dji Camera Exporter Guida utente

Marca: dji

Modello: Camera Exporter

Tipo: Guida utente

Questo manuale è adatto anche per

SAFETY GUIDELINES

AND DISCLAIMER

2017.10V1.4

Series

Searching for Keywords

Search for keywords such as “battery” and “install” to find a topic. If you are using Adobe

Acrobat Reader to read this document, press Ctrl+F on Windows or Command+F on Mac to

begin a search.

Navigating to a Topic

View a complete list of topics in the table of contents. Click on a topic to navigate to that

section.

Printing this Document

This document supports high resolution printing.

Contents

Safety at a Glance

NOTICE

Glossary

Pre-ight Checklist

Disclaimer and Warning

Before You Begin

Individual Parts

Regarding Genuine and Functional Parts 8

Remote Controller 8

Camera 9

Gimbal 9

Compass 10

Propulsion Systems 10

App 11

Firmware 12

Product Care

Storage and Transportation 12

Maintenance and Upkeep 13

Flight Condition Requirements

Weather Conditions and Surrounding Environment 13

Interference with Flight Controller, Communications, and Positioning Systems 14

Operating the Aircraft Responsibly 14

Flight Modes, Functions and Warnings

Flight Modes 15

Failsafe and Return to Home 16

Low Battery 16

Transformation Function 16

Vision Positioning System 17

Compliance with Regulations & No-Fly Zones

Regulations 17

No-Fly Zones 18

Compliance Information

Safety at a Glance

1. Environmental Considerations

• Always y at locations that are clear of building and other

obstacles.

• DO NOT y above or near large crowds.

• Avoid ying at altitudes above 400 feet (120 m).

• Be very careful when ying 14,700 feet (4,500 m) or more above

sea level.

• Fly in moderate weather conditions with temperatures between

32° to 104° F (0° to 40° C).

2. Pre-ight Checklist

• Ensure the remote controller and aircraft batteries are fully charged.

• Ensure the propellers are in good condition and securely tightened.

• Ensure there is nothing obstructing the motors.

• Check that the camera lens is clean and free of stains.

• Only calibrate the compass when the DJI GO app or the status indicator prompt you to do so.

3. Operation

• Stay away from the rotating propellers and motors.

• Maintain line of sight of your aircraft at all times

• DO NOT perform the Combination Stick Command when the aircraft is in midair.

• DO NOT answer incoming calls during ight.

• DO NOT y under the inuence of alcohols or drugs.

• During the Return-to-Home procedure, you can adjust the altitude to avoid obstacles.

• DO NOT y closely above reective surfaces such as water or snow, as these terrain may affect the

performance of the Vision Positioning System.

• In the instance of a Low Battery Warning, land the aircraft at a safe location.

• Always keep your hands on the remote controller so long as the motor is still spinning. Power off the

aircraft before turning off the remote controller after landing.

4. Maintenance and Upkeep

• DO NOT use aged, chipped or broken propellers.

• Recommended storage temperature: between 71° and 82° F (22° and 28° C).

• Refer to the

Intelligent Flight Battery Safety Guidelines

for more information about the safe use of the

battery.

5. Observe Local Laws and Regulations

• DO NOT y in the No Fly Zones. You can nd a complete list of these areas at http://ysafe.dji.com/

• The DJI No Fly Zone is not a replacement for local government regulations or good judgment.

• Avoid ying in areas where rescue teams are actively using the airspace.

The Inspire

1 aircraft

is NOT a toy and is not

suitable for children

under the age of 18.

Note that ‘Safety at a Glance’ only

provides a quick overview of the

safety tips. Make sure you read

and understand the remaining

sections of this document.

Fly in Open Areas Strong GPS Signal Maintain Line of Sight Fly Below

400 feet (120 m)

Avoid ying over or near obstacles, crowds, high voltage power lines, trees or bodies of water.

DO NOT y near strong electromagnetic sources such as power lines and base stations as it may affect the onboard

compass.

≥

10m/s

DO NOT use the aircraft in adverse weather conditions such as rain, snow, fog and

wind speeds exceeding 10 m/s or 22 mph.

Stay away from the rotating

propellers and motors.

No Fly

Zone

Learn more at:

http://ysafe.dji.com/no-y

NOTICE

All instructions and other collateral documents are subject to change at the sole discretion of SZ DJI

TECHNOLOGY CO., LTD. For up-to-date product information, visit http://www.dji.com and click on the

Inspire 1 series product page.

Glossary

The following terms are used throughout the product literature to indicate various levels of potential harm

when operating this product:

NOTICE: Procedures, which if not properly followed, create a possibility of physical property

damage AND a little or no possibility of injury.

CAUTION: Procedures, which if not properly followed, create the probability of physical property

damage AND a possibility of serious injury.

WARNING: Procedures, which if not properly followed, create the probability of property

damage, collateral damage, and serious injury OR create a high probability of supercial injury.

Read the ENTIRE user manual to become familiar with the features of

this product before operating. Failure to operate the product correctly

can result in damage to the product or personal property and cause serious injury.

This is a sophisticated product. It must be operated with caution and common sense and

requires some basic mechanical ability. Failure to operate this product in a safe and responsible

manner could result in injury or damage to the product or other property. This product is not

intended for use by children without direct adult supervision. Do not use with incompatible

components or alter this product in any way outside of the documents provided by SZ DJI

TECHNOLOGY CO., LTD. These Safety Guidelines contain instructions for safety, operation and

maintenance. It is essential to read and follow all of the instructions and warnings in the user

manual, prior to assembly, setup or use, in order to operate the product correctly and avoid

damage or serious injury.

Age Recommendation: Not for children under the age of 18. This is not a toy.

Pre-ight Checklist

1. Ensure that you are using only genuine parts and that all parts are in mint condition.

2. Ensure the remote controller, Intelligent Flight Battery, and mobile device are fully charged.

3. Ensure that there is no foreign object stuck to the camera lens, the micro-SD card has been inserted

into the camera, and the gimbal can rotate freely before powering it on.

4. Ensure the propellers are securely mounted onto the motors, and the motors can start and function normally.

5. Follow the on-screen instructions to calibrate the compass.

6. Ensure the app and aircraft's rmware have been upgraded to the latest version.

7. Ensure that your flight area is outside the No-Fly Zones and flight conditions are suitable for flying the

aircraft.

8. Be sure that you are NOT ying under the inuence of alcohol, drugs or any substance that may impair

your cognitive abilities.

9. Be familiar with the selected ight mode and understand all safety functions and warnings.

10. Be sure to observe all local regulations, obtain appropriate authorizations, and understand the risks.

REMEMBER: It is solely your responsibility to comply with all ight regulations.

11. Choose an appropriate terrain when trying to use the Vision Positioning System to stabilize the

aircraft. Refer to the “Vision Positioning System” section in this document to lean more.

Disclaimer and Warning

This product is NOT a toy and is not suitable for children under the age of 18. Adults should keep the

aircraft out of the reach of children and exercise caution when operating this aircraft in the presence of

children.

This product is a ying camera that offers easy ight when in good working order as set forth below. Visit

http://www.dji.com for the most current instructions and warnings and http://knowbeforeyouy.org/ for

more information about ight safety and compliance.

The information in this document affects your safety and your legal rights and responsibilities. Read

this entire document carefully to ensure proper conguration before use. Failure to read and follow the

instructions and warnings in this document may result in product loss, serious injury to you, or damage to

your aircraft.

By using this product, you hereby signify that you have read this disclaimer carefully and that you

understand and agree to abide by the terms and conditions herein. You agree that you are solely

responsible for your own conduct while using this product, and for any consequences thereof. You agree

to use this product only for purposes that are proper and in accordance with all applicable laws, rules,

and regulations, including international and domestic airspace regulations, and all terms, precautions,

practices, policies and guidelines DJI has made and may make available.

DJI accepts no liability for damage, injury or any legal responsibility incurred directly or indirectly from the

use of this product. The user shall observe safe and lawful practices including, but not limited to, those

set forth in these Safety Guidelines.

Data Storage and Usage

When you use our mobile app or our products or other software, data regarding the use and operation

of the product, such as flight telemetry data (e.g., speed, altitude, battery life, and information about

the gimbal and camera) and operations records, may be automatically or manually uploaded to and

maintained on a DJI-designated server. The internal storage device incorporated into the product stores

various types of data, including ight telemetry data. You may also provide ight telemetry data and other

data to us when you manually transmit that information from the internal storage device to us.

The information that is automatically uploaded or manually uploaded to us does not include personal data

(i.e., your name, address, email, or other information that specically identies you), but personal data,

such as your user name, may become associated with, used to identify, or tagged to such uploaded

information when we store it. We separately describe how we use your user name and other personal

data on our privacy policy at http://www.dji.com/policy. By using the product, the mobile app or other

software we distribute, or by manually providing data to us, you consent to the following:

• Our storage of any flight telemetry data and other data uploaded or provided to us, including in

combination with your user name;

• Our use of any such data uploaded or provided (including your user name) in connection providing

support and services to you and to improve our products;

• Our disclosure of such data uploaded or provided (including your user name) to our agents and/or

contractors who may use it on our behalf or in connection with their relationship with us; and

• Our disclosure of such uploaded or provided data (including your user name) as required by law, in a

matter of public safety or policy, as needed in connection with the transfer of our business assets, or if

we believe in good faith that sharing the data is necessary to protect our rights or property.

DJI reserves the right to update this disclaimer and the Safety Guidelines. Please visit www.dji.com and check your email

periodically for the latest version. This disclaimer is made in various language versions; in the event of divergence among

different versions, the English version shall prevail.

Before You Begin

The following documents have been produced to help you safely operate and make full use of your

aircraft:

In the Box

Safety Guidelines and Disclaimer

Intelligent Flight Battery Safety Guidelines

Quick Start Guide

User Manual

Check all of the included parts listed in the

In the Box

document and read the

Safety Guidelines and

Disclaimer

before ight. Then prepare for your rst ight by using the

Quick Start Guide

and watching all

of the tutorial videos on DJI’s ofcial website (http://www.dji.com). If you have questions, refer to the

User

Manual

in the app or on DJI’s ofcial website for more comprehensive information. Make sure you fully

understand the functionality of each individual part, the ight condition requirements, the key contingency

warning functions/systems, and all government regulations before each ight. If you have any questions

or problems during the assembly, maintenance or use of this product, please contact DJI or a DJI

authorized dealer.

Individual Parts

Regarding Genuine and Functional Parts

To avoid component malfunction, serious injury, and property damage, observe the following rules:

1. Use only genuine DJI parts or parts certied by DJI. Unauthorized parts or parts from non-DJI

certied manufacturers may cause system malfunctions and compromise safety.

2. Ensure there are no foreign objects (such as water, oil, soil, sand, etc.) inside of the aircraft or

its components.

3. Ensure the aircraft and its components – including but not limited to the remote controller,

camera, gimbal, compass, propulsion system, and battery – are all in good working order,

damage-free, and functioning well. Refer to the remaining sections in this document for more

details on how to ensure the functionality of these components.

Remote Controller

1. Ensure the remote controller is fully charged before each ight.

2. If the remote controller is powered on and has NOT been used for 5 minutes, it will sound an alert. After 10

minutes it will automatically power off. Move the sticks or perform some other action to cancel the alert.

3. Adjust the clamp of the mobile device holder to allow a rm grip on your mobile device.

4. Ensure the mobile device holder is rmly in place and does not slip.

5. Ensure the antennas of the remote controller are unfolded and adjusted to the proper position to

achieve optimal transmission quality.

6. Repair or replace the remote controller if damaged. A damaged remote controller antenna will greatly

decrease performance.

7. Linking is required if you wish to replace your remote controller or receiver or add a new remote

controller. Refer to the User Manual for details.

8. A secondary remote controller cannot be linked with the aircraft and cannot control the aircraft’s ight.

You may congure it into a primary remote controller via the DJI app and then link it to the aircraft to

control ight.

9. For the GPS in the remote controller to function properly and the Dynamic Home Point to be accurate,

ensure the DJI logo is facing the sky and keep the remote away from any metal objects.

Camera

To avoid possible serious injury and property damage, observe the following rule:

Do NOT block any ventilation holes on the camera as the heat generated may hurt you and damage the

device.

1. Check camera settings before use to make sure you can adjust them to t your needs.

2. Test the camera by shooting a few test images and check that it is operating correctly before shooting

important pictures or videos.

3. Do NOT remove the micro-SD card from the camera when it is powered on.

4. Photos or videos cannot be transmitted or copied from the camera if the Intelligent Flight Battery is

powered off.

5. Be sure to power off the Intelligent Flight Battery correctly, otherwise your camera parameters will NOT

be saved and any recorded videos may be damaged. NOTE: Regardless of the reason, DJI will not be

responsible for any failure of an image or video to be recorded or having been recorded in a way that

is not machine readable.

Gimbal

1. Precision elements in the gimbal may be damaged in a collision or impact, which may cause the

gimbal to function abnormally.

2. Do NOT apply external force to the gimbal after the gimbal is powered on.

3. Do NOT add any payloads to the gimbal, as this may cause the gimbal to function abnormally or even

lead to motor damage.

4. Remove the gimbal clamp before powering on the gimbal. Re-install the gimbal clamp to secure the

gimbal’s position if you are going to store the aircraft for an extended period.

5. The gimbal and gimbal connector are very delicate. Handle with care and do NOT touch the gimbal

connector, as any damage will cause it to function abnormally.

6. Hold the gimbal rmly when detaching or reattaching it, so it does not drop.

Compass

To avoid possible serious injury and property damage, observe the following rule:

Land immediately when severe drifting occurs in ight, i.e., the aircraft does NOT y in straight lines.

Only calibrate the compass when the DJI GO app or the status indicator prompt you to do so. Observe

the following rules when calibrating your compass:

1. DO NOT calibrate your compass where there is a chance of strong magnetic interference, such as

magnetite, parking structures, and steel reinforcements underground.

2. DO NOT carry ferromagnetic materials with you during calibration such as cellular phones.

3. The DJI GO app will prompt you to resolve the compass issue if the compass is affected by strong

interference after calibration is complete. Follow the prompted instructions to resolve the compass

issue.

Propulsion Systems

To avoid serious injury to yourself or others, which may be caused by the rotating propellers and

motors, observe the following rules:

Propellers

1. Do NOT use aged, chipped, or broken propellers.

2. Always power off the aircraft before touching the propellers.

3. Be aware of the sharp edges of the propellers when mounting or removing the propellers. Wear

gloves or take other protective measures when touching the propellers.

4. Whenever necessary, use tools (e.g., wrench, screwdriver, pliers, etc.) to remove or install the

propellers.

5. Ensure the propellers are securely mounted to prevent them from falling off the motors.

6. Do NOT turn on the motors when propellers are mounted and there are other people or animals in

the immediate vicinity.

Motors

1. Ensure the motors are securely mounted and rotating smoothly.

2. Do NOT attempt to modify the structure of the motors.

3. Do NOT touch or let your hands or body come in contact with the motors after ight as they may

be hot.

To avoid possible serious injury and property damage, observe the following rules

1. Do NOT block any of the ventilation holes on the motors.

2. Do NOT block any of the ventilation holes on the frame arm of the aircraft.

Motors

1. Keep the motors free of dust.

2. If a motor is stuck and unable to rotate freely, execute the CSC (Combination Stick Command) to stop

the motors immediately.

Electronic Speed Controllers

Ensure the ESCs sound a normal tune when powered on.

App

1. Be sure to fully charge your tablet or mobile device before launching the app. A tablet is

recommended for a better user experience.

2. If you are using a phone as your mobile display device, be sure to continue ying safely when the

phone receives an incoming call. Do NOT accept phone calls during ight.

3. Read all prompted safety tips, warning messages, and disclaimers carefully. Be familiar with the

related regulations in your area. You are solely responsible for being aware of all relevant regulations

and ying in a way that is compliant.

a. Read and understand the warning messages before using the Auto-take off and Auto-land feature.

b. Read and understand the warning messages before re-setting your Home Point.

c. Read and understand the warning message and disclaimer before setting the altitude beyond the

regulatory limit.

d. Read and understand the warning messages and disclaimer before switching between the ights

modes.

4. Land your aircraft immediately if there is an alert shown on the app.

5. Examine and check all warning messages on the checklist displayed in the app prior to each ight.

6. Use the in-app simulator to practice your ight skills if you have never operated the aircraft or if you do

not have sufcient experience to be comfortable operating the aircraft.

7. Beginner Mode is enabled by default when you launch the app for the rst time. The aircraft’s altitude

and ight distance is restricted when ying in Beginner Mode. We recommend you y in Beginner

Mode to perfect your ight skills. Operate the actual aircraft only after you are condent that you have

mastered adequate ight skills.

8. Cache the map data of the area where you intend to y the aircraft by connecting to the Internet before

each ight.

Firmware

To avoid serious injury to children and animals, observe the following rule:

Keep children and animals at a safe distance during any rmware upgrade, system calibration, and

parameter setting procedures.

1. For safety, always update the rmware to the latest version when an upgrade notication is shown in

the app.

2. Firmware upgrade notications will inform about new rmware upgrades. You are required to read and

understand the information shown. You further understand and agree that the data including but not

limited to ight telemetry data and user selection records may be uploaded to and maintained on a

DJI-designated server.

3. Be sure to download the firmware package file from the official DJI website. Verify the firmware

package le’s integrity before upgrading.

4. Be sure to update the remote controller’s rmware to the latest version after you update the aircraft’s

rmware.

5. The remote controller may become unlinked from the aircraft after updating. Re-link the remote

controller and aircraft.

6. Be sure to check all connections and remove the propellers from the motors before performing the

rmware update.

7. Ensure there is only one rmware package le stored on your SD card.

8. Only storage devices that are formatted for FAT32 and exFAT le systems are supported for aircraft

and remote controller rmware updates.

Product Care

Storage and Transportation

To avoid serious injury to children and animals, observe the following rule:

Small parts, such as cables and straps, are dangerous if swallowed. Keep all parts out of reach of

children and animals.

1. Store the Intelligent Flight Battery and remote controller in a cool, dry place away from direct

sunlight to ensure the built-in LiPo battery does NOT overheat. Recommended storage temperature:

between 71° and 82° F (22° and 28° C) for storage periods of more than three months. Never store in

environments outside the temperature range of -68° to 113° F (-20° to 45° C).

2. Do NOT allow the camera to come into contact with, or become immersed in, water or other liquids. If

it gets wet, wipe dry with a soft, absorbent cloth. Turning on an aircraft that has fallen into water may

cause permanent component damage. Do NOT use substances containing alcohol, benzene, thinners

or other ammable substances to clean or maintain the camera. Do NOT store the camera in humid or

dusty areas.

3. Detach the gimbal from the aircraft when storing for a long period of time or transporting over long

distances. Also replace the Gimbal Clamp and Gimbal Cover when storing.

4. Do NOT connect this product to any USB interface that is older than version 2.0. Do NOT connect this

product to any "power USB" or similar devices.

Maintenance and Upkeep

1. Check every part of the aircraft after any crash or violent impact. If you have any problems or

questions, please contact a DJI authorized dealer.

2. Regularly check the Battery Level Indicators to see the current battery level and overall battery life.

When the battery life reaches 0%, it can no longer be used.

3. For Inspire 1 series, it’s recommended service it after every 50 hours of ight time, in order to keep the

aircraft working properly.

Flight Condition Requirements

Weather Conditions and Surrounding Environment

The aircraft is designed to operate in good to moderate weather conditions. To avoid collision,

serious injury and property damage, observe the following rules:

1. Do NOT use the aircraft in severe weather conditions. These include wind speeds exceeding 10

m/s, snow, rain, smog, heavy wind, hail, lightning, tornadoes or hurricanes.

2. Keep the aircraft at least 30 feet (10 meters) away from obstacles, people, animals, buildings,

public infrastructure, trees, and bodies of water when in ight. Stay even further away from the

above objects as your altitude increases.

3. Be EXTRA cautious when operating the aircraft indoors.

4. Be sure to enable the Vision Positioning System when ying indoors. Note that the Vision

Positioning System may NOT work properly when it is ying over water, over surfaces without

a clear pattern, or in a low light environment.

1. Aircraft and battery performance is subject to environmental factors such as air density and

temperature.

a. The max service ceiling altitude is 14,700 feet (4,500 m) above sea level. Near this limit, the battery

and aircraft performance will be reduced, and you should y with extra caution.

b. It is not recommend to operate the aircraft store in environments outside the temperature range of

-68° to 113° F (-20° to 45° C).

2. Do NOT use the aircraft near accidents, re, explosions, oods, tsunamis, avalanches, landslides,

earthquakes, dust, or sandstorms.

Interference with Flight Controller, Communications, and Positioning Systems

1. Fly in open areas. Tall buildings or steel structures may affect the accuracy of the on-board compass

and block the GPS signal.

2. Avoid interference between the remote controller and other wireless equipment. Make sure to turn off

the Wi-Fi on your mobile device.

3. Do NOT fly near areas with magnetic or radio interference. These include but are NOT limited to:

high voltage lines, large scale power transmission stations or mobile base stations and broadcasting

towers. Failing to do so may compromise the transmission quality of this product or cause remote

controller and video transmission errors which may affect ight orientation and location accuracy. The

aircraft may behave abnormally or go out of control in areas with too much interference.

Operating the Aircraft Responsibly

To avoid serious injury and property damage, observe the following rules:

1. Make sure you are NOT drunk, taking drugs, under the inuence of anesthesia, or suffering from

dizziness, fatigue, nausea or any other conditions, whether physical or mental, that could impair

your ability to operate the aircraft safely.

2. Do NOT perform the Combination Stick Commands when aircraft is in midair, otherwise the

motors will stop.

3. Upon landing, power off the aircraft rst, then switch off the remote controller.

4. Do NOT drop, launch, re or otherwise project any dangerous payloads on or at any buildings,

persons or animals, or which could cause personal injury or property damage.

1. Make sure you have been sufciently trained and are fully aware of any contingency plans before

accidents happen.

2. Make sure you have a ight plan and never y the aircraft recklessly.

3. Respect the privacy of others when using the camera. Make sure you comply with local privacy laws,

regulations, and moral standards.

4. Do NOT use this product for any reason other than general personal use. Do NOT use it for any illegal

or inappropriate purpose (such as spying, military operations, or unauthorized investigations).

5. Do NOT use this product to defame, abuse, harass, stalk, threaten or otherwise violate the legal rights

(such as the right of privacy and publicity) of others.

6. Do NOT trespass into private property of others.

Flight Modes, Functions and Warnings

Flight Modes

To avoid serious injury and property damage, observe the following rule:

Do NOT switch from P mode to either A mode or F mode unless you are sufciently familiar with

the aircraft’s behavior for each ight mode, since disabling GPS may result in being unable to land

the aircraft safely.

A mode (Atti mode) Warning

The aircraft will enter A-mode in the following two instances:

1. Passive: When there is weak GPS signal or when the compass experiences interference where

the Vision System is unavailable.

2. Active: Users toggle the ight mode switch to A-mode.

In A-mode, the Vision System and some advanced features are disabled. Therefore, the aircraft

cannot position or auto-brake in this mode and is easily affected by its surroundings, which may

result in horizontal shifting. Use the remote controller to position the aircraft.

Maneuvering the aircraft in A-mode can be difficult. Before switching the aircraft into A-mode,

make sure you are comfortable ying in this mode. DO NOT y the aircraft too far away as you

might lose control and cause a potential hazard.

Avoid ying in areas where GPS signal is weak, or in conned spaces. The aircraft will otherwise

be forced to enter A-mode, leading to potential ight hazards, please land it in a safe place as soon

as possible.

P mode is preferred for most ying scenarios. Users can switch to A mode where and when P mode

is unavailable. Be aware that some features are NOT available for A mode, and therefore be EXTRA

cautious when ying in A mode.

1. P mode (Positioning): P mode works best when the GPS signal is strong. There are three different

states of P mode, which will be automatically selected by the Inspire 1 aircraft depending on GPS

signal strength and Vision Positioning sensors:

a. P-GPS: GPS and Vision Positioning are both available, and the aircraft is using GPS for positioning.

b. P-OPTI: If GPS is NOT available, the aircraft will use the Vision Positioning System to hover

accurately. Note that the Vision Positioning System may NOT work properly when the Inspire 1

aircraft is ying over water, over surfaces without a clear pattern, or in a low light environment.

c. P-ATTI: When neither GPS nor Vision Positioning is available, the aircraft is using only its barometer

for positioning, so only altitude is controlled.

2. A mode (Attitude): The GPS and Vision Positioning System are NOT used for positioning. The

aircraft only uses its barometer to maintain altitude. If it is still receiving a GPS signal, the aircraft

can automatically return home if the Remote Controller signal is lost and if the Home Point has been

recorded successfully.

3. F mode (Function): Intelligent Flight is activated in this mode. Ensure you are familiar with Intelligent

Flight functions before use.

If you intend to switch to modes that disable GPS assistance (e.g., A mode), you are required to accept

the prompted disclaimer to enable this function. If this function is enabled, you further understand and

agree that data including but not limited to ight telemetry data and function records could be uploaded

to and maintained on a DJI designated server.

Failsafe and Return to Home

1. The Return to Home feature will NOT work if the GPS signal is insufcient or if GPS is not active.

2. Press the RTH (Return to Home) Button on the remote controller to bring the aircraft back to the Home

Point instead of turning off the remote controller.

3. Tall buildings may adversely affect the Failsafe function. Please adjust the aircraft location, altitude and

speed while returning home to avoid obstacles.

4. Make sure to always y the aircraft within the transmission range of the remote controller.

5. When updating the Home Point, do NOT block the GPS signal of the remote controller and ensure the

new Home Point is correct on the live map.

6. Do NOT update the Home Point near tall buildings, as the GPS may be blocked and lead to an

incorrect location being stored.

7. Only use the Failsafe and Return to Home functions in case of emergency, as they may be affected by

the weather, the environment, or any nearby magnetic elds.

8. The aircraft cannot avoid obstacles during the Failsafe RTH; therefore it is important to set an

appropriate Failsafe altitude before each ight.

9. When ying indoors, the aircraft cannot perform precision hovering when ying above the surfaces that do

not have a clear pattern. Refer to the “Vision Positioning System” section for complete indoor ying criteria.

10. Do NOT update the Home Point near tall buildings, as the GPS may be blocked and lead to an

incorrect location being stored.

Low Battery

1. When the Critical Battery Level Warning activates and the aircraft is descending automatically, you

may push the throttle up to maintain the aircraft's altitude and navigate it to a more appropriate location

for landing.

2. When battery warnings are triggered, promptly bring the aircraft back to the Home Point or land to

avoid losing power during ight and causing damage to the aircraft, property, animals, and people.

Transformation Function

To reduce the risk of pinching, observe the following rules:

1. Stay away from the aircraft when it is transforming to prevent injury.

2. Do NOT attempt to catch or hold the aircraft, as the landing gear will lower if the Vision Position

System detects an object and may cause injury.

1. Ensure the landing gear is lowered before landing.

2. Keep the aircraft arms clean, otherwise transformation may be affected.

3. Never apply lubricants to aircraft arms.

Vision Positioning System

1. The Vision Positioning System cannot work properly over surfaces that do NOT have pattern variations.

The effective altitude for the Vision Positioning System to function correctly is less than 9.8 feet (3

meters) above ground level (AGL).

2. The Vision Positioning System may NOT function properly when the aircraft is ying over water.

3. Keep your pets away from the aircraft when the Vision Positioning System is activated, as the sonar

sensors emit a high frequency sound that is only audible to some pets.

4. Note that the Vision Positioning System may NOT function properly when the aircraft is ying too fast or

too low.

5. Operate the aircraft cautiously when in any of the following situations:

a) Flying over monochrome surfaces (e.g., pure black, pure white, pure red, pure green)

;

b) Flying over highly reective surfaces;

c) Flying at high speeds (over 8m/s at 2 meters or over 4m/s at 1 meter);

d) Flying over water or transparent surfaces;

e) Flying over moving surfaces or objects;

f) Flying in an area where the lighting changes frequently or drastically;

g) Flying over extremely dark (< 10 lux) or bright (> 10,000 lux) surfaces;

h) Flying over surfaces that can absorb sound waves (e.g., thick carpet).

i ) Flying over surfaces without clear patterns or texture;

j ) Flying over surfaces with identical repeating patterns or textures (e.g. tiles with same design);

k) Flying over inclined surfaces that will deect sound waves away from the aircraft.

6. In the event of loss of the remote controller’s signal, the aircraft will hover for 8 seconds and then auto-land

if it is in “P” mode.

Compliance with Regulations & No-Fly Zones

Regulations

To avoid non-compliant behavior, serious injury and property damage, observe the following rules:

1. Do NOT operate in the vicinity of manned aircraft, regardless of altitude. (Land immediately if

necessary)

2. Do NOT y the aircraft in densely populated areas, including cities, sporting events, exhibitions,

performances, etc.

3. Do NOT y the aircraft above the authorized altitude. Remain well clear of and do NOT interfere

with manned aircraft operations. Be aware of and avoid other aircraft and obstacles at all times.

To avoid non-compliant behavior, serious injury and property damage, observe the following rules:

1. Do NOT y the aircraft near or inside no-y zones specied by local laws and regulations. The no-y

zone list includes: airports, borders between two sovereign countries or regions, major cities/regions,

etc., and is continuously updated.

2. Do NOT y the aircraft above the authorized altitude

3. ALWAYS keep your aircraft within visual line of sight (VLOS), and use an observer to assist if needed.

4. NEVER use the aircraft to carry illegal or dangerous goods/payloads.

1. Make sure you understand the nature/type of your ight operation (such as for recreation, for public

use, or for commercial use) and have obtained corresponding approval and clearance from the related

government agencies before ight. Consult with your local regulators for comprehensive denitions

and specic requirements. For users operating their aircraft in the United States, please rst visit http://

www.knowbeforeyouy.org/ and take action appropriate to your circumstances.

2. Please note that remote controlled aircraft may be banned from conducting commercial activities in

certain countries and regions. Check and follow all local laws and ordinances before ying as those

rules may differ from those stated here.

3. Do NOT fly around sensitive infrastructure or property such as power stations, water treatment

facilities, correctional facilities, heavily traveled roadways, government facilities, military zones, etc.

4. Respect the privacy of others when using the camera. Do NOT conduct surveillance operations

such as image capture or video recording on any person, entity, event, performance, exhibition, and

property without authorization or where there is an expectation of privacy, even if the image or video is

captured for personal use.

5. Please be advised that in certain areas, the recording of images and videos from events,

performances, exhibitions, or commercial properties by means of a camera may contravene copyright

or other legal rights, even if the image or video was shot for personal use.

No-Fly Zones

DJI always stresses safety during ight, and has therefore developed various aids to help users comply

with local rules and regulations while ying. We strongly recommend that you update the rmware to the

latest version to ensure the following features are fully updated:

No-Fly Zones

1. No-Fly Zones include but are not limited to major airports around world, borders between two

sovereign countries or regions, major cities/regions, etc.

La pagina sta caricando ...

dji Camera Exporter Guida utente

Marca: dji

Modello: Camera Exporter

Tipo: Guida utente

Questo manuale è adatto anche per

Scarica il pdf

rapporto

in altre lingue

English: dji Camera Exporter User guide

dji Camera Exporter Guida utente

Questo manuale è adatto anche per

dji Camera Exporter Guida utente

in altre lingue

Documenti correlati

Altri documenti