Monarch 9403TM Manuale utente

Monarch



9403



Printer

Each product and program carries a respective written warranty, the only

warranty on which the customer can rely. Monarch reserves the right to make

changes in the product, the programs, and their availability at any time and

without notice. Although Monarch has made every effort to provide complete

and accurate information in this manual, Monarch shall not be liable for any

omissions or inaccuracies. Any update will be incorporated in a later edition of

this manual.

publication may be reproduced, transmitted, stored in a retrieval system, or

translated into any language in any form by any means, without the prior

written permission of Monarch Marking Systems, Inc.

WARNING

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference when the equipment is operated in a

commercial environment. This equipment generates, uses, and can radiate radio frequency

energy and, if not installed and used in accordance with the instruction manual, may cause

harmful interference to radio communications. Operation of this equipment in a residential

area is likely to cause harmful interference in which case the user will be required to correct

the interference at his own expense.

CANADIAN D.O.C. WARNING

This digital apparatus does not exceed the Class A limits for radio noise emissions from

digital apparatus set out in the Radio Interference Regulations of the Canadian Department

of Communications.

Le présent appareil numérique n’émet pas de bruits radioélectriques dépassant les limites

applicables aux appareils numériques de la classe A prescrites dans le Réglement sur le

brouillage radioélectrique édicte par le ministère des Communications du Canada.

Trademarks

Monarch is a registered trademark of Monarch Marking Systems, Inc.

9403, 9800, 9820, and 9830 are trademarks of Monarch Marking Systems, Inc.

TrueType is a trademark of Apple Computer, Inc.

Hewlett-Packard is a registered trademark of Hewlett-Packard Company.

Adobe and Acrobat are trademarks of Adobe Systems Incorporated which may be registered in certain

jurisdictions.

Microsoft and MS-DOS are registered trademarks of Microsoft Corporation.

Windows is a registered trademark of Microsoft in the U.S and other countries.

Monarch Marking Systems, Inc.

P.O. Box 608

Dayton, Ohio 45401

TABLE OF CONTENTS

GETTING STARTED. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1

Standard Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1

Audience. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2

Ordering Programmer’s Manuals. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2

About Monarch® Quick-set Utilities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2

Unpacking the Printer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2

Connecting the Power Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3

Establishing Communications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-4

Connecting the Communication Cable . . . . . . . . . . . . . . . . . . . . . . . . 1-4

Default Serial Port Communication Values . . . . . . . . . . . . . . . . . . . . . 1-4

About This Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-5

Menu Charts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-5

Using the Keypad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-6

Control Keys. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-6

Startup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-7

Selecting a Function. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-8

Exiting an Option . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-9

Setting Up the Printer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-9

LOADING SUPPLIES. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1

Supply Loading Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2

Loading Supply. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3

Printing a Test Label. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-4

LOADING RIBBON . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1

Loading a Ribbon Roll . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2

Table of Contents i

SETTING SUPPLY OPTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1

Ribbon . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2

Batch Separators. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-3

Print Position . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-4

Supply Position . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-5

Margin Position . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-6

Supply Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-8

COMMUNICATION VALUES. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-1

Baud Rate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2

Word Length. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2

Stop Bits. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-3

Parity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-3

Flow Control. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-4

Reset to Default Values . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-4

SETTING CONTRAST. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-1

SETTING DEFAULTS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-1

Monetary Sign . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-3

Secondary Sign . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-4

Decimal Places . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-5

Slashed Zero . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-5

Power-Up Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-6

Prompt Set. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-7

PRINTING. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-1

Interrupting a Batch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-2

Restarting a Batch. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-3

Canceling a Paused Batch. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-4

Repeating a Batch. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-7

Offline Printing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-8

Entering Numbers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-8

Entering Letters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-9

ii Table of Contents

Entering Symbols. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-11

Using Bar Code 128. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-11

Entering and Changing Data. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-11

Types of Data Entry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-13

Entering a Batch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-14

Using the Standard Formats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-16

CLEANING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-1

Cleaning the Printhead and Platen Roller . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-2

DIAGNOSTICS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-1

Factory Set Password. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-1

Checking the Software Version . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-2

Printing a Test Pattern. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-3

Printing a Test Label. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-4

Checking Sensor Mark Quality. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-5

Using Password Protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-6

Enabling the Password (System Administrators only). . . . . . . . . . . . 10-6

Service Diagnostics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-7

TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-1

Start Up and Printing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-2

Data Errors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-3

Communication Failures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-9

Data Formatting Errors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-11

Machine Faults. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-12

Hard Printer Failures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-14

SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-1

Printer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-1

Supplies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-2

Table of Contents iii

CHARACTER SETS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-1

Character Sets. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-1

Uppercase Letters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-3

Lowercase Letters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-4

Currency Symbols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-5

Punctuation and Symbols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-6

International Characters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-6

Code 128 Function Codes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-8

iv Table of Contents

GETTING STARTED 1

The Monarch

®

9403 printer prints text, graphics, and bar codes

on thermal transfer (ribbon) or thermal direct supplies. The 9403

printer prints labels continuously (in one strip).

This chapter includes information about

u

unpacking the printer.

u

connecting the power cable.

u

connecting the communications cable.

u

using the printer’s control panel.

Standard Features

The following features are standard on the 9403 printer:

u

203 dots per inch (DPI) printhead

u

2-inch by 6-inch print image

u

21-key keypad

u

2 inches per second maximum print speed

u

baud rate up to 19200

u

formats, graphics, and check digits saved in Flash memory when printer

is turned off (version 2.0 or greater)

Getting Started 1-1

Audience

The Operator’s Handbook is for the person who prints and applies

labels.

Ordering Programmer’s Manuals

The Packet Reference Manual, which describes how to create

format and batch packets for printing labels, how to configure the

printer online, how to diagnose printer error messages, and how

to perform other advanced techniques can be downloaded from

our Web site. You can print this manual or order a hard-copy

version (part number TC9800PM).

About Monarch® Quick-set Utilities

The Monarch

®

quick-set utilities are available on our Web site and

are free to download. This group of development utilities help

you configure the printer and design formats. The Label Designer

utility allows you to design fixed or variable field formats.

However, you cannot enter variable field data using quick-set.

Call Technical Support for information about complete software

packages.

Unpacking the Printer

After you unpack the printer, you should have a 9403 printer and

a power cord. Keep the box and packaging material in case the

printer ever needs repair.

1-2 Getting Started

Connecting the Power Cable

To connect the power cable:

CAUTION

The power switch must be off while you connect any

cables to the printer.

The scanner port is not active.

1. Plug the power cable into the socket. Plug the other end of

the cable into a grounded electrical outlet.

2. Turn on the printer. Press (I) to turn on and (O) to turn off the

printer.

Power

Switch

Communication

Port

Scanner

Port

Getting Started 1-3

Establishing Communications

Before the printer can accept print jobs from the host, you must

u

connect the communication cable to the printer and to the host.

u

set the communication values on the printer to match those at

the host.

Connecting the Communication Cable

Make sure the printer is off before connecting

the cable to the communication port.

Serial Communication

9 to 25 pin cable (#110451)

9 to 9 pin cable (#112073)

Connect the communication cable into the bottom port on the

printer and the appropriate port of the host.

Default Serial Port Communication Values

If you are communicating with the host through the serial port,

make sure the printer’s communication values match those at the

host. The factory default values are:

u

Baud 9600

u

Word Length 8 bit

u

Stop Bits 1 stop bit

u

Parity none

u

Flow Control DTR

To change the printer’s communication values, see Chapter 5,

"Communication Values," or your System Administrator.

1-4 Getting Started

About This Manual

This manual explains how to

u

load supplies and ribbons.

u

set up and begin using the printer.

u

select menu options.

u

enter data.

u

print supplies online or offline.

u

perform general maintenance procedures.

Menu Charts

Each chapter of this manual has one or more charts showing the

printer’s menu structure. For example:

u

Normal border boxes show the menu options.

u

Heavy border boxes show the selections to get to the

functions.

u

Black background boxes show the functions.

The black boxes show where you are; the bordered boxes show

how you got there.

SUPPLY CONTRAST DEFAULTS

PORT

SETTINGS

MAIN MENU

CANCEL

ALL

PRINT

MODE

REPEAT

BATCH

SETUP DIAG.

BATCH

ENTRY

Getting Started 1-5

Using the Keypad

You can control printer operation and enter data offline using the

keypad.

The printer has 21 keys allowing offline data entry. This keypad

includes 7 function keys, 10 numeric keys, and 4 symbol keys.

Control Keys

P Interrupts printing.

Enters an international character for printing

when you enter P plus a three-digit code.

See Appendix B for more information.

e Returns the display to the next higher menu,

when you press e

once.

In data entry, press s, then press e to

return to the Main Menu.

1-6 Getting Started

R Displays the next menu item.

L Displays the previous menu item.

E Selects the displayed menu item.

Use the alphanumeric keys to enter batch data. To switch

between characters and numbers, press s.

Startup

When you turn the printer on, the printer displays a copyright

message. You will see other messages as the printer loads

formats.

The next message depends on how your printer is set up.

u

If your printer is set for online power-up mode, you will see:

PRINT MODE

Ready

u

If your printer is set for offline power-up mode, you will see:

MAIN MENU

l Print Mode r

Getting Started 1-7

Selecting a Function

The Main Menu has several functions (operating modes). These

functions are shown in the chart below.

If the printer displays PRINT MODE Ready

when you turn it on, press e to display the

Main Menu.

To display menu options, press the arrow keys.

u

When the screen displays a right arrow, press R to display

more options.

MAIN MENU

Cancel All r

u

When the screen displays a left arrow, press L to display

more options.

MAIN MENU

l Diagnostics

u

When the screen displays a left and a right arrow, press either

L or R to display more options.

MAIN MENU

l Print Mode r

u

When you see the menu option you want, press E to select

it.

MAIN MENU

CANCEL

ALL

PRINT

MODE

REPEAT

BATCH

SETUP DIAG.

BATCH

ENTRY

1-8 Getting Started

Exiting an Option

To exit an option, press e once. You will exit to the next

higher menu.

When you press e, you lose any entries

you have made since the last time you

pressed E.

Setting Up the Printer

Before you use the 9403 printer, you will need to set up your

printer correctly. You may need to also refer to the Packet

Reference Manual.

To set up your printer:

1. Load your supply. See Chapter 3, "Loading Supplies."

2. Load your ribbon, if needed. See Chapter 2, "Loading a

Ribbon."

3. Set the supply type. See Chapter 4, "Setting Supply Options."

4. Set the printer port options to match your computer’s online

communication values. See Chapter 5, "Communication

Values."

5. Set the defaults. See Chapter 7, "Setting Defaults."

6. Download a format. See Chapter 8, "Printing" or refer to the

Packet Reference Manual.

7. Check the print quality of the bar code with a verifier or

scanner.

Getting Started 1-9

8. If you do not have a verifier or scanner, check the bar code

visually. A bar code that is in spec will have complete bars

and clear spaces. Small alphanumeric characters will look

complete. A bar code that is in spec may not look as good

as one that is too dark, but it will have the highest scan rate.

9. If your print quality is not satisfactory, adjust your print

contrast. See Chapter 6, "Setting the Contrast."

10. Download another label. If the print contrast is still not

satisfactory, call Technical Support.

Dark

IN SPEC

Light

1-10 Getting Started

LOADING SUPPLIES 2

This chapter explains how to load supplies for continuous printing.

The 9403 printer prints tags or labels in one strip.

The 9403 printer uses a standard 3-inch (76.2mm) core supply.

Loading Supplies 2-1

Supply Loading Diagram

The illustration below shows the correct routing for supplies and

ribbon.

Guide the ribbon around the ribbon guide

rollers when loading.

Ribbon

Guide

Rollers

Ribbon

Supply

Guide

Roller

Supply

Roll

2-2 Loading Supplies

La pagina sta caricando ...

Monarch 9403TM Manuale utente

Questo manuale è adatto anche per

Monarch 9403TM Manuale utente

in altre lingue

Documenti correlati

Altri documenti