Philips DECT5251S/69 Manuale utente

Quick start guide

1

Quick start guide

Answer/end a call

Make a call

Redial a number

Call from phonebook

Add a name in the phonebook

Adjust the earpiece volume during a call

Adjust the handset loudspeaker volume

Mute and unmute the microphone

Read Call log

Read an event

Set the date and time

Set the handset external ring tone

Activate/deactivate the answer machine

Transfer a call/Intercom (if there are

at least 2 handsets)

Predial number & or and dial number

Press and browse and .

Press , browse through the list and

Predial number and press scroll to

Store and press , enter the name and press

.

Use the or keys to increase or decrease the

volume.

During a handsfree call, use the or keys to

increase or decrease the volume.

During a call press to select Options, press

to select Mute. Press to select End mute

Press to enter the carousel, browse to

reach

Sounds and press , press to select Handset

ring tones. Press to select External ring tone

Browse through the list to hear the ring tones and press to

select your ring tone

Press to enter the carousel, browse to

reach

Handset and press , scroll to Date and time and

press . Press to select Set date and enter the current

date, press . Scroll to Set time and enter the current time,

press

.

Press to select View

Press and browse .

Press + number phone

Press on the base station to switch the answer

machine ON or OFF

The LEFT & RIGHT keys allow you to browse through the menus and submenus.

Press to select a menu or an option and validate a setting.

Press to answer a call; Press to end a call.

DECT521_SGP_part1.qxd 11.03.2005 12:09 Seite 1

Configuration mode

2

Thank you for choosing Philips for your home communications.

Before using your DECT 521/525 we invite you to configurate it according to the country you

live in.

Configuration mode for Singapore / South Africa

Install the batteries.After a few minutes of charge, the configuration screen appears.

Press and scroll to browse through the different countries.

Press to select the configuration that suits you.

Your phone is ready to be used.

See page 54 if you need to re-configurate you DECT 521/525.

DECT521_SGP_part1.qxd 11.03.2005 12:09 Seite 2

DECT 521/DECT 525 handset

3

Phonebook / Right key

- Press to access the phonebook

from idle mode.

- Press to move through the menus

and options in menu screen.

Loudspeaker*

- Short press to take the line or to

activate the handset loudspeaker

during a call

Keypad lock & Editing

- Short press to insert *

- Long press to lock/unlock the

keypad in idle mode

- Long press to insert R (in

between-digit pause) when dialling

- Long press to enter multitap

system or Eatoni

®

editor when

entering text

- A short press to change the

letter when editing in Eatoni

®.

Alarm clock

- A short press to dial 0

- A long press to activate/deactivate

the alarm clock

Do not disturb & case mode

- Short press to insert # when

dialling

- Long press to activate/deactivate

the “Do Not Disturb” mode

- Long press to insert a pause (P)

when dialling

- Press to switch case mode when

editing

Clear/Recall

- Short press to correct a digit

when predialling or a character

when editing

- Short press to go back one menu

when browsing through the menus

- Short press to use operator

services during a call

- Long press to delete several digits

or a whole text in once

- Long press to return to idle

mode when browsing through the

menus

Talk key

- Press to make or answer a call

Earpiece

Microphone

Call transfer/Intercom

- Short press to initiate or cancel

internal call

- Short press during internal call to

transfer the call or switch between

internal call and External call

- Short press to answer an internal

call or to release an internal call

DECT 521/DECT 525

Handset

*Warning : Handsfree activation could suddenly increase the volume in the earpiece to a very

high level. Make sure the handset is not too close to your ear.

End key

- Press to end a call

OK key

- Press to enter the carousel menu

- Press to validate your choice

Call log / Left key

- Press to access the call log from

idle mode.

- Press to move through the menus

and options in menu screen.

DECT521_SGP_part1.qxd 11.03.2005 12:09 Seite 3

Icons on the handset display

4

Icons on the handset display

The display gives information about the operation of your telephone

The answer machine is activated (DECT 525). When blinking, this symbol

indicates that there is a new message on the answer machine or on the

operator voice mailbox. When fast blinking it shows that the answer

machine is full.

When charging, the battery bars scroll from empty to full status.

When the handset discharges, the battery shows the status :

Full , 2/3 , 1/3

and empty .

An internal call is in progress. When blinking, this symbol indicates that there

is an incoming internal call.

The handset loudspeaker is activated. When blinking, this symbol shows that

the base loudspeaker is activated (only for DECT 525).

The ring tone is deactivated.

The SMS function is activated. When blinking, this symbol indicates that a

new SMS has been received. When fast blinking, it indicates that the SMS

memory is full.

The handset is registered and in range of the base. When blinking, this symbol

indicates that the handset is not registered to the base.

An external call is in progress. When blinking, this symbol indicates that

there is an incoming external call in progress or that the line is already busy.

On first use, it is sometimes necessary to wait for a few minutes of charge before seeing icons

on the display.

DECT521_SGP_part1.qxd 11.03.2005 12:09 Seite 4

DECT 521/DECT 525 base stations

5

Paging key

The paging key enables you to locate a missing handset. Press the key until the handset starts

to ring. Once retrieved, press any key on the handset to end paging.

Delete key

Short

press to delete current

message

Long press to delete all the

messages (except unread ones)

ON/OFF key

Press to switch the answer

machine ON or OFF

Play/Stop key

Short press to play new

message

Short press to stop a message

while listening to it

Skip/Fast forward key

Short press to go to the next

message while listening

Long press to fast forward the

current message while listening

Paging key

Press to locate all handsets

New message

indicator

When blinking, it indicates

that there is a new message.

When fast blinking, it indicates

that the answer machine

memory is full.

Base station DECT 525

Base station DECT 521

Loudspeaker (only for ring tones

and answerphone messages)

DECT521_SGP_part1.qxd 11.03.2005 12:09 Seite 5

Table of contents

6

Quick start guide 1

Configuration mode for Singapore 2

DECT 521 / DECT 525 handset 3

Icons on the handset display 4

DECT 521 / DECT 525 base stations 5

Table of Contents 6-7

Menu structure 8-12

Conformity, Environment and Safety 13

Declaration of conformity

Using GAP standard compliance 14

Installing the DECT 521/525

Unpacking your DECT 521 15

Unpacking your DECT 525 15

Installing the base station 16

Installing and replacing the batteries in the handset 16

Battery life and range 16

Introduction

Philips screen saver 17

Idle mode 17

Understanding the menu system 17

How to navigate in the menus 17

Basic principles 18

In-call features 19

Editing systems 20-21

SMS

Send new SMS 22

Read SMS 23

SMS settings 25

Handset

Babysit mode 27

Registration 27

Rename handset 28

Language 28

Date & time 28

Display contrast 29

Backlight 29

Screen saver 29

Table of contents

DECT521_SGP_part1.qxd 11.03.2005 12:09 Seite 6

Table of contents

7

Answer machine

Saved messages 30

Outgoing messages 32

Answerphone settings 32

Record and listen to a memo 36

Intercom

Internal call 37

Call transfer 37

Conference call 38

Babysit mode 38

Phonebook

Add new 39

Call log

Delete all 44

Call log settings 44

Network 45

Extra

Call duration 46

Alarm clock 46

“Do Not Disturb” mode 47

Sounds

Handset ring tones 48

Base ring tones 48

Group ring tones 49

Handset ring tone volume 49

Base ring tone volume 49

Record personal melody 50

Settings 51

Base

Enable registration 53

Line settings 53

Service code settings 55

FAQ 56-57

Troubleshooting 58-59

Index

DECT521_SGP_part1.qxd 11.03.2005 12:09 Seite 7

Menu structure

8

SMS

Send new SMS

Send SMS to phone

View number

Reply

Forward

Send again

Delete SMS

Copy to phonebook

Call

Read SMS

SMS Settings

Mode

SMS centre

Handset

Babysit mode

Registration

Rename handset

Date & time

Display contrast

Backlight

Screen saver

Register handset

On or Off

Enter name

Set date

Levels (1 to 5)

Off / 10s / 20s

Set time

Enter RC code

On or Off

Un-register handset

Menu structure

Menu

By using the left and right keys, you can scroll through the menus.

Base selection

Language

DECT521_SGP_part1.qxd 11.03.2005 12:09 Seite 8

Menu structure

9

Call all

Handset list

Intercom

Change code

Answerphone settings

Mode

On or Off

Toll saver / 3 / 5 / 7

Rings before answer

Voice language

Off/Low/Medium/

High/Boost

Call screening

Recording quality

Answer and record

with personalised OGM

Answer only with

personalised OGM

Answer and record

with predefined OGM

Answer only with

predefined OGM

High / Standard

Mode (On or Off)

Remote control

Play

Next message

Previous message

Call

Delete

Store

Send SMS

Answer machine

Saved messages

Record a memo

Outgoing messages

Answ. machine mode

Record outgg msg

Standard OGM for

answ. & record mode

Standard OGM for

answer mode only

Group A

Play/Record new

Delete

Group B

Group C

DECT521_SGP_part1.qxd 11.03.2005 12:09 Seite 9

Menu structure

10

Network

Call forward

Cancel call forward

Call forward when

line busy

Call forward when

unanswered

Voice mail

Cancel call back

Withhold identity

Cancel call forward

when line busy

Cancel call forward

when unanswered

All calls

No call

Call log

View

Delete all

Call log settings

Incoming calls

Outgoing calls

All calls

Unanswered calls only

Calls with answer

machine message only

View

Add new

Phonebook

Call

Change number

Change name

Select group

A / B / C

Delete

Send SMS

Play

Call

View number

Store

Delete

Send SMS

No call*

*DECT 521 only

DECT521_SGP_part1.qxd 11.03.2005 12:09 Seite 10

Menu structure

11

Extra

Call duration

Alarm clock

Do Not Disturb

mode

Activation

Set day

Start time

Stop time

Allowed caller choice Standard / A / B / C

Activation On or Off

On or Off

A / B / C

Ring tones

Ring tone volume

Low/Medium/High

Set day

Set time

Settings

Base loudspeaker

volume*

Earpiece tone

Key & feedback tones

Notification beep

Music on hold

Sounds

Handset ring tones

Handset ring tone

volume

Base ring tone

volume*

Base ring tones*

Group ring tones

External ring tone

Internal ring tone

Ring tone list

Record pers.

melody*

Play

Record new

Delete

* only available for DECT 525

DECT521_SGP_part1.qxd 11.03.2005 12:09 Seite 11

Menu structure

12

Base station

Enable registration

Line settings

Service code settings

Short flash / Long flash

Dial mode

Tone / Pulse

Recall type

Choose country/oper.

On or Off

First ring*

* only available in Singapore

DECT521_SGP_part1.qxd 11.03.2005 12:09 Seite 12

Conformity, Environment and Safety

13

Safety information

This equipment is not designed to make emergency calls when the power fails.An alternative

has to be made available to allow emergency calls.

Conformity

This product can only be connected to the analogue telephone network of Singapore, South

Africa,Turkey and Russia.

Power requirements

This product requires an electrical supply of 220-240 volts, alternating monophased power,

excluding IT installations defined in standard EN 60-950. In case of power failure, the

communication can be lost.

Warning !

The electrical network is classified as hazardous according to criteria in the standard EN 60-

950.The only way to power down this product is to unplug the power supply from the

electrical outlet. Ensure the electrical outlet is located close to the apparatus and is always

easily accessible.

Telephone connection

The voltage on the network is classified as TNV-3 (Telecommunication Network Voltages), as

defined in the standard EN 60-950.

Safety precautions

Do not allow the handset to come into contact with water. Do not open the handset or the

base station.You could be exposed to high voltages. Do not allow the charging contacts or the

battery to come into contact with conductive materials.

Environmental care

Please remember to observe the local regulations regarding the disposal of your packaging

materials, exhausted batteries and old phone and where possible promote their recycling.

Conformity, Environment and Safety

DECT521_SGP_part1.qxd 11.03.2005 12:09 Seite 13

Declaration of conformity

14

Philips has marked the battery and packaging with standard symbols designed to promote the recycling and appropriate

disposal of your eventual waste.

A financial contribution has been paid to the associated national recovery & recycling system.

The labelled packaging material is recyclable.

DECT

TM

is a Trade Mark of ETSI registered for the benefit of the implementers of the DECT technology.

We,

PHILIPS Consumer Electronics

Route d'Angers

72081 Le Mans Cedex 9

France

Declare that the products DECT521xx and DECT525xx are in compliance with ANNEX III of

the R&TTE-Directive 1999/5/EC and then with the following essential requirements:

Article 3.1 a : (protection of the health & the safety of the user)

Safety : EN 60950-1 (10/2001)

SAR : EN 50371 (2002)

Article 3.1 b : (protection requirements with respect to electromagnetic compatibility)

EMC : ETSI EN 301 489-6 V1.2.1 (08/2002) & ETSI EN 301 489-1 V1.4.1 (08/2002)

Article 3.2 : (effective use of the radio spectrum)

Radio : EN 301 406 V1.5.1 (2003)

The presumption of conformity with the essential requirements regarding Council Directive

1999/5/EC is ensured.

Date : 04/03/2005 Le Mans

Product Quality Manager

Home Communication

Using GAP standard compliance

The GAP standard guarantees that all DECT

TM

GAP handsets and base stations comply with a

minimum operating standard irrespective of their make.Your DECT 521/525 handset and base

station are GAP compliant, which means the minimum guaranteed functions are : register a

handset, take the line, receive a call and dial.The advanced features may not be available if you

use another handset than a DECT 521/525 with your base station.

To register and use your DECT 521/525 handset with a GAP standard base station of a

different make, first follow the procedure described in the manufacturer’s instructions, then

follow the procedure page 27.

To register a handset from another make to the DECT 521/525 base station, place the base

station into registration mode (page 27), then follow the procedure in the manufacturer’s

instructions.

Declaration of conformity

DECT521_SGP_part1.qxd 11.03.2005 12:09 Seite 14

Installing the DECT521/525

15

Installing the DECT 521/525

Unpacking your DECT 521

P

H

I

L

I

P

S

One DECT 521 base station One DECT 521 handset

NiMh 2HR

AAA 650 mAh

rechargeable

batteries

NiMh 2HR

AAA 650 mAh

rechargeable

batteries

A user guide A guarantee

A power supply A line cord

The DECT 521 package contains:

Unpacking your DECT 525

P

H

I

L

I

P

S

One DECT 525 base station One DECT 525 handset

A user guide A guarantee

The DECT 525 package contains:

In DECT 521 and DECT 525 multi-handset packs, you will also find one or more additional

handsets, chargers with their power supply and additional rechargeable batteries.

DECT521_SGP_part1.qxd 11.03.2005 12:09 Seite 15

Installing the DECT521/525

16

Installing the base station

Situate your product close enough to the telephone and mains power sockets so that the cables will

reach.To properly install the base station, plug the line cord and the power cable into the base station.

Plug the cord and the cable into the wall.A beep indicates that the phone is properly installed (only

available for DECT 525). If you have a broadband DSL Internet Installation, please make sure you have

one DSL filter plugged directly on each line socket used in the house and check the modem and the

phone are plugged in the correct filter slot (one specific for each).

Warning ! The electrical network is classified as dangerous according to criteria in the standard EN 60-

950.The only way to power down this product is to unplug the power supply from the electrical outlet.

Ensure the electrical outlet is located close to the apparatus and is always easily accessible.

Please take care that the power supply and telephone line are connected to the correct sockets as

incorrect placement could damage your equipment.

Warning ! Always use the cables provided with the product.

Installing and replacing the batteries in the handset

To insert the batteries, open the battery cover, place the batteries as indicated and put the battery cover

back.When the handset is placed on the base station the 3 battery bars scroll (if charge is needed).Allow

the handset to charge for 24 hours to reach full charge. On first use it may be necessary to wait for a

few minutes before seeing symbols on the display.

In case you need to change the batteries, the following type is mandatory 2HR AAA NiMh 650 mAh.

Warning: the base station must always be plugged into the mains when charging or when in use. Always use

rechargeable batteries.

The warranty shall not apply to the batteries and any other components within limited lifetime and wear.

Connect the power supply

Do not insert anything in this opening

Battery life and range

Batteries should not be disposed of with general household waste.

Battery life in standby

mode

Battery life in

communication

Indoor range Outdoor range

up to 300 hours up to15 hours up to 50 metres up to 300 metres

Optimal battery life is reached after 3 cycles of complete charge & discharge.When reaching the range

limit and the conversation becoming crackly, move closer to the base.To reach optimal range, place the

base station away from electrical appliances.

Connect the telephone line cord

DECT521_SGP_part1.qxd 11.03.2005 12:09 Seite 16

Introduction

17

In idle mode, the DECT 521/525 display shows various information:

Understanding the menu system

Idle mode

Introduction

To access the carousel menu from idle mode, press .The carousel represents a

loop of icons that gives access to the different first level menus.

Scroll left or right to reach the desired menu and press

to select.

The sub menus are listed and represented by little squares at the bottom of

the display.To reach one particular sub-menu use the and keys and press

to validate your choice.

A “tick” shows the selected sub-menu or option.The shows the option you

are browsing.

Note: some menus are also directly accessible via a dedicated key on the keypad

like the Intercom with , the phonebook with and the call log with .

Philips screen saver

After 2 minutes of inactivity, the screen saver is displayed:

You can deactivate it (see p.29)

- The date & time, the name of the handset and the instructions to access

the menu.

- “Do Not Disturb” mode , and the alarm clock , if activated.

- Missed calls , new SMS or new messages (answer machine) or network voice-

mailbox message , if any.

To activate/deactivate these functions press or

How to navigate in the menus

Press to access the carousel menu

Scroll to Sounds, and press to select

Scroll to Handset ring tone vol. and press to select

The current level is heard, browse to hear other levels

Browse through the levels and select one with

DECT521_SGP_part1.qxd 11.03.2005 12:09 Seite 17

Basic principles

18

To store an SMS

To store a name from predial

Basic principles

To make and to answer a call

To call from the phonebook

Redial from call log

Press to directly access Phonebook

Choose a name in the list

Make the call or press to select Call in the options

Scroll to Store and press to select

Enter the name and press

Press to enter the options

Pre dialling

Dial the number

Direct dialling

Answer a call

When ringing

Dial the number

Make the call

Dial the number

Press the key

Take the line

Press to directly access Call log.

Choose an entry in the list

Make the call or press to select Call in the options

Scroll to Send SMS and press to select

Enter the text and press

Scroll to Store and press to select

Press to enter the options

Dial the number

DECT521_SGP_part1.qxd 11.03.2005 12:09 Seite 18

In call features

19

In call features

During an external call, some other options are available. Press to enter Options.

During an external call, you can use the intercom in-call option to call another handset and for

example transfer the call to this handset.

To mute the handset microphone

Intercom (available only if you have at least two handsets)

Press to enter Options

Press to activate or deactivate the handset loudspeaker

Press to increase or to decrease the volume when on line

Press to enter the options. Scroll to Phonebook or Call log and press to select

There are 5 volume levels available.The last setting is stored for the next calls.

If you subscribe to the Call waiting service, a beep in the earpiece informs you of a second

incoming call.The name or number of the second caller may be displayed if you also subscribe

to Caller Display service.To answer that second call, use + (according to your net-

work, the code may be different). Please contact your network provider for more details.

To switch the handset loudspeaker ON/OFF

Caller Line identification and Call waiting

To increase/decrease the handset & earpiece/loudspeaker volume during a call

To access the phonebook or the call log during an external call

Press again to resume the conversation (End mute)

Press to select Mute (the caller can no longer hear you)

Press to enter Options

If there is only one additional handset it rings automatically,

otherwise select a handset from the list.

Press Transfer when the second handset has taken the line.

Scroll to Record and press to select

Scroll to Intercom (the caller can no longer hear you)

Other options are available such as Switch and Conference call (see page 38).

To listen to the conversation, go to the call log menu or the messages list by pressing the call

log key.

To record a conversation (DECT 525 only)

Press to enter Options

Warning : Handsfree activation could suddenly increase the volume in the earpiece to a very

high level. Make sure the handset is not too close to your ear.

DECT521_SGP_part1.qxd 11.03.2005 12:09 Seite 19

La pagina sta caricando ...

Philips DECT5251S/69 Manuale utente

Questo manuale è adatto anche per

Philips DECT5251S/69 Manuale utente

in altre lingue

Documenti correlati

Altri documenti