Monarch M9403 Manuale utente

Categoria
Stampanti per etichette
Tipo
Manuale utente

Questo manuale è adatto anche per

Monarch
9403
Printer
TC9403OH Rev. B 4/99 ©1997 Monarch Marking Systems, Inc. All rights reserved.
Each product and program carries a respective written warranty, the only
warranty on which the customer can rely. Monarch reserves the right to make
changes in the product, the programs, and their availability at any time and
without notice. Although Monarch has made every effort to provide complete
and accurate information in this manual, Monarch shall not be liable for any
omissions or inaccuracies. Any update will be incorporated in a later edition of
this manual.
©1997 Monarch Marking Systems, Inc. All rights reserved. No part of this
publication may be reproduced, transmitted, stored in a retrieval system, or
translated into any language in any form by any means, without the prior
written permission of Monarch Marking Systems, Inc.
WARNING
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. Operation of this equipment in a residential
area is likely to cause harmful interference in which case the user will be required to correct
the interference at his own expense.
CANADIAN D.O.C. WARNING
This digital apparatus does not exceed the Class A limits for radio noise emissions from
digital apparatus set out in the Radio Interference Regulations of the Canadian Department
of Communications.
Le présent appareil numérique n’émet pas de bruits radioélectriques dépassant les limites
applicables aux appareils numériques de la classe A prescrites dans le Réglement sur le
brouillage radioélectrique édicte par le ministère des Communications du Canada.
Trademarks
Monarch is a registered trademark of Monarch Marking Systems, Inc.
9403, 9800, 9820, and 9830 are trademarks of Monarch Marking Systems, Inc.
TrueType is a trademark of Apple Computer, Inc.
Hewlett-Packard is a registered trademark of Hewlett-Packard Company.
Adobe and Acrobat are trademarks of Adobe Systems Incorporated which may be registered in certain
jurisdictions.
Microsoft and MS-DOS are registered trademarks of Microsoft Corporation.
Windows is a registered trademark of Microsoft in the U.S and other countries.
Monarch Marking Systems, Inc.
P.O. Box 608
Dayton, Ohio 45401
TABLE OF CONTENTS
GETTING STARTED. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1
Standard Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1
Audience. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2
Ordering Programmer’s Manuals. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2
About Monarch® Quick-set Utilities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2
Unpacking the Printer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2
Connecting the Power Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3
Establishing Communications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-4
Connecting the Communication Cable . . . . . . . . . . . . . . . . . . . . . . . . 1-4
Default Serial Port Communication Values . . . . . . . . . . . . . . . . . . . . . 1-4
About This Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-5
Menu Charts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-5
Using the Keypad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-6
Control Keys. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-6
Startup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-7
Selecting a Function. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-8
Exiting an Option . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-9
Setting Up the Printer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-9
LOADING SUPPLIES. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1
Supply Loading Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2
Loading Supply. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3
Printing a Test Label. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-4
LOADING RIBBON . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1
Loading a Ribbon Roll . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2
Table of Contents i
SETTING SUPPLY OPTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1
Ribbon . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2
Batch Separators. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-3
Print Position . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-4
Supply Position . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-5
Margin Position . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-6
Supply Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-8
COMMUNICATION VALUES. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-1
Baud Rate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2
Word Length. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2
Stop Bits. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-3
Parity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-3
Flow Control. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-4
Reset to Default Values . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-4
SETTING CONTRAST. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-1
SETTING DEFAULTS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-1
Monetary Sign . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-3
Secondary Sign . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-4
Decimal Places . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-5
Slashed Zero . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-5
Power-Up Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-6
Prompt Set. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-7
PRINTING. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-1
Interrupting a Batch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-2
Restarting a Batch. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-3
Canceling a Paused Batch. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-4
Repeating a Batch. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-7
Offline Printing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-8
Entering Numbers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-8
Entering Letters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-9
ii Table of Contents
Entering Symbols. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-11
Using Bar Code 128. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-11
Entering and Changing Data. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-11
Types of Data Entry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-13
Entering a Batch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-14
Using the Standard Formats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-16
CLEANING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-1
Cleaning the Printhead and Platen Roller . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-2
DIAGNOSTICS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-1
Factory Set Password. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-1
Checking the Software Version . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-2
Printing a Test Pattern. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-3
Printing a Test Label. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-4
Checking Sensor Mark Quality. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-5
Using Password Protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-6
Enabling the Password (System Administrators only). . . . . . . . . . . . 10-6
Service Diagnostics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-7
TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-1
Start Up and Printing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-2
Data Errors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-3
Communication Failures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-9
Data Formatting Errors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-11
Machine Faults. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-12
Hard Printer Failures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-14
SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-1
Printer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-1
Supplies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-2
Table of Contents iii
CHARACTER SETS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-1
Character Sets. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-1
Uppercase Letters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-3
Lowercase Letters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-4
Currency Symbols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-5
Punctuation and Symbols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-6
International Characters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-6
Code 128 Function Codes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-8
iv Table of Contents
GETTING STARTED 1
The Monarch
®
9403 printer prints text, graphics, and bar codes
on thermal transfer (ribbon) or thermal direct supplies. The 9403
printer prints labels continuously (in one strip).
This chapter includes information about
u
unpacking the printer.
u
connecting the power cable.
u
connecting the communications cable.
u
using the printer’s control panel.
Standard Features
The following features are standard on the 9403 printer:
u
203 dots per inch (DPI) printhead
u
2-inch by 6-inch print image
u
21-key keypad
u
2 inches per second maximum print speed
u
baud rate up to 19200
u
formats, graphics, and check digits saved in Flash memory when printer
is turned off (version 2.0 or greater)
Getting Started 1-1
Audience
The Operator’s Handbook is for the person who prints and applies
labels.
Ordering Programmer’s Manuals
The Packet Reference Manual, which describes how to create
format and batch packets for printing labels, how to configure the
printer online, how to diagnose printer error messages, and how
to perform other advanced techniques can be downloaded from
our Web site. You can print this manual or order a hard-copy
version (part number TC9800PM).
About Monarch® Quick-set Utilities
The Monarch
®
quick-set utilities are available on our Web site and
are free to download. This group of development utilities help
you configure the printer and design formats. The Label Designer
utility allows you to design fixed or variable field formats.
However, you cannot enter variable field data using quick-set.
Call Technical Support for information about complete software
packages.
Unpacking the Printer
After you unpack the printer, you should have a 9403 printer and
a power cord. Keep the box and packaging material in case the
printer ever needs repair.
1-2 Getting Started
Connecting the Power Cable
To connect the power cable:
CAUTION
The power switch must be off while you connect any
cables to the printer.
The scanner port is not active.
1. Plug the power cable into the socket. Plug the other end of
the cable into a grounded electrical outlet.
2. Turn on the printer. Press (I) to turn on and (O) to turn off the
printer.
Power
Switch
Communication
Port
Scanner
Port
Getting Started 1-3
Establishing Communications
Before the printer can accept print jobs from the host, you must
u
connect the communication cable to the printer and to the host.
u
set the communication values on the printer to match those at
the host.
Connecting the Communication Cable
Make sure the printer is off before connecting
the cable to the communication port.
Serial Communication
9 to 25 pin cable (#110451)
9 to 9 pin cable (#112073)
Connect the communication cable into the bottom port on the
printer and the appropriate port of the host.
Default Serial Port Communication Values
If you are communicating with the host through the serial port,
make sure the printer’s communication values match those at the
host. The factory default values are:
u
Baud 9600
u
Word Length 8 bit
u
Stop Bits 1 stop bit
u
Parity none
u
Flow Control DTR
To change the printer’s communication values, see Chapter 5,
"Communication Values," or your System Administrator.
1-4 Getting Started
About This Manual
This manual explains how to
u
load supplies and ribbons.
u
set up and begin using the printer.
u
select menu options.
u
enter data.
u
print supplies online or offline.
u
perform general maintenance procedures.
Menu Charts
Each chapter of this manual has one or more charts showing the
printer’s menu structure. For example:
u
Normal border boxes show the menu options.
u
Heavy border boxes show the selections to get to the
functions.
u
Black background boxes show the functions.
The black boxes show where you are; the bordered boxes show
how you got there.
SUPPLY CONTRAST DEFAULTS
PORT
SETTINGS
MAIN MENU
CANCEL
ALL
PRINT
MODE
REPEAT
BATCH
SETUP DIAG.
BATCH
ENTRY
Getting Started 1-5
Using the Keypad
You can control printer operation and enter data offline using the
keypad.
The printer has 21 keys allowing offline data entry. This keypad
includes 7 function keys, 10 numeric keys, and 4 symbol keys.
Control Keys
P Interrupts printing.
Enters an international character for printing
when you enter P plus a three-digit code.
See Appendix B for more information.
e Returns the display to the next higher menu,
when you press e
once.
In data entry, press s, then press e to
return to the Main Menu.
1-6 Getting Started
R Displays the next menu item.
L Displays the previous menu item.
E Selects the displayed menu item.
Use the alphanumeric keys to enter batch data. To switch
between characters and numbers, press s.
Startup
When you turn the printer on, the printer displays a copyright
message. You will see other messages as the printer loads
formats.
The next message depends on how your printer is set up.
u
If your printer is set for online power-up mode, you will see:
PRINT MODE
Ready
u
If your printer is set for offline power-up mode, you will see:
MAIN MENU
l Print Mode r
Getting Started 1-7
Selecting a Function
The Main Menu has several functions (operating modes). These
functions are shown in the chart below.
If the printer displays PRINT MODE Ready
when you turn it on, press e to display the
Main Menu.
To display menu options, press the arrow keys.
u
When the screen displays a right arrow, press R to display
more options.
MAIN MENU
Cancel All r
u
When the screen displays a left arrow, press L to display
more options.
MAIN MENU
l Diagnostics
u
When the screen displays a left and a right arrow, press either
L or R to display more options.
MAIN MENU
l Print Mode r
u
When you see the menu option you want, press E to select
it.
MAIN MENU
CANCEL
ALL
PRINT
MODE
REPEAT
BATCH
SETUP DIAG.
BATCH
ENTRY
1-8 Getting Started
Exiting an Option
To exit an option, press e once. You will exit to the next
higher menu.
When you press e, you lose any entries
you have made since the last time you
pressed E.
Setting Up the Printer
Before you use the 9403 printer, you will need to set up your
printer correctly. You may need to also refer to the Packet
Reference Manual.
To set up your printer:
1. Load your supply. See Chapter 3, "Loading Supplies."
2. Load your ribbon, if needed. See Chapter 2, "Loading a
Ribbon."
3. Set the supply type. See Chapter 4, "Setting Supply Options."
4. Set the printer port options to match your computer’s online
communication values. See Chapter 5, "Communication
Values."
5. Set the defaults. See Chapter 7, "Setting Defaults."
6. Download a format. See Chapter 8, "Printing" or refer to the
Packet Reference Manual.
7. Check the print quality of the bar code with a verifier or
scanner.
Getting Started 1-9
8. If you do not have a verifier or scanner, check the bar code
visually. A bar code that is in spec will have complete bars
and clear spaces. Small alphanumeric characters will look
complete. A bar code that is in spec may not look as good
as one that is too dark, but it will have the highest scan rate.
9. If your print quality is not satisfactory, adjust your print
contrast. See Chapter 6, "Setting the Contrast."
10. Download another label. If the print contrast is still not
satisfactory, call Technical Support.
Dark
IN SPEC
Light
1-10 Getting Started
LOADING SUPPLIES 2
This chapter explains how to load supplies for continuous printing.
The 9403 printer prints tags or labels in one strip.
The 9403 printer uses a standard 3-inch (76.2mm) core supply.
Loading Supplies 2-1
Supply Loading Diagram
The illustration below shows the correct routing for supplies and
ribbon.
Guide the ribbon around the ribbon guide
rollers when loading.
Ribbon
Guide
Rollers
Ribbon
Supply
Guide
Roller
Supply
Roll
2-2 Loading Supplies
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112

Monarch M9403 Manuale utente

Categoria
Stampanti per etichette
Tipo
Manuale utente
Questo manuale è adatto anche per

in altre lingue