NexiGo N940P Manuale utente

User Manual

2K QHD Webcam

Scan the QR code or visit our link to

download the latest manual here:

nexigo.com/manuals

N940P

CONTENT

TRANSLATIONS

01

20

32

44

56

English

Español

Italiano

Français

Deutsch

WELCOME TO THE NEXIGO FAMILY!

CONTACT INFORMATION

Website: www.nexigo.com Manufacturer: Nexight INC

E-mail: [email protected]omTel: +1(458) 215-6088

Address: 11075 SW 11th St, Beaverton, OR, 97005, US

Thank you for choosing the NexiGo N940P QHD Webcam!

You are now part of an exclusive club: the NexiGo family!

It's our job to make sure you enjoy your membership.

If you have any problems please contact us at

[email protected]om anytime for further assistance. Make

sure to register your purchase at nexigo.com/warranty

within 14 days of the delivery date to extend your

warranty coverage to TWO Years!

From all of us here at NexiGo, we want to thank you for

your trust in us. We look forward to serving you again

in the near future.

Yours Sincerely,

The NexiGo Team

US 01EN 01

NEXIGO WEBCAM SETTINGS SOFTWARE

NexiGo is proud to introduce the new NexiGo Webcam

Settings software! Free of charge to all our loyal NexiGo

customers, use it to enhance your experience with your

webcam. Just head on over to nexigo.com/software to

download it. The NexiGo Webcam Settings software

allows you to change almost every setting for your

webcam. From brightness to focus, from saturation to

hue, ﬁnd the look that highlights the best you!

Download the NexiGo

Webcam Setting Software

nexigo.com/software

US 02EN 02

PRODUCT OVERVIEW

1 x QHD Webcam 1 x User Manual

1 x Privacy Cover 1 x USB C to USB Adapter

1 x RF Remote (Requires 2 AAA batteries, not included)

PACKAGE INCLUDES

4. Flexible Clip/Base

5. 1/4" Tripod Screw Hole 54

1. QHD Lens

2. Noise Reduction

Microphones

3. Power Indicator

3

22

1

EN 03

SPECIFICATION

• Windows 7/8/10/11 or above

• macOS 10.6 or above

• Chrome OS V29.01547 or above

Chat software: Skype, FaceTime, Zoom,

Yahoo!, Hangouts

Streaming software: Open Broadcaster

Software and Xsplit

Photo or video: Using system Camera

App (Camera for Windows, Photo Booth

for macOS)

D=88°/H=78°/V=49°

Auto Focus

Video

resolution

Digital zoom

Field of view

Application

support

2560 x 1440@30fps, 1920 x 1080@60fps,

1280 x 720@30fps

Up to 3X digital zoom at 1080p@30fps

Sensor 1/2.8 inch SONY Starvis IMX335 sensor

System

requirements

Focus type

EN 04

REMOTE INSTRUCTIONS

Power Button: Press to turn

on/off the camera. The

indicator light turns off when

powering off.

Mute Button: Press to

mute/unmute the camera’s

microphone. The indicator

light will ﬂash blue when

muted.

Stop Video Button: Press to

stop/start the video.

Essentially this is a mute

function for the video.

Home Button: Press to reset

your view to its default state.

Preset: Press to enter preset

settings mode. Press and hold

for 2 seconds to enter cancel

preset settings mode. (See

details on page 17)

1/2 Buttons: Press to switch to

the preset position 1/2.

EN 05

Brightness +: Increase the brightness of the

video capture.

Brightness -: Decrease the brightness of the

video capture.

Zoom +: Press to zoom in on the video. Hold to

adjust faster.

Zoom -: Press to zoom out the video. Hold to

adjust faster.

Note: The resolution must be set to 1920 x 1080

before using the zoom function

Vertical Flip: Press to ﬂip the video vertically

when you mount the camera upside down,

press again to restore normal.

Arrow Buttons: Press the arrow buttons to

pan/tilt the camera's view when it is zoomed in.

Hold to increase the speed of the pan/tilt.

Backlight Compensation (BLC) Button: Press to

add BL. Press again to restore default settings.

Frequency Button: Press to switch the power

line frequency between 50Hz and 60Hz based

on your needs. (The default frequency is 60Hz.)

EN 06

. PLACE/POSITION YOUR WEBCAM

. CONNECT THE WEBCAM TO YOUR COMPUTER

USING THE USB CABLE

Notes:

1. Make sure you are connected to your network before

starting the setup.

2. If you cannot use the camera within other apps, you

will need to enable access.

SETTING UP YOUR WEBCAM

EN 07

• In Windows: Select Settings>Privacy>Camera, turn on

allow apps to access your camera.

• On Mac: Select Apple menu>System Preferences>

Security & Privacy>Privacy>Camera, and select which

apps you want to use the camera. If you still have

trouble connecting the Webcam, please refer to FAQ

sections starting from Page 10.

Windows users can use the Camera app, which is

pre-installed with Windows. To ﬁnd the Camera app

type "camera" (without the quotation marks) in the

search bar at the bottom of the screen and press enter.

Alternatively, go to the Start menu at the bottom right

corner of the screen and left click. Scroll through the

list of programs there until you get to the "C" section,

the Camera application will be listed there. To view

your webcam video you may need to select "the

NexiGo camera" from the list of other devices. At the

top right or left of your screen click the cycle camera

icon (the arrow chasing itself, not the gear), and keep

switching until you get to the NexiGo webcam.

A. VIEW YOUR CAMERA: Windows

EN 08

Mac users can use the Photo Booth app, which is

pre-installed with the OS. This will allow you to preview

the camera images, capture still frames, and record

video clips. To begin, select the Finder button, click

Applications, and select Photo Booth.

Alternately, click the Search button in your menu bar,

type "photo booth" (without the quotation marks), and

press return. To see an image from your camera in Photo

Booth, you may need to select the camera from the list

of attached devices in the app. At the top of your screen,

click Camera in the app menu, and select the NexiGo

Webcam from the list of options.

B. VIEW YOUR CAMERA: Mac

EN 09

1) A computer with speakers (or a headset), your

NexiGo webcam, and a microphone;

2) Install a video-calling application such as Skype,

FaceTime, Zoom, or Hangouts. (Both parties need a

webcam and the same video application.)

. VIDEO CALLING REQUIREMENTS

Any changes or modiﬁcations not expressly approved

by the party responsible for compliance could void

the user's authority to operate the equipment.

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

(1) this device may not cause harmful interference,

and

(2) this device must accept any interference received,

including interference that may cause undesired

operation.

FCC REQUIREMENT

Q1: How do I know if my camera is being recognized

by the system?

FAQ

EN 10

To verify the webcam is connected on a Mac computer,

click the Apple Menu (in the top left corner of your

screen) and then click About this Mac. Click on System

Report from the pop-up window that appears. The

System Information window for your Mac will appear.

Navigate to the USB section and check if the webcam

is listed as a connected device (like the photo below):

A: Connect the camera to any USB 2.0 or USB 3.0 port.

It will take a few seconds for the camera to be

recognized after it is connected to the system. To

ensure the camera has installed correctly on a

Windows computer; check under Control Panel>

System and Security>Device Manager.

EN 11

Q2: What is the video recording frame-rate?

A: The NexiGo webcam captures clear images and can

record video at 1440p/30fps or 1080p/60fps in a well-lit

environment. The quality of the signal can be affected

by low bandwidth availability or insucient lighting.

This can cause the frame rate to drop to 1440p/20fps

or 1080p/50fps, or possibly even lower.

Note: This webcam can only record at 60fps when at

1080p resolution.

EN 12

Q3: What can I do if the images or video are an

abnormal color? How to adjust image parameters

such as brightness or contrast?

A: Please ensure that the light in your environment is

free of unique tones or intense light sources. Things

such as walls/ﬂoors/other large-area non-standard

light sources, including areas with colored or intense

light. In such environments photographed pictures

are subjected to color cast due to the lighting

impact of these light sources.

For Windows & Mac:

Using the NexiGo Webcam Setting Software, you can

adjust the image parameter you want according to

your needs.

Note: Download the NexiGo Webcam Setting Software

from nexigo.com/software.

EN 13

EN 14

1 2 3

Q4: Why is my video not in 1440p in my video calling

application?

A: Check the video output settings in your video

capture software, these may be set to a lower capture

format. There are various constraints on the system

that could impede the ability to attain a 1440p video

calling session. They center around processing power

(i.e. CPU speed) and available network bandwidth. In

all cases, review the requirements from the video

calling application. They will guide as to the system

performance required as well as the necessary

bandwidth.

Q5: How to use the webcam privacy shutter?

EN 15

Q6: Why does my screen go blank or black while

trying to preview images?

A: There are several reasons this could happen:

1. There is something wrong with the USB port.

Please use a different USB port or another PC and

test the camera again.

2. The PC does not recognize the camera device.

3. The operating system and computer conﬁguration

do not satisfy the requirements of the camera. Please

check your system speciﬁcations.

4. The video preview feature of the application is not

turned on, or the application has a privacy feature

that prohibits access to the camera. Please try with a

different application.

A: Step 1. Remove 3M tape backing on the back of the

privacy cover.

Step 2. Attach the cover to the webcam lens and

press ﬁrmly.

Step 3. Open/close the cover as needed.

EN 16

Q7: Why does my resolution drop to 1080p when

running at 60fps, or while using the zoom function on

the webcam?

A: This webcam is not able to maintain any combination

of 2K resolution, 60fps, and/or the built in zoom

function. For 2K resolution the frame rate will be set at

30fps and no built-in zoom functions will be able to be

used. 60fps is only possible with 1080p resolution and

no built-in zoom. The built in zoom is only usable at

1080p resolution and 30fps. Alternatively, vou can use

a program like OBS to create a virtual camera running

at 60fps or at 2K resolution, and use the ability to

manipulate the image in their program to zoom the

image in. For assistance with OBS, please contact the

software manufacturer.

Q8: How do I use the preset function?

A: Preset Settings:

Step 1. Adjust the camera view to ﬁt your needs. You

can zoom in/out using the zoom buttons or pan and

tilt the camera using the arrow buttons.

Step 2. Press the Preset button. This will cause the

camera to enter Preset Setting Mode, and the camera

video playback will darken/become more opaque.

EN 17

Step 3. Press either the 1 or 2 button to save your

preset. It will be saved to this slot and will override any

previously saved preset. This will restore the camera’s

video playback to its original look.

Remove Preset Settings:

Step 1. Press and hold the Preset button for 2

seconds. This will cause the camera to enter Remove

Preset Setting Mode, and the camera video playback

will darken/become more opaque.

Step 2. Press either the 1 or 2 button to clear the

settings saved in the corresponding button.

Q9: Why is there ﬂickering or banding on the video

feed when I use the webcam?

A: This might be due to lighting inconsistencies in your

room. To resolve this, download the NexiGo Webcam

Setting Software from nexigo.com/software. In the

software, select your NexiGo webcam in the device

selection bar, then change the powerline frequency to

either 50Hz or 60Hz depending on your needs. For

example, if your screen ﬂicks at 50Hz, you can switch

to 60Hz to solve it.

Note: The camera defaults to indoor mode. Please do

not aim the camera directly at the light source.

EN 18

La pagina si sta caricando...

NexiGo N940P Manuale utente

NexiGo N940P Manuale utente

in altre lingue

Documenti correlati

Altri documenti