ABD Lighting 18X18W RGBWAP 6IN1 Manuale utente

Marca
ABD Lighting
Modello
18X18W RGBWAP 6IN1
Categoria
Stroboscopi
Tipo
Manuale utente
ABD Lighting Equipment Co.,LTD Website: www.abdlighting.com
LED waterproof zoom par light
18X18W RGBWAP 6IN1
USERMANUAL
Ver1.0
ABD Lighting Equipment Co.,LTD Website: www.abdlighting.com
Table of contents
1. Before you work
·······································
2
1.2 Un pa cki ng in st ru cti on s ························· ············2
1.3 AC Powe r ······································································2
1.4 Safety instructions··········································· ············3
2. Introduction··············································· 3
2.1 Features···········································································3
2.2 DMX chan ne l ················································ ············3
3. Setup························································ 4
3.1 Fi xt ure link in g···························································4
3.2 Setting up a DMX signal connect.·····························6
3.3 Setup····································································· ············6
4. Operating instructions································ 6
4.1 Menu configure································································6
4.2 Me nu funct ion map ················································7
4.3 Use r con fi gu rat io ns ··············································8
4.4 DMX chan ne l val ues ································· ········· 9
5. Technical specifications······················ ···· 10
9
0-2
3-127
128-191
192-255
Built in program
No function
Perform built in program with increase speed
No function
No function
10
0-255
Zoom
From small to big
6 DMX cha nn el s
Channel
Value
Function
1
0-255
Red
0-100%
2
0-255
Green
0-100%
3
0-255
Blue
0-100%
4
0-255
White
0-100%
5
0-255
Amber
0-100%
6
0-255
Purple
0-100%
7
0-255
Zoom
From small to big
5. Specification
Voltage
Control
Max temperature
Data input/output
Lamp resource
Outside size
N.W
1
10
ABD Lighting Equipment Co.,LTD Website: www.abdlighting.com
Warning! Confirm the voltage to select switch which can be
matched the circuit with the light. If it is different from the
supply power of the light, it will damage the light! All the lights
must be connected the earth, not all the lights have the switch to
be selected.
Please connect the correct voltage!
Master: Set any one of lights to auto、sound or strobe control
mode
Slave: Set them to DMX mode and their address code to1.
Notes： Each Master-slave group can be one and only light in
master,ensure lights under this group without connection with
any DMX controller.
To set DMX mod e
The light can connect to the DMX controller to receive its signal
indication, which control by DMX controller. DMX value is
referenced by “4. 4 DMX ch an ne l val ue s” .
4.4 DM X cha nn el valu es
9 DM X chan nel s
Channel
Value
Function
1
0-255
Dimmer
0-100%
2
0-255
Red
0-100%
3
0-255
Green
0-100%
4
0-255
Blue
0-100%
5
0-255
White
0-100%
6
0-255
Amber
0-100%
7
0-255
Purple
0-100%
8
0-2
3-127
128-255
Strobe
No function
Strobe with increase speed
Random Strobe with increase speed
1. Before you work
1.1 Packing list
1.2 Un packi ng in st ru cti on s
When you get this product, please take it from carton carefully
to make sure whether all the accessories are in and damaged
or not.When you find that there are any parts or wrong sign with
the carton, or non-operation, please inform us and to keep the
carton and shipping bill completely.
1.3 AC Powe r
Please check the manual before you operate the light. The
rating current of the light listed which shows the average
current-consume under the normal circumstances.
All the lights must be offered shoot-through circuit, it could not
be connected dimmer circuit, although the dimmer channels are
completely for 1-100% switch.
Before the light’s working, please confirm the correct voltage.
Product name
quantity
LED Par Light
1 pcs
User manual
1 base
9
2
ABD Lighting Equipment Co.,LTD Website: www.abdlighting.com
Please read these instructions carefully, it includes important
information about the light’s installation, usage and
maintenance of this product.
1.4 Safety instructions
Please confirm the same voltage to the light.
Please confirm there is no flammable material around the light.
The light must be set up the ventilating place. The distance is
≥51cm around approach material. To check the air passage is
ok at any time.
The Maximum temperature is ≤40℃(104℉).
When the lights has problems, please stop to use to contact the
supplier. Don’t repair it by yourself!
Don’t connect by a dimmer.
To confirm the power wire is straight and non-damaged. Don’t
pull it directly.
Don’t look at the bulb when the light is working to avoid any
hurt.
2. Introduction
2.1 Features
18x15W RGBWAP 6 in 1 LED
Zoom function from 19-50 degree
Waterproof IP65
10 or 7 DMX channels.
Variable electronic dimmer(0-100%).
Strobe:0-16Hz
Control mode:Auto , Menu , DMX mode
2.2 DM X cha nn el
|
LCXX(To adjust amber brightness separately)
|
LPXX(To adjust Purple brightness separately)
CHAS(built in program)
|
C001(fast perform model)
|
C002(slow perform model )
CHSE(channel setting )
|
CH10(DMX512 CH 10)
|
CH07(DMS512 CH 7)
FACT(Restore factory settings)
|
FA00-01 FA01 restore factory setting after
pressing“ENTER” (factory setting is DMX mode)
Note:* “Add”, of “ . ” Which should show as flicker ,non-flicker
means no signal or wrong signal.
***Shade: Red from bright to be off, then, green from bright to be off,
then, blue from bright to be off, then, Red from bright to be off…
****Change: Red bright, red be off, green bright, green be off, blue
bright, blue be off, red bright…
XX” Value：“01-10”.
4. 3 Us er conf ig ur ati on s
Set-up 1pcs light`s menu mode (Auto-running)
.Press the MENU, such as the picture 4.2 shows the menu
function
.Use the UP/DOWN buttons to choose the right one to confirm.
To set Master-slave mode
.Press the MENU, same as picture 4.2 shows the menu
function
3
8
ABD Lighting Equipment Co.,LTD Website: www.abdlighting.com
Note: Please choose ”ENTER” return to the main menu to
save the address code or mode after you set up. When the
light is lighting, the display of the address code or mode is
same as the last time when you operated.
4.2 Me nu fu nct io n ma p
(Main menu)
|
(1
st
class option)
|
(2
rd
class option)
Add（Address code setting)*
|
A.001
|
……
|
A.512
FLAS (Strobe setting)
|
F0XX
**
(the total speed of strobe to be adjusted)
|
FrXX(To adjust red brightness separately)
|
FgXX(To adjust green brightness separately)
|
FbXX(To adjust blue brightness separately)
|
FAXX(To adjust white brightness separately)
|
FCXX(To adjust Amber brightness separately)
|
FPXX(To adjust purpler brightness separately)
Lrgb(Adjust separately Led brightness）
|
LrXX(To adjust red brightness separately)
|
LgXX(To adjust green brightness separately)
|
LbXX(To adjust blue brightness separately)
|
LAXX(To adjust white brightness separately)
10 DMX channels
Channel
Function
1
Dimmer
2
Red
3
Green
4
Blue
5
White
6
Amber
7
Purple
8
Strobe
9
Built in program
10
Zoom
7DMX channels
Channel
Function
1
Red
2
Green
3
Blue
4
White
5
Amber
6
purple
7
Zoom
Note: *When the channel is opening, please confirm
the channel 1
st
is phase-in.
3. Setup
3.1 Fi xture link in g
When you control the light’s master/slave or DMX 512 signal
agreement, the lights can be connected by signal wire which
the distance is ≤500m,The maximum connect lights are 32pcs
more or less, and adapt DMX light pair to segregate the signal
7
4
ABD Lighting Equipment Co.,LTD Website: www.abdlighting.com
zoom equipment, in order to protect the light’s
signal won’t be interrupted by other signal.
Moreover, it won’t affect by the signal wire’s length
Data connec t
Data cable is connected by DMX data wire, and XLR. Please
use hi-quality data cable signal wire, it won’t be interrupted by
magnetic.
Charac te risti cs of DMX dat a cab l e
2 conductors’ double tree lace and shield.
The maximum capacitance of the conductors-30 pF/ft.
The maximum capacitance of the conductor and shield -55
pF/ft.
The maximum resistance is 20 ohms/1000ft.
The nominal impedance 100-140 ohms.
DMX opt coupler segregate signal zoom equipment’s 3 pin(5
pin) XLR plug.
Cable wire’s adapter:
The two sides of signal cable wire is consisted of 1 pair female
and male 3 XLR plug, which is correspond the lights or DMX
controller,
3-Pi n to 5-Pin con ve rsi on ch ar t
Note! If you use a controller with a 5 pin DMX output connector.
you will need to use a 5pin to 3 pin adapter
CHAUVET Model No:DMX5M. or DMX 5F
The chart below details a proper cable conversion:
3.2 Setting up a DMX signal connect
As following pictures show, please connect the first light to the
signal cable which is with XLR by DMX controller, then, connect
light in series.
3.3 Se tu p
The light must be set up the ventilating place. To confirm there
is nothing to hinder the heat dissipation place. When the light is
hanged, please choose a safety wire.
4. Operating instructions
4.1 Menu configure
There are 4 buttons located in the bottom of the LED digital
display when you check the menu configure of the bottom of
light. Show as follow:
Button
Function
<ENTER>
Each operation to be
confirmed
<DOWN-<UP>
Down-Up
<MENU>
menu option
MENU
UP
DOWN
ENTER
5
6
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6

ABD Lighting 18X18W RGBWAP 6IN1 Manuale utente

Marca
ABD Lighting
Modello
18X18W RGBWAP 6IN1
Categoria
Stroboscopi
Tipo
Manuale utente
Scarica il pdf
rapporto

in altre lingue

Altri documenti