Toshiba REGZA C300 Serie Manuale utente

C300*

C350*

R350*

Series

TOSHIBA

pg

English

3

Contents

SETTING UP

Safety precautions – Some do’s and don’ts for you to be aware of 4

Installation and important information 5

The remote control – an at-a-glance guide 6

Connecting external equipment – a guide to connecting external equipment to the back of

the television 7

Connecting a computer – connecting a computer to the back of the television 8

Connecting REGZA-LINK – connecting Toshiba REGZA-LINK equipment 9

Controls and input connections – switching on the television, standby, using the controls,

headphone socket, connecting equipment to the side input sockets 10

Tuning the television using Quick Setup – language, country 11

Sorting programme positions 11

Manual tune – an alternative to Quick Setup, direct entry of channels, tuning a programme

position for a media recorder 12

Programme skip 13

Auto tune 14

CONTROLS AND FEATURES

General controls – changing programme position 14

Sound controls – volume, sound mute, bass/treble/balance 14

Sound controls – bass boost, super woofer, dual, stable sound

®

15

SRS WOW™ sound effects – SRS 3D, FOCUS, TruBass 15

Widescreen viewing 16

Picture controls – picture position, back light 18

Picture controls – picture preferences (contrast, brightness, colour, tint, sharpness), black stretch,

MPEG noise reduction (MPEG NR), digital noise reduction (DNR), colour temperature 19

Picture controls – 3D colour management, base colour adjustment, active backlight control,

cinema mode 20

Picture controls – automatic format (widescreen), 4:3 stretch, blue screen, side panel adjustment,

picture still 21

Panel lock – disabling the buttons on the television 22

Time display 22

Stereo and bilingual transmissions – stereo/mono or dual language broadcasts 22

The timer – setting the television to turn on and off 22

PC Setting – picture position, clock phase, sampling clock, reset 23

REGZA-LINK controls – general information, input source selection 24

REGZA-LINK menus – enable REGZA-LINK 25

REGZA-LINK menus – TV auto input switch, TV auto power, auto standby, speaker preference 26

Input selection and AV connections – input and output sockets for connected equipment, lip sync 27

TEXT SERVICES

Setting up, general information, Auto. and LIST modes 29

Control buttons 30

PROBLEM SOLVING

Questions and Answers – answers to some of the more common queries including

manual fine tuning and colour system 31

INFORMATION

Notes – for your own records 33

Information – signal information 35

Specifications and Accessories – technical information about the television, supplied accessories 36

gg

English

4

Safety Precautions

This equipment has been designed and manufactured to meet international safety standards but, like any

electrical equipment, care must be taken to obtain the best results and for safety to be assured. Please read

the points below for your own safety. They are of a general nature, intended to help with all electronic

consumer products and some points may not apply to the goods you have just purchased.

Leave more than 10cm clearance around the

television to allow adequate ventilation. This will

prevent overheating and possible damage to the

television. Dusty places should also be avoided.

Damage may occur if the television is left in direct

sunlight or near a heater. Avoid places subject to

extremely high temperatures or humidity. Place in a

location where the temperature remains between

5°C (41°F) min. and 35°C (94°F) max.

The mains supply required for this equipment is

220-240v AC 50/60Hz. Never connect to a DC

supply or any other power source. DO ensure that

the television is not standing on the mains lead.

DO NOT cut off the mains plug from this

equipment, this incorporates a special Radio

Interference Filter, the removal of which will impair

its performance.

IF IN DOUBT PLEASE CONSULT A COMPETENT

ELECTRICIAN.

DO read the operating instructions before you

attempt to use the equipment.

DO ensure that all electrical connections

(including the mains plug, extension leads and

inter-connections between pieces of equipment)

are properly made and in accordance with the

manufacturers’ instructions. Switch off and

withdraw the mains plug before making or

changing connections.

DO consult your dealer if you are ever in doubt

about the installation, operation or safety of your

equipment.

DO be careful with glass panels or doors on

equipment.

Air Circulation

Heat Damage

Mains Supply

Do

DO NOT obstruct the ventilation openings of the

equipment with items such as newspapers,

tablecloths, curtains, etc. Overheating will cause

damage and shorten the life of the equipment.

DO NOT allow electrical equipment to be exposed

to dripping or splashing or objects filled with liquids,

such as vases, to be placed on the equipment.

DO NOT place hot objects or naked flame sources,

such as lighted candles or nightlights on, or close to

equipment. High temperatures can melt plastic and

lead to fires.

DO NOT use makeshift stands and NEVER fix legs

with wood screws. To ensure complete safety,

always fit the manufacturers’ approved stand,

bracket or legs with the fixings provided according

to the instructions.

DO NOT leave equipment switched on when it is

unattended, unless it is specifically stated that it is

designed for unattended operation or has a

standby mode. Switch off by withdrawing the plug,

make sure your family know how to do this. Special

arrangements may need to be made for people

with disabilities.

DO NOT continue to operate the equipment if you

are in any doubt about it working normally, or it is

damaged in any way – switch off, withdraw the

mains plug and consult your dealer.

WARNING – excessive sound pressure from

earphones or headphones can cause hearing loss.

ABOVE ALL – NEVER let anyone, especially

children, push or hit the screen, push

anything into holes, slots or any other

openings in the case.

NEVER guess or take chances with electrical

equipment of any kind – it is better to be safe

than sorry.

Do not

DO NOT REMOVE ANY FIXED COVERS AS THIS

WILL EXPOSE DANGEROUS AND 'LIVE' PARTS.

THE MAINS PLUG IS USED AS A

DISCONNECTING DEVICE AND THEREFORE

SHOULD BE READILY OPERABLE.

gg

English

5

Installation and important information

Where to install

Locate the television away from direct sunlight and strong

lights, soft, indirect lighting is recommended for

comfortable viewing. Use curtains or blinds to prevent

direct sunlight falling on the screen.

Place on a sturdy platform, the mounting surface should

be flat and steady. It must be secured to the wall with a

sturdy tie using the clip on the back of the stand, or

secured to the platform using the fixing strap located

underneath the table top stand, this will prevent it

from falling over.

The LCD display panels are manufactured using an

extremely high level of precision technology, however

sometimes some parts of the screen may be missing

picture elements or have luminous spots. This is not a sign

of a malfunction.

Make sure the television is located in a position where it

cannot be pushed or hit by objects, as pressure will break

or damage the screen, and that small items cannot be

inserted into slots or openings in the case.

Please take note

EXCLUSION CLAUSE

Toshiba shall under no circumstances be liable for loss and/or damage to the product caused by:

i) fire;

ii) earthquake;

iii) accidental damage;

iv) intentional misuse of the product;

v) use of the product in improper conditions;

vi) loss and/or damage caused to the product whilst in the possession of a third party;

vii) any damage or loss caused as a result of the owner’s failure and/or neglect to follow the instructions set out in the owner’s

manual;

viii) any loss or damage caused directly as a result of misuse or malfunction of the product when used simultaneously with

associated equipment;

Furthermore, under no circumstances shall Toshiba be liable for any consequential loss and/or damage including but not limited

to the following, loss of profit, interruption of business, the loss of recorded data whether caused during normal operation or

misuse of the product.

NOTE: A Toshiba wall bracket or stand, where available, must be used. If a non Toshiba wall bracket or stand is used the

product’s BEAB approval will become void and the equipment is then used at the consumers own risk.

If stationary images generated by 4:3 broadcasts, text services, channel identification logos, computer displays, video games, on

screen menus, etc. are left on the television screen for any length of time they could become conspicuous, it is always advisable to

reduce both the brightness and contrast settings.

Side View

Top View

Sturdy tie

(as short as possible)

Clip

Top View

Sturdy tie

(as short as possible)

Clip

Stand style is

dependent on

model

gg

English

6

Simple at-a-glance reference of your remote control.

REGZA-LINK or DVD mode:

press

m

/

ll

r

to PAUSE/STEP

press

r

to PLAY

press

q

to REWIND

press

s

to FAST FORWARD

press

w

to EJECT

press

p

to STOP

press

l

q

to SKIP-REWIND

press

s

l

to SKIP-FORWARD

When in TV mode:

8

/

9

Time display

u Still picture

OI/II

Stereo/bilingual transmissions

SUBTITLE No function on this model

When in Text mode:

r

To reveal concealed text

q

To hold a wanted page

s

To enlarge text display size

8

/

9

To select a page whilst viewing a

normal picture

The remote control

UP

Remove the back cover to reveal the battery compartment and make sure the batteries are inserted the

right way round. Suitable battery types for this remote are AAA, IEC R03 1.5V.

Do not combine a used, old battery with a new one or mix battery types. Remove dead batteries

immediately to prevent acid from leaking into the battery compartment. Dispose of them in a designated

disposal area. Warning: batteries must not be exposed to excessive heat such as sunshine, fire or the like.

The performance of the remote control will deteriorate beyond a distance of five metres or outside an angle

of 30 degrees from the centre of the television. If the operating range becomes reduced the batteries may

need replacing.

Inserting batteries and effective range of the remote

To change programme positions and

text pages

To display on-screen information

To call up text services

To exit Menus

Selectable picture preferences

To select mode

To select input from external sources

To mute the sound

Widescreen viewing

On-screen Menus

To alter the volume

Active for Toshiba ancillary equipment

Text control buttons

Active for Toshiba ancillary equipment

Number buttons

To return to the previous programme

For On/Standby mode

When using menus the arrows move the

cursor on the screen up, down, left or

right. OK to confirm your selection

Active for Toshiba ancillary equipment

gg

English

7

Connecting external equipment

Before connecting any external equipment, turn off all main power switches. If there is no switch

remove the mains plug from the wall socket.

media recorder

decoder*

CABLE HOLDER

FIXING STRAP

HDMI™ INPUT

SOCKETS

SCART 2 (EXT2)

COMPONENT VIDEO (EXT3)

SCART 1 (EXT1)

*

a decoder could

be Digital Satellite

or any other

compatible decoder.



IN/OUT

MEDIA REC.

TV

SAT

NOTE: It is recommended that an HDMI cable with the

HDMI logo ( ) is used. When connecting other

equipment to this television if the connection is capable of

1080p a Category 2 cable will be required. Conventional

HDMI/DVI cable may not work properly with this mode. It is

recommended that DVI cable or DVI/HDMI adapter with

cable is less than 2m long.

NOTE: Although this television is able to connect to HDMI

equipment it is possible that some equipment may not

operate correctly.

A wide variety of external equipment can be

connected to the back of the television, therefore the

relevant owners manuals for all additional

equipment must be referred to.

We recommend SCART 1 for a decoder and SCART 2 for a

media recorder. If connecting S-VIDEO equipment, set the

INPUT for EXT2. See page 27.

If the television automatically switches over to monitor

external equipment, return to normal television by pressing

the desired programme position button. To recall external

equipment, press

B

to select between TV, EXT1, EXT2,

EXT3C, HDMI1, HDMI2 or PC.

HDMI, the HDMI logo, and High-Definition Multimedia Interface are

trademarks or registered trademarks of HDMI Licensing, LLC.

Aerial cables:

Connect the aerial to the socket on the rear of the television.

If you use a decoder* and/or a media recorder it is essential

that the aerial cable is connected through the decoder

and/or through the media recorder to the television.

SCART leads:

Connect the video recorder IN/OUT socket to the television.

Connect the decoder TV socket to the television. Connect

the media recorder SAT socket to the decoder MEDIA REC.

socket.

Before running Auto tuning put your decoder and media

recorder to Standby.

The phono sockets alongside the COMPONENT VIDEO

INPUT sockets will accept L and R audio signals.

In addition there is a fixed external audio ouput which

enables the connection of a suitable Hi-Fi unit.

HDMI™ (High-Definition Multimedia Interface) is for use with

a DVD, decoder or electrical equipment with digital audio

and video output.

REGZA-LINK will only work through HDMI when using other

Toshiba equipment with REGZA-LINK capability.

The cable holder

can be used for aerial,

media recorder and

audio cables. Do not

use as a handle and

remove all cables

before moving the

television.



gg

English

8

Connecting a computer

Before connecting any external equipment, turn off all main power switches. If there is no switch

remove the mains plug from the wall socket.

Connect the PC cable from the computer to the PC

terminal on the back of the television.

Connect the audio cable to the PC/HDMI1 Audio

socket on the back of the television. Select PC from the

PC/HDMI1 audio options in the AV connection

menu located in the SET UP menu.

Press the

B

to select PC mode.

PLEASE NOTE:

Some PC models cannot be connected to this

television.

An adaptor is not needed for computers with a DOS/V

compatible mini D-sub 15 pin terminal.

A band may appear at the edges of the screen or parts

of the picture may be obscured. This is due to scaling

of the picture by the set, it is not a malfunction.

When PC input mode is selected some of the

television’s features will be unavailable e.g. Manual

setting in the SET UP menu, Colour, Tint, DNR and

Black Stretch in the Picture settings menu.

The following signals can be displayed:

VGA: 640 x 480/60 Hz (VESA)

VGA: 640 x 480/75 Hz (VESA)

SVGA: 800 x 600/60 Hz (VESA)

SVGA: 800 x 600/75 Hz (VESA)

XGA: 1024 x 768/60 Hz (VESA)

XGA: 1024 x 768/70 Hz (VESA)

XGA: 1024 x 768/75 Hz (VESA)

WXGA: 1280 x 768/60 Hz (VESA)

WXGA: 1280 x 768/60 Hz (VESA) – Reduced Blanking

WXGA: 1280 x 768/75 Hz (VESA)

WXGA: 1360 x 768/60Hz (VESA)

SXGA: 1280 x 1024/60 Hz (VESA)

SXGA: 1280 x 1024/75 Hz (VESA)

IMPORTANT NOTE: Some PCs when connected

they may not display correctly.

When connecting a PC using HDMI the following

signals can be accepted (see page 17):

1080i 50/60Hz

1080p 50/60Hz

720p 50/60Hz

the back of your television

Computer

Audio cable for PC to

television connection

(not supplied)

Conversion adaptor if required (not supplied)

RGB PC cable

(not supplied)

Mini D-sub

15 pin connector

gg

English

9

Connecting REGZA-LINK

The basic functions of connected audio/video equipment can be controlled using the televisions remote

control if a REGZA-LINK compatible device is connected.

HDMI IN HDMI OUT

HDMI OUT

the back of your television

Playback equipment

AV amplifier

Playback equipment

NOTE: It is recommended that for correct operation all

audio/video devices are connected using HDMI cables

branded with the HDMI logo ( ). If several

devices are connected, the REGZA-LINK feature may

not operate properly.

After connecting the equipment use the REGZA-LINK

menus to setup the desired options. The connected

equipment must also be set. For details see the

operation manual for each connected device.

NOTE: The REGZA-LINK feature uses CEC Technology

as regulated by the HDMI standard. This feature is

limited to models incorporating Toshiba’s REGZA-LINK.

However, Toshiba is not liable for those operations.

Refer to individual instruction manuals for compatability

information.

gg

English

10

Controls and input connections

If the RED LED is unlit check that the mains plug is

connected to the power supply. If the picture does not

appear press

i

on the remote control, it may take a

few moments.

To put the television into Standby press

i

on the remote

control. To view the television press

i

again. The picture

may take a few seconds to appear.

To set up the television you will now need to use the

on-screen menus. Press the MENU button on the

remote control to see the menus.

The menu bar at the top of the screens will show five

different topics shown in symbols. As each symbol is

selected by pressing

z

or

x

on the navigation ring on

the remote control, its respective options will appear

below.

To use the options, press

e

on the navigation ring to

move down through them and OK,

z

or

x

to select the

required choice. Follow the on-screen instructions. The

functions of each menu are described in detail

throughout the manual.

A wide variety of external equipment can be connected to the input sockets on the side of the television.

Whilst all the necessary adjustments and controls for the television are made using the remote control, the

buttons on the television may be used for some functions.

To alter the volume press – j +.

To alter the programme position press

ee

F

ff

.

Press MENU and S, R, P or Q to control the sound

and picture options.

Press MENU to finish.

When connecting sound equipment to EXT3, connect

the audio output of the equipment to the phono sockets

on the television.

To select the Input, press

B

until the display shows

EXT3 as described on page 27. The television will

automatically sense the type of signal.

Please always refer to the owner’s manual of the

equipment to be connected for full details.

Please note: Inserting the headphone plug will mute the

sound from all speakers.

Switching on Using the controls and connections

Standby

GREEN LED – On timer

(LED 2)

RED LED – Standby

GREEN LED – Power on

(LED1)

INPUT 3

(EXT3)

Input 3

(side) will take

priority over

EXT3 (back) if

both connections

are used at the

same time.



gg

English

11

Manual tuning

Prog. Channel Station

1 C22 BBC1

2 C28 BBC2

3 C25 ITV

4 C32 CH4

5 C68

6 C69

Store

MENU

Back

EXIT

Watch TV

Tuning the television using Quick Setup,

sorting programme positions

Before switching on the television put your decoder and media recorder to Standby if they are connected.

To set up the television use the buttons on the remote control as detailed on page 6.

1

2

3

5

6

7

4

Connect the television to the mains power and

press the

i

button. The Quick Setup screen will

appear.

Using

z

or

x

select your language, then press

OK.

Then press

z

or

x

to select your country and

press OK.

To start Auto tuning press OK.

The search will begin for all available stations.

The slide bar will move along the line as the

search progresses.

You must allow the television to complete

the search.

When the search is complete the television will

automatically select programme position 1. This

may not be a clear picture or the signal may be

weak, so the station order can be changed using

Manual tuning which will appear on the screen.

Use

f

or

e

to move through the list to your

preferred position. As you do so the other stations

will move to make room.

Press

x

to store your move.

Repeat as necessary, then press EXIT.

If the television cannot be connected to a media

recorder/decoder with a SCART lead or if a

station on another system is required, use

Manual tuning to allocate a programme

position, see page 12.

With the list of stations now showing use

f

or

e

to highlight the station you want to move and

press

x

.

The selected station will be moved to the right of

the screen.

Quick Setup

Select your language.

Language English

EXIT

Watch TV

OK

Searching

Channel : C22 Station : BBC1

EXIT

Stop

Manual tuning

Prog. Channel Station

1 C22 BBC1

2 C28 BBC2

3 C25 ITV

4 C32 CH4

5 C68

6 C69

OK

Select Sort

MENU

Back

EXIT

Watch TV

gg

1/2

SET UP

Language English

Country UK

Auto tuning

OK

Manual tuning

OK

AV connection

OK

Picture position

OK

MENU

Back

EXIT

Watch TV

English

12

Manual tuning

Prog. Channel Station

0 C60

1 C22 BBC1

2 C28 BBC2

3 C25 ITV

4 C32 CH4

5 C69

OK

Select Sort

MENU

Back

EXIT

Watch TV

4

Press

x

to select System and use

f

or

e

to

change if required.

Then press

x

to select Search.

Press

f

or

e

to begin the search. The search

symbol will flash.

Manual tune

Press OK to select. If the programme is skipped,

Programme skip must be removed before

storing.

The television can be tuned-in manually using Manual tuning. For example: if the television cannot be

connected to a media recorder/decoder with a SCART lead or to tune-in a station on another System.

Programme: The number to be pressed on the remote control.

System: Specific to certain areas.

Colour system: Factory set to Auto, should only be changed if problems are experienced, i.e. NTSC input from

external source.

Programme skip: means nothing has been stored or the facility to skip the channel is ON. See page 13.

Channel: The channel number on which a station is being broadcast.

Search: Search up and down for a signal.

Manual fine tuning: Only used if interference/weak signal is experienced. See page 31.

Station: Station identification. Use the

f

or

e

and

z

or

x

buttons to enter up to seven characters.

Station

Programme System

Colour

system

Channel Search

Programme

skip

Manual fine

tuning

Use

f

or

e

to highlight the programme position

required e.g. we suggest Prog. 0 for

a media recorder.

Press MENU and using

z

or

x

select the SET UP

menu, with

e

highlight Manual tuning, press

OK to select.

To allocate a programme position on the television for a decoder and media recorder: turn the decoder on,

insert a pre-recorded film in the media recorder and press PLAY, then manually tune.

Use

z

and

x

to move across the screen and select any of these Manual Tune options.

1

2

3

Each signal will show on the television, if it is not

your media recorder, press

f

or

e

again to

restart the search.

7

5

6

Different

Channel

numbers

may be

displayed

Manual tuning

System

0 I A C 60 0

OK

Store

MENU

Back

EXIT

Watch TV

Manual tuning

Search: Up

0 I A C 60 0

OK

Store

MENU

Back

EXIT

Watch TV

gg

English

13

Manual tuning

Prog. Channel Station

1 C22 BBC1

2 C28 BBC2

3 C25 ITV

4 C32 CH4

5 C68

6 C69

OK

Select Sort

MENU

Back

EXIT

Watch TV

Manual tune continued,

Programme skip

Press MENU and repeat from Step 2 or press

EXIT.

Each programme position has to be individually

selected. To turn Programme skip off, repeat the

procedure for each position.

Skipped programme positions cannot be selected

by P P and P Q or by the controls on the

television, but can still be accessed by the number

buttons on the remote control.

3

4

5

Use

f

or

e

to highlight the programme position

to be skipped and press OK to select.

Press

x

to select Programme skip.

Use

f

or

e

to turn Programme skip on.

Press OK.

on the screen indicates a skipped

programme position.

To prevent certain programmes from being viewed, the

programme position can be skipped. The remote control

must be removed as the channels will still be available using

the number buttons

. Programmes can then be watched as

normal using the controls on the television, but the television

will not show the skipped programme position.

Programme skip

Select Manual tuning from the SET UP menu.

1

2

When your media recorder signal is found, press

x

to move along to Station. With

f

,

e

,

z

and

x

put in the required characters,

e.g. VCR.

This television has direct channel entry

if the channel numbers are known.

Select the Manual tuning screen in Step 3. Enter the

Programme number, the System, then the

Channel number. Press OK to store.

8

Press OK to store.

Repeat for each programme position you want

to tune or, press MENU to return to the list of

channels and select the next number to tune.

Press EXIT when you have finished.

To name external equipment, e.g. DVD on EXT2,

press

B

to select

B

2, then select Manual

setting from the SET UP menu.

Press

x

to select Label then using

f

,

e

,

z

and

x

put in the required characters.

10

11

12

13

9

P

LEASE N

OTE

Manual tuning

Station

0 I A C 60 0 V C R

OK

Store

MENU

Back

EXIT

Watch TV

Manual setting

Label

EXT2 A D V D

OK

Store

MENU

Back

EXIT

Watch TV

Manual tuning

Programme skip : On

1 I A C 22 0 B B C 1

OK

Store

MENU

Back

EXIT

Watch TV

gg

SOUND

Dual Dual 1

Bass 0

Treble 0

Balance 0

WOW

OK

Stable sound Off

MENU

Back

EXIT

Watch TV

1/2

SET UP

Language English

Country UK

Auto tuning

OK

Manual tuning

OK

AV connection

OK

Picture position

OK

MENU

Back

EXIT

Watch TV

English

14

You must allow the television to complete the search.

When the search is complete the television will

automatically select programme position 1. This may not

be a clear picture, so the station order can be changed

using Manual tuning, see page 11.

i

+

Auto tune, general controls, sound controls

Using Auto tuning

1

2

3

4

To set up the television using Auto tuning, press

MENU and use

z

or

x

to select the SET UP

menu.

Volume

Press

j

— or

j

+ to adjust the volume.

Sound Mute

Press

k

once to turn the sound off and again to cancel.

To select a programme position use the numbered

buttons on the remote control.

Programme positions can also be selected using P P and

P Q.

To revert to the previous programme position press

^^

.

To display on-screen information i.e. programme position,

input mode or stereo/mono signal, press . Press

again to cancel.

Selecting programme positions

Sound controls

Press MENU and

z

or

x

to select SOUND.

Press

e

to highlight Bass, Treble or Balance

and

z

or

x

to change the setting.

Bass, Treble and Balance

1

2

Press

e

to highlight Language and

z

or

x

to

select.

Using

e

highlight Country, then

z

or

x

to

select. The television will now tune the stations for

your country.

Press

e

to highlight Auto tuning, then press OK.

Auto tuning

Previous settings will be lost !

Press EXIT for no change.

Press OK to start Auto tune.

MENU

Back

EXIT

Watch TV

!

5

To start Auto tuning press OK.

gg

2/2

SOUND

Bass boost On

Bass boost level 70

MENU

Back

EXIT

Watch TV

English

15

Sound controls continued, SRS WOW™ sound

effects, dual, stable sound

®

SRS WOW

™

sound effects

SRS WOW™ is a suite of audio effects which use the

stereo signals being broadcast to produce enhanced sound

from the television’s speakers. If mono sound is broadcast

only TruBass will be available.

SRS 3D gives a rich sound experience, FOCUS

concentrates the sound and gives the effect of it coming

from the centre of the television, TruBass enhances the

lower bass frequencies.

Stable sound

®

The Stable Sound feature limits high volume levels on the

TV speakers, preventing the extreme changes in volume

that can occur when channels are changed or a

programme switches to a commercial.

1

2

Press MENU and select the SOUND menu.

Use

f

or

e

to highlight WOW then press OK.

3

4

5

Press

e

to highlight SRS 3D and using

z

or

x

select between On or Off.

Then press

e

to highlight FOCUS and press

z

or

x

to select between On or Off.

Highlight TruBass and use

z

or

x

to select Off,

Low or High to suit your preference.

NOTE: This feature is not available through

headphones.

1

Press MENU and select the SOUND menu.

Use

e

to highlight Stable sound then press

z

or

x

to select On or Off.

Dual

If a programme or film is being broadcast with a

soundtrack in more than one language, the DUAL feature

allows selection between them.

1

2

Press MENU and select the SOUND menu.

Use

e

to highlight Dual then press

z

or

x

to

choose between Dual 1 or Dual 2.

WOW, SRS and 

•

symbol are trademarks of SRS Labs, Inc.

WOW technology is incorporated under license from SRS Labs, Inc.



WOW

SRS 3D On

FOCUS Off

TruBass Off

MENU

Back

EXIT

Watch TV

Bass boost

In the SOUND menu press

e

to highlight Bass

boost. Use

z

or

x

to select On.

Then press

e

to highlight Bass boost level and

using

z

or

x

adjust to suit your preference.

1

2

Bass boost enhances the depth of the sound on the TV

speakers. The difference will only be noticeable on sound

with a strong bass.

2

When an active Super Woofer is connected to the Woofer

Out connection on the back of the television, select AV

connection in the SET UP menu, press

e

to highlight

Woofer and using

z

or

x

select External. (See 'Input

Selection and AV Connections' section).

gg

English

16

SUBTITLE

When subtitles are included on a

letterbox format broadcast, this setting

will raise the picture to ensure that all

the text is displayed.

SUBTITLE

Widescreen viewing

SUPER LIVE 1

This setting will enlarge a 4:3 image to

fit the screen by stretching the image

horizontally and vertically, holding

better proportions at the centre of the

image. Some distortion may occur.

Depending on the type of broadcast being transmitted, programmes can be viewed in a number of formats.

Press the

{

button repeatedly to select between Wide, Super Live 2, Cinema 2, 4:3, Super Live 1,

Cinema 1, Subtitle and 14:9.

SUPER LIVE 2

If a ‘side panel format’ signal is being

received this setting will enlarge the

image to fit the screen by stretching

the image horizontally and vertically,

holding better proportions at the

centre of the image. Some distortion

may occur.

CINEMA 1

When watching ‘letterbox format’

films/video tapes, this setting will

eliminate or reduce the black bars at

the top and bottom of the screen by

zooming in and selecting the image

without distortion.

CINEMA 2

When watching ‘all sides panel format’

films/video tapes, this setting will

eliminate or reduce the black bars at all

sides of the screen by zooming in and

selecting the image without distortion.

gg

English

17

Widescreen viewing

continued

Use this setting when watching a

widescreen DVD, widescreen video

tape or a 16:9 broadcast

(when available). Due to the range of

widescreen formats (16:9, 14:9,

20:9 etc.) black bars may be visible

on the top and bottom of the screen.

WIDE

When using a PC connected via

HDMI this setting will show the picture

without over scan, i.e. WYSIWYG.

PC

Use this setting to view a true 4:3

broadcast.

4:3

Using the special functions to change the size of the displayed image (i.e. changing the height/width ratio) for the purposes of public display or

commercial gain may infringe on copyright laws.

Press the

{

button and a list of all the widescreen formats will appear on screen.

Use

f

and

e

to highlight the required format and OK to select.

When a PC is connected via HDMI it will be selectable in the widescreen format list.

14:9

Use this setting when watching a 14:9

broadcast.

PC

Wide

Super Live 2

Cinema 2

4:3

Super Live 1

Cinema 1

Subtitle

14:9

gg

PICTURE

Picture settings

OK

3D Colour management

Off

Base colour adjustment

Active Backlight Control

On

Cinema mode

On

MENU

Back

EXIT

Watch TV

1/2

SET UP

Language English

Country UK

Auto tuning

OK

Manual tuning

OK

AV connection

OK

Picture position

OK

MENU

Back

EXIT

Watch TV

English

18

Picture controls

To return to the original factory settings select Reset

in the Picture position menu and press OK.

Picture position

The picture position may be adjusted to suit personal

preference and can be particularly useful for

external inputs.

In the SET UP menu press

e

until

Picture position is highlighted.

1

Press OK to view the options available for the

picture format that has been selected.

Press

f

and

e

to select an option, then

z

or

x

to adjust the settings.

The options alter depending on the widescreen

format chosen and when viewing connected

equipment.

In Cinema 2:

2

3

In the Picture settings menu press

e

to select

Backlight.

Press

z

or

x

to adjust.

2

3

In the PICTURE menu press

e

to select

Picture settings, then press OK.

1

Adjusting the Backlight can improve the clarity of the

screen when viewing.

Backlight

Picture position

Horizontal position 0

Vertical position 0

Reset

OK

MENU

Back

EXIT

Watch TV

Picture settings

Backlight 100

Contrast 100

Brightness 50

Colour 50

Tint 0

Sharpness 0

MENU

Back

EXIT

Watch TV

1/2

gg

English

19

Picture settings

Black stretch On

MPEG NR Low

DNR Auto.

Colour Temperature Cool

MENU

Back

EXIT

Watch TV

2/2

Picture controls continued

DNR enables you to ‘soften’ the screen representation of a

weak signal to reduce the noise effect.

DNR – Digital Noise Reduction

Select DNR from the Picture settings menu. Use

z

or

x

to adjust. The differences may not always

be noticeable (for the best result use lower

settings as picture quality can be lost if the setting

is too high).

1

When watching a DVD the compression may cause some

words or picture elements to become distorted or pixelated.

Using the MPEG NR feature reduces this effect by

smoothing out the edges.

MPEG NR – Noise Reduction

Select MPEG NR from the Picture settings

menu. Use

z

or

x

to select a setting to suit your

preference.

1

Black Stretch increases the strength of dark areas of the

picture which improves the definition.

Black stretch

Press

z

or

x

to select between On and Off. The

effect depends on the broadcast and is most

noticeable on dark colours.

1

2

Picture settings

Black stretch On

MPEG NR Low

DNR Auto.

Colour Temperature Cool

MENU

Back

EXIT

Watch TV

2/2

In the Picture settings menu press

e

until Black

Stretch is highlighted.

Black Stretch increases the strength of dark areas of the

picture which improves the definition.

Black stretch

Press

z

or

x

to select between On and Off. The

effect depends on the broadcast and is most

noticeable on dark colours.

1

2

Picture settings

Black stretch On

MPEG NR Low

DNR Auto.

Colour Temperature Cool

MENU

Back

EXIT

Watch TV

2/2

In the Picture settings menu press

e

until Black

Stretch is highlighted.

This television offers the choice of personalising the picture

style. Press

m

to view the different styles available:

Picture mode-1 to 3 are preset options and effect many

features/settings within the television, Picture mode-M

stores your own settings as detailed below:

Use

z

or

x

to adjust the Contrast, Brightness,

Colour, Tint and Sharpness.

Picture preferences

2

Select Picture settings from the PICTURE menu.

1

Picture settings

Backlight 100

Contrast 100

Brightness 50

Colour 50

Tint 0

Sharpness 0

MENU

Back

EXIT

Watch TV

1/2

In the Picture settings menu press

e

until

Colour Temperature is highlighted.

Press

z

or

x

to select between Cool, Normal

and Warm to suit your preference.

1

2

Colour Temperature increases the ‘warmth’ or ‘coolness’

of a picture by increasing the red or blue tint.

Colour temperature

gg

PICTURE

Picture settings

OK

3D Colour management

Off

Base colour adjustment

Active Backlight Control

On

Cinema mode

On

MENU

Back

EXIT

Watch TV

PICTURE

Picture settings

OK

3D Colour management

On

Base colour adjustment

OK

Active Backlight Control

On

Cinema mode

On

MENU

Back

EXIT

Watch TV

PICTURE

Picture settings

OK

3D Colour management

On

Base colour adjustment

OK

Active Backlight Control

On

Cinema mode

On

MENU

Back

EXIT

Watch TV

English

20

Base colour adjustment

Hue Saturation Brightness

Red +2 +6 +4

Green 0 0 0

Blue 0 0 0

Yellow 0 0 0

Magenta 0 0 0

Cyan 0 0 0

Reset

OK

MENU

Back

EXIT

Watch TV

If there are lines or jagged edges in the film or programme

being viewed, selecting Cinema mode can help correct

this by smoothing out the picture.

Cinema mode

In the PICTURE menu press

e

to select Cinema

mode.

Press

z

or

x

to select On or Off.

NOTE: When a DVD with subtitles is being played

this mode may not work correctly.

1

2

Picture controls continued

Press

z

or

x

to select an option, then

x

to

adjust the settings.

2

In the PICTURE menu press

e

to select

Base colour adjustment, then press OK.

1

The Base colour adjustment feature allows the

adjustment of individual colours to suit personal

preference. This can be useful when using an

external source.

Base colour adjustment

When 3D Colour management is selected it allows the

‘Base colour adjustment’ feature to become available.

3D Colour management

In the PICTURE menu press

e

to select

3D Colour management.

Press

z

or

x

to select On or Off.

1

2

To return to the original factory settings select

Reset and press OK.

When Active Backlight Control is activated it will

automatically optimise the backlighting levels for

dark scenes.

Active Backlight Control

In the PICTURE menu press

e

to select Active

Backlight Control.

Press

z

or

x

to select On or Off.

1

2

gg

La pagina si sta caricando...

Toshiba REGZA C300 Serie Manuale utente

Questo manuale è adatto anche per

Toshiba REGZA C300 Serie Manuale utente

in altre lingue

Documenti correlati

Altri documenti