ONKYO TX-NR636 Manuale utente

Marca: ONKYO

Modello: TX-NR636

Categoria: Ricevitori AV

Tipo: Manuale utente

TX-NR636

AV RECEIVER

Basic Manual

Advanced Manual found here

http://www.onkyo.com/manual/txnr636/adv/en.html

Before Start

Step 1:

Connections

About the Basic Manual

The Basic Manual leads you through the fundamental steps

to enjoy the AV Receiver from connections to TV, speaker

system and playback components, to necessary functions

for playback. As well as that, Basic Manual informs you with

the instructions on frequently used functions. Besides, there

is another part of the manual called Advanced Manual to

inform you with more detailed information, which we have

decided to publish on the web from the ecological point of

view.

Advanced Manual

Advanced Manual is always updated with the latest

information and its user friendly interface, which does not

matter whether you access from PC or Smartphone, helps

you to understand more deeply about the AV Receiver.

Advanced Manual is consisted of the following chapters.

• Details on AM/FM playback

• Playing Music Files on a USB Storage Device

• Listening to Internet Radio

• Playing Music with DLNA

• Playing Music Files in a Shared Folder

• Operating Music Files with the Remote Controller

• Listening Mode

• Advanced Settings

• Operating Other Components with the Remote Controller

• Connecting and Operating Onkyo RI Components

• Firmware Update

• Details on Troubleshooting

• Reference Information

Advanced Manual found here

http://www.onkyo.com/manual/txnr636/adv/en.html

Features

The unit is designed to be connected in between the TV and

the playback components such as Blu-ray disc player. Video

signal from the playback devices will be sent through the unit

to the TV and audio will be reproduced with the speakers

creating Dolby Digital or other kind of surround sound field.

The unit has many in/out jacks on its rear panel which allows

you to connect a lot of playback devices simultaneously.

• Equipped with 7 channel amplifier

• Incorporates Qdeo™ technology for HDMI video

upscaling (to 4K compatible)

• Equipped with 4K/60 Hz Passthrough-compatible HDMI

IN/OUT jacks (IN1 to IN4 of HDMI IN jacks are 4K

compatible)

•

Supports the HDMI Through function which allows

transmission from playback devices to the TV in standby state

• Supports HDCP2.2, a strict copy-protection for providing

high quality content

• Supports ARC (Audio Return Channel)

• Supports USB storage playback

• Supports variety of network functions such as Internet

Radio, DLNA, etc.

• Supports Wi-Fi, Bluetooth and MHL-enabled mobile

device

• Bi-Amping capability

•

A/V Sync Control Function to correct deviation of audio and

video

• Zone2 function which allows you to play a different

source in another room from the main room

• 32 bit DSP (Digital Signal Processor) with excellent

calculation performance

• Music Optimizer™ for Compressed Digital Music files

• Phase Matching Bass System

• Automatic speaker setup available using supplied

calibrated microphone (AccuEQ Room Calibration)

• Supports playback of MP3, WMA, WMA Lossless, FLAC,

WAV, Ogg Vorbis, Apple Lossless, DSD, Dolby TrueHD

via network and USB storage device

Supplied Accessories

Indoor FM antenna --- (1)

AM loop antenna --- (1)

Speaker Cable

Color labels for speaker cable --- (1)

Remote controller (RC-880M) --- (1)

Batteries (AA/R6) --- (2)

Power cord (Taiwanese model) --- (1)

Speaker setup microphone --- (1)



The number in parenthesis indicates the quantity. On packaging, the

letter at the end of the product name indicates the color.



How to use the remote controller

Batteries (AA/R6)

Remote control sensor

Approx.

16 ft. (5 m)

AV Receiver



If you do not use the remote controller for a long time, remove the batteries

to prevent leakage.



Note that keeping consumed batteries inside may cause corrosion resulting

in damage of the remote controller.

Step 1:

Connections

Connecting the TV and players

Important: The power cord must be connected only after all

other connections are completed.

HDMI cable connection

The unit has many HDMI jacks on its rear panel and each

of them corresponds to an input selector button of the same

name on the front panel. For example, a Blu-ray Disc player

will be connected to the IN 1 jack and the BD/DVD button

on the front panel will be used to listen to the playback

sound (if the player is CEC compliant, input will be switched

automatically). If you add another Blu-ray Disc player, you

can use any other jack than IN 1. It is possible to change

assignment of the input jacks and input selector buttons.

For how to make settings, see the Advanced Manual (http://

www.onkyo.com/manual/txnr636/adv/en.html).

To connect the TV and the unit, connect the HDMI OUT

MAIN jack of the unit and the HDMI IN jack of the TV

using an HDMI cable. With this connection, it becomes

possible to display the setting screen of the unit on the

TV or transmit video/audio signals from the player to the

TV. If your TV supports ARC (Audio Return Channel), it

is possible to play the TV sound with the AV receiver's

speakers with this connection only. If your TV does not

support ARC, you need, in addition to the HDMI OUT MAIN

jack connection, a digital optical cable connection between

the digital audio out optical jack of the TV and the DIGITAL

IN OPTICAL jack of the unit or an analog audio cable

connection between the audio output jack of the TV and the

TV/CD analog audio input jack of the unit.

DIGITAL

OPTICAL

OUT

AUDIO

OUT

Connection with a TV not supporting ARC



Select an appropriate

connection for your TV.

The unit supports the HDMI Through function that allows

transmission from players to the TV even if the unit is in

standby. You have to modify the settings to enable the

input selection link with CEC compliant device, connection

with ARC compatible TV, and HDMI Through function. See

HDMI

OUT

HDMI

OUT

HDMI

OUT

HDMI

OUT

HDMI

OUT

HDM

Blu-ray Disc/

DVD player

Set-top box/Digital

video recorder, etc.

Satellite/Cable

set-top box, etc.

Game console

Personal computer

HDMI cable

To use the ARC function, connect to the

ARC compatible HDMI jack of the TV.

Step 1:

Connections

the section 2 "2nd Step : Source Connection" of "Step 2:

Setting Up".

• To enjoy HDCP2.2 protected video, connect the player to

the IN3 jack and the TV to the HDMI OUT MAIN jack of

the unit. Your player and TV need to support HDCP2.2.

•

To play 4K or 1080p video, use the high speed HDMI cable.

•

Another TV can be connected to the HDMI OUT SUB jack.

To use the function to display the unit's setting screen on

the TV, connect the TV to the HDMI OUT MAIN jack.

•

It is possible to send video and audio of an MHL-enabled

mobile device by connecting the MHL-enabled mobile device

to the AUX INPUT HDMI/MHL jacks on the front panel.

Connecting Components without HDMI

If your AV component does not have HDMI jack, use an

available jack of your component for cable connection with

this unit. Just as the HDMI jacks, other jacks on this unit

have a preassigned input selector button on the front panel.

See the name of the input selector button shown with the

jack when connecting the device.



Audio signal connection

Digital connection: Use a digital optical cable

(OPTICAL) or digital coaxial cable (COAXIAL) for

connection.

Digital optical cable (OPTICAL)



As the digital in optical jack of the unit has a cover,

push in the cable against the cover as it is turned

inside.

Digital coaxial cable (COAXIAL)

Analog connection: Use an analog audio cable for

connection with a player.

To output audio of the Blu-ray Disc player or such other

player as the source of Zone playback, you need to

make analog connection using the analog audio cable

between the corresponding jacks of the player and this

unit. For details on the Zone function, see the section 6

"Using the ZONE function" of "Step 3: Playing Back".

Analog audio (RCA) cable

Connection with turntable: If it uses an MM type

cartridge and does not have a built-in audio equalizer,

connect it to the

PHONO jack. If the connected

turntable has a built-in audio equalizer, connect it to the

TV/CD jack.



If it uses an MC type cartridge, install an audio equalizer compatible

with MC type cartridge between the unit and the turntable by

connecting it to the

TV/CD jack. For details, refer to the turntable's

instruction manual.



If the turntable has a ground wire, connect it to the GND terminal of this

unit. If connecting the ground wire increases noise, disconnect it.



Video signal connection

The unit has a video upconversion function. For details, see

the section on the right.

Use a component video cable to connect a TV

with component video input jacks and a player with

component video output jacks.

Component video cable



Its transmitted video has higher quality than that of

composite video cable.

Use a composite video cable to connect a TV with

composite video input jack or a player with composite

video output jack.

Composite video cable

4 5

Video signals input to the composite video input

jack or the COMPONENT VIDEO input jacks will be

upconverted to HDMI signals and then output from

the HDMI output jack.

AV Receiver



When the video signals input to the COMPONENT VIDEO

jacks are upconverted and output from the HDMI output

jack, their resolution will be fixed to 480i. Set the output

resolution of the player to 480i/576i. If the input has 480p

or higher resolution, a message prompting you to change

the resolution setting will appear. If your player does not

support 480i/576i output, use the composite video jack.



If multiple video signal inputs are put into one input

system, the output will be made in the order of HDMI,

component video, and composite video. Note that it is not

possible to convert digital audio input signals to analog or

vice versa.

Step 1:

Connections

Connecting speakers

Important: The power cord must be connected only after all

other connections are completed.

12 9F 63

Front speakers

Center speaker

Surround speakers

Subwoofer

7 8

Surround back speakers

9 F

Height speakers

• 5.1 ch:

• 7.1 ch:

• 2 ch:

, 3 ch:

, 4 ch:

• Up to two subwoofers can be connected.

• When using the Zone function, refer to the section 6

"Using the ZONE function" of "Step 3: Playing Back".

It is ideal to install the front speakers and center speaker

at the height not too far from that of the screen. As for the

surround speakers, it is recommended to install at the

position slightly backward of the listening position and

higher than the listener's ears, since it is preferable to

obtain a diffused sound rather than a direct sound. As a

bass sound reproduced by subwoofer is less directional,

it is possible to place it at any position. Consider the best

installation position where a bass sound can be clearly

heard by listening to actual playback.

Subwoofer with built-

in power amplifier

Subwoofer with built-

in power amplifier

Surround R

Surround back/

height R

Surround back/

height L

Surround L

Center

Front R

Front L

If there is only one

surround back

speaker, connect

it to the BACK or

HEIGHT L terminal.

1/2"-5/8"(12-15 mm)

Important

:Connectspeakerswith6Ωto16Ωimpedance.

Using a speaker with less impedance than the supported

value may result in failure. (



)



In the European, Australian and Asian models, it is possible to connect

aspeakerwith4Ωimpedance.Youhavetomodifythesettingifanyof

thespeakershave4Ωormoretolessthan6Ωimpedance.Youcanset

up by viewing the guidance displayed on the TV screen. Select the item

with the cursor buttons of the remote controller and press ENTER to

confirm your selection. To return to the previous screen, press RETURN.

Press RCV and then HOME on the remote controller. Select "Setup" - "2.

Speaker Setup" - "Speaker Settings" - "Speaker Impedance" and change

the default value "6ohms" to "4ohms".

Cut and remove the plastic coating from the end of the

speaker cable, twist the core and connect it to the terminal.

Make correct connection between the unit's jacks and

speaker's jacks (+ to + and - to -) for each channel. If

Step 2:

Setting Up

Step 1:

Connections

connection is wrong, a bass sound may become poor due to

reverse phase. Attaching the supplied colored speaker cable

labels to the + side on the both ends of each channel's cable

will help correct connection. The subwoofer jack supports

connection of a subwoofer with built-in power amplifier. Set

the cut-off filter selection switch of the subwoofer to DIRECT.

If the subwoofer does not have a cut-off filter selection

switch but has a cut-off frequency adjusting dial, turn it to the

maximum frequency. If your subwoofer does not have built-in

power amplifier, you can connect a power amplifier between

the unit and the subwoofer.

• The speaker setting is 7.1 ch at the time of purchase. You

can change it manually or by using automatic speaker

setting.

• Short-circuiting the + cable and - cable or contacting the

cable core to the rear panel of the unit may cause failure.

Also do not connect two or more cables to one speaker

terminal or one speaker to several terminals.

• Using a speaker with less impedance than the setting

may result in failure.

When using commercially available banana plugs:

tighten the speaker terminals to the end and then insert the

banana plugs. Do not insert the cable core directly into the

hole for banana plug of speaker terminal. (North American

model)

Other connections

AM/FM antenna connections

Connect the antennas to listen to AM/FM broadcast. When

listening to the broadcast for the first time, adjust the

antenna position and orientation to get the best reception.

AM loop antenna (supplied)

Indoor FM antenna

(supplied)

Fix with a tack on

the wall.

(North American and

Taiwanese models)

(European, Australian

and Asian models)

Assemble the AM loop antenna (supplied).

Network connection

You can enjoy Internet radio and DLNA by connecting the

unit to LAN. The unit can be connected to the router with an

Ethernet cable or to the wireless LAN router with Wi-Fi

connection. In case of wired connection, connect the

Ethernet cable to the Ethernet port. See the section 2 "4th

Step : Network Connection" of "Step 2: Setting Up".

Internet radio

Router

NAS

Headphones connection

Connect stereo headphones with a standard plug (1/4

inch or ø 6.3 mm) to the PHONES jack on the front panel.

Sound from the speakers will be off while you are using the

headphones.

• If you selected any other listening mode than Pure

Audio (European, Australian and Asian models), Stereo,

Mono and Direct, connecting headphones will switch the

listening mode to Stereo.

Step 2:

Setting Up

Important: When the unit is turned on for the first time, the

setup wizard of the section 2 will automatically be launched.

If you use the setup wizard to make the initial setup,

connect a TV to the HDMI OUT MAIN jack of the unit via

HDMI connection.

Turning the power on

Connect the power cord to the outlet. Press

ON/

STANDBY on the main unit or

RECEIVER on the remote

controller to turn the unit on or to standby mode.

Initial Setup

Language Select

English

Deutsch

Français

Español

Italiano

Nederlands

Svenska

HOME Exit



Taiwanese models include a removable power cord. Connect the power

cord to AC INLET of the unit and then connect to the outlet. Always

disconnect the outlet side first when disconnecting the power cord. When

the unit is turned on, a large instantaneous current may flow affecting

functionality of the computer and other devices. It is recommended to

use a separate outlet from that for the computer or such other sensitive

devices.

Firmware update notification: If the unit is connected

via LAN and there is firmware update available, the

"Firmware Update Available" message will appear. To

execute updating, select "Update Now" with the cursor

buttons of the remote controller and press ENTER. When

"Completed!" appears, press

ON/STANDBY on the main

unit to turn the unit into standby mode. Then updating will

be completed.

Making the Initial Setup with the Setup

Wizard

Read before starting the procedure: Set up by

answering the guidance displayed on the TV screen.

Select the item with the cursor buttons of the remote

controller and press ENTER to confirm your selection.

To return to the previous screen, press RETURN.

• If you terminate the procedure on the way or

change the setting made in the initial setup and

want to call up the setup wizard again, press RCV

and then HOME on the remote controller, select

"Setup" - "7.Hardware Setup" - "Initial Setup", and

press ENTER.

Select the language first. In the next screen, the summary

of the setup wizard as below will be displayed. Select "Yes"

in this screen and press ENTER on the remote controller.

Welcome to initial setup. Have you connected all the speakers and devices?

Before starting, please connect speakers and sources.

Now, would you like to start initial setup?

1st Step : AccuEQ Room Calibration

2nd Step : Source Connection

3rd Step : Remote Mode Setup

4th Step : Network Connection

Yes

Initial Setup

ExitHOME

1st Step : AccuEQ Room Calibration

2nd Step : Source Connection

3rd Step : Remote Mode Setup

4th Step : Network Connection



1st Step : AccuEQ Room Calibration

The test tone coming from each speaker will be measured to

enable setting of the number of speakers, volume level, each

speaker's optimum crossover frequencies, and distance from

the primary listening position, and also enable correction of

distortion caused by the room acoustic environment.

Initial Setup

AccuEQ Room Calibration

This step you can automatically calibrate

your room to get correct surround sound.

Would you like to cailbrate your room now

or later?

Do it Now

Do it Later

HOME Exit

Place the speaker setup microphone.

When the start screen above is displayed, before

starting the procedure, place the supplied speaker setup

microphone at the measurement position



by referring to

the figure below.

Listening area Measurement position

with microphone



Correct measurement will not be possible if the microphone is held by

hand. Measurement is not possible if headphones are being used.



The subwoofer sound may not be detected since it is extremely low

frequencies. Raise the subwoofer volume to around the half of its

maximum volume and make its frequency to the maximum level.



A loud test tone will be heard during measurement. Measurement may

be interrupted if there is ambient noise or radio frequency interference.

Close the window and turn off the home appliance and fluorescent light.

Step 2:

Setting Up

After placing the microphone at the measurement

position, select "Do it Now" with the cursors and

press ENTER.

Connect the microphone to the SETUP MIC jack of

the unit.

SETUP MIC jack

Speaker setup

microphone

Follow the guidance displayed on the TV screen.

AccuEQ Room Calibration

Front Speakers Type

Powered Zone 2

Back/Height

Subwoofer

Normal

Back

Yes

Set bi-amp only if you use 2 channel amp for each front speaker.

ENTERNext

When the screen above is displayed, set the items with

the cursors on the remote controller. When the cursor

is on an item, the content of the item will be shown on

the lower left of the screen. After setting the items, press

ENTER on the remote controller. Press ENTER also in

the next screen,

The test tones sound from the connected speakers

and automatic speaker setting starts.

Measurement will be made twice for each speaker. It

takes several minutes to be completed. Keep the room

as quiet as possible during measurement. If any of

the speakers do not produce the test tone, check for

disconnection.

When the measurement is completed, the

measurement result is displayed.

Press

on the remote controller to check the

settings. Press ENTER with "Save" selected. In the next

screen showing that "AccuEQ" is "On", press ENTER on

the remote controller.

• If there is an error message, follow the on-screen

instruction to remove the error cause.

When "Please unplug setup microphone." is

displayed, disconnect the microphone.



2nd Step : Source Connection

You can check whether or not each input source is

connected correctly.

When the Source Connection start screen is

displayed, select "Yes, Continue" with the cursors

and press ENTER.

HOME Ex it

This step will start to check if the

connections were made correctly.

Would you like to continue?

Yes. Continue

No. Skip

Initial Setup

Source Connection

Select the desired input to check the connection and

press ENTER.

Start playback of the selected device. If connection is

correct, video/audio of the input source selected on the

unit will be played.

After checking the connection, select "Yes" with the

cursors and press ENTER.

• If you select "No" and press ENTER, the error cause

will be displayed. Follow the guidance to remove the

error cause and check the connection again.

Select "Yes" with the cursors and press ENTER

on the remote controller to check the connection

of other inputs or select "No, Done Checking" and

press ENTER to skip.

If you select "Yes", you will return to the screen of step 2.

If you select "No, Done Checking", you will proceed to

step 5.

Enabling HDMI Linked Operation and Other

Functions

In the next screen, you can enable the HDMI linked

operation with CEC compliant device, connection with

ARC compatible TV, and HDMI Through function. Select

"Yes" with the cursors to enable them or "No, Done

Checking" to skip, and press ENTER on the remote

controller.

Select "Yes" with the cursors and press ENTER to

enable the CEC link function or select "No" and

press ENTER to keep it disabled.

The following CEC-compatible devices are found;

Do you wish to turn on the CEC link?

Integra DHS-8.8

Yes

Source Connection

HOME Ex it

If you select "Yes", the connection with ARC compatible

TV and HDMI Through function will be set to "Auto" and

enabled.y



3rd Step : Remote Mode Setup

In this step, you can enable operation of the other

components using the remote controller of the unit. When

the Remote Mode Setup start screen is displayed, select

"Yes" with the cursors and press ENTER on the remote

controller. Follow the guidance to select the desired

REMOTE MODE button and in the keyboard screen, enter

the first three characters of the brand name of the device

you are going to program (e.g., "ONK" for ONKYO) and

search for the remote control code. The guidance will also

explain how to set the remote controller.

HOME Ex it

Initial Setup

Remote Mode Setup

Preprograming remote will give you control

of other devices from AV receiver remote

Would you like to setup your remote to

control your devices? This may take a while

depending on what and how many you have

connected. You can always come back to remote

setup from setup “8-2 Remote Mode Setup”.

Yes

No. Skip

Step 2:

Setting Up



4th Step : Network Connection

Do you want to connect network connection?

It gives you network services that our AV

receiver support. If you wish to skip this step.

select “No. Skip”.

Yes

No. Skip

HOME Ex it

Initial Setup

Network Connection

You can check the network connection and make the Wi-Fi

setting. When the Network Connection start screen is

displayed, select "Yes" with the cursors and press ENTER

on the remote controller. If you select "Wired" in the next

screen, you can view the LAN cable connection status. To

make the Wi-Fi setting, select "Wireless", press ENTER on

the remote controller and follow the sections below.

Make the following preparations.

Wi-Fi connection requires an access point such as

wireless LAN router (



). Write down the SSID and

password (key) of the access point if they are shown

in the label of the main body. If the access point has

an automatic setting button (may be called differently

according to the manufacturer), you can set up

without inputting the password. For how to use the

automatic setting button of the access point, refer to

its instruction manual.



The unit supports Wi-Fi connection with 2.4 GHz

access point.

Select the SSID of the access point to be connected

with the cursor buttons and press ENTER.

When the SSID of the access point appears on the TV

screen, select the desired access point.

• If you changed the initial setting of the access point to

skip password entry, Step 3 starts automatically.

• If you changed the initial setting of the access point

to hide the SSID, see "When the access point is not

displayed".

Select and set the authentication method.

Wi-Fi Setup

Select the authentication method.

Enter Password

Push Button

PIN code

When the screen above is displayed, select and set one

of the three authentication methods: "Enter Password",

"Push Button" and "PIN code". See below for details of

and how to set each method.

Enter Password: Enter the password of the access point to

establish connection.

Select "Enter Password" with the cursor buttons and

press ENTER.

Enter the password (



) on the keyboard screen, select

"OK" with the cursor buttons and press ENTER.

• The keyboard screen may be displayed automatically

if the access point device does not have an automatic

setting button.



Select "Shift" and press ENTER to toggle between upper and lower

case. Select "



" or "



" and press ENTER to move the cursor to the

selected direction. Select "Back Space" and press ENTER to delete

the character at the left of the cursor position. To select whether to

mask the password with "*" or display it in plain text, press D on the

remote control. Press + 10 on the remote controller to enable the

"Shift" function and CLR to delete all the input characters.

If the security method of the access point to be

connected is WEP, select "Default Key ID", select "OK"

and press ENTER.

Push Button: Use the automatic setting button of the

access point to establish connection.

Select "Push Button" with the cursor buttons and press

ENTER.

Hold down the automatic setting button of the access

point for the necessary seconds, select "OK" with the

cursor buttons and press ENTER.

PIN code: Select this method when the automatic setting

button of the access point is beyond the reach. Select "PIN

code" with the cursor buttons and press ENTER to display

the 8-digit PIN code. Register the displayed PIN code to the

access point, select "OK" with the cursor buttons and press

ENTER. For how to register the PIN code to the access

point, refer to its instruction manual.

Establish connection.

The connection process starts and the Wi-Fi indicator

on the left of the unit's display starts flashing. When

connection has been established, the Wi-Fi indicator

changes from flashing to staying lit. If the Wi-Fi indicator

does not stay lit, connection has not been established.

Make the setting again. If "Push Button" does not work,

try "Enter Password".

When the access point is not displayed

Select "Other..." with the

cursor on the remote

controller and press ENTER to display the keyboard

screen. Input the SSID and password. Make the

following settings according to the router setting.



WPA/WPA2 method

Select "WPA" or "WPA2" in "Security Method", select

"OK" and press ENTER.



WEP method

Select "WEP" in "Security Method" and select

"Default Key ID". Then select "OK" and press ENTER.

• If encryption setting has not been made on the

wireless LAN router, select "None" in "Security

Method", select "OK" and press ENTER.



Exiting the setup wizard

After finishing the initial setup, keep "Finished" selected

and press ENTER on the remote controller. Connection and

setting of the unit is now completed. See Step 3 and enjoy

your home theater.

Step 3:

Playing Back

Playing the player and TV



To control the unit: You can control any other device

than this unit if you register the specified remote control

code to

REMOTE MODE. As the remote controller

may be in the remote mode that enables control of other

devices, be sure to press

RCV to select the RECEIVER

mode (for controlling this unit) before operating the unit.

Turn the power on.

Press

RECEIVER on the remote controller to turn

the power on.

• Switch the input on the TV to that assigned to the

unit. Use the TV's remote controller.

Select the input of the unit and start playback on the

player or TV.

• Press

INPUT SELECTOR to which the desired

player has been assigned. Press TV/CD to play the

TV's sound. You can also use the input selector

buttons on the main unit.

• Input will automatically be selected if the TV or player

is CEC compliant and connected to the unit with

HDMI cable.

Select the desired listening mode.

Press

listening mode buttons to switch the mode so

that you can enjoy different listening modes. For details

about the listening modes, see "Listening modes" on the

next page.

Adjust the volume with

Remote controller parts name

RECEIVER button: Turns the unit on or into standby

mode.

RCV button: Switches the remote controller to the

mode for operating this unit.

REMOTE MODE/INPUT SELECTOR button: Switches

the input to be played.

Cursor buttons and ENTER button: Moves the cursor

and confirms the selection.

Q SETUP button: Displays the Quick Setup menu that

allows you to set the frequently used functions including

input selection and volume adjustment.

Listening mode buttons: Allows you to select the

listening mode.

DIMMER button: Switches the brightness of the display.

ZONE2 button: For use when the unit is connected with

a pre-main amplifier in a separate room and sound is

played there.

MUTING button: Temporarily mutes audio.

VOLUME buttons: Allows you to adjust the volume.

RETURN button: Returns the display to the previous

state.

HOME button: Displays the Home menu that allows you

to make advanced settings and use Internet radio and

DLNA.

DISPLAY button: Switches the information on the

display.

• The buttons other than those above are for operating

other devices.

Step 3:

Playing Back

Listening modes

Select the desired mode by switching and listening actual

sound in different modes. The selectable listening modes

depend on the format of the input signals.

MOVIE/TV: You can select a listening mode suitable for

movies and TV programs.

MUSIC: You can select a listening mode suitable for music.

GAME: You can select a listening mode suitable for games.

STEREO: You can select a listening mode for stereo and all

channel stereo sources.

PURE AUDIO (main unit only) (European, Australian

and Asian models): The display and analog video circuits

are cut off to provide purer sound.

• For details on the listening modes, see the Advanced

Manual (http://www.onkyo.com/manual/txnr636/adv/

en.html).

"Direct" for playing the input signals as-is

Selecting this mode allows the input signals to be

played as they are. For example, 2 ch signals of music

CD will be played in stereo, 5.1 ch signals in 5.1 ch,

and Dolby Digital signals of blu-ray disc or DVD in the

Dolby Digital sound field according to the specified

number of channels.

Other useful functions



Playing Video and Audio from Different Sources: It

is possible to play audio and video from different sources.

For example, you can play audio from the CD player and

video from the BD/DVD player. In this case, press BD/DVD

and then TV/CD. Then start playback on the BD/DVD player

and CD player. This function is effective when an input with

audio only has been selected (TV/CD, TUNER or PHONO

in the initial setting).



Muting Temporarily: Press MUTING on the remote

controller. Press MUTING again to cancel muting.



Changing the Display Brightness: Press DIMMER on

the remote controller several times to select the desired

brightness.



Changing the Input Display: Press DISPLAY on the

remote controller several times to switch the display of the

main unit in order of:

Input source &

volume

Listening mode

Signal format

Sampling

frequency

Input signal

resolution

Output resolution

• If "Dolby D 5.1" is displayed in signal format, the

Dolby Digital 5.1 ch signals are being input. When

listening to AM/FM radio, the band, frequency and

preset number are displayed.

Listening to AM/FM Radio

The Basic Manual explains the method using automatic

tuning. For manual tuning, see the Advanced Manual

(http://www.onkyo.com/manual/txnr636/adv/en.html).

Press TUNER on the main unit several times to

select either "AM" or "FM".

Press TUNING MODE on the unit, so that the "AUTO"

indicator on the display lights.

Press TUNING on the unit.

The automatic tuning to a radio station starts. Searching

stops when one is tuned. When tuned into a radio

station, the "

TUNED " indicator on the display lights.

The "FM STEREO" indicator lights if the radio station is

an FM radio station.

TUNED

FM STEREO

AUTO

Registering an AM/FM Radio Station:

It allows you to register up to 40 of your favorite AM/FM

radio stations.

1. Tune into the AM/FM radio station you want to

2. Press MEMORY on the unit.

The preset number on the display flashes.

3. Repeatedly press

PRESET on the unit to select

a number between 1 and 40 while the preset number

is flashing (about 8 seconds).

4. Press MEMORY on the unit again.

When registered, the preset number stops flashing.

To select a preset radio station, press

PRESET

on the main unit or CH +/- on the remote controller.

Step 3:

Playing Back

Connecting and playing the Bluetooth-

enabled device

You can wirelessly enjoy music files stored in a smartphone

or other Bluetooth-enabled device. The coverage area is 48

feet (15 meters).

• The Bluetooth-enabled device needs to support the

A2DP profile.

• Note that connection is not always guaranteed with all

Bluetooth-enabled devices.

Pairing

Pairing is necessary when using the Bluetooth-enabled

device for the first time. Before starting the procedure, learn

how to enable the Bluetooth setting function and to connect

with other devices on the Bluetooth-enabled device.

Press BLUETOOTH on the remote controller.

The unit enters the pairing mode and the BLUETOOTH

indicator starts flashing.

While the BLUETOOTH indicator is flashing,

complete connection on the Bluetooth-enabled

device in the nearby area within about 2 minutes.

If the name of this unit is displayed on the Bluetooth-

enabled device's display, select this unit. Paring will end

after a short time.

• If a password is requested, enter "0000".

•

When connecting the unit to any other Bluetooth-

enabled device, start pairing by pressing and holding

BLUETOOTH until the BLUETOOTH indicator starts

flashing. This unit can store the data of up to ten paired

devices.

Playing sound of the Bluetooth-enabled device

If the unit is on and the Bluetooth-enabled device is

connected, the input will be automatically switched to

BLUETOOTH. Play music in this state.

• It may take about a minute until connection is established

when the unit is on since the Bluetooth function takes

some time to start up.

• If the volume setting on the Bluetooth-enabled device is

low, the sound will not be output from this unit.

• Due to the characteristics of Bluetooth wireless

technology, the sound produced on this unit may slightly

be behind the sound played on the Bluetooth-enabled

device.

Using the Home menu

In the Home menu, you can make advanced settings and

use Internet radio and DLNA.

After pressing RCV, press HOME on the remote

controller.

The Home menu is displayed on the TV screen. You can

also use the HOME button on the main unit.

Setup

HOME

Select the item with the cursor buttons of the

remote controller and press ENTER to confirm your

selection.

• For details on the Setup menu and how to play

Internet radio, DLNA and USB storage device, see

the Advanced Manual (http://www.onkyo.com/manual/

txnr636/adv/en.html).

• To return to the previous screen, press RETURN. To

return to the Home menu, press HOME.



Sleep Timer: Select to turn the unit into standby mode

automatically when the specified time elapses.



InstaPrevue: Select to preview videos input from the

HDMI input jacks collectively in a single screen. The screen

has a main window (current input video) and sub windows

(other input videos). To switch the current input, select the

desired sub window with the cursor buttons and press

ENTER.

• A black sub window is shown for the input with no video

signals.

• "InstaPrevue" cannot be selected if the video is being

input from HDMI IN 6 or there is no signal from the input

currently selected.

• Depending on video signals, the picture may not be

properly rendered on the preview thumbnails.

• 1080p or higher resolution is not supported.



Setup: You can change the assignment of input terminals

and input selector buttons and also make various speaker

settings and other advanced settings.



Network Service: Select to use various Internet radio

services and DLNA.

• "Network Setup" becomes selectable after the network

starts up even if it cannot be selected first. It may take

about a minute to start up.

• When "Network Service" is selected for the first time,

the "DISCLAIMER" screen will appear on the TV. Select

"Agree" if you agree the content. If you do not agree the

content, you cannot use the network service.



You cannot use the function unless the TV is connected via HDMI since

selecting "Agree" in the "DISCLAIMER" screen is not possible.

• Layout of the icons in the "Network Service" top menu

can be changed. Press NET on the remote controller

and press D. Select the source icon with the cursors and

press ENTER, and then select the destination icon and

press ENTER. The positions of the icons are switched

each other.



USB: Select to connect a USB storage device to the USB

port so that it can be played.

• "USB" becomes selectable after the USB function starts

up even if it cannot be selected first. It may take about a

minute to start up.

Step 3:

Playing Back

Using Quick Setup menu

In the Quick Setup menu, you can set frequently used

functions including input selection and volume adjustment.

Press Q SETUP on the remote controller.

The Quick Setup menu is displayed on the connected

TV's screen.

CBL/SAT

Input

Audio

Video

Information

Listening Mode

BD DVD

CBL/SAT

STB DVR

GAME

AUX

Select the item with the cursor buttons of the

remote controller and press ENTER to confirm your

selection.

• To return to the previous screen, press RETURN.



Input: Select the input and check the assignment of input

selector buttons.



Audio:

A/V Sync: If the video is behind the audio, you can

delay the audio to offset the gap.

• It cannot be set when audio is played from the TV's

speakers.

• It cannot be set if the input is "NET", "USB" or

"BLUETOOTH".

• It cannot be set if the listening mode is Pure Audio

(European, Australian and Asian models) or Direct.

Bass, Treble: Adjust volume of the front speaker.

• It cannot be set if the listening mode is Pure Audio

(European, Australian and Asian models) or Direct.

Phase Matching Bass: Suppress phase shift in the

midrange to enhance bass sound. Thus smooth and

powerful bass sound can be obtained.

• It cannot be set if the listening mode is Pure Audio

(European, Australian and Asian models) or Direct.

Subwoofer Level, Center Level: Adjust the speaker

level while listening to the sound. The adjustment you

made will be reset to the previous status when you turn

the unit to standby mode.

• The speakers cannot be adjusted if they have been

set to "No" or "None" in "Speaker Configuration".

AccuEQ Room Calibration: Disables the sound field

correction setting set in the automatic speaker setting.

The setting can be separately set to each input.

• This setting cannot be selected if the automatic

speaker setting has not been performed.

• It cannot be set if headphones are connected or the

listening mode is Pure Audio (European, Australian

and Asian models) or Direct.

Late Night: Make small sounds to be easily heard. It

is useful when you need to reduce the volume while

watching a movie late night. You can enjoy the effect

on Dolby Digital, Dolby Digital Plus and Dolby TrueHD

sources only.

• Turning the unit to standby mode will set the setting

to "Off". In case of Dolby TrueHD, the setting will be

set to "Auto".

Music Optimizer: Improve the quality of the

compressed audio. Playback sound of lossy

compressed files such as MP3 will be improved. The

setting can be separately set to each input.

• The setting is effective in the signals of 48 kHz or

less. The setting is not effective in the bitstream

signals.

• It cannot be set if the listening mode is Pure Audio

(European, Australian and Asian models) or Direct.

Cinema Filter: Adjust the soundtrack that was

processed to enhance its high pitch range, in order to

make it suitable for home theater.

• This function can be used in the following listening

modes: Dolby Digital, Dolby Digital EX, Dolby Digital

Plus, Dolby TrueHD, Dolby PLIIx Movie, Dolby PLII

Movie, Dolby PLIIz Height, Multichannel, DTS, DTS-

ES, DTS Neo:6 Cinema, DTS 96/24, DTS Neo:6,

DTS-HD High Resolution Audio, DTS-HD Master

Audio and DTS Express



Video:

Monitor Out: The video input signals input to the unit

will be converted by the unit when they are output from

the HDMI OUT jack to the TV so that their resolution can

match that of the TV used. Select the HDMI OUT jack to

be used for output.

Wide Mode: You can set the aspect ratio.

Picture Mode: You can adjust the image quality.

"Cinema" will automatically adjust the image to be

suitable to watch movie and "Game" suitable to play

game. In "Standard", the resolution will be changed but

the image quality will not be adjusted. In "Custom", you

can adjust the brightness, contrast, hue and saturation

as desired. If you do not adjust the resolution and image

quality, select "Bypass".

• "Wide Mode" and "Picture Mode" can be set only on

the video output from the HDMI OUT MAIN jack.



Information:

Audio: Displays the audio input source, format, number of

channels, sampling frequency, listening mode, number of

output channels, and other audio information.

Video: Displays the video input source, resolution, signal

format, color tone, 3D information, Aspect, Picture Mode,

output, and other Video information.

Tuner: Displays the band, frequency, preset number, and

other tuner (radio) information.



Listening Mode: Select the listening mode from the

categories of "MOVIE/TV", "MUSIC" and "GAME".

• It cannot be set when audio is played from the TV's

speakers.

Step 3:

Playing Back

Using the ZONE function

You can connect the unit with a pre-main amplifier or

speakers in a separate room and playback audio sources

from an external device connected to the analog audio input

jacks of the unit. And also, you can enjoy sources of "NET",

"USB", "BLUETOOTH" as well as AM/FM broadcasting.

It is also possible to play the sound from different analog

connected devices in the main room and separate room.

•

As for the "NET", "USB" and "BLUETOOTH", you cannot

select different inputs for the main room and separate

room. For example, if "NET" has been selected in the

main room and then "USB" is selected as playback

source in the separate room, the input in the main room

will change to "USB" accordingly.

•

When listening to AM/FM broadcasting, you cannot select

different stations for the main room and separate room.

Therefore broadcasting of the same station will be heard

in the both rooms.

Connecting with Player

To output audio of the Blu-ray Disc player or such other player

as the source of Zone playback, it is necessary to connect the

RCA audio output jacks of the player and the analog audio

input jacks of the unit using the analog audio cable.

AUDIO

OUT

•

Output to Zone is not possible if the connection is only

with HDMI cable or digital cable.

•

Analog audio output setting may be necessary on the player.

Making ZONE connection



Connecting an amplifier or receiver in another room

You can enjoy 2-channel stereo playback in the other room

during playing 7.1-channel in the main room.

Connect the ZONE2 LINE OUT jacks of the unit and the

line-in jacks of the pre-main amplifier in a separate room

with an analog audio (RCA) cable.

Zone 2

• The volume should be adjusted with the pre-main

amplifier used in the separate room.



Connecting speakers in another room

It is possible to directly connect the speakers in another

room without an amplifier. Connect the speakers in another

room to the ZONE2 speaker terminals of the unit using

speaker cables. In this case, 5.1 ch will be the maximum in

the main room when the Zone function is on.



Change the setting: After connecting the speakers,

press RCV and then HOME on the remote controller, select

"Setup" - "2.Speaker Setup" - "Speaker Settings" and set

"Powered Zone2" to "Yes", and press ENTER on the remote

controller.

Zone 2

•

Adjust the volume on this unit. To adjust the volume,

press ZONE2 on the remote controller and adjust with

VOL





. You can mute the sound by pressing MUTING.

Performing ZONE playback

Press ZONE2 on the remote controller, point the

remote controller at the remote controller sensor and

press

RECEIVER.

"Z2" lights on the main unit display and the Zone function

is enabled. (ZONE 2 is now on.)

Press ZONE2 on the remote controller again and

press INPUT SELECTOR of the input to be played in

a separate room.

To play the same source in the main room and separate

room, hold down ZONE2 for approximately 3 seconds.



To control on the main unit, press ZONE2 and within 8 seconds, press

the input selector button of the input to be played in a separate room.

(To play the same source in the main room and separate room, press

ZONE2 twice.)

To turn off the ZONE function: Press ZONE2 on the

remote controller and press

RECEIVER. Alternatively

press OFF on the main unit.

•

Zone playback is not possible if the player and the unit

are connected via HDMI cable or digital cable. Connect

the player to the analog audio input jacks of the unit with

analog audio cable. Analog audio output setting may be

necessary on the player.

•

If ZONE 2 is on, power consumption during standby

becomes larger than normal.

•

If ZONE 2 is turned on when the listening mode of the

main room is Pure Audio, it will automatically switch to

Direct. (European, Australian and Asian models)

•

While ZONE 2 is on, the RI linked system function

(interlink between Onkyo components) is disabled.

1 24 9 F G H I K6 L3 578 J

P QO

(European, Australian

and Asian models)

(European, Australian

and Asian models)

Front Panel

ON/STANDBY button: Turns the unit on or into

standby mode.

BLUETOOTH indicator: Flashes while pairing with a

Bluetooth-enabled device is in progress and stays lit

when pairing is completed.

Wi-Fi indicator: Lights when the unit is connected to

the wireless LAN router.

ZONE 2 button: Controls the ZONE function.

Remote control sensor: Receives signals from the

remote controller.

OFF button: Switches the ZONE function to off.

Display

LISTENING MODE buttons: Allows you to select the

listening mode.

DIMMER button (North American and Taiwanese

models): Switches the brightness of the display.

RT/PTY/TP button (European, Australian and Asian

models): Can be used when receiving the station

transmitting text information.

MEMORY button: Registers or deletes a station.

TUNING MODE button: Switches the tuning mode.

DISPLAY button: Switches the information on the

display.

HOME button: Displays the Home menu.

Cursor buttons,

TUNING

button,

PRESET

button and ENTER button: Moves the cursor and

confirms the selection. When listening to AM/FM

broadcasting, tune in to the station with

TUNING

select the registered station with

PRESET

RETURN button: Returns the display to the previous

state.

MASTER VOLUME: Allows you to adjust the volume.

MUSIC OPTIMIZER button and indicator (North

American and Taiwanese models): Turns on/off the

MUSIC OPTIMIZER function that improves the quality of

the compressed audio.

PURE AUDIO button and indicator (European,

Australian and Asian models): Switches to the PURE

AUDIO mode.

PHONES jack: Stereo headphones with a standard plug

are connected.

AUX INPUT HDMI/MHL jacks: An HD video camera or

MHL-enabled mobile device is connected. It is possible

to send video and audio of an MHL-enabled mobile

device.

TONE and Tone Level buttons: Adjusts the high tone

and low tone.

Input selector buttons: Switches the input to be

played.

USB port: A USB storage device is connected so that

music files stored in it can be played.

SETUP MIC jack: The supplied speaker setup

microphone is connected.

HYBRID STANDBY indicator: Lights if the unit enters

standby mode when the HDMI Through, network

standby or Wakeup from Bluetooth function is enabled.

Troubleshooting

2 3 5 7

FG9 H I

(Taiwanese model)

Rear Panel

RI REMOTE CONTROL jack: An Onkyo product with RI

jack can be connected and synchronized with this unit.

FM ANTENNA jack (75 Ω) and AM ANTENNA

terminal: The supplied antennas are connected.

COMPONENT VIDEO IN and OUT jacks: Component

video input/output jacks

ETHERNET port: Used for LAN connection

HDMI IN/OUT jacks: Digital video signals and audio

signals are transmitted between the unit and the

connected devices.

SPEAKERS terminals: Speakers are connected. To use

the Zone function, connect the speakers in the separate

room to the ZONE2 speaker terminals.

Power cord (North American, European, Australian

and Asian models)

AC INLET (Taiwanese model): The power cord is

connected.

DIGITAL IN COAXIAL/OPTICAL jacks: Digital audio

signals are input.

GND terminal: The ground wire of the turntable is

connected.

Composite video and analog audio jacks: Analog

video signals and audio signals are input.

MONITOR OUT V jack: Video signals are output to the

connected monitor or TV.

ZONE 2 LINE OUT jacks: Analog audio signals are

output to the connected amplifier to be used in ZONE 2.

SUBWOOFER PRE OUT jacks: A subwoofer with built-

in amplifier is connected.

14 623 75

Display

Lights in the following conditions. "Z2": ZONE 2 output is

on. / "HDMI": HDMI signals are input and

HDMI input selector is selected. / "ARC": Audio signals

are input from ARC compatible TV and TV/CD input

selector is selected. / "3D": Input signals are 3D. /

"USB" (



): "USB" input is selected and USB storage

device is connected. / "NET" (



): "NET" input is

selected and the unit is connected to the network. /

"DIGITAL": Digital signals are input and the digital input

selector is selected. / Cursor indicators: NET or USB is

controlled.



"USB" and "NET" will flash if the connection is not correct.

Lights when headphones are connected.

Lights when NET or USB is controlled.

Lights according to the type of input digital signals and

the listening mode.

Lights when Music Optimizer is enabled.

Lights in the following conditions. "AUTO": Tuning mode

is auto. / "



TUNED



": Receiving AM/FM radio.



flasheswhiletuningisautomaticallyperformed./"FM

STEREO": Receiving FM stereo. / "RDS" (European,

Australian and Asian models): Receiving RDS

broadcasting.

"MUTING": Flashes when muting is on.

Lights in the following conditions. "SLEEP": Sleep timer

has been set. / "ASb" (Auto Standby): Auto Standby

is on. / "ch": Channel is being set. / "Hz": Crossover

frequencies are being set. / "m/ft": Speaker distances

are being set. / "dB": Speaker volume is being set.

Displays various information of the input signals.

Pressing DISPLAY displays the type of input digital

signals and the listening mode.

Troubleshooting

Before starting the procedure

Problems may be solved by simply turning the power

on/off or disconnecting/connecting the power cord,

which is easier than working on the connection,

setting and operating procedure. Try the simple

measures on both the unit and the connected

device. If the problem is that the video or audio is not

output or the HDMI linked operation does not work,

disconnecting/connecting the HDMI cable may solve

it. When reconnecting, be careful not to wind the

HDMI cable since if wound the HDMI cable may not fit

well. After reconnecting, turn off and on the unit and

the connected device.

The AV receiver turns off unexpectedly.

• The AV receiver will automatically enter standby mode

when Auto Standby is set and launched.

There’s no sound, or it’s very quiet.

• A wrong input selector button has been selected. Select

a correct input for the player. Also check that muting is

not on.

• Not all listening modes use all speakers.

There’s no picture.

•

A wrong input selector button has been selected.

• Video is not displayed if the listening mode is Pure Audio.

(European, Australian and Asian models)

• To display video from the connected player on the TV

screen while the unit is in standby, you need to enable

HDMI Through function.

• When the TV image is blurry or unclear, power cord or

connection cables of the unit may have interfered. In

that case, keep distance between TV antenna cable and

cables of the unit.

HDMI control does not function correctly.

• Set the CEC link function of the unit to on. It is also

necessary to make the HDMI linked system setting on

the TV. See the TV's instruction manual for details.

The remote controller does not work.

• Be sure to press RCV first before operating the unit with

the remote controller.

There is no sound for Zone function.

• With Zone function, sound is output only when the signal

input source is an external component connected to

the analog audio input jacks of the unit, "NET", "USB"

or "BLUETOOTH". Zone playback is not possible if the

player and the unit are connected via HDMI cable or

digital cable. Connect the RCA audio output jacks of the

player and the analog audio input jacks of the unit with

analog audio cable. Also analog audio output setting may

be necessary on the player.

Cannot access to network.

• Try plugging/unplugging the unit or the wireless LAN

router or check their power-on status. This will work well

in many cases.

• If the desired wireless LAN router is not in the access

point list, it may be set to hide SSID or the ANY

connection may be off. Change the setting and try again.

Bluetooth

• Try plugging/unplugging the unit and the Bluetooth-

enabled player. After that, check that the Bluetooth

function is enabled on the Bluetooth-enabled device and

the connection with the unit has been established.



Resetting the unit

Resetting the unit to the status at the time of shipment may

solve the problem. If the measures above do not solve the

problem, reset the unit with the following procedure. If you

reset the unit status, your preferences will be reset to the

defaults. Note them down before starting reset.



How to reset:

While holding down CBL/SAT on the main unit (note

that step 2 must be performed with this button

pressed down)

Press

ON/STANDBY on the main unit ("Clear"

appears on the display and the unit returns to

standby)

Clear

While holding

down CBL/SAT,

Press

ON/

STANDBY.



How to reset the remote controller:

While holding down RCV on the remote controller,

press HOME until the remote indicator lights (about

3 seconds)

Within 30 seconds, press RCV again

RCV

Remote

indicator

HOME

Specifications

Others

Amplifier Section

Rated Output Power

All channels:

95 watts minimum continuous power per channel, 8 ohm loads,

2 channels driven from 20 Hz to 20 kHz, with a maximum total

harmonic distortion of 0.08% (FTC)

115 watts minimum continuous power per channel, 6 ohm loads, 2

channels driven at 1 kHz, with a maximum total harmonic distortion

of 0.7% (FTC)

(North American)

7 ch × 160 W at 6 ohms, 1 kHz, 1 ch driven of 1% (IEC) (Others)

Maximum Effective Output Power

7 ch × 175 W at 6 ohms, 1 kHz, 1 ch driven (JEITA) (Asian)

Dynamic Power (



)



IEC60268-Short-term maximum output power

 240W(3Ω,Front)

 210W(4Ω,Front)

 120W(8Ω,Front)

THD+N (Total Harmonic Distortion+Noise)

0.08% (20 Hz - 20 kHz, half power)

Damping Factor

 60(Front,1kHz,8Ω)

Input Sensitivity and Impedance (Unbalance)

 200mV/47kΩ(LINE)

 2.5mV/47kΩ(PHONOMM)

Rated RCA Output Level and Impedance

 200mV/2.2kΩ(LINEOUT)

Maximum RCA Output Level and Impedance

 2V/2.2kΩ(LINEOUT)

Phono Overload

70 mV (MM 1 kHz 0.5% Direct)

Frequency Response

5 Hz - 100 kHz/+1 dB, –3 dB (Direct mode)

Tone Control Characteristics

±10 dB, 20 Hz (BASS)

±10 dB, 20 kHz (TREBLE)

Signal to Noise Ratio

106 dB (LINE, IHF-A)

80 dB (PHONO MM, IHF-A)

Speaker Impedance

 6Ω-16Ω(NorthAmericanandTaiwanese)

 4Ω-16Ω(Others)

Video Section

Input Sensitivity/Output Level and Impedance

 1Vp-p/75Ω(ComponentY)

 0.7Vp-p/75Ω(ComponentP

, P

)

 1Vp-p/75Ω(Composite)

Component Video Frequency Response

5 Hz - 100 MHz/+0 dB, –3 dB

Tuner Section

FM Tuning Frequency Range

87.5 MHz - 107.9 MHz (North American and Taiwanese)

87.5 MHz - 108.0 MHz, RDS (Others)

AM Tuning Frequency Range

522/530 kHz - 1611/1710 kHz

Preset Channel

Network Section

Ethernet LAN

10BASE-T/100BASE-TX

Wireless LAN

IEEE 802.11 b/g/n standard

(Wi-Fi

standard)

2.4 GHz band:

1 - 11 ch (North American)

10 - 11 ch (Spain)

10 - 13 ch (France)

1 - 13 ch (Others)

(Wi-Fi

standard)

Bluetooth Section

Communication system

Bluetooth Specification version 2.1 +EDR (Enhanced Data Rate)

Maximum communication range

Line of sight approx. 15 m (



)

Frequency band

2.4 GHz band (2.4000 GHz - 2.4835 GHz)

Modulation method

FHSS (Freq Hopping Spread Spectrum)

Compatible Bluetooth profiles

A2DP 1.2 (Advanced Audio Distribution Profile)

AVRCP 1.3 (Audio Video Remote Control Profile)

Supported Codecs

SBC

Transmission range (A2DP)

20 Hz - 20,000 Hz (Sampling frequency 44.1 kHz)



The actual range will vary depending on factors such as obstacles between

devices, magnetic fields around a microwave oven, static electricity,

cordless phone, reception sensitivity, antenna’s performance, operating

system, software application, etc.

General

Power Supply

AC 120 V, 60 Hz (North American and Taiwanese)

AC 220 - 240 V, 50/60 Hz (Others)

Power Consumption

6.3 A (North American and Taiwanese)

630 W (Others)

0.1 W (Stand-by, North American and Taiwanese)

0.2 W (Stand-by, Others)

80 W (No-sound)

Dimensions (W × H × D)

435 mm × 173.5 mm × 329 mm

17-1/8" × 6-13/16" × 12-15/16"

Weight

10.0 kg (22.0 lbs.) (North American and Taiwanese)

10.5 kg (23.1 lbs.) (Others)



HDMI

Input

IN1 (BD/DVD, 4K), IN2 (CBL/SAT, 4K), IN3 (STB/DVR, 4K, HDCP2.2), IN4

(GAME, 4K), IN5 (PC), IN6, AUX INPUT (HDMI/MHL) (front)

Output

OUT MAIN (ARC, HDCP2.2), OUT SUB

Video Resolution

Pass through: 4K 60 Hz (YCbCr 4:2:0)

Upscaling: 4K 30 Hz

Audio Format

DTS-HD Master Audio, DTS-HD High Resolution Audio, Dolby TrueHD,

Dolby Digital Plus, DSD, Multichannel PCM

Supported

3D, Audio Return Channel, DeepColor, x.v.Color, LipSync, CEC (RIHD),

4K (Upscaling and Passthrough)



Video Inputs

Component

IN (CBL/SAT)

Composite

IN1 (CBL/SAT), IN2 (STB/DVR), IN3 (GAME)



Video Outputs

Component

OUT

Composite

MONITOR OUT



Audio Inputs

Digital

OPTICAL (TV/CD)

COAXIAL 1 (BD/DVD), 2 (CBL/SAT)

Analog

BD/DVD, CBL/SAT, STB/DVR, GAME, PC, TV/CD, PHONO



Audio Outputs

Analog

ZONE2 LINE OUT

2 SUBWOOFER PRE OUT

Speaker Outputs

FRONT L/ R, CENTER, SURROUND L/R, BACK or HEIGHT L/R, ZONE2

L/R

Phones

PHONES (Front, ø 6.3)



Others

Setup Mic 1 (Front)

RI 1

USB 1 (Front)

Ethernet 1

Specifications and features are subject to change without notice.

Others

License and Trademark Information

Manufactured under license from Dolby Laboratories. Dolby, Pro Logic and the

double-D symbol are trademarks of Dolby Laboratories.

For DTS patents, see http://patents.dts.com. Manufactured under license from

DTS Licensing Limited. DTS, DTS-HD, the Symbol, & DTS and the Symbol

together are registered trademarks, and DTS-HD Master Audio is a trademark

Qdeo and QuietVideo are trademarks of Marvell or its affiliates.

“CINEMA FILTER” and “CINEMA FILTER (logo)” are trademarks of Onkyo

Corporation.

AccuEQ, Music Optimizer, RIHD and WRAT are trademarks of Onkyo

Corporation.

“RIHD” and “RIHD (logo)” are trademarks of Onkyo Corporation.

The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI

Logo are trademarks or registered trademarks of HDMI Licensing LLC in the

United States and other countries.

The Wi-Fi CERTIFIED

Logo is a certification mark of the Wi-Fi Alliance.

Wi-Fi certified

logo shows international association certifying interoperability

“Wi-Fi alliance” ensures the product has passed the test for compatibility with

other Wi-Fi certified equipment.

The Bluetooth

word mark and logos are registered trademarks owned by

Bluetooth SIG, Inc. and any use of such marks by Onkyo is under license.

Other trademarks and trade names are those of their respective owners.

Onkyo does not guarantee Bluetooth compatibility between the AV receiver and

all Bluetooth-enabled devices.

For compatibility between the AV receiver and another device with Bluetooth

technology, consult the device’s documentation and dealer. In some countries,

there may be restrictions on using Bluetooth devices. Check with your local

authorities.

“MHL, the MHL Logo, and Mobile High-Definition Link are trademarks or

registered trademarks of MHL LLC in the United States and other counties.”

InstaPrevue and the InstaPrevue logo are trademarks or registered trademarks

of Silicon Image, Inc. in the United States and other countries.

Apple, iPod and iPhone are trademarks of Apple Inc., registered in the U.S. and

other countries.

Apple TV is a trademark of Apple Inc., registered in the U.S. and other

countries.

SIRIUS, XM and all related marks and logos are trademarks of Sirius XM Radio

DLNA

, the DLNA Logo and DLNA CERTIFIED

are trademarks, service

marks, or certification marks of the Digital Living Network Alliance.

This product is protected by certain intellectual property rights of Microsoft. Use

or distribution of such technology outside of this product is prohibited without a

license from Microsoft.

Windows and the Windows logo are trademarks of the Microsoft group of

companies.

QR Code is a registered trademark of DENSO WAVE INCORPORATED.

Safari is a trademark or registered trademark of Apple Computer, Inc. in the

United States and other countries.

“x.v.Color” is a trademark of Sony Corporation.

MPEG Layer-3 audio coding technology licensed from Fraunhofer IIS and

Thomson.

“All other trademarks are the property of their respective owners.”

DISCLAIMER

Through this device you are able to link to other services or websites which

are not under the control of any company which has designed, manufactured

or distributed/have distributed this device, and its affiliates (collectively,

“Company”). We have no control over the nature, content and availability

of those services. The inclusion of any links does not necessarily imply a

recommendation or endorse the views expressed within them.

All information, content and services available through this device belong to

third parties and are protected by copyright, patent, trademark and/or other

intellectual property laws of applicable countries.

The information, content and services provided through this device are for your

personal, noncommercial use only. Any information, content or services may

not be used in any manner other than previously approved by the appropriate

content owner or service provider.

You may not modify, copy, republish, translate, exploit, create derivative works,

upload, post, transmit, sell or distribute in any manner any information, content

or services available through this device, unless expressly permitted by the

appropriate copyright, patent, trademark and/or other intellectual property

owner, including, without limitation, content owner or service provider.

THE CONTENT AND SERVICES AVAILABLE THROUGH THIS DEVICE ARE

PROVIDED “AS IS”.

COMPANY DOES NOT WARRANT INFORMATION, CONTENT OR

SERVICES SO PROVIDED, EITHER EXPRESSLY OR IMPLIEDLY, FOR ANY

PURPOSE.

COMPANY EXPRESSLY DISCLAIMS ANY WARRANTIES, EXPRESS

OR IMPLIED, INCLUDING BUT NOT LIMITED TO, WARRANTIES OF

TITLE, NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A

PARTICULAR PURPOSE.

Company makes no representation or warranty of any kind, express or implied,

about the completeness, accuracy, validity, legality, reliability, suitability or

availability with respect to the information, content or services available through

this device. Company shall not be liable, whether in contract or tort, including

negligence and strict liability, for any direct, indirect, special, incidental or

consequential damages or any other damages arising out of, or in connection

with, any information contained in, or as a result of the use of any content or

service by you or any third party, even if Company has been advised of the

possibility of such damages, nor shall Company be liable for any third party

claims against users of this device or any third party.

In no event shall Company be responsible nor liable for, without limiting the

generality of the foregoing, any interruption or suspension of any information,

content or service available through this device. Company is neither responsible

nor liable for customer service related to the information, content and services

available through this device. Any question or request for service relating to

the information, content or services should be made directly to the appropriate

content owners and services providers.

Precautions

For European Models

Declaration of Conformity

We declare, under our sole responsibility, that

this product complies with the standards:

– Safety

– Limits and methods of measurement of

radio disturbance characteristics

– Limits for harmonic current emissions

– Limitation of voltage changes, voltage

fluctuations and flicker

– RoHS Directive, 2011/65/EU

– Hereby, Onkyo Corporation, declares that this TX-NR636 is in compliance

with the essential requirements and other relevant provisions of Directive

1999/5/EC.

–– С–настоящето,–Onkyo–Corporation,–декларира,–че–TX-NR636–е–в–

съответствие–със–съществените–изисквания–и–другитеприложими–

разпоредби–на–Директива–1999/5/EC.

– OnkyoCorporationtímtoprohlašuje,žeTX-NR636splňujezákladní

požadavkyavšechnapříslušnáustanoveniSměrnice1999/5/ES.

– Undertegnede Onkyo Corporation erklærer herved, at følgende udstyr TX-

NR636 overholder de væsentlige krav og øvrige relevante krav i direktiv

1999/5/EF.

– Hiermit erklärt Onkyo Corporation, dass sich das Gerät TX-NR636 in

Übereinstimmung mit den grundlegenden Anforderungen und den übrigen

einschlägigen Bestimmungen der Richtlinie 1999/5/EG befindet.

– Käesolevaga kinnitab Onkyo Corporation seadme TX-NR636 vastavust

direktiivi 1999/5/EÜ põhinõuetele ja nimetatud direktiivist tulenevatele

teistele asjakohastele sätetele.

–

ΜΕ ΤΗΝ ΠΑΡΟΥΣΑ Ο ΚΑΤΑΣΚΕΥΑΣΤΗΣ Onkyo Corporation ΔΗΛΩΝΕΙ

ΟΤΙ TX-NR636 ΣΥΜΜΟΡΦΩΝΕΤΑΙ ΠΡΟΣ ΤΙΣ ΟΥΣΙΩΔΕΙΣ ΑΠΑΙΤΗΣΕΙΣ

ΚΑΙ ΤΙΣ ΛΟΙΠΕΣ ΣΧΕΤΙΚΕΣ ΔΙΑΤΑΞΕΙΣ ΤΗΣ ΟΔΗΓΙΑΣ 1999/5/ΕΚ

– Por la presente, Onkyo Corporation, declara que este TX-NR636 cumple

con los requisitos esenciales y otras exigencias relevantes de la Directiva

1999/5/EC.

– Par la présente, Onkyo Corporation déclare que l’appareil TX-NR636 est

conforme aux exigences essentielles et aux autres dispositions pertinentes

de la directive 1999/5/CE.

– Con la presente Onkyo Corporation dichiara che questo TX-NR636 è

conforme ai requisiti essenziali ed alle altre disposizioni pertinenti stabilite

dalla direttiva 1999/5/CE.

– AršoOnkyoCorporationdeklarē,kaTX-NR636atbilstDirektīvas1999/5/

EKbūtiskajāmprasībāmuncitiemartosaistītajiemnoteikumiem.

– Šiuo Onkyo Corporation deklaruoja, kad šis TX-NR636 atitinka esminius

reikalavimus ir kitas 1999/5/EB Direktyvos nuostatas.

– A Onkyo Corporation ezzennel kijelenti, hogy a TX-NR636 típusú beren-

dezésteljesítiazalapvetőkövetelményeketésmás1999/5/EKirányelvben

meghatározottvonatkozórendelkezéseket.

– Hierbij verklaart Onkyo Corporation dat het toestel l TX-NR636 in

overeenstemming is met de essentiële eisen en de andere relevante

bepalingen van richtlijn 1999/5/EG.

– NiniejszymOnkyoCorporationdeklarujeżeTX-NR636jestzgodny

zzasadniczymiwymaganiamiiinnymiwłaściwymipostanowieniami

Dyrektywy 1999/5/EC.

– Eu, Onkyo Corporation, declaro que o TX-NR636 cumpre os requisitos

essenciais e outras provisões relevantes da Directiva 1999/5/EC.

– Prinprezenta,OnkyoCorporation,declarăcăaparatulTX-NR636este

înconformitatecucerinţeleesenţialeşicualteprevederipertinenteale

Directivei 1999/5/CE.

– OnkyoCorporationtýmtovyhlasuje,žeTX-NR636aspĺňazákladné

požiadavkyavšetkypríslušnéustanoveniaSmernice1999/5/ES.

– Onkyo Corporation izjavlja, da je ta TX-NR636 v skladu z bistvenimi

zahtevamiindrugimirelevantnimidoločilidirektive1999/5/ES.

– Onkyo Corporation vakuuttaa täten että TX-NR636 tyyppinen laite on

direktiivin 1999/5/EY oleellisten vaatimusten ja sitä koskevien direktiivin

muiden ehtojen mukainen.

– HärmedförklararOnkyoCorporationattdennaTX-NR636följerde

väsentliga kraven och andra relevanta stadgar i Direktiv 1999/5/EC.

– Hér með lýsir Onkyo Corporation því yfir að varan TX-NR636 er í samræmi

viðgrunnkröfurogaðrarkröfursemgerðareruítilskipun1999/5/EC.

– Onkyo Corporation erklærer herved at denne TX-NR636 er i

overensstemmelse med vesentlige krav og andre relevante bestemmelser i

direktiv 1999/5/EC.

– OvimeOnkyoCorporation,potvrđujedajeTX-NR636usuglasnostisa

osnovnim zahtjevima i ostalim relevantnim odredbama Direktive 1999/5/EC.

* 2 9 4 0 1 7 3 9 *

D1402-0

SN 29401739

Kitahama Chuo Bldg, 2-2-22 Kitahama, Chuo-ku,

OSAKA 541-0041, JAPA N

http://www.onkyo.com/

18 Park Way, Upper Saddle River, N.J. 07458, U.S.A.

For Dealer, Service, Order and all other Business Inquiries:

Tel: 201-785-2600 Fax: 201-785-2650

http://www.us.onkyo.com/

For Product Support Team Only:

1-800-229-1687

Liegnitzerstrasse 6, 82194 Groebenzell, GERMANY

Tel: +49-8142-4401-0 Fax: +49-8142-4208-213

http://www.eu.onkyo.com/

Unit 1033, 10/F, Star House, No 3, Salisbury Road,

Tsim Sha Tsui Kowloon, Hong Kong.

Tel: 852-2429-3118 Fax: 852-2428-9039

http://www.hk.onkyo.com/

1301, 555 Tower, No.555 West NanJing Road, Jing’an District,

Shanghai, China 200041,

Tel: 86-21-52131366 Fax: 86-21-52130396

http://www.cn.onkyo.com/

The Americas

China

Europe

Asia, Oceania, Middle East, Africa

Please contact an Onkyo distributor referring to Onkyo

SUPPORT site.

http://www.intl.onkyo.com/support/

The above-mentioned information is subject to change

without prior notice.

Visit the Onkyo web site for the latest update.

(Mainland)

(Hong Kong)

Meridien House, Ground ﬂoor, 69 - 71 Clarendon Road,

Watford, Hertfordshire, WD17 1DS, United Kingdom

Tel: +44 (0)8712-00-19-96 Fax: +44 (0)8712-00-19-95

ONKYO TX-NR636 Manuale utente

Marca: ONKYO

Modello: TX-NR636

Categoria: Ricevitori AV

Tipo: Manuale utente

Scarica PDF

rapporto

in altre lingue

English: ONKYO TX-NR636 User manual

ONKYO TX-NR636 Manuale utente

ONKYO TX-NR636 Manuale utente

in altre lingue

Documenti correlati

Altri documenti