Vertical IP2007 Quick Reference Manual

Vertical
Marca
Vertical
Modello
IP2007
Categoria
Accessori per cuffie / auricolari
Tipo
Quick Reference Manual

Questo manuale è adatto anche per

6
Quick Reference Guide
No. Item Function
1 Speaker The Speaker is used for handsfree
dialing and conversation.
2 Headset
Port
The RJ-9 / 2.5mm jack is on the
bottom left side of your IP phone.
3 Graphic
LCD
The LCD Screen displays your phone
settings, a phone number, or status
of a call.
4 Message
Wait Light
The Message LED flashes when you
receive a new message.
IP2007 Phone
for Xcelerator IP Systems
9
10
8
12
7653 421
13
2
11
IP Phone Keys & Features
5 The 4 Soft Keys are used to select
menu items and to control the LCD
screen. Each key’s function depends
on the corresponding content
displayed on the LCD.
6 The OK/Checkmark (
9) on the
Navigator Control key is used to
confirm a setting for your IP phone,
or the phone number you dialed.
7 The arrows () on the
Navigator Control key are used to
scroll to items on the LCD screen.
8 The 1, 2, 3, 4 keys are used to
select a CO line or Trunk Group.
9 The SPEAKER key is used to
activate/de-activate the handsfree
dialing or talking feature.
10 The MUTE key is used to activate/
de-activate the voice transmission
from your IP phone.
11 The HEADSET key is used to
activate/de-activate a Headset.
12 The XFR key is used to transfer a
call to another IP phone.
The REDIAL key is used to redial
the last number you dialed.
The HOLD key is used to place the
current call on hold. Pressing the
HOLD key again will return the caller
to the original conversation.
The MESSAGE key is used to access
the Voice Mail system to retrieve
your voice messages.
The CONFERENCE key is used to
establish a conference call.
- Pressing the Conference key will
place the current call on hold and
allow you to dial a 2nd number.
- Pressing the Conference key
again will return the caller to the
original conversation.
The PHONEBOOK key is used to
access your Phonebook. The LCD
screen will prompt you to: 1) place
a call to a previously stored number
or, 2) edit your Phonebook entries.
No. Item Function
13 The VOLUME CONTROL key is
used to control the volume.
- When phone is idle -- the Ringer
volume can be adjusted.
- When talking -- the volume for
the Handset/Speaker/Headset
can be adjusted.
CALL FORWARD
(via Auto Attendant) È
Busy Call Fwd *22 + Extension number
*22 + * + VM PSWD + * +
outside phone number
To cancel … **22
Direct Call Fwd *21 + Extension number
*21 + * + VM PSWD + * +
outside phone number
To cancel … **21
Direct Call Fwd to VM *24
To cancel … **24
No Answer Call Fwd *23 + Extension number + * +
Time
*23 + * + VM PSWD + * +
outside phone number + Time
To cancel … **23
Do Not Disturb
(Auto Attendant)
*4
To cancel … **4
Call Waiting
(Auto Attdnt & Phone)
*98
To cancel … **98
Page Allow/Deny
(Phone)
*99
To cancel … **99
Phone Lock/Unlock
(Phone)
*97 + VM PSWD
To cancel … **97 + VM PSWD
Trunk/Group
Programming (Phone)
*70 + Trunk/Group No. (1-4)
No. Item Function
Feature Access Codes
All manuals and user guides at all-guides.com
all-guides.com
LED Color Status Description
Message
Indicator
Off No new message
RED
Flashing New voice
message indication
1,2,3,4
VoIP Line
Keys
Off No active line,
phone is on-hook
GREEN
Steady Line is active when
dialing, or during a
call
Flashing Incoming call while
you are engaged in
another call
Speaker Key
Off Speaker is not in
use
GREEN
Steady While in on-hook
dialing mode or
hands-free mode
MUTE Key
Off Microphone is
active
RED
Steady Microphone is
inactive
Headset Key
Off Headset is not in
use
GREEN
Steady While in on-hook
dialing mode or
hands-free mode
and headset
All LEDs for
system status
Off In normal
operation mode
GREEN
Steady During system
boot
Flashing When system boot
fails, or a critical
error occurs
LED Status for IP Phone
No. Item Description
1 Reset Button resets your IP phone to
the factory default settings.
2 Link/ACT LEDs indicate link/activity status
of WAN and LAN ports.
3 WAN Port RJ-45 Jack 100/10Mbps Ethernet
port for connecting to IP network.
4 LAN Port RJ-45 Jack 100/10Mbps Ethernet
port for connecting to PC or
Notebook.
5 Power Jack If a power source from an
adaptor is required, use the
standard power adaptor provided
(5VDC/2000mA).
6 Power Source
(optional)
This switch is only available on
phone models supporting PoE.
There are two available sources
for power:
- Power Adaptor
- PoE (Power over Ethernet)
Set to the appropriate option
before installing your IP Phone.
Default setting = Power Adaptor
NOTE: Only the Ethernet WAN
port supports PoE.
IP Phone Connections
1 2 3 4 5 6
P/N: 7551-00Published: March 2007
Function Operation
Making
a call
1. Pick up the handset.
You will hear a dial tone.
2. Use the keypad to dial
a phone number.
NOTE: To delete the last
digit entered, use the
“Backsp” softkey.
3. Hang up the handset to
end the conversation.
Receiving
a call
1. Pick up the handset
when the phone rings.
2. Hang up the handset to
end the conversation.
Calling last
number dialed
1. Pick up the handset.
2. Press the REDIAL key.
The last number dialed will
automatically be redialed.
Transferring
a call
(Blind Transfer)
1. During a conversation,
press the TRANSFER key.
2. Use the keypad to dial
the desired phone number.
3. The call will transfer
automatically; hang up the
handset.
Adjusting
voice volume
During a conversation …
if the volume is too low or
too high, press the
VOLUME CONTROL key to
adjust softness/loudness.
Muting the
microphone
1. During a conversation,
press the MUTE key to
prevent other party from
hearing other discussions.
2. Press the MUTE key
again to re-establish a
two-way conversation.
Basic Call Features
-
All manuals and user guides at all-guides.com
  • Page 1 1
  • Page 2 2

Vertical IP2007 Quick Reference Manual

Vertical
Marca
Vertical
Modello
IP2007
Categoria
Accessori per cuffie / auricolari
Tipo
Quick Reference Manual
Questo manuale è adatto anche per
Scarica il pdf
rapporto

in altre lingue

Documenti correlati

Altri documenti