Moog Videolarm SView PFD7TN-3 Manuale utente

Marca: Moog Videolarm

Modello: SView PFD7TN-3

Categoria: Accessori per telecamere di sicurezza

Tipo: Manuale utente

www.videolarm.com

PFD7CN-3

SView™ Outdoor Pressurized FusionDome

Installation and Operation Instructions for the following models:

PFD7CN-3 IP Network Ready 7” Pressurized Outdoor PTZ

Camera System with 36x zoom compression, full D1.

Clear dome, with 24Vac input, heater/ blower

PFD7CS-3 (Analog version)

IP Network Ready 7” Pressurized Outdoor PTZ Camera

System with 36x zoom compression, full D1. Clear dome,

with 24Vac input, heater/ blower

Before attempting to connect or operate this product, please read these

instructions completely. To be used with the 81-IN5409 Instruction Manual.

CERTIFIED

81-IN5382

01-15-2009

IMPORTANT SAFEGUARDS SAFETY PRECAUTIONS

UNPACKING

SERVICE

1 Read these instructions.

2 Keep these instructions.

3 Heed all warnings

4 Follow all instructions.

5 Do not use this apparatus near water.

6 Clean only with damp cloth.

7 Do not block any of the ventilation openings. Install in accordance with the

manufacturers instructions.

8 Cable Runs- All cable runs must be within permissible distance.

9 Mounting - This unit must be properly and securely mounted to a supporting

structure capable of sustaining the weight of the unit.

Accordingly:

a. The installation should be made by a qualified installer.

b. The installation should be in compliance with local codes.

c. Care should be exercised to select suitable hardware to install the unit, taking into

account both the composition of the mounting surface and the weight of the

unit.

10 Do not install near any heat sources such as radiators, heat registers, stoves, or other

apparatus ( including amplifiers) that produce heat.

11 Do not defeat the safety purpose of the polarized or grounding-type plug. A

polarized plug has two blades with one wider than the other. A grounding type

plug has two blades and a third grounding prong. The wide blade or the third

prong are provided for your safety. When the provided plug does not fit into your

outlet, consult an electrician for replacement of the obsolete outlet.

12 Protect the power cord from being walked on or pinched particularly at plugs,

convenience receptacles, and the point where they exit from the apparatus.

13 Only use attachment/ accessories specified by the manufacturer.

14 Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer,

or sold with the apparatus. When a cart is used, use caution when moving the cart/

apparatus combination to avoid injury from tip-over.

15 Unplug this apparatus during lighting storms or when unused for long periods of time.

16 Refer all servicing to qualified service personnel. Servicing is required when the

apparatus has been damaged in any way, such as power-supply cord or plug is

damaged, liquid has been spilled of objects have fallen into the apparatus, the

apparatus has been exposed to rain or moisture, does not operate normally, or

has been dropped.

Be sure to periodically examine the unit and the supporting structure to make sure that the

integrity of the installation is intact. Failure to comply with the foregoing could result in the

unit separating from the support structure and falling, with resultant damages or injury to

anyone or anything struck by the falling unit.

Unpack carefully. Electronic components can be

damaged if improperly handled or dropped. If an item

appears to have been damaged in shipment, replace

it properly in its carton and notify the shipper.

Be sure to save:

1 The shipping carton and packaging material.

They are the safest material in which to make

future shipments of the equipment.

2 These Installation and Operating Instructions.

If technical support or service is needed, contact us

at the following number:

The lightning flash with an arrowhead

symbol, within an equilateral triangle, is

intended to alert the user to the presence

of non-insulated “dangerous voltage”

within the product’s enclosure that may be

of sufficient magnitude to constitute a risk

to persons.

Este símbolo se piensa para alertar al usuario a la

presencia del “voltaje peligroso no-aisIado” dentro del

recinto de los productos que puede ser un riesgo de

choque eléctrico.

Ce symbole est prévu pour alerter I’utilisateur à la

presence “de la tension dangereuse” non-isolée dans la

clôture de produits qui peut être un risque de choc

électrique.

Dieses Symbol soll den Benutzer zum Vorhandensein der

nicht-lsolier “Gefährdungsspannung” innerhalb der

Produkteinschließung alarmieren die eine Gefahr des

elektrischen Schlages sein kann.

Este símbolo é pretendido alertar o usuário à presença

“di tensão perigosa non-isolada” dentro do cerco dos

produtos que pode ser um risco de choque elétrico.

Questo simbolo è inteso per avvertire I’utente alla

presenza “di tensione pericolosa” non-isolata all’interno

della recinzione dei prodotti che può essere un rischio di

scossa elettrica

The exclamation point within an equilateral

triangle is intended to alert the user to

presence of important operating and

maintenance (servicing) instructions in the

literature accompanying the appliance.

Este símbolo del punto del exclamation se piensa para

alertar al usuario a la presencia de instrucciones

importantes en la literatura que acompaña la

aplicación.

Ce symbole de point d’exclamation est prévu pour

alerter l’utilisateur à la presence des instructions

importantes dans la littérature accompagnant

l’appareil.

Dieses Ausruf Punktsymbol soll den Benutzer zum

Vorhandensein de wichtigen Anweisungen in der

Literatur alarmieren, die das Gerät begleitet.

Este símbolo do ponto do exclamation é pretendido

alertar o usuário à presença de instruções importantes

na literatura que acompanha o dispositivo.

Questo simbolo del punto del exclamaton è inteso per

avvertire l’utente alla presenza delle istruzioni importanti

nella letteratura che accompagna l'apparecchio.

TECHNICAL SUPPORT

AVAILABLE 24 HOURS

1- 800 - 554 -1124

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION

CAUTION: TO REDUCE THE RISK OF

ELECTRIC SHOCK, DO NOT REMOVE

COVER ( OR BACK). NO USER- SERVICE-

ABLE PARTS INSIDE. REFER SEVICING TO

QUALIFIED SERVICE PERSONNEL.

LIMITEDWARRANTY FOR VIDEOLARM INC. PRODUCTS

VIDEOLARMINC. warrantsthis Productto be free from defectsin materialor workmanship,as follows:

PRODUCTCATEGORY PARTS LABOR

All Enclosures and Electronics Five (5) Years Five (5) Years

Pan/Tilts Three (3) Years **6 months if used in autoscan Three (3) Years **6 months if used in autoscan

Poles/PoleEvators Three (3) Years Three (3) Years

Warrior/Q-View/I.R. Illuminators Five (5) Years Five (5) Years

Controllers Five (5) Years Five (5) Years

Power Supplies Five (5) Years Five (5) Years

Accessory Brackets Five (5) Years Five (5) Years

During the labor warranty period, to repair the Product, Purchaser will either return the defective product, freight prepaid, or deliver it to Videolarm Inc.

Decatur GA. The Product to be repaired is to be returned in either its original carton or a similar package

an equal degree of protection with a

RMA # (Return Materials Authorization number) displayed on the outer box or packing slip. To obtain a RMA# you must contact our Technical Support

Team at 800.554.1124, extension 101. Videolarm will return the repaired Product freight prepaid to Purchaser. Videolarm is not obligated to provide

Purchaser with a substitute unit during the warranty period or at any time. After the applicable warranty period, Purchaser must pay all labor and/or

parts charges.

1.NOTIFICATIONOF CLAIMS: WARRANTYSERVICE: If Purchaser believes that the Product is defective in material or workmanship, then written notice

with an explanation of the claim shall be given promptly by Purchaser to Videolarm but all claims for warranty service must be made within the

warranty period. If after investigation Videolarm determines that the reported problem was not covered by the warranty, Purchaser shall p

ay Videolarm

for the cost of investigating the problem at its then prevailing per incident billable rate. No repair or replacement of any Product or part thereof shall

extend the warranty period as to the entire Product. The

warranty on the repaired part only shall be in for a period of ninety (90) days

following the repair or replacement of that part or the remaining period of the Product parts warranty, whichever is greater.

2.EXCLUSIVE REMEDY: ACCEPTANCE:Purchaser’s exclusive remedy and Videolarm’s sole obligation is to supply (or pay for) all labor necessary to repair

any Product found to be defective within the warranty period and to supply, at no extra charge, new or rebuilt replacements for defective parts.

3.EXCEPTIONS TO LIMITED WARRANTY: Videolarm shall have no liability or obligation to Purchaser with respect to any Product requiring service

during the warranty period which is subjected to any of the following: abuse, improper use: negligence, accident, lightning damage or other acts

of God (i.e., hurricanes, earthquakes),

failure of the end-user to follow the directions outlined in the product instructions, failure of the

end-user to follow the maintenance procedures recommended by the International Security Industry Organization, written in product instructions,

or recommended in the service manual for the Product. Furthermore, Videolarm shall have no liability where a schedule is

for regular

replacement or maintenance or cleaning of certain parts (based on usage) and the end-user has failed to follow such schedule; attempted repair by

personnel; operation of the Product outside of the published environmental and electrical parameters, or if such Product’s original

(trademark, serial number) markings have been defaced, altered, or removed. Videolarm excludes from warranty coverage Products sold

AS IS and/or WITH ALL FAULTS and excludes used Products which have not been sold by Videolarm to the Purchaser. All software and accompanying

documentation furnished with, or as part of the Product is furnished “AS IS”(i.e., without any warranty of any kind), except where expressly provided

otherwise in any documentation or license agreement furnished with the Product.

4.PROOF OF PURCHASE:The Purchaser’s dated bill of sale must be retained as evidence of the date of purchase and to establish warranty eligibility.

DISCLAIMEROF WARRANTY

EXCEPT FOR THE FOREGOING WARRANTIES, VIDEOLARM HEREBY DISCLAIMS AND EXCLUDES ALL OTHER WARRANTIES, EXPRESS OR IMPLIED,

INCLUDING, BUT NOT LIMITED TO ANY AND/OR ALL IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND/OR ANY WARRANTY WITH

REGARD TO ANY CLAIM OF INFRINGEMENT THAT MAY BE PROVIDED IN SECTION 2-312(3) OF THE UNIFORM COMME

RCIAL CODE AND/OR IN ANY OTHER COMPARABLE

STATE STATUTE. VIDEOLARM HEREBY DISCLAIMS ANY REPRESENTATIONS OR WARRANTY THAT THE PRODUCT IS COMPATIBLE WITH ANY COMBINATION OF NON-VIDEOLARM

PRODUCTS OR NON-VIDEOLARM RECOMMENDED PRODUCTS PURCHASER CHOOSES TO CONNECT TO PRODUCT.

LIMITATION OF LIABILITY

THE LIABILITY OF VIDEOLARM, IF ANY, AND PURCHASER’S SOLE AND EXCLUSIVE REMEDY FOR DAMAGES FOR ANY CLAIM OF ANY KIND

WHATSOEVER, REGARDLESS OF THE LEGAL THEORY AND WHETHER ARISING IN TORT OR CONTRACT, SHALL NOT BE GREATER THAN THE ACTUAL PURCHASE PRICE OF THE

PRODUCT WITH RESPECT TO WHICH SUCH CLAIM IS MADE. IN NO EVENT SHALL VIDEOLARM BE LIABLE TO PURCHASER FOR ANY SPECIAL, INDIRECT, INCIDENTAL, OR

CONSEQUENTIAL DAMAGES OF ANY KIND INCLUDING, BUT NOT LIMITED TO, COMPENSATION, REIMBURSEMENT OR DAMAGES ON ACCOUNT OF THE LOSS OF PRESENT

OR PROSPECTIVE PROFITS OR FOR ANY OTHER REASON WHATSOEVER.

/tour operation

**6 months if used in autoscan

/tour operation

**6 months if used in autoscan

/tour operation

SView Series Five (5) Years

Five (5) Years

The limited warranty stated in these product instructions is subject to all of the following terms and conditions:

TERMS AND CONDITIONS

24 VAC

3.3 Amps

Total Power: 80 Watts

Accessories: Heater: 50 Watts/Blower: 2 Watts

Camera Power: 28 Watts

Tools Required: .100” Flat Head Screwdriver

Phillips Head Screwdriver

7/16” Wrench or Socket

24 VAC

3.3 amperios

Energía Total: 80 vatios

Accesorios: Calentador: 50 Watts/Blower: 2 vatio

Energía De la Cámara fotográfica: 28 vatios

Las Herramientas Requirieron: Destornillador Principal Plano Del 100"

Destornillador Principal Phillips

24 VCA

3.3 ampères

Puissance Totale : 80 watts

Accessoires : Réchauffeur : 50 Watts/Blower : 2 watts

Puissance D'Appareil-photo : 28 watts

Les Outils besoin : Tournevis Principal Plat De 100"

Tournevis Principal Phillips

24 VAC

3.3 Ampere

Gesamtenergie: 80 Watt

Zusatzgeräte: Heizung: 50 Watt/Blower: 2 Watt

Kamera-Energie: 28 Watt

Werkzeuge Erforderten: 100"Flacher Hauptschraubenzieher

Kreuzkopfhauptschraubenzieher

24 VAC

3.3 ampères

Poder Total: 80 watts

Acessórios: Calefator: 50 Watts/Blower: 2 watt

Poder Da Câmera: 28 watt

As Ferramentas Requereram: Chave de fenda Principal Lisa Do 100"

Chave de fenda Principal Phillips

24 VAC

3.3 ampère

Alimentazione Totale: 80 watt

Accessori: Riscaldatore: 50 Watts/Blower: 2 watt

Alimentazione Della Macchina fotografica: 28 watt

Attrezzi Richiesti: Cacciavite Capo Piano Del 100"

Cacciavite Capo "phillips"

Electrical Specifications

Power 24VAC

Class 2 Only

PFD7CN-9

PFD7CS-9

Français

Deutsch

Italiano

Portuguese

Español

English

Contents of Box

*** Pan Tilt boxed separately along with its instructions.

Securely mount bracket to wall. Pull wiring

through bracket and position grommet as shown.

• Con seguridad soporte del montaje a emparedar. Tire del cableado

a través del soporte y del ojal de la posición según lo demostrado.

• Solidement parenthèse de bâti à murer. Tirez le câblage par la

parenthèse et le canon isolant de position comme montré.

• Sicher Einfassung Haltewinkel wall. Ziehen Sie Verdrahtung durch

Haltewinkel und Position Gummimuffe, wie gezeigt.

• Firmemente suporte da montagem a wall. Puxe a fiação através do

suporte e do ilhó da posição como mostrado.

• Saldamente staffa del supporto da wall. Tiri i collegamenti tramite la

staffa ed il gommino di protezione di posizione come indicato.

Screw the (2) bolts into the coupling.

• Atornille (2) los pernos en el acoplador.

• Vissez (2) les boulons dans l'accouplement.

• Schrauben Sie die (2) Schraubbolzen in die Koppe-

lung.

• Parafuse (2) os parafusos no acoplamento.

• Avviti (2) i bulloni nell'accoppiamento.

Wrap Teflon tape around the pipe threads

to ensure a tight seal.

• La cinta del Teflon del abrigo alrededor de la pipa rosca

para asegurar un sello apretado.

• La bande de teflon d'enveloppe autour de la pipe filète

pour assurer un joint serré.

• Verpackung Teflonklebeband um das Rohr verlegt, um

eine feste Dichtung sicherzustellen.

• A fita adesiva do Teflon do envoltório em torno da

tubulação enfía para assegurar um selo apertado.

• Il nastro del Teflon dell'involucro intorno al tubo filetta per

accertare una guarnizione stretta.

Screw the coupling onto the pipe threads

until it is hand tight.

• Atornille el acoplador sobre los hilos de rosca de la pipa

hasta que es mano firmemente.

• Vissez le couplage sur les fils de pipe jusqu'à ce que ce

soit main fortement.

• Schrauben Sie die Koppelung auf die Rohrgewinde, bis

es Hand fest ist.

• Parafuse o acoplamento nas linhas da tubulação até

que esteja mão firmemente.

• Avviti l'accoppiamento sui filetti del tubo fino a che non

sia fortemente mano.

SOLD SEPARATELY

Loop the lanyard over the set screw to

temporarily hold housing.

• Coloque el acollador sobre el tornillo de presión para

celebrar temporalmente la cubierta.

• Faites une boucle la lanière au-dessus de la vis de réglage

pour tenir temporairement le logement.

• Schlingen Sie die Abzuglinie über der Klemmschraube, um

Gehäuse vorübergehend zu halten.

• Dê laços no colhedor sobre o parafuso de fixação para

prender temporariamente a carcaça.

• Colleghi la cordicella in circuito sopra la vite di arresto

temporaneamente per tenere l'alloggiamento.

Make the appropriate wiring connections

from the dome to the gooseneck.

• Haga las conexiones apropiadas del cableado de la bóveda

al gooseneck.

• Établissez les rapports appropriés de câblage à partir du dôme

au col de cygne.

• Stellen Sie die passenden Verdrahtung Beziehungen von der

Haube zum gooseneck her.

• Faça as conexões apropriadas da fiação da abóbada ao

gooseneck.

• Faccia i collegamenti adatti dei collegamenti dalla cupola al

gooseneck.

Undo the lanyard, pull housing up and twist

secure with the locking bolt and washers.

• Deshaga el acollador, tire de contener para arriba y tuerza seguro

con el perno y las arandelas de fijación.

• Défaites la lanière, tirez loger vers le haut et tordez bloqué avec le

boulon et les rondelles de fermeture.

• Annulieren Sie die Abzuglinie, ziehen Sie oben unterbringen und

verdrehen Sie sicheres mit dem verriegelnschraubbolzen und den

Unterlegscheiben.

• Undo o colhedor, puxe abrigar acima e torça seguro com o

parafuso e as arruelas travando.

• Undo la cordicella, tiri l'alloggio in su e torca sicuro con il bullone e

le rondelle di bloccaggio.

Slide the grommet down over the coupling to prevent

water from entering and complete the assembly.

• Resbale el ojal abajo sobre el acoplador para evitar que el agua

entre y para terminar a la asamblea.

• Glissez le canon isolant vers le bas au-dessus de l'accouplement

pour empêcher l'eau d'entrer et pour accomplir l'assemblée.

• Schieben Sie die Gummimuffe unten über der Koppelung, um zu

verhindern, daß Wasser und die Versammlung durchzuführen

hereinkommt.

• Deslize o ilhó para baixo sobre o acoplamento para impedir que a

água entre e para terminar o conjunto.

• Faccia scorrere il gommino di protezione giù sopra l'accoppiamento

per impedire l'acqua entrare e per completare il complessivo.

SOLD SEPARATELY

RJ45

24VAC

Camera/Heater/Blower

Yellow

Green

SNC-RZ50/SNC-RZ30

28 Watts

52 Watts

1/0

Alarm 1

Common

Blue

Violet

Wire as shown below for IP

models:(PFD7CN-9; PFD7TN-9)

Make the appropriate male and female connec-

tions. Indoor model does not include pre-run cables.

• Haga las conexiones masculinas y femeninas apropiadas. El

modelo de interior no incluye pre-funciona los cables.

• Établissez les rapports masculins et femelles appropriés. Le

modèle d'intérieur n'inclut pas pré-courent des câbles.

• Stellen Sie die passenden männlichen und weiblichen

Beziehungen her. Innenmodell schließt nicht vor-laufen lassen

Kabel ein.

• Faça as conexões masculinas e fêmeas apropriadas. O

modelo indoor não inclui pre-funciona cabos.

• Faccia i collegamenti maschii e femminili adatti. Il modello

dell'interno non include pre-fa funzionare i cavi.

AWG

,5 ,75 1,0 1,5 2,5 4 6

22 20 18 16 14 12 10

The beam angle may be adjusted on the

bottom of the unit.

• Éstos se recomiendan las distancias máximas para

24VAC con una gota del voltage del 10%.

• Ceux-ci sont recommandés des distances maximum

pour 24VAC avec une chute de tension de 10%.

• Diese werden maximale Abstände für 24VAC mit

einem 10% Spannungsabfall empfohlen.

• Estes são recomendados distâncias máximas para

24VAC com uma queda de tensão de 10%.

• Questi sono suggeriti distanze massime per 24VAC

con una differenza de potenziale di 10%.

These are recommended maximum distances

for 24VAC with a 10% voltage drop.

Remove Pan/Tilt from shipping carton.

Install in base bracket in housing.

• Quite Pan/Tilt del cartón del envío. Instale en soporte

bajo en la cubierta.

• Enlevez Pan/Tilt du carton d'expédition. Installez dans

la parenthèse basse dans le logement.

• Entfernen Sie Pan/Tilt vom Verschiffenkarton. Bringen

Sie in niedrigen Haltewinkel im Gehäuse an.

• Remova Pan/Tilt da caixa do transporte. Instale no

suporte baixo na carcaça.

• Rimuova Pan/Tilt dalla scatola di trasporto. Installi in

staffa bassa in alloggiamento.

RJ45

24VAC

Camera/Heater/Blower

Yellow

Green

SNC-RZ50/SNC-RZ30

13 Watts

52 Watts

1/0

RS-485RX A

RS-485RX B

RS-485TX A

RS-485TX B

Blue

Violet

Gray

White

Make the appropriate male and female connec-

tions. Indoor model does not include pre-run cables.

• Haga las conexiones masculinas y femeninas apropiadas. El

modelo de interior no incluye pre-funciona los cables.

• Établissez les rapports masculins et femelles appropriés. Le

modèle d'intérieur n'inclut pas pré-courent des câbles.

• Stellen Sie die passenden männlichen und weiblichen

Beziehungen her. Innenmodell schließt nicht vor-laufen lassen

Kabel ein.

• Faça as conexões masculinas e fêmeas apropriadas. O

modelo indoor não inclui pre-funciona cabos.

• Faccia i collegamenti maschii e femminili adatti. Il modello

dell'interno non include pre-fa funzionare i cavi.

Wire as shown below for analog

models: (PFD7CS-9; PFD7TS-9)

To install the dome align the tabs and twist

counter clockwise to secure.

• Para instalar la bóveda alinee las lengüetas y tuerza al revés

a la derecha para asegurar.

• Pour installer le dôme alignez les étiquettes et tordez contre

dans le sens des aiguilles d'une montre pour fixer.

• Um die Haube anzubringen richten Sie die Vorsprünge aus

und verdrehen Sie sich entgegengesetzt nach rechts um zu

sichern.

• Para instalar a abóbada alinhe as abas e torça-as contra no

sentido horário para fixar-se.

• Per installare la cupola allinei le linguette e torca contro in

senso orario per fissare.

Hand tighten the screws on the dome.

Recommended torque 12 inches/lb (1.35Nm).

• La mano aprieta los tornillos en la bóveda. Esfuerzo de

torsión recomendado 12 inches/lb (el 1.35Nm).

• La main serrent les vis sur le dôme. Couple recom-

mandé 12 inches/lb (1.35Nm).

• Hand ziehen die Schrauben an der Haube fest.

Empfohlene Drehkraft 12 inches/lb (1.35Nm).

• A mão aperta os parafusos na abóbada. Torque

recomendado 12 inches/lb (1.35Nm).

• La mano stringe le viti sulla cupola. Coppia di torsione

suggerita 12 inches/lb (1.35Nm).

When pressurizing unit be sure to set the

guage or regulator from 10-20psi (.7-1.4bar).

• Al presurizar la unidad sea seguro fijar la medida o el

regulador de 10-20psi (7-1.4bar).

• En pressurisant l'unité soyez sûr de placer la jauge ou le

régulateur de 10-20psi (7-1.4bar).

• Wenn Sie Maßeinheit unter Druck setzen, seien Sie sicher,

das Eichmaß oder den Regler von 10-20psi (7-1.4bar)

einzustellen.

• Ao pressurizar a unidade seja certo ajustar o guage ou o

regulador de 10-20psi (7-1.4bar).

• Nel pressurizzare l'unità sia sicuro regolare il misuratore o

il regolatore da 10-20psi (7-1.4bar).

PSI

100

150

200

250

300

Nitrogen

Tank

Hose

Regulator

Air Chuck

580

Fitting

CAPTIVE SCREW

To secure in place, tighten captive screw.

• Para asegurar en lugar, apriete el tornillo prisionero.

• Pour fixer en place, serrez la vis captive.

• Um im Platz zu sichern, ziehen Sie Sicherheitsschraube

fest.

• Para fixar-se no lugar, aperte o parafuso prisioneiro.

• Per fissare sul posto, stringa la vite prigioniera.

Place the air chuck on the tank valve and

begin filling until pressure relief valve opens.

• Coloque la tirada del aire en la válvula del tanque y comience

a llenar hasta que la válvula de descarga de presión se abre.

• Placez le mandrin d'air sur la valve de réservoir et commencez

à remplir jusqu'à ce que la valve de décompression s'ouvre.

• Setzen Sie die Luftklemme auf das Behälterventil und fangen Sie

an zu füllen, bis Druckablaßventil sich öffnet.

• Coloque o mandril do ar na válvula do tanque e comece a

encher-se até que a válvula de escape de pressão abra.

• Disponga il mandrino dell'aria sulla valvola del carro armato e

cominci a riempirsi fino a che la valvola limitatrice della

pressione non si apra.

Air Chuck

Tank

Valve

Open the relief valve. Drain all air from the housing and

repeat twice to remove all moisture.

• Abra la válvula de descarga. Drene todo el aire de la cubierta y

de la repetición dos veces para quitar toda la humedad.

• Ouvrez la soupape de sécurité. Évacuez tout l'air le logement et la

répétition deux fois pour enlever toute l'humidité.

• Öffnen Sie das Sicherheitsventil. Lassen Sie alle Luft aus dem

Gehäuse und der Wiederholung zweimal ab, um alle Feuchtigkeit

zu entfernen.

• Abra a válvula de escape. Drene todo o ar da carcaça e do

repeat duas vezes para remover toda a umidade.

• Apra la valvola di sfiato. Vuoti due volte tutta l'aria

dall'alloggiamento e dalla ripetizione per rimuovere tutta l'umidità.

The beam angle may be adjusted on the

bottom of the unit.

• Energía encima de la unidad.

• Puissance vers le haut de l'unité.

• Energie herauf die Maßeinheit.

• Poder acima da unidade.

• Alimentazione sull'unità.

Power up the unit.

After purging check the housing pressure. It

should be around 5psi (.34bar).

• Después de purgar el cheque la presión de la cubierta.

Debe estar alrededor de 5psi (34bar).

• Après la purge du contrôle la pression de logement. Elle

devrait être autour de 5psi (34bar).

• Nachdem Überprüfung der Gehäusedruck bereinigt

worden ist. Sie sollte um 5psi (34bar) sein.

• Após ter removido a verificação a pressão da carcaça.

Deve ser em torno de 5psi (34bar).

• Dopo l'eliminazione dell'inceppo del controllo la pressione

dell'alloggiamento. Dovrebbe essere intorno a 5psi

(34bar).

PSI

PRESSURIZED HOUSING

Replacement Parts List

Part No. Description

1 RPPFDT02 Housing Top (Extended)

2 RPVL1938 Removable Pendent Coupling

3 RPVL1802 Plastic Rain Shroud

4 RPVL1795 Tank Valve Gasket

5 RP96RSORG11 Main O-Ring 9.25"

6 RPPFDTR01 Trim Ring w/o Dome

7 RCPFD7 Clear Dome with sealing O-Ring

7b RCTPFD7 Tinted Dome with sealing O-Ring

8 RPPFDT03 Internal Sealing Bracket Assembly

9 RP96RSORG10 Small O-Ring 4.5"

10 RP70PT07a Hermetic Connector, Gasket, Cable

11 RP95VALV08 5 to 7 psi Pressure Relief Valve

12 RP95VALV07 Tank Valve

13 RPFD072 24VAC Heater

14 RP46PKH3063 Spacers Packet

15 RPFD050 Connection PCB

16 RPFD060 Main Bracket Assembly

17 RPFD080 Blower

N/S RP40CAPPFD811 External Input Video/Power Cables

N/S RP46PKH2200 Packet Assembly-Hardware

N/S RP46PKE1100 Packet Assembly-Electrical

18 RPVL2857 P/T Base Bracket

19 RP76v385A P/T Connection Card

(Network Models Only)

20 RPVL3097 IP Card Bracket

21 RP70p14015 IP Card

22 RP96PSGK08 P/T Grommet (2)

23 RP76P0F060E IP Connection Card

(Network Models Only)

N/S WM20G GOOSE NECK (SOLD SEPARATELY

)

Product Registration/Warranty

Thank you for choosing Videolarm. We value your patronage and are solely committed to

providing you with only the highest quality products available with unmatched customer service

levels that are second-to-none in the security industry.

Should a problem arise, rest assure that Videolarm stands behind its products

by offering some of the most impressive warranty plans available: 3 Years

on all Housings, Poles, Power Supplies, and Accessories and 5 Years on

all camera systems (SView, QView, Warriors), and InfraRed Illuminators.

Option 1: Online Option 2: Mail-In

Take a few moments and validate your purchase with our Online Product Registration Form

www.videolarm.com/productregistration.jsp

or complete and mail-in the bottom portion of this ﬂyer.

Simple and Trouble-Free RMA process•

Added into customer database to receive product updates / news•

Eliminate the need to archive original purchase documents: •

Receipts, Purchase Orders, etc…

Main Contact Info

First Name: Last Name:

Professional Title: Company:

Address 1: Address 2:

City: State / Province/Country:

Zip / Postal Code: Phone Number: E-mail Address:

Product Information

Please Circle One: Business Personal

Name & Location of Company / Store where Purchased:

(City, State, Country)

Videolarm Product ID Product Description

Serial #

(Available only for Camera Systems, IR Illuminators, Wireless Devices)

PO#

Cut at the dotted Line

Place in envelope, afﬁx stamp and mail to:

Videolarm ATTN: Warranty

2525 Park Central Ave.

Decatur, GA 30035

Moog Videolarm SView PFD7TN-3 Manuale utente

Marca: Moog Videolarm

Modello: SView PFD7TN-3

Categoria: Accessori per telecamere di sicurezza

Tipo: Manuale utente

Scarica il pdf

rapporto

in altre lingue

English: Moog Videolarm SView PFD7TN-3 User manual

Moog Videolarm SView PFD7TN-3 Manuale utente

Moog Videolarm SView PFD7TN-3 Manuale utente

in altre lingue

Documenti correlati

Altri documenti