Panasonic VDR-M53PP Manuale utente

- : Not available

Thank you for buying a Panasonic product. Please take the time to become familiar with the operating

instructions and how it is set up. Keep this manual handy for future reference.

Printed on recycled paper.

VQT0R00-1

QR35665

M0205KZ-1035

Operating Instructions

DVD Video Camera

Model No.

VDR-M53PP

VDR-M55PP

VDR-M75PP

VDR-M95PP

VDR-M53PP

VDR-M55PP

VDR-M75PP

VDR-M95PP

Built-in Flash - -

USB -

Remote Controller -

PC Software -

The illustration shows VDR-M95PP.

For USA assistance, please call: 1-800-211-PANA(7262) or send e-mail to : [email protected]

For Canadian assistance, please call: 1-800-561-5505 or visit us at www.panasonic.ca

T

his manual was printed

with soy based ink.

VDR-M95M75M55M53PP.book Page 1 Tuesday, March 29, 2005 2:19 PM

2

Important Information

For Your Safety

The power switch turns the DVD Video Camera on and off, leaving the date/time feature unaffected. If the camera is to

be left unattended for a long period of time, turn it off .

The DVD Video Camera and AC adaptor have the

following caution marks.

CAUTION: TO REDUCE THE RISK OF

ELECTRIC SHOCK, DO NOT OPEN.

NO USER-SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED

SERVICE PERSONNEL.

Precautions

WARNING: Many television programs and films are

copyrighted. In certain circumstances, copy-right

law may apply to private in-home videotaping of

copyrighted materials.

Identifications of caution marks

This symbol warns the user that

uninsulated voltage within the unit may

have sufficient magnitude to cause

electric shock. Therefore, it is

dangerous to make any kind of contact

with any inside part of this unit.

This symbol alerts the user that

important literature concerning the

operation and maintenance of this unit

has been included. Therefore, it should

be read carefully to avoid any problems.

WARNING : TO PREVENT FIRE OR SHOCK HAZARD, DO NOT

EXPOSE THIS UNIT TO RAIN OR MOISTURE.

WARNING : TO PREVENT FIRE OR SHOCK HAZARD, USE THE

RECOMMENDED ACCESSORIES ONLY.

WARNING: TO PREVENT FIRE OR SHOCK HAZARD, BE

SURE TO USE THE SPECIFIED AC

ADAPTOR (VSK0677).

CAUTION

RISK OF ELECTRIC

SHOCK

DO NOT OPEN

The liquid crystal display (LCD) panel is made by

highly precise technology. More than 99.99% of

its picture elements (pixels) are effective, but

some (less than 0.01%) may appear as colored

bright dots. This does not indicate a fault as the

LCD panel stretches the limits of current

technology.

CLASS 1

LASER PRODUCT

CAUTION

This product contains a laser diode of higher

class than 1. To ensure continued safety, do not

remove any covers or attempt to gain access to

the inside of the product. Refer all servicing to

qualified personnel.

VDR-M95M75M55M53PP.book Page 2 Tuesday, March 29, 2005 2:19 PM

3

Microsoft

®

, Windows

®

, Windows

®

98, Windows

®

Me, Windows

®

2000 Professional, Windows

®

XP Home

Edition and Windows

®

XP Professional are registered trademarks of Microsoft Corporation.

Intel

®

, Pentium

®

Processor, and Celeron

®

Processor are registered trademarks of Intel Corporation.

IBM

®

and PC/AT

®

are registered trademarks of International Business Machines Corporation.

Manufactured under license from Dolby Laboratories.

“Dolby” and the double-D symbol are trademarks of Dolby Laboratories.

Other company names and product names listed are trademarks or brand names belonging to each

individual company.

SD logo is a trademark.

Apparatus Claims of U.S. Patent Nos. 4,631,603, 4,577,216, and 4,819,098, licensed for limited viewing.

This product incorporates copyright protection technology that is protected by method claims of certain

U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights

owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and

is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision

Corporation. Reverse engineering or disassembly is prohibited.

FCC Note: This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation. This equipment generates, uses,

and can radiate radio frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications. However, there is no guarantee

that interference will not occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by turning the equipment off and

on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

FCC Caution: To assure continued compliance, follow the attached installation instructions and use

only shielded interface cables with ferrite core when connecting to computer or peripheral devices.

Any changes or modifications not expressly approved by the party responsible for compliance could

void the user’s authority to operate this equipment.

Declaration of Conformity

Trade Name: Panasonic

Model No.: VDR-M53PP / VDR-M55PP / VDR-M75PP / VDR-M95PP

Responsible party: Panasonic Corporation of North America

One Panasonic Way, Secaucus, NJ 07094

Support Contact: Panasonic Consumer Electronics Company

1-800-211-PANA (7262)

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two

conditions: (1)This device may not cause harmful interference, and (2) this device must accept

any interference received, including interference that may cause undesired operation.

This class B digital apparatus complies with CANADIAN ICES-003.

This Product has a fluorescent lamp that contains a small amount of mercury. It also contains

lead in some components. Disposal of these materials may be regulated in your community

due to environmental considerations. For disposal or recycling information please contact your

local authorities, or the Electronics Industries Alliance: <http://www.eiae.org

.>

A lithium ion/polymer battery that is recyclable powers the product

you have purchased. Please call 1-800-8-BATTERY for information

on how to recycle this battery.

U.S.A./CANADA CONSUMERS: ATTENTION:

VDR-M95M75M55M53PP.book Page 3 Tuesday, March 29, 2005 2:19 PM

4

Be sure to read the following before opening

the CD-ROM package

This Agreement will take effect at the moment you open the package of the storage device (CD-ROM) provided with this

product, if you agree to the terms herein.

If you do not accept the terms of this Agreement, immediately return the unopened package of storage medium and

enclosed materials (printed matter, external package, and all others) to your dealer, or return only the package of storage

medium to your dealer.

This License Agreement certifies that you were granted license in the past.

License Agreement

Article 1 Grant of License

Matsushita Electric Industrial Co., Ltd. grants you the following rights for the following products (to be referred to as “This

Software” hereafter) that you have obtained with this Agreement:

(a) You may use This Software only on a single piece of equipment. However, if this equipment cannot be

used because of mechanical problem, you may temporarily use This Software on another piece of

equipment.

(b) Although This Software contains several components that can be run on computer as independent

functions, all components are licensed as a single product: You may not, by any means, use these

components on different computers at the same time.

Article 2 Copyrights

The copyrights of This Software, attached manual, etc. are owned by the following corporations, and are protected by

copyright laws in Japan and USA, as well as by other intellectual property and international properties:

Article 3 Other Rights and Limitations

(a) You may not copy This Software or any of the printed materials attached, except for duplications to provide back-up

or storage.

(b) Use of This Software by third parties is prohibited, whether by transferring, renting, leasing, lending, moving, or any

other measures.

(c) You may not decompile or disassemble this Software.

(d) Duplication and/or distribution of any files on this storage medium for commercial use is prohibited.

Article 4 Quality Assurance

Under no circumstances will Matsushita Electric Industrial Co., Ltd. accept any responsibility for any damage you may

incur from using or being unable to use This Software (including, but not limited to, loss of business profit, interruption of

business, loss of business information, or other monetary damages).

Article 5 Termination of Agreement

If you fail to comply with the terms of this Agreement, Matsushita Electric Industrial Co., Ltd. reserves the right to terminate

the Agreement. In such a case, you will be obliged to discard all copies of This Software and its components.

Article 6 Prioritized License Agreement

When some software programs are installed, the license agreements will be displayed (to be referred to as online license

agreement).

If the online license agreement conflicts with this Agreement, the online license agreement shall have a priority.

Name of Software Copyright Owners

DVD-RAM Driver Matsushita Electric Industrial Co., Ltd.

DVD-MovieAlbumSE/DVDfunSTUDIO Matsushita Electric Industrial Co., Ltd.

VDR-M95M75M55M53PP.book Page 4 Tuesday, March 29, 2005 2:19 PM

5

IMPORTANT SAFEGUARDS

In addition to the careful attention devoted to quality standards in the manufacture of your video product, safety is a major

factor in the design of every instrument. But, safety is your responsibility too.

This page lists important information that will help to assure your enjoyment and proper use of DVD Video Camera and

accessory equipment. Please read it carefully before operating your video product and keep it in a handy place for future

reference.

INSTALLATION

1 Read and Follow Instructions — All the safety and

operating instructions should be read before the video

product is operated. Follow all operating and use

instructions.

2 Retain Instructions — The safety and operating

instructions should be retained for future reference.

3 Heed Warnings — Comply with all warnings on the

video product and in the operating instructions.

4 Power Sources — This video product should be

operated only from the type of power source indicated

on the marking label. If you are not sure of the type of

power supply to your home, consult your video dealer

or local power company. For video products intended

to operate from battery power, or other sources, refer

to the operating instructions.

5 Overloading — Do not overload

wall outlets and extension cords

as this can result in a risk of fire or

electric shock. Overloaded AC

outlets and extension cords are

dangerous, and so are frayed

power cables, damaged or

cracked wire insulation and

broken plugs. They may result in

a shock or fire hazard. Periodically examine the cord

and have it replaced by your service technician if

appearance indicates damage or deteriorated

insulation.

6 Power-Cord Protection — Power-supply cords

should be routed so that they are not likely to be walked

on or pinched by items placed upon or against them,

paying particular attention to cords at plugs,

convenience receptacles, and the point where they

exit from the appliance.

7 Ventilation — Slots and openings in the cabinet are

provided for ventilation to ensure reliable operation of

the video product and to protect it from overheating.

These openings must not be blocked or covered. The

openings should never be blocked by placing the video

product on a bed, sofa, rug, or other similar surface.

This video product should never be placed near or over

a radiator or heat register. This video product should

not be placed in a built-in installation such as a

bookcase or rack unless proper ventilation is provided

or the video product manufacturer's instructions have

been followed.

8 Attachments — Do not use attachments unless

recommended by the video product manufacturer as

they may cause hazards.

Caution: Maintain electrical safety. Powerline operated

equipment or accessories connected to this unit should

bear the UL listing mark or CSA certification mark on the

accessory itself and should not have been modified so as

to defeat the safety features. This will help avoid any

potential hazard from electric shock or fire. If in doubt,

contact qualified service personnel.

9 Water and Moisture — Do not use this video product

near water — for example, near a bath tub, wash bowl,

kitchen sink, or laundry tub, in a wet basement, or near

a swimming pool, and the like.

10 Accessories — Do not place this video product on an

unstable cart, stand, tripod, bracket, or table. The

video product may fall, causing serious injury to a child

or adult, and serious damage to the appliance. Use

only with a cart, stand, tripod, bracket, or table

recommended by the manufacturer, or sold with the

video product. Any mounting of the product should

follow the manufacturer's instructions, and should use

a mounting accessory recommended by the

manufacturer.

kawaii koneko

MOMO

key to chise

mekoalbum

cat book

mother

diet

Zoo Docter

Part 1

Zoo Docter

Part 2

sasaki akemi

hirayamo akiko

horie youji chikako kimio

auto moter

kabushiki

mitoniikikata

yakamashii

igarashi

Why?

kuro

abcdfevcdsz

kusano

mitono

kakurai

tadashiigenkou

oomori matuda

nurie

yohsinarish yohsinarishashin

mito

namemekogaikiteita

mito

momogatoiredemizubitashi

album

mame

1

f

u

n

g

a

f

u

n

g

a

f

u

n

g

a

f

u

n

g

a

f

u

n

g

a

f

u

n

g

a

f

u

n

g

a

metsuki

123

nyanko

1

midori

3

okubyo

2

m

o

t

h

e

r

P

a

r

t

2

tomodachi

3

junkaikun

2

momo

3

momo

2

momo

1

ebisu

2

ebisu

1

key

5

key

4

key

3

key

2

key

1

chise

5

chise

4

chise

3

chise

2

chise

1

VDR-M95M75M55M53PP.book Page 5 Tuesday, March 29, 2005 2:19 PM

6

11 An appliance and cart combination

should be moved with care. Quick

stops, excessive force, and uneven

surfaces may cause the appliance

and cart combination to overturn.

12 Power Lines — An outside antenna system should

not be located in the vicinity of overhead power lines or

other electric light or power circuits, or where it can fall

into such power lines or circuits. When installing an

outside antenna system, extreme care should be

taken to keep from touching or approaching such

power lines or circuits as contact with them might be

fatal. Installing an outdoor antenna can be hazardous

and should be left to a professional antenna installer.

USE

13 Cleaning — Unplug this video product from the wall

outlet before cleaning. Do not use liquid cleaners or

aerosol cleaners. Use a damp cloth for cleaning.

14 Object and Liquid Entry — Never push objects of any

kind into this video product through openings as they

may touch dangerous voltage points or short-out

parts, which could result in a fire or electric shock.

Never spill liquid of any kind on the video product.

15 Lightning — For added protection for this video

product during a lightning storm, or when it is left

unattended and unused for long periods of time,

unplug it from the wall outlet and disconnect the

antenna or cable-system. This will prevent damage to

the video product due to lightning and power-line

surges.

SERVICE

16 Servicing — Do not attempt to service this video

product yourself as opening or removing covers may

expose you to dangerous voltage or other hazards.

Refer all servicing to qualified service personnel.

17 Conditions Requiring Service — Unplug this video

product from the wall outlet and refer servicing to

qualified service personnel under the following

conditions.

a. When the power-supply cord or plug is damaged.

b. If liquid has been spilled, or objects have fallen into

the video product.

c. If the video product has been exposed to rain or

water.

d. If the video product does not operate normally by

following the operating instructions. Adjust only

those controls that are covered by the operating

instructions. Improper adjustment of other controls

may result in damage and will often require

extensive work by a qualified technician to restore

the video product to its normal operation.

e. If the video product has been dropped or the casing

has been damaged.

f. When the video product exhibits a distinct change

in performance — this indicates a need for service.

18 Replacement Parts — When replacement parts are

required, have the service technician verify that the

replacements he uses have the same safety

characteristics as the original parts. Use of

replacements specified by the video product

manufacturer can prevent fire, electric shock or other

hazards.

19 Safety Check — Upon completion of any service or

repairs to this video product, ask the service

technician to perform safety checks recommended by

the manufacturer to determine that the video product

is in safe operating condition.

20 Heat — The product should be situated away from

heat sources such as radiators, heat registers, stoves,

or other products (including amplifiers) that produce

heat.

VDR-M95M75M55M53PP.book Page 6 Tuesday, March 29, 2005 2:19 PM

7

Cautions When Using

Handle the liquid crystal display (LCD) with care:

• The LCD is a very delicate display device: Do not press its surface with force, hit it or prick it with a sharp

object.

• If you push the LCD surface, unevenness in display may occur. If unevenness does not disappear, turn

the DVD Video Camera off, wait for a few moments, and then turn it on again.

• Do not place the DVD Video Camera with the open LCD screen down.

• Close the LCD monitor when not using the DVD Video Camera.

IMPORTANT NOTE

Liquid crystal display and viewfinder:

• The LCD screen and viewfinder are the products of highly precise technology. Among the total number

of pixels (approx. 120,000 pixels for LCD monitor and approx. 200,000 pixels for viewfinder), 0.01% or

less pixels may be missing (black dots) or may remain lit as colored dots (red, blue, green). This shows

the limitations of the current technology, and does not indicate a fault that will interfere with recording.

• The LCD screen and viewfinder will be slightly dimmer than usual when the DVD Video Camera is at low

temperature, as in cold areas, or immediately after power is turned on. Normal brightness will be restored

when the temperature inside the DVD Video Camera rises.

• The following characteristics may appear in the viewfinder.

− The colors seen in the viewfinder may appear different from the colors on the LCD monitor.

− Text appears slightly fuzzy.

− The edges of the subject appear glaring.

− Iridescence momentarily occurs when you move the observation point along with the motion of the

subject.

Note that the foregoing phenomena have no effect on the image in a disc or card, so there is no cause

for concern.

Hold the DVD Video Camera correctly:

• Do not hold the DVD Video Camera by the viewfinder or LCD monitor when lifting it: the viewfinder or LCD

monitor could detach and the DVD Video Camera may fall.

Do not subject the DVD Video Camera to impact:

• This DVD Video Camera is a precision machine. Take great care that you do not strike it against a hard

object or let it fall.

• Do not use the DVD Video Camera on a tripod in a place where it is subject to severe vibrations or impact.

No sand or dust!

• Fine sand or dust entering the DVD Video Camera or AC adaptor could cause malfunctions or defects.

No water or oil!

• Water or oil entering the DVD Video Camera or AC adaptor could cause electric shock,

malfunctions or defects.

VDR-M95M75M55M53PP.book Page 7 Tuesday, March 29, 2005 2:19 PM

8

Heat on surface of product:

• The surface of the DVD Video Camera will be slightly warm, but this does not indicate a fault.

Screen on connected TV:

• Never leave the disc navigation screen, still image or camera image displayed on your TV to which the

DVD Video Camera is connected: Doing so could result in displayed image retention or phosphor

degradation of TV screen.

Be careful of ambient temperature:

• Using the DVD Video Camera in a place where the temperature is over 140°F (40°C) or under 32°F (0°C)

will result in abnormal recording/playback.

• Take care that the temperature of this DVD Video Camera, when connected to a PC, does not rise

excessively (reference for usage: approx. 30 minutes at about 86°F (30°C).

• Do not leave the DVD Video Camera on a beach or in a closed vehicle where the temperature is very

high for a long time: This could cause malfunctions.

Do not point directly at the sun:

• If direct sunlight strikes the lens or viewfinder, the DVD Video Camera could malfunction or a fire could

occur.

• Do not leave the DVD Video Camera with the LCD screen exposed to direct sunlight: This could cause

malfunctions.

Do not use the DVD Video Camera near TV or radio:

• This could cause noise to appear on the TV screen or in radio broadcasts.

Do not use the DVD Video Camera near strong radio waves or magnetism:

• If the DVD Video Camera is used near strong radio waves or magnetism, such as near a radio wave tower

or electric appliances, noise could enter video and audio that are being recorded. During playback of

normally recorded video and audio, noise may also be present in picture and sound.

At worst the DVD Video Camera could malfunction.

Do not expose the DVD Video Camera to soot or steam:

• Thick soot or steam could damage the DVD Video Camera case or cause malfunctions.

Do not use the DVD Video Camera near corrosive gas:

• If the DVD Video Camera is used in a place where there is dense exhaust gas generated by gasoline

or diesel engines, or corrosive gas such as hydrogen sulfide, the external or internal terminals could

corrode, disabling normal operation, or the battery connecting terminals could corrode, so that power will

not turn on.

Do not use the DVD Video Camera near ultrasonic humidifier:

• Calcium and other chemicals dissolved in water could scatter in the air, and white particles could adhere

to the optical head of the DVD Video Camera, which could cause it to operate abnormally.

Do not expose the DVD Video Camera to insecticide:

• Insecticide entering the DVD Video Camera could dirty the lens in the laser pickup block, and in such a

case the DVD Video Camera might not operate normally. Turn the DVD Video Camera off and cover it

with vinyl sheet, etc. before using insecticide.

Do not use an optional 8 cm CD lens cleaner:

• Cleaning the lens is not necessary when using this DVD Video Camera in the usual way.

• Using 8 cm CD lens cleaner could cause this DVD Video Camera to malfunction.

Do not touch the lens in laser pickup block.

• If you touch the lens in the laser pickup block directly it may cause malfunctions. Laser pickup block is

not a compensable part. Therefore, pay much attention when operating this camera.

VDR-M95M75M55M53PP.book Page 8 Tuesday, March 29, 2005 2:19 PM

9

Be careful of moisture condensation:

• When you move the DVD Video Camera between places where the difference in temperatures is great

- such as entering a lodge from a ski slope or going out of a cooled room or vehicle - condensation (vapor

in air warmed or cooled to water droplets) could occur on the lens and/or inside the DVD Video Camera.

If condensation occurs, do not open the cover of disc or card insertion block if possible. If condensation

occurs on the lens, wipe it off with a soft, dry cloth. Even if the external surface of DVD Video Camera

has dried, condensation may remain inside: Turn the DVD Video Camera off and leave it in a dry place

for at least 1-2 hours before using it again.

Do not use the DVD Video Camera for a long, uninterrupted period of time:

• This DVD Video Camera cannot be used for a long time continuously as a surveillance camera/monitor.

If you use the DVD Video Camera for a long continuous period of time, the temperature of the DVD Video

Camera could exceed its proper limit and the recording/playback operation could be slowed down: In this

case, turn it off and wait for a while before using it again.

• Take care that the temperature of this DVD Video Camera, when connected to a PC, does not rise

excessively [reference for usage: approx. 30 minutes at about 86°F (30°C).]

Do not turn the DVD Video Camera off while the ACCESS/PC indicator* or CARD

ACCESS indicator is lit or blinking:

• The ACCESS/PC or CARD ACCESS indicator is lit or

blinking to show that data is being written to disc or card,

or being read from it. At this time, do not do any of the

following, so as not to damage the data:

− Remove battery pack

− Disconnect AC adaptor

− Plug or unplug USB cable

− Remove disc or card

− Subject DVD Video Camera to severe vibrations or

impact.

− Forcefully open or close the LCD monitor

If you turn the DVD Video Camera off while the ACCESS/PC or CARD ACCESS indicator is lit or blinking,

turn it on again with the disc or card loaded in it: Repair of the disc or card will be executed automatically

(see page 151).

Do not wipe the DVD Video Camera case with benzene or thinner:

• The coating of case could peel off or the case surface could deteriorate.

• When using a chemical cleaning cloth, follow the instructions.

Also read the instructions attached with optional accessories:

• For optional accessories, observe the cautions and follow instruction manuals attached.

Keep the Memory Card out of reach of children to prevent swallowing.

ACCESS/PC

indicator*

CARD ACCESS

indicator

* ACCESS indicator (VDR-M53PP)

Labeled “ACCESS/PC indicator” in this manual.

VDR-M95M75M55M53PP.book Page 9 Tuesday, March 29, 2005 2:19 PM

10

Cautions When Storing

Do not leave the DVD Video Camera in a place where the temperature is very high for a

long period of time:

• The temperature inside a closed vehicle or trunk can become very high in a hot season. If you leave the

DVD Video Camera in such a place, it could malfunction or the case could be damaged. Do not expose

the DVD Video Camera to direct sunlight or place it near a heater.

Do not store the DVD Video Camera in a place where the humidity is high or in a dusty

place:

• Dust entering the DVD Video Camera could cause malfunctions. If humidity is high, the lens could

become moldy, and the DVD Video Camera could become inoperative. It is recommended that you put

the DVD Video Camera in a box together with a desiccant when storing it in a closet, etc.

Do not store the DVD Video Camera in a place subject to strong magnetism or intense

vibrations:

• This could cause malfunctions.

Detach the battery pack from the DVD Video Camera and store it in a cool place:

• Leaving the battery pack attached or storing it at high temperature could shorten its life.

Suggestions and Restrictions

Make a trial recording:

• Always make a trial recording before doing actual recording to make sure that recording is normal.

Data that have not been stored normally because of a defect in the DVD Video Camera cannot be

restored.

It is recommended that you use a DVD-RAM disc from which recorded contents can be deleted for trial

recording.

Do not use the DVD Video Camera for professional applications:

• This DVD Video Camera is designed and produced for home-use recording and playback.

The recorded contents cannot be compensated for:

• Panasonic cannot compensate for any damages caused when recording is not made normally or

recorded contents cannot be played back because of a defect in the DVD Video Camera, disc or card.

Also, Panasonic cannot be responsible for your recorded video and audio.

• If you or a third party makes a mistake when handling this DVD Video Camera, disc, card, etc., the

recorded contents may be lost. We cannot be responsible for compensation for damages due to loss of

recorded contents.

Copyright:

• Data recorded on the disc or card in this DVD Video Camera using other digital/analog media or devices

is protected by the copyright act and cannot be used without permission of the owner of copyright, except

for personal enjoyment. Be aware that recording is restricted for some demonstrations, performances

and exhibitions, even for personal enjoyment.

VDR-M95M75M55M53PP.book Page 10 Tuesday, March 29, 2005 2:19 PM

11

Read This First

To guide you, we've included the following six chapters.

• The section on “Setup” explains how to set up the

DVD Video Camera, battery pack, and set the

date/time.

• The section on “Basic Techniques” explains the

basic operation of this DVD Video Camera-

recording of movies, still images, external input,

and playback of recorded images.

• The section on “Advanced Techniques” explains

settings on this DVD Video Camera for more

advanced usage.

• The section on “Disc Navigation” explains editing

with Disc Navigation: Refer to this section when

finalizing DVD-R disc and initializing DVD-RAM

disc.

• The section on “Installing Software” explains the

contents of provided CD-ROM and how to install

the included software.

• “Supplementary Information” includes an

introduction to products sold separately, proper

cleaning, and troubleshooting.

We want this manual to be as helpful as possible,

so it includes two easy ways to find the information

you need:

• A quick index for the information you use most

often (this page).

• A detailed table of contents directing you to

specific information quickly (see pages 15-17).

Get to know your DVD Video Camera by using this

manual, and get to know Panasonic. We appreciate

your business.

Quick Index

Available Discs................................................. 28

Recording Movie.............................................. 51

Playing Back .................................................... 59

Connecting to a TV.......................................... 71

Functions Available with Disc Navigation ...... 100

Installing Software (Only for VDR-M55PP/VDR-

M75PP/VDR-M95PP) .................................... 130

About This Manual

lDisplays in this manual

The displays in the manual may not appear exactly as those you will actually see in the viewfinder or on

the LCD screen.

lNotation of cancel button

Press the stop/cancel button to stop your operation midway, or return the menu screen to the preceding

one. The expression “press the g button” will be used in this text.

l1, 2 and 3 marks beside headings

Some functions of this DVD Video Camera are unavailable with disc or card. Refer to the marks at right

above each function to identify whether the disc or card is compatible with the function. Refer to these marks

and identify the functions and operation to match the disc or card you use.

lIllustrations in this manual

Although the external appearances of VDR-M53PP, VDR-M55PP, VDR-M75PP and VDR-M95PP are

different, they are both operated in the same way.

Illustrations of VDR-M95PP are used in this text.

lSome of the illustrations in this manual may differ slightly in shape from the

actual items in order to make the explanation easier to understand.

With this DVD Video Camera you can view the picture being recorded or the playback picture on the LCD

monitor or in the viewfinder. Opening or closing the LCD monitor switches the picture to appear on the LCD

monitor or in the viewfinder. The following text describes operation assuming that the viewfinder is used as

a monitor device.

VDR-M95M75M55M53PP.book Page 11 Tuesday, March 29, 2005 2:19 PM

12

Introduction

lYou can record even immediately following playback (page 51)

Unlike tape devices, you do not need to search for the recording start position or locate the beginning of

a blank portion.

New recording will not overwrite any previously recorded data.

lYou can immediately play back desired recorded scenes (page 98)

You do not need to rewind, unlike recorders using tape.

You can select any scene you want and immediately play it back).

lUse Disc Navigation to create your original movie (page 116)

You can delete unnecessary scenes, move any scenes, etc., and create your original movie work (Play

List).

lYou can easily edit scenes (page 77)

Using this DVD Video Camera, you can collect

scenes of your child, for example, on a play list by

using the Disc Navigation function and create an

original movie. Then simply play back the play list

and dub it on VCR. It is also easy to make any

number of identical tapes.

lCreate original DVDs on PC

(page 143)

You can use a DVD-R disc to create an original DVD,

using the provided software CD-ROM.

The created DVD disc can be played back on a DVD

player, DVD-ROM drive, etc.

If you stop playback midway and start recording, overwrite will not occur.

Recorded scenes

Before editing

After editing

Until now, you had to

repeatedly press

buttons.

With DVD, you can simply

play back this DVD Video

Camera, and press the

record button on VCR.

Original DVD being

created

Playback of DVD

VDR-M95M75M55M53PP.book Page 12 Tuesday, March 29, 2005 2:19 PM

13

Quick Start Guide for Software

Only for VDR-M55PP/VDR-M75PP/VDR-M95PP

Features

The following software programs are contained on the provided CD-ROM.

• Confirming the environment of connecting equipment: see page 130.

Installation Guide (see page 130 for details)

1 Connect this DVD Video Camera to the PC as illustrated below.

2 Install the software (DVD-RAM Driver, DVDfunSTUDIO and DVD-MovieAlbumSE).

• The software can also be installed from the “Setup Menu”.

If the “Setup Menu” does not appear, double-click the CD-ROM drive icon.

Suggestions for using software (see page 143 for details)

1 Connect this DVD Video Camera to the PC as illustrated below.

• Please ensure a DVD-RAM disc with recorded material is loaded into the DVD Video Camera before

proceeding.

2 Edit video clips using DVD-MovieAlbumSE.

• You can edit motion image files on the DVD-RAM disc.

Software Feature

DVD-RAM Driver Install this driver when using stills and video clips recorded on a DVD-

RAM disc on a PC.

DVD-MovieAlbumSE By using DVD-MovieAlbumSE with DVD Video Camera, it is possible to

perform playback, recording and editing of the DVD-RAM disc. It is also

possible to transfer extracted data and title information, etc. to

DVDfunSTUDIO.

DVDfunSTUDIO Use this software when burning a DVD-Video disc from motion images

edited using DVD-MovieAlbumSE.

To USB port

VDR-M95M75M55M53PP.book Page 13 Tuesday, March 29, 2005 2:19 PM

14

3 Export video clips to PC using DVD-MovieAlbumSE.

4 DVDfunSTUDIO program will automatically start. (see page 144 for details)

5 Edit video clip files and introduce interactive DVD menus using DVDfunSTUDIO Software.

6 Insert a new DVD-R disc into the DVD Video Camera.

• When making an original DVD-R disc using DVDfunSTUDIO software, a message for initialization

appears on the LCD of DVD Video Camera. Select “No” and then follow the instructions on the screen

of your PC to make the original DVD-R disc. Do not perform initialization of the DVD-R disc on the

Video Camera when using a DVD-R disc with your computer.

7 Write the final movie to the DVD-R disc with DVDfunSTUDIO.

• Write the final movie to an 8 cm DVD-R disc in this DVD Video Camera using DVDfunSTUDIO software.

Cautions for use

• When you are making a recording on a new DVD-R disc in your DVD Video Camera, you must initialize

the disc before recording video clips. DVD-RAM disc and SD Memory Card do not require

initialization.

• DVD-R discs are a one time write format; therefore, when you write information to the DVD-R disc

with DVDfunSTUDIO, you cannot edit it again.

• When using DVD-MovieAlbumSE software on Windows

®

2000 Professional / XP Home Edition /

XP Professional, log on to your PC as Administrator.

• Set the display resolution to 1024 × 768 (16 bits color) or higher.

Display Settings method as follows:

Select “Start” >> “Control Panel” >> “Display” and select “Settings” tab on “Display”, and then adjust “Screen

Resolution” and “Color quality”.

• Depending on the condition of your PC, it may take a long time to install the software.

VDR-M95M75M55M53PP.book Page 14 Tuesday, March 29, 2005 2:19 PM

15

Table of Contents

Important Information ........................................ 2

Be sure to read the following before opening

the CD-ROM package .................................... 4

IMPORTANT SAFEGUARDS ........................... 5

Cautions When Using ....................................... 7

Cautions When Storing ................................... 10

Suggestions and Restrictions ......................... 10

Read This First ............................................... 11

About This Manual .......................................... 11

Introduction ..................................................... 12

Quick Start Guide for Software ....................... 13

Table of Contents ........................................... 15

Check Provided Accessories .......................... 18

Names of Parts ............................................... 19

Setting Up the Battery Pack ............................ 23

Charging Battery Pack ......................................... 23

Record and Play Back Using Disc (Video and

Photo) ........................................................... 24

Record and Play Back Using Card (Photo) .... 26

Discs and Cards ............................................. 28

Available Discs .................................................... 28

Information on DVD-R Disc ................................. 29

Examples of Discs that Cannot be Used on this

DVD Video Camera .......................................... 29

Handling Discs ..................................................... 30

Available Cards ................................................... 30

Storage Capacity of Disc or Card ................... 32

Recordable Time of Movie (Video) ...................... 32

Recordable Stills (Photos) on Disc ...................... 33

Recordable Stills (Photos) on Card ..................... 33

Size and Quality of Photos .................................. 33

Setup

Setting Up the DVD Video Camera ................ 34

Holding DVD Video Camera ................................ 34

Attaching Shoulder Belt ....................................... 35

Attaching Lens Cap ............................................. 35

Inserting Battery into Remote Controller (Not

included with VDR-M53PP) .............................. 36

Removing Battery from Remote Controller .......... 36

Viewing Subject Through Viewfinder ................... 37

Viewing Image on LCD Monitor Screen .............. 38

Closing LCD Monitor ........................................... 39

Setting Date and Time ......................................... 40

Changing Display Format of Date and Time ....... 41

About the Battery Pack ................................... 42

Attaching Battery Pack to DVD Video Camera .... 42

Removing Battery Pack ....................................... 42

Remaining Battery Level Indicator ....................... 44

Efficient Use of Battery Pack ............................... 44

Using DVD Video Camera with AC adaptor ........ 45

Inserting and Removing Disc .......................... 46

Inserting Disc ....................................................... 46

Removing Disc .................................................... 48

Inserting and Removing Card ......................... 49

Basic Techniques

Basic Operation of DVD Video Camera ......... 50

Turning DVD Video Camera On or Off ................ 50

Recording Movie ............................................. 51

Recording Stills ............................................... 52

Compensating for Backlight ............................ 53

On-Screen Information ................................... 54

Information Display during Recording ................. 54

Zooming .......................................................... 57

Macro Recording ................................................. 58

Playing Back ................................................... 59

Playing Back ........................................................ 59

Playback from Start of Disc or Card .................... 60

Search Playback of Movie ................................... 60

Frame Advance/Frame Back/Slow Playback of

Movie ................................................................ 60

Skip Playback of Movie ....................................... 61

Playing Back Stills ............................................... 61

Jumping to Specified Point (Go To) .................... 62

On-Screen Information Display ...................... 63

Information Display during Playback ................... 63

Manually Focusing Subject ............................. 64

Focusing during Recording ................................. 64

Adjusting Exposure Manually ......................... 66

Using Auto Function ....................................... 67

Built-in Flash (Only for VDR-M95PP) ............. 68

Setting Flash ................................................... 69

Recording in Dark Locations Using the Light

from the LCD Monitor ................................... 70

Using External Microphone ............................ 70

Viewing on TV Screen .................................... 71

Connecting to a TV .............................................. 71

Viewing on TV Screen ......................................... 72

Playback on DVD Video Recorder/Player ...... 73

To Customers who Have a DVD Video

Recorder with a hard disk ............................ 73

Playback on DVD Player ................................ 74

Recording (Dubbing) Images .......................... 75

Recording (Dubbing) Images from Other Video

Device .............................................................. 75

Recording (Dubbing) Images from Other Video

Cameras ........................................................... 76

Recording (Dubbing) Images on Other Video

Devices ............................................................. 77

Advanced Techniques

Understanding Flow of Menus ........................ 78

VDR-M95M75M55M53PP.book Page 15 Tuesday, March 29, 2005 2:19 PM

16

Setting Up Camera Functions ......................... 80

Selecting Shooting Mode to Match the Subject

(Switching Program AE Mode) ......................... 80

Adjusting Color (White Balance) .......................... 81

Using the Electronic Image Stabilizer (EIS) ......... 83

Reducing Wind Noise during Recording (Wind

Cut) ................................................................... 83

Setting Up Record Functions .......................... 84

Switching Movie Quality (VIDEO Mode) .............. 84

Switching Quality of Still Image (Quality) ............. 85

Setting to Wide TV Screen Mode (Wide) (Only for

VDR-M75PP / VDR-M95PP) ............................ 86

Receiving Image from Another Device (Input

Source) ............................................................. 88

Switching External Input Recording Method

(PHOTO Input) .................................................. 88

Self Timer ............................................................ 89

Setting OSD Output On or Off (On-Screen

Display) ............................................................. 90

LCD/EVF Setup .............................................. 91

Setting Brightness of LCD Screen (Brightness) .. 91

Setting Brightness of Viewfinder (EVF

Brightness) ........................................................ 91

Setting Color Density (Color Level) ..................... 92

Always Display Image in Viewfinder .................... 92

Initial Settings ................................................. 93

Switching Operating Sound On or Off (Beep) ..... 93

Turning DVD Video Camera Off Automatically

(Power Save) .................................................... 93

Turning Record LED On or Off (Record LED) ..... 94

Changing Display Language (Language) ............ 94

Resetting Menu Settings to Defaults (Reset) ...... 95

Disc Navigation

Using Disc Navigation ..................................... 96

Starting or Terminating Disc Navigation .............. 96

Playing Back from Disc Navigation Screen ......... 98

Selecting Multiple Scenes ................................... 99

Selecting Consecutive Scenes Together ............. 99

Disc Navigation Menu ................................... 100

Functions Available with Disc Navigation .......... 100

Understanding Flow of Disc Navigation Menu ... 101

Scene ............................................................ 102

Deleting Scenes (Edit-Delete) ........................... 102

Changing Images for Thumbnails (Effect -

Thumbnail) ...................................................... 104

Playing Back by Skipping Scenes (Effect - Skip)

......................................................................... 105

Arranging Order of Scenes (Edit - Move) .......... 105

Directing Scenes Effectively (Effect - Fade) ...... 106

Combining Multiple Scenes (Edit - Combine) .... 107

Dividing Movies (Edit - Divide) ........................... 108

Copying Stills on DVD-RAM Disc to Card

(Copy) ............................................................. 109

Locking Scenes on Card (Lock) ........................ 110

Selecting Scenes Using Menu Screen

(Select) ........................................................... 111

Displaying Information Using Menu Screen

(Detail) ............................................................ 112

Program ........................................................ 113

What is “program”? ............................................ 113

Switching to Thumbnail Display of Specific Date

(Switch) .......................................................... 113

Playing Back Program (Play) ............................ 114

Changing Title of Program (Title) ...................... 114

Play List ........................................................ 116

What is “Play List”? ........................................... 116

Creating New Play List (Create) ........................ 116

Switching to Display of Each Play List (Switch)

........................................................................ 117

Playing Back a Play List (Play) .......................... 117

Adding Scenes to Play List (Editing Play List) ... 118

Deleting Scenes from Play List

(Editing Play List) ........................................... 119

Adding Scenes Using Submenu for Editing

(Editing Play List) ........................................... 119

Deleting Scenes Using Submenu for Editing

(Editing Play List) ........................................... 120

Selecting Scenes Using Submenu for Editing

(Editing Play List) ........................................... 120

Arranging Order of Scenes (Move) ................... 121

Changing Title of Play List (Title) ...................... 122

Deleting Play List (Delete) ................................. 122

Go To ............................................................ 123

Top (End) .......................................................... 123

Disc or Card Management ............................ 124

Verifying Remaining Free Space on Disc or Card

(Capacity) ....................................................... 124

Protecting Disc from Writing (Protect Disc) ....... 124

Initializing DVD-RAM Disc or Card (Format Disc.

Format Card) .................................................. 125

Updating Control Information of DVD-RAM Disc

(Update Control Info.) ..................................... 126

Finalizing DVD-R Disc (Finalize Disc) ............... 127

Other Functions (Others) .............................. 128

Displaying Movies or Stills Independently

(Category) ...................................................... 128

Playing Back Scenes Repeatedly (Repeat Play)

........................................................................ 128

Slide Show (Continuous Playback of Stills) ....... 129

Installing Software (Only for VDR-

M55PP/VDR-M75PP/VDR-M95PP)

Compatible PC for use with DVD Video

Camera ...................................................... 130

Contents on Provided CD-ROM ................... 133

Recognizing the DVD Video Camera on your

computer (only when it is connected for the

first time) ......................................................... 134

Installing DVD-RAM Driver ................................ 136

Installing DVD-MovieAlbumSE .......................... 139

Installing DVDfunSTUDIO ................................. 141

If you insert an unformatted DVD-R disc in the

DVD Video Camera. . . . ................................. 142

Before closing the USB connection

(disconnecting the USB cable) or toggling the

power switch ................................................... 142

Creating DVD Video on PC from DVD-RAM

Disc Recorded on DVD Video Camera ...... 143

Uninstalling Software .................................... 144

VDR-M95M75M55M53PP.book Page 16 Tuesday, March 29, 2005 2:19 PM

17

Supplementary Information

Introduction to Optional Accessories ............ 145

Video Camera Accessories ............................... 145

Cleaning ........................................................ 146

Terminology .................................................. 147

Before Requesting Service ........................... 149

Error Messages ............................................ 151

Troubleshooting ............................................ 157

System Reset ............................................... 163

Major Specifications ...................................... 164

Request for Service Notice (USA Only) ........ 166

Limited Warranty (For USA Customers) ....... 167

Customer Services Directory ........................ 168

Warranty (For Canadian Customers) ............ 169

VDR-M95M75M55M53PP.book Page 17 Tuesday, March 29, 2005 2:19 PM

18

Check Provided Accessories

Make sure that you have found all the following accessories in the package:

: Not included with VDR-M53PP.

Battery Pack:

VDR-M53PP/VDR-M55PP/VDR-M75PP:(CGA-DU07A)

VDR-M95PP:(CGA-DU14A)

Portable power supply for this DVD Video

Camera. Charge it before use.

AC Adaptor/Charger (VSK0677):

Used to power the DVD Video Camera from

AC outlet, or charge battery pack.

DC Cord:

When powering the DVD Video Camera from

household AC outlet, use this cord to connect

the DVD Video Camera and AC adaptor.

Power Cable:

Connect between household AC outlet and

AC adaptor.

Shoulder Belt:

Attach to the DVD Video Camera to hang it

from shoulder.

Lens Cap and Lens Cap String:

Attach the lens cap when not recording, to

protect the lens.

AV/S Input/Output Cable: (EW12525)

Used to play back the DVD Video Camera

picture on a TV screen, or to input or output

video from/to another video device.

Disc Cleaning Cloth:

Used to clean discs. (P. 30)

Do not use for purposes other than cleaning

discs.

8 cm DVD-RAM Disc:

To record video (movie) on this DVD Video

Camera.

This disc can be recorded on one side only

(single-sided).

Software CD-ROM:

Use this CD-ROM on PC when connecting

the DVD Video Camera to PC.

USB Cable: (EW12531)

Remote Controller (VEQ4504):

Use to control the DVD Video Camera from a

distance.

Button Type Battery (CR2032):

To power the remote controller.

WARNING: Keep

this battery away

from children. If

swallowed, consult

a physician

immediately for

emergency

treatment.

VDR-M95M75M55M53PP.book Page 18 Tuesday, March 29, 2005 2:19 PM

19

Names of Parts

1 Built-in flash (VDR-M95PP) (P.68)

There is a sensor at the top of the flash.

2 Lens cap string attachment hole (P. 35)

3 Internal stereo microphone (P. 51)

4 Infrared receiver (VDR-M55PP/VDR-M75PP/

VDR-M95PP) (P. 37)

When the remote controller is used to operate

the DVD Video Camera, this receiver will receive

the infrared signal.

5 Recording indicator (P. 94)

The red indicator will light during recording.

6 Optical 10x zoom lens (VDR-M75PP/VDR-

M95PP)

Optical 24× zoom lens (VDR-M53PP/VDR-

M55PP) (P. 57)

7 Lens hood

8 Zoom lever (P. 57)

Push the lever to the T side for telephoto, or to

the W side for wide-angle.

9 Accessory shoe (P. 69)

Attach the optional flash.

10 Lock cover and Lock button (P. 34)

11 USB port (VDR-M55PP/VDR-M75PP/VDR-

M95PP) (P.13)

12 AV input/output jack (P. 71, 75, 77)

13 External microphone jack (P. 70)

14 2.5" type Liquid Crystal Display (LCD)

(inside) (P. 7, 38)

(Inside the cover)

12 345

12

11

13

14

67 89

10

Although the external appearances of VDR-

M53PP, VDR-M55PP, VDR-M75PP and VDR-

M95PP are different, they are both operated in

the same way. VDR-M95PP illustrations are

used in this manual.

VDR-M95M75M55M53PP.book Page 19 Tuesday, March 29, 2005 2:19 PM

20

15 Viewfinder (P. 7, 37)

16 Diopter control (P. 37)

To adjust the focus of image appearing in the

viewfinder (pull out the viewfinder).

17 ACCESS/PC indicator (VDR-M55PP/VDR-

M75PP/VDR-M95PP) (P. 9, 51, 52)

ACCESS indicator* (VDR-M53PP)

Will blink or light when the disc in DVD Video

Camera is accessed (write or read is executed)

or the DVD Video Camera is connected to PC.

18 Photo shot button (P.52)

Used when shooting still images.

19 DISC EJECT lever (P. 46)

Press and release this lever to open disc

insertion block.

20 Disc insertion block (P. 46)

21 BATTERY EJECT button (P. 42)

Press it when removing the battery pack.

* Labeled “ACCESS/PC indicator” in this

manual.

22 Battery attachment platform (P. 42)

23 Record (REC) button (P. 51)

Used when recording movies.

24 LOCK switch (P. 25, 51)

In mode, set the LOCK switch to (to the

upper left) to lock the power switch so that it does

not accidentally move to .

From mode, you cannot move the LOCK

switch to the upper left to lock the power switch.

25 Power switch (P. 50, 51, 52)

26 Shoulder belt attachment buckles (P. 35)

27 Grip Belt (Free Style Grip Belt) (P. 34)

28 Power switch toggle button

With this button depressed, the power switch

can be turned.

However, when set to “OFF,” the power switch

can be turned even if this button is not

depressed.

16

22

17 18 19 20

2321 24 25 26 27

15

28

VDR-M95M75M55M53PP.book Page 20 Tuesday, March 29, 2005 2:19 PM

La pagina sta caricando ...

Panasonic VDR-M53PP Manuale utente

Panasonic VDR-M53PP Manuale utente

in altre lingue

Documenti correlati

Altri documenti