Huawei WiMAX CPE Guida Rapida

Tipo
Guida Rapida
WiMAX CPE
Quick Start
Huawei Technologies Co., Ltd.
Huawei Industrial Base, Bantian, Longgang
Shenzhen 518129
People’s Republic of China
www.huawei.com
Copyright © Huawei Technologies Co., Ltd. 2011. All rights reserved.
No part of this document may be reproduced or transmitted in any form or by any means
without prior written consent of Huawei Technologies Co., Ltd.
The product described in this manual may include copyrighted software of Huawei
Technologies Co., Ltd. and possible licensors. Customers shall not in any manner reproduce,
distribute, modify, decompile, disassemble, decrypt, extract, reverse engineer, lease, assign,
or sublicense the said software, unless such restrictions are prohibited by applicable laws or
such actions are approved by respective copyright holders under licenses.
Trademarks and Permissions
, , and are trademarks or registered trademarks of Huawei
Technologies Co., Ltd.
Other trademarks, product, service and company names mentioned are the property of their
respective owners.
Notice
Some features of the product and its accessories described herein rely on the software
installed, capacities and settings of local network, and may not be activated or may be
limited by local network operators or network service providers. Thus the descriptions herein
may not exactly match the product or its accessories you purchase.
Huawei Technologies Co., Ltd. reserves the right to change or modify any information or
specifications contained in this manual without prior notice or obligation.
NO WARRANTY

BY APPLICABLE LAWS, NO WARRANTIES OF ANY KIND, EITHER EXPRESS OR
IMPLIED, INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE MADE IN
RELATION TO THE ACCURACY, RELIABILITY OR CONTENTS OF THIS MANUAL.
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO CASE SHALL
HUAWEI TECHNOLOGIES CO., LTD BE LIABLE FOR ANY SPECIAL, INCIDENTAL,
INDIRECT, OR CONSEQUENTIAL DAMAGES, OR LOST PROFITS, BUSINESS,
REVENUE, DATA, GOODWILL OR ANTICIPATED SAVINGS.
Import and Export Regulations
Customers shall comply with all applicable export or import laws and regulations and will
obtain all necessary governmental permits and licenses in order to export, re-export or
import the product mentioned in this manual including the software and technical data
therein.
i
Contents
Getting to Know Your CPE ............................................................................................................ 1
Preparing for Installation ................................................................................................................ 4
Logging in to the Web-Based Utility ............................................................................................. 6
Troubleshooting .............................................................................................................................. 7
Specifications .................................................................................................................................. 9
Warnings and Precautions .......................................................................................................... 10
1
Thank you for purchasing WiMAX CPE!
Getting to Know Your CPE
The supported functions and actual appearance of the CPE may vary with the product you
purchase. The following pictures are provided for illustration purpose only.
Front Panel
2
Indicator
Status
Description
WiMAX
On
The indicators indicate the signal strength of the WiMAX
network. When all the indicators are on, it indicates that the
signal strength is at the highest level.
Blink
The biggest bar of the indicator is blinking steadily when
the CPE is in idle.
The indicator bars are blinking in sequence from top to
bottom when the upgrade file is being downloaded.
The indicator bars are blinking in incremental sequence
from bottom to top when the CPE is being upgraded.
The entire indicator bars are blinking simultaneously and
steadily when the software of the CPE is exceptional but
can be restored or upgraded.
The indicator bars may be blinking randomly when the
software or hardware of the CPE is damaged.
Off
There is no WiMAX network signal.
POWER
On
The CPE is powered on.
Off
The CPE is powered off.
LAN
On
The LAN port is being used.
Blink
The data is being transmitted.
Off
The LAN port is unused.
TEL
On
The telephone is registered.
Blink
The telephone is being used or the telephone is registering.
Off
The telephone is unregistered.
NOTE:
WiMAX: Worldwide Interoperability for Microwave Access
CPE: Customer Premises Equipment
LAN: Local Area Network
3
Rear Panel
Interface
Description
POWER
The interface is used to connect to the output interface of the power
adapter.
TEL
The interface is used to connect a telephone line.
4
Interface
Description
LAN
The interface is used to connect the CPE to the computer.
RESET
Press and hold the button for one to eight seconds to restart the CPE.
Press and hold the button for over eight seconds to restore the default
settings of the CPE.
Once you restore the default settings, all the customized data will be
lost. Use this function with caution.
The port is used to connect a compatible external antenna (optional
accessory and sold separately). For details about how to install a
compatible external antenna and enable it, refer to the online help in the
Web-based utility.
CAUTION:
Do not touch the port.
Preparing for Installation
Selecting a Proper Installation Position
Obstacles such as concrete or wooden walls may affect the transmission of WiMAX
network signals. Therefore, install the CPE in an open space.
Keep the CPE away from any household appliance that produces a strong electric or

5
Connecting the Cables
NOTE:
During lightning storms, power off the CPE.
Use the cables and the power adapter provided with the product.
e is provided for illustration purpose. You can connect the CPEs
to the CPE according to the actual requirements.
6
Logging in to the Web-Based Utility
Take the Windows XP operating system and the Internet Explorer 6.0 as examples.
Ensure that the CPE is connected to the PC. To log in to the Web-based utility, do as follows:
1. Set the IP address of the PC and ensure that the IP address of the PC is in the same
network segment as that of the CPE.
NOTE:
By default, the IP address of the CPE is 192.168.1.1 and the subnet mask is
255.255.255.0.
If the CPE is working in DHCP mode, it is recommended that the IP address and DNS
settings be obtained automatically.
2. Start the Internet Explorer, enter http://192.168.1.1 in the address bar, and then press
Enter.
3. Enter the user name and the password (both are user by default) in the login window,
and then click Login.
For details about the settings of advanced parameters, see the online help in the
Web-based utility. To read the online help, you need to install the Adobe Reader 6.0 or later
versions.
7
Troubleshooting
The power indicator is not on.
Ensure that the CPE is powered on.
Ensure that the power adapter is compatible with the CPE.
You cannot make calls.
Ensure that the telephone is working normally and the telephone line is connected
properly.
 See the online help.
If the problem persists, contact the local service provider.
You cannot log in to the Web-based utility.
Ensure that the CPE is powered on.
Ensure that the network cable connecting the CPE and the PC is in good condition.
Ensure that the parameters are set correctly.
If the problem persists, contact the local service provider.
The WiMAX network cannot be found.
Check the power supply, ensuring that the power supply is properly connected.
Ensure that the CPE is placed in an open space where it is away from obstacles such
as concrete or wooden walls.
Ensure that the CPE is placed away from any household appliance that produces a
strong electr
dish antenna.
8
If the problem persists, contact the local service provider.
The CPE or the power adapter overheats.
The CPE may get heated after being used for a long time. Therefore, power off the CPE
when you do not use the CPE.
Place the CPE in a well-ventilated place and do not expose the CPE to direct sunlight.
9
Specifications
WiMAX Parameters
Standard
IEEE 802.16e-2005
Frequency
2.4962.69 GHz
Interface
LAN
One Fast Ethernet (FE) interface
TEL
One Plain Old Telephone Service (POTS) interface
Other Parameters
Power adapter input
100240 V AC
Power consumption
10 W
Power supply to CPE
12 V, 1 A
Operating temperature
0  )
Operating humidity
5% to 95%, non-condensing
Dimensions (L×W×H)
128 mm × 60 mm × 186 mm
10
Warnings and Precautions
To use the CPE properly and safely, read these warnings and precautions carefully and
strictly observe them during operation. Unless otherwise specified, the CPE described in
this section includes the CPE and its accessories.
Basic Requirements
During storage, transportation, and operation of the CPE, keep it dry and prevent it from
colliding with other objects.
Do not dismantle the CPE. In case of any fault, contact an authorized service center for
assistance or repair.
Without authorization, no organization or individual can change the mechanical, safety,
or performance design of the CPE.
When using the CPE, observe all applicable laws and regulations and respect the legal
rights of other people.
Environmental Requirements for Using the CPE
Before connecting and disconnecting cables, stop using the CPE, and then disconnect
it from the power supply. Ensure that your hands are dry during operation.
Keep the CPE far from sources of heat and fire, such as a heater or a candle.
Keep the CPE far from electronic appliances that generate strong magnetic or electric
fields, such as a microwave oven or a refrigerator.
Place the CPE on a stable surface.
Place the CPE in a cool and well-ventilated indoor area. Do not expose the CPE to
direct sunlight. Use the CPE in an area with a temperature ranging from 0°C to 40°C.
Do not block the openings on the CPE with any object. Reserve a minimum space of 10
cm around the CPE for heat dissipation.
11
Do not place any object (such as a candle or a water container) on the CPE. If any
foreign object or liquid enters the CPE, stop using the CPE immediately, power it off,
remove all the cables connected to it, and then contact an authorized service center.
During thunderstorms, power off the CPE, and then remove all the cables connected to
it to prevent it from getting damaged due to lightning strikes.
Precautions for Using Wireless CPEs
When using the CPE, ensure that the antenna of the CPE is at least 20 cm away from
all persons.
Do not use the CPE where using wireless CPEs is prohibited or may cause interference
or danger.
The radio waves generated by the CPE may interfere with the operation of electronic
medical CPEs. If you are using any electrical medical CPE, contact its manufacturer for
the restrictions on the use of the CPE.
Do not take the CPE into operating rooms, intensive care units (ICUs), or coronary care
units (CCUs).
Areas with Inflammables and Explosives
Do not use the CPE where inflammables or explosives are stored, for example, in a gas
station, oil depot, or chemical plant. Otherwise, explosions or fires may occur. In
addition, follow the instructions indicated in text or symbols.
Do not store or transport the CPE in the same box as inflammable liquids, gases, or
explosives.
Accessory Requirements
Use only the accessories supplied or authorized by the CPE manufacturer. Otherwise,
the performance of the CPE may get affected, the warranty for the CPE or the laws and
regulations related to telecommunications terminals may become null and void, or an
injury may occur.
12
Do not use the power adapter if its cable is damaged. Otherwise, electric shocks or fires
may occur.
Ensure that the power adapter meets the specifications indicated on the CPE
nameplate.
Ensure that the power adapter meets the requirements of Clause 2.5 in
IEC60950-1/EN60950-1 and it is tested and approved according to national or local
standards.
Safety of Children
Keep the CPE and its accessories out of the reach of children. Otherwise, they may damage
the CPE and its accessories by mistake, or they may swallow the small components of the
CPE, causing suffocation or other dangerous situations.
Maintenance
If the CPE is not used for a long time, power it off, and then remove all the cables
connected to it.
If any exception occurs, for example, if the CPE emits any smoke or unusual sound or
smell, stop using the CPE immediately, power it off, remove all the cables connected to
it, and then contact an authorized service center.
Do not trample, pull, or overbend any cable. Otherwise, the cable may get damaged,
causing malfunction of the CPE.
Before cleaning the CPE, stop using it, power it off, and then remove all the cables
connected to it.
Use a clean, soft, and dry cloth to clean the CPE shell. Do not use any cleaning agent
or spray to clean the CPE shell.
13
Disposal and Recycling Information
This symbol on the CPE (and any included batteries) indicates that the CPE
(and any included batteries) should not be disposed of as normal household
garbage. Do not dispose of your CPE or batteries as unsorted municipal
waste. The CPE (and any batteries) should be handed over to a certified
collection point for recycling or proper disposal at the end of its life.
For more detailed information about the recycling of the CPE or batteries, contact your
local city office, the household waste disposal service, or the retail store where you
purchased this CPE.
The disposal of this CPE is subject to the Waste from Electrical and Electronic
Equipment (WEEE) Directive of the European Union. The purpose for separating
WEEE and batteries from other waste is to minimize any environmental impact and
health hazard due to the presence of hazardous substances.
Reduction of Hazardous Substances
This CPE is compliant with the EU Registration, Evaluation, Authorisation and Restriction of
Chemicals (REACH) Regulation (Regulation No 1907/2006/EC of the European Parliament
and of the Council) and the EU Restriction of Hazardous Substances (RoHS) Directive
(Directive 2002/95/EC of the European Parliament and of the Council). For more information
about the REACH compliance of the CPE, visit the Web site
www.huaweiCPE.com/certification. You are recommended to visit the Web site regularly for
up-to-date information.
EU Regulatory Conformance
This CPE should be installed and operated with a minimum distance of 20 cm between
the antenna and all persons.
 

1999/5/EC.
14

C.
Dansk: Huawei Technologies Co., Ltd. erk rer hermed at denne enhed er i
overensstemmelse med de obligatoriske krav og andre relevante bestemmelser i
direktiv 1999/5/EF.
Nederlands: Hierbij verklaart Huawei Technologies Co., Ltd. dat dit apparaat in
overeenstemming is met de essentiële eisen en de andere relevante bepalingen van
richtlijn 1999/5/EC.
English: Hereby, Huawei Technologies Co., Ltd. declares that this CPE is in compliance
with the essential requirements and other relevant provisions of Directive 1999/5/EC.
Eesti: Käesolevaga kinnitab Huawei Technologies Co., Ltd., et see seade vastab
Direktiivi 1999/5/EÜhinõudmistele ja teistele asjakohastele määrustele.
Suomi: Huawei Technologies Co., Ltd. vakuuttaa täten, että tä laite on
yhdenmukainen direktiivin 1999/5/EY olennaisten vaatimusten ja direktiivin muiden
asiaankuuluvien lausumien kanssa.
Français (Européen) : Huawei Technologies Co., Ltd. déclare que ce produit est
conforme aux exigences essentielles et aux autres dispositions pertinentes de la
directive 1999/5/CE.
Deutsch: Huawei Technologies Co., Ltd. erklärt hiermit, dass dieses Produkt die
erforderlichen Bestimmungen und andere relevante Verordnungen der Richtlinie
1999/5/EG einhält.



Magyar: Jelen nyilatkozaton keresztül a Huawei Technologies Co., Ltd. kijelenti, hogy a
szük megfelel az EC/5/1999 Irányelv összes lényeges követelménnek és

Gaeilge: Fograíonn Huawei Technologies Co., Ltd. leis seo go bhfuil an fheiste seo i
gcomhlíonadh leis na fíor-riachtanais agus na forálacha eile maidir le Treoir 1999/5/AE.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24

Huawei WiMAX CPE Guida Rapida

Tipo
Guida Rapida