Gigabyte W480 VISION D Manuale del proprietario

W480 VISION D

User's Manual

Rev. 1001

12ME-W48VSD-1001R

For more product details, please visit GIGABYTE's website.

To reduce the impacts on global warming, the packaging materials of this product are

recyclable and reusable. GIGABYTE works with you to protect the environment.

Copyright

The trademarks mentioned in this manual are legally registered to their respective owners.

Disclaimer

Information in this manual is protected by copyright laws and is the property of GIGABYTE.

Changes to the specications and features in this manual may be made by GIGABYTE

without prior notice.

No part of this manual may be reproduced, copied, translated, transmitted, or published in

any form or by any means without GIGABYTE's prior written permission.

Documentation Classications

In order to assist in the use of this product, GIGABYTE provides the following types of docu-

mentations:

For quick set-up of the product, read the Quick Installation Guide included with the product.

For detailed product information, carefully read the User's Manual.

For product-related information, check on our website at: https://www.gigabyte.com

Identifying Your Motherboard Revision

The revision number on your motherboard looks like this: "REV: X.X." For example, "REV:

1.0" means the revision of the motherboard is 1.0. Check your motherboard revision before

updating motherboard BIOS, drivers, or when looking for technical information.

Example:

- 3 -

Table of Contents

Box Contents ...................................................................................................................5

Optional Items .................................................................................................................5

W480 VISION D Motherboard Layout ............................................................................. 6

W480 VISION D Motherboard Block Diagram ................................................................ 7

Chapter 1 Hardware Installation .....................................................................................9

1-1 Installation Precautions ................................................................................... 9

1-2 ProductSpecications ................................................................................... 10

1-3 Installing the CPU and CPU Cooler............................................................... 14

1-3-1 Installing the CPU ..................................................................................................14

1-3-2 Installing the CPU Cooler ......................................................................................16

1-4 Installing the Memory .................................................................................... 17

1-4-1 DualChannelMemoryConguration ....................................................................17

1-4-2 Installing a Memory ................................................................................................18

1-5 Installing an Expansion Card ......................................................................... 19

1-6 Setting up AMD CrossFire™Conguration .................................................... 20

1-7 Back Panel Connectors ................................................................................. 21

1-8 Internal Connectors ....................................................................................... 24

Chapter 2 BIOS Setup ..................................................................................................37

2-1 Startup Screen ............................................................................................... 38

2-2 The Main Menu .............................................................................................. 39

2-3 Favorites (F11) ............................................................................................... 41

2-4 Tweaker .......................................................................................................... 42

2-5 Settings .......................................................................................................... 48

2-6 System Info. ................................................................................................... 56

2-7 Boot ................................................................................................................ 57

2-8 Save & Exit .................................................................................................... 60

Chapter3 ConguringaRAIDSet ...............................................................................61

3-1 ConguringSATAControllers ........................................................................ 61

3-2 InstallingtheRAIDDriverandOperatingSystem ......................................... 75

3-3 Installing an Intel® Optane™ Memory ............................................................. 78

- 4 -

Chapter 4 Drivers Installation .......................................................................................81

4-1 Drivers & Software ......................................................................................... 81

4-2 Application Software ...................................................................................... 82

4-3 Information ..................................................................................................... 82

Chapter 5 Unique Features...........................................................................................83

5-1 BIOS Update Utilities ..................................................................................... 83

5-1-1 Updating the BIOS with the Q-Flash Utility .......................................................... 83

5-1-2 Updating the BIOS with the @BIOS Utility ........................................................... 86

5-1-3 Using Q-Flash Plus ................................................................................................87

5-2 APP Center .................................................................................................... 88

5-2-1 EasyTune ............................................................................................................... 89

5-2-2 Fast Boot ............................................................................................................... 90

5-2-3 Game Boost ...........................................................................................................91

5-2-4 RGBFusion ............................................................................................................92

5-2-5 Smart Backup ....................................................................................................... 94

5-2-6 System Information Viewer ................................................................................... 96

5-2-7 USB DAC-UP 2 ......................................................................................................97

Chapter 6 Appendix ......................................................................................................99

6-1 ConguringAudioInputandOutput .............................................................. 99

6-1-1 Conguring2/4/5.1/7.1-ChannelAudio ................................................................. 99

6-1-2 ConguringS/PDIFOut .......................................................................................102

6-1-3 Stereo Mix ............................................................................................................103

6-1-4 UsingtheVoiceRecorder ....................................................................................104

6-1-5 DTS:X® Ultra .........................................................................................................105

6-2 Troubleshooting ........................................................................................... 107

6-2-1 Frequently Asked Questions ...............................................................................107

6-2-2 Troubleshooting Procedure .................................................................................108

6-3 Debug LED Codes ........................................................................................110

RegulatoryNotices ..................................................................................................114

Contact Us ...............................................................................................................119

- 5 -

Box Contents

5W480 VISION D motherboard

5Motherboard driver disc

5User's Manual

5Quick Installation Guide

5Four SATA cables

5One antenna

5One G Connector

5Two thermistor cables

5OneRGBLEDstripextensioncable

Optional Items

2-portUSB2.0bracket(PartNo.12CR1-1UB030-6*R)

eSATAbracket(PartNo.12CF1-3SATPW-4*R)

3.5"FrontPanelwith2USB3.2Gen1ports(PartNo.12CR1-FPX582-2*R)

The box contents above are for reference only and the actual items shall depend on the product package you

obtain. The box contents are subject to change without notice.

- 6 -

W480 VISION D Motherboard Layout

(Note) For debug code information, please refer to Chapter 6.

DP_HDMI

LGA1200

ATX

AUDIO

DDR4_A1

DDR4_A2

DDR4_B1

DDR4_B2

BAT

Intel® W480

CLR_CMOS

M_BIOS

Intel® GbE LAN

CODEC

PCIEX16

PCIEX8

PCIEX4

F_U32C

F_U32

SYS_FAN6_PUMP

DB_PORT(Note)

EC_TEMP2

EC_TEMP1

SYS_FAN1

80110

M2A_CPU

80110

M2M_SB

60

80110

W480 VISION D

QFLASH_PLUS F_USB2 F_PANEL

D_LED1

F_AUDIO

SPI TPM F_USB1

LED_C1

SYS_FAN5_

PUMP

SYS_FAN3

CPU_FAN

CPU_OPT

SYS_FAN 4

iTE®

SuperI/O

D_LED2

LED_C2

ATX_12V_2X4ATX_12V_2X2

SATA3 351

240

CPU DRAM

VGA BOOT

USB20

TYPEC_1

U32G2_2

U32_LAN2

U32_LAN1

SYS_FAN2

PCIEX1

TYPEC_2

U32G2_1

CNVI

M2P_SB

Intel® 2.5GbE LAN

USB 3.2 Gen 1 Hub

Intel®

Thunderbolt™ 3

Controller

USB 2.0 Hub

QFLED

- 7 -

W480 VISION D Motherboard Block Diagram

LGA1200 CPU

CPUCLK+/-(100~500MHz)

DDR42933/2666/2400/2133MHz

PCI Express 3.0 Bus

DMI 3.0

LAN2

RJ45

Intel®

2.5GbE LAN

LPC

Bus

Center/Subwoofer

Speaker Out

Line Out

MIC

Line In

S/PDIFOut

RearSpeakerOut

CODEC

iTE®

SuperI/O

4USB2.0/1.1

2 USB 3.2 Gen 1

1 USB Type-C™, with

USB 3.2 Gen 2 support

2 USB 3.2 Gen 2

Type A

Intel® W480

x1

USB 2.0

Hub

x16

1 PCI Express

x16

x8

2 PCI Express

x8

Switch

or

1 DisplayPort IN

LAN1

RJ45

Intel®

GbE LAN

x1

PCI Express 3.0 Bus

Intel® Thunderbolt™ 3

Controller

or

2 Intel® Thunderbolt™ 3 2 USB Type-C™,

with USB 3.2 Gen 2

support

1 M.2 Socket 3 (M2A_CPU)

Switch 2SATA6Gb/s

(SATA3 0, 1)

Switch 2SATA6Gb/s

(SATA3 4, 5)

1 M.2 Socket 3 (M2M_SB)

2USB2.0/1.1

2SATA6Gb/s(SATA3 2, 3)

PCI Express 3.0 Bus

1 PCI

Express x1

DDI HDMI 1.4

SPI

Bus

BIOS

TPM

x4 x1

1 PCI

Express x4

M.2 CNVi

WIFI

1 M.2 Socket 3 (M2P_SB)

4 USB 3.2 Gen 1

USB 3.2

Gen 1 Hub

- 8 -

- 9 -

Hardware Installation

1-1 Installation Precautions

The motherboard contains numerous delicate electronic circuits and components which can become

damaged as a result of electrostatic discharge (ESD). Prior to installation, carefully read the user's

manual and follow these procedures:

•Prior to installation, make sure the chassis is suitable for the motherboard.

•Priorto installation, do notremove orbreak motherboard S/N(Serial Number)sticker or

warranty sticker provided by your dealer. These stickers are required for warranty validation.

•Always remove the AC power by unplugging the power cord from the power outlet before

installing or removing the motherboard or other hardware components.

•When connecting hardware components to the internal connectors on the motherboard, make

sure they are connected tightly and securely.

•When handling the motherboard, avoid touching any metal leads or connectors.

•It is best to wear an electrostatic discharge (ESD) wrist strap when handling electronic

components such as a motherboard, CPU or memory. If you do not have an ESD wrist strap,

keepyourhandsdryandrsttouchametalobjecttoeliminatestaticelectricity.

•Prior to installing the motherboard, please have it on top of an antistatic pad or within an

electrostatic shielding container.

•Before connecting or unplugging the power supply cable from the motherboard, make sure

the power supply has been turned off.

•Before turning on the power, make sure the power supply voltage has been set according to

the local voltage standard.

•Before using the product, please verify that all cables and power connectors of your hardware

components are connected.

•To prevent damage to the motherboard, do not allow screws to come in contact with the

motherboard circuit or its components.

•Make sure there are no leftover screws or metal components placed on the motherboard or

within the computer casing.

•Do not place the computer system on an uneven surface.

•Do not place the computer system in a high-temperature or wet environment.

•Turning on the computer power during the installation process can lead to damage to system

components as well as physical harm to the user.

•If you are uncertain about any installation steps or have a problem related to the use of the

product,pleaseconsultacertiedcomputertechnician.

•If you use an adapter, extension power cable, or power strip, ensure to consult with its installation

and/orgroundinginstructions.

Chapter 1 Hardware Installation

- 10 -

Hardware Installation

1-2 ProductSpecications

CPU LGA1200 package:

- Intel® Xeon® W series processors

-

10th Generation Intel

®

Core

™

processors/Intel

®

Pentium

®

processors/

Intel

®

Celeron

®

processors

(Go to GIGABYTE's website for the latest CPU support list.)

L3 cache varies with CPU

Chipset Intel® W480 Express Chipset

Memory Intel® Xeon® W-1290/W-1270 series processors/Intel® Core™ i9/i7 processors:

- SupportforDDR42933/2666/2400/2133MHz

 Intel® Xeon® W-1250 series processors/Intel® Core™ i5/i3/Pentium®/Celeron®

processors:

- SupportforDDR42666/2400/2133MHz

 4 x DDR4 DIMM sockets supporting up to 128 GB (32 GB single DIMM capacity)

of system memory

Dual channel memory architecture

 Support for ECC Un-buffered DIMM 1Rx8/2Rx8 memory modules

* To support ECC, you must install an Intel® Xeon processor.

Support for non-ECC Un-buffered DIMM 1Rx8/2Rx8/1Rx16 memory modules

Support for Extreme Memory Prole (XMP) memory modules

(Go to GIGABYTE's website for the latest supported memory speeds and memory

modules.)

Onboard

Graphics

Integrated Graphics Processor+Intel® Thunderbolt™ 3 Controller:

- 2 x Intel® Thunderbolt™ 3 connectors (USB Type-C™ ports), supporting

DisplayPort and Thunderbolt™ video outputs and a maximum resolution of

5120x2880@60Hzwith24bpp

* Because of the limited I/O resources of the PC architecture, the number of Thunderbolt™

devices that can be used is dependent on the number of the PCI Express devices being

installed. (Refer to Chapter 1-7, "Back Panel Connectors," for more information.)

* Support for DisplayPort 1.4 version, HDCP 2.3, and HDR.

Integrated Graphics Processor-Intel® HD Graphics support:

- 1xHDMIport,supportingamaximumresolutionof4096x2160@30Hz

* Support for HDMI 1.4 version and HDCP 2.3.

Maximum shared memory of 512 MB

Audio Realtek® ALC1220-VB codec

* The back panel line out jack supports DSD audio.

Support for DTS:X® Ultra

High Denition Audio

2/4/5.1/7.1-channel

Support for S/PDIF Out

LAN  1 x Intel® 2.5GbE LAN chip (2.5 Gbit/1 Gbit/100 Mbit)(LAN2)

 1 x Intel® GbE LAN chip (1 Gbit/100 Mbit) (LAN1)

Wireless

Communication

Module

Intel® Wi-Fi 6 AX201

- WIFIa,b,g,n,acwithwave2features,ax,supporting2.4/5GHzDual-Band

- BLUETOOTH 5

- Supportfor11ax160MHzwirelessstandardandupto2.4Gbpsdatarate

* Actualdataratemayvarydependingonenvironmentandequipment.

- 11 -

Hardware Installation

Expansion Slots  1 x PCI Express x16 slot, running at x16 (PCIEX16)

* Foroptimumperformance,ifonlyonePCIExpressgraphicscardistobeinstalled,

be sure to install it in the PCIEX16 slot.

1 x PCI Express x16 slot, running at x8 (PCIEX8)

* The PCIEX8 slot shares bandwidth with the PCIEX16 slot. When the PCIEX8 slot is

populated, the PCIEX16 slot operates at up to x8 mode.

 1 x PCI Express x16 slot, running at x4 (PCIEX4)

* The PCIEX4 slot shares bandwidth with the M2P_SB connector. The PCIEX4 slot

operates at up to x2 mode when a PCIe SSD is installed in the M2P_SB connector.

1 x PCI Express x1 slot

(All of the PCI Express slots conform to PCI Express 3.0 standard.)

Multi-Graphics

Technology  Support for AMD Quad-GPU CrossFire™ and 2-Way AMD CrossFire™ technologies

Storage Interface  1 x M.2 connector (Socket 3, M key, type 2280/22110 SATA and PCIe x4/x2

SSD support) (M2A_CPU)

 1 x M.2 connector (Socket 3, M key, type 2280/22110 SATA and PCIe x4/x2

SSD support) (M2M_SB)

 1 x M.2 connector (Socket 3, M key, type 2260/2280/22110 PCIe x4/x2 SSD

support) (M2P_SB)

6 x SATA 6Gb/s connectors

Support for RAID 0, RAID 1, RAID 5, and RAID 10

* Refer to "1-8 Internal Connectors," for the installation notices for the PCIEX4, M.2,

SATA connectors.

Intel® Optane™ Memory Ready

USB Chipset+Intel® Thunderbolt™ 3 Controller:

- 2 x USB Type-C™ ports on the back panel, with USB 3.2 Gen 2 support

Chipset:

- 1 x USB Type-C™ port with USB 3.2 Gen 2 support, available through the

internal USB header

- 2 x USB 3.2 Gen 2 Type-A ports (red) on the back panel

- 2 x USB 3.2 Gen 1 ports available through the internal USB header

- 2xUSB2.0/1.1portsonthebackpanel

Chipset+USB 3.2 Gen 1 Hub:

- 4 x USB 3.2 Gen 1 ports on the back panel

Chipset+USB 2.0 Hub:

- 4xUSB2.0/1.1portsavailablethroughtheinternalUSBheaders

Internal

Connectors

1 x 24-pin ATX main power connector

1 x 8-pin ATX 12V power connector

1 x 4-pin ATX 12V power connector

1 x CPU fan header

1 x water cooling CPU fan header

4 x system fan headers

2 x system fan/water cooling pump headers

2 x addressable LED strip headers

- 12 -

Hardware Installation

Internal

Connectors

2 x RGB LED strip headers

3 x M.2 Socket 3 connectors

6 x SATA 6Gb/s connectors

1 x front panel header

1 x front panel audio header

1 x USB Type-C™ header, with USB 3.2 Gen 2 support

1 x USB 3.2 Gen 1 header

2 x USB 2.0/1.1 headers

 1 x Trusted Platform Module header (For the GC-TPM2.0 SPI/GC-TPM2.0 SPI

2.0 module only)

2 x temperature sensor headers

1 x Clear CMOS jumper

1 x Q-Flash Plus button

Back Panel

Connectors

1 x DisplayPort In port

2 x Thunderbolt™ 3 connectors (USB Type-C™ ports, with USB 3.2 Gen 2 support)

1 x HDMI port

2 x SMA antenna connectors (2T2R)

2 x USB 3.2 Gen 2 Type-A ports (red)

4 x USB 3.2 Gen 1 ports

2 x USB 2.0/1.1 ports

2 x RJ-45 ports

1 x optical S/PDIF Out connector

5 x audio jacks

I/O Controller iTE® I/O Controller Chip

Hardware

Monitor

Voltage detection

Temperature detection

Fan speed detection

Water cooling ow rate detection

Overheating warning

Fan fail warning

Fan speed control

* Whether the fan (pump) speed control function is supported will depend on the fan

(pump) you install.

BIOS 1 x 256 Mbit ash

Use of licensed AMI UEFI BIOS

PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0

Unique Features Support for APP Center

* Available applications in APP Center may vary by motherboard model. Supported

functions of each application may also vary depending on motherboard specications.

- @BIOS

- EasyTune

- Fast Boot

- Game Boost

- ON/OFFCharge

- RGBFusion

- 13 -

Hardware Installation

Please visit GIGABYTE's website

for support lists of CPU, memory

modules, SSDs, and M.2 devices.

Please visit the Support\Utility List

page on GIGABYTE's website to

download the latest version of apps.

Unique Features - Smart Backup

- System Information Viewer

- USB DAC-UP 2

Support for Q-Flash Plus

Support for Q-Flash

Support for Xpress Install

Bundled

Software

Norton® Internet Security (OEM version)

cFosSpeed

Operating

System Support for Windows 10 64-bit

Form Factor ATX Form Factor; 30.5cm x 24.4cm

* GIGABYTE reserves the right to make any changes to the product specications and product-related information without

prior notice.

- 14 -

Hardware Installation

1-3 Installing the CPU and CPU Cooler

1-3-1 Installing the CPU

A. Locate the alignment keys on the motherboard CPU socket and the notches on the CPU.

Please visit GIGABYTE's website for details on hardware installation.

ReadthefollowingguidelinesbeforeyoubegintoinstalltheCPU:

•Make sure that the motherboard supports the CPU.

(Go to GIGABYTE's website for the latest CPU support list.)

•Always turn off the computer and unplug the power cord from the power outlet before installing the

CPU to prevent hardware damage.

•Locate the pin one of the CPU. The CPU cannot be inserted if oriented incorrectly. (Or you may

locate the notches on both sides of the CPU and alignment keys on the CPU socket.)

•Apply an even and thin layer of thermal grease on the surface of the CPU.

•Do not turn on the computer if the CPU cooler is not installed, otherwise overheating and damage

of the CPU may occur.

•SettheCPUhostfrequencyinaccordancewiththeCPUspecications.Itisnotrecommended

thatthesystembusfrequencybesetbeyondhardwarespecicationssinceitdoesnotmeetthe

standard requirements for the peripherals. If you wish to set the frequency beyond the standard

specications,pleasedosoaccordingtoyourhardwarespecicationsincludingtheCPU,graphics

card, memory, hard drive, etc.

Triangle Pin One Marking on the CPU

NotchNotch

LGA1200 CPU

Alignment

Key

Alignment

Key

LGA1200 CPU Socket

Pin One Corner of the CPU Socket

- 15 -

Hardware Installation

B. Follow the steps below to correctly install the CPU into the motherboard CPU socket.

•Before installing the CPU, make sure to turn off the computer and unplug the power cord from

the power outlet to prevent damage to the CPU.

•To protect the socket contacts, do not remove the protective plastic cover unless the CPU is

inserted into the CPU socket. Save the cover properly and replace it if the CPU is removed.

Step 1:

Gently press the CPU socket lever handle down

andawayfromthesocketwithyournger.Then

completely lift the CPU socket lever and the metal

loadplate/plasticcoverwillbeliftedaswell.

Step 2:

HoldtheCPUwithyourthumbandindexngers.

Align the CPU pin one marking (triangle) with the

pin one corner of the CPU socket (or you may align

the CPU notches with the socket alignment keys)

and gently insert the CPU into position.

Step 4:

Finally, secure the lever under its retention tab to

complete the installation of the CPU.

NOTE:

Hold the CPU socket lever by the handle, not the lever base portion.

Step 3:

Once the CPU is properly inserted, carefully

replace the load plate. When replacing the load

plate, make sure the front end of the load plate

is under the shoulder screw. Then press the CPU

socket lever. The protective plastic cover may

pop off from the load plate during the process of

engagingthelever.Removethecover.(Savethe

cover properly and always replace it when the

CPU is not installed.)

- 16 -

Hardware Installation

1-3-2 Installing the CPU Cooler

RefertothestepsbelowtocorrectlyinstalltheCPUcooleronthemotherboard.(Actualinstallationprocessmay

differdependingtheCPUcoolertobeused.Refertotheuser'smanualforyourCPUcooler.)

Step 5:

After the installation, check the back of the

motherboard. If the push pin is inserted as the

picture above shows, the installation is complete.

Step 6:

Finally, attach the power connector of the CPU

cooler to the CPU fan header (CPU_FAN) on the

motherboard.

Step 1:

Apply an even and thin layer of thermal grease on

the surface of the installed CPU.

Step 2:

Before installing the cooler, note the direction of the

arrow sign on the male push pin. (Turning the

push pin along the direction of arrow is to remove

the cooler, on the contrary, is to install.)

Step 3:

Place the cooler atop the CPU, aligning the

four push pins through the pin holes on the

motherboard. Push down on the push pins

diagonally.

Step 4:

You should hear a "click" when pushing down each

push pin. Check that the Male and Female push

pins are joined closely.

(RefertoyourCPUcoolerinstallationmanualfor

instructions on installing the cooler.)

Male

Push Pin

Female

Push Pin

The Top

of Female

Push Pin

Direction of

the Arrow Sign

on the Male

Push Pin

- 17 -

Hardware Installation

1-4 Installing the Memory

Readthefollowingguidelinesbeforeyoubegintoinstallthememory:

•Make sure that the motherboard supports the memory. It is recommended that memory of the same

capacity, brand, speed, and chips be used.

(Go to GIGABYTE's website for the latest supported memory speeds and memory modules.)

•Always turn off the computer and unplug the power cord from the power outlet before installing the

memory to prevent hardware damage.

•Memory modules have a foolproof design. A memory module can be installed in only one direction.

If you are unable to insert the memory, switch the direction.

1-4-1 DualChannelMemoryConguration

This motherboard provides four memory sockets and supports Dual Channel Technology. After the memory

isinstalled,theBIOSwillautomaticallydetectthespecicationsandcapacityofthememory.EnablingDual

Channel memory mode will double the original memory bandwidth.

The four memory sockets are divided into two channels and each channel has two memory sockets as following:

ChannelA:DDR4_A1,DDR4_A2

ChannelB:DDR4_B1,DDR4_B2

Due to CPU limitations, read the following guidelines before installing the memory in Dual Channel mode.

1. Dual Channel mode cannot be enabled if only one memory module is installed.

2. When enabling Dual Channel mode with two or four memory modules, it is recommended that memory

of the same capacity, brand, speed, and chips be used.

DDR4_A1

DDR4_A2

DDR4_B1

DDR4_B2

RecommandedDualChannelMemoryConguration:

(SS=Single-Sided, DS=Double-Sided, "- -"=No Memory)

DDR4_A1 DDR4_A2 DDR4_B1 DDR4_B2

2 Modules - - DS/SS - - DS/SS

4 Modules DS/SS DS/SS DS/SS DS/SS

- 18 -

Hardware Installation

Notch

DDR4DIMM

ADDR4memorymodulehasanotch,soitcanonlytinonedirection.Followthestepsbelowtocorrectlyinstall

your memory modules in the memory sockets.

Step 1:

Note the orientation of the memory module. Spread the retaining clips

at both ends of the memory socket. Place the memory module on the

socket.Asindicatedinthepictureontheleft,placeyourngerson

the top edge of the memory, push down on the memory and insert it

vertically into the memory socket.

Step 2:

The clips at both ends of the socket will snap into place when the

memory module is securely inserted.

1-4-2 Installing a Memory

Before installing a memory module, make sure to turn off the computer and unplug the power cord

from the power outlet to prevent damage to the memory module. DDR4 and DDR3 DIMMs are not

compatible to each other or DDR2 DIMMs. Be sure to install DDR4 DIMMs on this motherboard.

- 19 -

Hardware Installation

1-5 Installing an Expansion Card

Readthefollowingguidelinesbeforeyoubegintoinstallanexpansioncard:

•Make sure the motherboard supports the expansion card. Carefully read the manual that came

with your expansion card.

•Always turn off the computer and unplug the power cord from the power outlet before installing an

expansion card to prevent hardware damage.

Follow the steps below to correctly install your expansion card in the expansion slot.

1. Locateanexpansionslotthatsupportsyourcard.Removethemetalslotcoverfromthechassisbackpanel.

2. Align the card with the slot, and press down on the card until it is fully seated in the slot.

3. Make sure the metal contacts on the card are completely inserted into the slot.

4. Secure the card's metal bracket to the chassis back panel with a screw.

5. After installing all expansion cards, replace the chassis cover(s).

6. Turn on your computer. If necessary, go to BIOS Setup to make any required BIOS changes for your

expansion card(s).

7. Install the driver provided with the expansion card in your operating system.

Example:InstallingandRemovingaPCIExpressGraphicsCard:

•Installing a Graphics Card:

Gently push down on the top edge of the card until

it is fully inserted into the PCI Express slot. Make

sure the card is securely seated in the slot and

does not rock.

•RemovingtheCard:

Gently push back on the lever on the slot and then lift the card straight out from

the slot.

PCI Express x1 Slot

PCI Express x16 Slot

- 20 -

Hardware Installation

B. Connecting the Graphics Cards

Step 1:

Observe the steps in "1-5 Installing an Expansion Card" and install the graphics cards on the PCIEX16 and

PCIEX8 slots.

Step 2:

Insert the CrossFire (Note) bridge connectors in the CrossFire gold edge connectors on top of the cards.

Step 3:

Plug the display cable into the graphics card on the PCIEX16 slot.

Procedure and driver screen for enabling CrossFire technology may differ by graphics cards and

driverversion.Refertothemanualthatcamewithyourgraphicscardsformoreinformationabout

enabling CrossFire technology.

1-6 Setting up AMD CrossFire™Conguration

(Note) The bridge connectors may be needed or not depending on your graphics cards.

A. System Requirements

-Windows 10 64-bit operating system

-A CrossFire-supported motherboard with two PCI Express x16 slots and correct driver

-CrossFire-ready graphics cards of identical brand and chip and correct driver

-CrossFire (Note) bridge connector(s)

-Apowersupplywithsufcientpowerisrecommended(Refertothemanualofyourgraphicscardsforthe

power requirement)

C.ConguringtheGraphicsCardDriver

To Enable CrossFire Function

After installing the graphics card driver in the operating

system, go to the AMD RADEON SETTINGS screen.

Browse to Gaming\Global Settings and ensure AMD

CrossFire is set to On.

La pagina sta caricando ...

Gigabyte W480 VISION D Manuale del proprietario

Gigabyte W480 VISION D Manuale del proprietario

in altre lingue

Documenti correlati

Altri documenti