ProLights ECLFR2KTW Manuale utente

USER MANUAL

MANUALE UTENTE

ECLFR2KTW

EN - IT

FRESNEL PROJECTOR

reproduced in any form or by any means for any commercial use.

In order to improve the quality of products, Music&Lights S.r.l. reserves the right to modify the

characteristics stated in this instruction manual at any time and without prior notice.

All revisions and updates are available in the ‘manuals’ section on site www.musiclights.it

REV.01-05/19

1

ECLFR2KTW

Packing content

• ECLFR2KTW

• ECLFR2KTPG

• ECLFR2KBD

• ECLFRSPG

• Power cable

• User manual

TABLE OF

CONTENTS

Safety

General instructions

Warnings and installation precautions

1 Introduction

1. 1 Description and specifications

1. 2 Operating elements and connections

2 Installation

2. 1 Mounting

3 Functions and settings

3. 1 Operation

3. 2 Basic

3. 3 Menu structure

3. 4 DMX addressing

3. 5 DMX configuration

3. 6 Linking

3. 7 Screen

3. 8 Advanced

3. 9 Information

3. 10 Master/Slave mode

3. 11 Effects mode

3. 12 Fixed color

3. 13 Manual mode

3. 14 DMX control

3. 15 Connection of the DMX line

3. 16 Construction of the DMX termination

4 Maintenance

4. 1 Maintenance and cleaning the unit

4. 2 Trouble shooting

2

3

5

6

7

8

11

12

13

14

15

22

23

ECLFR2KTW

2

SAFETY

General instruction

• The products referred to in this manual conform to the European Community Directives and are there-

fore marked with .

• The unit is supplied with hazardous network voltage (230V~). Leave servicing to skilled personnel only.

Never make any modiﬁcations on the unit not described in this instruction manual, otherwise you will

risk an electric shock.

• Connection must be made to a power supply system ﬁtted with eﬃcient earthing (Class I appliance ac-

cording to standard EN 60598-1). It is, moreover, recommended to protect the supply lines of the units

from indirect contact and/or shorting to earth by using appropriately sized residual current devices.

• The connection to the main network of electric distribution must be carried out by a qualiﬁed electrical

installer. Check that the main frequency and voltage correspond to those for which the unit is designed

as given on the electrical data label.

• This unit is not for home use, only professional applications.

• Never use the ﬁxture under the following conditions:

- in places subject to vibrations or bumps;

- in places with a temperature of over 45 °C.

• Make certain that no inﬂammable liquids, water or metal objects enter the ﬁxture.

• Do not dismantle or modify the ﬁxture.

• All work must always be carried out by qualiﬁed technical personnel. Contact the nearest sales point for

an inspection or contact the manufacturer directly.

• If the unit is to be put out of operation deﬁnitively, take it to a local recycling

plant for a disposal which is not harmful to the environment.

Warnings and installation precautions

• If this device will be operated in any way diﬀerent to the one described in this manual, it may suﬀer

damage and the guarantee becomes void. Furthermore, any other operation may lead to dangers like

short circuit, burns, electric shock, etc.

• Before starting any maintenance work or cleaning the projector, cut oﬀ power from the main supply.

• Always additionally secure the projector with the safety rope. When carrying out any work, always com-

ply scrupulously with all the regulations (particularly regarding safety) currently in force in the country

in which the ﬁxture’s being used.

• Install the ﬁxture in a well ventilated place.

• Keep any inﬂammable material at a safe distance from the ﬁxture.

• Shields, lenses or ultraviolet screens shall be changed if they have become damaged to such an extent

that their eﬀectiveness is impaired.

• The lamp (LED) shall be changed if it has become damaged or thermally deformed.

• Never look directly at the light beam. Please note that fast changes in lighting, e. g. ﬂashing light, may

trigger epileptic seizures in photosensitive persons or persons with epilepsy.

• Do not touch the product’s housing when operating because it may be very hot.

• This product was designed and built strictly for the use indicated in this documentation. Any other use,

not expressly indicated here, could compromise the good condition/operation of the product and/or

be a source of danger.

• We decline any liability deriving from improper use of the product.

WARNING! Before carrying out any operations with the unit, carefully read this instruction

manual and keep it with cure for future reference. It contains important information about

the installation, usage and maintenance of the unit.

3

ECLFR2KTW

- 1 - INTRODUCTION

1.1 DESCRIPTION

ECLFR2KTW is an advanced LED replacement of traditional 2K Fresnel lamps. Oﬀering 6 colour mixing,

delivering high precision reproduction of the white spectrum from 2.800 K to 10.000 K with high CRI and

extensive colour reproduction.

The optical system harnesses the power of a 507 W custom LED with 6 colours to create an even projec-

tion, beautiful colours and precise whites, with the option to apply +/- green and magenta correction to

match other light sources.

Featuring HD dimming and tuning from 2.800 K to 10.000 K, the ECLFR2KTW delivers both on perfor-

mance and quality of output that is demanded from this level of light.

1.2 TECHNICAL SPECIFICATIONS

LIGHT SOURCE

• Source: 507W 6 colour custom LEDs source (red, orange, green, royal blue, blue, lime)

• CT: 2.800 K - 10.000K

• CRI: > 91

• R9: > 96

• Luminous ﬂux: (16°) 10’720 - (52°) 14’051lm

• Lux: (16°) 11’600 lx - (52°) 2’200lx @3 m full

• Lux: (16°) 4’176 lx - (52°) 793lx @5 m full

• Source life expectancy: >70.000 h

• Other: TM30-15RF: 88 / 107 - TLCI: 90,8

OPTICS

• Zoom: 16° - 52° manual

• Lens diameter: 250mm

• Lens type: fresnel zoom lens

• Other: spigot, barn door and gel frame included

COLOUR SYSTEM

• Colour mixing: 6 colour custom LEDs source (red, orange, green, royal blue, blue, lime)

• CTC: CTC control through independent DMX channel, + / - green and magenta correction and amber

shift activation by DMX

• White presets: 2.800 K - 10.000K

• Colour wheel: virtual colour wheel with presets

• Macros: several pre-build macros with adjustable speed

DYNAMIC EFFECTS

• Static colour mode: selection of static colour

• Manual colour mode: manual adjustment of intensity, CT, colour correction from knob

• Auto mode: built-in programs with execution speed adjustment

• Special features: linear crossfade from a white to any color and CTO applied on colours

BODY

• Hardware on-board: included ﬁlter frame, 8 doors barndoor, omega bracket spigot

• Body: sturdy die-cast aluminium body conceived for long-time durability

• Body colour: black

CONTROL

• Protocols: DMX512, RDM, local knob

• DMX channels: 1 / 2 / 5 - 1 / 5 - 2 / 7 - 1 / 7 - 2 / 8 / 9 / 12 / 13 / 16 / 19 / 21channel

ECLFR2KTW

4

• RDM: RDM ready for ﬁxture remote monitor and settings

• Display: black OLED high resolution display

• Firmware upgrade: yes, via USB - DMX interface (UPBOX1) not included

• Master/Slave: for synchronized operation of more units linked in a chain

• Other: 16bit control of dimmer and colour

ELECTRONICS

• Dimmer: linear 0 ~ 100% electronic dimmer

• Dimmer curves: 4 diﬀerent dimming curves available

• Strobe / shutter: 1 - 30 Hz, electronic

• Operating temperature: -10° ~ +45°

• Flicker: ﬂicker free frequency with adjustable PWM

• Selectable PWM: 600 ~ 25.000 Hz

ELECTRICAL

• Power consumption:

• Power supply: 100-240 V – 50/60 Hz

• Power consumption (at 230 V): 393W

• Power consumption (at 120 V): 386W

• Output (at 230 V): 5 units on a single power line

• Output (at 120 V): 2 units on a single power line

• Power factor: pF 0,95 @230 V - pF 0,99 @120 V

PHYSICAL

• Cooling: combination of heat pipe cooling system and low noise fan

• Sospension and ﬁxing: hanging bracket suitable for safe hanging and positioning

• Signal connection: Amphenol XLR 5p IN/OUT connectors

• Power connection: Neutrik powerCON TRUE1 IN/OUT connectors

• IP rating: 20

• Dimensions (WxHxD): 421x537x455mm

• Weight: 15,8kg

Technical drawing Fig.1

455

421

537

Rear panel

5

ECLFR2KTW

1.2 OPERATING ELEMENTS AND CONNECTIONS

3

4

5

98

12

13

14

10

15

11

2

1

6

7

Fig.2

1. AIR GRID for air flow outlet not to be

obstructed.

2. KNOB for inclination adjustment.

3. HANDLE

4. MOUNTING BRACKET

5. SPIGOT

6. CONTROL PANEL with display and 4 button

used to access the control panel functions

and manage them.

7. ZOOM ADJUSTMENT KNOB AND FOCUS to

zoom the projected image clearly.

8. GEL FILTER FRAME

9. BARN DOOR with directional flaps to adjust

the light beam.

10. HOLDER for locking and releasing accessories

11. MAIN FUSE HOLDER: replace a burnt-out fuse by

one of the same type only

12. POWER IN (PowerCON TRUE IN): for connection

to a socket (100-240V~/50-60Hz) via the supplied

mains cable.

13. DMX IN (5-pole XLR): 1 = ground, 2 = DMX-, 3 =

DMX+, 4 N/C, 5 N/C.

14. DMX OUT (5-pole XLR): 1 = ground, 2 = DMX-, 3 =

DMX+, 4 N/C, 5 N/C.

15. POWER OUT (PowerCON TRUE OUT): power

output for connection of multiple units in series.

ECLFR2KTW

6

Fig.4

CLAMP

- 2 - INSTALLATION

2.1 MOUNTING

ECLFR2KTW is designed for applications in exhibition areas, commercial spaces, museums, restaurant,

churches, and any other installation where size is an important factor. For ﬁxing, stable mounting clips are

required. The mounting place must be of suﬃcient stability and be able to support a weight of 10 times

of the unit’s weight.

When carrying out any installation, always comply scrupulously with all the regulations (particularly re-

garding safety) currently in force in the country in which the ﬁxture’s being used.

• Install the projector at a suitable location.

• Always additionally secure the projector with the safety rope from falling down. For this purpose, fas-

ten the safety rope at a suitable position so that the maximum fall of the projector will be 20 cm. The

adjust the projector and use the knobs.

NOTE - For the installation of the ECLFR2KTW make sure that the ridge of the adaptor is in with the groove

of the track. Turn knobs 90° to connect the adaptor to the circuit. Please see the ﬁgure 4.

7

ECLFR2KTW

MENU

UP DOWN ENTER

Used to access the menu or

to return a previous menu

option

Navigates downwards through

the menu list and increases

the numeric value when in a

function

Navigates upwards through

the menu list and decreases

the numeric value when in

a function

Used to select and store the

current menu or confirm the

current function value or

option within a menu

Fig.5

Menu

Enter

Up

Down

- 3 - FUNCTIONS AND SETTINGS

3.1 OPERATION

To turn ECLFR2KTW connect the supplied main cable to a socket (100-240 VAC-50/60 Hz). Then the unit

is ready for operation and can be operated via a DMX controller. To switch oﬀ, disconnect the mains plug

from the socket. For a more convenient operation it is recommended to connect the unit to a socket which

can be switched on and oﬀ via a light switch.

3.2 BASIC

The ECLFR2KTW has a display and 4 button for access to the control panel functions (ﬁg.5).

MODE LEFT KNOB

CENTRAL KNOB RIGHT KNOB

CCT Dimmer (0 - 255) +/- Green (-25-+25) Control temperature

(CT): 2800 K - 10000 K

HSI Dimmer (0 - 255) Colors (0 - 255) Saturation (SAT): 0 - 255

MENU

1 CONNECT

ð

DMX Address

ð

Value (001-512)

Default: 1

DMX Mode

ð

1CH

ð

Amber Shift on

Default: 19CH

ð

Color

Temperature

ð

CTO 2800 - 10000K

Hue (025~025)

ð

Color Picker

ð

3200K

71

97

100

...

777

ð

Customization

ð

Red (000~255)

Orange (000~255)

Green (000~255)

Royal Blue (000~255)

Blue (000~255)

Lime (000~255)

ð

2CH

ð

Amber Shift on

ð

Color

Temperature

ð

CTO 2800 - 10000K

Hue (025~025)

ð

Color Picker

ð

3200K

71

97

100

...

777

ð

Customization

ð

Red (000~255)

Orange (000~255)

Green (000~255)

Royal Blue (000~255)

Blue (000~255)

Lime (000~255)

ð

5CH1

ð

Color Picker

ð

5CH2

ð

7CH1

ð

7CH2

ð

No Action

3200K

71

97

100

...

777

ð

8CH

ð

9CH

ð

12CH

ð

13CH

ð

16CH

ð

19CH

ð

21CH

2 SETUP

ð

Screen

ð

Back Light

ð

On

10 s

20 s

30 s

Default: 10 s

ð

Flip Display

ð

NO-Yes Default: No

ð

Key Lock

ð

NO-Yes Default: No

ECLFR2KTW

8

3.3 MENU STRUCTURE

3 ADVANCED

ð

Full On Mode

ð

HB

Studio

Default: Studio

Dimmer Mode

ð

Off

Dimmer 1

Dimmer 2

Dimmer 3

Default: Off

White Balance

ð

Off

Adjust

ð

Red (125~255)

Orange (125~255)

Green (125~255)

Royal Blue (125~255)

Blue (125~255)

Lime (125~255)

Default: Off

Led Frequency

ð

600Hz

1200 Hz

2000 Hz

4000 Hz

6000Hz

25kHZ

Default: 1200Hz

Fan Mode

ð

Auto

On

Oﬀ

Silent

Default : Auto

Factory Reload

ð

No-Yes No-Yes Default: No

4 INFORMATION

ð

Fixture TIme

ð

0-9999

Version

ð

V1.0

UID

ð

15D00229****

5 STAND ALONE

ð

Master/Slave

ð

Master

Slave

Default : Slave

Eﬀects

ð

Eﬀect1

Eﬀect2

Eﬀect3

Eﬀect4

ð

(1~100) Default: Effect4

Speed=100

CCT

HSI

Color Tempera-

ture

ð

2800K

3000K

3200K

3400K

3600K

3800K

4000K

4200K

4400K

4600K

4800K

5000K

5200K

5400K

5600K

5800K

6000K

6200K

6400K

6800K

7000K

7200K

7400K

7600K

7800K

8000K

8200K

8400K

8600K

8800K

9000K

9200K

9400K

9600K

9800K

10000K

ð

Dimmer (000~255)

Hue (025~025)

Default : 6000K

Dimmer=255

Hue=0

9

ECLFR2KTW

Fixed Color

ð

R

O

G

RB

B

L

R.0

R.G

R.RB

R.B

R.L

O.G

O.RB

O.B

O.L

G.RB

G.B

G.L

RB.B

RB.L

B.L

R.O.G

R.O.RB

R.O.B

R.O.L

R.G.RB

R.G.B

R.G.L

R.RB.B

R.RB.L

R.B.L

O.G.RB

O.G.B

O.G.L

O.RB.B

O.RB.L

O.B.L

G.RB.B

G.RB.L

G.B.L

RB.B.L

R.O.G.RB

R.O.G.B

R.O.G.L

R.O.RB.B

R.O.RB.L

R.O.B.L

R.G.RB.B

R.G.RB.L

R.G.B.L

R.RB.B.L

O.G.RB.B

O.G.RB.L

O.G.B.L

O.RB.B.L

G.RB.B.L

R.O.G.RB.B

R.O.G.RB.L

R.O.G.B.L

R.O.RB.B.L

R.G.RB.B.L

O.G.RB.B.L

R.O.G.RB.B.L

ð

Dimmer (000~255) Default:

R.O.G.RB.B.L

Dimmer=255

Color Picker

ð

3200K

71

97

100

101

102

103

104

105

106

107

110

111

113

115

116

117

118

119

120

121

122

124

126

128

130

132

134

135

136

137

138

139

141

144

147

151

152

156

157

158

161

164

165

166

170

174

179

180

181

182

195

197

198

200

201

202

203

204

205

206

702

730

777

ð

Dimmer (000~255) Default: 3200K

Manual Color

ð

Red

Orange

Green

Royal Blue

Blue

Lime

ð

(000~255) Default:

RGBW=255

ECLFR2KTW

10

11

ECLFR2KTW

3.4 DMX ADDRESSING

To set DMX addressing follow the instructions below:

• Press the button MENU to enter the menu mode.

• Press UP/DOWN button to select Connect. Press the ENTER button to conﬁrm.

• Press UP/DOWN button to select DMX Address. Press the ENTER button to conﬁrm.

• Press UP/DOWN button to select the desired value 001-512. Press the ENTER button to conﬁrm.

• Press the MENU button to go back or to meet the waiting time to exit the setup menu.

To able to operate the ECLFR2KTW with a light controller, adjust the DMX start address for the ﬁrst a

DMX channel. If e. g. address 33 on the controller is provided for controlling the function of the ﬁrst DMX

channel, adjust the start address 33 on the ECLFR2KTW. The other functions of the light eﬀect panel are

then automatically assigned to the following addresses.

3.5 DMX CONFIGURATION

The ECLFR2KTW has diﬀerent DMX channels conﬁgurations available selectable through the control panel.

• Press the button MENU to enter the menu mode.

• Press UP/DOWN button to select Connect. Press the ENTER button to conﬁrm.

• Press UP/DOWN button to select DMX mode. Then press the ENTER button to conﬁrm.

• Press UP/DOWN button to select the desired conﬁguration (1CH, 2CH 2, 5CH1, 5CH2, 7CH1, 7CH2, 8CH , 12CH ,

13CH, 16CH, 19CH, 21CH); then press the ENTER button to save.

• Press the MENU button to go back or to meet the waiting time to exit the setup menu.

The tables on page 15, 16, 17, 18, 19, 20, 21 indicate the operating mode and DMX value. The ECLFR2KTW

is equipped with 5-pole XLR connections.

3.6 LINKING

Several units may be interconnected; follow the instructions below:

1. Connect the DMX OUT of the master unit via 5-pole XLR cable to the DMX IN of the ﬁrst slave unit.

2. Connect the DMX OUT of the ﬁrst slave unit to the DMX IN of the second slave unit, etc. until all units

are connected in a chain.

Use standard DMX cables to daisy chain your units together via the DMX connector on the rear of the

units. For longer cable runs we suggest a terminator at the last ﬁxture (see page 22).

. . . . . . . . . . . .

DMX Address: 33 DMX Address: 48DMX Address: 38 DMX Address: 43

Fig.5 - Example 5 DMX channels configuration

. . . . . . . . . . . .

DMX512 Controller

ECLFR2KTW

12

Numero

canali DMX

Indirizzo di

start (esempio)

Indirizzo DMX

occupati

Prossimo indirizzo di start

possibile per unità n°1

Prossimo indirizzo di start

possibile per unità n°2

Prossimo indirizzo di start

possibile per unità n°3

1 33 33 34 35 36

2 33 33-34 35 37 39

5 33 33 - 37 38 43 48

7 33 33 - 39 40 47 54

8 33 33 - 40 41 49 57

9 33 33 - 41 42 51 60

12 33 33 - 44 45 57 69

13 33 33 - 45 46 59 72

16 33 33 - 48 49 65 81

19 33 33 - 51 52 71 90

21 33 33 - 53 54 75 96

3.7 SCREEN

It is possible to modify the following parameters, related to the display, following the same procedure:

• Press the button MENU to enter the menu mode.

• Press UP/DOWN button to scroll through the menu, select Set Up, then press the ENTER button to access

the next menu.

• Press UP/DOWN button to select Screen and press the ENTER button to proceed.

• Select the proposed option and press the ENTER button to conﬁrm.

- Backlight - Auto Oﬀ display backlight. This function allows you to switch oﬀ automatically the back-

lighting of the display after a certain time which can be set using the directional keys. To have the

display always on select On or set a value between those shown (10s, 20s, 30s) to turn oﬀ the display

once the chosen time has elapsed, after exiting the menu.

- Flip Display - Display orientation. This feature allows you to rotate the display by 180 ° to get a better

view of the display when the unit is hanging upside down. Select Yes to activate the function, No to

deactivate it.

- Key lock - With this function, you can lock the keys on the control panel to prevent, for example, tam-

pering with the settings. If this function is activated, the keys are locked automatically. To disable or

temporarily disable or disable the key lock function, press the keys in the following order to regain

access to the menu commands: UP, DOWN, UP, DOWN, ENTER. Select Yes to activate the function or

No to deactivate it.

• Press the ENTER button to conﬁrm the selection.

• Press the MENU button to go back or to meet the waiting time to exit the setup menu.

3.8 ADVANCED

You can change the parameters for the device by following these steps:

• Press the button MENU to enter the menu mode.

• Press UP/DOWN button to select the Advanced. Press the ENTER button to conﬁrm.

• Press UP/DOWN button to select the desired option and press the ENTER button to conﬁrm:

- Full On Mode - Select the Full on Mode function to set the HB mode (High Brightness Mode, with the

13

ECLFR2KTW

maxinum value of the colors) or Studio mode with a automatic white balance.

- Dimmer Mode - Adjusting the dimmer. Enter in Dimmer Mode to select specific dimming curve.

Particularly when set:

• Off: The increase in light intensity is linear.

• Dimmer 1: dimmer curve with low fade.

• Dimmer 2: dimmer curve with medium fade.

• Dimmer 3: dimmer curve with high fade.

- White Balance - To balance the white on each color. Select the color (Red, Orange, Green, Royal Blue, Blue

and Lime) and the value (125-255) using the UP / DOWN button and press the ENTER button to conﬁrm.

- LED Frequency - To adjust the frequency of the LEDs. Select the frequency 600 Hz - 25 KHz using the UP /

DOWN button and press ENTER to conﬁrm the selection.

- Fan Mode - Fan Speed. Select the fan speed (Auto, On, Off, Silent) using the UP / DOWN button.

- Factory Reload - To reset the unit. Select Yes or No and select the UP / DOWN button to confirm.

• Press the MENU button to go back or to meet the waiting time to exit the setup menu.

3.9 INFORMATION

To view all the information on the device, proceed as follows:

• Press the button MENU to enter the menu mode.

• Press UP/DOWN button to select Information, then press the ENTER button to access the next menu.

• Press UP/DOWN button to scroll through the menu, then select one of the following informationa and

press the ENTER button to display it.

- Fixture Time - To view the operating time of the projector.

- Software Version - To view the firmware version will show on the display.

- UID - To view the identiﬁcation ID for the RDM control.

• Press the MENU button to go back or to meet the waiting time to exit the setup menu.

3.10 MASTER/SLAVE MODE

This mode will allow you to link up the units together without a controller. Choose a unit to function as the

Master. The unit must be the ﬁrst unit in line; other units will work as slave.

• Press the button MENU so many times until the display shows Stand Alone, then press the ENTER button

to select Master/Slave.

• Press UP/DOWN button to select the desired mode and then press ENTER to conﬁrm.

• Press the MENU button to go back or to meet the waiting time to exit the setup menu.

• Use standard DMX cables to daisy chain your units together via the DMX connector on the rear of the

units. For longer cable runs we suggest a terminator at the last ﬁxture (see page 13).

• Set the slaves to the same DMX modes.

NOTE: the unit, set in Static or Eﬀect mode, always appears to be Master.

3.11 EFFECTS MODE

This ﬁxture has a built-in automatic program. To access this, please see the below instructions:

• To enter the Eﬀects mode, press the ENTER button to access the menu.

• Press UP/DOWN button to select Stand Alone, then select Eﬀect. Press ENTER to conﬁrm

• Press UP/DOWN button to select the desired program Eﬀect 1, Eﬀect 2, Eﬀect 3, Eﬀect 4, then press ENTER

to conﬁrm.

• Set the value (1 - 100), then press the ENTER button to conﬁrm.

NOTE: after selecting the described mode, the unit will be Master.

ECLFR2KTW

14

3.12 FIXED COLORS

This ﬁxture has the ability to accept custom static color settings. Access these chases via the control panel

on the back of the ﬁxture.

• Press the MENU button so many times until the display shows Stand Alone, then press the ENTER button.

• Using UP/DOWN button select Static, then press ENTER.

• Select Fixed Color through the UP/DOWN buttons, then press the ENTER button.

• Set the colors R , O, G, W, RB, B, L, R.O.G.RB.B.L through the UP/DOWN buttons, then press the ENTER button.

• Press the MENU button to go back or to meet the waiting time to exit the setup menu.

NOTE: after selecting the described mode, the unit will be Master.

3.13 MANUAL MODE

This mode allows to combine the colors (Red, Orange, Green, Royal Blue, Blue and Lime).

• Press the MENU button so many times until the display shows Stand Alone, then press the ENTER button..

• Select Manual Color through the UP/DOWN buttons, then press the ENTER button.

• Select the color Red, Orange, Green, Royal Blue, Blue and Lime through the UP/DOWN buttons, then press the

ENTER button.

• Using UP/DOWN buttons, select the desired color value 000 - 255.

• Press the ENTER button to continue to the next color Red, Orange, Green, Royal Blue, Blue and Lime.

• Continue until the desired mix is obtained.

• Press the MENU button to go back or to meet the waiting time to exit the setup menu.

NOTE: after selecting the described mode, the unit will be Master.

NOTE: If the projector is in Blackout mode before to receive DMX signal, and if the DMX signal is lost, the

projector will remain on according to the last received DMX value. If the projector was in STATIC or AUTO

mode before to receive DMX signal, if the DMX signal is lost, the projector will return to the previously set

STATIC or AUTO

1 CHANNEL

MODE

FUNCTION DMX

Value

1 Ch

1

DIMMER

0~100% 000 - 255

2 CHANNELS

MODE

FUNCTION DMX

Value

2 Ch

1

DIMMER

0~100% 000 - 255

2

DIMMER SPEED MODE

Preset dimmer speed from display menu

Dimmer speed mode off

Dimmer speed mode1 (fast speed)

Dimmer speed mode2 (middle speed)

Dimmer speed mode3 (slow speed)

000 - 051

052 - 101

102 - 152

153 - 203

204 - 255

5 CHANNELS 1

MODE

FUNCTION DMX

Value

5 Ch1

1

DIMMER

0~100% 000 - 255

2

CTO

2800K - 3000K

3000K - 3200K

3200K - 3400K

3400K - 3600K

3600K - 3800K

3800K - 4000K

4000K - 4200K

4200K - 4400K

4400K - 4600K

4600K - 4800K

4800K - 5000K

5000K - 5200K

5200K - 5400K

5400K - 5600K

5600K - 5800K

5800K - 6000K

6000K - 6200K

6200K - 6400K

6400K - 6600K

6600K - 6800K

6800K - 7000K

7000K - 7200K

7200K - 7400K

7400K - 7600K

7600K - 7800K

7800K - 8000K

8000K - 8200K

8200K - 8400K

8400K - 8600K

8600K - 8800K

8800K - 9000K

9000K - 9200K

9200K - 9400K

9400K - 9600K

9600K - 9800K

9800K - 10000K

000 - 007

007 - 014

014 - 021

021 - 028

028 - 035

035 - 042

042 - 049

049 - 056

056 - 063

063 - 070

070 - 077

077 - 084

084 - 091

091 - 098

098 - 105

105 - 112

112 - 119

119 - 126

126 - 133

133 - 140

140 - 147

147 - 154

154 - 161

161 - 168

168 - 175

175 - 182

182 - 189

189 - 196

196 - 203

203 - 210

210 - 217

217 - 224

224 - 231

231 - 238

238 - 245

245 - 255

3

HUE

0

-25°~25°

000 - 000

001 - 255

4

COLOR MACRO

No Function

Amber Shift on

Color Macro

000 - 002

003 - 005

006 - 255

5

DIMMER SPEED MODE

Preset dimmer speed from display menu

Dimmer speed mode off

Dimmer speed mode1 (fast speed)

Dimmer speed mode2 (middle speed)

Dimmer speed mode3 (slow speed)

000 - 051

052 - 101

102 - 152

153 - 203

204 - 255

15

ECLFR2KTW

3.14 CHANNELS DMX

5 CHANNELS 2

MODE

FUNCTION DMX

Value

5 Ch2

1

DIMMER

0~100% 000 - 255

2

DIMMER FINE

0~100% 000 - 255

3

CTO

2800K - 3000K

3000K - 3200K

3200K - 3400K

3400K - 3600K

3600K - 3800K

3800K - 4000K

4000K - 4200K

4200K - 4400K

4400K - 4600K

4600K - 4800K

4800K - 5000K

5000K - 5200K

5200K - 5400K

5400K - 5600K

5600K - 5800K

5800K - 6000K

6000K - 6200K

6200K - 6400K

6400K - 6600K

6600K - 6800K

6800K - 7000K

7000K - 7200K

7200K - 7400K

7400K - 7600K

7600K - 7800K

7800K - 8000K

8000K - 8200K

8200K - 8400K

8400K - 8600K

8600K - 8800K

8800K - 9000K

9000K - 9200K

9200K - 9400K

9400K - 9600K

9600K - 9800K

9800K - 10000K

000 - 007

007 - 014

014 - 021

021 - 028

028 - 035

035 - 042

042 - 049

049 - 056

056 - 063

063 - 070

070 - 077

077 - 084

084 - 091

091 - 098

098 - 105

105 - 112

112 - 119

119 - 126

126 - 133

133 - 140

140 - 147

147 - 154

154 - 161

161 - 168

168 - 175

175 - 182

182 - 189

189 - 196

196 - 203

203 - 210

210 - 217

217 - 224

224 - 231

231 - 238

238 - 245

245 - 255

4

COLOR MACRO

No Function

Amber Shift on

Color Macro

000 - 002

003 - 005

006 - 255

5

DIMMER SPEED MODE

Preset dimmer speed from display menu

Dimmer speed mode off

Dimmer speed mode1 (fast speed)

Dimmer speed mode2 (middle speed)

Dimmer speed mode3 (slow speed)

000 - 051

052 - 101

102 - 152

153 - 203

204 - 255

7 CHANNELS 1

MODE

FUNCTION DMX

Value

7 Ch1

1

RED

0~100% 000 - 255

2

ORANGE

0~100% 000 - 255

3

GREEN

0~100% 000 - 255

4

ROYAL BLUE

0~100% 000 - 255

5

BLUE

0~100%

000 - 255

6

LIME

0~100% 000 - 255

7

DIMMER SPEED MODE

Preset dimmer speed from display menu

Dimmer speed mode off

Dimmer speed mode1 (fast speed)

Dimmer speed mode2 (middle speed)

Dimmer speed mode3 (slow speed)

000 - 051

052 - 101

102 - 152

153 - 203

204 - 255

7 CHANNELS 2

MODE

FUNCTION DMX

Value

7 Ch2

1

DIMMER

0~100% 000 - 255

2

RED

0~100% 000 - 255

3

ORANGE

0~100% 000 - 255

4

GREEN

0~100% 000 - 255

5

ROYAL BLUE

0~100% 000 - 255

6

BLUE

0~100%

000 - 255

7

LIME

0~100% 000 - 255

ECLFR2KTW

16

8 CHANNELS

MODE

FUNCTION DMX

Value

8 Ch

1

COLOR PICKER

No Funciton

3200K

71

97

100

101

102

103

104

105

106

107

110

111

113

115

116

117

118

119

120

121

122

124

126

128

130

132

134

135

136

137

138

139

141

144

147

151

152

156

157

158

161

164

165

166

170

174

179

180

181

182

195

197

000 - 000

001 - 003

004 - 007

008 - 011

012 - 015

016 - 019

020 - 023

024 - 027

028 - 031

032 - 035

036 - 039

040 - 043

044 - 047

048 - 051

052 - 055

056 - 059

060 - 063

064 - 067

068 - 071

072 - 075

076 - 079

080 - 083

084-087

088 - 091

092 - 095

096-099

100 - 103

104 - 107

108 - 111

112 - 115

116 - 119

120 - 123

124 - 127

128 - 131

132 - 135

136 - 139

140 - 143

144 - 147

148 - 151

152 - 155

156 - 159

160 - 163

164 - 167

168 - 171

172 - 175

176 - 179

180 - 183

184 - 187

188 - 191

192 - 195

196 - 199

200 - 203

204 - 207

208 - 211

8 CHANNELS

MODE

FUNCTION DMX

Value

8 Ch

198

200

201

202

203

204

205

206

702

730

777

212 - 215

216 - 219

220 - 223

224 - 227

228 - 231

232 - 235

236 - 239

240 - 243

244 - 247

248 - 251

252 - 255

2

DIMMER

0~100% 000 - 255

3

RED

0~100% 000 - 255

4

ORANGE

0~100% 000 - 255

5

GREEN

0~100% 000 - 255

6

ROYAL BLUE

0~100% 000 - 255

7

BLUE

0~100%

000 - 255

8

LIME

0~100% 000 - 255

17

ECLFR2KTW

12 CHANNELS

MODE

FUNCTION DMX

Value

12 Ch

1

DIMMER

0~100% 000 - 255

2

STROBE

No Function

Strobe slow to fast

000 - 010

011 - 255

3 RED 000 - 255

4 ORANGE 000 - 255

5 GREEN 000 - 255

6 ROYAL BLUE 000 - 255

7 BLUE 000 - 255

8 LIME 000 - 255

9

CTO

2800K - 3000K

3000K - 3200K

3200K - 3400K

3400K - 3600K

3600K - 3800K

3800K - 4000K

4000K - 4200K

4200K - 4400K

4400K - 4600K

4600K - 4800K

4800K - 5000K

5000K - 5200K

5200K - 5400K

5400K - 5600K

5600K - 5800K

5800K - 6000K

6000K - 6200K

6200K - 6400K

6400K - 6600K

6600K - 6800K

6800K - 7000K

7000K - 7200K

7200K - 7400K

7400K - 7600K

7600K - 7800K

7800K - 8000K

8000K - 8200K

8200K - 8400K

8400K - 8600K

8600K - 8800K

8800K - 9000K

9000K - 9200K

9200K - 9400K

9400K - 9600K

9600K - 9800K

9800K - 10000K

No Funciton

000 - 007

007 - 014

014 - 021

021 - 028

028 - 035

035 - 042

042 - 049

049 - 056

056 - 063

063 - 070

070 - 077

077 - 084

084 - 091

091 - 098

098 - 105

105 - 112

112 - 119

119 - 126

126 - 133

133 - 140

140 - 147

147 - 154

154 - 161

161 - 168

168 - 175

175 - 182

182 - 189

189 - 196

196 - 203

203 - 210

210 - 217

217 - 224

224 - 231

231 - 238

238 - 245

245 - 252

253 - 255

9 CHANNELS

MODE

FUNCTION DMX

Value

9 Ch

1

DIMMER

0~100% 000 - 255

2

RED

0~100% 000 - 255

3

ORANGE

0~100% 000 - 255

4

GREEN

0~100% 000 - 255

5

ROYAL BLUE

0~100% 000 - 255

6

BLUE

0~100%

000 - 255

7

LIME

0~100% 000 - 255

8

STROBE

No Function

Strobe slow to fast

000 - 010

011 - 255

9

DIMMER SPEED MODE

Preset dimmer speed from display menu

Dimmer speed mode off

Dimmer speed mode1 (fast speed)

Dimmer speed mode2 (middle speed)

Dimmer speed mode3 (slow speed)

000 - 051

052 - 101

102 - 152

153 - 203

204 - 255

ECLFR2KTW

18

La pagina sta caricando ...

ProLights ECLFR2KTW Manuale utente

ProLights ECLFR2KTW Manuale utente

in altre lingue

Documenti correlati

Altri documenti