Biostar NF560-A2G Manuale utente

Categoria
Schede madri
Tipo
Manuale utente

Questo manuale è adatto anche per

NF560-A2G/NF520-A2G Setup Manual
FCC Information and Copyright
This equipment has been tested and found to comply with the limits of a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protec tion against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. There is no guarantee
that interference will not occur in a particular ins tallation.
The ve ndor makes no representations or warra nties with respec t to the
contents here and specially disclaims any implied warranties of merchantability
o r fi tnes s for a ny p u rp ose . F urt he r t he ve nd o r rese rves t he ri ght to rev ise th is
publication and to make changes to the contents here without obligation to
notify any party beforehand.
D uplication of this publicatio n, in part or in whole, is not allowed without first
obtaining the vendor’s approval in writing.
The content of this user’s manual is subject to be changed without notice and
we will not be res ponsible for any mistakes found in this user’s manual. All the
brand and product names are trademarks of their respective companies.
Table of Contents
Chapter 1: Introduction .............................................1
1.1 Before You Start...................................................................1
1.2 Package Checklist................................................................1
1.3 Motherboard Features..........................................................2
1.4 Rear Panel Connectors (for Ver 5.x).......................................4
1.5 Rear Panel Connectors (for Ver 6.x).......................................4
1.6 Motherboard Layout............................................................ 5
Chapter 2: Hardware Installation..............................6
2.1 Installing Central Processing Unit (CPU)................................6
2.2 FAN Headers........................................................................8
2.3 Installing System Memory......................................................9
2.4 Connectors and Slots............................................................11
Chapter 3: Headers & Jumpers Setup .....................13
3.1 How to Setup Jumpers..........................................................13
3.2 Detail Settings.....................................................................13
Chapter 4: NVIDIA RAID Functions.........................19
4.1 Operation System................................................................19
4.2 Raid Arrays.........................................................................19
4.3 How RAID Works.................................................................19
Chapter 5: Useful Help .............................................23
5.1 Driver Installation Note .......................................................23
5.2 Award BIOS Beep Code........................................................24
5.3 Extra Information................................................................24
5.4 Troubleshooting...................................................................25
Chapter 6: WarpSpeeder III .................................26
6.1 Introduction........................................................................26
6.2 System Requirement............................................................26
6.3 Installation.........................................................................27
6.4 WarpSpeeder™ III................................................................28
Appendencies: SPEC In Other Language ................34
German................................................................................................34
France..................................................................................................36
Italian..................................................................................................38
Spanish................................................................................................40
Portuguese...........................................................................................42
Polish...................................................................................................44
Russian................................................................................................46
Arabic..................................................................................................48
Japanese..............................................................................................50
NF560-A2G/NF520-A2G
1
CHAPTER 1: INTRODUCTION
1.1 BEFORE YOU START
Tha nk you for choosing our pro duct. Be fore you sta rt installing the
mothe rboa rd , please make sure you fo llow the instru ctions be low:
Prepare a dry and stable working environment with
s ufficie nt lighting .
Always disconnect the computer from power outlet
befo re ope ra tion.
Befo re you take the mo the rboa rd ou t f rom a n ti-s ta tic
bag, ground yourself properly by touching any safely
grounded appliance, or use grounded wrist strap to
remove the static charge.
Avo id tou ching the com pone nts o n mo the rboa rd o r the
rear side of the board unless necessary. Hold the board
on the edge, do not try to bend or flex the board.
Do not lea ve any unfastened sma ll parts inside the
case after installation. Loose parts will cause short
circuits which may damage the equipment.
Keep the computer from dangerous area, such as heat
source , humid a ir and water.
1.2 PACKAGE CHECKLIST
HDD Cable X 1
Se ria l ATA Cab le X 1
Rear I/O Panel for ATX Case X 1
Use r’s Manua l X 1
Fully Setup Driver CD X 1
FDD Cable X 1 (optional)
USB 2.0 Cable X1 (optional)
S/P DI F ou t Ca ble X 1 (optiona l)
Note: The package contents may differ by area or your motherboard version.
Motherboard Manual
2
1.3 MOTHERBOARD FEATURES
NF560-A2G NF520-A2G
CPU
Socket AM2
AMD Athlon 64 / Athlon 64 FX / Althlon 64 X2 /
Sempron processors
AMD 64 Arc hitecture enables 32 and 64 bit
computing
Supports Hyper Transport and Cool=n=Quiet
Socket AM2
AMD Athlon 64 / Athlon 64 FX / Althlon 64 X2 /
Sempron processors
AMD 64 Arc hitecture enables 32 and 64 bit
computing
Supports Hyper Transport and Cool=n=Quiet
FSB
Support HyperTransport
Supports up to 1GHz Bandwidth
Support HyperTransport
Supports up to 1GHz Bandwidth
Chipset nVIDIA nForce 560 nVIDIA nForce 520
Super I/O
ITE 8716F
Provides the most commonly used legacy Super
I/O functionality.
Low Pin Count Interface
Environment Control initiatives,
H/W Monitor
Fan Speed Controller
ITE's "Smart Guardian" function
ITE 8716F
Provides the most commonly used legacy Super
I/O functionality.
Low Pin Count Interface
Environment Control initiatives,
H/W Monitor
Fan Speed Controller
ITE's "Smart Guardian" function
Main
Memory
DDR2 DIMM Slot x 4
Eac h DIMM supports 256/512/1024/2048 MB
DDR2
Max Memory Capicity 8G
Dual Channel Mode DDR2 memory module
Supports DDR2 533/667/800
Registered DIMM and ECC DIMM is not
supported
DDR2 DIMM Slot x 4
Eac h DIMM supports 256/512/1024/2048 MB
DDR2
Max Memory Capicity 8G
Dual Channel Mode DDR2 memory module
Supports DDR2 533/667/800
Registered DIMM and ECC DIMM is not
supported
IDE
Integrated IDE Controller
Ultra DMA 33 / 66 / 100 / 133 Bus Master Mode
supports PIO Mode 0~4,
Integrated IDE Controller
Ultra DMA 33 / 66 / 100 / 133 Bus Master Mode
supports PIO Mode 0~4,
SA TA
Integrated Serial ATA Controller
Data transfer rates up to 3.0 Gb/s.
SATA Version 2.0 specification compliant.
Integrated Serial ATA Controller
Data transfer rates up to 3.0 Gb/s.
SATA Version 2.0 specification compliant.
LAN
Marvell 88E8056 / 88E8039 (optional)
10 / 100 Mb/s / 1Gb/s auto negotiation (Gigabit
bandwidth is for Marvell 88E8056 only)
Half / Full duplex capability
Marvell 88E8056 / 88E8039 (optional)
10 / 100 Mb/s / 1Gb/s auto negotiation (Gigabit
bandwidth is for Marvell 88E8056 only)
Half / Full duplex capability
NF560-A2G/NF520-A2G
3
NF560-A2G NF520-A2G
Sound
ALC888 (Ver 5.x) / ALC662 (Ver 6.x)
7.1 channels audio out (ALC888)
5.1 channels audio out (ALC662)
Supports HD Audio
ALC888 (Ver 5.x) / ALC662 (Ver 6.x)
7.1 channels audio out (ALC888)
5.1 channels audio out (ALC662)
Supports HD Audio
PCI slot x3 PCI slot x3
PCI Express x16 slot x1 PCI Express x16 slot x1 Slots
PCI Express x 1 slot x2 PCI Express x 1 slot x2
Floppy Connector x1 Floppy Connector x1
Printer Port Connector x1 Printer Port Connector x1
IDE Connector x1 IDE Connector x1
SA TA C onnector x4 SA TA Connect or x4
Front Panel Connector x1 Front Panel Connector x1
Front Audio Connector x1 Front Audio Connector x1
CD-in Connec tor x1 CD-in Connec tor x1
S/PDIF out Connector x1 S/PDIF out Connector x1
CPU Fan Header x1 CPU Fan Header x1
System Fan Header x1 System Fan Header x1
USB Connector x3 US B Connector x3
CMOS clear Header x1 CMOS clear Header x1
Power Connector (24pin) x1 Power Connector (24pin) x1
On Board
Connector
Power Connector (4pin) x1 Power Connector (4pin) x1
Back Panel
I/O
PS/2 Keyboard x1
PS/2 Mouse x1
S e ri a l Po rt x 1
LAN port x1
USB Port x4
Audio Jack (Ver 5.x) x6
Audio Jack (Ver 6.x) x3
PS/2 Keyboard x1
PS/2 Mouse x1
S e ri a l Po rt x 1
LAN port x1
USB Port x4
Audio Jack (Ver 5.x) x6
Audio Jack (Ver 6.x) x3
Board Size 200 mm (W) x 293 mm (L) 200 mm (W) x 293 mm (L)
Special
Feature
RAID 0 / 1 / 0+1 / 5 s upport RAID 0 / 1 / 0+1 support
OS Support
Windows 2000 / XP / VISTA
Biostar Reserves the right to add or remove
support for any OS with or without notice.
Windows 2000 / XP / VISTA
Biostar Reserves the right to add or remove
support for any OS with or without notice.
Motherboard Manual
4
1.4 REAR PANEL CONNECTORS (FOR VER 5.X)
PS/2
Mouse
PS/ 2
Keyboard
COM1 USBX2USBX2
LAN
Lin e In
Lin e Out
Mic In
Center
Rear
Side
1.5 REAR PANEL CONNECTORS (FOR VER 6.X)
PS /2
Mouse
PS/ 2
Keyboard
COM1 USBX2USBX2
LAN
L ine In /
Surround
Lin e O ut
Mic In 1/
B a ss/ C e nt er
NF560-A2G/NF520-A2G
5
1.6 MOTHERBOARD LAYOUT
JKBMS1
JUSB1
JUSBLAN1
PEX1_2
PEX16_1
PCI 2
FDD1
BAT1
JCOM1
Cod ec
PCI3
DIMMA1
DIMMB1
DIMMB2
DIMMA2
Socket A M2
Super I/O
PEX1_1
PCI1
LAN
JATXPWR 2
JCFAN1
JPRNT 1
JATXPWR 1
J USB2 JU SB3 JUSB4
JC MO S 1
JSFAN1 JPANEL1
JSPDIF_ OUT1
J CDIN1
SATA1 SATA2
IDE1
JAUDIO2
(for Ver 5.x)
JAUD IO1
(for Ver 6.x)
JAUD IOF1
nForce
5 20 / 560
SA TA 3 SA TA 4
BIOS
Not e: represents the 1
st
pin.
Motherboard Manual
6
CHAPTER 2: HARDWARE INSTALLATION
2.1 INSTALLING CENTRAL PROCESSING UNIT (CPU)
Step 1: Remove the socket protection cap.
Step 2: Pull the lever toward direction A from the socket and then raise the
lever up to a 90-degree angle.
Step 3: Look for the white triangle on socket, and the gold triangle on
CPU should point forwards this white triangle. The CPU will fi t
only in the correct orientation.
NF560-A2G/NF520-A2G
7
Step 4: Hold the CPU down firmly, and then close the lever toward direct
B to complete the installation.
Step 5: Put the CPU Fan on the CPU and buckle it. Connect the CPU
FAN power cable to the JCFAN1. This completes the installation.
Motherboard Manual
8
2.2 FAN HEADERS
These fan headers support cooling-fans built in the computer. The fan
cable and connector may be different according to the fan manufacturer.
Connect the fan cable to the connector while matching the black wire to
pin#1.
JCFAN1: CPU Fan Header
Pin
Assignment
1 Ground
2 +12V
3 FAN RPM
rate sense
14
4
Smart Fan
Control
JSFAN1: System Fan Header
Pin
Assignment
1 Ground
2 +12V
13
3 FAN RPM rate
sense
Note:
The JCFAN1 su pp orts 4-pin he ad connec tor , and JSFAN1s up ports 3-pin head c onn ect or .
When connecting wit h wires o nto c on nect or s, please not e t hat t he r e d wire is the positive
and sho uld be c on nec ted to pin #2, an d t he blac k wire is Gr ound and should be
conn ecte d t o GND.
NF560-A2G/NF520-A2G
9
2.3 INSTALLING SYSTEM MEMORY
A. Memory Modules
DI MMA1
DI MMB1
DI MMB2
DI MMA2
1. Unlock a DIMM slot by pressing the retaining clips outward. Align a
DIMM on the slot such that the notch on the DIMM matches the
break on the Slot.
2. Insert the DIMM vertically and firmly into the slot until the retaining
chip snap back in place and the DIMM is properly seated.
Motherboard Manual
10
B. Memory Capacity
DIMM Socket
Location
DDR2 Module
To tal Memo r y
Size
DIMMA1 256MB/512MB/1024MB/2048MB
DIMMB1 256MB/512MB/1024MB/2048MB
DIMMA2 256MB/512MB/1024MB/2048MB
DIMMB2 256MB/512MB/1024MB/2048MB
Max is 8GB.
C. Dual Channel Memory installation
To trigger the Dual Channel function of the motherboard, the memory
module must meet the following requirements:
Install memory module of the same density in pairs, shown in the
following table.
Dual Channel Status
DIMMA1
DIMMB1 DIMMA2 DIMMB2
Enabled O O X X
Enabled X X O O
Enabled O O O O
(O means memory installed, X means memory not installed.)
The DRAM bus width of the memory module must be the same (x8 or
x16)
NF560-A2G/NF520-A2G
11
2.4 CONNECTORS AND SLOTS
FDD1: Floppy Disk Connector
The motherboard prov ides a standard floppy disk connector that supports 360K,
720K, 1.2M, 1.44M and 2.88M floppy disk ty pes. This connector supports the
prov ided f loppy drive ribbon cables.
1
2
33
34
IDE1: Hard Disk Connector
The motherboard has a 32-bit Enhanced PCI IDE Controller that prov ides PIO
Mode 0~4, Bus Master, and Ultra DMA 33/66/100/133 f unctionality.
The IDE connector can connect a master and a slave drive, so y ou can connect
up to two hard disk driv es.
21
3940
Motherboard Manual
12
PEX16_1: PCI-Express x16 Slot
- PCI-Express 1.0a compliant.
- Maximum theoretical realized bandwidth of 4GB/s simultaneously per
direction, f or an aggregate of 8GB/s totally.
PEX1_1/ PEX1_2: PCI-Express x1 Slots
- PCI-Express 1.0a compliant.
- Data transf er bandwidth up to 250MB/s per direction; 500MB/s in total.
- PCI-Express supports a raw bit-rate of 2.5Gb/s on the data pins.
- 2X bandwidth ov er the traditional PCI architecture.
PEX1_1
PEX1_2
PEX16_1
PCI1/PCI2/PCI3: Peripheral Component Interconnect Slots
This motherboard is equipped with 3 standard PCI slots. PCI stands f or
Peripheral Component Interconnect, and it is a bus standard for expansion
cards. This PCI slot is designated as 32 bits.
PCI1
PCI3
PCI2
NF560-A2G/NF520-A2G
13
CHAPTER 3: HEADERS & JUMPERS SETUP
3.1 HOW TO SET UP JUMPERS
The illustration shows how to set up jumpers. When the jumper cap is
placed on pins, the jumper isclose”, if not, that means the jumper is
open”.
Pin opened Pin closed Pin1-2 closed
3.2 DETAIL SET T INGS
JPANEL1: Front Panel Header
This 16-pin connector i ncl udes Power-on, Reset, HDD LED, Power LED,
Sleep button, speaker Connection. It allows user to connect the PC case’s
front panel switch functions.
SLP
PWR_LED
On/Off
RS T
HLED
SPK
++
+
-
-
8
16
1
9
Pin Assignment Function Pin Assignment Function
1 +5V 9 Sleep control
2 N/A 10 Ground
Sleep button
3 N/A 11 N/A N/A
4 Speaker
Speaker
Connector
12 Power LED (+)
5 HDD LED (+) 13 Power LED (+)
6 HDD LED (-)
Hard drive
LED
14 Power LED (-)
Power LED
7 Ground 15 Power button
8 Reset control
Reset button
16 Ground
Power-on button
Motherboard Manual
14
ATX Power Source Connector: JATXPWR1
JATXPWR1 allows user to connect 24-pin power connector on the ATX power
supply.
1
12
13
24
Pin Assignment Pin Assignment
1 +3.3V 13 + 3.3V
2 +3.3V 14 - 12V
3 Gr oun d 15 Gr oun d
4 +5V 16 PS_ON
5 Gr oun d 17 Gr oun d
6 +5V 18 Gr oun d
7 Gr oun d 19 Gr oun d
8 PW_ OK 20 NC
9 Standby Volt ag e+5V 21 +5V
10 +12V 22 +5V
11 +12V 23 +5V
12 +3.3V 24 Gr oun d
JATXPWR2: ATX Power Source Conne ctor
By connecting this connector, it will provide +12V to CPU power circuit.
Pin
Assignment
1 +12V
2 +12V
3 Ground
1
2
43
4 Ground
NF560-A2G/NF520-A2G
15
JUSB2/JUSB3/JUSB4: Headers for USB 2.0 Ports at Front Panel
This header allows user to connect additional USB cable on the PC f ront panel,
and also can be connected with internal USB devices, like USB card reader.
Pin
Assignment
1 +5V (fused)
2 +5V (fused)
3 USB-
4 USB-
5 USB+
6 USB+
7 Ground
8 Ground
9 Key
1
2
9
10
JUSB2 JUSB3 JUSB4
10 NC
SATA1/SATA2/SATA3/SATA4: Serial ATA Connectors
The motherboard has a PCI to SATA Controller with 4 channels SATA interf ace,
it satisfies the SATA 2.0 spec and with transfer rate of 3.0Gb/s.
Pin
Assignment
1 Ground
2 TX+
3 TX-
4 Ground
5 RX-
6 RX+
1
4
7
SATA3 SATA4
SATA1 SATA2
7 Ground
Motherboard Manual
16
JAUDIOF1: Front Panel Audio Header
This header allows user to connect the front audio output cable with the PC f ront
panel. It will disable the output on back panel audio connectors.
Pin
Assignment
1 Mic Left in
2 Ground
3 Mic Right in
4 GPIO
5 Right line in
6 Jack Sense
7 Front Sense
8 Key
9 Left line in
12
910
10 Jack Sense
JCDIN1: CD-ROM Audio-in Connector
This connector allows user to connect the audio source f rom the v ariaty dev ices,
like CD-ROM, DVD-ROM, PCI sound card, PCI TV turner card etc.
Pin
Assignment
1 Left Channel
Input
2 Ground
3 Ground
14
4 Right Channel
Input
NF560-A2G/NF520-A2G
17
JSPDIF_OUT1: Digital Audio-out Connector
This connector allows user to connect the PCI bracket SPDIF output header.
Pin
Assignment
1 +5V
2 SPDIF_OUT
13
3 Ground
JCMOS1: Clear CMOS Header
By placing the jumper on pin2-3, it allows user to restore the BIOS saf e setting
and the CMOS data, please carefully f ollow the procedures to avoid damaging
the motherboard.
13
Pin 1-2 Close:
Normal Operation (default).
13
13
Pin 2-3 Close:
Clear CMOS data.
Clear CMOS Procedures:
1. Remov e AC power line.
2. Set the jumper toPin 2-3 close.
3. Wait f or five seconds.
4. Set the jumper toPin 1-2 close.
5. Power on the AC.
6. Reset y our desired password or clear the CMOS data.
Motherboard Manual
18
JPRNT1: Printer Port Connector
This header allows you to connector printer on the PC.
12
25
Pin Assignment Pin Assignment
1 -Strobe 14 Ground
2 -ALF 15 Data 6
3 Data 0 16 Ground
4 -Error 17 Data 7
5 Data 1 18 Ground
6 -Init 19 -ACK
7 Data 2 20 Ground
8 -Scltin 21 Busy
9 Data 3 22 Ground
10 Ground 23 PE
11 Data 4 24 Ground
12 Ground 25 SCLT
13 Data 5 26 Key
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91

Biostar NF560-A2G Manuale utente

Categoria
Schede madri
Tipo
Manuale utente
Questo manuale è adatto anche per

in altre lingue