Agria 5300 Manuale del proprietario

Marca: Agria

Modello: 5300

Categoria: Tosa erba

Tipo: Manuale del proprietario

Before commissioning the machine, read operating

instructions and observe warnings and safety instructions!

Operating Instructions No. 998 747-A 12.11

4238

Grassland Mower

5300

- Honda Engine

- Robin Engine

Operating Instructions

Translation of the original operating instructions

2 agria Grassland Mower 5300

Symbols, Name Plate

Please complete:

Machine Type No.:......................

Identification No.:

...................................................

Engine Type:...............................

Engine No.:.................................

Date of Purchase: ......................

For name plate, refer to p3/fig. A/7.

For Engine type and number, refer to

p3/fig. B/6.

Please state these data when order-

ing spare parts to avoid wrong deliv-

eries.

Only use original agria spare parts!

Specifications, figures and dimen-

sions stated in these instructions are

not binding. No claims can be derived

from them. We reserve the right for

improvements without changing these

instructions.

This delivery comprises:

Operating instructions

Engine operating instructions

Grassland mower –basic machine

Handlebar with knob screw

1 pair of drive-wheels *

Cutter bar *

Tool kit

* = depending on machine version

Symbols

Warning – Danger

Important information

Choke

Fuel

Oil

Engine Start

Motordrehzahl

Engine Stop

Air filter

Visual check

Clutch

Mowing drive

Wheel drive

Forward

Reverse

Slow

Open (unlocked)

Closed (locked)

see engine operating

instructions

- Serviceç

= contact

your agria workshop

Please observe that only those activities of the engine are described here

which are required for operating the Grassland Mower. All other information on

the engine may be taken from the enclosed engine operating instructions!

agria Grassland Mower 5300 3

Designation of Parts

13 7 8

12 11

Honda Engine

Robin Engine

4 agria Grassland Mower 5300

Designation of Parts

Figure A

1 Cutter bar

2 Running bases

3 Knife driver

4 Lubrication nipple for cutter bar carrier pin

5 Lubrication nipple for crank roll

6 Mowing drive hood

7 Name plate/Machine identification no.

8 Engine

10 Handlebar

11 Pulley and belt guard (V-belt clutch)

12 Interlocking bolt for cutter bar

13 Lubrication nipple for interlocking bolt

14 Transmission oil filler plug/control screw

15 Cap of transmission housing/Transmission oil drain opening

16 Drive-wheel

17 Detent spring for drive-wheel

Figure B

1 Air filter

2 Carburetor

3 Fuel tank cap

4 Fuel tank

5 Choke lever

6 Engine type no.

7 Starter handle

8 Cooling-air screen

9 Exhaust with exhaust guard

10 Spark plug, spark plug connector

11 Engine oil filler plug – control opening

12 Engine oil drain screw

13 Fuel tap

agria Grassland Mower 5300 5

Index

Amount of Delivery ..........................2

Symbols, Name Plate......................2

Designation of Parts ........ 3, 50

Recommendations

Lubricants, Anti-Corrosive Agents ..6

Fuel ..................................................6

Maintenance and Repair .................6

Instructions for

Unpacking and Assembly ..... 7

1. Safety Instructions...... 8 - 13

Due Use...........................................8

2. Specifications

Dimensions ....................................14

Grassland Mower...........................14

Mowing Drive .................................14

Noise Level ....................................14

Vibration Acceleration Value..........14

Engine...................................... 15/16

Operation on Slopes................ 15/16

3. Devices and

Operating Elements

Engine............................................17

Safety Circuit .................................18

Travelling Drive ..............................19

Clutch.............................................19

Mowing Drive .................................20

Steering Handle .............................21

Drive-Wheels .................................21

Cutter Bar ......................................25

4. Commissioning and

Operation

Commissioning the Machine .........27

Starting the Engine........................28

Shutting off the Engine ..................29

Mowing...........................................30

Danger Zone..................................31

Mowing on Slopes .........................31

5. Maintenance

Engine............................................32

Cooling System .............................33

Exhaust..........................................33

Speed Actuating Devices ..............33

Machine .........................................34

Drive-Wheels .................................34

Mowing Attachment .......................35

Universal-S Cutter Bar ..................36

Municipal Cutter Bar ......................37

Re-Grinding Mowing Knives ..........38

Safety Circuit .................................39

Adjustments on Hand Levers ........39

Adjusting V-Belt Tension ................40

General Maintenance ....................41

Cleaning.........................................41

Storage .................................. 42 - 43

6. Troubleshooting......... 44 - 45

Electrical Wiring,

Lubrication Chart ................. 46

Varnishes, Wear Parts.......... 47

Inspection and

Maintenance Chart............... 48

Conformity Declaration ....... 51

Note fold-out pages!

Fig. A and B ............................ 3

Fig. C and D .......................... 50

6 agria Grassland Mower 5300

Recommendations

Do not add oil to petrol.

If, for environmental reasons, you use

unleaded petrol, make sure the fuel is

drained completely when shutting down

the engine for more than 30 days. This

is to prevent resin residue from depos-

iting in the carburetor, fuel filter, and

tank. Or add a fuel stabilizer to the fuel.

For further instructions refer to “Engine

Preservation”.

Maintenance and Repair:

The trained mechanics of your agria

workshop expertly carry out any main-

tenance and repair work.

You should only carry out major main-

tenance work and repairs on your own,

if you have the proper tools and knowl-

edge of machines and internal combus-

tion engines.

Do not hammer against the flywheel with

a hard object or metal tools as it might

crack and shatter in operation, causing

injuries and damage. Only use suitable

tools to pull off the flywheel.

Lubricants and

Anti-Corrosive Agents:

Use the lubricants specified for engine

and gearbox (see “Specifications”).

We recommend using Bio-lubricating

oil or Bio-lubricating grease for “open”

lubrication points or nipples (as speci-

fied in the operating instructions).

We recommend using Bio-slushing oil

to preserve machines and attachments

(do not apply on painted covers). You

can brush or spray the oil.

Anti-corrosive agents are environmen-

tally friendly and degrade fast.

Using ecologically safe Bio-lubricants

and Bio-anti-corrosives, you contribute

to environmental protection and to the

wellbeing of humans, animals and

plants.

Fuel

This engine runs smoothly on commer-

cial unleaded regular and supergrade

petrol (including E10).

agria Grassland Mower 5300 7

Instructions for Unpacking and Assembly

Open the box top.

Cut the two rear corners

open and fold down the box

sides.

 Fold the steering handle

upwards.

Remove the hex head

bolt (3) and hex nut (4).

Pivot the steering handle

(2) upwards, insert the hex

head bolt (3) into the appro-

priate holes, attach the hex

nut (4) and tighten it.

Move the wheel drive

engagement lever (6) to po-

sition 0 and lock it to disen-

gage the wheel drive. This

is to push the undriven ma-

chine.

Pull the machine rear-

wards to remove it from the

box.

Attach the cutter bar (5),

Carry out the start-up

procedure











8 agria Grassland Mower 5300

1. Safety Instructions

Before starting the engine, read the op-

erating instructions and note:

Warning

This symbol marks all paragraphs which

affect your safety. Pass all safety instruc-

tions to other users and operators.

Due Use

The grassland mower is constructed

solely for the cutting of grass and simi-

lar plants as well as thin non-wooded

scrub in land & forest management,

green spaces, and other such areas and

may also be used as a snow-clearing

machine after it has been fitted with a

suitable rake blade (due use).

Any other type of operation is consid-

ered undue. The manufacturer is not li-

able for any damages resulting from

undue use, for which the risk lies with

the user alone.

When the grassland mower is used on

public roads, the local national road traf-

fic rules must be observed, e.g. reflec-

tors, lights.

The grassland mower is not intended for

use with a trailer on public roads or as

as a tract

ive machine.

Due use includes compliance with

manufacturer’s instructions on opera-

tion, maintenance and repair.

Any unauthorized changes to the mower

render manufacturer liability null and

void.

General Instructions on

Safety and Accident

Prevention

Basic Rule:

The standard accident prevention regu-

lations must be adhered to, as well as

all other generally accepted rules gov-

erning operational safety, occupational

health and road traffic regulations.

For drives on public roads, the national

traffic code applies.

Accordingly, check the grassland mower

for road and operational safety each time

you take up operation.

Only persons familiar with the mower

and instructed on the hazards of opera-

tion are allowed to use, maintain and

repair the mower.

Teenagers of 16 years or younger may

not operate the grassland mower!

Only work in good light and visibility.

Operator’s clothes should fit tight. Avoid

wearing loose fitting clothes. Wear solid

shoes.

Note the warning and instruction signs

on the mower for safe operation. Com-

pliance is for your own safety.

When transporting the mower on vehi-

cles or trailers outside the area to be

mowed, ensure that the engine is turned

off.

Careful with rotating tools – keep at a

safe distance!

agria Grassland Mower 5300 9

1. Safety Instructions

Beware of coasting tools. Before you

start any maintenance or repair on them,

wait until tools have come to a complete

stop.

Foreign powered parts shear and crush!

Riding on the attachment during opera-

tion is not permitted.

Implements and their weight affect the

driving, steering, braking, and tip-over

characteristics of the mower. Therefore,

ensure steering and braking functions

are sufficient. Match operating speed to

conditions.

Do not change settings of governor. High

engine speed increases risk of acci-

dents.

Working Area and Danger

Zone

The user is liable to third parties work-

ing within the mower’s working range.

Staying in danger zone is not permit-

ted.

Check the immediate surroundings of

the mower before you start it. Watch out

for children and animals.

Before you start work, clear the area

from any foreign object. During opera-

tion, always watch out for further objects

and remove them in time.

For operation in enclosed areas, ensure

that a safety distance is kept to enclo-

sures to prevent damage to tools.

Operation and Safety

Devices

Before you start the engine

Become familiar with the devices and

operating elements and their functions.

Above all, learn how to turn the engine

off quickly and safely in an emergency.

Ensure that all protective devices are

mounted and positioned to provide pro-

tection.

With no implement mounted, make sure

PTO-shaft is covered with the protec-

tive cap.

Starting the engine

Do not start engine in closed rooms. The

carbon monoxide contained in the ex-

haust fume is extremely toxic when in-

haled.

Before you start the engine set all oper-

ating elements to neutral or idling posi-

tion.

For starting the engine, do not step in

front of the mower and the implement.

Operation

Never leave the operator’s position at the

steering handle while mower is at work.

Never adjust the operating handles dur-

ing work – danger!

10 agria Grassland Mower 5300

1. Safety Instructions

During operation the operator must keep

at a distance as defined by the steering

handle, especially when turning the

machine.

Riding on the implement during opera-

tion or in transport is not permitted.

If clogging occurs in the implement, turn

off the engine and clean the implement

with an appropriate tool.

In case of damage to the grassland

mower or to the implement, immediately

turn off the engine and have it repaired.

If steering causes problems, immedi-

ately bring the mower to a halt and turn

it off. Have the malfunction removed

without delay.

To prevent the mower from sliding on

slopes, make sure it is secured by an-

other person using a bar or a rope. This

person must be located at a higher po-

sition than the vehicle and at a safe dis-

tance from the attachment at work.

If possible, always work horizontally on

the slope.

End of Operation

Never leave the mower unattended with

the engine running.

Before you leave the grassland mower,

turn off the engine.

Secure grassland mower against unau-

thorized use. If mower is equipped with

ignition key, remove the key. For all other

versions, remove spark plug connector.

Implements

Only mount implements with the engine

and PTO switched off.

Always use appropriate tools and wear

gloves when changing implements and

parts thereof.

For mounting and dismounting imple-

ments bring support leg into proper po-

sition and ensure stability.

Secure mower and implements against

rolling off (parking brake, wheel chocks).

Beware of injuries while coupling imple-

ments.

Mount implements as specified and only

couple at specified points.

Secure mower and implement against

unauthorized use and rolling off when

you leave the machine. If necessary, in-

stall transport or security devices and

secure.

Mowing Attachment

Handle with care! Sharp blades of the

cutter bar may cause injuries! Remove

knife guards only for mowing and refit

immediately after work has finished.

For transport and storage always mount

the knife guards. Secure finger bars

additionally with tension springs.

Do not transport the dismounted cutter

bar without knife guards.

agria Grassland Mower 5300 11

1. Safety Instructions

Before mounting and dismounting the

cutter bar, make sure all blades are pro-

tected by the knife guard.

To exchange the mowing knife and to

mount/dismount the knife driver, make

sure that you turn screws away from

cutting edges.

For grinding the mowing knives, always

wear safety goggles and gloves.

Weights

Always fit weights onto appropriate

weight mounting devices.

Snow Clearing

Ensure snow dozer is mounted cor-

rectly! Wear slip-proof shoes.

When swivelling the snow dozer watch

out for crush and shear points. Adjust

working speed to conditions. Operator

may be injured when the mache comes

in contact with solid objects.

Maintenance

Never carry out any maintenance or

cleaning with the engine running.

Before you work on the engine, always

remove spark plug connector (petrol

engine only).

Check regularly and, if necessary, re-

place all protecting devices and tools

subject to wear and tear.

Replace damaged cutting tools.

Always wear safety gloves and use

proper tools when exchanging cutting

tools.

Do not carry out repairs like welding,

grinding, drilling, etc. on structural and

safety-relevant parts (e.g. coupling de-

vices)!

Keep mower and implement clean to

avoid risk of fire.

Check nuts and screws regularly for tight

fit and re-tighten, if necessary.

After maintenance and cleaning, ensure

that you re-install all safety and protec-

tive devices and adjust them properly.

Only use original agria spare parts. All

other commercial spare parts must cor-

respond to quality and technical require-

ments specified by agria.

Storage

It is not allowed to store the mower in

rooms with open heating.

Never park the mower in closed rooms

with fuel left in tank. Fuel vapours are

hazardous.

12 agria Grassland Mower 5300

1. Safety Instructions

Engine, Fuel, and Oil

Never let the engine run in closed rooms.

Extreme danger of intoxication! For the

same reason, also replace damaged

exhaust parts immediately.

Caution with hot engine parts!

The exhaust and other engine parts

become very hot, if the engine runs and

immediately after turning off. Hold for

sufficient distance from hot surfaces and

keep children away from the running

engine.

Be careful when dealing with fuel. Great

danger of fire! Never refill fuel close to

open fire, inflammable sparks or hot

engine parts. Do not refill fuel in closed

rooms. Do not smoke when refilling!

Refill only with the engine switched off

and cooled down.

Do not spill any fuel, use a proper filling

device.

In case of fuel spillage, pull the grass-

land mower away from the spillage be-

fore you start the engine.

Make sure fuel is of specified quality.

Store fuel in approved cans only.

For safety reasons the petrol tank and

fuel cap should be replaced regularly.

Store anti-corrosive agents and stabi-

lizing liquids out of reach of children. If

sickness and vomiting occur, see a doc-

tor. If fuel has contacted eyes, rinse

them thoroughly, avoid inhaling of va-

pours.

Read and observe enclosed instruc-

tions.

Before you dispose of opened and

seemingly empty pressurised tins (e.g.

of assist-starting liquids) make sure they

are completely empty. Empty them in

ventilated places safe from spark for-

mation or flames. If necessary, dispose

of tins in hazardous waste deposits.

Be careful when draining hot oil, dan-

ger of burns.

Make sure oil is of specified quality. Stor-

age is in approved cans only.

Dispose of oil, greases, and filters

seperately and properly.

Tyres and

Tyre Air Pressure

When working on tyres, make sure

grassland mower is parked properly and

secured against rolling off.

Any repairs are to be carried out by

trained mechanics only and with the

appropriate tools.

Regularly check tyre air pressure. Ex-

cessive pressure may cause bursts.

Use appropriate tyre air pressure when

mounting weights or implements.

Re-tighten attachment bolts of drive-

wheels or check tightness when doing

maintenance work.

Electrical System and

Battery

Persons having a pacemaker must not

touch live parts of ignition system when

the engine is running.

agria Grassland Mower 5300 13

1. Safety Instructions

Explanation of

Warning Signs

Before any cleaning, maintenance, and

repair work switch off the engine and

pull spark plug connector.

With engine running, keep at a safe dis-

tance from cutting tools.

Signs

When working with the ma-

chine, wear individual protec-

tive ear plugs.

Wear protective gloves.

Wear solid shoes.

14 agria Grassland Mower 5300

2. Specifications

Clutch:

V-belt clutch with idler pulleys between

engine and transmission

Friction clutch for reverse

Only use original agria V-belts! (see

list of wear parts p47)

Transmission:...................Worm gear

with engageable wheel-drive

Transmission oil SAE 90-API GL5

Filling quantity.................. approx. 0.6 l

Travelling speed:

forward .................................. 3.0 km/h

reverse .................................. 2.3 km/h

Mowing drive:

Central crank drive,

Shaft speed............................920 rpm

Stroke, dyn................... approx 56 mm

Steering handle:

Vibration dampened,

height-adjustable,

side-adjustable without tools

Weight:

without cutter bar ...................... 70 kg

with cutter bar 105 cm ............... 84 kg

with cutter bar 122 cm ............ 89.5 kg

Noise level:

In accordance with EN 12733 and EN 1553:

Noise level at operator’s ear ..............

.................................. L

= 83.3 dB (A)

Sound level: .............L

= 103.3 dB(A)

Vibration acceleration value:

In accordance with EN 12733 and EN 1033:

on handlebar grip:......... a

= 9.6 m/s

Machine Dimensions:

a ........................................ 470 mm

b ........................................ 630 mm

e ........................................ 280 mm

h .............................. 860–1080 mm

l........................................ 1550 mm

m ........................... 910 or 1050 mm

(depending on cutter bar version)

s......................................... 375 mm

s..................... twin-wheels 762 mm

A ........................................ 525 mm

A .................... twin-wheels 857 mm

Grassland Mower

Tyres:.....................3.50 - 6 (field tyre)

Tyre air pressure:................... 0.8 bar

agria Grassland Mower 5300 15

2. Specifications

Engine

Version: ....................... Fan-air cooled

1-cylinder, 4-stroke petrol ohv engine

Manufacturer: ..........................Honda

Mower type: 5300 441 5300 531

Engine type: GX 160 GX 200

K1 QPU QHQ4

Bore: 65 mm 68 mm

Stroke: 45 mm 54 mm

Cubic capacity: 163 ccm 196 ccm

Compression

ratio: 8.5 : 1 8.5 : 1

Output:

at 3,600 rpm 4.0 kW 4.8 kW

Max. torque:

at 2,500 rpm 10.8 Nm 13.2 Nm

Spark plug: ................ NGK BPR6 ES

Spark plug gap: ............... 0.7–0.8 mm

Ignition system:

Contactless solenoid ignition, ignition

point is pre-set, radio remote

screened according to VDE 0879

Valve lash (engine cold):

Intake: ............... 0.15 mm ±- 0.02 mm

Outlet: ............... 0.20 mm ± 0.02 mm

Starter:

Soft-pull recoil starter with mechanical

decompression facility

Fuel tank capacity: .................... 3.6 l

Fuel: ........................... unleaded petrol,

octane number at least 91 RON

(also E10)

refer to fuel recommendations

Air filter: ..................Dry element filter

with foamed preliminary filter

Carburetor: .......... Throttle valve type

Mixture control screw:

opened approx. 2 1/8 turns in base

setting

Rated speed: ........ 2,900...3,000 rpm

Top no-load speed: ...........3,000 rpm

Idling speed:...........1,250–1,600 rpm

Engine oil:

Filling quantity..................approx. 0.6 l

Multi-grade oil SAE 10 W-40

SG, SF or higher quality grade

Operability on Slopes:

max .................................... 30° (58 %)

(with oil level at “max“”= upper level

mark)

16 agria Grassland Mower 5300

2. Specifications

Engine

Version: ....................... Fan-air cooled

1-cylinder, 4-stroke petrol ohc engine

Manufacturer: ...........................Robin

Mower type: 5300 611

Engine type: EX21

Bore: 67 mm

Stroke: 60 mm

Cubic capacity: 211 ccm

Output:

at 3,600 rpm 4.8 kW

Max. torque:

at 2,500 rpm 13.9 Nm

Spark plug: .................. NGK BR6 HS

Spark plug gap: ............... 0.6–0.7 mm

Ignition system:

Contactless solenoid ignition, ignition

point is pre-set, radio remote

screened according to VDE 0879

Valve lash (engine cold):

Intake: ............... 0.15 mm ±- 0.02 mm

Outlet: ............... 0.20 mm ± 0.02 mm

Starter:

Soft-pull recoil starter with mechanical

decompression facility

Fuel tank capacity: .................... 3.6 l

Fuel: ........................... unleaded petrol,

refer to fuel recommendations

Air filter: ................. Dry element filter

with foamed preliminary filter

(DUAL-ELEMENT)

Carburetor: .......... Throttle valve type

Rated speed: ........ 2,900...3,000 rpm

Top no-load speed: ...........3,000 rpm

Idling speed:...........1,250–1,600 rpm

Engine oil:

Filling quantity..................approx. 0.6 l

Multi-grade oil SAE 10 W-40

SG, SF or higher quality grade

Operability on Slopes:

max .................................... 30° (58 %)

(with oil level at “max“”= upper level

mark)

agria Grassland Mower 5300 17

3. Devices and Operating Elements

The grassland mower agria 5100 is

suited for agricultural and forestal op-

erations, green spaces and for winter

service operation. The following cutter

bars are available:

Universal SC cutter bar

105 cm (agria Item no. 5347 751)

122 cm (agria Item no. 5347 661)

Municipal cutter bar

105 cm (agria Item no. 5347 451)

Available attachment for winter service

operation:

Snow dozer

100 cm (agria Item no. 5396 012)

Engine

The four-stroke petrol engine runs on

commercial petrol (refer to fuel recom-

mendations p6).

During the first 20 operating hours

(break-in period) do not use engine to

maximum power.

Even after break-in period never use

engine at higher speed than necessary

for the work in hand.

High engine speed is harm-

ful to any engine and con-

siderably affects its durability. This

applies especially for no load opera-

tion. Any overspeed (have the engine

roar) can result in immediate damage.

Cooling System

The cooling system is fan-cooled. There-

fore keep screen at recoil starter and

cooling fins of cylinder clean and free

from sucked-in plant trash.

Idle running speed

Always ensure that idling-speed is ad-

justed correcty. With the speed control

lever set to idle, the engine is supposed

to run smoothly and without run-out at

low engine speed.

Air Filter

The air filter purifies the air intake. A

clogged filter reduces engine output.

Ignition System

The engine is equipped with a mainte-

nance-free, contactless electronic igni-

tion system.

We recommend to have necessary

check-ups done by an expert only.

Choke

The choke lever (B/5) is on the carbure-

tor.

Close the choke for cold starts.

Open the choke for warm starts

and operation.

Fuel tap

The fuel tap (B/13) is on the

carburetor.

18 agria Grassland Mower 5300

3. Devices and Operating Elements

Speed Control Lever

The speed control lever (C/9) on the

steering handle is for stepless setting

of engine speed from min. = idle to max.

= full throttle.

Engine Shut-off Switch

On pressing the electric shut-off switch

(C/3), the ignition is turned on or off.

Position “I” = Operation

Position “0” = Engine off

The engine shut-off switch also

serves to shut off the engine

in an emergency situation. Set the

switch to “0” for fast shut-off.

Safety Circuit

 Stop position: When releasing the

lever (C/4), the ignition system is turned

off (engine is shut off). Beware – en-

gine keeps running due to centrifugal

mass.

Start position: (for starting the en-

gine and for short breaks) Press down

the safety circuit lever, pull the clutch

lever (C/5) and lock with pawl (C/6).

 Operating position: To operate the

machine press safety circuit lever (C/4).

Do not fasten safety circuit

lever.

Release the safety circuit lever in

an emergency situation, the lever

automatically goes to STOP position.

C/3

C/4

C/5







C/6

max

min

C/9

agria Grassland Mower 5300 19

3. Devices and Operating Elements

Travelling Drive

Forward – Reverse

The grassland mower is equipped with a

clutch-integrated FR-gearshift, which is op-

erated via the hand clutch lever (C/5).

Travelling drive reverse speed:

Pull hand clutch lever (C/5) all the way up.

Travelling drive idling speed:

Pull hand clutch lever (C/5) approx. half way

– lock pawl.

Travelling drive forward speed:

Move hand clutch lever downwards (C/5)

– unlock pawl.

Pawl (C/6) is for fastening the hand clutch

lever in neutral position (“0”).

Clutch

Watch for the correct clutch play (X) to

avoid clutch slipping away during opera-

tion.

Note: Always park mower with

hand clutch lever pulled (“0” –

pawl locked), otherwise clutch problems

may arise due to deformation of V-belt.

C/6

C/5

20 agria Grassland Mower 5300

3. Devices and Operating Elements

Wheel-drive

engaged:

Move hand lever for wheel-drive (C/11)

down – pawl (C/10) is locked.

disengaged:

Pull hand lever for wheel-drive (C/11)

upwards – pawl is unlocked.

With engine running, engage wheel-

drive as follows:

Pull hand clutch lever (C/5) half way

(neutral) and hold.

Unlock pawl (C/10).

Move hand lever for wheel-drive

(C/11) downwards.

Slowly release hand clutch lever (C/5)

while pressing the throttle.

In case wheel-drive cannot be engaged,

couple and decouple. Then engage

wheel-drive.

Mowing Drive

The mowing drive is crank driven.

The mowing drive is engaged and dis-

engaged via the gear lever (C/7).

Only engage mowing drive when the

machine is decoupled (in neutral).

C/10

C/11

C/7

La pagina sta caricando ...

Agria 5300 Manuale del proprietario

Marca: Agria

Modello: 5300

Categoria: Tosa erba

Tipo: Manuale del proprietario

Scarica il pdf

rapporto

in altre lingue

English: Agria 5300 Owner's manual

Agria 5300 Manuale del proprietario

Agria 5300 Manuale del proprietario

in altre lingue

Documenti correlati

Altri documenti