JVC GZ-MC500U Istruzioni per l'uso

MasterPage: Cover

GZ-MC500U

LYT1423-001A

EN

ENGLISH

DIGITAL MEDIA CAMERA

GETTING STARTED

7

VIDEO RECORDING &

PLAYBACK

20

MENU SETTINGS

48

52

To deactivate the demonstration,

set “DEMO MODE” to “OFF”.

(

墌 pg. 48)

For Customer Use:

Enter below the Model No. and

Serial No. which is located on the

bottom of the camera. Retain this

information for future reference.

Model No.

Serial No.

REFERENCES

INSTRUCTIONS

STILL IMAGE RECORDING

& PLAYBACK

25

VOICE RECORDING &

PLAYBACK

29

ADVANCED OPERATIONS

31

GZ-MC500US.book Page 1 Wednesday, April 13, 2005 7:08 PM

2 EN

MasterPage: Body_Left

Removable Hard Disk

In contrast to conventional digital video cameras

that record to DV tapes, the removable hard disk

is a new type of card media that enables

extended hours of high-resolution, MPEG2

video recording. (墌 pg. 6)

Various Recording Media and Modes

Video and still images can be

recorded to CompactFlash card

(CF card) and SD memory card.

The removable hard disk

(provided) or Microdrive

®

is a

type of CF card compliant with

CF+ Type II.

You can select the most suitable

recording medium and mode for picture quality,

image size, recording time, and computer

environment. (墌 pg. 62)

Voice Recording Features

The camera can be

used as a voice

recorder for audio

recordings. (墌 pg. 29)

Various Recording Features

The camera supports aperture-priority, shutter-

priority, portrait, bracket shooting, and a wide

range of other functions that you can select

according to the scene you are shooting.

(墌 pg. 31 – 36)

Enjoying Various Playback Features

Unlike tape operation, playback is simple and

easy in this camera since no time is needed for

rewinding or fast forward operations.

Playlist, playback effects,

and other functions are

also available for

enjoying many different

types of playback.

Editing Files on your PC

USB 2.0 enables the

smooth transfer of video

and still images to a

computer. With the

bundled Cyberlink

software, you can easily

edit video and create your own DVDs. (Refer to

the software installation and USB connection

guide.)

Direct Printing

If your printer is

compatible with

PictBridge, still images

can be printed easily by

connecting the camera with USB cable directly

to the printer. (墌 pg. 47)

Major Features of this Camera

VOICE RECORDING

[5h56m] 12:55:01

NOV 20.2005 11:30AM

ALL SCENES

01 NOV 10.05 11:30AM

02 NOV 15.05 11:00PM

03 NOV 25.05 11:00AM

PLAYLIST CONTENTS

GZ-MC500US.book Page 2 Wednesday, April 13, 2005 7:08 PM

EN 3

MasterPage: Reference_Heading0_Right

GETTING STARTED 7

Provided Accessories ...................................... 7

Index .............................................................. 10

Power ............................................................. 14

Operation Mode ............................................. 16

Language Setting .......................................... 16

Date/Time Settings ........................................ 17

Inserting/Removing a CF Card ...................... 17

Inserting/Removing an SD Card .................... 18

Formatting a Recording Medium ................... 19

Selecting Recording Medium ......................... 19

VIDEO RECORDING & PLAYBACK 20

Video Recording ............................................ 20

Zooming ..................................................... 21

Angle Adjustment ...................................... 21

Video Playback .............................................. 22

How to Use the Scroll Bar ......................... 22

Various Playback Operations .................... 23

Playback Zoom .......................................... 23

Connecting to a TV or VCR ........................... 24

Playback on a TV ...................................... 24

Dubbing to a VCR ...................................... 24

STILL IMAGE RECORDING & PLAYBACK 25

Still Image Recording ..................................... 25

Zooming ..................................................... 25

Continuous Shooting ................................. 26

Flash .......................................................... 26

Still Image Playback ...................................... 27

Slide Show ................................................. 27

Index Screen of Still Image Files ............... 27

How to Use the Scroll Bar ......................... 28

Image Rotation .......................................... 28

Playback Zoom .......................................... 28

VOICE RECORDING & PLAYBACK 29

Voice Recording ............................................ 29

Voice Playback .............................................. 30

Various Playback Operations .................... 30

ADVANCED OPERATIONS 31

RECORDING FEATURES ..................................... 31

Backlight Compensation ................................ 31

Spot Exposure Control ................................... 31

Program AE ................................................... 31

Bracket Shooting ........................................... 33

Manual Focus ................................................ 33

Manual Settings in MSET Menu .................... 34

How to Select a Menu Item ....................... 34

Manual Exposure ....................................... 35

White Balance ........................................... 35

Effect ......................................................... 36

PLAYBACK FEATURES ....................................... 37

Wipe or Fader Effects .................................... 37

Playback Effects ............................................ 37

MANAGING FILES ............................................. 38

Viewing File Information ................................ 38

Protecting Files .............................................. 39

Deleting Files ................................................. 40

Cleaning Up a Recording Medium ................. 41

Copying/Moving Still Image Files ................... 41

Resetting the File Number ............................. 42

Creating Play List ........................................... 43

Playing Back Play List ................................... 44

DPOF Print Setting ........................................ 46

Direct Printing with a PictBridge Printer ......... 47

MENU SETTINGS 48

Changing the Menu Settings ......................... 48

Common Menus for All Modes ...................... 48

Video Recording Menus ................................ 50

Video Playback Menus .................................. 50

Still Image Recording Menus ......................... 51

Still Image Playback Menus ........................... 51

Voice Recording Menus ................................. 51

Voice Playback Menus .................................. 51

REFERENCES 52

Troubleshooting ............................................. 52

Warning Indications ....................................... 54

Cleaning the Camera ..................................... 56

Cautions ......................................................... 57

Specifications ................................................. 60

TERMS ............................................... Back cover

Contents

GZ-MC500US.book Page 3 Wednesday, April 13, 2005 7:08 PM

4 EN

MasterPage: Safty_Left

SAFETY PRECAUTIONS

Dear Customer,

Thank you for purchasing this digital media

camera. Before use, please read the safety

information and precautions contained in the

pages 4 – 5 to ensure safe use of this product.

WARNING: TO PREVENT FIRE OR SHOCK

HAZARD, DO NOT EXPOSE THIS UNIT TO

RAIN OR MOISTURE.

CAUTIONS:

● This camera is designed to be used with

NTSC-type color television signals. It cannot

be used for playback with a television of a

different standard. However, live recording and

LCD monitor playback are possible anywhere.

● Use the JVC BN-VM200U battery pack and, to

recharge it or to supply power to the camera

from an AC outlet, use the provided multi-

voltage AC adapter. (An appropriate

conversion adapter may be necessary to

accommodate different designs of AC outlets in

different countries.)

NOTES:

● The rating plate (serial number plate) and

safety caution are on the bottom and/or the

back of the main unit.

● The rating information and safety caution of the

AC adapter are on its upper and lower sides.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK).

NO USER-SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

The lightning flash with arrowhead symbol, within an

equilateral triangle, is intended to alert the user to the

presence of uninsulated "dangerous voltage" within the

product's enclosure that may be of sufficient magnitude

to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is

intended to alert the user to the presence of import

ant

operating and maintenance (servicing) instructions in

the literature accompanying the appliance.

This product has a fluorescent lamp that contains

a small amount of mercury. Disposal of these

materials may be regulated in your community

due to environmental considerations.

For disposal or recycling information please

contact your local authorities, or the Electronics

Industries Alliance:

<http://www.eiae.org>

When the equipment is installed in a cabinet or

on a shelf, make sure that it has sufficient space

on all sides to allow for ventilation (10 cm (3-15/

16") or more on both sides, on top and at the

rear).

Do not block the ventilation holes.

(If the ventilation holes are blocked by a

newspaper, or cloth etc. the heat may not be able

to get out.)

No naked flame sources, such as lighted candles,

should be placed on the apparatus.

When discarding batteries, environmental

problems must be considered and the local rules

or laws governing the disposal of these batteries

must be followed strictly.

The apparatus shall not be exposed to dripping or

splashing.

Do not use this equipment in a bathroom or

places with water.

Also do not place any containers filled with water

or liquids (such as cosmetics or medicines, flower

vases, potted plants, cups etc.) on top of this unit.

(If water or liquid is allowed to enter this

equipment, fire or electric shock may be caused.)

Do not point the lens directly into the sun. This

can cause eye injuries, as well as lead to the

malfunctioning of internal circuitry. There is also a

risk of fire or electric shock.

CAUTION!

The following notes concern possible physical

damage to the camera and to the user.

Do not use a tripod on unsteady or unlevel

surfaces. It could tip over, causing serious

damage to the camera.

CAUTION!

Connecting cables (Audio/Video, S-Video, etc.) to

the camera and leaving it on top of the TV is not

recommended, as tripping on the cables will

cause the camera to fall, resulting in damage.

GZ-MC500US.book Page 4 Wednesday, April 13, 2005 7:08 PM

EN 5

MasterPage: Safty_Right

IMPORTANT SAFETY INSTRUCTIONS

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings. Install in

accordance with the manufacturer’s instructions.

8. Do not install near any heat sources such as

radiators, heat registers, stoves, or other

apparatus (including amplifiers) that produce

heat.

9. Only use attachments/accessories specified by

the manufacturer.

10. Use only with the

cart, stand, tripod,

bracket, or table

specified by the

manufacturer, or

sold with the

apparatus. When a

cart is used, use

caution when

moving the cart/

apparatus combination to avoid injury from tip-

over.

11. Unplug this apparatus during lightning storms or

when unused for long periods of time.

12. Refer all servicing to qualified service

personnel. Servicing is required when the

apparatus has been damaged in any way, such

as power-supply cord or plug is damaged, liquid

has been spilled or objects have fallen into the

apparatus, the apparatus has been exposed to

rain or moisture, does not operate normally, or

has been dropped.

Before Using this Camera

This camera is designed exclusively for

CompactFlash Card (CF card) and SD Memory

Card.

The removable hard disk (provided) or

Microdrive

®

is a type of CF card compliant with

CF+ Type II.

This camera records video in MPEG2 format

compliant with SD-VIDEO format.

Remember that this camera is not compatible

with other digital video formats.

Remember that this camera is intended for

private consumer use only.

Any commercial use without proper permission is

prohibited. (Even if you record an event such as a

show, performance or exhibition for personal

enjoyment, it is strongly recommended that you

obtain permission beforehand.)

Before recording important video, be sure to

make a trial recording.

Play back your trial recording to make sure the

video and audio have been recorded properly.

Make a backup of important recorded data

Protect your important recorded data by copying the

files to PC. It is recommended to copy it from your

PC to a DVD or other recording media for storage.

Refer to the software installation and USB

connection guide.

Bring your camera together with the removable

hard disk

When requesting repairs for breakdowns by your

dealer or JVC service center, be sure to bring your

camera together with the removable hard disk. If

one of them is not included, the cause cannot be

diagnosed, and the repair cannot be made properly.

Also read “Cautions” on pages 57 to 59.

● Manufactured under license from Dolby

Laboratories. “Dolby” and double-D symbol are

trademarks of Dolby Laboratories.

● Microdrive

®

is a registered trademark of Hitachi

Global Storage Technologies, Inc. in the United

States and/or other countries.

●

MascotCapsule is registered trademark of HI

CORPORATION in Japan.

reserved.

● Other product and company names included in

this instruction manual are trademarks and/or

registered trademarks of their respective holders.

GZ-MC500US.book Page 5 Wednesday, April 13, 2005 7:08 PM

6 EN

MasterPage: Safty_Left

Removable Hard Disk

The removable hard disk is a precision

electronic device. Be careful when handling it.

Cautions for external jolt or stress

● After removing the disk from the camera, store it

by inserting into the supplied protective case.

● Do not press on the

cover.

● Do not subject the disk

to vibrations or sudden

jolts. Be especially

careful to avoid sudden jolts when shooting or

during playback.

● Do not affix stickers or write on the label.

● Do not apply strong pressure to the outside of the

disk. Also, do not put it in your pants pocket or

other location where it can be pressed on.

Cautions for temperature

● The camera’s protection circuit may work for the

proper recording or playback when the camera’s

internal temperature rises or during usage in a

cold location. (墌 pg. 55)

● The camera and removable hard disk can heat up

when used for an extended period. However, this

is not a malfunction.

● The disk can heat up when used for an extended

period. Therefore, do not remove it immediately

from the camera.

Other cautions

● Condensation can cause the drive to break down.

If water is splashed on the drive, make sure that it

is completely dried before usage.

● Do not use, replace, or store the disk in locations

that are exposed to strong static electricity or

electrical noise.

● Do not turn off the camera power or remove the

battery or AC adapter during shooting, playback,

or when otherwise accessing the recording

medium.

● Do not bring the recording medium near objects

that have a strong magnetic field or that emit

strong electromagnetic waves.

● Since data must be read and written by the drive

correctly, the camera may be unable to shoot

when the camera heats up, such as during

continuous shooting, or when the camera is

cooled down during usage in a cold location. To

fix this problem, follow the messages displayed

on the screen. (墌 pg. 55)

● To maintain high performance, perform check

disks (error checks) using your computer on a

regular basis. Use a USB cable to connect the

camera and PC, and then perform the check disk

on the removable hard disk using the same

procedure as a regular local disk (C drive). Refer

to the instruction manual of your PC for check

disks.

● Clean up the disk regularly to maintain high

performance. (墌 pg. 41, 49)

Also read “Recording Medium” on page 58.

Be careful to completely delete data when

discarding or giving away the removable hard

disk.

When recording data is formatted or deleted on the

camera, this only modifies the file management

information, and the data is not completely erased.

When discarding or giving away the removable hard

disk, to prevent problems caused by the release of

sensitive information, it is extremely important that

the customer take responsibility to erase all

recorded data. Some recommended methods of

erasing data include using a commercial data

removal program or using a hammer or strong

magnet to physically or magnetically destroy the

data on the hard disk so that it cannot be read. JVC

shall not be responsible for any personal data that is

released.

GZ-MC500US.book Page 6 Wednesday, April 13, 2005 7:08 PM

EN 7

GETTING STARTED

MasterPage: Heading0_Right

GETTING STARTED

a AC Adapter AP-V14U

b Battery Pack BN-VM200U

c S-Video/Audio/Video Cable

d USB Cable (Refer to the software installation

and USB connection guide.)

e Removable Hard Disk (4 GB)

f Protective Case for Removable Hard Disk

g Strap (See page 8 for attachment)

h Lens Cap (See page 8 for attachment)

i CD-ROM

j Audio Extension Cable (for optional

headphones, see page 9 for attachment)

k Core Filter for Cables (See page 9 for

attachment)

Large (x 1): S-Video/Audio/Video Cable

Medium (x 1): USB Cable

Small (x 2): Audio Extension Cable and AC

Adapter’s Cord

l Lens Hood (Already attached to the camera,

墌 pg. 8)

NOTES:

● In order to maintain optimum performance of the

camera, provided cables may be equipped with

one or more core filter. If a cable has only one

core filter, the end that is closest to the filter

should be connected to the camera.

● Make sure to use the provided cables for

connections. Do not use any other cables.

Provided Accessories

The removable hard disk and its protective

case are packaged in a silver bag.

GZ-MC500US.book Page 7 Wednesday, April 13, 2005 7:08 PM

8 EN

GETTING STARTED

MasterPage: Body_Left

Attaching the Strap

1 Press and hold both

sides as shown, then

detach the fastener (large).

2 Pass the strap ring

through the eyelet on the

lens side.

3 Pass through the strap

ring.

4 Pass the fastener’s ring

through the eyelet on the

LCD side.

5 Pass through the

fastener’s ring.

6 Connect the fastener.

When shooting

Hold the camera as shown

in the illustration, grip it

gently so that it feels

secure, then adjust the

strap.

To secure the camera so

it cannot be dropped

during shooting

Detach the fastener from

the strap as shown in step

1.

Put your hand through the

strap, then secure the strap

to your wrist so that the

camera cannot be

dropped.

Attaching/Detaching the Lens Hood

The provided lens hood helps block out glare

when shooting under bright sunlight, the same

way professional photographers do.

To attach

Align the lens hood with the camera’s lens, and

then turn the hood clockwise a.

To detach

Turn the hood counterclockwise b.

● Detach the hood only when using the optional

conversion lens or lens filter.

Attaching the Lens Cap

To protect the lens, attach the provided lens cap

to the camera as shown in the illustration.

NOTE:

To confirm the lens cap is on correctly, make sure

the cap is flush to the camera.

Pull the strap.

Slide the fastener.

GZ-MC500US.book Page 8 Wednesday, April 13, 2005 7:08 PM

GETTING STARTED

EN 9

GETTING STARTED

MasterPage: Start_Right

Attaching the Core Filter

Attach the core filters to the cables. The core

filter reduces interference.

1 Release the stoppers on both ends of the

core filter.

2 Run the cable through the core filter, leaving

approx. 3 cm of cable between the cable plug

and the core filter.

Wind the cable once around the outside of the

core filter as shown in the illustration.

● Wind the cable so that it is not slack.

3 Close the core filter until it clicks shut.

NOTES:

● Take care not to damage the cable.

● When connecting a cable, attach the end with the

core filter to the camera.

How to Use the Audio Extension Cable

When using optional headphones, connect to

the provided audio extension cable (with a core

filter attached), then connect the audio extension

cable to the camera. The core filter reduces

interference.

Stopper

Wind once.

Core Filter

3 cm (1-3/16")

Audio Extension Cable (provided)

Core Filter

Open the cover.

Headphones

To

GZ-MC500US.book Page 9 Wednesday, April 13, 2005 7:08 PM

10 EN

MasterPage: Heading0_Left

GETTING STARTED

Index

A

TTENTION:

● Be careful not to cover X, d and e

during shooting.

● Be careful not to cover

Y during

playback.

GZ-MC500US.book Page 10 Wednesday, April 13, 2005 7:08 PM

GETTING STARTED

EN 11

GETTING STARTED

MasterPage: Start_Right

Controls

a Mode Button [MODE] (墌 pg. 16)

b Recording Mode Dial (墌 pg. 16, 31 – 32)

c Lock Button (墌 pg. 16)

d Power Switch [OFF, , ] (墌 pg. 16)

e Battery/CF Card Cover Open Switch [OPEN]

(墌 pg. 14, 17)

f Delete Button [ ] (墌 pg. 40)

g Zoom Lever [T/W] (墌 pg. 21, 25)

Speaker Volume Control (墌 pg. 22, 30)

h Recording Start/Stop Button

(墌 pg. 20, 25, 29)

i Play/Pause Button [49] (墌 pg. 22, 27, 30)

j Multi-Controller

w: Reverse Search [w (

3

)] (墌 pg. 23)/Left

[w]/Flash [ ] (墌 pg. 26)

r: Reverse Skip [r (

2

)] (墌 pg. 23)/Up [r]/

Backlight Compensation [ ] (墌 pg. 31)/

Spot Exposure Control (墌 pg. 31)

e: Forward Search [e (

5

)] (墌 pg. 23)/

Right [e]/Continuous Shooting/Bracket

Shooting [ / ] (墌 pg. 26, 33)

t: Forward Skip [t (

6

)] (墌 pg. 23)/Down

[t]/Manual Set [ SET] (墌 pg. 34)

k Focus Button [FOCUS] (墌 pg. 33)

l Information Button [INFO] (墌 pg. 38)

m Menu Button [MENU] (墌 pg. 48)

n Flash Open Switch [FLASH OPEN]

(墌 pg. 26)

o Manual Focus Ring (墌 pg. 33)

p Lens Hood (墌 pg. 8)

Connectors

The connectors are located beneath the covers.

Q USB (Universal Serial Bus) Connector (Refer

to the software installation and USB

connection guide.)

R Headphone Connector [ ] (墌 pg. 9)

S S-Video/Audio/Video Output Connector [AV]

(墌 pg. 24)

T DC Input Connector [DC] (墌 pg. 14)

Indicators

U Power/Charge Lamp (墌 pg. 14, 16)

V Access Lamp (Lights up or blinks when you

access to any files. Do not turn off the power

or remove the battery pack/AC adapter while

accessing to files during recording or

playback.)

W Mode Lamp [ (video), (still image),

(voice)] (墌 pg. 16)

Other Parts

X Stereo Microphone

Y Speaker (墌 pg. 22)

a LCD Monitor

b Battery/CF Card Cover (墌 pg. 14, 17)

c Flash

d Camera Sensor

e Lens

f SD Card Cover (墌 pg. 18)

g Tripod Mounting Socket

h Strap Fastener Eyelet (墌 pg. 8)

i Strap Eyelet (墌 pg. 8)

j Reset Hole (墌 pg. 52)

GZ-MC500US.book Page 11 Wednesday, April 13, 2005 7:08 PM

12 EN

GETTING STARTED

MasterPage: Body_Left

Indications on LCD Monitor

During both Video and Still Image Recording

a Recording Mode Indicator (墌 pg. 16)

: Auto Mode

: Manual Mode

b Tele Macro Mode Indicator (墌 pg. 50)

c Approximate Zoom Ratio (墌 pg. 21, 50)

d Zoom Indicator (墌 pg. 21, 50)

e Iris Lock Indicator (墌 pg. 31, 35)

f Shutter Speed (墌 pg. 32)

g Brightness Control Indicator (墌 pg. 49)

h Battery Indicator (墌 pg. 54)

i Date/Time (墌 pg. 49)

j Selected Medium Indicator (墌 pg. 19, 49)

k Manual Focus Adjustment Indicator

(墌 pg. 33)

l Effect Mode Indicator (墌 pg. 36)

m White Balance Indicator (墌 pg. 35)

n Program AE Mode Indicator (墌 pg. 31)

o ±: Exposure Adjustment Indicator (墌 pg. 35)

: Backlight Compensation Indicator

(墌 pg. 31)

: Spot Exposure Control Indicator

(墌 pg. 31)

During Video Recording only

a Mode Indicator (墌 pg. 16)

b Wide Mode Indicator (墌 pg. 50)

c Wind Cut Indicator (墌 pg. 50)

d Picture Quality: [U] (ultra fine), [F] (fine), [N]

(normal), [E] (economy) (墌 pg. 50)

e Remaining Time (墌 pg. 20, 62)

f Counter (墌 pg. 49)

g 7REC: (Appears during recording.)

(墌 pg. 20)

79: (Appears during record-standby mode.)

(墌 pg. 20)

h Digital Image Stabilizer (DIS) Indicator

(墌 pg. 50)

During Still Image Recording only

a Mode Indicator (墌 pg. 16)

b ISO sensitivity (GAIN) (墌 pg. 51)

(When set to [AUTO], there is no indication.)

c Focus Icon (墌 pg. 25)

d Image Size: 2560 (2560 x 1920), 2048 (2048

x1536), 1600 (1600 x 1200), 1280 (1280 x

960), 640 (640 x 480) (墌 pg. 51)

e Picture Quality: FINE (fine) or STANDARD

(standard) (墌 pg. 51)

f Flash Mode Indicator (墌 pg. 26)

g Remaining Number of Shots (墌 pg. 63)

h : Continuous Shooting Mode Indicator

(墌 pg. 26)

: Bracket Shooting Mode Indicator

(墌 pg. 33)

i Shooting Icon (墌 pg. 25)

j Self-Timer Recording Indicator (墌 pg. 51)

NOTE:

For the indications on LCD monitor during voice

recording, see page 29.

11:30AM

NOV 10. 2005

[0h56m]

FINE

PHOTO

GZ-MC500US.book Page 12 Wednesday, April 13, 2005 7:08 PM

GETTING STARTED

EN 13

GETTING STARTED

MasterPage: Start_Right

During Video Playback

a Mode Indicator (墌 pg. 16)

b Play List Playback Indicator (Appears when

play list is played back. 墌 pg. 44)

c Picture Quality: [U] (ultra fine), [F] (fine), [N]

(normal), [E] (economy) (墌 pg. 50)

d Playback Mode (墌 pg. 22)

U : Playback

9 : Pause

5

: Forward High-Speed Search

3

: Reverse High-Speed Search

9U : Forward Slow-Motion

Y9 : Reverse Slow-Motion

(The number on the left shows speed.)

e Counter (墌 pg. 49)

f Volume Level Indicator

g Battery Indicator (墌 pg. 54)

h Date (墌 pg. 49)

i Selected Medium Indicator (墌 pg. 19, 49)

j Effect Mode Indicator (墌 pg. 36)

k Wipe/Fader Effect Indicator (墌 pg. 37, 50)

During Still Image Playback

a Mode Indicator (墌 pg. 16)

b Folder/File Number

c Slide Show Playback Indicator (墌 pg. 27)

d Battery Indicator (墌 pg. 54)

e Date/Time (墌 pg. 49)

f Selected Medium Indicator (墌 pg. 19, 49)

NOTE:

For the indications on LCD monitor during voice

playback, see page 30.

NOV 10. 2005

11:30AM

NOV 10. 2005

GZ-MC500US.book Page 13 Wednesday, April 13, 2005 7:08 PM

14 EN

GETTING STARTED

MasterPage: Body_Left

This camera’s 2-way power supply system lets

you choose the most appropriate source of

power. Do not use provided power supply units

with other equipment.

Charging the Battery Pack

1 Set the power switch to OFF while pressing

down the lock button located on the switch.

2 Slide and hold OPEN in the direction of the

arrow a, then open the battery/CF card cover.

3 Insert the battery pack firmly into the battery

pack mount until it locks into space as shown in

the illustration.

4 Close the battery/CF card cover firmly until it

locks.

5 Connect the AC adapter to the camera.

6 Plug the AC adapter into an AC outlet. The

power/charge lamp on the camera blinks to

indicate charging has started.

7 When the power/charge lamp goes out,

charging is finished. Unplug the AC adapter from

the AC outlet. Disconnect the AC adapter from

the camera.

To detach the battery pack

Open the battery/CF card cover, and remove the

battery pack while sliding BATTERY in the

direction of the arrow b.

Required charging time

Power

To AC outlet

Power/Charge Lamp

Battery Pack

AC Adapter

Open the cover.

Power Switch

To DC connector

Lock Button

OPEN

Battery/CF Card

Cover

Protrusion

mark

Battery pack Charging time

BN-VM200U (provided) Approx. 1 hr. 35 min.

BATTERY

GZ-MC500US.book Page 14 Wednesday, April 13, 2005 7:08 PM

GETTING STARTED

EN 15

GETTING STARTED

MasterPage: Start_Right

NOTES:

● Charging times are for a fully discharged battery

pack.

● When the battery/CF card cover is opened or the

SD card is removed while the power is on, the

power is automatically turned off to protect the

data in the recording medium. To turn on the

power again after opening the battery/CF card

cover, close the cover. To turn on the power again

after removing the SD card, close the cover and

set the power switch to OFF, then to or .

● It is recommended that only genuine JVC

batteries are used in this camera. Using generic

non-JVC batteries can cause damage to the

internal charging circuitry.

● If the protective cap is attached to the battery

pack, remove it first.

● When charging the battery pack for the first time

or after a long storage period, the power/charge

lamp may not light. In this case, remove the

battery pack from the camera, then try charging

again.

● If the battery operation time remains extremely

short even after having been fully charged, the

battery is worn out and needs to be replaced.

Please purchase a new one.

● Using the optional AA-V200 battery charger, you

can charge the BN-VM200U battery pack without

the camera.

● Since the AC adapter processes electricity

internally, it becomes warm during use. Be sure to

use it only in well-ventilated areas.

Using the Battery Pack

Perform steps 2 – 4 in “Charging the Battery

Pack”.

Maximum continuous recording time

NOTES:

● Recording time is reduced significantly under the

following conditions:

• Zoom or record-standby mode is engaged

repeatedly.

• Playback mode is engaged repeatedly.

● Before extended use, it is recommended that you

prepare enough battery packs to cover 3 times the

planned recording time.

Using AC Power

Connect the AC adapter to the camera.

NOTE:

The provided AC adapter features automatic voltage

selection in the AC range from 110 V to 240 V.

A

TTENTION:

● Before detaching the power source, make sure

that the camera’s power is turned off. Failure to do

so can result in a camera malfunction.

● If the camera is a subject to electrostatic

discharge, turn the power off before using it again.

About Batteries

DANGER! Do not attempt to take the batteries

apart, or expose them to flame or excessive

heat, as it may cause a fire or explosion.

WARNING! Do not allow the battery or its

terminals to come in contact with metals, as this

can result in a short circuit and possibly start a

fire.

The Benefits of Lithium-Ion Batteries

Lithium-ion battery packs are small but have a

large power capacity. However, when one is

exposed to cold temperatures (below 10°C/

50°F), its usage time becomes shorter and it

may cease to function. If this happens, place the

battery pack in your pocket or other warm,

protected place for a short time, then re-attach it

to the camera.

Battery pack Recording time

BN-VM200U (provided) 1 hr.

AC Adapter

To AC outlet

To DC

connector

Open the cover.

mark

GZ-MC500US.book Page 15 Wednesday, April 13, 2005 7:08 PM

16 EN

GETTING STARTED

MasterPage: Body_Left

To turn on the camera, set the power switch to

or while pressing down the lock button

located on the switch.

● The power/charge lamp turns on.

To turn off the camera, set the power switch to

OFF.

Set the appropriate operation mode according to

your preference using the power switch, MODE

button and the recording mode dial.

1 Power Switch Position

Set the power switch for recording ( ) or

playback ( ) while pressing down the lock

button.

2 Recording/Playback Mode

Press MODE to select the recording/playback

mode.

The selected mode lamp lights up.

: Video mode (墌 pg. 20, 22)

: Still image mode (墌 pg. 25, 27)

: Voice mode (墌 pg. 29, 30)

● To select the voice mode, press and hold

MODE.

3 Auto/Manual Mode

Set the recording mode dial to the desired

position to switch the auto/manual recording

mode. The indicator or appears on the

LCD monitor. (墌 pg. 12)

The language on the display can be changed.

(墌 pg. 48, 49)

1 Set the power switch to or .

2 Press MENU. The menu screen appears.

3 Select [DISPLAY]

with the multi-controller

(r/t), then press 49.

4 Select [LANGUAGE]

with the multi-controller

(r/t), then press 49.

5 Select the desired

language with the multi-

controller (r/t), then

press 49.

6 Press MENU to return to the normal screen.

Operation Mode

Power/Charge Lamp

Power Switch

MODE

Lock Button

Mode Lamp

1

2

3

Power Switch

Playback

Recording

Power Off

Language Setting

Auto mode ( ):

You can record using no special

effects or manual adjustments.

Manual mode (other than ):

Manual recording is possible by

setting various functions.

(墌 pg. 31 – 36)

CAMERA SETTING

BASIC SETTING

MEMORY CARD SETTING

DISPLAY

QUALITY

WIDE MODE

WIND CUT

SCENE COUNTER

LANGUAGE

CLOCK ADJUST

BRIGHT

DATE/TIME

GZ-MC500US.book Page 16 Wednesday, April 13, 2005 7:08 PM

GETTING STARTED

EN 17

GETTING STARTED

MasterPage: Start_Right

The recording start date/time is recorded on the

video/still image/voice file and it can be checked

by pressing INFO during playback.

(墌 pg. 22, 27, 30)

1 Set the power switch to or .

2 Press MENU. The menu screen appears.

3 Select [DISPLAY]

with the multi-controller

(r/t), then press 49.

4 Select [CLOCK

ADJUST] with the multi-

controller (r/t), then

press 49. The month is

highlighted.

5 Input the month with

the multi-controller (r/

t), then press 49.

Repeat to input the day,

year, hour and minute.

6 Press MENU to

return to the normal screen.

Built-in Clock’s Rechargeable Lithium

Battery

If the camera is not used for approx. 3 months,

the clock’s lithium battery will become

discharged and the date/time stored in memory

will be lost. When this occurs, first connect the

camera to an AC outlet using the AC adapter for

over 24 hours to charge the clock’s rechargeable

lithium battery. Then perform the date/time

setting before using the camera.

Note that the camera can be used without

setting the date/time.

You can use a CF card (CompactFlash card) as

a recording medium in the CF slot.

The removable hard disk (provided) or

Microdrive

®

is a type of CF cards. See page 62

for the guaranteed media to work with this

camera.

1 Make sure the camera’s power is off.

2 Slide and hold OPEN in the direction of the

arrow a, then open the battery/CF card cover.

3 When the eject button is pulled out as shown

in the illustration, push it once.

● The button is pushed in.

4 To insert a CF card, firmly insert it as shown

in the illustration.

To remove a CF card, push the eject button

twice.

● The eject button comes out by pushing it once. By

pushing the eject button once again ejects the CF

card.

5 Close the battery/CF card cover firmly until it

locks.

Date/Time Settings

CAMERA SETTING

BASIC SETTING

MEMORY CARD SETTING

DISPLAY

QUALITY

WIDE MODE

WIND CUT

LANGUAGE

CLOCK ADJUST

BRIGHT

DATE/TIME

SCENE COUNTER

CLOCK ADJUST

JAN 31

AM

11 07:

DATE TIME

2005

Inserting/Removing a CF Card

Battery/CF

Card Cover

CF Slot

OPEN

Rear

Eject Button

Front

Terminals

CONTINUED ON NEXT PAGE

GZ-MC500US.book Page 17 Wednesday, April 13, 2005 7:08 PM

18 EN

GETTING STARTED

MasterPage: Body_Left

NOTES:

● Read the cautions on CF card. (墌 pg. 58,

“Recording Medium”)

● Before using the provided removable hard disk or

a new CF card, it is necessary to format it.

(墌 pg. 19)

● When the battery/CF card cover is opened or the

SD card is removed while the power is on, the

power is automatically turned off to protect the

data in the recording medium. To turn on the

power again after opening the battery/CF card

cover, close the cover. To turn on the power again

after removing the SD card, close the cover and

set the power switch to OFF, then to or .

A

TTENTION:

● Do not insert or remove the CF card while the

camera is turned on, as this may cause the CF

card to be corrupted or cause the camera to

become unable to recognize whether or not the

CF card is installed.

● Do not squeeze the external covers of the CF

card.

You can use an SD card as a recording medium

in the SD slot. See page 62 for the guaranteed

media to work with this camera.

1 Make sure the camera’s power is off.

2 Open the SD card cover.

3 To insert an SD card, firmly insert it with its

clipped edge first.

To remove an SD card, push it once. After the

SD card comes out of the camera, pull it out.

● Do not touch the terminal on the reverse side of

the label.

4 Close the SD card cover.

To protect valuable files

Slide the write/erase protection tab on the side

of the SD card in the direction of “LOCK”. This

prevents the SD card from being recorded over.

To record on this SD card, slide the tab back to

the position opposite to “LOCK” before inserting

it.

NOTE:

Before using a new SD card, it is necessary to

format the card. (墌 pg. 19)

A

TTENTION:

Do not insert or remove the SD card while the

camera is turned on, as this may cause the SD card

to be corrupted or cause the camera to become

unable to recognize whether or not the SD card is

installed.

Inserting/Removing an SD Card

SD card (optional)

Clipped edge

SD Card Cover

Label

Write/Erase

Protection Tab

SD Slot

GZ-MC500US.book Page 18 Wednesday, April 13, 2005 7:08 PM

GETTING STARTED

EN 19

GETTING STARTED

MasterPage: Start_Right

You can format (initialize) a recording medium in

the CF or SD slot. You have to format the

provided removable hard disk or newly-

purchased CF cards and SD cards with this

camera before using them. This enables stable

speeds and operation when accessing the

recording medium. Be aware that all files and

data including protected files will be erased.

(墌 pg. 39)

1 Set the power switch to or .

2 Press MENU. The menu screen appears.

3 Select [MEMORY

CARD SETTING] with

the multi-controller (r/

t), then press 49.

4 Select [FORMAT] with

the multi-controller (r/

t), then press 49.

5 Select [CF SLOT] or

[SD SLOT] with the multi-

controller (r/t), then

press 49.

6 Select [EXECUTE] with the multi-controller

(r/t), then press 49.

● To cancel the formatting, select [CANCEL], then

press 49.

CAUTION:

Do not remove the recording medium or perform

any other operation (such as turning off the power)

during format. Also, be sure to use the provided AC

adapter, as the recording medium may be corrupted

if the battery becomes exhausted during format. If

the recording medium becomes corrupted, format it

again.

NOTE:

Do not format the recording medium on the PC.

Make sure to format the recording medium on the

camera.

Select the recording medium before starting

recording or playback. (墌 pg. 48, 49)

Example: When recording still images to an SD

card

1 Set the power switch to .

2 Press MENU. The menu screen appears.

3 Select [MEMORY

CARD SETTING] with

the multi-controller (r/

t), then press 49.

4 Select [IMAGE

MODE] with the multi-

controller (r/t), then

press 49.

5 Select [SD SLOT] with

the multi-controller (r/

t), then press 49.

6 Press MENU to return to the normal screen.

Formatting a Recording Medium

DIS

CAMERA SETTING

BASIC SETTING

MEMORY CARD SETTING

DISPLAY

QUALITY

WIDE MODE

VIDEO MODE

IMAGE MODE

VOICE MODE

FORMAT

CLEAN UP

COPY/MOVE

NO. RESET

Selecting Recording Medium

DIS

CAMERA SETTING

BASIC SETTING

MEMORY CARD SETTING

DISPLAY

QUALITY

WIDE MODE

COPY/MOVE

NO. RESET

VIDEO MODE

IMAGE MODE

VOICE MODE

FORMAT

CLEAN UP

GZ-MC500US.book Page 19 Wednesday, April 13, 2005 7:08 PM

20 EN

MasterPage: Heading0_Left

VIDEO RECORDING & PLAYBACK

1 Set the power switch to .

2 Press MODE to select .

● The camera is programmed to record videos on

the medium in the CF slot by the factory-preset.

To switch the recording medium, see pages 19, 48

and 49.

● To change the picture quality, see pages 48 and

50.

3 Press the recording start/stop button to start

recording.

● Approximate remaining time

for recording appears on

the display.

4 To stop recording, press

the recording start/stop button again.

NOTES:

● If the camera is left without any operation during

recording or playback (video, still image or voice)

for 5 minutes when using the battery pack, the

camera is turned off automatically to conserve

power. To turn the camera on again, set the power

switch to OFF, then to or . When using the

AC adapter, the camera enters the sleep mode

(the access lamp lights and the LCD monitor turns

off). To cancel the sleep mode, perform any

operation such as zooming.

● When the camera heats up, the 7REC indicator

flashes. If the camera continues to heat up,

shooting may be stopped to protect the recording

medium. In this case, turn off the camera power,

and then wait until the camera cools down.

(墌 pg. 55)

● When shooting continuously, shooting is

automatically stopped when a file size of 4 GB is

reached.

● If data cannot be recorded or saved properly, the

video files are not saved to the [SD_VIDEO] folder

for regular video. Instead, the files are saved to

the [EXTMOV] folder. To play back these files, see

“To play back files in the [EXTMOV] folder”

(墌 pg. 22).

● There may be differences in the brightness

between the recorded video and still image, even

if the same subject is shot.

● Video file names are assigned as sequential

hexadecimal numbers.

● To turn the operation sounds off, see page 48.

● For approximate recording time, see page 62.

Video Recording

Power Switch

Recording Start/

Stop Button

Zoom Lever

MODE

Lock Button

[0h56m]

GZ-MC500US.book Page 20 Wednesday, April 13, 2005 7:08 PM

La pagina si sta caricando...

JVC GZ-MC500U Istruzioni per l'uso

JVC GZ-MC500U Istruzioni per l'uso

in altre lingue

Documenti correlati

Altri documenti