ProLights 91x3 W RGB lime high power full colour LED ellipsoidal Manuale utente

ECLIPSEFC

ECLIPSELB05

ECLIPSELB10

ECLIPSELB14

ECLIPSELB19

ECLIPSELB26

ECLIPSELB36

ECLIPSELB50

USER MANUAL

MANUALE UTENTE

ECLIPSEFC

EN - IT

LED PROFILER

reproduced in any form or by any means for any commercial use.

In order to improve the quality of products, Music&Lights S.r.l. reserves the right to modify the

characteristics stated in this instruction manual at any time and without prior notice.

All revisions and updates are available in the ‘manuals’ section on site www.musiclights.it

REV. 05-11/19

1

ECLIPSEFC

Packing content

• ECLIPSEFC

• Mount bracket

• Power cable

• User manual

TABLE OF CONTENTS

Safety

General instructions

Warnings and installation precautions

1 Introduction

1. 1 Description

1. 2 Technical specifications

1. 3 The configurations

1. 4 Operating elements and connections

2 Installation

2. 1 Mounting

3 Functions and settings

3. 1 Operation

3. 2 Basic

3. 3 Menu structure

3. 4 Static mode

3. 5 Manual mode

3. 6 Master/Slave mode

3. 7 Full on mode

3. 8 White Balance mode

3. 9 Linking

3. 10 DMX configuration

3. 11 DMX mode

3. 12 Connection of the DMX line

3. 13 Construction of the DMX termination

3. 14 DMX control

3. 15 Fixture settings

3. 16 Fixure information

4 Maintenance

4. 1 Maintenance and cleaning the unit

4. 2 Fuse replacement

4. 3 Trouble shooting

2

3

5

6

7

8

9

12

13

15

16

19

21

ECLIPSEFC

2

SAFETY

General instruction

• The products referred to in this manual conform to the European Community Directives and are there-

fore marked with .

• The unit is supplied with hazardous network voltage (230V~). Leave servicing to skilled personnel only.

Never make any modiﬁcations on the unit not described in this instruction manual, otherwise you will

risk an electric shock.

• Connection must be made to a power supply system ﬁtted with eﬃcient earthing (Class I appliance ac-

cording to standard EN 60598-1). It is, moreover, recommended to protect the supply lines of the units

from indirect contact and/or shorting to earth by using appropriately sized residual current devices.

• The connection to the main network of electric distribution must be carried out by a qualiﬁed electrical

installer. Check that the main frequency and voltage correspond to those for which the unit is designed

as given on the electrical data label.

• This unit is not for home use, only professional applications.

• Never use the ﬁxture under the following conditions:

- in places wet;

- in places subject to vibrations or bumps;

- in places with a temperature of over 45 °C.

• Make certain that no inﬂammable liquids, water or metal objects enter the ﬁxture.

• Do not dismantle or modify the ﬁxture.

• All work must always be carried out by qualiﬁed technical personnel. Contact the nearest sales point for

an inspection or contact the manufacturer directly.

• If the unit is to be put out of operation deﬁnitively, take it to a local recycling

plant for a disposal which is not harmful to the environment.

Warnings and installation precautions

• If this device will be operated in any way diﬀerent to the one described in this manual, it may suﬀer

damage and the guarantee becomes void. Furthermore, any other operation may lead to dangers like

short circuit, burns, electric shock, etc.

• Before starting any maintenance work or cleaning the projector, cut oﬀ power from the main supply.

• Always additionally secure the projector with the safety rope. When carrying out any work, always com-

ply scrupulously with all the regulations (particularly regarding safety) currently in force in the country

in which the ﬁxture’s being used.

• Install the ﬁxture in a well ventilated place.

• Keep any inﬂammable material at a safe distance from the ﬁxture.

• Shields, lenses or ultraviolet screens shall be changed if they have become damaged to such an extent

that their eﬀectiveness is impaired.

• The lamp (LED) shall be changed if it has become damaged or thermally deformed.

• Never look directly at the light beam. Please note that fast changes in lighting, e. g. ﬂashing light, may

trigger epileptic seizures in photosensitive persons or persons with epilepsy.

• Do not touch the product’s housing when operating because it may be very hot.

• This product was designed and built strictly for the use indicated in this documentation. Any other use,

not expressly indicated here, could compromise the good condition/operation of the product and/or

be a source of danger.

• We decline any liability deriving from improper use of the product.

WARNING! Before carrying out any operations with the unit, carefully read this instruction

manual and keep it with cure for future reference. It contains important information about

the installation, usage and maintenance of the unit.

3

ECLIPSEFC

- 1 - INTRODUCTION

1.1 DESCRIPTION

ECLIPSEFC is a full colour LED Ellipsoidal designed to deliver a full range of pastels, whites or saturates

smoothly, consistently and both with or without gobos.

The ECLIPSEFC’s RGB + Lime LED engine has been specially engineered to provide a full spectrum and full

output in the most discerning environments, regardless of which role the ECLIPSEFC is playing.

1.2 TECHNICAL SPECIFICATIONS

LIGHT SOURCE

• Source: 91x3W RGB + lime LEDs

• Luminous ﬂux: (5°) 3’538 lm - (10°) 4’088 lm - (14°) 4’618 lm - (19°) 3’921 lm - (26°) 4’918 lm - (36°) 4’918

lm - (50°) 4’557lm

• Lux: (5°) 36’042 lx - (10°) 17’857 lx - (14°) 9’201 lx - (19°) 5’850 lx - (26°) 3’769 lx - (36°) 2’280 lx, (50°)

1’050lx @3 m full

• Source life expectancy: > 50.000 h

OPTICS

• Beam angle: optional 5° / 10° / 14° / 19° / 26° / 36° / 50° / Z15 - 30° / Z25 - 50°

• Lens type: high-quality glass lens optics

COLOUR SYSTEM

• Colour mixing: RGB + lime / full colour

• CTC: CTC control through independent DMX channel, + / - green and magenta correction and amber

shift activation by DMX

• White presets: 2.700 K ~10.000K

• Macros: built-in white presets

DYNAMIC EFFECTS

• Gobo size: B, outer: 86 mm - image: 64,5 mm - thickness: 1,1 mm

• Static colour mode: selection of static colour

• Manual colour mode: manual adjustment of colour

• Special features: automatic software colour balance when ﬁxture warms up - linear crossfade from a

white to any color and CTO applied on colours

BODY

• Body: sturdy die-cast aluminium body conceived for long-time durability

• Body colour: black, white ﬁnishing available

CONTROL

• Protocols: DMX512, RDM

• DMX channels: Theater 1 / 3 / 5 / 17 channel - Tour 4 / 8 / 11channel

• RDM: RDM ready for ﬁxture remote monitor and settings

• Display: black OLED high resolution display

• Firmware upgrade: yes, via USB - DMX interface (UPBOX1) not included

• Master/Slave: for synchronized operation of more units linked in a chain

ECLIPSEFC

4

ELECTRONICS

• Dimmer: linear 0 ~ 100% electronic dimmer

• Dimmer curves: 4 diﬀerent dimming curves available

• Strobe / shutter: 1 - 30 Hz, electronic

• Battery backup: battery backup for user operation without connecting to the main power

• Operating temperature: -10° ~ +45°

• Flicker: ﬂicker free operation

• Selectable PWM: 600 ~ 25.000 Hz

ELECTRICAL

• Power supply: 100-240 V – 50/60 Hz

• Power consumption (at 230 V): 216W

• Output (at 230 V): 6 units on a single power line

PHYSICAL

• Cooling: combination of heat pipe cooling system and low noise fan

• Sospension and ﬁxing: hanging bracket suitable for safe hanging and positioning

• Signal connection: Amphenol XLR 5p IN/OUT connectors

• Power connection: Neutrik powerCON IN/OUT connectors

• IP rating: 20

• Dimensions (WxHxD): 342x506x530 mm

• Weight: 9 kg

Technical drawing Fig.1

342 528

526

5

ECLIPSEFC

1.3 THE CONFIGURATIONS

Conﬁguration

1 Reﬂector Housing

Middle part, compatible with

5 °, 10 °, 14 °, 19°, 26°, 36°,

50° optics

2

ECLIPSELB05

Optics for ECLIPSE proﬁler,

5° beam

ECLIPSELB10

Optics for ECLIPSE proﬁler,

10° beam

ECLIPSELB14

Optics for ECLIPSE proﬁler,

14° beam

ECLIPSELB19

Optics for ECLIPSE proﬁler,

19° beam

ECLIPSELB26

Optics for ECLIPSE proﬁler,

26° beam

ECLIPSELB36

Optics for ECLIPSE proﬁler,

36° beam

ECLIPSELB50

Optics for ECLIPSE proﬁler,

50° beam

ECLIPSEFC

OR

ECLIPSEFC

6

Fig.2

Rear panel

1.4 OPERATING ELEMENTS AND CONNECTIONS

1. MOUNTING BRACKET

2. LOCKING KNOB for the mounting bracket

3. HANDLE

4. ECLIPSEFC

5. SAFETY EYE to attach safety cable.

6. SHUTTER

7. ECLIPSEMP - Aluminium middle part

8. OPTIC

9. FILTER FRAME

10. FUSE OLDER in the event of breakage, always

replace the fuse with the same type and

rating (T3.15A).

11. CONTROL PANEL with display and 4 button

used to access the control panel functions

and manage them.

12. POWER IN (PowerCON IN): for connection to a

socket (100-240V~/50-60Hz) via the supplied

mains cable.

13. POWER OUT (PowerCON OUT): connect to

supply power to the next unit.

14. DMX OUT (5-pole XLR):

1 = ground, 2 = DMX-, 3 = DMX+, 4 N/C, 5 N/C

15. DMX IN (5-pole XLR):

1 = ground, 2 = DMX-, 3 = DMX+, 4 N/C, 5 N/C

1

2

4

5

3

7

6

12

11

13

15

10

14

8

9

Fig.3

CLAMP

SAFETY

CABLE

2

1

7

ECLIPSEFC

- 2 - INSTALLATION

2.1 MOUNTING

ECLIPSEFC may be set up on a solid and even surface. The unit can also be mounted upside down to a

cross arm. For ﬁxing, stable mounting clips are required. The mounting place must be of suﬃcient stability

and be able to support a weight of 10 times of the unit’s weight.

When carrying out any installation, always comply scrupulously with all the regulations (particularly re-

garding safety) currently in force in the country in which the ﬁxture’s being used.

• Install the projector at a suitable location by means of the mounting bracket (1).

• Always additionally secure the projector with the safety rope from falling down. For this purpose, fas-

ten the safety rope at a suitable position so that the maximum fall of the projector will be 20 cm.

• Adjust the projector and use the knob (2) to slightly release or tighten the locking mechanism of the

bracket if is necessary.

ECLIPSEFC

8

- 3 - FUNCTIONS AND SETTINGS

3.1 OPERATION

Connect the supplied main cable to a socket (100-240 VAC-50/60 Hz). Then the unit is ready for operation

and can be operated via a DMX controller or it independently performs its show program in succession.

To switch oﬀ, disconnect the mains plug from the socket. For a more convenient operation it is recom-

mended to connect the unit to a socket which can be switched on and oﬀ via a light switch.

3.2 BASIC

Access control panel functions using the four panel buttons located directly underneath the OLED Display

(ﬁg.4).

MENU UP DOWN ENTER

Used to access the menu or

to return a previous menu

option

Navigates downwards through

the menu list and increases

the numeric value when in a

function

Navigates upwards through

the menu list and decreases

the numeric value when in

a function

Used to select and store the

current menu or confirm the

current function value or

option within a menu

Fig.4 - Functions of the buttons

MENU UP

DOWNENTER

9

ECLIPSEFC

3.3 MENU STRUCTURE

MENU Remark

1 DMX Address

ð

Value (001-512) Default: 001

2 DMX Channel

ð

Theater

ð

1 Ch Default: 8 CH

3 Ch

5 Ch

17 Ch

Tour

ð

4 Ch

8 Ch

11 Ch

3 Full on Mode

ð

HB Mode

Studio Mode

Default: Studio

4 Dimmer Mode

ð

Off Default: Off

Dimmer 1

Works only in DMX Channels

without DIMMER FADE

channel (1, 5, 4, 11)

Dimmer 2

Dimmer 3

5 White Calibrat.

ð

2700K Default: 3200 K

3200K

Not customizable

4200K

5500K

6000K

8000K

Full RGBL RGBL (all 255)

Custom

ð

Red

ð

Value (000-255)

User can see and edit every

single RGBL parameter

Green

ð

Value (000-255)

Blue

ð

Value (000-255)

Lime

ð

Value (000-255)

ECLIPSEFC

10

6 Stand Alone

ð

Master/Slave

ð

Master

Slave

Effects

ð

Effect 1

Effect 2

Effect 3

Effect 4

Effect 5

Statics

ð

Fixed Color

ð

R

G

B

L

RG

RB

RL

GB

GL

BL

RGB

RGL

RBL

GBL

RGBL

Default:

RGBL

ð

Color Temperature

ð

White 2700K

Default:

3200 K

White 3200K

White 4200K

White 5000K

White 5500K

White 6000K

White 7000K

White 8000K

White 9000K

White 10000K

ð

Manual color Mix

ð

Red

ð

Value (000-255)

Green

ð

Value (000-255)

Blue

ð

Value (000-255)

Lime

ð

Value (000-255)

11

ECLIPSEFC

7 White Balance

ð

Off

Manual

ð

Red

Green

Blue

Lime

ð

Value (125-255Value)

8 LED Frequency

ð

600 Hz

1200 Hz

2000 Hz

4000 Hz

25 kHz

Default: 1200 kHz

9 Fan Mode

ð

Auto Speed Default: Auto speed

High Speed

10 Back Light

ð

On Default: 10 s

10 s

20s

30 s

11 Information

ð

Fixture Hours < 9999 H >

Fixture running time

0-9999H

Version < V1.0 > Version number

UID

Settings Reset factory

ECLIPSEFC

12

3.4 STATIC MODE

This ﬁxture has the ability to accept custom static color settings. Access these chases via the control panel

on the back of the ﬁxture.

• Press the button MENU so many times until the display shows STATIC, then press the button ENTER.

• Select Fixed Color through the buttons UP/DOWN, then press the button ENTER.

• Set the colors Red, Green, Blue, Lime, Red Green, Red Blue, Red Lime, Green Blue, Green Lime, Red Green Blue, Red

Green Lime, Red Blue Lime, Green Blue Lime, Red Green Blue Lime, through the buttons UP/DOWN, then press

the button ENTER.

• Select Color Temperature through the buttons UP/DOWN, then press the button ENTER.

• Set the color temperature White 2700K, White 3200K, White 4200K, White 5000K, White 5500K, White 6000K, White

7000K, White 8000K, White 9000K, White 10000K, through the buttons UP/DOWN, then press the button EN-

TER.

• Press the MENU button to go back or to meet the waiting time to exit the setup menu.

3.5 MANUAL MODE

This mode allows to combine the colors red, green, blue and lime.

• Press the button MENU so many times until the display shows STATIC, then press the ENTER button.

• Select STATIC, and next select Manual Color Mixer through the buttons UP/DOWN, then press the ENTER

button.

• Select the color Red, Green, Blue, Lime through the buttons UP/DOWN, then press the ENTER button.

• Using UP/DOWN button, select the desired color value 000 - 255.

• Press ENTER button to continue to the next color Red, Green, Blue, Lime.

• Continue until the desired mix is obtained.

• Press the MENU button to go back or to meet the waiting time to exit the setup menu.

3.6 MASTER/SLAVE MODE

This mode will allow you to link up the units together without a controller. Choose a unit to function as the

Master. The unit must be the ﬁrst unit in line; other units will work as slave with the same eﬀect.

• Press the button MENU so many times until the display shows STAND ALONE and press the ENTER button.

• Press UP/DOWN to set the unit as master or slave (MASTER, SLAVE).

• Use standard DMX cables to daisy chain your units together via the DMX connector on the rear of the

units. For longer cable runs we suggest a terminator at the last ﬁxture (see page 15).

3.7 FULL ON MODE

• Press the MENU button until FULL ON MODE appears on the display, then press the ENTER button.

• Select the desired mode: HB (High Brightness mode, with maximum color value) or Studio, with an au-

tomatic white balance.

• Press the ENTER key to conﬁrm.

• Press the MENU button to go back or wait a few seconds to exit the setup menu.

3.8 WHITE BALANCE MODE

• To set the white balance, press the MENU button until WHITE BALANCE appears on the display, then press

the ENTER button.

• Use the UP / DOWN keys to select the color: Red, Gree, Blue, Lime. Press ENTER to conﬁrm.

• Use the UP / DOWN keys to set the desired value 125-255.

• Press the ENTER key to continue and go to the next color Red, Gree, Blue or Lime.

13

ECLIPSEFC

• Continue until the desired values are set.

• Press the MENU button to go back or wait a few seconds to exit the setup menu.

3.9 LINKING

1. Connect the DMX OUT of the master unit via 5-pole XLR cable to the DMX IN of the ﬁrst slave unit.

2. Connect the DMX OUT of the ﬁrst slave unit to the DMX IN of the second slave unit, etc. until all units

are connected in a chain.

3.10 DMX CONFIGURATION

ECLIPSEFC is equipped with diﬀerent DMX conﬁguration.

• Press the button MENU so many times until shows DMX CHANNEL, and press the button ENTER to conﬁrm.

• Select THEATER or TOUR through the buttons UP/DOWN, then press the button ENTER.

• Select the desired DMX conﬁguration (1CH - 3CH - 5CH - 17CH or 4CH - 8CH - 11CH) through the buttons UP/

DOWN.

The tables on page 16, 17 e 18 indicate the operating mode and DMX value. The ECLIPSEFC is equipped

with 5-pole XLR connections.

3.11 DMX MODE

• Press the button MENU so many times until the display shows DMX ADDRESS, and press the button ENTER

to conﬁrm.

• Press UP/DOWN button to select the desired value (001-512). Press and hold to scroll quickly.

• Press ENTER button to store.

• Press the MENU button to go back or to meet the waiting time to exit the setup menu.

To able to operate the ECLIPSE with a light controller, adjust the DMX start address for the first a DMX

channel. If e. g. address 33 on the controller is provided for controlling the function of the first DMX

channel, adjust the start address 33 on the ECLIPSE. The other functions of the light effect panel are then

automatically assigned to the following addresses.

An example with the start address 33 is shown below:

Number of

DMX channels

Start address

(example)

DMX Address

occupied

Next possible start

address for unit No. 1

Next possible start

address for unit No. 2

Next possible start

address for unit No. 3

1 33 33 34 35 36

3 33 33-34 35 37 39

4 33 33-36 37 41 45

5 33 33-37 38 43 48

8 33 33-40 41 49 57

11 33 33-43 44 55 66

17 33 33-49 50 67 84

ECLIPSEFC

14

DMX Address: 48DMX Address: 38DMX Address: 33 DMX Address: 43

Fig.5 - Example 5 DMX channels configuration

DMX512 Controller

. . . . . . . . . . . .

15

ECLIPSEFC

Fig.6

Fig.7

3.12 CONNECTION OF THE DMX LINE

DMX connection employs standard XLR connectors. Use shielded pair-twisted cables with 120Ω imped-

ance and low capacity.

The following diagram shows the connection mode:

ATTENTION

The screened parts of the cable (sleeve) must never be connected to the system’s earth, as this would

cause faulty ﬁxture and controller operation.

Over long runs can be necessary to insert a DMX level matching ampliﬁer.

For those connections the use of balanced microphone cable is not recommended because it cannot

transmit control DMX data reliably.

• Connect the controller DMX input to the DMX output of the ﬁrst unit.

• Connect the DMX output to the DMX input of the following unit. Connect again the output to the input

of the following unit until all the units are connected in chain.

• When the signal cable has to run longer distance is recommended to insert a DMX termination on the

last unit.

3.13 CONSTRUCTION OF THE DMX TERMINATION

The termination avoids the risk of DMX 512 signals being reﬂected back along the cable when they reach-

es the end of the line: under certain conditions and with certain cable lengths, this could cause them to

cancel the original signals.

The termination is prepared by soldering a 120Ω 1/4 W resistor between pins 2 and 3 of the 5-pin male XLR

connector, as shown in ﬁgure.

DMX - OUTPUT

XLR socket

DMX - INPUT

XLR plug

Pin1 : GND - Shield

Pin2 : - Negative

Pin3 : + Positive

Pin4 : N/C

Pin5 : N/C

Example:

5 pin XLR connector

4

ECLIPSEFC

16

3.14 DMX CONTROL

THEATER - 1 CHANNEL

MODE

FUNCTION DMX

Value

1 Ch

1

DIMMER

0~100% 000 - 255

NOTE - CHOOSE THE COLOR PRESET IN WHITE CALIBRATION

THEATER - 3 CHANNELS

MODE

FUNCTION DMX

Value

3 Ch

1

DIMMER

0~100% 000 - 255

2

WHITE PRESET

White 2700K

White 3200K

White 4200K

White 5000K

White 5500K

White 6000K

White 7000K

White 8000K

White 9000K

White 10000K

000 - 026

027 - 051

052 - 076

077 - 101

102 - 126

127 - 151

152 - 176

177 - 201

202 - 226

227 - 255

3

DIMMER FADE

0~100% (0-1,5 s) 000 - 255

TOUR - 4 CHANNELS

MODE

FUNCTION DMX

Value

4 Ch

1

RED

0~100% 000 - 255

2

GREEN

0~100% 000 - 255

3

BLUE

0~100% 000 - 255

4

LIME

0~100% 000 - 255

THEATER - 5 CHANNELS

MODE

FUNCTION DMX

Value

5 Ch

1

DIMMER

0~100% 000 - 255

2

RED

0~100% 000 - 255

3

GREEN

0~100% 000 - 255

4

BLUE

0~100% 000 - 255

5

LIME

0~100% 000 - 255

17

ECLIPSEFC

TOUR - 11 CHANNELS

MODE

FUNCTION DMX

Value

11 Ch

1

DIMMER

0~100% 000 - 255

2

DIMMER FINE

0~100% 000 - 255

3

RED

0~100% 000 - 255

4

RED FINE

0~100% 000 - 255

5

GREEN

0~100% 000 - 255

6

GREEN FINE

0~100% 000 - 255

7

BLUE

0~100% 000 - 255

8

BLUE FINE

0~100% 000 - 255

9

LIME

0~100% 000 - 255

10

LIME FINE

0~100% 000 - 255

11

STROBE

No Function

Strobe slow to fast

000 - 010

011 - 255

TOUR - 8 CHANNELS

MODE

FUNCTION DMX

Value

8 Ch

1

DIMMER

0~100% 000 - 255

2

RED

0~100% 000 - 255

3

GREEN

0~100% 000 - 255

4

BLUE

0~100% 000 - 255

5

LIME

0~100% 000 - 255

6

COLOR PRESET

No Function

Red

Green

Blue

Lime

Cyan

Magenta

Yellow

Orange

Light Yellow

Light Blue

Light Pink

White 2700K

White 3200K

White 4200K

White 5000K

White 5500K

White 6000K

White 7000K

White 8000K

White 9000K

White 10000K

000 - 003

004 - 015

016 - 027

028 - 039

040 - 051

052 - 063

064 - 075

076 - 087

088 - 099

100 - 111

112 - 123

124 - 135

136 - 147

148 - 159

160 - 171

172 - 183

184 - 195

196 - 207

208 - 219

220 - 231

232 - 243

244 - 255

7

STROBE

No Function

Strobe slow to fast

000 - 010

011 - 255

8

DIMMER FADE

0~100% (0-1,5 s) 000 - 255

ECLIPSEFC

18

THEATER - 17 CHANNELS

MODE

FUNCTION DMX

Value

17 Ch

1

DIMMER

0~100% 000 - 255

2

DIMMER FINE

0~100% 000 - 255

3

STROBE

No Function shutter open

Strobe effect slow to fast

No Function shutter open

Random strobe effect slow to fast

No Function shutter open

000 - 030

031 - 100

101 - 130

131 - 200

201 - 255

4

CTO

2700K -3200K

3200K - 4200K

4200K - 5000K

5000K - 5500K

5500K - 6000K

6000K - 7000K

7000K - 8000K

8000K - 9000K

9000K - 10000K

000 - 027

028 - 055

056 - 083

084 - 111

112 - 139

140 - 167

168 - 195

196 - 223

224 - 255

5

HUE

-25 to 0

No Function

0 to +25

000 - 126

127 - 127

128 - 255

6

CROSSFADE

0~100% 000 - 255

THEATER - 17 CHANNELS

MODE

FUNCTION DMX

Value

17 Ch

7

RED

0~100% 000 - 255

8

RED FINE

0~100% 000 - 255

9

GREEN

0~100% 000 - 255

10

GREEN FINE

0~100% 000 - 255

11

BLUE

0~100% 000 - 255

12

BLUE FINE

0~100% 000 - 255

13

LIME

0~100% 000 - 255

14

LIME FINE

0~100% 000 - 255

15

COLOR MACRO

No Function

Amber Shift on

Color Macro

000 - 002

003 - 005

006 - 255

16

CTO

0~100% 000 - 255

17

DIMMER FADE

Preset dimmer speed from display menu

Dimmer speed mode off

Dimmer speed mode1 (fast speed)

Dimmer speed mode2 (middle speed)

Dimmer speed mode3 (slow speed)

000 - 051

052 - 101

102 - 152

153 - 203

204 - 255

La pagina sta caricando ...

ProLights 91x3 W RGB lime high power full colour LED ellipsoidal Manuale utente

ProLights 91x3 W RGB lime high power full colour LED ellipsoidal Manuale utente

in altre lingue

Documenti correlati

Altri documenti