Toshiba AV505D Manuale del proprietario

Series

AV50*

00GB_AV505D_EngOM.book Page 1 Saturday, November 24, 2007 5:53 PM

00GB_AV505D_EngOM.book Page 2 Saturday, November 24, 2007 5:53 PM

3

English

Contents

SETTING UP

Safety Precautions ..................................................4

Installation and important information ....................5

The remote control .................................................6

Inserting batteries and effective range of the

remote ..........................................................6

Connecting external equipment ..............................7

Connecting an HDMI™ or DVI device to the HDMI

input ...................................................................8

To connect an HDMI device ..............................8

To connect a DVI device ...................................8

Connecting a computer ..........................................9

To connect a PC to the HDMI terminal ..............9

Using the controls ................................................10

Switching on ..................................................10

Using the remote control ...............................10

Using the controls ..........................................10

TUNING THE TELEVISION

Tuning Digital television .......................................11

Tuning for the first time ..................................11

Digital auto tuning .......................................12

Analogue switch-off .....................................12

Digital programme sorting ............................13

Digital manual tuning ...................................13

Tuning Analogue mode ........................................14

Quick Setup ...................................................14

Manual tune ..................................................15

Programme skip ............................................16

Sorting programme positions .........................17

Using Auto tuning ..........................................17

CONTROLS AND FEATURES

General controls ...................................................18

Selecting programme positions ......................18

The Time Display – analogue only ................18

Stereo and Bilingual transmissions .................18

Sound controls .....................................................18

Volume controls and mute sound ...................18

Bass, Treble and Balance ...............................18

Bass boost .....................................................18

Dual – analogue only ...................................18

Stable sound

®

................................................18

Widescreen viewing ..............................................19

Picture controls .....................................................21

Picture position – analogue only ...................21

Backlight .......................................................21

Picture preferences ........................................22

Black stretch ..................................................22

MPEG NR – Noise Reduction ..........................22

DNR – Digital Noise Reduction .......................22

Colour temperature .......................................22

3D Colour management ................................23

Base colour adjustment ..................................23

Active Backlight Control .................................23

Cinema mode ................................................23

Automatic format (Widescreen) ......................23

4:3 stretch .....................................................24

Blue screen ....................................................24

Side panel adjustment ...................................24

Picture still .....................................................24

Panel lock ............................................................24

The timers ............................................................25

Programme timer – digital only .....................25

Sleep timer ....................................................25

Digital on-screen information and

Programme Guide .............................................26

Information ...................................................26

Guide ...........................................................26

Digital settings – parental control ........................27

Setting the PIN ..............................................27

Mode ............................................................27

Digital settings – other features ...........................28

Selecting favourite programmes .....................28

Locking programmes .....................................28

Encrypted programmes ..................................28

Audio languages ...........................................29

Subtitles ........................................................29

Reset TV ........................................................29

Common interface .........................................29

Digital settings – software upgrade ......................30

Version .........................................................30

Auto Upgrade ...............................................30

Searching for new software ...........................30

Input selection and AV connections ......................31

Input selection ...............................................31

INPUT signal selection ...................................31

HDMI1 audio ................................................32

Lip Sync Latency ............................................32

TEXT SERVICES

Analogue text services ..........................................33

Selecting modes ............................................33

Text information ............................................33

Navigating pages using Auto. ........................33

Navigating pages using LIST ..........................33

Control buttons .............................................34

PROBLEM SOLVING

Questions and Answers ........................................35

INFORMATION

Notes ...................................................................38

Specifications and accessories ..............................40

00GB_AV505D_EngOM.book Page 3 Saturday, November 24, 2007 5:53 PM

4

English

SETTING UP

Safety Precautions

This equipment has been designed and manufactured

to meet international safety standards but, like any

electrical equipment, care must be taken to obtain the

best results and for safety to be assured. Please read

the points below for your own safety. They are of a

general nature, intended to help with all electronic

consumer products and some points may not apply to

the goods you have just purchased.

Leave more than 10cm clearance around the television

to allow adequate ventilation. This will prevent

overheating and possible damage to the television.

Dusty places should also be avoided.

Damage may occur if the television is left in direct

sunlight or near a heater. Avoid places subject to

extremely high temperatures or humidity. Place in a

location where the temperature remains between 5°C

(41°F) min. and 35°C (94°F) max.

The mains supply required for this equipment is 220-

240v AC 50/60Hz. Never connect to a DC supply or

any other power source. DO ensure that the television

is not standing on the mains lead.

DO NOT cut off the mains plug from this equipment,

this incorporates a special Radio Interference Filter, the

removal of which will impair its performance.

IF IN DOUBT PLEASE CONSULT A COMPETENT

ELECTRICIAN.

DO

read the operating instructions before you attempt

to use the equipment.

DO

ensure that all electrical connections (including the

mains plug, extension leads and inter-connections

between pieces of equipment) are properly made and

in accordance with the manufacturers’ instructions.

Switch off and withdraw the mains plug before making

or changing connections.

DO

consult your dealer if you are ever in doubt about

the installation, operation or safety of your equipment.

DO

be careful with glass panels or doors on

equipment.

DO NOT

obstruct the ventilation openings of the

equipment with items such as newspapers, tablecloths,

curtains, etc. Overheating will cause damage and

shorten the life of the equipment.

DO NOT

allow electrical equipment to be exposed to

dripping or splashing or objects filled with liquids, such

as vases, to be placed on the equipment.

DO NOT

place hot objects or naked flame sources,

such as lighted candles or nightlights on, or close to

equipment. High temperatures can melt plastic and

lead to fires.

DO NOT

use makeshift stands and NEVER fix legs with

wood screws. To ensure complete safety, always fit the

manufacturers’ approved stand, bracket or legs with

the fixings provided according to the instructions.

DO NOT

leave equipment switched on when it is

unattended, unless it is specifically stated that it is

designed for unattended operation or has a standby

mode. Switch off by withdrawing the plug, make sure

your family know how to do this. Special arrangements

may need to be made for people with disabilities.

DO NOT

continue to operate the equipment if you are

in any doubt about it working normally, or it is

damaged in any way – switch off, withdraw the mains

plug and consult your dealer.

WARNING

– excessive sound pressure from

earphones or headphones can cause hearing loss.

ABOVE ALL – NEVER let anyone, especially

children, push or hit the screen, push anything

into holes, slots or any other openings in the

case.

NEVER guess or take chances with electrical

equipment of any kind – it is better to be safe

than sorry.

Air Circulation

Heat Damage

Mains Supply

Do

DO NOT REMOVE ANY FIXED COVERS AS THIS WILL

EXPOSE DANGEROUS AND 'LIVE' PARTS.

THE MAINS PLUG IS USED AS A DISCONNECTING

DEVICE AND THEREFORE SHOULD BE READILY

OPERABLE.

Do not

00GB_AV505D_EngOM.book Page 4 Saturday, November 24, 2007 5:53 PM

5

SETTING UP

English

Installation and important information

Locate the television away from direct sunlight and

strong lights, soft, indirect lighting is recommended for

comfortable viewing. Use curtains or blinds to prevent

direct sunlight falling on the screen.

Place on a sturdy platform, the mounting surface should

be flat and steady.

It should be secured to the wall

with a sturdy tie using the clip on the back of the

stand, or secured to the platform using the fixing

strap located underneath the table top stand, this

will prevent it from falling over.

The LCD display panels are manufactured using an

extremely high level of precision technology, however

sometimes some parts of the screen may be missing

picture elements or have luminous spots. This is not a

sign of a malfunction.

Make sure the television is located in a position where it cannot be pushed or hit by objects, as pressure will break

or damage the screen, and that small items cannot be inserted into slots or openings in the case.

• The digital reception function of this television is only effective in the countries listed in the “COUNTRY SET UP” section of the

“DIGITAL MENU”. Depending on country/area, some of this television's functions may not be available. Reception of future

additional or modified services can not be guaranteed with this television.

• If stationary images generated by 4:3 broadcasts, text services, channel identification logos, computer displays, video games, on

screen menus, etc. are left on the television screen for any length of time they could become conspicuous, it is always advisable

to reduce both the brightness and contrast settings.

• Very long, continuous use of the 4:3 picture on a 16:9 screen may result in some retention of the image at the 4:3 outlines, this

is not a defect of the LCD TV and is not covered under the manufacturers warranty. Regular use of other size modes (eg:

Superlive) and varying the “side panel” brightness (if available on the model) will prevent permanent retention.

Where to install

Please take note

EXCLUSION CLAUSE

Toshiba shall under no circumstances be liable for loss and/or damage to the product caused by:

i) fire;

ii) earthquake;

iii) accidental damage;

iv) intentional misuse of the product;

v) use of the product in improper conditions;

vi) loss and/or damage caused to the product whilst in the possession of a third party;

vii) any damage or loss caused as a result of the owner’s failure and/or neglect to follow the instructions set out in the owner’s

manual;

viii) any loss or damage caused directly as a result of misuse or malfunction of the product when used simultaneously with

associated equipment;

Furthermore, under no circumstances shall Toshiba be liable for any consequential loss and/or damage including but not limited

to the following, loss of profit, interruption of business, the loss of recorded data whether caused during normal operation or

misuse of the product.

NOTE:

A Toshiba wall bracket or stand, where available, must be used. If a non Toshiba wall bracket or stand is used the product’s

BEAB approval will become void and the equipment is then used at the consumers own risk.

Sturdy tie

(as short as possible)

Side View Top View

Clip

00GB_AV505D_EngOM.book Page 5 Wednesday, November 28, 2007 3:13 PM

6

SETTING UP

English

The remote control

Simple at-a-glance reference of your remote

control.

1

For On/Standby mode

2

To mute the sound

3

Number buttons

4

To return to the previous programme

5

To select input from external sources,

analogue

or

digital

TV

6

To switch between TV, Radio and Favourite programmes

when in

digital

mode

7

To display the

digital

on-screen Programme Guide

8

On-screen Menus

9

To exit Menus

10

When using menus press

U

(up),

u

(down),

I

(left) and

i

(right) to move the cursor on the screen.

Q

to confirm

your selection

11

To alter the volume

12

To change programme positions and text pages

13

Selectable picture preferences

14

Widescreen viewing

15

To display on-screen information

16

To call up text services

17

When in TV mode:

r

Still picture

s

Stereo/bilingual transmissions

SUBTITLE Digital Subtitles

D

Time display

When using the Programme Guide:

Z

– 24 hours

z

+ 24 hours

CC

– 1 page

cc

+ 1 page

18

Text and interactive service control buttons

Remove the back cover to reveal

the battery compartment and

make sure the batteries are

inserted the right way round.

Suitable battery types for this

remote are AAA, IEC R03 1.5V.

Do not combine a used, old

battery with a new one or mix

battery types. Remove dead batteries immediately to prevent

acid from leaking into the battery compartment. Dispose of

them in a designated disposal area.

Warning:

batteries must

not be exposed to excessive heat such as sunshine, fire or the

like.

The performance of the remote control will deteriorate beyond

a distance of five metres or outside an angle of 30 degrees

from the centre of the television. If the operating range

becomes reduced the batteries may need replacing.

1

6

9

10

11

15

12

16

13

1

7

5

2

3

4

7

8

14

18

Inserting batteries and effective range of

the remote

00GB_AV505D_EngOM.book Page 6 Saturday, November 24, 2007 5:53 PM

7

SETTING UP

English

Connecting external equipment

Before connecting any external equipment, turn off all main power switches. If there is no switch

remove the mains plug from the wall socket.

Aerial cables:

- - - - - - - - - - - - - - - - - - - - - -

Connect the aerial to the socket on the rear of the television.

If you use a decoder* and/or a media recorder it is essential

that the aerial cable is connected through the decoder and/or

through the media recorder to the television.

SCART leads:

. . . . . . . . . . . . . . . . . . . . . . . . . .

Connect the video recorder

IN

/

OUT

socket to the television.

Connect the decoder

TV

socket to the television. Connect the

media recorder

SAT

socket to the decoder

MEDIA REC

. socket.

Before running

Auto tuning

put your decoder and media

recorder to

Standby

.

The phono sockets alongside the COMPONENT VIDEO INPUT

sockets will accept L and R audio signals.

The phono sockets alongside the VIDEO INPUT socket will

accept L and R audio signals.

HDMI™ (High-Definition Multimedia Interface) is for use with

a DVD, decoder or electrical equipment with digital audio and

video output. It is designed for best performance with 1080i

high-definition video signals but will also accept and display

VGA, 480i, 480p, 576i, 576p and 720p signals.

NOTE:

Although this television is able to connect to HDMI

equipment it is possible that some equipment may not operate

correctly.

A wide variety of external equipment can be connected

to the back of the television, therefore the relevant

owners manuals for

all

additional equipment must be

referred to.

We recommend

SCART 1

for a decoder and

SCART 2

for a

media recorder.

If connecting S-VIDEO equipment, set the

INPUT

for

EXT2

.

See

page 31

.

If the television automatically switches over to monitor external

equipment, return to normal television by pressing the desired

programme position button. To recall external equipment,

press

o

to select between

DTV

,

EXT1

,

EXT2

,

EXT3

,

EXT4

,

HDMI1

,

HDMI2

or

ATV

.

IN/OUT

MEDIA REC.

TV

SAT

COMPONENT VIDEO INPUT (EXT3)

HDMI™ INPUT

SOCKETS

SCART 2 (EXT2)

FIXING STRAP

SCART 1 (EXT1)

decoder*

media recorder

*a decoder could

be Digital Satellite or

any other compatible

decoder.

VIDEO INPUT (EXT4)

The cable holder can

be used for aerial, media

recorder and audio cables.

Do not use as a handle and

remove all cables before

moving the television.

CABLE HOLDER

HDMI, the HDMI logo, and High-Definition Multimedia Interface are

trademarks or registered trademarks of HDMI Licensing, LLC.

00GB_AV505D_EngOM.book Page 7 Saturday, November 24, 2007 5:53 PM

8

SETTING UP

English

Connecting an HDMI™ or DVI

device to the HDMI input

The HDMI input on your television receives digital

audio and uncompressed digital video from an

HDMI source device, or uncompressed digital video

from a DVI (Digital Visual Interface) source device.

This input is designed to accept HDCP (High-Bandwidth

Digital-Content Protection) program material in digital form

from EIA/CEA-861-D–compliant

[1]

consumer electronic

devices (such as a set-top box or DVD player with HDMI or DVI

output). For acceptable video signal formats, see page 9.

NOTE:

• Some early HDMI equipment may not work properly with

your latest HDMI TV, due to the adoption of a new standard.

• Supported Audio format: Linear PCM, sampling rate 32/

44.1/48kHz.

Connect an HDMI cable (type A connector) to the HDMI

terminal.

For proper operation, it is recommended that you use an HDMI

cable with the HDMI Logo ( ).

• HDMI cable transfers both video and audio. Separate analog

audio cables are not required (see illustration).

• See “HDMI1 audio” on page 32.

To view the HDMI device video, press the

o

to select HDMI1

or HDMI2 mode.

Connect an HDMI-to-DVI adapter cable (HDMI type A

connector) to HDMI1 terminal and audio cables to the HDMI1

Audio socket (see illustration).

• The recommended HDMI-to-DVI adapter cable length is 6.6

ft (2m).

• An HDMI-to-DVI adapter cable transfers video only.

Separate analog audio cables are required.

• See “HDMI1 audio” on page 32.

NOTE:

To ensure that the HDMI or DVI device is reset properly, it is

recommended that you follow these procedures:

• When turning on your electronic components, turn on the

television first, and then the HDMI or DVI device.

• When turning off your electronic components, turn off the

HDMI or DVI device first, and then the television.

To connect an HDMI device

HDMI

OUT

VIDEO AUDIO

L R

R

L

OUT

IN

HDMI cable

HDMI device

To connect a DVI device

DVI / HDCP

OUT

VIDEO AUDIO

L R

R

L

OUT

IN

HDMI-to- DVI adapter Cable

Audio cable for HDMI to

television connection

(not supplied)

DVI device

[1] EIA/CEA-861-D compliance covers the transmission of uncompressed

digital video with high-bandwidth digital content protection, which is

being standardized for reception of high-definition video signals. Because

this is an evolving technology, it is possible that some devices may not

operate properly with the television.

HDMI, the HDMI logo and High-Definition Multimedia Interface are

trademarks or registered trademarks of HDMI Licensing LLC.

00GB_AV505D_EngOM.book Page 8 Saturday, November 24, 2007 5:53 PM

9

SETTING UP

English

Connecting a computer

With the HDMI connection, you can watch your computer’s display on the television and hear the sound

from the televisions speakers.

When connecting a PC to the HDMI terminal on the television, use an HDMI-to DVI adapter cable and analog audio cables.

If connecting a PC with an HDMI terminal, use an HDMI cable (type A connector). Separate analog cables are not necessary (see

page 8).

For acceptable PC signal formats, see “Acceptable video or PC singnals through HDMI terminals”.

NOTE:

The edges of the images may be hidden.

Acceptable video or PC signals through HDMI terminals

To connect a PC to the HDMI terminal

Format Resolution V. Frequency H. Frequency Pixel Clock Frequency

480i 720 × 480i 59.940/60.000Hz 15.734/15.750kHz 27.000/27.027MHz

576i 720 × 576i 50.000Hz 15.625kHz 27.000MHz

480p 720 × 480p 59.940/60.000Hz 31.469/31.500kHz 27.000/27.027MHz

576p 720 × 576p 50.000Hz 31.250kHz 27.000MHz

1080i 1920 × 1080i 59.940/60.000Hz 33.716/33.750kHz 74.176/74.250MHz

1080i 1920 × 1080i 50.000Hz 28.125kHz 74.250MHz

720p 1280 × 720p 59.940/60.000Hz 44.955/45.000kHz 74.176/74.250MHz

720p 1280 × 720p 50.000Hz 37.500kHz 74.250MHz

VGA 640 × 480p 59.940/60.000Hz 31.469/31.500kHz 25.175/25.200MHz

the back of your television

Computer

Audio cable for PC to

television connection

(not supplied)

HDMI-to-DVI adapter cable

00GB_AV505D_EngOM.book Page 9 Saturday, November 24, 2007 5:53 PM

10

SETTING UP

English

Using the controls

Whilst all the necessary adjustments and controls for the television are made using the remote control, the

buttons on the television may be used for some functions

.

If the RED LED is unlit check that the mains plug is connected

to the power supply. If the picture does not appear press

1

on

the remote control, it may take a few moments.

To put the television into Standby press

1

on the remote

control, the GREEN active standby LED will appear (

see

‘Software Upgrade’ section

) next to the RED for a few moments

then disappear. To view the television press

1

again. The

picture may take a few seconds to appear.

Press

M

on the remote control to see the menus.

In

digital

mode the menu bar at the top of the screens will

show three different topics shown in symbols. As each symbol

is selected by pressing the

I

or

i

button on the remote control,

its respective options will appear below.

In

analogue

mode the menu appears as a list of five topics.

As each symbol is selected by pressing

I

or

i

on the navigation

ring on the remote control, its respective options will appear

below.

To use the options press the

U

and

u

button on the remote

control to move up and down through them and

Q

,

I

or

i

to

select the required choice. Follow the on-screen instructions.

The functions of each menu are described in detail throughout

the manual.

To alter the volume press –

2

+.

To alter the programme position press

b

p

B

.

Press

MENU

and

I

,

i

,

U

or

u

to control the sound and picture

options.

Press

MENU

to finish.

To select the external input, press

o

until the appropriate

input source is selected as described on

page 31

.

Please always refer to the owner’s manual of the equipment to

be connected for full details.

Please note:

Inserting the headphone plug will mute the sound

from all speakers.

StandbyRED LED – Standby

GREEN LED – Power on

Headphone jack

GREEN LED - Active standby (

digital

only)

COMMON INTERFACE

The Common Interface

is for a Conditional

Access Module (CAM).

Contact a service

provider.

Switching on

Using the remote control

Using the controls

00GB_AV505D_EngOM.book Page 10 Saturday, November 24, 2007 5:53 PM

11

English

TUNING THE TELEVISION

Tuning Digital television

Before switching on the television put your decoder

and media recorder to

Standby

if they are

connected.

To set up the television use the buttons on the

remote control as detailed on page 6.

a

Press the

1

button, the

LOCAL OPTIONS

screen will

appear. This screen will appear the first time that the

television is switched on and each time the television

is reset.

b

Press

u

to highlight

Country

and

I

or

i

to select. The

television will now tune the stations for your country.

c

Using

u

highlight

Language

, then

I

or

i

to select.

d

Press

Q

to start tuning.

The

AUTO TUNING

screen will appear and the

television will start to search for available stations. The

progress bar will move along the line.

You must allow the television to complete the

search.

When the search is complete the television will

automatically select programme one.

The

AUTO TUNING

screen will display the total

number of services found.

e

Use

u

or

U

to move through the list to select a

programme then press

Q

to view.

NOTE:

The time will be set automatically by

transmission but can be advanced or decreased by up

to 3 hours using

Local Time Settings

.

Tuning for the first time

LOCAL OPTIONS

Country UK

Language ENGLISH

Audio Language ENGLISH

Subtitles OFF

Local Time Settings 0

Continue

EXIT

70 34

87 21

Cancel

AUTO TUNING

Progress

Prog. Name Type UHF Quality

CBBC Channel GOOD

Community POOR

134

2 34

3 31

4 31

5 48

6 31

Change Watch

Page Up Page Down Sort

AUTO TUNING

94 programmes found

Press OK to watch programme

Prog. Name Type UHF Quality

BBC ONE GOOD

GOOD

BBC TWO

ITV1

Channel 4 POOR

POOR

Five

ITV2

58 TV 27 Radio 9 Text

00GB_AV505D_EngOM.book Page 11 Saturday, November 24, 2007 5:53 PM

12

TUNING THE TELEVISION

English

NOTE:

As new services are broadcast it will be necessary to re-

tune the television in order to view them.

Auto tuning

will completely re-tune the television and can be

used to up date the channel list.

It is recommended that Auto tuning is run periodically to

ensure that all new services are added

. All current

programmes and settings, i.e. favourites and locked

programmes, will be lost.

a

Press

M

, the

SETUP MENU

will appear.

Use

u

to highlight

Auto tuning

. Press

Q

.

b

A screen will appear warning that previous digital

programmes and settings will be deleted.

Press

Q

to continue with the

Auto tuning

.

The television will start to search for all available

stations.

You must allow the television to complete the

search.

When the search is complete the

Auto tuning

screen

will display the total number of services found.

c

Use

u

or

U

to move through the list to select a

programme then press

Q

to view.

This is a

digital

television which is integrated to allow the use

of both

digital

and

analogue

services. However, during the

lifetime of this set it is very likely that

analogue

services will

be switched off to allow for more new

digital

services.

This ‘switch-off’ will happen in a number of phases, which will

be advertised in your area well in advance. It is recommended

that at each phase the television is re-tuned to ensure that

existing and new

digital

services can be viewed without

disruption (

see the

'Auto tuning'

section

).

Digital

auto tuning

!

MENU

WARNING

All previous digital programmes and

settings will be deleted.

Continue?

YES

Select Cancel

EXIT

70 34

87

21

Cancel

AUTO TUNING

Progress

Prog. Name Type UHF Quality

CBBC Channel GOOD

Community POOR

Analogue

switch-off

1

2

3

4

5

6

MENU

34

31

48

31

AUTO TUNING

94 programmes found

58 TV 27 Radio 9 Text

Press OK to watch programme

BBC ONE GOOD

GOOD

BBC TWO

ITV1

Channel 4

Five

ITV2

Change Watch

Back

Page Up Page Down Sort

POOR

Prog. Name Type UHF Quality

00GB_AV505D_EngOM.book Page 12 Saturday, November 24, 2007 5:53 PM

13

TUNING THE TELEVISION

English

NOTE:

When the television is switched off the mode being

viewed at the time will automatically be selected when the

television is switched back on.

a

The station order may be changed to suit personal

preference. Press

M

, the

SETUP MENU

will appear

on screen.

b

Use

u

to move down through the list and highlight

Programmes

. Press

Q

.

c

With the list of stations now showing use

u

or

U

to

highlight the station you want to

move

and press

i

.

The selected station will be moved to the right of the

screen.

d

Use

u

or

U

to move through the list to your

preferred

position. As you do so the other stations will move to

make room.

e

Press

I

to store your move. Repeat as necessary, then

press

P

.

This feature is available for service engineers or can be

used for direct channel entry if the multiplex channel

is known.

a

Select

Manual tuning

from the

SETUP MENU

and

press

Q

.

b

Enter the multiplex number using the number buttons

and then press

Q

. The television will automatically

search for that multiplex.

When the multiplex is found any channels not currently

on the programme list will be added and the

programme information at the top of the screen will be

updated.

c

Repeat as necessary. Press

P

to finish.

Digital

programme sorting

OK

MENU EXIT

SETUP MENU

TV Setup

Local Options

Auto tuning

Manual tuning

Programmes

Back

Watch TV

MENU EXIT

1

2

3

4

5

6

Sort Store Back Watch TV

Page Up Page Down

PROGRAMMES

Prog. Name

BBC ONE

BBC TWO

ITV1

Channel 4

Five

ITV2

Digital

manual tuning

00GB_AV505D_EngOM.book Page 13 Saturday, November 24, 2007 5:53 PM

14

TUNING THE TELEVISION

English

Tuning Analogue mode

The

Quick Setup

feature will tune all

analogue

channels

currently available in the area. To put the television into

ATV

mode press the

o

button then use

U

or

u

to select

ATV

.

a

Select

ATV

mode. The

Quick Setup

screen will

appear.

b

Using

I

or

i

select your

language

, then press

Q

.

c

Then press

I

or

i

to select your

country

.

d

To start

Auto tuning

press

Q

.

e

The search will begin for all available stations.

The slide bar will move along the line as the search

progresses.

You must allow the television to complete the

search.

When the search is complete the television will

automatically select programme position 1 and the

Manual tuning

screen will appear.

f

Use

u

or

U

to move through the list to select a

programme then press

P

to view.

The station order may be changed using the

Manual

tuning

screen (

see the

analogue

‘Sorting programme

positions’ section

).

Quick Setup

Select your language.

Language English

EXIT

Watch TV

OK

Searching

Channel : C22 Station : BBC1

EXIT

Stop

1 C22 BBC1

2 C28 BBC2

3C25ITV

4 C32 CH4

5C68

6C69

OK

MENU EXIT

Manual tuning

Prog. Channel Station

Select Sort

Back Watch TV

00GB_AV505D_EngOM.book Page 14 Saturday, November 24, 2007 5:53 PM

15

TUNING THE TELEVISION

English

The television can be tuned-in manually using

Manual

tuning

. For example: if the television cannot be connected to

a media recorder/decoder with a SCART lead or to tune-in a

station on another

System

.

Use

I

and

i

to move across the screen and select any of these

Manual Tune options.

1

Programme:

The number to be pressed on the remote control.

2

System:

Specific to certain areas.

3

Colour system:

Factory set to Auto, should only be changed if problems

are experienced, i.e. NTSC input from external source.

4

Programme skip:

8

means nothing has been stored or the facility to skip

the channel is ON. See page 16.

5

Channel:

The channel number on which a station is being broadcast.

6

Search:

Search up and down for a signal.

7

Manual fine tuning:

Only used if interference/weak signal is experienced. See

page 35.

8

Station:

Station identification. Use the

U

or

u

and

I

or

i

buttons to

enter up to seven characters.

To allocate a programme position on the television for a

decoder and media recorder: turn the decoder on, insert a

pre-recorded film in the media recorder and press PLAY, then

manually tune.

a

Press

M

and using

I

or

i

select the

SET UP

menu,

with

u

highlight

Manual tuning

, press

Q

to select.

b

Use

U

or

u

to highlight the programme position

required

e.g.

we suggest

Prog. 0

for a media recorder.

c

Press

Q

to select. If the programme is skipped,

Programme skip

must be removed before storing.

d

Press

i

to select

System

and use

U

or

u

to change if

required.

e

Then press

i

to select

Search

.

f

Press

U

or

u

to begin the search. The search symbol

will flash.

Manual tune

Manual tuning

System

0 I A C 60 0

OK

Store

MENU

Back

EXIT

Watch TV

123 4 5 6 7 8

V C R

Different

Channel

numbers may be displayed.

SET UP

Language English

Country UK

Auto tuning

OK

Manual tuning

OK

AV connection

OK

Picture position

OK

MENU

Back

EXIT

Watch TV

1/2

Manual tuning

Prog. Channel Station

0 C60

1 C22 BBC1

2 C28 BBC2

3 C25 ITV

4 C32 CH4

5 C69

OK

Select Sort

MENU

Back

EXIT

Watch TV

Manual tuning

System

0 I A C 60 0

OK

Store

MENU

Back

EXIT

Watch TV

Manual tuning

Search: Up

0 I A C 60 0

OK

Store

MENU

Back

EXIT

Watch TV

00GB_AV505D_EngOM.book Page 15 Saturday, November 24, 2007 5:53 PM

16

TUNING THE TELEVISION

English

g

Each signal will show on the television, if it is not your

media recorder, press

U

or

u

again to restart the

search.

h

When your media recorder signal is found, press

i

to

move along to

Station

. With

U

,

u

,

I

and

i

put in the

required characters,

e.g.

VCR

.

i

Press

Q

to store.

j

Repeat for each

programme position

you want to

tune or, press

M

to return to the list of channels and

select the next number to tune.

k

Press

P

when you have finished.

l

To name external equipment,

e.g.

DVD on EXT2, press

o

to select

o

2, then select

Manual setting

from the

SET UP

menu.

m

Press

i

to select

Label

then using

U

,

u

,

I

and

i

put in

the required characters.

To prevent certain programmes from being viewed, the

programme position can be skipped. The remote control must

be removed as the channels will still be available using the

number buttons. Programmes can then be watched as normal

using the controls on the television, but the television will not

show the skipped programme position.

a

Select

Manual tuning

from the

SET UP

menu.

b

Use

U

or

u

to highlight the programme position to be

skipped and press

Q

to select.

c

Press

i

to select

Programme skip

.

d

Use

U

or

u

to turn

Programme skip

on.

Press

Q

.

8

on the screen indicates a skipped programme

position.

e

Press

M

and repeat from

Step 2

or press

P

.

Each programme position has to be

individually

selected. To turn

Programme skip

off, repeat the

procedure for each position.

Skipped programme positions

cannot

be selected by

>

and

<

or by the controls on the television, but

can

still be accessed by the number buttons on the

remote control.

PLEASE NOTE

This television has direct channel entry if the channel

numbers are known.

Select the

Manual tuning

screen in

Step 3

. Enter

the

Programme number

, the

System

, then

C

for

standard (terrestrial) channels or

S

for cable

channels and the

Channel

number. Press

Q

to

store.

0 I A C 60 0 V C R

OK

MENU EXIT

Manual tuning

Station

Store

Back Watch TV

EXT2 A D V D

OK

MENU EXIT

Manual setting

Label

Store

Back Watch TV

Programme skip

1 C22 BBC1

2 C28 BBC2

3C25ITV

4 C32 CH4

5C68

6C69

OK

MENU EXIT

Manual tuning

Prog. Channel Station

Select Sort

Back Watch TV

1 I A C 22 0 B B C 1

OK

MENU EXIT

Manual tuning

Programme skip : On

Store

Back Watch TV

00GB_AV505D_EngOM.book Page 16 Saturday, November 24, 2007 5:53 PM

17

TUNING THE TELEVISION

English

Channels may be moved and stored on the programme position

of your choice.

a

Select

Manual tuning

from the

SET UP

menu.

b

With the list of stations now showing use

U

or

u

to

highlight the station you want to

move

and press

i

.

The selected station will be moved to the right of the

screen.

c

Use

U

or

u

to move through the list to your

preferred

position. As you do so the other stations will move to

make room.

d

Press

I

to store your move.

Repeat as necessary, then press

P

.

a

To set up the television using

Auto tuning

, press

M

and use

I

or

i

to select the

SET UP

menu.

b

Press

u

to highlight

Language

and

I

or

i

to select.

c

Using

u

highlight

Country

, then

I

or

i

to select. The

television will now tune the stations for your country.

d

Press

u

to highlight

Auto tuning

, then press

Q

.

e

To start

Auto tuning

press

Q

.

You must allow the television to complete the search.

When the search is complete the television will automatically

select programme position 1. This may not be a clear picture,

so the station order can be changed

(see ‘Sorting programme

positions’ section).

Sorting programme positions

Manual tuning

Prog. Channel Station

1 C22 BBC1

2 C28 BBC2

3 C25 ITV

4 C32 CH4

5C68

6C69

Store

MENU

Back

EXIT

Watch TV

Using Auto tuning

OK

MENU EXIT

1/2

SET UP

Language English

Country UK

Auto tuning

Manual tuning

AV connection

Picture position

Back Watch TV

MENU EXIT

!

Auto tuning

Previous settings will be lost !

Press EXIT for no change.

Press OK to start Auto tune.

Back Watch TV

00GB_AV505D_EngOM.book Page 17 Saturday, November 24, 2007 5:53 PM

18

English

CONTROLS AND FEATURES

General controls

To select a programme position use the numbered buttons on

the remote control.

Programme positions can also be selected using

>

and

<

.

To revert to the previous programme position press .

To display on-screen information

i.e.

programme position,

input mode or stereo/mono signal, press . Press again to

cancel.

The time display facility allows the current (text service) time to

be seen on the television screen.

Press

D

whilst watching a normal television broadcast to

see a time display from the broadcaster. It will remain on

screen for about 5 seconds.

If stereo or dual language broadcasts are transmitted the word

Stereo or Dual will appear on the screen each time programme

positions are changed, disappearing after a few seconds. If the

broadcast is not in stereo the word Mono will appear.

Stereo…

Press

s

to select

Stereo

or

Mono

.

Bilingual…

Bilingual transmissions are rare. If they are

transmitted the word

Dual

will display. Choose the required

programme number and if the word

Dual

appears press

s

to select

Dual 1

,

Dual 2

or

Mono

.

Sound controls

Volume

Press

Y

or

y

to adjust the volume.

Sound Mute

Press once to turn the sound off and again to cancel.

The sound controls are accessible in

digital

and

analogue

modes, as are most of the televisions features.

a

In

digital

mode, press

M

and using

u

highlight

TV

Setup

then press

Q

.

b

Use

I

or

i

to select

SOUND

.

c

In

analogue

mode, press

M

and

I

or

i

to select

SOUND

.

d

Press

u

to highlight

Bass

,

Treble

or

Balance

and

I

or

i

to change the setting.

Bass boost

enhances the depth of the sound on the TV

speakers. The difference will only be noticeable on sound with

a strong bass.

a

In the

SOUND

menu press

u

to highlight

Bass boost

.

Use

I

or

i

to select

On

.

b

Then press

u

to highlight

Bass boost level

and using

I

or

i

adjust to suit your preference.

If a programme or film is being broadcast with a soundtrack in

more than one language, the

DUAL

feature allows selection

between them.

a

Press

M

and select the

SOUND

menu.

b

Use

u

to highlight

Dual

then press

I

or

i

to choose

between

Dual 1

or

Dual 2

.

The

Stable Sound

feature limits high volume levels on the TV

speakers, preventing the extreme changes in volume that can

occur when channels are changed or a programme switches to

a commercial.

a

Select the

SOUND

menu.

b

Use

u

to highlight

Stable sound

then press

I

or

i

to

select

On

or

Off

.

Selecting programme positions

The Time Display –

analogue

only

Stereo and Bilingual transmissions

Volume controls and mute sound

Bass, Treble and Balance

Bass boost

Dual –

analogue

only

Stable sound

®

0

MENU EXIT

1/2

SOUND

Dual Dual 1

Bass

Treble

Balance

Back Watch TV

Stable sound On

Bass boost On

00GB_AV505D_EngOM.book Page 18 Saturday, November 24, 2007 5:53 PM

19

CONTROLS AND FEATURES

English

Widescreen viewing

Depending on the type of broadcast being transmitted, programmes can be viewed in a number of formats.

Press repeatedly to select between

4:3

,

Super Live 1

,

Cinema 1

,

Subtitle

,

14:9

,

Wide

,

Super Live 2

,

Cinema 2

and

PC

.

SUPER LIVE 1

SUPER LIVE 2

CINEMA 1

CINEMA 2

SUBTITLE

This setting will enlarge a 4:3 image

to fit the screen by stretching the

image horizontally and vertically,

holding better proportions at the

centre of the image. Some distortion

may occur.

If a ‘side panel format’ signal is

being received this setting will

enlarge the image to fit the screen by

stretching the image horizontally

and vertically, holding better

proportions at the centre of the

image. Some distortion may occur.

When watching ‘letterbox format’

films/video tapes, this setting will

eliminate or reduce the black bars at

the top and bottom of the screen by

zooming in and selecting the image

without distortion.

When watching ‘all sides panel

format’ films/video tapes, this setting

will eliminate or reduce the black

bars at all sides of the screen by

zooming in and selecting the image

without distortion.

When subtitles are included on a

letterbox format broadcast, this

setting will raise the picture to ensure

that all the text is displayed.

00GB_AV505D_EngOM.book Page 19 Saturday, November 24, 2007 5:53 PM

20

CONTROLS AND FEATURES

English

Press and a list of all the widescreen formats will appear on screen.

Use

U

and

u

to highlight the required format and

Q

to select.

Using the special functions to change the size of the displayed image (i.e. changing the height/width ratio)

for the purposes of public display or commercial gain may infringe on copyright laws.

14:9

WIDE

4:3

Use this setting when watching a

14:9 broadcast.

Use this setting when watching a

widescreen DVD, widescreen video

tape or a 16:9 broadcast (when

available). Due to the range of

widescreen formats (16:9, 14:9,

20:9 etc.) black bars may be visible

on the top and bottom of the screen.

Use this setting to view a true 4:3

broadcast.

PC

When using a PC connected via HDMI

this setting will show the picture

without over scan, i.e. WYSIWYG.

This option is only available when

watching 1080i or 720p source via

HDMI.

PC

Wide

Super Live 2

Cinema 2

4:3

Super Live 1

Cinema 1

Subtitle

14:9

00GB_AV505D_EngOM.book Page 20 Saturday, November 24, 2007 5:53 PM

La pagina sta caricando ...

Toshiba AV505D Manuale del proprietario

Toshiba AV505D Manuale del proprietario

in altre lingue

Documenti correlati

Altri documenti