from this apparatus.

Although this equipment can use

either loop disconnected or DTMF

signalling, only the performance of

the DTMF signalling is subject to

regulatory requirements for correct

operation. It is therefore strongly

recommended that the equipment is

set to use DTMF signalling for access

to public or private emergency

services. DTMF signalling also

provides faster call set up.

999 or 112 can be dialled on the

apparatus for the purposes of making

outgoing calls to the BT Emergency

(999 or 112) Service.

WARNING:

The apparatus may be unable to

make emergency 999 or 112

telephone calls, under certain

conditions, e.g.

• Radio interference caused by

another cordless telephone

operating on the same radio

frequency.

• The portable handset battery needs

recharging, or has failed.

• The portable handset cannot be

used while charging.

Any cases of difficulty should be

referred in the first instance to the

supplier of the apparatus.

NOTE:

If you experience any problems with

the normal use of your apparatus,

you should unplug it from the

telephone outlet and connect a

known working telephone in its place.

If the known working telephone still

gives problems, then please contact

the customer service department of

your PSTN operator. If it operates

properly, then the problem is likely to

be a fault in your apparatus. In this

case, contact your supplier for

advice. Your PSTN operator may

charge you if they attend a service

call that is not due to apparatus

supplied by them.

KX-TCD955EC(001~007) 99.6.28 4:25 PM Page 3

Before Initial Use

4

Thank you for purchasing your new Panasonic digital

cordless telephone.

Caller ID, where available, is a telephone company service.After subscribing to Caller ID, this

phone will display the caller’s phone number.

For your future reference

Serial No. Date of purchase

(found on the bottom of the unit)

Name and address of dealer

Included with this unit

AC Adaptor (p.10)

Part No. KX-TCA9E or

KX-TCA11E

one one three

Telephone Line Cord (p.10)

Part No. PQJA87S

Battery (p.9)

Part No. Panasonic P-03H

(BYD PQP25AAA)

one one

Handset Cover (p.9)

Part No. PQKK10091Z2

Belt Clip (p.55)

Part No. PQKE10071Z2

one

Operating Instructions

Part No. PQQX12192Z

KX-TCD955EC(001~007) 99.6.16 5:51 PM Page 4

5

For Best Performance

Battery Charge

Rechargeable Ni-Cd batteries power the handset.

Install the batteries (p.9) and charge them for

about 4 hours before initial use (p.11).

Base Unit Location

Calls are transmitted between the base unit and the handset using wireless radio waves.For

maximum distance and noise-free operation, the recommended base unit location is:

Away from electrical appliances such as a TV,

radio, personal computer or another telephone.

In a HIGH and CENTRAL location with

no obstructions such as walls.

KX-TCD955EC(001~007) 99.6.16 5:51 PM Page 5

Contents

6

Making Calls ..................................16

Answering Calls ............................18

Caller ID Service ...........................19

Using the Caller List .....................20

Viewing the Caller List .................20

Calling Back from the Caller List

..21

Editing the Caller’s Phone

Number ........................................21

Storing Caller List Information

in the Phonebook ........................22

Clearing Caller List Information....23

Chapter 1

Preparation

Chapter 3

Advanced Operations (Special

Programming Features)

Location of Controls ......................8

Display .............................................9

Settings ............................................9

Installing the Batteries in the

Handset .........................................9

Connections ................................10

Battery Charge..............................11

Turning the Power ON..................12

Selecting the Display Language...12

Selecting the Dialling Mode..........13

Selecting the Handset Ringer

Volume/Pattern.............................14

Selecting the Base Unit

Ringer Volume..............................15

Setting the Auto Talk Feature.......15

Summary of Programmable

Functions........................................32

Setting the Password....................34

Direct Call.......................................36

Setting the Direct Call Number

and Mode .....................................36

Dialling the Stored Number..........36

Call Prohibition..............................37

Call Restriction ..............................38

Other Programmable Settings......40

Setting the Key Tones ..................40

Chapter 2

Basic Operations

Using the Phonebook ...................24

Storing Names and Numbers

in the Phonebook ........................24

Finding Items in the Phonebook...26

Dialling from the Phonebook........26

Editing an Item in the

Phonebook ...................................27

Clearing an Item from

the Phonebook .............................27

Special Features ...........................28

How to Use the Pause Feature

(For Analog PBX Line/Long

Distance Service Users) ..............28

Handset Locator...........................29

Temporary Tone Dialling (For

Rotary or Pulse Service Users) ...29

Setting the Key Lock ....................30

Using the Recall Feature..............30

KX-TCD955EC(001~007) 99.6.16 5:51 PM Page 6

7

Chapter 1 Chapter 2 Chapter 3 Chapter 4 Chapter 5

Setting the Range Warning

Alarm............................................40

Setting the Battery Low Alarm......41

Selecting the Talk Mode Display ..41

Clearing the Settings

in Memory ......................................42

Chapter 5

Useful Information

Chapter 4

Multi-Unit User Operations

For Optional Multi-Unit Users.......44

Operating More than One

Handset........................................44

Operating More than One Base

Unit...............................................44

Registration....................................45

Registering a Handset in the

Base Unit......................................45

Selecting the Base Unit Access ...46

Cancelling a Handset...................47

Bell Selection.................................48

Selecting the Stand-by Mode

Display............................................50

Paging/Intercom.............................51

Paging All Handsets from

the Base Unit................................51

Intercom between Handsets.........51

Transferring a Call from One

Handset to Another.......................52

Conference ..................................53

Setting the Call Waiting Tone.......53

Replacing the Batteries.................54

Using the Belt Clip .......................55

Before Requesting Help ...............56

Safety Instructions ........................59

Adding Another Phone..................60

Important Notice Concerning the

Correct Use and Charging of

Ni-Cd (Ni-MH) Batteries.................60

Term Definitions............................61

KX-TCD955EC(001~007) 99.6.16 5:51 PM Page 7

8

Location of Controls

Base unit

Handset

Charge Contacts (p. 11)

Page Button (p. 29, 51)

In Use Indicator ( ) (p. 29, 45)

Charge Indicator ( ) (p. 11)

CALLER ID Indicator (p. 19)

Antenna

CALLER ID

1

ABC

2

DEF

3

GHI

4

JKL

5

MNO

6

PQRS

7

TUV

8

0

WXYZ

9

PWR

RCL

F

C

INT'

OKOK

Display (p. 9)

Talk Button (p. 16, 17)

Function Button

(p. 12, 25, 30, 32)

Recall Button (p. 30)

Charge Contacts (p. 11)

F

Tone Button (p. 29)

Intercom Button

(p. 51)

Navigator Key (I, OKH, G, F)

(p. 12, 18, 20, 26, 32)

Cancel Button

(p. 12, 16, 17, 20, 26, 32)

Power Button (p. 12)

INT

C

RCL

PWR

KX-TCD955EC(008~015) 99.6.28 4:26 PM Page 8

Chapter 1

Preparation

9

Display

Icons

ABCDEFGHIabcdefg

1234567890123456

The in range icon indicates that the

handset is in range of the base unit.It

flashes when the handset is out of

range.

The page/intercom icon is displayed

when paging or using the intercom.It

flashes when another unit pages the

handset.

The talk icon is displayed when

making or answering calls.It flashes

when an outside call is being

received.

The call prohibition icon is displayed

when this mode is turned on (p.37).

The Caller ID icon is displayed when

viewing the Caller List (p. 20) or

“Private ring” is set in the phonebook

(p.24).

The phonebook icon is displayed

when storing or viewing the

phonebook items (p.24).

The battery icon indicates the battery

strength (p.11).

“Pause” is selected while dialling (p.28).

is pressed while dialling.

RCL

P

F

Characters

Installing the Batteries in the Handset

Install the batteries as shown.Then install the handset cover.

•If the rechargeable batteries are not inserted correctly, the handset will not work.

Settings

KX-TCD955EC(008~015) 99.6.16 5:23 PM Page 9

Connections

Plug in the AC adaptor and the telephone line cord to the bottom of the unit.Then connect the

cords as shown.

10

Settings

8V 9V

Fasten the cords to prevent them

from being disconnected.

Hooks

To Mains Outlet

(AC 230–240 V, 50 Hz)

To B.T. Socket

AC Adaptor

Telephone Line Cord

TNV*

Telephone

Line Cord

AC

Adaptor

•USE ONLY WITH Panasonic AC ADAPTOR KX-TCA9E OR KX-TCA11E.

•Be careful not to confuse the telephone line jack with the AC adaptor jack on the base unit.If

connected improperly, the base unit will not work and damage may occur.

•The AC adaptor must remain connected at all times.(It is normal for the adaptor to feel warm during

use.)

•To connect a standard telephone on the same line, see page 60.

•If your unit is connected to a PBX which does not support Caller ID services, you cannot access

those services.

CONNECTION OF POWER SUPPLY

This apparatus is intended for use when powered by the KX-TCA9E or KX-TCA11E.

Using other power supplies will invalidate any approval given to this apparatus.

*The abbreviation TNV means

“Telephone Network Voltage”.

KX-TCD955EC(008~015) 99.6.16 5:23 PM Page 10

Chapter 1

Preparation

11

Battery Charge

At the time of shipment, the batteries are not

charged.To charge, place the handset on the base

unit.Please charge the batteries for about 4 hours

before initial use.

•The charge indicator ( ) lights.

OR

Charge Indicator ( )

Battery strength

Recharge

When “ ” flashes or the unit beeps every

15 seconds, recharge the batteries.

Battery strength

You can check the present battery strength on the display.

3 New Calls 3 New Calls

Base 1

Battery information

After your Panasonic batteries are fully charged:

Operation

Approx. Ni-Cd battery life (Included)

Up to about 6 hours

Up to about 65 hours

While in use (Talk)

While not in use (Stand-By)

Battery icon

Fully charged Medium Low No power

(Flashing)

Approx. Ni-MH battery life (Optional)

Up to about 12 hours

Up to about 130 hours

•Battery life may be shortened depending on usage conditions, such as:

— when viewing the Caller ID Caller List or phonebook, and

— ambient temperature.

•Clean the handset and the base unit charge contacts with a soft, dry cloth once a month.

Clean more often if the unit is subject to grease, dust or high humidity. Otherwise the batteries

may not charge properly.

•If the batteries are fully charged, you do not have to place the handset on the base unit until

“ ” flashes.This will maximise the battery life.

•The batteries cannot be overcharged.

•Nickel metal hydride (Ni-MH) rechargeable batteries (AAA size) are available (see page 54).

•Read “Important Notice Concerning the Correct Use and Charging of Ni-Cd (Ni-MH) Batteries” on

page 60.

KX-TCD955EC(008~015) 99.6.16 5:23 PM Page 11

12

Settings

1 Press .

2 Press G or F until the arrow points to

“Program”.

3 Press OKH.

4 Press G or F until the arrow points to

“Setting Handset”.

5 Press OKH.

6 Press G or F until the arrow points to

“Select Language”.

F

7 Press OKH.

•The current setting is at the arrow.

8 Press G or F to select the desired

language.

9 Press OKH.

•A confirmation tone sounds.

•The display will return to that of step 6, in

the language selected in step 8.To return

to the stand-by mode, press or wait

for 60 seconds.

C

•You can press to go to the next menu

instead of pressing G.

•You can exit the programming mode any time

by pressing .

C

F

Selecting the Display Language

You can choose either German, English, Spanish, Norwegian, French, Italian, Danish, Dutch or

Swedish as the display language.The factory preset is English.

Make sure that the power is ON and the unit is in the stand-by mode.

H

Select Language

Auto Talk

0 New Calls

Base 1

Turning the Power ON

To turn the power OFF, press and hold

until a beep sounds.

•The display will go blank.

•The handset will not ring.

•Depending on the programming mode, you

may not be able to turn the power off. First

make sure the handset is set to the stand-by

mode.

PWR

•You can choose wheter to display the base

unit number, handset number or no display in

the stand-by mode by programming (p. 50).

Press .

•After all possible configurations briefly appear,

the display will change to the following.Then

the handset is in the stand-by mode.

PWR

# The number of new Caller ID calls

received (p.19)

$ The current connected base unit

number (p. 45)

#

$

KX-TCD955EC(008~015) 99.6.16 5:23 PM Page 12

Chapter 1

Preparation

13

Selecting the Dialling Mode

You can program the dialling mode to tone or pulse.If you have touch tone service, set to tone.If

rotary or pulse service is used, set to pulse.The factory preset is tone.

Make sure that the power is ON (p. 12) and the unit is in the stand-by mode.

10 Press OKH.

•A confirmation tone sounds.

•The display will return to “Setting

Base”.To return to the stand-by mode,

press or wait for 60 seconds.

C

1 Press .

2

Press

G or F until the arrow points to

“Program”.

3 Press OKH.

4 Press G or F until the arrow points to

“Setting Base”.

5 Press OKH.

•“Input Command” is displayed.

6 Press .

7 Enter the base unit password.

•The factory preset is 0000.To change the

base unit password, see page 35.

8 Press .

•The current mode is displayed.

1: Tone 2: Pulse

9 To select Pulse, press .

OR

To select Tone, press .

1

2

1

3

F

•If 5 beeps sound in step 7, the entered

password is incorrect.Enter the correct

password.

•You can exit the programming mode any time

by pressing .

C

You can determine which type of local BT

exchange you are connected to using the

following procedure.

1 Ensure that the dialling mode is selected

tone.

2 Press , then identify the dial tone.

3 Dial a number you are familiar with.

4 If the call is successful, you are

connected to a tone exchange.

Therefore, leave the dialling mode as

tone.

5 If the call is not successful, you are

connected to pulse exchange.

Therefore, set the dialling mode to pulse.

Ex.Tone is selected.

Input Command

3

----

Input Command

31 1

KX-TCD955EC(008~015) 99.6.16 5:23 PM Page 13

14

Settings

Ringer Volume

LOW HIGH

1

Press .

2 Press G or F until the arrow points to

“Program”, then press

OKH.

3 Press G or F until the arrow points to

“Setting Handset”, then press

OKH.

4 Press G or F until the arrow points to

“Ringer Volume”, then press

OKH.

•The current volume is displayed and rings.

5 Press G or F to select the desired

level.

•Each time you press a button, the selected

volume is displayed and rings.

F

Selecting the Handset Ringer Volume/Pattern

You can program the desired handset ringer volume and pattern.

Make sure that the power is ON (p. 12) and the unit is in the stand-by mode.

•You can press to go to the next menu

instead of pressing G.

•You can exit the programming mode any time

by pressing .

C

F

Ringer volume

7 levels are available.The lowest level is 1.The

highest level is 6.The factory preset is 3.When

set to OFF, the handset will not ring.

Ringer pattern

You can program the desired handset ringer

pattern (6 patterns).The factory preset is

pattern 1.

6 Press OKH.

•A confirmation tone sounds.

•The display will return to “Ringer

Volume”.To return to the stand-by

mode, press or wait for 60 seconds.

•When set to OFF, “Ringer Off”will

be displayed.

C

•To set to OFF, erase “ ”by pressing G

until “OFF” is displayed.

1 Follow steps 1 to 3 of the ringer volume

procedures.

2 Press G or F until the arrow points to

“Ringer Pattern”.

3 Press OKH.

•The current ringer pattern is at the arrow

and rings.

4 Press G or F to select the desired

pattern.

•Each time you press a button, the selected

ringer pattern will sound.

5 Press OKH.

•A confirmation tone sounds.

•The display will return to “Ringer

Pattern”.To return to the stand-by

mode, press or wait for 60 seconds.

C

Ringer Pattern

H

Ringer 1

Ringer 2

KX-TCD955EC(008~015) 99.6.16 5:23 PM Page 14

Chapter 1

Preparation

15

1 Press .

2 Press G or F until the arrow points to

“Program”, then press

OKH.

3 Press G or F until the arrow points to

“Setting Base”, then press

OKH.

•“Input Command” is displayed.

4 Press TWICE.

•The current volume is displayed.

1: LOW 2: MEDIUM 3: HIGH 0: OFF

2

F

Selecting the Base Unit Ringer Volume

4 levels (HIGH, MEDIUM, LOW, OFF) are available.The factory preset is MEDIUM.When set to OFF,

the base unit will not ring.

Make sure that the power is ON (p. 12) and the unit is in the stand-by mode.

5 Press the desired volume level , ,

or .

•Each time you press a button, the selected

volume is displayed and rings.

6 Press OKH.

•A confirmation tone sounds.

•The display will return to “Setting

Base”.To return to the stand-by mode,

press or wait for 60 seconds.

•You can exit the programming mode any time

by pressing .

C

0

3

2

1

Setting the Auto Talk Feature

The Auto Talk feature allows you to answer a call by lifting the handset off the base unit without

pressing .If you want to use this feature, turn the feature ON.The factory preset is OFF.In

order to view Caller ID information before answering a call, leave the Auto Talk feature OFF.

Make sure that the power is ON (p. 12) and the unit is in the stand-by mode.

•You can press to go to the next menu

instead of pressing G.

•You can exit the programming mode any time

by pressing .

C

F

1 Press .

2 Press G or F until the arrow points to

“Program”, then press

OKH.

3 Press G or F until the arrow points to

“Setting Handset”, then press

OKH.

4 Press G or F until the arrow points to

“Auto Talk”, then press

OKH.

•The current setting is at the arrow.

F

5 Press G or F to select ON or OFF.

6 Press OKH.

•A confirmation tone sounds.

•The display will return to “Auto Talk”.

To return to the stand-by mode, press

or wait for 60 seconds.

C

KX-TCD955EC(008~015) 99.6.16 5:23 PM Page 15

To select the receiver volume

3 levels (HIGH, MEDIUM, LOW) are available.

The factory preset is MEDIUM.

While talking, press

F or G to select the

desired level.

•The display shows the volume level.

•After a few seconds, the display will return to

the length of the call.

OR

In the stand-by mode, proceed as follows.

1 Press .

2 Press G or F until the arrow points to

“Program”, then press

OKH.

3 Press G or F until the arrow points to

“Receiver Volume”, then press

OKH.

4 Press F or G to select the desired

level.

5 Press OKH.

•The display will return to “Receiver

Volume”.To return to the stand-by

mode, press or wait for 60 seconds.

C

F

Receiver Volume

LOW HIGH

16

00-00-00

To dial after confirming the

entered number

1 Enter a phone number.

•The entered number is displayed.

•If you misdial, press I.Digits are erased

from the right.

•To cancel, press I firmly.

•If your line has rotary or pulse service, any

access numbers entered after pressing

will not be included when dialling.

2 Press .

•“ ” is displayed.

•After a few seconds, the display will start

showing the length of the call.

3 To hang up, press or place the

handset on the base unit.

•The handset will return to the stand-by

mode.

Making Calls

Make sure that the power is ON (p. 12).

1 Press .

•“ ” is displayed.

2 Dial a phone number.

•The dialled number is displayed.

•After a few seconds, the display will start

showing the length of the call.

•If “ ”flashes and an alarm tone sounds

after pressing , move closer to the

base unit.Then try again.

•You can choose whether to display the length

of the call or phone number in the talk mode

by programming (p.41).

3 To hang up, press or place the

handset on the base unit.

•The handset will return to the stand-by

mode.

Ex.LOW is selected.

12345678

KX-TCD955EC(016~023) 99.6.16 7:01 PM Page 16

17

Chapter 2

Basic Operations

To redial the last number dialled

1 Press .

2 Press .

3 While “Redial”is at the arrow, press

OKH.

•The last number dialled is automatically

redialled.

F

H

Redial

Go Back

To redial after confirming the

numbers in redial memory

The unit automatically stores the last 10

numbers dialled into redial memory.

1 Press .

2 While “Redial”is at the arrow, press

OKH.

•The last number dialled is displayed.

3 Press G or F until the desired number

is displayed.

•To search from the most recent to oldest

number, press G.To search from the

oldest to most recent number, press F.

•

When the number at the top of the redial

memory is displayed, two beeps will sound.

•To exit the list, press .

4 Press .

•The number is dialled automatically.

•If “No Stored Memory” is displayed in

step 2, the redial memory is empty.

C

F

To clear a number in the redial

memory

1 While the desired number is displayed,

press

OKH.

2 Press G or F until the arrow points to

“Clear”, then press

OKH.

3 Press G or F to select “YES”, then

press

OKH.

To clear all numbers in the redial

memory

Select “All Clear”in step 2 above.

OR

1 Press .

2 Press G or F until the arrow points to

“Program”, then press

OKH.

3 Press G or F until the arrow points to

“Clear Redial”, then press

OKH.

4 Press G or F to select “YES”, then

press

OKH.

F

To store a redial number in the

phonebook

1 While the desired number is displayed,

press

OKH.

2 While “Save Phonebook”is at the

arrow, press

OKH.

•The display shows the number of

remaining phonebook items, then

“<Enter Name>”.

3 To store the name, see page 24, from

step 4.

•If your line has rotary or pulse service, any

access numbers entered after pressing

will not be included when redialling.

H

Redial

Caller ID

New Phonebook

•If the same phone number is stored in the

phonebook (p.24), the name will be displayed.

KX-TCD955EC(016~023) 99.6.16 7:01 PM Page 17

18

To turn the handset ringer off

temporarily

When the handset starts ringing, press G

firmly.

•“Ringer Off” is displayed and the

handset stops ringing.

•The ringer will turn back on for the next call.

•This function will not work when the handset is

on the base unit.

Answering Calls

1 Press .

•You can also answer a call by pressing any

dialling button to , or

(—Any Key Talk).

2 To hang up, press or place the

handset on the base unit.

9

0

Auto talk

If you set the Auto Talk feature to ON (p. 15),

you can answer a call by lifting the handset off

the base unit without pressing .

Make sure that the power is ON (p.12), otherwise the handset will not ring.

If you subscribe to a Caller ID service, the calling party information will be displayed after the first ring

(p.19).In order to view the Caller ID information, please wait until the second ring to answer a call.

•The handset and base unit will not ring if both

ringer volumes are set to OFF (p. 14, 15).

Backlit LCD display

The lighted display will stay on for about

10 seconds after pressing a handset button or

lifting the handset off the base unit.

Ringer Off

KX-TCD955EC(016~023) 99.6.16 7:01 PM Page 18

19

Chapter 2

Basic Operations

Caller ID Service

This unit is compatible with a Caller ID service offered by your telephone company.After subscribing to

a Caller ID service, the calling party’s information will be displayed after the first ring.

The unit can record information of up to 50 different callers in the Caller List.

Using this list, you can automatically call back a caller.You can store a caller’s numbers from the Caller

List in the phonebook.

How caller information is

displayed when a call is

received

The display shows the caller’s phone number

after the first ring.

•After you answer the call, the display will show

the length of the call.

Private name display

If you receive a call from one of the same phone

numbers stored in the phonebook, the caller’s

name will be displayed.

•Caller information cannot be displayed in the

following cases:

— If the caller dialled from an area which does

not provide a Caller ID service, the display

will show “Out of Area”.

— If the caller has requested not to display

his/her information, the display will show

“Private Caller”.

•If your unit is connected to a PBX which does

not support Caller ID services, you cannot

access those services.

Checking the number of new

calls

When new calls have been received, the

CALLER ID indicator flashes on the base unit.In

the stand-by mode, the display shows the

number of new calls.

•For example, if you have received 10 new

calls, the display will show the following:

•To use this function, names and phone

numbers must be stored in the phonebook

(p.24).

1234567890123456

78

Peter Brown

87654321

10 New Calls

Base 1

KX-TCD955EC(016~023) 99.6.28 4:26 PM Page 19

20

12345678

04.27 11:38

Tom West

3456789

04.27 20:30

Using the Caller List

1 Press .

2 Press G or F until the arrow points to

“Caller ID”.

3 Press OKH.

•The most recent caller’s information is

displayed.

F

•If “No Stored Memory” is displayed in

step 3, the Caller List is empty.The display will

return to the stand-by mode.

4 To search from the most recent call,

press G repeatedly.

To search from the oldest call, press F

repeatedly.

•To scroll between callers, press G or F.

5 To exit the list, press .

•The handset will return to the stand-by

mode.

C

Ex.The caller’s name and number are stored

in the phonebook.

Viewing the Caller List

Information of up to 50 different callers is sorted from the most recent to the oldest call in the Caller

List.When the 51st call is received, the oldest call is deleted.Each caller’s phone number, the time

and day received are shown.If a call is received with the private name display function (p.19), the

caller’s name will be shown.

To check who has called, follow the steps below.

Make sure that the power is ON (p. 12) and the unit is in the stand-by mode.

467890

04.27 07:10

•When the same caller calls again, the call

entry with “ ” will be deleted and replaced

with the new call entry.

What “ ” means:

When you have checked new calls, answered

the call or called back the caller, “ ”will be

added to the caller information.

•If more than one call is received from the same

caller, only the date and time of the most

recent call will be recorded.

When viewing long telephone numbers:

If an arrow (→) is displayed after the number the

whole telephone number has not been shown.

Press to see the remaining numbers.

3

123456789012345→

04.27 15:30

←678

04.27 15:30

Press .

3

KX-TCD955EC(016~023) 99.6.16 7:01 PM Page 20

La pagina si sta caricando...

Panasonic KXTCD955 Istruzioni per l'uso

Panasonic KXTCD955 Istruzioni per l'uso

in altre lingue

Documenti correlati

Altri documenti