Biostar NF520-A2G Manuale utente

NF560-A2G/NF520-A2G Setup Manual

FCC Information and Copyright

This equipment has been tested and found to comply with the limits of a Class

B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed

to provide reasonable protec tion against harmful interference in a residential

installation. This equipment generates, uses, and can radiate radio frequency

energy and, if not installed and used in accordance with the instructions, may

cause harmful interference to radio communications. There is no guarantee

that interference will not occur in a particular ins tallation.

The ve ndor makes no representations or warra nties with respec t to the

contents here and specially disclaims any implied warranties of merchantability

o r fi tnes s for a ny p u rp ose . F urt he r t he ve nd o r rese rves t he ri ght to rev ise th is

publication and to make changes to the contents here without obligation to

notify any party beforehand.

D uplication of this publicatio n, in part or in whole, is not allowed without first

obtaining the vendor’s approval in writing.

The content of this user’s manual is subject to be changed without notice and

we will not be res ponsible for any mistakes found in this user’s manual. All the

brand and product names are trademarks of their respective companies.

Table of Contents

Chapter 1: Introduction .............................................1

1.1 Before You Start...................................................................1

1.2 Package Checklist................................................................1

1.3 Motherboard Features..........................................................2

1.4 Rear Panel Connectors (for Ver 5.x).......................................4

1.5 Rear Panel Connectors (for Ver 6.x).......................................4

1.6 Motherboard Layout............................................................ 5

Chapter 2: Hardware Installation..............................6

2.1 Installing Central Processing Unit (CPU)................................6

2.2 FAN Headers........................................................................8

2.3 Installing System Memory......................................................9

2.4 Connectors and Slots............................................................11

Chapter 3: Headers & Jumpers Setup .....................13

3.1 How to Setup Jumpers..........................................................13

3.2 Detail Settings.....................................................................13

Chapter 4: NVIDIA RAID Functions.........................19

4.1 Operation System................................................................19

4.2 Raid Arrays.........................................................................19

4.3 How RAID Works.................................................................19

Chapter 5: Useful Help .............................................23

5.1 Driver Installation Note .......................................................23

5.2 Award BIOS Beep Code........................................................24

5.3 Extra Information................................................................24

5.4 Troubleshooting...................................................................25

Chapter 6: WarpSpeeder™ III .................................26

6.1 Introduction........................................................................26

6.2 System Requirement............................................................26

6.3 Installation.........................................................................27

6.4 WarpSpeeder™ III................................................................28

Appendencies: SPEC In Other Language ................34

German................................................................................................34

France..................................................................................................36

Italian..................................................................................................38

Spanish................................................................................................40

Portuguese...........................................................................................42

Polish...................................................................................................44

Russian................................................................................................46

Arabic..................................................................................................48

Japanese..............................................................................................50

NF560-A2G/NF520-A2G

1

CHAPTER 1: INTRODUCTION

1.1 BEFORE YOU START

Tha nk you for choosing our pro duct. Be fore you sta rt installing the

mothe rboa rd , please make sure you fo llow the instru ctions be low:

 Prepare a dry and stable working environment with

s ufficie nt lighting .

 Always disconnect the computer from power outlet

befo re ope ra tion.

 Befo re you take the mo the rboa rd ou t f rom a n ti-s ta tic

bag, ground yourself properly by touching any safely

grounded appliance, or use grounded wrist strap to

remove the static charge.

 Avo id tou ching the com pone nts o n mo the rboa rd o r the

rear side of the board unless necessary. Hold the board

on the edge, do not try to bend or flex the board.

 Do not lea ve any unfastened sma ll parts inside the

case after installation. Loose parts will cause short

circuits which may damage the equipment.

 Keep the computer from dangerous area, such as heat

source , humid a ir and water.

1.2 PACKAGE CHECKLIST

HDD Cable X 1

Se ria l ATA Cab le X 1

Rear I/O Panel for ATX Case X 1

Use r’s Manua l X 1

Fully Setup Driver CD X 1

FDD Cable X 1 (optional)

USB 2.0 Cable X1 (optional)

S/P DI F ou t Ca ble X 1 (optiona l)

Note: The package contents may differ by area or your motherboard version.

Motherboard Manual

2

1.3 MOTHERBOARD FEATURES

NF560-A2G NF520-A2G

CPU

Socket AM2

AMD Athlon 64 / Athlon 64 FX / Althlon 64 X2 /

Sempron processors

AMD 64 Arc hitecture enables 32 and 64 bit

computing

Supports Hyper Transport and Cool=n=Quiet

Socket AM2

AMD Athlon 64 / Athlon 64 FX / Althlon 64 X2 /

Sempron processors

AMD 64 Arc hitecture enables 32 and 64 bit

computing

Supports Hyper Transport and Cool=n=Quiet

FSB

Support HyperTransport

Supports up to 1GHz Bandwidth

Support HyperTransport

Supports up to 1GHz Bandwidth

Chipset nVIDIA nForce 560 nVIDIA nForce 520

Super I/O

ITE 8716F

Provides the most commonly used legacy Super

I/O functionality.

Low Pin Count Interface

Environment Control initiatives,

H/W Monitor

Fan Speed Controller

ITE's "Smart Guardian" function

ITE 8716F

Provides the most commonly used legacy Super

I/O functionality.

Low Pin Count Interface

Environment Control initiatives,

H/W Monitor

Fan Speed Controller

ITE's "Smart Guardian" function

Main

Memory

DDR2 DIMM Slot x 4

Eac h DIMM supports 256/512/1024/2048 MB

DDR2

Max Memory Capicity 8G

Dual Channel Mode DDR2 memory module

Supports DDR2 533/667/800

Registered DIMM and ECC DIMM is not

supported

DDR2 DIMM Slot x 4

Eac h DIMM supports 256/512/1024/2048 MB

DDR2

Max Memory Capicity 8G

Dual Channel Mode DDR2 memory module

Supports DDR2 533/667/800

Registered DIMM and ECC DIMM is not

supported

IDE

Integrated IDE Controller

Ultra DMA 33 / 66 / 100 / 133 Bus Master Mode

supports PIO Mode 0~4,

Integrated IDE Controller

Ultra DMA 33 / 66 / 100 / 133 Bus Master Mode

supports PIO Mode 0~4,

SA TA

Integrated Serial ATA Controller

Data transfer rates up to 3.0 Gb/s.

SATA Version 2.0 specification compliant.

Integrated Serial ATA Controller

Data transfer rates up to 3.0 Gb/s.

SATA Version 2.0 specification compliant.

LAN

Marvell 88E8056 / 88E8039 (optional)

10 / 100 Mb/s / 1Gb/s auto negotiation (Gigabit

bandwidth is for Marvell 88E8056 only)

Half / Full duplex capability

Marvell 88E8056 / 88E8039 (optional)

10 / 100 Mb/s / 1Gb/s auto negotiation (Gigabit

bandwidth is for Marvell 88E8056 only)

Half / Full duplex capability

NF560-A2G/NF520-A2G

3

NF560-A2G NF520-A2G

Sound

ALC888 (Ver 5.x) / ALC662 (Ver 6.x)

7.1 channels audio out (ALC888)

5.1 channels audio out (ALC662)

Supports HD Audio

ALC888 (Ver 5.x) / ALC662 (Ver 6.x)

7.1 channels audio out (ALC888)

5.1 channels audio out (ALC662)

Supports HD Audio

PCI slot x3 PCI slot x3

PCI Express x16 slot x1 PCI Express x16 slot x1 Slots

PCI Express x 1 slot x2 PCI Express x 1 slot x2

Floppy Connector x1 Floppy Connector x1

Printer Port Connector x1 Printer Port Connector x1

IDE Connector x1 IDE Connector x1

SA TA C onnector x4 SA TA Connect or x4

Front Panel Connector x1 Front Panel Connector x1

Front Audio Connector x1 Front Audio Connector x1

CD-in Connec tor x1 CD-in Connec tor x1

S/PDIF out Connector x1 S/PDIF out Connector x1

CPU Fan Header x1 CPU Fan Header x1

System Fan Header x1 System Fan Header x1

USB Connector x3 US B Connector x3

CMOS clear Header x1 CMOS clear Header x1

Power Connector (24pin) x1 Power Connector (24pin) x1

On Board

Connector

Power Connector (4pin) x1 Power Connector (4pin) x1

Back Panel

I/O

PS/2 Keyboard x1

PS/2 Mouse x1

S e ri a l Po rt x 1

LAN port x1

USB Port x4

Audio Jack (Ver 5.x) x6

Audio Jack (Ver 6.x) x3

PS/2 Keyboard x1

PS/2 Mouse x1

S e ri a l Po rt x 1

LAN port x1

USB Port x4

Audio Jack (Ver 5.x) x6

Audio Jack (Ver 6.x) x3

Board Size 200 mm (W) x 293 mm (L) 200 mm (W) x 293 mm (L)

Special

Feature

RAID 0 / 1 / 0+1 / 5 s upport RAID 0 / 1 / 0+1 support

OS Support

Windows 2000 / XP / VISTA

Biostar Reserves the right to add or remove

support for any OS with or without notice.

Windows 2000 / XP / VISTA

Biostar Reserves the right to add or remove

support for any OS with or without notice.

Motherboard Manual

4

1.4 REAR PANEL CONNECTORS (FOR VER 5.X)

PS/2

Mouse

PS/ 2

Keyboard

COM1 USBX2USBX2

LAN

Lin e In

Lin e Out

Mic In

Center

Rear

Side

1.5 REAR PANEL CONNECTORS (FOR VER 6.X)

PS /2

Mouse

PS/ 2

Keyboard

COM1 USBX2USBX2

LAN

L ine In /

Surround

Lin e O ut

Mic In 1/

B a ss/ C e nt er

NF560-A2G/NF520-A2G

5

1.6 MOTHERBOARD LAYOUT

JKBMS1

JUSB1

JUSBLAN1

PEX1_2

PEX16_1

PCI 2

FDD1

BAT1

JCOM1

Cod ec

PCI3

DIMMA1

DIMMB1

DIMMB2

DIMMA2

Socket A M2

Super I/O

PEX1_1

PCI1

LAN

JATXPWR 2

JCFAN1

JPRNT 1

JATXPWR 1

J USB2 JU SB3 JUSB4

JC MO S 1

JSFAN1 JPANEL1

JSPDIF_ OUT1

J CDIN1

SATA1 SATA2

IDE1

JAUDIO2

(for Ver 5.x)

JAUD IO1

(for Ver 6.x)

JAUD IOF1

nForce

5 20 / 560

SA TA 3 SA TA 4

BIOS

Not e: represents the 1■

st

pin.

Motherboard Manual

6

CHAPTER 2: HARDWARE INSTALLATION

2.1 INSTALLING CENTRAL PROCESSING UNIT (CPU)

Step 1: Remove the socket protection cap.

Step 2: Pull the lever toward direction A from the socket and then raise the

lever up to a 90-degree angle.

Step 3: Look for the white triangle on socket, and the gold triangle on

CPU should point forwards this white triangle. The CPU will fi t

only in the correct orientation.

NF560-A2G/NF520-A2G

7

Step 4: Hold the CPU down firmly, and then close the lever toward direct

B to complete the installation.

Step 5: Put the CPU Fan on the CPU and buckle it. Connect the CPU

FAN power cable to the JCFAN1. This completes the installation.

Motherboard Manual

8

2.2 FAN HEADERS

These fan headers support cooling-fans built in the computer. The fan

cable and connector may be different according to the fan manufacturer.

Connect the fan cable to the connector while matching the black wire to

pin#1.

JCFAN1: CPU Fan Header

Assignment

1 Ground

2 +12V

3 FAN RPM

rate sense

14

4

Smart Fan

Control

JSFAN1: System Fan Header

Assignment

1 Ground

2 +12V

13

3 FAN RPM rate

sense

Note:

The JCFAN1 su pp orts 4-pin he ad connec tor , and JSFAN1s up ports 3-pin head c onn ect or .

When connecting wit h wires o nto c on nect or s, please not e t hat t he r e d wire is the positive

and sho uld be c on nec ted to pin #2, an d t he blac k wire is Gr ound and should be

conn ecte d t o GND.

NF560-A2G/NF520-A2G

9

2.3 INSTALLING SYSTEM MEMORY

A. Memory Modules

DI MMA1

DI MMB1

DI MMB2

DI MMA2

1. Unlock a DIMM slot by pressing the retaining clips outward. Align a

DIMM on the slot such that the notch on the DIMM matches the

break on the Slot.

2. Insert the DIMM vertically and firmly into the slot until the retaining

chip snap back in place and the DIMM is properly seated.

Motherboard Manual

10

B. Memory Capacity

DIMM Socket

Location

DDR2 Module

To tal Memo r y

Size

DIMMA1 256MB/512MB/1024MB/2048MB

DIMMB1 256MB/512MB/1024MB/2048MB

DIMMA2 256MB/512MB/1024MB/2048MB

DIMMB2 256MB/512MB/1024MB/2048MB

Max is 8GB.

C. Dual Channel Memory installation

To trigger the Dual Channel function of the motherboard, the memory

module must meet the following requirements:

Install memory module of the same density in pairs, shown in the

following table.

Dual Channel Status

DIMMA1

DIMMB1 DIMMA2 DIMMB2

Enabled O O X X

Enabled X X O O

Enabled O O O O

(O means memory installed, X means memory not installed.)

The DRAM bus width of the memory module must be the same (x8 or

x16)

NF560-A2G/NF520-A2G

11

2.4 CONNECTORS AND SLOTS

FDD1: Floppy Disk Connector

The motherboard prov ides a standard floppy disk connector that supports 360K,

720K, 1.2M, 1.44M and 2.88M floppy disk ty pes. This connector supports the

prov ided f loppy drive ribbon cables.

1

2

33

34

IDE1: Hard Disk Connector

The motherboard has a 32-bit Enhanced PCI IDE Controller that prov ides PIO

Mode 0~4, Bus Master, and Ultra DMA 33/66/100/133 f unctionality.

The IDE connector can connect a master and a slave drive, so y ou can connect

up to two hard disk driv es.

21

3940

Motherboard Manual

12

PEX16_1: PCI-Express x16 Slot

- PCI-Express 1.0a compliant.

- Maximum theoretical realized bandwidth of 4GB/s simultaneously per

direction, f or an aggregate of 8GB/s totally.

PEX1_1/ PEX1_2: PCI-Express x1 Slots

- PCI-Express 1.0a compliant.

- Data transf er bandwidth up to 250MB/s per direction; 500MB/s in total.

- PCI-Express supports a raw bit-rate of 2.5Gb/s on the data pins.

- 2X bandwidth ov er the traditional PCI architecture.

PEX1_1

PEX1_2

PEX16_1

PCI1/PCI2/PCI3: Peripheral Component Interconnect Slots

This motherboard is equipped with 3 standard PCI slots. PCI stands f or

Peripheral Component Interconnect, and it is a bus standard for expansion

cards. This PCI slot is designated as 32 bits.

PCI1

PCI3

PCI2

NF560-A2G/NF520-A2G

13

CHAPTER 3: HEADERS & JUMPERS SETUP

3.1 HOW TO SET UP JUMPERS

The illustration shows how to set up jumpers. When the jumper cap is

placed on pins, the jumper is “close”, if not, that means the jumper is

“open”.

Pin opened Pin closed Pin1-2 closed

3.2 DETAIL SET T INGS

JPANEL1: Front Panel Header

This 16-pin connector i ncl udes Power-on, Reset, HDD LED, Power LED,

Sleep button, speaker Connection. It allows user to connect the PC case’s

front panel switch functions.

SLP

PWR_LED

On/Off

RS T

HLED

SPK

++

+

-

8

16

1

9

Pin Assignment Function Pin Assignment Function

1 +5V 9 Sleep control

2 N/A 10 Ground

Sleep button

3 N/A 11 N/A N/A

4 Speaker

Speaker

Connector

12 Power LED (+)

5 HDD LED (+) 13 Power LED (+)

6 HDD LED (-)

Hard drive

LED

14 Power LED (-)

Power LED

7 Ground 15 Power button

8 Reset control

Reset button

16 Ground

Power-on button

Motherboard Manual

14

ATX Power Source Connector: JATXPWR1

JATXPWR1 allows user to connect 24-pin power connector on the ATX power

supply.

1

12

13

24

Pin Assignment Pin Assignment

1 +3.3V 13 + 3.3V

2 +3.3V 14 - 12V

3 Gr oun d 15 Gr oun d

4 +5V 16 PS_ON

5 Gr oun d 17 Gr oun d

6 +5V 18 Gr oun d

7 Gr oun d 19 Gr oun d

8 PW_ OK 20 NC

9 Standby Volt ag e+5V 21 +5V

10 +12V 22 +5V

11 +12V 23 +5V

12 +3.3V 24 Gr oun d

JATXPWR2: ATX Power Source Conne ctor

By connecting this connector, it will provide +12V to CPU power circuit.

Assignment

1 +12V

2 +12V

3 Ground

1

2

43

4 Ground

NF560-A2G/NF520-A2G

15

JUSB2/JUSB3/JUSB4: Headers for USB 2.0 Ports at Front Panel

This header allows user to connect additional USB cable on the PC f ront panel,

and also can be connected with internal USB devices, like USB card reader.

Assignment

1 +5V (fused)

2 +5V (fused)

3 USB-

4 USB-

5 USB+

6 USB+

7 Ground

8 Ground

9 Key

1

2

9

10

JUSB2 JUSB3 JUSB4

10 NC

SATA1/SATA2/SATA3/SATA4: Serial ATA Connectors

The motherboard has a PCI to SATA Controller with 4 channels SATA interf ace,

it satisfies the SATA 2.0 spec and with transfer rate of 3.0Gb/s.

Assignment

1 Ground

2 TX+

3 TX-

4 Ground

5 RX-

6 RX+

1

4

7

SATA3 SATA4

SATA1 SATA2

7 Ground

Motherboard Manual

16

JAUDIOF1: Front Panel Audio Header

This header allows user to connect the front audio output cable with the PC f ront

panel. It will disable the output on back panel audio connectors.

Assignment

1 Mic Left in

2 Ground

3 Mic Right in

4 GPIO

5 Right line in

6 Jack Sense

7 Front Sense

8 Key

9 Left line in

12

910

10 Jack Sense

JCDIN1: CD-ROM Audio-in Connector

This connector allows user to connect the audio source f rom the v ariaty dev ices,

like CD-ROM, DVD-ROM, PCI sound card, PCI TV turner card etc.

Assignment

1 Left Channel

Input

2 Ground

3 Ground

14

4 Right Channel

Input

NF560-A2G/NF520-A2G

17

JSPDIF_OUT1: Digital Audio-out Connector

This connector allows user to connect the PCI bracket SPDIF output header.

Assignment

1 +5V

2 SPDIF_OUT

13

3 Ground

JCMOS1: Clear CMOS Header

By placing the jumper on pin2-3, it allows user to restore the BIOS saf e setting

and the CMOS data, please carefully f ollow the procedures to avoid damaging

the motherboard.

13

Pin 1-2 Close:

Normal Operation (default).

13

Pin 2-3 Close:

Clear CMOS data.

※ Clear CMOS Procedures:

1. Remov e AC power line.

2. Set the jumper to “Pin 2-3 close”.

3. Wait f or five seconds.

4. Set the jumper to “Pin 1-2 close”.

5. Power on the AC.

6. Reset y our desired password or clear the CMOS data.

Motherboard Manual

18

JPRNT1: Printer Port Connector

This header allows you to connector printer on the PC.

12

25

Pin Assignment Pin Assignment

1 -Strobe 14 Ground

2 -ALF 15 Data 6

3 Data 0 16 Ground

4 -Error 17 Data 7

5 Data 1 18 Ground

6 -Init 19 -ACK

7 Data 2 20 Ground

8 -Scltin 21 Busy

9 Data 3 22 Ground

10 Ground 23 PE

11 Data 4 24 Ground

12 Ground 25 SCLT

13 Data 5 26 Key

La pagina si sta caricando...

Biostar NF520-A2G Manuale utente

Questo manuale è adatto anche per

Biostar NF520-A2G Manuale utente

in altre lingue

Documenti correlati

Altri documenti