Lindy 4 Port HDMI 4K Video Wall Scaler Manuale utente

4K HDMI 1:4 Video Wall Controller Scaler

User Manual English

No. 38135

lindy.com

Tested to Comply with

FCC Standards

For Home and Office Use!

User Manual English

Introduction

Thank you for purchasing the LINDY 4K HDMI Video Wall Controller Scaler. The HDMI Video Wall

Controller Scaler allows an HDMI input source to be freely arranged on 4 displays (TV or monitor) and/or

cascaded using multiple units in combination with an HDMI Splitter(s) to extend the HDMI signal to even

larger arrays.

This flexible feature rich product has been designed to be used in a number of different applications,

such as:

 Public/Retail Advertisement

 Digital Presentation

 Broadcasting & Control

 Surveillance & Control

 Conference & Meeting Room

Package Contents

 4K HDMI 1:4 Video Wall Controller Scaler

 Includes Multi-Country (UK/EU/US/AUS) PSU 12V 3A

 2 x 19” mounting brackets & screws

Features

 Scales a single HDMI source across 4 HDMI displays

 Cascading feature allows the creation of larger video walls, up to 15 x 15

 User definable output scaling

 Controlled via Software Application, RS-232 and Telnet

 Bezel correction to aid screen blending

 Adjustable picture contrast, brightness, saturation and hue

 Memory function to store 4 user determined configurations

 Can be used with LINDY HDMI extenders to reach remote displays

Specification

 Input ports: 1 x HDMI Female

 Input resolution: 480i – 3840x2160p24/25/30 & 4096x2160p24*

 Output ports: 4 x HDMI Female

 Output resolution: 480p – 1080p/1200pRB*

 Audio support: LPCM 2CH, 6CH, 8CH, AC3, DTS, Dolby Digital Plus, Dolby TrueHD & DTS-HD

 Control Ports: RJ45 (Telnet) & Serial 9 Way Male (RS-232)

 Video bandwidth: 300MHz/9Gbps

 Power consumption: 12.98W

 Weight: 2.9kg

 Dimensions: 438x269x44mm (WxDxH)

*For a full list of supported Input/Output resolutions and timings, and a breakdown of supported video

wall configurations please see the final section of this user manual.

User Manual English

Overview

Front Panel

1. Power

Switch the Scaler On/Off

Press and hold for 3 seconds with the Scaler already powered on to reset to Factory Default

Rear Panel

1. HDMI In

Connect your HDMI source device such as PC, Blu-ray etc to this port

2. HDMI Out A – D

Connect your HDMI displays to these ports

3. Service

Reserved for Factory use only

4. Control

Connect to an Ethernet network for Telnet control

5. RS-232

For connection to a PC/Notebook or Remote Control Processing unit

6. DC 12V

Connect the supplied 12V power supply here

1

HDMI IN

1

2

3

4

A

B

C

D

HDMI OUT

CONTROL

RS232

DC 12V

SERVICE

OUTPUT

A

B

C

D

INPUT

1

2

3

4

SAVE

RECALL

LOCK

MATRIX/

DUAL/WALL

POWER

MENU

-

+

XGA

720P

1

D C B A

2

3

4

5

6

User Manual English

Basic Operation

Important! It is strongly recommended that you use 4 identical (Brand and Model) displays for optimum

performance.

To begin connect your HDMI source to the HDMI IN port, and 4 HDMI displays to the HDMI OUT ports

A-D. By default the Scaler is set to output a 2 x 2 video wall as shown below

To add expand upon the basic 2 x 2 video wall it is possible to add further Scalers by using a HDMI

splitter between the source and the Scalers, as shown below.

3x2 Video Wall using two scalers:

3x3 Video Wall using three scalers:

This cascading can be repeated to allow a maximum of 225 displays (15x15) to be connected. To

configure the Video Wall further please refer to the following Configuration section of this manual.

C2

D1

DVD

PC

HDMI IN

Control

HDMI OUT

D C B A

A

B

C

D

Splitter

C1

B2

DVD

HDMI IN

Control

HDMI OUT

D C B A

A1

B1

D1

A2

HDMI IN

Control

HDMI OUT

D C B A

PC

Router

Splitter

C1

B2

DVD

HDMI IN

Control

HDMI OUT

D C B A

A1

B1

A2

HDMI IN

Control

HDMI OUT

D C B A

PC

Router

A3

D2

HDMI IN

Control

HDMI OUT

D C B A

User Manual English

Configuration

To begin the configuration process please download the software application from www.lindy.com,

alternatively you can configure the Scaler using RS-232 or Telnet as described later in this section.

Please note: Before beginning the software installation, please ensure that any previous versions have

been removed.

1. Navigate to the location that you saved the downloaded file and run the Setup.exe file.

2. When prompted by Windows allow the software access to your network.

3. You will now be presented with the TV Wall Set screen as show here, click Search MAC to find the

Scaler on your network. You will need to repeat this step whenever the Scaler has been power

cycled or reset. Once the software has found a Scaler you can begin configuring its settings.

User Manual English

System Configuration

Connect Interface

1. Click Connect to connect to the Scaler, at this point the settings will refresh (other than Image Adjust

which is handled separately. If you are using multiple Scalers, select the Scaler you want to connect

to using the MAC dropdown box and then press connect.

2. To disconnect a Scaler or multiple Scalers follow the step above but using Disconnect.

3. When using multiple Scalers it is important to be able to identify the location of the Scalers screens

so that the image is correctly split. You can use the ID No. field to identify the Scaler, making

configuration of the video wall more straight forward.

System Settings

1. Click Power ON to switch the Scaler on. If you’re using multiple Scalers then check the ALL IP box

next to Power ON and then click Power ON to switch all Scalers on.

2. Click Factory Reset to return the Scaler back to its default settings. If you’re using multiple Scalers

then check the ALL IP box next to Factory Reset and then click Factory Reset to reset all of the

Scalers.

3. Click Refresh to re-read the configuration from the Scaler.

Network Configuration

1. From the Address Type field drop down, choose either DHCP or STATIC and then click Set IP and

wait for a few seconds for the setting to be applied.

2. If you are using a static IP complete the IP Address, Net Mask and Default Gateway fields and then

click Set IP and wait for a few seconds for the setting to be applied.

User Manual English

Video Wall Configuration

TV Wall (1)

1. Quick Video wall layout options from 1 x 1 to 6 x 6, simply select the configuration you require.

TV Wall (2)

1. Use the Row and Column drop down boxes to create a bespoke video wall size 1 – 15 x 1 – 15 and

then click on Send to confirm the setting.

2. Bezel Correction allows the horizontal/Vertical position of all Output’s on the current Scaler (as

defined in the MAC/ID No. fields) to be adjusted for Bezels, click Send to confirm the setting.

3. When Field 2 is populated Bezel Correction will turn on automatically, here you can switch it Off. If

you want to apply this setting to multiple Scalers select the All IP check box and the apply the setting.

It is recommended to use Bezel Correction when using content containing motion/movement, if you

are using static content then the Bezel Correction can be switched off.

1

2

3

User Manual English

TV Wall (3)

1. After configuring your array in TV Wall (2), click on FAV 1 – 5 under Save TV Wall Settings to store

these values.

2. Click FAV 1 – 5 under Recall TV Wall Settings to use one of the previously saved TV Wall

configurations.

I/O Setup

1. All settings under I/O Setup can be amended for a single TV Wall Scaler or multiple TV Wall Scalers.

If using multiple Scalers click on ALL IP for each setting which you want to use with all Scalers.

Parameters and default value are as stated in RS-232 command section.

2. Set Mute to On or Off, if using multiple Scalers click on ALL IP to use this setting with all Scalers.

3. Refresh just the I/O page with one click, no other information is refreshed, click Refresh before

adjusting the settings to ensure you have the correct base values.

4. Reset all the settings from the I/O page back to factory defaults.

1

4

5

1

2

3

User Manual English

Image Adjustment

1. Brightness, Contrast, Saturation and Hue can all be amended for each output of a single TV Wall

Scaler or multiple TV Wall Scalers. If using multiple Scalers click on ALL IP for each setting which

you want to use with all Scalers. Parameters and default value are as stated in RS-232 command

section.

2. Refresh just the Image Adjust page with one click, no other information is refreshed, click Refresh

before adjusting the settings to ensure you have the correct base values.

3. Reset all the settings from the Image Adjust page back to factory defaults.

RS-232 &Telnet Control

RS-232 Protocols

4K TV Wall Scaler

Remote Control

Assignment

Baud Rate

115200bps

1

NC

1

NC

Data Bit

8

2

Tx

2

Rx

Parity

None

3

Rx

3

Tx

Flow Control

None

4

NC

4

NC

Stop Bit

1

5

GND

5

GND

6

NC

6

NC

7

NC

7

NC

8

NC

8

NC

9

NC

9

NC

RS-232 & Telnet Commands

 Commands will be not executed unless followed with a carriage return (0x0D) and commands are

case-sensitive.

 RS-232 control is set to single device only, not for use with Cascade/Bypass output's connection

device. To control multiple Scalers please use the control software.

 Bold values are the default setting.

1

2

3

User Manual English

Command

Description

Parameter

HELP(?)

Show Command list

NONE

HELP(?) N

Show Command

description

N= Command name

RRES

Request Current

Output Resolution

NONE

SRES N1

Set Output Resolution

to N1

N1=0(640x480@60)

1(480p60), 2(576p50),

3(800x600@60),

4(848x480@60),

5(1024x768@60),

6(720p50), 7(720p60),

8(1280x768@60),

9(1280x800@60),

10(1280x960@60),

11(1280x1024@60),

12(1360x768@60),

13(1366x768@60),

14(1400x1050@60),

15(1440x900@60),

16(1600x900RB@60),

17(1600x1200@60),

18(1680x1050@60),

19(1080p50),

20(1080p60),

21(1920x1200RB@60),

22(2048x1152RB@60),

23(1080I50), 24(1080I60),

25(1080p24),

26(1080p25),

27(1080p30), 28(Native)

RINS

Request Current Input

Resolution

0(VGA60), 1(VGA72),

2(VGA75), 3(VGA85),

4(WXGA60), 5(WXGA75),

6(XGA60), 7(XGA70),

8(XGA75), 9(XGA85),

10(SXGA60),

11(SXGA75),

12(SVGA56),

13(SVGA60),

14(SVGA72),

15(SVGA75),

16(SVGA85),

17(DTV_480P60),

18(DTV_576P50),

19(DTV_480I60),

20(DTV_576I50),

21(HDTV_720P50),

22(HDTV_720P60),

23(HDTV_1080I50),

24(HDTV_1080I60),

25(HDTV_1080P24),

26(HDTV_1080P50),

27(HDTV_1080P60),

28(V848_480_60),

29(V852_480_60),

30(V854_480_60),

31(V1024_852_60),

32(V1024_1024_60),

33(V1280_800_60),

User Manual English

Command

Description

Parameter

34(V1280_960_60),

35(V1360_768_60),

36(V1366_768_60),

37(V1440_900_60),

38(V1400_1050_60),

39(V1360_1024_60),

40(V1600_900_60),

41(V1600_1200_60),

42(V1680_1050_60),

43(V1920_1200_60),

44(V2048_1080_24_1),

45(V2048_1080_24_2),

46(V2048_1080_60),

47(V2048_1152_1),

48(V2048_1152_2),

49(V2048_1152_3),

50(V3840_2160_24),

51(V3840_2160_25),

52(V3840_2160_30),

53(V4096_2160_24),

54(K_

NO_SIGNAL), 55(K_NO_

SUPPORT)

ROSDD

Request OSD Status

NONE

SOSDD N1

Set OSD Status

N1 = (0 OFF), 1 (ON)

ROSDH

Request OSD H

Position

NONE

SOSDH N1

Set OSD H

Position

N1 = 0 – 20 (5)

ROSDV

Request OSD V

Position

NONE

SOSDV N1

Set OSD V

Position

N1 = 0 – 20 (5)

ROSDT

Request OSD Display

Timeout setting

NONE

SOSDT N1

Set OSD Display

Timeout in Second

N1 = 5 – 50 (50)

ROSDG

Request OSD Gain

Correction

NONE

SOSDG N1

Set OSD Gain

Correction

N1 = 0 – 10 (2)

SOSDI

Set OSD Information

Status

NONE

SOSDR

OSD reset to factory

default "off"

NONE

RBRI N1

Request Brightness

N1= 1 – 4 (2)

SBRI N1 N2

Set Channel N1

Brightness Value N2

N1 = 1 – 4

N2 = 0 – 100 (50)

RCON N1

Request Channel N1

Contrast Value

N1 = 1 – 4

SCON N1 N2

Set Channel N1

Contrast Value N2

N1 = 1 – 4

N2 = 0 – 100 (50)

RSAT N1

Request Channel N1

Saturation Value

N1 = 1 – 4

SSAT N1 N2

Set Channel N1

Contrast Value N2

N1 = 1 – 4

N2 = 0 – 100 (50)

User Manual English

Command

Description

Parameter

RHUE N1

Request Channel N1

Hue Value

N1 = 1 – 4

SHUE N1 N2

Set Channel N1

Contrast Value N2

N1 = 1 – 4

N2 = 0 – 100 (50)

SIMRE N1

Reset Picture

Setting to default

N1 = 1 (Brightness)

2 (Contrast)

3 (Saturation)

4 (Hue)

SPIRE

Reset All Picture Setting

on all Channels

NONE

RIPM

Request IP Mode

NONE

SIPM N1

Set IP Mode

N1 = 0 (Static), 1

(DHCP)

RIPA

Request IP Address

SIPA X.X.X.X

Set Static IP Address

X = 0 – 255

(192.168.1.50)

RMAA

Request Mask Address

NONE

SMAA X.X.X.X

Set Mask Address

X = 0 – 255

(255.255.255.0)

RGAA

Request Gateway

Address

NONE

SGAA X.X.X.X

Set Gateway Address

X = 0 – 255

(192.168.1.50)

RETIME

Request Ethernet

Timeout

NONE

SETIME N1

Set Ethernet Timeout

N1 = 0 (OFF), 1 (10min),

2 (20min), 3 (30min), 4

(40min), 5 (50min), 6

(60min)

RLINK

Request Ethernet

Address

IP000~255

IP010~255

IP020~255

IP030~255

MA000~255

MA010~255

MA020~255

MA030~255

GA000~255

GA010~255

GA020~255

GA030~255

RMUTE

Request Mute Status

N1 = 0 (UNMUTE), 1

(MUTE)

SMUTE N1

Set Mute Status

RPOW

Request Power

Status

N1 = 0=Power Off,

1=Power On

SPOW N1

Set Power Status

RVER

Request Version

NONE

SREL

Set Re-Link

NONE

SDEF

Reset to factory

default

NONE

RMN

Request TV Wall

Format

NONE

SMN N1 N2

Set TV Wall Output

N1 = 1 – 15 (Row),

User Manual English

Command

Description

Parameter

Format

N2 = 1 – 15 (Column)

RBH

Request H

Bezel Value

N1 = 0 – 255

SBH N1

Set H Bezel Value

RBV

Request V

Bezel Value

N1 = 0 – 255

SBV N1

Set V Bezel Value

RBEZ

Request

Bezel Status

N1 = 0 (Bezel Off), 1

(Bezel on)

SBEZ N1

Set Bezel

Status

RMDN

Request Device's ID No.

N1 = 0 – 255

SMDN N1

Set Device's ID No. to

N1

SWDE

Reset TV Wall Value

NONE

SHOT N1

Fast Setting TV

Wall format from

hot key number

N1 = 0(1x1), 1(2x2),

2(3x3), 3(4x4), 4(5x5),

5(6x6), 6(2x3), 7(3x2),

8(3x4), 9(4x2), 10(4x3),

11(4x5), 12(1x2), 3(2x1),

14(1x3), 15(3x1), 6(1x4),

17(4x1), 18(2x4), 9(3x5),

20(5x4), 21(5x3), 2(6x2),

23(6x3)

SFAVE N1

Save Favourite Setting

N1 = 1 – 5

RFAVE N1

Recall Favourite

Setting

Telnet Control

Before attempting to use the Telnet control, please ensure that both

the Scaler (via the ‘CONTROL’

port) and the PC/Laptop are connected to the same active network.

To access the Telnet control in Windows 7/10, click on the ‘Start’ menu

and type “cmd” in the Search

field then press enter Under Windows XP go to the ‘Start’ menu and click on “Run”, type “cmd” with

then

press enter.

Under Mac OS X, go to Go→Applications→Utilities→Terminal

Once in the command line interface (CLI) type “telnet”, then the "IP address" (default address is

192.168.1.50) of the Scaler and hit enter. Only when the Telnet port (device port) is not set to 23 will

the number "device port" then need to be entered after IP address (device IP) and before hit enter.

This will bring us into the device which we wish to control. Type "HELP" to list the available commands.

User Manual English

Please Note: All the commands will be not executed unless followed by a carriage return. Commands

are case-insensitive. If the IP is changed

then the IP Address required for Telnet access will also change

accordingly.

Input/Output Resolutions

Input and Output resolutions supported by the Scaler:

Input Resolutions

Output Resolutions

640×480@60/72/75/85

640×480

1280×768@60/75

480p@60 (720×480)

1024×768@60/70/75/85

576p@50 (720×576)

1280×1024@60/75

800×600

800×600@56/60/72/75/85

848×480

480p@60

1024×768

576p@50

720p@50 (1280×720)

480i@60

720p@60 (1280×720)

576i@50

1280×768

720p@50/60

1280×800

1080i@50/60

1280×960

1080p@24/50/60

1280×1024

848×480@60

1360×768

852×480@60

1366×768

854×480@60

1400×1050

1024×852@60

1440×900

1024×1024@60

1600×900 (RB)

1280×800@60

1600×1200

1280×960@60

1680×1050

1360×768@60

1080p@50/60

1366×768@60

1920×1200 (RB)

1440×900@60

2048×1152 (RB)

1400×1050@60

1080i@50/60

1360×1024@60

1080p@24/25/30

1600×900@60

1600×1200@60

1680×1050@60

1920×1200@60

2048×1080@24

2048×1152@60

3840×2160@24/25/30

4096×2160@24

User Manual English

Output resolutions supported by the Scaler when the Input resolution is 3840 x 2160:

Video Wall

1X1

2X2

3X3

4X4

5X5

6X6

7X7

8X8

9X9

10X10

15X15

0. 640×480







1. 480p@60 (720×480)







2. 576p@50 (720×576)







3. 800×600







4. 848×480







5. 1024×768







6. 720p50 (1280×720)



7. 720p60 (1280×720)



8. 1280×768



9. 1280×800



10. 1280×960



11. 1280×1024



12. 1360×768



13. 1366×768



14. 1400×1050



15. 1440×900



16. 1600×900 (RB)



17. 1600×1200



18. 1680×1050



19. 1080p@50



20. 1080p@60



21. 1920×1200 (RB)



22. 2048×1152 (RB)



23. 1080i@50



24. 1080i@60



25. 1080p@24



26. 1080p@25



27. 1080p@30



28. Native



User Manual English

Output resolutions supported by the Scaler when the Input resolution is 4096 x 2160:

Video Wall

1X1

2X2

3X3

4X4

5X5

6X6

7X7

8X8

9X9

10X10

15X15

0. 640×480







1. 480p@60 (720×480)







2. 576p@50 (720×576)







3. 800×600







4. 848×480







5. 1024×768







6. 720p50 (1280×720)







7. 720p60 (1280×720)







8. 1280×768







9. 1280×800







10. 1280×960







11. 1280×1024







12. 1360×768



13. 1366×768



14. 1400×1050



15. 1440×900



16. 1600×900 (RB)



17. 1600×1200



18. 1680×1050



19. 1080p@50



20. 1080p@60



21. 1920×1200 (RB)



22. 2048×1152 (RB)



23. 1080i@50



24. 1080i@60



25. 1080p@24



26. 1080p@25



27. 1080p@30



28. Native



CE/FCC Statement

CE Certification

This equipment complies with the requirements relating to Electromagnetic Compatibility Standards.

It has been manufactured under the scope of RoHS compliance.

CE Konformitätserklärung

Dieses Produkt entspricht den einschlägigen EMV Richtlinien der EU für IT-Equipment und darf nur

zusammen mit abgeschirmten Kabeln verwendet werden.

Diese Geräte wurden unter Berücksichtigung der RoHS Vorgaben hergestellt.

Die formelle Konformitätserklärung können wir Ihnen auf Anforderung zur Verfügung stellen

FCC Certification

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant

to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful

interference in a residential installation.

You are cautioned that changes or modification not expressly approved by the party responsible for

compliance could void your authority to operate the equipment.

This device complies with part 15 of the FCC Rules.

Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and

2. This device must accept any interference received, including interference that may cause undesired

operation.

LINDY Herstellergarantie – Hinweis für Kunden in Deutschland

LINDY gewährt für dieses Produkt über die gesetzliche Regelung in Deutschland hinaus eine zweijährige

Herstellergarantie ab Kaufdatum. Die detaillierten Bedingungen dieser Garantie finden Sie auf der LINDY Website

aufgelistet bei den AGBs.

Hersteller / Manufacturer (EU):.

LINDY-Elektronik GmbH LINDY Electronics Ltd

Markircher Str. 20 Sadler Forster Way

68229 Mannheim Stockton-on-Tees, TS17 9JY

GERMANY United Kingdom

Email: in[email protected]m , T: +49 (0)621 470050 postmaster@lindy.co.uk , T: +44 (0)1642 754000

Recycling Information

WEEE (Waste of Electrical and Electronic Equipment),

Recycling of Electronic Products

Europe, United Kingdom

In 2006 the European Union introduced regulations (WEEE) for the collection and recycling of all waste electrical

and electronic equipment. It is no longer allowable to simply throw away electrical and electronic equipment.

Instead, these products must enter the recycling process.

Each individual EU member state has implemented the WEEE regulations into national law in slightly different

ways. Please follow your national law when you want to dispose of any electrical or electronic products. More

details can be obtained from your national WEEE recycling agency.

Germany / Deutschland Rücknahme Elektroschrott und Batterie-Entsorgung

Die Europäische Union hat mit der WEEE Direktive Regelungen für die Verschrottung und das Recycling von

Elektro- und Elektronikprodukten geschaffen. Diese wurden im Elektro- und Elektronikgerätegesetz – ElektroG in

deutsches Recht umgesetzt. Das Entsorgen von Elektro- und Elektronikgeräten über die Hausmülltonne ist

verboten! Diese Geräte müssen den Sammel- und Rückgabesystemen zugeführt werden! Dort werden sie

kostenlos entgegen genommen. Die Kosten für den weiteren Recyclingprozess übernehmen die Gerätehersteller.

LINDY bietet deutschen Endverbrauchern ein kostenloses Rücknahmesystem an, beachten Sie bitte, dass

Batterien und Akkus den Produkten vor der Rückgabe an das Rücknahmesystem entnommen werden müssen und

über die Sammel- und Rückgabesysteme für Batterien separat entsorgt werden müssen. Ausführliche

Informationen zu diesen Themen finden Sie stets aktuell auf der LINDY Webseite im Fußbereich.

France

En 2006, l'union Européenne a introduit la nouvelle réglementation (DEEE) pour le recyclage de tout équipement

électrique et électronique.

Chaque Etat membre de l’ Union Européenne a mis en application la nouvelle réglementation DEEE de manières

légèrement différentes. Veuillez suivre le décret d’application correspondant à l’élimination des déchets électriques

ou électroniques de votre pays.

Italy

Nel 2006 l’unione europea ha introdotto regolamentazioni (WEEE) per la raccolta e il riciclo di apparecchi elettrici

ed elettronici. Non è più consentito semplicemente gettare queste apparecchiature, devono essere riciclate. Ogni

stato membro dell’ EU ha tramutato le direttive WEEE in leggi statali in varie misure. Fare riferimento alle leggi del

proprio Stato quando si dispone di un apparecchio elettrico o elettronico.

Per ulteriori dettagli fare riferimento alla direttiva WEEE sul riciclaggio del proprio Stato.

LINDY No 38135

2

nd

Edition, August 2017

lindy.com

Tested to Comply with

FCC Standards

For Home and Office Use!

Lindy 4 Port HDMI 4K Video Wall Scaler Manuale utente

Questo manuale è adatto anche per

Lindy 4 Port HDMI 4K Video Wall Scaler Manuale utente

in altre lingue

Documenti correlati

Altri documenti