AJA KONA LHi Manuale utente

KONA LH

Capture, Display, Convert

Version 15.5

Published November 12, 2019

Installation and Operation Manual

KONA LH Capture, Display, Convert v15.5 2 www.aja.com

Notices

Trademarks

AJA® and Because it matters.® are registered trademarks of AJA Video Systems, Inc.

for use with most AJA products. AJA™ is a trademark of AJA Video Systems, Inc. for

use with recorder, router, software and camera products. Because it matters.™ is a

trademark of AJA Video Systems, Inc. for use with camera products.

CION®, Corvid Ultra®, lo®, Ki Pro®, KONA®, KUMO®, ROI® and T-Tap® are registered

trademarks of AJA Video Systems, Inc.

AJA Control Room™, KiStor™, Science of the Beautiful™, TruScale™, TruZoom™,

V2Analog™ and V2Digital™ are trademarks of AJA Video Systems, Inc.

All other trademarks are the property of their respective owners.

Copyright

this manual is subject to change without notice. No part of the document may be

reproduced or transmitted in any form, or by any means, electronic or mechanical,

including photocopying or recording, without the express written permission of AJA

Video Systems, Inc.

Contacting AJA Support

When calling for support, have all information at hand prior to calling. To contact AJA

for sales or support, use any of the following methods:

Telephone +1.530.271.3190

FAX +1.530.271.3140

Web https://www.aja.com

Support Email suppor[email protected]

Sales Email [email protected]

KONA LH Capture, Display, Convert v15.5 3 www.aja.com

Contents

Notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

Trademarks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Copyright . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Contacting AJA Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Chapter 1 – Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . .5

Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

KONA Models Covered in this Manual. . . . . . . . . . . . . . . . . . . . . . . . .5

AJA Software & Utilities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

System Requirements. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

Disk Storage Methods . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

KONA LHi Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

KONA LHe Plus Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Cable Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

KONA LHi and LHe Plus Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Using Breakout Boxes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

KLHi-Box for KONA LHi . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

KL-Box for KONA LHe Plus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Detailed Connector Descriptions . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

LHe Plus/LHi Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

LHi Only Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Chapter 2 – Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Installation Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

AJA System Test Application. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Unpacking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Shipping Box Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Installing the KONA Card. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Cabling the System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

KONA LHi Cable Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

KONA LHe Plus Cable Connections. . . . . . . . . . . . . . . . . . . . . . . . . . 16

Installing KONA LH Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Download . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Software Package Installation and Re-installation . . . . . . . . . . . . . . . . 17

Firmware Update Procedure. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Chapter 3 – Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . .19

Using KONA with Professional Video /Audio Software . . . . . . . . . . . . . . . 19

Capture Formats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

AJA Control Panel Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

AJA Control Panel Operating Modes. . . . . . . . . . . . . . . . . . . . . . . . . 19

AJA Control Panel User Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Controlling Application . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Presets. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Default Preferences . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Function Screens. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Control Panel Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Control Screen. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Format Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Conversion Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Input Select Screen. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

SDI Output Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

HDMI Screen (LHi Only). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

Analog Out Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

Video Setup Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

Audio Setup Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

DS Keyer Screen. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

LUT Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

KONA LH Capture, Display, Convert v15.5 4 www.aja.com

Timecode Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

Presets Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

Firmware Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

Info Screen. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

Using Multiple AJA Products . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

Notes on Using Multiple AJA Products: . . . . . . . . . . . . . . . . . . . . . . . 46

Additional Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

About 8-bit Versus 10-bit Video. . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

About 12-bit Video . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

About RGB and YCbCr (YUV) Video . . . . . . . . . . . . . . . . . . . . . . . . . 47

Appendix A – Specications . . . . . . . . . . . . . . . . . . . . . . . . 48

KONA LHi Tech Specs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

KONA LHe Plus Tech Specs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51

Appendix B – Safety & Compliance. . . . . . . . . . . . . . . . . . . .54

Warranty and Liability Information . . . . . . . . . . . . . . . . . . . .61

Limited Warranty on Hardware. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61

Limitation of Liability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61

Governing Law and Language; Your Rights. . . . . . . . . . . . . . . . . . . . . . 62

Index. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .63

KONA LH Capture, Display, Convert v15.5 5 www.aja.com

Chapter 1 – Introduction

Overview

The AJA KONA series brings the highest quality 2K, HD, and SD video and audio to

computers running Mac, Windows or Linux Operating Systems.

KONA Models Covered in this Manual

This manual covers the installation and operation of these models:

• KONA LHi

• KONA LHe Plus

AJA Software & Utilities

AJA’s KONA software and hardware were developed for powerful integrated

video/audio capture, editing, and production with a variety of 3rd-party

software. With KONA and a qualified computer, you have the ultimate system

for production, post-production, broadcast, and streaming work. AJA software

is distributed as a unified package which includes all the software, firmware,

plugins, and utility programs for AJA’s Io, KONA, and T-TAP products.

Four retail packages are available, one for Mac, one for Windows, and two for

Linux (one package for Ubuntu, one package for Red Hat/CentOS).

NOTE: Support for the Linux OS retail drivers is based on the Linux application used and

comes from the application’s vendor.

To download AJA software, go to the AJA website:

https://www.aja.com/en/support/downloads

For a complete software compatibility list, see the AJA website link:

https://www.aja.com/en/category/edit/compatibility

Mac, Windows and Linux Packages

These packages include:

Drivers

AJA device drivers for tightly integrated hardware/software operation.

KONA LH Capture, Display, Convert v15.5 6 www.aja.com

AJA Control Panel

The Control Panel provides:

• Source selection and control of your AJA hardware.

• A block diagram to show visually what routing and processing is being

performed.

AJA Control Room

Control Room is a cross-platform software application for ingest, playback and

output with AJA devices.

AJA System Test

System Test provides accurate and detailed evaluations of drive and system

performance statistics, allowing you to measure the capabilities of your system

for recording and playing back various resolutions and codecs. The application

includes:

• System Disk Test

• AJA Device Test

• Disk + Device Test

• System Report

The application tests Read and Write, Capture and Playback speeds in both

Megabytes per second and Frames per second. The disk speed tests differ from

standard disk I/O performance applications in that they specifically test the

system under conditions typically encountered with video capture, playback, and

editing.

NOTE: Theoretically the best test is to fill your storage disk to 80% and then test capture

at the highest data rate you will use.

Additional with Mac and Windows Packages

3rd-Party Plugins

AJA provided plugins for popular 3rd-party Professional Video Applications from

Adobe, Avid, Apple, Telestream, and others.

System Requirements

AJA Video recommends that your system meet minimum hardware and software

requirements to achieve a satisfactory level of performance. Updates to system

requirements are subject to change.

NOTE: See Software Vendor system requirements for GPU recommendations and

additional hardware requirements and recommendations.

AJA recommends:

• Mac OS 10.12 Sierra or later (including 10.15 Catalina)

• Win 10 or later with all updates

• Linux Redhat/CentOS 7

• Linux Ubuntu 14.04 LTS and Ubuntu 16.04 LTS

• 2.5 GHz quad core i7 minimum, for HD

• 3.5 GHz eight core minimum, faster processors and more cores recommended,

for UltraHD/4K workows, especially with high frame rate

• 16GB RAM minimum, 32GB or more recommended, especially for UltraHD/4K

or High Frame Rate applications

KONA LH Capture, Display, Convert v15.5 7 www.aja.com

• A reasonably fast and powerful graphics card, with plenty of on-board

memory. Examples (may be specic to application version and/or host CPU)

include:

• NvidiaK5200

• Nvidia K4200

• Nvidia M6000

• Nvidia M5000

• Nvidia M4000

• AMD W7100

• AMD W8100

• Media storage with adequate bandwidth to sustain the capture and playback

of the material you expect to be working with.

NOTE: For large scale installations with shared storage, or for very high performance

requirements, AJA recommends consultation with an experienced a system

integrator. A consultant will be able to assist with many important variables.

Disk Storage Methods

To ensure performance and quality, the disk storage system used with

the workstation must be able to meet the demands of storing real-time

uncompressed media. At the very minimum, the disk storage system must be

able to provide and maintain a consistent transfer rate from the workstation to

disk (read/write). There are a variety of system configurations and peripherals that

can provide this level of performance.

For more on disk storage performance see "AJA System Test Application" on page

13.

KONA LHi Features

The KONA LHi card offers a large number of unique features for optimum quality,

ease of use, and support for a wide variety of workflows and environments.

KONA LHi provides flexible standard definition and high definition capture

and playback, a hardware-based converter for working in mixed SD/HD

environments—and it supports both analog and digital audio/video I/O—

including HDMI.

Video I/O

• 10-bit uncompressed QuickTime capture card

• 3G/HD/SD SDI I/O

• HDMI v1.3a w/Deep Color at 30 bits per pixel input/output

• 12-bit SD and HD Analog Component/Composite/S-Video I/O

Conversion

• Broadcast quality hardware-based 10-bit down-conversion

• Broadcast quality hardware based 10-bit up-conversion

• Broadcast quality hardware based 10-bit cross-conversion (1080 to 720 and

720 to 1080)

• Broadcast quality hardware based 10-bit SD aspect ratio conversion

(anamorphic to letterbox, etc.)

Audio I/O

• 2-channel analog balanced XLR audio I/O

KONA LH Capture, Display, Convert v15.5 8 www.aja.com

• 2-channel AES XLR audio I/O

• 8-channel SDI embedded audio I/O

Signal Timing

• HD/SD genlock on analog video inputs

• LTC Input (on Reference input)

Cabling

• Cables standard

• Optional KLHi-Box Breakout Box—provides rack mounting and exible

easy I/O (KLHi-Box cabling is included with the KLHi-Box).

KONA LHi Audio

KONA LHi supports 2-channel 24-bit 48kHz or 96kHz AES audio via XLR

connections, and 8 channel embedded 24 bit 48kHz audio over HDMI or the same

single SDI connection as the video. If you are using a digital deck—you’ll have the

proper connections to the deck.

For analog audio, KONA LHi provides two-channel balanced audio input and

output. If you purchase the optional KLHi-Box breakout box, you also get two-

channel unbalanced audio output (RCA jacks).

KONA LHi also features AES input sample rate conversion; this feature eliminates

the requirement for audio source synchronization. Sample rate converters auto-

lock to any AES or HDMI input, 32-96KHz, and then convert it to 24 bit 48KHz

audio, perfectly locked to internal KONA LHi video. Sample rate conversion is

done at very high quality (over 120db THD). (HDMI audio can be 20 to 24 bit and

will be saved as 24 bit samples.)

KONA LHe Plus Features

The KONA LHe Plus card offers a large number of unique features for

optimum quality, ease of use, and support for a wide variety of workflows and

environments. KONA LHe Plus provides flexible standard definition and high

definition capture and playback, a hardware down-converter for working in

mixed SD/HD environments—and it supports both analog and digital audio/

video I/O.

Video I/O

• 10-bit uncompressed SD/HD QuickTime capture card

• 12-bit HD Analog Component I/O

• 12-bit SD Analog Component/Composite/S-Video I/O

• One SDI or HD-SDI Input

• Two independent SDI/HD-SDI outputs

Conversion

• Broadcast quality hardware-based 10-bit down-conversion

Audio I/O

• 2-channel analog balanced XLR audio I/O

• 2-channel AES XLR audio I/O

• 8-channel SDI embedded audio I/O

KONA LH Capture, Display, Convert v15.5 9 www.aja.com

Signal Timing

• HD/SD genlock on analog video inputs

Cabling

• Cables standard

• Optional KL-Box Breakout Box—provides rack mounting and exible easy I/O

(KL-Box cabling is included with the KL-Box). When ordering, specify a KL-Box

for the KONA LHe Plus since it uses a unique cable.

KONA LHe Plus Audio

KONA LHe Plus supports two-channel 24-bit 48kHz AES audio via XLR

connections, and eight-channel embedded 24-bit 48kHz audio over the same

single SDI connection as the video. If you are using a digital deck—you’ll have the

proper connections to the deck.

For analog audio, KONA LHe Plus provides two-channel balanced audio input

and output. If you purchase the optional KL-Box breakout box, you also get two-

channel unbalanced audio output (RCA jacks).

KONA LHe Plus also features AES input sample rate conversion; this feature

eliminates the requirement for audio source synchronization. Sample rate

converters auto-lock to any AES input, 32-96KHz, and then convert it to 24 bit

48KHz audio, perfectly locked to internal KONA LHe Plus video. Sample rate

conversion is done at very high quality (over 120db THD).

Cable Connections

KONA offers unsurpassed cable connectivity for a video/audio capture card.

Connections are made via the breakout cable (included with the card) and

connectors mounted on the KONA Card endplate.

KONA LHi and LHe Plus Connectors

The breakout cable used for both KONA LHi and LHe Plus models provides:

• Reference Input (BNC connector)

• Component/Composite/S Video Input (3x BNC)

• Component/Composite/S Video Output (3x BNC)

• AES In (2x XLR)

• AES Out (2x XLR)

• Balanced Audio In (2x XLR)

• Balanced Audio Out (2x XLR)

• RS-422 Machine Control (9-pin)

KONA LH Capture, Display, Convert v15.5 10 www.aja.com

Figure 1. Breakout Cable for LHe Plus and LHi Models

RS422 Machine Control

to VTR (9-pin)

Analog Audio Channel 1 Input

Analog Audio Channel 2 Input

Analog Audio Channel 1 Output

Analog Audio Channel 2 Output

Digital AES Input Channels 1 & 2

Digital AES Output Channels 1 & 2

Multiple-pin

connector

to KONA LH

Y/CVBS In BNC

Pb/Y In BNC

Pr/C In BNC

Y/G/CVBS Out BNC

Pb/B/Y Out BNC

Pr/R/C Out BNC

green

blue

red

green

blue

red

6 BNCs (Analog Connections): Can be

Congured for Component, Composite, or Y/C

Reference Input or LTC Input BNC

Balanced Audio

Analog Video

KONA LHi Endplate

Connectors on the KONA LHi card endplate additionally provide:

• Standard-denition or High-denition SDI input (1 BNC) and output (1 BNC)

• HDMI input and output (2x HDMI mini-connectors)

KONA LHe Plus Endplate

The KONA LHe Plus endplate provides one BNC for SDI input and two

independent SDI output BNCs.

Using Breakout Boxes

The KONA product line offers two optional 19” 1RU rack-mountable breakout

boxes that attach to the KONA card via cables that connect to the back of the

breakout box. These cables are supplied with the breakout box. The breakout

boxes offer the same inputs and outputs as the standard breakout cables and

more. Breakout boxes can be easily rack mounted or placed on top of a broadcast

monitor or editing desk.

KLHi-Box for KONA LHi

The KLHi-Box offers the same connections as the KL-Box except a single

connector is provided for the following: SDI input, SDI output, HDMI v1.3a input,

and HDMI v1.3a output.

KONA LH Capture, Display, Convert v15.5 11 www.aja.com

NOTE: The HDMI connectors on the breakout box are full-size, not mini as on the LHi

endplate

Figure 2. KLHi-Box Model Breakout Box

.

RS422

Machine

Control

External

Ref. or LTC

(loop)

Analog

Audio

Output

Balanced Audio In

Channels 1 & 2

Balanced Audio Out

Channels 1 & 2

Composite/

Component

Video In

Composite/

Component

Video Out

AES/EBU Audio

In and Out

SDI

In

HDMI v1.3a

Out

HDMI v1.3a

In

SDI

Out

KL-Box for KONA LHe Plus

The KL-Box is connected via one 60-pin to 60-pin, and one 3-BNC to 3-BNC cable.

When you purchase the KL-Box, you get two-channel unbalanced audio output

(2 RCA Jacks) not available with the standard cable. When ordering a KL-Box,

specify the KONA card model you’ll be using the KL box with to ensure you get

the proper cable set.

Figure 3. KL-Box Model Breakout Box

RS422

Machine

Control

External

Reference

(loop)

Analog Audio

Output

Balanced Audio In

Channels 1 & 2

Balanced Audio Out

Channels 1 & 2

Composite/

Component

Video In

Composite/

Component

Video Out

AES/EBU Audio

In and Out

Serial

Digital

In

Out

Serial

Digital

Detailed Connector Descriptions

LHe Plus/LHi Connectors

Connectors on the standard cable set are labeled by their function for easy

installation and maintenance. Connectors on the optional KL-Box are similarly

labeled

SDI Input and Outputs

BNC connectors are provided on the KONA LHe and LHi card endplates for

one SD-SDI or HD-SDI input. The LHe Plus has two, and LHi has one SDI output

(format independent of the input). The SDI input and outputs support video and

embedded 24-bit digital audio. Use SDI wherever possible for the best quality 10-

KONA LH Capture, Display, Convert v15.5 12 www.aja.com

bit uncompressed video input, capture and output. If peripheral equipment has

a variety of inputs/outputs, look to see if it has SDI I/O, and use it where possible.

Most high-end professional broadcast equipment supports SDI (VTRs, cameras,

media storage servers, etc.).

2-Channel Digital AES/EBU Audio Inputs And Outputs

One female XLR connector is provided for the channel 1 and 2 inputs, while

a male XLR connector carries channel 1 and 2 outputs. AES/EBU signals are

handled internally as 24-bit digital. The optional KL-Box also provides XLR audio

connections on the front panel.

NOTE: AES XLR connections are digital and cannot be used with analog equipment

having XLR connectors.

Analog 2-Channel Balanced Audio

Two sets of analog XLR connectors, one for each channel, support balanced audio

connections. Male XLRs are provided for outputs and female XLRs are provided

for inputs. Balanced audio (differential) connections provide better analog

audio quality over longer cable runs. Most professional quality VTRs and audio

equipment have XLR style connectors for analog audio. Analog audio signals are

converted internally to 24-bit digital.

Unbalanced Audio on KL-Box

On the KL-Box are two analog output connectors, one for each channel. These

connectors are RCA-style phono jacks.

RS-422 Machine Control

A female DE-9 connector on the LHi/LHe Plus breakout cable provides connection

for VTRs, camcorders, disk media servers, and other devices using RS-422 SMPTE

(Sony) protocol. This RS-422 connector is also present on the optional KL-Box

(connector pinout is Sony 9-pin protocol).

LHi Only Connectors

HDMI Input and Output

Two HDMI mini-connectors on the LHi endplate (full-size HDMI connectors on

the KLHi-Box) provide for input and output of HDMI compatible video (version

1.1) and multi-channel embedded audio (8 channels). HDCP is not supported on

either input or output. The LHi’s HDMI output does not have HDCP, and input

sources having HDCP are not supported. The HDMI input is designed to support

long cable runs—up to 100 ft. when using 22 or 24AWG HDMI cable, or up to 50

ft. using 28 or 30AWG HDMI cable. The HDMI output supports standard HDMI

cables only.

KONA LH Capture, Display, Convert v15.5 13 www.aja.com

Chapter 2 – Installation

Installation Overview

The installation and set up of a KONA card is simple, and may vary slightly

depending on your system.

For the most up-to-date Mac system requirements for KONA, see the following

AJA website:

https://www.aja.com/en/support/kona-system-configuration/

For the most up-to-date Windows system requirements for KONA, see the

following AJA website:

https://www.aja.com/en/support/kona-pc-system-configuration/

AJA System Test Application

AJA System Test is a utility for measuring system performance with AJA KONA

Video Capture cards. It is installed with the KONA Driver. The application includes:

• System Disk Test

• AJA Device Test

• Disk + Device Test

• System Report

The application tests Read and Write, Capture and Playback speeds tests in both

Megabytes per second and Frames per second. The disk speed tests differ from

standard disk I/O performance applications in that they specifically test the

system under conditions typically encountered with video capture, playback, and

editing.

We suggest the best test is to fill your storage disk to 80% and then test capture at

the highest data rate you will use.

Unpacking

Shipping Box Contents

Your KONA shipment includes:

• KONA PCI-Express card

• KONA I/O cables.

KONA LH Capture, Display, Convert v15.5 14 www.aja.com

Installing the KONA Card

Figure 4. KONA Card (model LHe Plus)

The KONA card can be installed into a PC chassis, legacy Mac Pro chassis with PCIe

slots, or into a Thunderbolt PCIe external chassis.

1. Turn o power to the host chassis.

2. Touch the outside of the chassis to discharge any body static.

3. Remove the power cable from the back of the chassis.

4. Open the chassis.

5. Locate a recommended PCIe slot (see the AJA website for slot selection

instructions).

6. Remove the backplate and screw from the PCIe slot.

7. Touch the chassis to discharge any body static.

8. Remove the KONA card from its anti-static bag.

9. Carefully insert the card by rocking it slowly into the slot. Ensure the card

aligns properly with the slot opening and is fully seated.

10. Replace the screw to secure the card.

11. Close the chassis.

12. Power up the chassis.

NOTE: Always put a RAID controller and KONA on separate PCIe busses. This improves

performance by reducing bus contention.

KONA LH Capture, Display, Convert v15.5 15 www.aja.com

Cabling the System

KONA LHi Cable Connections

Figure 5. Typical KONA LHi System Shown with Optional KLHi-Box

Digital VTR with SDI Inputs

RS422

Machine

Control

SDI Video

with Embedded

Audio In/Out

Audio Monitor

AES/EBU Audio In/Out

to Monitor System

Reference Monitors

Analog Audio

Inputs/Outputs

(Balanced)

POWER

CMPTR

External Storage

Computer Monitor

•

Optional

Genlock

Reference

Video Monitor

Component

Video

Apple Mac Pro

with OSX

or PC with

Windows 7

AJA KONA LHi Card

Connect to

KLHi-Box Using

Cables and Instructions

Supplied With it

Installed

Inside Mac

or PC

Connect HDMI In/Out

Adapter Cables

Between KONA LHi

Card and KLHi-Box

Also see Figure 1 on page 10 for KONA LH cable connector identification.

Typical System

Figure 5 on page 15 shows typical system interconnections for a system

with digital A/V sources. Your system may differ depending on VTRs, audio

monitoring, and video monitoring.

1. If desired, connect your house reference sync to the KONA LHi Ref Loop

connector (BNC). The second KONA LHi Ref Loop connector on the KLHi-

Box (if used) can be connected to the VTR or terminated with a 75-ohm

terminator. If instead using LTC timecode input, connect to the Ref Loop

input.

2. Connect an HDMI Video Monitor to the KONA LHi HDMI Out connector. Or

instead, use the Component Analog Video Out BNC connectors to go to an

analog monitor.

3. Connect a 9-pin DE9 machine control cable between your VTR’s RS422

control port and the breakout cable’s RS-422 machine control connector.

4. Connect two SDI cables between KONA LHi (BNCs are on the card endplate)

and your digital VTR (Digital Betacam etc.), one from KONA LHi SDI In to the

KONA LH Capture, Display, Convert v15.5 16 www.aja.com

VTR SDI Out, and one from KONA LHi SDI Out to the VTR SDI In. The KONA

LHi SDI connections have embedded audio so the VTR must be congured

accordingly.

5. If you have an AES/EBU-ready audio monitoring system, then connect the

two channels of AES/EBU output from KONA LHi’s XLR connectors (channels

1 and 2) to the monitoring system AES/EBU inputs. If you instead have an

analog audio monitoring system, you can use either the XLR balanced audio

connectors or the two RCA-style unbalanced stereo output jacks on the

Optional KLHi-Box for output.

KONA LHe Plus Cable Connections

Figure 6. Typical LHe Plus System Shown with Optional KL-Box

Digital VTR with SDI Inputs

RS422

Machine

Control

SDI Video

with Embedded

Audio In/Out

External Reference

Audio System

AES/EBU Audio In/Out

to Monitor System

Reference Monitors

Analog Audio

Inputs/Outputs

(Balanced)

RAID storage

Computer Monitor

Optional

Genlock

Reference

Video Monitor

Component

Video

Workstation

AJA KONA LHe Plus Card

Connect to

KL-Box Using

Cables and Instructions

supplied with it

Installed

inside the

computer

HBA for connection

of external storage

See Figure 1 on page 10 for KONA LH cable connector identification.

Typical System

Figure 6 on page 16 shows typical system interconnections for KONA LHe Plus

with digital A/V sources. Your system may differ depending on VTRs, audio

monitoring, and video monitoring.

1. If desired, connect your house reference sync to the KONA LHe Plus Ref

Loop connector (BNC). The second KONA Ref Loop connector on the KL-

Box (if used) can be connected to the VTR or terminated with a 75-ohm

terminator.

2. Connect a Video Monitor to the KONA LHe Plus Component Analog Video

Out BNC connectors (preferred), or instead connect to a composite monitor.

KONA LH Capture, Display, Convert v15.5 17 www.aja.com

3. Connect a 9-pin DE9 machine control cable between your VTR’s RS422

control port and the breakout cable’s RS-422 machine control connector.

4. Connect two SDI cables between the KONA card (BNCs are on the card

endplate) and your digital VTR (Digital Betacam etc.), one from KONA card’s

SDI In to the VTR SDI Out, and one from card’s SDI Out (1 or 2) to the VTR SDI

In. The KONA LHe Plus SDI connections have embedded audio so the VTR

must be congured accordingly.

5. If you have an AES/EBU-ready audio monitoring system, connect the two

channels of AES/EBU output from KONA’s XLR connectors (channels 1 and

2) to the monitoring system AES/EBU inputs. If, instead, you have an analog

audio monitoring system, you can use either the XLR balanced audio

connectors or the two RCA-style unbalanced stereo output jacks on the

Optional KL-Box for output.

Installing KONA LH Software

NOTE: Always uninstall previous versions of KONA software before updating your

software.

Download

Go to the AJA website and download the latest KONA LH driver software

containing the AJA Control Panel application:

https://www.aja.com/en/support/downloads/

System software updates may occasionally become available to AJA KONA LH

owners on our website (www.aja.com). We recommend checking occasionally for

both software updates and additional product information.

NOTE: If your computer has previously had another video capture or multimedia device

installed, ensure you uninstall any related software before installing KONA LH

This will prevent any hardware or software conflicts.

Software Package Installation and Re-installation

Before installing the KONA LH software package, ensure that your capture/editing

application is installed as detailed in its user documentation. You cannot use

KONA LH with a third-party application until the application has been installed

and run at least once on your workstation. Next, install the AJA software package.

If you add KONA LH supported applications at a later date and have not

previously installed the appropriate drivers, you must run the install program

again selecting the appropriate application support software to be installed.

Firmware Update Procedure

After the AJA Software Package has been installed on a computer with your AJA

hardware installed, the firmware on that AJA device can be updated if a newer

version of firmware is included with that software package.

1. Open the AJA Control Panel application.

2. If more than one AJA device is connected, choose the device you want to

update by selecting its name from the drop-down menu at the top of the

screen.

3. Go to the Control Panel Firmware Screen.

KONA LH Capture, Display, Convert v15.5 18 www.aja.com

4. Select the rmware version (if multiple versions exist) in the Desired

dropdown.

5. Click on Install. Messages appear and when nished, rmware update

completed messages are shown (Figure 7).

Figure 7. Update Completed Messages

6. Click Shutdown to power down the computer.

7. Restart the computer.

8. Open AJA Control Panel. The AJA hardware with the updated rmware

should be recognized by the Control Panel application.

KONA LH Capture, Display, Convert v15.5 19 www.aja.com

Chapter 3 – Operation

Using KONA with Professional Video /Audio Software

After you install the AJA software package on your computer, you’re ready to

begin capturing and playing back video and audio using your choice of third-

party software. You can go here for AJA software and documentation:

https://www.aja.com/en/support/downloads/

For further support information and downloads for third-party software and

DirectShow for Developers, go to:

https://www.aja.com/en/category/edit/compatibility

Capture Formats

When capturing, you can record data in the following file formats:

• BMP

• DPX

• MOV (QuickTime)

NOTE: Support by KONA of QuickTime for Windows has been discontinued.

• MXF

• TGA

NOTE: Other file types can be captured using third-party capture applications such as

Sienna, Softron, Tools on Air, Drastic, or Quadrus.

AJA Control Panel Overview

The AJA Control Panel is a software application that provides a simple visual

showing how the KONA hardware is currently configured and allows you to make

changes. You can change signal input and output parameters and define the

video processing that will be performed.

The AJA software installer automatically installs the Control Panel application on

your computer.

AJA Control Panel Operating Modes

AJA Control Panel has two fundamental operating modes.

KONA LH Capture, Display, Convert v15.5 20 www.aja.com

Playback Mode - Used for playing back video files from the computer, usually

with a non-linear editing application (NLE) or AJA Control Room, through the

KONA card to that card’s video/audio outputs for viewing and/or external

recording.

Capture Mode - Used for capturing video/audio signals that are coming into

the KONA card from an external source to create video files on the computer

using AJA Control Room or an NLE, or just for display on the KONA outputs.

This mode is also used for stand-alone video display or conversion when

Control Panel is being used without an external controlling application.

The current KONA operating mode is reported on the Control Panel UI screen,

below the block diagram.

AJA Control Panel User Interface

The AJA Control Panel user interface includes a visual block diagram of the unit’s

current configuration. The current status, input and output settings, and many

other details are depicted in the color-coded block diagram. Below this block

diagram are various controls for changing operating parameters, which will vary

depending on which function screen has been selected.

The left side of the AJA Control Panel provides a navigation list of available

function screens. Clicking on a link (or alternatively, a related element in the block

diagram) displays a function screen corresponding to that topic.

Figure 8. AJA Control Panel, Block Diagram and Controls

Inputs

Framebuer

Format

(Primary)

Outputs

Currently

Selected

Function

Screen

Parameter

Controls

Block Diagram Area

The top block diagram area of the Control Panel screen is a visual representation

of the processing, if any, that’s currently occurring, including inputs/outputs,

reference source, and system status. Lines between inputs, the framebuffer, and

outputs, show a video path. Where there are no lines, there is no connection; this

can be because an input or output isn’t selected in the Input Select menu. The

lines will also show whether the outputs are video or video + key.

You can click any of the function screen selection links in the left column to view

its current settings or click on an icon to call up its related settings screen. You can

also right-click or Control-click to see context-sensitive information and choices.

La pagina si sta caricando...

AJA KONA LHi Manuale utente

Questo manuale è adatto anche per

AJA KONA LHi Manuale utente

in altre lingue

Documenti correlati

Altri documenti