mothercare YPSI Travel System Guida utente

Categoria
Passeggini
Tipo
Guida utente

Questo manuale è adatto anche per

Ypsi
U.S.A./CANADA
EN Instructions for use
ES Instrucciones de uso
FR Notice d’emploi
3
2
1
click
click
click
1
2
click
CHASSIS
6
5
4
3
2
1
8
7
9
h
11
10
12
click
15
14
13
2
2
2
1
1
16
17
click
click
click
click
click
click
3
2
1
SEAT
click
6
5
4
8
7
9
1
2
1
2
12
11
10
click
5
4
1
22
3
a
b
13
14
15
3
2
1
16
17
18
2
1
click
1
2
click
20
21
19
23
24
22
c
1
2
a
b
26
25
27
Ypsi Chassis
2
5
6
20
20
13
14
15
1
3
4
7
12
11
8
10
9
17
18
16
19
1 SPST7924DN
SPST7924SN
2 SPST7936N
3 SPST7935N
4 SPST6232KN
5 SAPI10219NGP
6 SPST7255N
7 ARPI0730L89NGR
8 SPST7309N
9 SPST7925N
10 SAPI10405NGR
11 SPS T10252DN
SPST10252SN
12 SAPI0696•
13 SPST7286KKDNPEG
SPST7286KKSNPEG
14 SAPI10218NGP
15 SAPI7956KNN
16 MMST0087N
SPST7303N
MMRA0007
MMCA0007L30
17 ITCYP0000NL25
18 SAPI10260DNF
SAPI10260SNF
19 ERSHYP00-SH01RT01
20 MMMO0025D
EN Spare parts available in different colours to be specified when ordering.
ES Repuestos disponibles en otros colores que se especificarán en el pedido.
FR Pièces de rechange disponibles en plusieurs couleurs à spécifier dans la demande.
- 18 -
EN Spare parts available in different colours to be specified when ordering.
ES Repuestos disponibles en otros colores que se especificarán en el pedido.
FR Pièces de rechange disponibles en plusieurs couleurs à spécifier dans la demande.
Ypsi Seat
1 ITSE050000NL25
2 ASPI0225L89N
3 BSPSYP00
4 BCASYP00
5 SAPI10231
6 BSASYP00
4
6
2
3
5
1
- 19 -
EN_English
Thank you for choosing a Peg-Pérego product.
WARNING
_ CAREFULLY READ INSTRUCTIONS
AND KEEP FOR FUTURE USE.
_ THE CHILD’S SAFETY COULD BE PUT
AT RISK IF THE INSTRUCTIONS ARE
NOT FOLLOWED.
_ THIS PRODUCT IS DESIGNED FOR
CHILDREN WHOSE MAXIMUM WEIGHT
IS 50 lbs (22.7 KG) AND WHOSE
MAXIMUM HEIGHT IS 43 INCHES
(110 CM). THIS SHOPPER BASKET IS
DESIGNED TO CARRY A MAXIMUM
WEIGHT OF 15 POUNDS (7 KG). ANY
POACH OR POCKET PROVIDED WITH
THIS UNIT IS DESIGNED TO CARRY A
MAXIMUM WEIGHT OF 0.44 lbs (0.2 KG).
_ THIS ITEM WAS DESIGNED FOR USE IN
COMBINATION WITH 1 PEG-PÉREGO
PRIMO VIAGGIO 4•35 NIDO CAR SEAT,
PRIMO VIAGGIO 4•35 CAR SEAT, YPSI
SEAT.
_ BEFORE USE CHECK THAT THE CAR
SEAT OR SEAT UNIT ARE CORRECTLY
FIXED TO THE ITEM.
_ DO NOT PUT HOT DRINKS IN THE DRINK-
HOLDER, NOR ITEMS WEIGHING MORE
THAN 0,5 KG (1 LBS).
_ WARNING: THE
MAXIMUM WEIGHT ALLOWED TO HANG
FROM THE HANDLEBAR IS 2,2 LBS (1 KG)
_ WARNING: DO
NOT APPLY GREATER WEIGHTS TO THE
HANDLEBAR THAN THOSE SPECIFIED BY
THE MANUFACTURER SO AS NOT TO
COMPROMISE THE STABILITY AND SAFETY
OF THE PRODUCT
_ FAILURE TO FOLLOW MANUFACTURER’S
SPECIFICATIONS OR USE OF
ACCESSORIES OTHER THAN THOSE
APPROVED BY THE MANUFACTURER
MAY CAUSE THE UNIT TO BECOME
UNSTABLE.
_ WARNING: AVOID
SERIOUS INJURY FROM FALLING OR
SLIDING OUT. ALWAYS USE COMPLETE 5
POINT SEAT BELT IN COMBINATION WITH
THE SEAT UNIT.
_ WARNING: NEVER
LEAVE YOUR CHILD UNATTENDED.
_ ALWAYS USE ALL THE BRAKES
WHENEVER PARKED.
_ TO AVOID SERIOUS INJURY, WHEN
MAKING ADJUSTMENTS ENSURE
THE CHILD’S BODY IS CLEAR OF ALL
MOVING PARTS.
_ ALL OPERATING AND ASSEMBLY
PROCEDURES SHOULD BE PERFORMED
BY AN ADULT.
_ DO NOT LIFT THE STROLLER BY
GRIPPING THE FRONT BAR. THE FRONT
BAR IS NOT DESIGNED TO WITH STAND
LOADS.
_ ENSURE THAT THE STROLLER IS
OPENED CORRECTLY AND LOCKED IN
POSITION OF USE.
_ CHECK TO MAKE SURE THAT THE
CAR SEAT OR THE BABY CARRIAGE
IS CORRECTLY FASTENED TO THE
STROLLER (WHERE APPLICABLE).
_ DO NOT DRIVE THIS PRODUCT
AROUND STAIRS OR STEPS; CARE MUST
BE TAKEN IF UNIT IS USED ON STAIRS
OR ESCALATORS.
_ DO NOT USE THE PRODUCT IF IT HAS
BROKEN OR MISSING PARTS.
_ DO NOT USE NEAR FIRE OR EXPOSED
FLAME.
_ WARNING: KEEP
CHILDREN AWAY WHILE OPENING
AND CLOSING TO AVOID TRAPPING OR
INJURY
_ WARNING:
WARNING! DO NOT ADD ANY
MATTRESS ARE NOT APPROVED BY
THE MANUFACTURER.
_ WARNING: DO
NOT MAKE ANY ALTERATIONS OR
MODIFICATIONS TO THE STROLLER
WITH PRODUCTS NOT SUPPLIED BY
THE MANUFACTURER AS THIS MAY
CAUSE INSTABILITY OR STRUCTURAL
DEMAGE NOT COVERED UNDER
WARRANTY.
- 20 -
NOTICE
THIS ARTICLE MEETS OR EXCEEDS
ALL REQUIREMENTS COVERED IN
ASTM F833 STANDARD AND LATEST
REVISIONS.
The images referring to the textile details may
differ from the collection purchased.
For more information, consult our website:
www.pegperego.com
CHASSIS:
INSTRUCTIONS
1 OPENING: Before opening the frame, if present,
remove (without using blades) all die-cut
cardboard.
WARNING:
_ DO NOT PULL OR FORCE THE FASTENER BEYOND
ITS LIMIT.
_ DO NOT USE THE FASTENER AS A HANDLE BAR
FOR TRANSPORT OR TO CARRY WEIGHTS.
DO NOT HANG BAGS OR OTHER ACCESSORIES
ON THIS ELEMENT.
Press the side fastener downwards, grip the upper
ends of the handle bar and rotate them towards
you until the chassis has opened completely
(fig_a). Opened chassis (fig_b). The chassis is
opened correctly when you hear a click, which
corresponds to the handle bar frame attaching -
please look at the picture.
2 FITTING THE WHEELS: slot the rear wheel
crosspiece onto the uprights (fig_a), ensuring
that it is facing the right way, then attach the
rear wheels until they click into place (fig_b) . To
assemble the front wheels, fit them into the slots
until they lock into place (fig_c).
3 FITTING THE HANDLE BAR: insert the handlebar
into the frame (fig_a) as shown in the picture. For
the attachment to be complete, press the two
buttons on the side of the handle bar (fig_b) and
press the handle bar until you hear it click (fig_c).
4 BASKET ASSEMBLY: to facilitate basket assembly,
pull the tab outwards and lift as shown in the
figure (fig_a).
Slip the basket flap into the slot along the front
bar of the chassis (Fig_b).
5 Fasten the basket eyelets to the buttons on each
side of the frame.
6 To complete the basket attachment procedure
for the front part, you are required to insert the
supplied tie (fig_1) as follows:
position it between the basket and buttons,
as shown (fig_2) and use your finger to push
downwards, so as to complete the attachment
procedure (fig_3).
Repeat the same procedure for the other side of
the basket.
7 Attaching the rear part of the basket.
Remove the card from the rear bar.
Fasten the upper basket eyelet to the button on
each side of the frame (Fig_a).
Fasten the basket’s two lower eyelets to the two
buttons on the rear bar of the frame (Fig_b).
8 Basket fastened correctly (fig_g).
Lastly, re-position the footrest, pressing inward with
your hand as shown in the figure (fig_h).
It is possible to increase the basket capacity by
pulling the tab outwards (fig_i).
WARNING! If you do not hook the basket on
correctly, as shown, the basket will be unable to
support the weight of loads placed in it.
9 FIXED OR SWIVELLING FRONT WHEELS: to lock
the front wheels, rotate the lever anticlockwise
onto the locked padlock (fig_a), to release
the wheels - turn the lever clockwise to the
unlocked padlock (fig_b). On difficult terrain, we
recommend using fixed wheels.
10 BRAKE: press the lever down to apply the brake
and lock the frame. Do the opposite to release
the brake.
11 ADJUSTABLE HANDLE BAR: to adjust the height
of the handlebar, pull the levers towards you
(fig_a) and move the handle bar until it clicks
(fig_b). The handle bar can be adjusted in
several positions.
12 FOLDING: lock the front wheels into fixed
position (fig_a), put the handle bar to its lowest
position (fig b). Rotate the safety lever to the
left (fig_c) and pull the frame’s internal handle
towards you (fig_d). Lift the handle until the frame
is completely folded (fig_e).
13 To fold correctly, make sure the side hook is
engaged (fig_a). When folded, the chassis will
stand upright (fig_b).
14 TRANSPORT: the stroller can be conveniently
carried (with the front wheels in fixed position)
using the central handle bar.
15 All the wheels can be removed to reduce
dimensions further. To remove the back wheels:
pull the lever downwards and remove the
wheel as illustrated (fig_a). To remove the front
wheels: press the tab as shown and remove the
wheels (fig_b).
T-MATIC SYSTEM
16 T-Matic System is the quick, practical system
that allows you to attach to the Ypsi Chassis:
- Ypsi Seat
- Primo Viaggio 4•35 Nido, Primo Viaggio 4•35 car
Seat (with Primo Viaggio LINKS adapters).
Position them on the T-matic System and press
on the product with both hands until they lock
into place.
Check that the child transport element is
properly attached.
SERIAL NUMBERS
17 Ypsi Chassis, has the information on the
product’s production date on the lower part of
the frame.
_ Product name, production date and serial
number of the chassis. This information is
essential in the event of a claim.
CLEANING AND
MAINTENANCE
Cleaning must only be carried out by adults.
PRODUCT MAINTENANCE: protect from the
weather: water, rain, or snow; prolonged and
continuous exposure to bright sunlight may
give rise to colour changes of various different
materials; store this product in a dry place.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32

mothercare YPSI Travel System Guida utente

Categoria
Passeggini
Tipo
Guida utente
Questo manuale è adatto anche per