Palm GPS 3301 Manuale del proprietario

GPS Navigator

Navigateur GPS

Navegador GPS

GPS 导航器

GPS

導航器

Contents

English. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Deutsch. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Français . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Español . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

Italiano. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61

Português . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73

Nederlands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85

简体中文 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99

繁體中文 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111

Intellectual property notices

Palm, Treo, Palm OS, and the Palm logo are among the trademarks or

registered trademarks owned by or licensed to Palm, Inc. All other

brand and product names are or may be trademarks of, and are used

to identify products or services of, their respective owners.

The TREO trademark is used by Palm in Sweden and Denmark with

the express consent of Pfizer and its affiliated companies. The

products marketed and/or sold by Palm under the TREO trademark

are in no way affiliated with Pfizer or its business.

Varumärket TREO används av Palm i Sverige och Danmark med

uttryckligt tillstånd från Pfizer och dess dotterbolag. De produkter

som marknadsförs och/eller säljs av Palm under varumärket TREO

ska på inget sätt alls kopplas samman med Pfizer eller dess

verksamhet.

TREO-varemærket anvendes af Palm i Danmark og Sverige med

udtrykkelig tilladelse fra Pfizer og Pfizers associerede selskaber. De

produkter, der markedsføres og/eller sælges af Palm under

TREO-varemærket, er på ingen måde tilknyttet Pfizer eller Pfizers

virksomhed.

TomTom and the TomTom logo are registered trademarks of TomTom

International B.V., The Netherlands. All other trademarks are the

property of their respective owners. Our end user license agreement

and a limited warranty apply to this product; they are included in this

package. You can also review both at www.tomtom.com/legal

.

Disclaimer and limitation of liability

Palm, Inc. assumes no responsibility for any damage or loss resulting

from the use of this guide.

Palm, Inc. assumes no responsibility for any loss or claims by third

parties which may arise through the use of this device and any

accompanying or associated software provided by Palm, Inc.

Palm, Inc. assumes no responsibility for any damage or loss caused

by deletion of data as a result of malfunction, dead battery, or repairs.

Be sure to make backup copies of all important data on other media

to protect against data loss.

NOTE Please read the End User Software License Agreement

included with this product before using the accompanying software

program(s). Using any part of the software indicates that you accept

the terms of the End User Software License Agreement.

v 2.0

GETTING STARTED

4

Getting started

The Palm

®

GPS Navigator provides detailed

maps, route planning, and voice navigation.

The GPS Navigator uses TomTom

NAVIGATOR software and maps on your

device. To use Navigator, your device

makes a wireless connection to the

included GPS receiver using Bluetooth

®

wireless technology. The receiver then

transmits information to the NAVIGATOR

software that is displayed on your device

screen.

This guide explains how to set up the

TomTom NAVIGATOR software on your

device. Certain steps for setting up the

NAVIGATOR software are different

depending on whether you have a

compatible device that runs on Palm OS

®

software or a compatible device that runs

on Windows Mobile

®

software.

Compatible Palm OS devices

• Palm

®

Treo

™

650 smartphone

• Palm

®

Treo

™

680 smartphone

• Palm

®

Treo

™

700p smartphone

Compatible Windows Mobile devices

• Palm

®

Treo

™

700w or 700wx

smartphone

• Palm

®

Treo

™

750 or 750v smartphone

For information on setting up the GPS

receiver, see the GPS Navigator Setup

poster included in this package. For more

detailed instructions on using TomTom

NAVIGATOR, refer to the TomTom

NAVIGATOR Quick Start Guide.

INSTALLATION REQUIREMENTS

5

Installation

requirements

• One of the compatible devices listed

above. For information on other

supported devices, visit the Palm

website at www.palm.com

.

• GPS receiver (included).

• Expansion card (included).

Setting up

NAVIGATOR

software on your

device

Install NAVIGATOR software

1 Turn the GPS receiver on and position it

in a location with an unobstructed view

of the sky.

2 Make sure your device’s Bluetooth

functionality is turned on:

Palm OS devices Go to Applications

and select Bluetooth . Select On if

it is not already selected.

Windows Mobile devices Go to the

Today screen and tap Bluetooth .

Check the Turn on Bluetooth box if it is

not already checked.

SETTING UP NAVIGATOR SOFTWARE ON YOUR DEVICE

6

3 Insert the TomTom NAVIGATOR

expansion card included in this package

into your device’s expansion card slot.

4 On a Windows Mobile device, select

Ye s if prompted. After the installation is

complete, select OK.

NOTE On a Palm OS device, the software

application opens automatically.

Select your basic NAVIGATOR settings

1 Tap the language you want, and then

tap Ye s .

2 When prompted, tap the screen to

begin preference selection.

3 Select right- or left-handed operation,

and then tap Done.

4 Select how distances are displayed, and

then tap Done.

5 Select how time is displayed, and then

tap Done.

6 Tap the left and right arrows to select a

voice, and then tap Select.

7 If prompted to select a map, tap the

map you want.

Tap to scroll

voice

options

SETTING UP NAVIGATOR SOFTWARE ON YOUR DEVICE

7

Activate the NAVIGATOR software

1 If you have a data plan with your

wireless carrier, tap Automatic. If you

do not have a plan or aren’t sure, tap

Manual.

2 If you selected Automatic, tap Activate

and then enter the 15-character code

printed on the product code label. The

software is activated through your

device’s wireless connection.

3 If you selected Manual, do the

following:

• On your computer, go to

www.ttcode.com

and select the

Product Activation option for your

country.

• Enter the 15-character code printed

on the product code label, and then

enter the device code displayed on

your device screen.

• On your device, tap Activate.

xxxxx-xxxxx-xxxxx

Product code

xxxxx-xxxxx-xxxxx

Product

code

Device

code

SETTING UP NAVIGATOR SOFTWARE ON YOUR DEVICE

8

• Enter the activation code displayed on

your computer screen.

4 Tap Done.

Complete NAVIGATOR software setup

1 Tap Continue, and then tap Ye s .

2 Enter or scroll to your zip code or city,

and then tap it when it is displayed.

3 Enter or scroll to your street name, and

then tap it when it is displayed.

4 Enter your house number, and then tap

Done.

5 On the Select your GPS receiver screen,

select To m To m / Pa l m G P S , and then

tap Select.

6 Do one of the following:

Palm OS devices If prompted, enter

the four-digit passkey 0000 (four

zeroes), and then select Add to trusted

devices list. You need to enter the

passkey the first time you create a

partnership between your device and

the receiver only.

EXITING NAVIGATOR

9

Windows Mobile devices Once you

tap Select, your device creates a

partnership with the receiver

automatically.

7 Repeatedly tap the screen to take a tour

of NAVIGATOR.

8 On the Legal notice screen, read the

information and then tap I agree if you

agree.

NOTE You must tap I agree to use the

software.

NAVIGATOR is now ready for use on your

device.

Exiting NAVIGATOR

You should exit the NAVIGATOR application

when you are finished using it.

1 On the NAVIGATOR navigation screen,

tap the top portion of the screen to

open the Main Menu.

2 Tap the blue arrow until the Main Menu

3 of 3 screen is displayed.

3 Tap Exit application.

COMMON QUESTIONS

10

Common questions

What is the passkey I’m asked to enter

when creating a partnership between my

device and the Bluetooth

®

GPS receiver?

Like a password, the passkey is a security

measure. Connections can happen only

between your device and a Bluetooth

device that has the same passkey.

The passkey for the receiver is 0000 (four

zeroes). You should need to enter the

passkey only the first time you establish a

Bluetooth connection between your device

and the receiver.

My device does not seem like it

successfully connected to the receiver

after setup. What should I do?

If the setup process does not seem to

work, try manually creating a partnership

between your device and the receiver.

For Palm OS devices:

1 Go to Applications and select

Bluetooth .

2 Select On if it is not already selected.

3 Select Setup Devices, and then select

Trusted Devices.

4 Select Add Device.

5 Select the GPS receiver from the

discovery results list. If the receiver

doesn’t appear in the list, select Find

More.

6 Enter the four-digit passkey 0000 (four

zeroes) on your device.

7 Select Done.

For Windows Mobile devices:

1 Go to your Today screen and tap

Bluetooth .

2 Check the Turn on Bluetooth box if it is

not already checked.

3 Select the Devices tab, and then select

New Partnership.

4 Select the GPS receiver from the device

list, and then press Next (right

action key).

5 Enter the four-digit passkey 0000 (four

zeroes) on your device, and then press

Next (right action key).

COMMON QUESTIONS

11

6 Check the Serial Port box, and then

press Finish (right action key).

7 Press OK .

Should I keep my device and the receiver

connected to the vehicle power adapter

while they are in use?

If your device is fully charged, it can run for

about four to five hours in the car. For

longer trips, it is a good idea to keep the

vehicle power adapter connected to keep

both your device and the receiver charged.

This prevents the batteries from getting

too low for the Bluetooth connection to

function.

Where can I get customer support if I

need it?

Go to the Palm website at

www.palm.com/support

.

IMPORTANT SAFETY AND LEGAL INFORMATION

12

Important safety and

legal information

Please read the following information to ensure safe use of the GPS

Navigator.

Global Positioning System

The Global Positioning System (GPS) is a satellite-based system that

provides location and timing information around the globe. GPS is

operated and controlled under the sole responsibility of the

Government of the United States of America, which is responsible for

its availability and accuracy. Any changes in GPS availability and

accuracy may impact the operation of your GPS receiver.

Environmental conditions will affect the operation of your GPS

receiver. TomTom B.V. and Palm cannot accept any liability for the

availability and accuracy of GPS.

Use With Care

Use of a GPS receiver for navigation does not by any means

substitute for the need to drive with due care and attention.

WARNING!

Do not mount the GPS Navigator where the driver’s field of vision is

obscured or where airbags may deploy, and do not place it on the

dashboard without securing it reliably. Do not mount the unit or route

the cables in such a way as to interfere with control of the vehicle.

Failure to follow these guidelines could result in an accident or

collision resulting in serious injury or death.

Drive safely using information from street signs and landmarks in

addition to the GPS Navigator. Do not become distracted by the GPS

Navigator while operating the vehicle. Use voice prompts to minimize

the need to look at the display. Do not input destinations or access

other functions that take time to complete unless the vehicle is safely

stopped. Make all settings before departing or pull off the road in a

safe and legal manner if changes need to be made.

CAUTION

Use GPS Navigator only as an aid to navigation. It is not designed for

any use requiring precise measurements. The Global Positioning

System (GPS) is operated by the government of the United States of

America and is subject to changes which could affect the accuracy

and performance of this GPS equipment.

NOTICE TO DRIVERS

When using this product you must obey your local vehicle codes.

Some vehicle codes restrict any object or material from being placed,

displayed, installed, affixed, or applied upon the windshield or side or

rear windows. Where such codes exist, when using this product, the

suction cup mount pad should be used instead of attaching the

mount directly to the vehicle windshield or side or rear windows.

Palm is not responsible for any damages, fines, or penalties that may

result from disregarding this notice.

Aircraft and Hospitals

Use of devices with an antenna is prohibited on most aircraft, in many

hospitals, and in many other locations. The GPS receiver must not be

used in these environments.

Heat-Reflective Shields

Some newer-model vehicles may have a heat-reflective shield

embedded in the windshield, which may prevent proper GPS signal

reception if the receiver is placed behind the windshield. To enable

proper reception:

• Place the receiver in a different position, or

• Place the receiver behind the rearview mirror, where many

vehicles have an opening in the heat reflective shield, as

indicated by a black outline.

Installation, Use, and Maintenance

IMPORTANT Do not attempt to service this product yourself. Do

not open, puncture, or disassemble the product.

In order for the GPS receiver to work properly, make sure that the

receiver has an unobstructed view of the sky. Protect the receiver

IMPORTANT SAFETY AND LEGAL INFORMATION

13

from excessive heat, extreme cold, dust, liquids, and direct sunlight.

Do not use in a humid environment or on an unstable surface. Make

sure the receiver is always securely mounted to prevent accidental

movement. Handle all parts, cables, and connectors with care. Use

only supplied and recommended accessories and power supplies.

Ensure that any power supply is cooled by placing it in a ventilated

area. The power supply and the receiver unit may become warm or

hot during operation. Unplug the product from any external power

source before cleaning. Only clean the product with a dry cloth.

Follow the instructions in this manual carefully.

FCC statement

This device complies with part 15 of the FCC rules. Operation is

subject to the following two conditions: (1) This device may not cause

harmful interference, and (2) this device must accept any interference

received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits

for a Class B digital device, pursuant to Part 15 of the FCC rules.

These limits are designed to provide reasonable protection against

harmful interference in a residential installation. This equipment

generates, uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause

harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If

this equipment does cause harmful interference to radio or television

reception, which can be determined by turning the equipment off and

on, the user is encouraged to try to correct the interference by one or

more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from

that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

The use of shielded I/O cables is required when connecting this

equipment to any and all optional peripheral or host devices. Failure

to do so may violate FCC rules.

IMPORTANT Changes or modifications not covered in this manual

must be approved in writing by the manufacturer’s Regulatory

Engineering Department. Changes or modifications made without

written approval may void the user’s authority to operate this

equipment.

Responsible Party:

HOLUX Technology, Inc.

1F, No.30, R&D Rd. II,

Hsinchu City 300,

Taiwan (R.O.C)

+886-3-6687000

Canadian ICES-003 Statement

This Class B digital apparatus meets all requirements of the Canadian

Interference-Causing Equipment Regulations. Operation is subject to

the following two conditions: (1) This device may not cause harmful

interference, and (2) this device must accept any interference

received, including interference that may cause undesired operation.

Cet appareil numérique de la classe B respecte toutes les exigences

du Réglement sur le matériel brouilleur du Canada. Son utilisation est

sujette aux deux conditions suivantes: (1) Cet appareil ne doit pas

produire d’interférences nuisibles et (2) il doit pouvoir supporter toute

interférence reçue, même si ces interférences perturbent son

fonctionnement.

Palm GPS Navigator

Tested to Comply

With FCC Standard

FOR HOME OR OFFICE USE

IMPORTANT SAFETY AND LEGAL INFORMATION

14

CE Compliance Statement

This product was tested by Palm, Inc. and found to comply with all

the requirements of the EMC Directive 89/336/EEC as amended.

Static Electricity, ESD, and Your Palm Device

Electrostatic discharge (ESD) can cause damage to electronic devices

if discharged into the device, so you should take steps to avoid such

an occurrence.

Description of ESD Static electricity is an electrical charge caused by

the buildup of excess electrons on the surface of a material. To most

people, static electricity and ESD are nothing more than annoyances.

For example, after walking over a carpet while scuffing your feet,

building up electrons on your body, you may get a shock-the

discharge event-when you touch a metal doorknob. This little shock

discharges the built-up static electricity.

ESD-susceptible equipment Even a small amount of ESD can harm

circuitry, so when working with electronic devices, take measures to

help protect your electronic devices, including your Palm® device,

from ESD harm. While Palm has built protections against ESD into its

products, ESD unfortunately exists and, unless neutralized, could

build up to levels that could harm your equipment. Any electronic

device that contains an external entry point for plugging in anything

from cables to docking stations is susceptible to entry of ESD.

Devices that you carry with you, such as your Palm device, build up

ESD in a unique way because the static electricity that may have built

up on your body is automatically passed to the device. Then, when

the device is connected to another device such as a docking station, a

discharge event can occur.

Precautions against ESD Make sure to discharge any built-up static

electricity from yourself and your electronic devices before touching

an electronic device or connecting one device to another. The

recommendation from Palm is that you take this precaution before

connecting your Palm device to your computer, placing a device in a

cradle, or connecting it to any other device. You can do this in many

ways, including the following:

• Ground yourself when you're holding your device by

simultaneously touching a metal surface that is at earth ground.

For example, if your computer has a metal case and is plugged

into a standard three-prong grounded outlet, touching the case

should discharge the ESD on your body.

• Increase the relative humidity of your environment.

• Install ESD-specific prevention items, such as grounding mats.

Conditions that enhance ESD occurrences Conditions that can

contribute to the buildup of static electricity in the environment

include the following:

• Low relative humidity.

• Material type. (The type of material gathering the charge. For

example, synthetics are more prone to static buildup than natural

fibers like cotton.

• The rapidity with which you touch, connect, or disconnect

electronic devices.

While you should always take appropriate precautions to discharge

static electricity, if you are in an environment where you notice ESD

events, you may want to take extra precautions to protect your

electronic equipment against ESD.

For information on environmental programs, visit

www.palm.com/environment

.

Hinweise zu geistigem Eigentum

Palm, Treo, Palm OS und das Palm-Logo sind Marken oder

eingetragene Marken im Eigentum von bzw. lizenziert an Palm, Inc.

Alle anderen Marken und Produktnamen sind Marken der jeweiligen

Eigentümer und werden zur Erkennung von Produkten oder

Dienstleistungen verwendet.

TomTom und das TomTom-Logo sind eingetragene Marken von

TomTom International B.V., Niederlande. Alle anderen Marken sind

Marken ihrer jeweiligen Eigentümer. Für dieses Produkt gelten unser

Endbenutzer-Lizenzvertrag und eine eingeschränkte Garantie; im

Lieferumfang enthalten. Beide können unter www.tomtom.com/legal

eingesehen werden.

Haftungsausschluss und Haftungsbegrenzung

Palm, Inc. übernimmt keine Haftung für Schäden oder Verluste, die

aus der Verwendung dieses Handbuchs resultieren.

Palm, Inc. übernimmt keine Haftung für Verluste oder Ansprüche

Dritter, die aus der Verwendung dieses Geräts und der zugehörigen

von Palm, Inc. bereitgestellten Software entstehen.

Palm, Inc. übernimmt keine Haftung für Schäden oder Verluste, die

durch Löschen von Daten als Folge von Fehlfunktionen, leeren Akkus

oder Reparaturen verursacht werden. Erstellen Sie stets Backup-

Kopien aller wichtigen Daten auf anderen Medien, um Datenverlust

vorzubeugen.

HINWEIS Lesen Sie die im Lieferumfang enthaltene

Lizenzvereinbarung für Endbenutzer, bevor Sie die Arbeit mit dem

bzw. den begleitenden Softwareprogramm(en) aufnehmen. Durch

Verwendung eines beliebigen Teils der Software erklären Sie sich mit

den Bedingungen der Lizenzvereinbarung für Endbenutzer

einverstanden.

V2.0

ERSTE SCHRITTE

16

Erste Schritte

Der Palm

®

-GPS-Navigator bietet detaillierte

Straßenkarten, Routenplanung und

sprachgestützte Navigation.

Der GPS-Navigator verwendet TomTom

NAVIGATOR-Software und -Karten auf

Ihrem Gerät. Zur Benutzung des Navigators

stellt Ihr Gerät über Bluetooth

®

eine

drahtlose Verbindung zum mitgelieferten

GPS-Empfänger her. Der Empfänger

überträgt dann die Informationen an die

NAVIGATOR-Software, die auf dem

Bildschirm Ihres Geräts zu sehen ist.

In dieser Anleitung finden Sie

Informationen zur Einrichtung der TomTom

NAVIGATOR-Software auf Ihrem Gerät.

Bestimmte Schritte zur Einrichtung der

NAVIGATOR-Software variieren, je

nachdem, ob Sie ein kompatibles Gerät mit

Palm OS

®

-Software oder ein kompatibles

Gerät mit Windows Mobile

®

-Software

besitzen.

Kompatible Palm OS-Geräte

• Palm

®

Treo

™

650-Smartphone

• Palm

®

Treo

™

680-Smartphone

• Palm

®

Treo

™

700p-Smartphone

Kompatible Windows Mobile-Geräte

• Palm

®

Treo

™

700w- oder 700wx-

Smartphone

• Palm

®

Treo

™

750- oder 750v-

Smartphone

Weitere Anweisungen zur Einrichtung des

GPS-Empfängers enthält das im

Lieferumfang enthaltene Poster Einrichtung

des GPS-Navigators. Weitere

Anweisungen zur Benutzung von TomTom

NAVIGATOR enthält das Handbuch

TomTom NAVIGATOR Quick Start Guide

(TomTom-Kurzanleitung).

INSTALLATIONS ANFORDERUNGEN

17

Installations-

anforderungen

• Eines der oben aufgeführten

kompatiblen Geräte. Informationen zu

anderen unterstützten Geräten finden

Sie auf der Palm-Website

(www.palm.com

).

• GPS-Empfänger (mitgeliefert).

• Erweiterungskarte (mitgeliefert).

Einrichten der

NAVIGATOR-

Software auf dem

Gerät

Installieren der NAVIGATOR-Software

1 Schalten Sie den GPS-Empfänger ein

und positionieren Sie ihn so, dass die

Sicht auf den Himmel nicht blockiert ist.

2 Stellen Sie sicher, dass die Bluetooth-

Funktion Ihres Geräts eingeschaltet ist:

Palm OS-Geräte Gehen Sie zur

Anwendungsansicht und wählen Sie

Bluetooth . Tippen Sie auf die

Option Ein, sofern sie noch nicht

aktiviert ist.

EINRICHTEN DER NAVIGATOR-SOFTWARE AUF DEM GERÄT

18

Windows Mobile-Geräte Gehen Sie

zum Bildschirm „Today“ (Heute) und

tippen Sie auf Bluetooth . Aktivieren

Sie das Kontrollkästchen Tu rn o n

Bluetooth (Bluetooth einschalten), falls

noch nicht geschehen.

3 Schieben Sie die mitgelieferte TomTom

NAVIGATOR-Erweiterungskarte in den

Erweiterungskartensteckplatz Ihres

Geräts ein.

4 Wenn Sie ein Gerät mit Windows

Mobile verwenden, wählen Sie Ja, falls

eine Aufforderung angezeigt wird.

Wählen Sie nach Abschluss der

Installation OK.

HINWEIS Auf einem Gerät mit Palm OS

wird die Softwareanwendung automatisch

geöffnet.

Wählen Sie die NAVIGATOR-

Haupteinstellungen aus

1 Tippen Sie auf die gewünschte Sprache

und dann auf Ja.

2 Wenn Sie dazu aufgefordert werden,

tippen Sie auf den Bildschirm, um mit

der Auswahl der gewünschten

Voreinstellungen zu beginnen.

3 Geben Sie an, ob Sie die Anwendung

mit der rechten oder linken Hand

bedienen möchten und tippen Sie dann

auf Fertig.

4 Geben Sie an, ob Entfernungen in

Meilen oder Kilometer angezeigt

werden sollen und tippen Sie dann auf

Fertig.

La pagina sta caricando ...

Palm GPS 3301 Manuale del proprietario

Questo manuale è adatto anche per

Palm GPS 3301 Manuale del proprietario

in altre lingue

Documenti correlati

Altri documenti