Sony CCD-TRV49 Manuale utente

3-065-648-11 (3)

CCD-TRV49/TRV58/TRV68/TRV78/

TRV88/TRV98

Model No. CCD-TRV Model No. AC-L

Serial No. Serial No.

Video Camera

Recorder

Operating Instructions

Before operating the unit, please read this manual thoroughly,

and retain it for future reference.

Owner’s Record

The model and serial numbers are located on the bottom. Record the

serial number in the space provided below. Refer to these numbers

whenever you call upon your Sony dealer regarding this product.

CCD-TRV98

2

WARNING

To prevent fire or shock hazard, do

not expose the unit to rain or

moisture.

For customers in the United

States and Canada

DISPOSAL OF LITHIUM ION BATTERY.

LITHIUM ION BATTERY.

DISPOSE OF PROPERLY.

You can return your unwanted lithium ion batteries

to your nearest Sony Service Center or Factory

Service Center.

Note: In some areas the disposal of lithium ion

batteries in household or business trash may

be prohibited.

For the Sony Service Center nearest you call

1-800-222-SONY (United States only)

For the Sony Factory Service Center nearest you call

416-499-SONY (Canada only)

Caution: Do not handle damaged or leaking lithium

ion battery.

For customers in the U.S.A.

CAUTION

You are cautioned that any changes or modifications

not expressly approved in this manual could void

your authority to operate this equipment.

This symbol is intended to alert

the user to the presence of

uninsulated “dangerous voltage”

within the product’s enclosure

that may be of sufficient

magnitude to constitute a risk of

electric shock to persons.

This symbol is intended to alert

the user to the presence of

important operating and

maintenance (servicing)

instructions in the literature

accompanying the appliance.

Never expose the battery pack to temperatures

above 60°C (140°F) such as in a car parked in

the sun or under direct sunlight.

Welcome!

Congratulations on your purchase of this Sony Handycam Vision

TM

camcorder. With your

Handycam Vision, you can capture life’s precious moments with superior picture and sound

quality. Your Handycam Vision is loaded with advanced features, but at the same time it is

very easy to use. You will soon be producing home video that you can enjoy for years to

come.

3

Note:

This equipment has been tested and found to comply

with the limits for a Class B digital device, pursuant

to Part 15 of the FCC Rules. These limits are designed

to provide reasonable protection against harmful

interference in a residential installation. This

equipment generates, uses, and can radiate radio

frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful

interference to radio communications. However,

there is no guarantee that interference will not occur

in a particular installation. If this equipment does

cause harmful interference to radio or television

reception, which can be determined by turning the

equipment off and on, the user is encouraged to try to

correct the interference by one or more of the

following measures:

— Reorient or relocate the receiving antenna.

— Increase the separation between the equipment

and receiver.

— Connect the equipment into an outlet on a circuit

different from that to which the receiver is

connected.

— Consult the dealer or an experienced radio/TV

technician for help.

For customers in CANADA

CAUTION

TO PREVENT ELECTRIC SHOCK, MATCH

WIDE BLADE OF PLUG TO WIDE SLOT,

FULLY INSERT.

4

Main Features

Functions to adjust exposure (in the recording mode)

•In a dark place NIGHTSHOT (p. 26)

•In dark environments such as sunset, fireworks, Sunset & moon mode (p. 39)

or general night views

•Shooting backlit subjects BACK LIGHT (p. 25)

•In spotlight, such as at the theater or a formal Spotlight mode (p. 39)

event

•In strong light or reflected light, such as Beach & ski mode (p. 39)

at a beach in midsummer or on a ski slope

Functions to give images more impact (in the recording mode)

•Smooth transition between scenes FADER (p. 36)

•Digital processing of images PICTURE EFFECT (p. 38)

•Creating a soft background for subjects Soft portrait mode (p. 39)

•Superimposing a title TITLE (p. 43)

Functions to give a natural appearance to your recordings

(in the recording mode)

•Preventing deterioration of picture quality D ZOOM [MENU] (p. 52)

in digital zoom

The default setting is set to OFF.

(To zoom greater than 20×, select the digital zoom

power in D ZOOM in the menu settings. )

•Focusing manually Manual focus (p. 42)

•Shooting distant subjects Landscape mode (p. 39)

•Recording fast-moving subjects Sports lesson mode (p. 39)

Functions to use in editing (in the recording mode)

•Watching the picture on a wide-screen TV Wide mode (p. 34)

•Playing back the picture on a TV without SUPER LASER LINK (p. 33)

connecting a cord (CCD-TRV98 only)

•Recording with the date/time Date and time (p. 27)

•Enhancing old tapes ORC [MENU] (p. 54)

Functions to use after recording (in the playback mode)

•Correcting jitter TBC [MENU] (p. 53)

•Correcting color noise DNR [MENU] (p. 53)

5

Table of contents

Main Features .......................................... 4

Quick Start Guide ............................... 6

Getting started

Using this manual ................................... 8

Checking supplied accessories............ 10

Step 1 Preparing the power supply... 11

Installing the battery pack ............ 11

Charging the battery pack ............ 12

Connecting to a wall outlet ........... 16

Step 2 Setting the date and time ........ 17

Step 3 Inserting a cassette ................... 19

Recording – Basics

Recording a picture .............................. 20

Shooting backlit subjects

– BACK LIGHT ........................ 25

Shooting in the dark

– NightShot............................... 26

Superimposing the date and time on

pictures ...................................... 27

Checking the recording

– END SEARCH ............................. 28

Playback – Basics

Playing back a tape ............................... 29

Viewing the recording on TV .............. 32

Advanced Recording

Operations

Using the wide mode ........................... 34

Using the fader function ......................36

Using special effects

– Picture effect................................. 38

Using the PROGRAM AE function .... 39

Adjusting the exposure manually ...... 41

Focusing manually................................ 42

Superimposing a title ........................... 43

Making your own titles ........................ 45

Using the built-in light ......................... 47

Editing

Dubbing a tape ...................................... 50

Customizing Your Camcorder

Changing the menu settings................ 51

Troubleshooting

Types of trouble and their solutions

........................................................... 57

Self-diagnosis display .......................... 61

Warning indicators and messages...... 62

Additional Information

Usable cassettes and playback modes

........................................................... 64

About “InfoLITHIUM” battery........... 65

Using your camcorder abroad ............ 66

Maintenance information and

precautions ...................................... 67

Specifications ......................................... 72

Quick Reference

Identifying the parts and controls ...... 73

Index ........................................ Back cover

Quick Start Guide

6

Quick Start Guide

This chapter introduces you to the basic features of your

camcorder. See the page in parentheses “( )” for more

information.

Open the DC IN

jack cover.

Connect the plug with

its v mark facing up.

Inserting a cassette (p. 19)

Connecting the power cord (p. 16)

Use the battery pack when using your camcorder outdoors (p. 11).

3Close the cassette

compartment by

pressing the

mark

on the cassette

compartment. The

cassette compartment

automatically goes

down.

Close the lid of the

cassette compartment.

1Open the lid of the

cassette

compartment, and

press EJECT.

The compartment

opens automatically.

2Insert a cassette

into the cassette

compartment

with its window

facing out and

the write-protect

tab on the

cassette up.

EJECT

AC power adaptor (supplied)

Quick Start Guide

7

Recording a picture (p. 20)

Monitoring the playback picture on the LCD

screen

(p. 29)

NOTE

Do not pick up your camcorder by holding

the viewfinder, the LCD panel or the

battery pack.

3Open the LCD panel

while pressing OPEN.

The picture appears

on the LCD screen.

2 Set the POWER

switch to CAMERA

while pressing the

small green button.

4 Press the red button.

Your camcorder

starts recording. To

stop recording, press

the red button again.

1Remove the lens cap.

PLAYER

POWER

OFF

CAMERA

(

CHARGE

)

PLAYER

POWER

OFF

CAMERA

(

CHARGE

)

2Press m to rewind the tape.

3Press N to start playback.

1Set the POWER

switch to PLAYER

while pressing the

small green button.

REW

PLAY

PLAYER

POWER

OFF

CAMERA

(

CHARGE

)

Viewfinder

When the LCD panel is closed, use the viewfinder placing

your eye against its eyecup.

The picture in the viewfinder is black and white.

When you purchase your camcorder, the clock setting is set to off. If you want to record the

date and time for a picture, set the clock setting before recording (p. 17).

8

— Getting started —

Using this manual

The instructions in this manual are for the six models listed in the table below. Before

you start reading this manual and operating your camcorder, check the model number

by looking at the bottom of your camcorder. The CCD-TRV98 is the model used for

illustration purposes. Otherwise, the model name is indicated in the illustrations. Any

differences in operation are clearly indicated in the text, for example, “CCD-TRV98

only.”

As you read through this manual, buttons and settings on your camcorder are shown in

capital letters.

e.g. Set the POWER switch to CAMERA.

When you carry out an operation, you can hear a beep sound to indicate that the

operation is being carried out.

Types of differences

CCD- TRV49 TRV58 TRV68 TRV78 TRV88 TRV98

Remote sensor z ——z — z

Digital zoom 450× 460× 460× 560× 560× 560×

SUPER LASER LINK — — — — — z

SteadyShot — — zzzz

z Provided

— Not provided

Note on TV color systems

TV color systems differ from country to country. To view your recordings on a TV, you

need an NTSC system-based TV.

9

Getting started

Using this manual

Precautions on camcorder care

Lens and LCD screen / finder (on mounted models only)

•The LCD screen and the finder are manufactured using extremely high-precision

technology so over 99.99% of the pixels are operational for effective use.

However, there may be some tiny black points and/or bright points (white, red,

blue or green in color) that constantly appear on the LCD screen and the finder.

These points are normal in the manufacturing process and do not affect the

recording in any way.

•Do not let your camcorder get wet. Keep your camcorder away from rain and sea

water. Letting your camcorder get wet may cause your camcorder to malfunction.

Sometimes this malfunction cannot be repaired [a].

•Never leave your camcorder exposed to temperatures above 60°C (140°F), such as in a

car parked in the sun or under direct sunlight [b].

•Be careful when placing the camera near a window or outdoors. Exposing the LCD

screen, the finder or the lens to direct sunlight for long periods may cause

malfunctions [c].

•Do not directly shoot the sun. Doing so might cause your camcorder to malfunction.

Take pictures of the sun in low light conditions such as duck [d].

[a] [b] [c]

[d]

10

Checking supplied accessories

Make sure that the following accessories are supplied with your camcorder.

1 Wireless Remote Commander (1)

(p. 78)

CCD-TRV49/TRV78/TRV98 only

2 AC-L10A/L10B/L10C AC power adaptor

(1), Power cord (1) (p. 12)

3 NP-F330 battery pack (1) (p. 11, 12)

Contents of the recording cannot be compensated if recording or playback is not

made due to a malfunction of the camcorder, storage media, etc.

4 Size AA (R6) battery for Remote

Commander (2) (p. 78)

CCD-TRV49/TRV78/TRV98 only

5 A/V connecting cable (1) (p. 32)

6 Shoulder strap (1) (p. 75)

7 Lens cap (1) (p. 20, 74)

12

3

45 6 7

11

Getting started

Installing the battery pack

Install the battery pack to use your camcorder outdoors.

Slide the battery pack down until it clicks.

To remove the battery pack

Slide the battery pack out in the direction of the arrow while pressing BATT

RELEASE down.

Step 1 Preparing the power supply

BATT RELEASE

12

Step 1 Preparing the power supply

Charging the battery pack

Use the battery pack after charging it for your camcorder.

Your camcorder operates only with the “InfoLITHIUM” battery pack (L series).

See page 65 for more information about “InfoLITHIUM” battery pack.

(1) Open the DC IN jack cover and connect the AC power adaptor supplied with

your camcorder to the DC IN jack with the plug’s v mark facing up.

(2) Connect the power cord to the AC power adaptor.

(3) Connect the power cord to a wall outlet.

(4) Set the POWER switch to OFF (CHARGE). Charging begins, and the CHG

lamp lights up.

When the CHG lamp goes out, the charging is completed.

PLAYER

POWER

OFF

CAMERA

(

CHARGE

)

4

2

1

After charging the battery pack

Disconnect the AC power adaptor from the DC IN jack on your camcorder.

CHG lamp

13

Getting started

Step 1 Preparing the power supply

Notes

•Prevent metallic objects from coming into contact with the metal parts of the DC plug

of the AC power adaptor. This may cause a short-circuit, damaging the AC power

adaptor.

•Keep the battery pack dry.

•When the battery pack is not to be used for a long time, charge the battery pack fully,

and then use it until it fully discharges again. Do this once a year. Keep the battery

pack in a cool place.

While charging the battery pack, the CHG lamp does not light up in the following

cases

– The battery pack is not installed correctly.

– Something is wrong with the battery pack.

If the power may go off although the battery remaining indicator indicates that

the battery pack has enough power to operate

Charge the battery pack fully again so that the indication on the battery remaining

indicator is correct.

Charging time

Battery pack Full charge

NP-F330 (supplied) 150

NP-F530/F550 210

NP-F730/F730H/F750 300

NP-F930/F950 390

NP-F960 420

Approximate number of minutes to charge an empty battery pack

14

Recording time

CCD-TRV49/TRV58/TRV68/TRV78

Recording with Recording with

Battery pack the viewfinder the LCD screen

Continuous* Typical** Continuous* Typical**

NP-F330 (supplied) 140 75 120 65

NP-F530 245 135 205 110

NP-F550 280 155 240 130

NP-F730 500 275 410 225

NP-F730H/F750 580 320 490 270

NP-F930 780 430 650 355

NP-F950 900 495 750 410

NP-F960 1035 570 880 485

CCD-TRV88

Recording with Recording with

Battery pack the viewfinder the LCD screen

Continuous* Typical** Continuous* Typical**

NP-F330 (supplied) 140 75 95 50

NP-F530 245 135 160 90

NP-F550 280 155 195 105

NP-F730 500 275 325 180

NP-F730H/F750 580 320 395 215

NP-F930 780 430 515 285

NP-F950 900 495 610 335

NP-F960 1035 570 720 395

CCD-TRV98

Recording with Recording with

Battery pack the viewfinder the LCD screen

Continuous* Typical** Continuous* Typical**

NP-F330 (supplied) 140 75 95 50

NP-F530 245 135 155 85

NP-F550 280 155 190 105

NP-F730 500 275 315 175

NP-F730H/F750 580 320 385 210

NP-F930 780 430 495 270

NP-F950 900 495 590 325

NP-F960 1035 570 700 385

Approximate number of minutes when you use a fully charged battery pack

* Approximate continuous recording time at 25°C (77°F). The battery life will be

shorter if you use your camcorder in a cold environment.

** Approximate number of minutes when recording while you repeat recording start/

stop, zooming and turning the power on/off. The actual battery life may be shorter.

Step 1 Preparing the power supply

15

Getting started

Playing time

CCD-TRV49/TRV58/TRV68/TRV78

Battery pack

Playing time Playing time

on LCD screen with LCD closed

NP-F330 (supplied) 120 145

NP-F530 205 260

NP-F550 240 295

NP-F730 410 525

NP-F730H/F750 490 610

NP-F930 650 825

NP-F950 750 930

NP-F960 880 1090

CCD-TRV88

Battery pack

Playing time Playing time

on LCD screen with LCD closed

NP-F330 (supplied) 95 145

NP-F530 160 260

NP-F550 195 295

NP-F730 325 525

NP-F730H/F750 395 610

NP-F930 515 825

NP-F950 610 930

NP-F960 720 1090

CCD-TRV98

Battery pack

Playing time Playing time

on LCD screen with LCD closed

NP-F330 (supplied) 95 145

NP-F530 155 260

NP-F550 190 295

NP-F730 315 525

NP-F730H/F750 385 610

NP-F930 495 825

NP-F950 590 930

NP-F960 700 1090

Approximate number of minutes when you use a fully charged battery pack

The battery life will be shorter if you use your camcorder in a cold environment.

What is ”InfoLITHIUM”?

The “InfoLITHIUM” is a lithium ion battery pack which can exchange data such as

battery consumption with compatible electronic equipment. This unit is compatible

with the “InfoLITHIUM” battery pack (L series). Your camcorder operates only with

the “InfoLITHIUM” battery. “InfoLITHIUM” L series battery packs have the

mark.

“InfoLITHIUM” is a trademark of Sony Corporation.

Step 1 Preparing the power supply

16

Connecting to a wall outlet

When you use your camcorder for a long time, we recommend that you power it from a

wall outlet using the AC power adaptor.

(1) Open the DC IN jack cover, and connect the AC power adaptor to the DC IN

jack on your camcorder with the plug’s v mark facing up.

(2) Connect the power cord to the AC power adaptor.

(3) Connect the power cord to a wall outlet.

PRECAUTION

The set is not disconnected from the AC power source (wall outlet) as long as it is

connected to the wall outlet, even if the set itself has been turned off.

Notes

•The AC power adaptor can supply power even if the battery pack is attached to your

camcorder.

•The DC IN jack has “source priority”. This means that the battery pack cannot supply

any power if the power cord is connected to the DC IN jack, even when the power

cord is not plugged into a wall outlet.

•Place the AC power adaptor near a wall outlet.

While using the AC power adaptor, if any trouble occurs with this unit, disconnect the

plug from the wall outlet as soon as possible to cut off the power.

Using a car battery

Use Sony DC Adaptor/Charger (optional).

Step 1 Preparing the power supply

2, 3

1

17

Getting started

2

4

1,7

3

6

MENU

12 00

AM

[

MENU

]

:

END

SETUP MENU

CLOCK SET

AUTO DATE

LTR SIZE

DEMO MODE

SETUP MENU

––

:

––

:

––

RETURN

[

MENU

]

:

END

CLOCK SET

AUTO DATE

LTR SIZE

DEMO MODE

SETUP MENU

12 00

AM

[

MENU

]

:

END

RETURN

CLOCK SET

AUTO DATE

LTR SIZE

DEMO MODE

SETUP MENU

530

PM

[

MENU

]

:

END

RETURN

CLOCK SET

AUTO DATE

LTR SIZE

DEMO MODE

SETUP MENU

5:30:00

PM

[

MENU

]

:

END

RETURN

CLOCK SET

AUTO DATE

LTR SIZE

DEMO MODE

LANGUAGE

LANGUAGELANGUAGE

JAN

12001

JUL

42001

JUL

4 2001

JAN

12001

12 00

AM

JAN

12001

Step 2 Setting the date and time

Set the date and time settings when you use your camcorder for the first time.

If you do not use your camcorder for about 4 months, the date and time settings may be

released (bars may appear) because the built-in rechargeable lithium cell in your

camcorder will have been discharged.

First, set the year, then the month, the day, the hour and then the minute.

(1) While your camcorder is in CAMERA mode, press MENU to display the

menu.

(2) Turn the SEL/PUSH EXEC dial to select

, then press the dial.

(3) Turn the SEL/PUSH EXEC dial to select CLOCK SET, then press the dial.

(4) Turn the SEL/PUSH EXEC dial to adjust the desired year, then press the dial.

(5) Set the month, day and hour by turning the SEL/PUSH EXEC dial and

pressing the dial.

(6) Set the minute by turning the SEL/PUSH EXEC dial and pressing the dial by

the time signal. The clock starts to move.

(7) Press MENU to make the menu disappear. The time indicator appears.

18

To check the preset date and time

Press DATE to display the date indicator.

Press TIME to display the time indicator.

Press DATE (or TIME) and then press TIME (or DATE) to simultaneously display the

date and time indicator.

Press DATE and/or TIME again. The date and/or time indicator disappears.

The year changes as follows:

Auto date function

When you use your camcorder for the first time, turn it on and reset the date and time

to your local time before you start recording (p. 17). The date is automatically recorded

for 10 seconds after you start recording (Auto date function). This function works only

once a day.

Note on the time indicator

The internal clock of your camcorder operates on a 12-hour cycle.

•12:00 AM stands for midnight.

•12:00 PM stands for noon.

Note on the auto date function

You can change the AUTO DATE setting by selecting ON or OFF in the menu settings.

The auto date function automatically displays the date once a day.

However, the date may automatically appear more than once a day if:

– you reset the date and time.

– you eject and insert the tape again.

– you stop recording within 10 seconds.

– you set AUTO DATE to OFF once and set it back to ON in the menu settings.

Step 2 Setting the date and time

1995 T · · · · t 2001 T · · · · t 2079

19

Getting started

When you want to record in the Hi8 system, use Hi8 video cassettes .

(1) Prepare the power supply (p. 11).

(2) Open the lid of the cassette compartment, and press EJECT. The cassette

compartment opens automatically.

(3) Insert a cassette with its window facing out and the write-protect tab on the

cassette up.

(4) Close the cassette compartment by pressing the

mark on the cassette

compartment. The cassette compartment automatically goes down.

(5) Close the lid of the cassette compartment.

To eject a cassette

Follow the procedure above, and eject the cassette in step 3.

Note

•Do not press the cassette compartment down. Doing so may cause a malfunction.

•The cassette compartment may not be closed when you press any part of the cassette

compartment other than the mark.

•Do not pick up your camcorder by holding the lid of the cassette compartment.

To prevent accidental erasure

Slide the write-protect tab on the cassette to expose the red mark.

Step 3 Inserting a cassette

2 3

4,5

EJECT

20

Your camcorder automatically focuses for you.

(1) Remove the lens cap by pressing both knobs on its sides and attach the lens

cap to the grip strap.

(2) Install the power source and insert a cassette. See “Step 1” to “Step 3” for more

information (p. 11 to 19).

(3) Set the POWER switch to CAMERA while pressing the small green button.

Your camcorder is set to the standby mode.

(4) Open the LCD panel while pressing OPEN. The viewfinder automatically

turns off.

(5) Press START/STOP. Your camcorder starts recording. The REC indicator

appears. The camera recording lamp located on the front of your camcorder

lights up. To stop recording, press START/STOP again.

The recording lamp lights up in the viewfinder when you record with the

viewfinder.

— Recording – Basics —

Recording a picture

5

3

1

2

40min

REC

0:00:01

PLAYER

POWER

OFF

CAMERA

(

CHARGE

)

PLAYER

POWER

OFF

CAMERA

(

CHARGE

)

4

Camera

recording

lamp

Microphone

La pagina sta caricando ...

Sony CCD-TRV49 Manuale utente

Sony CCD-TRV49 Manuale utente

in altre lingue

Documenti correlati

Altri documenti