BenQ A31A Manuale utente

Marca: BenQ

Modello: A31A

Categoria: Cellulari

Tipo: Manuale utente

Table of Contents 1

See also Index at the end of this User Guide

right page (1) of A31a FCC us-en (16.02.2006, 13:34)

Template: X75, Version 2.1; VAR Language: am; VAR issue date: 050711

Legal notices ...................................... 2

Safety precautions ............................. 4

Antenna care ...................................6

Phone operation ..............................6

Electronic devices ............................ 7

Overview .......................................... 10

Display symbols ................................ 11

Getting started ................................. 12

Switch on/off, PIN ............................. 13

Emergency number (SOS) ..............13

General instructions ......................... 14

Standard functions ...........................15

Security ............................................15

Codes ............................................15

Calling .............................................. 16

Dialling with number keys .............. 16

End call .........................................16

Set volume .................................... 16

Redial ............................................16

If the number is busy .....................16

Accept call .....................................16

Reject call ...................................... 17

Handsfree ...................................... 17

Swapping between 2 calls .............. 17

Conference ....................................17

Babysitter ...................................... 17

Text entry ......................................... 17

Text entry without T9 ....................17

Special characters ..........................18

Input menu ...................................18

Text entry with T9 ..........................18

Text modules .................................19

Default book ..................................... 20

Phonebook ....................................... 20

<New entry> ..................................20

Call (search for an entry) ................ 20

Change entry .................................20

Address book ....................................21

<New entry> ..................................21

Change entry .................................21

Call (search for an entry) ................ 21

Voice dialing ..................................21

Groups ..........................................21

Records ............................................. 22

Duration/ charges ............................ 22

Voice message/

mailbox ............................................ 23

SMS .................................................. 24

MMS ................................................. 24

Message lists/settings ...................... 25

Ring tones ........................................ 26

Ringer setting ................................ 26

Silent alert ..................................... 26

Volume ......................................... 26

More tones... ................................. 26

Surf & fun ......................................... 27

Internet browser ........................... 27

Games & more .............................. 27

Setup ................................................ 28

Profiles .......................................... 28

Display .......................................... 29

Call setup ...................................... 29

Clock ............................................. 30

Connectivity .................................. 30

Security ......................................... 31

Network ........................................ 32

Accessories ................................... 33

Organizer ......................................... 33

Alarm clock ................................... 33

Calendar ....................................... 33

Appointments ............................... 33

Notes ............................................ 34

Missed alarms ............................... 34

Time zones .................................... 34

Calend. setup ................................ 34

Extras ............................................... 35

Fast access key ................................. 36

Own stuff ......................................... 37

Customer Care ................................. 38

Care and maintenance ..................... 39

Product data ..................................... 40

SAR ................................................. 41

U.S. FDA ........................................... 42

FCC/Industry Canada Notice ............ 46

Intellectual property ........................ 47

Ten Driving Safety Tips .................... 48

End user license agreement ............ 50

Index ................................................ 53

See also In-

dex at the end

of this User

Guide

Table of

Contents

Legal notices2

left page (2) of A31a FCC us-en, (16.02.2006, 13:32)

Template: X75, Version 2.1; VAR Language: am; VAR issue date: 050711

Legal notices

The mobile phone described in this guide is approved for use on the GSM and GPRS net-

works operating on the GSM 850 and 1900 (DCS/PCN) bands. It is approved for use in the

country where it was originally sold and may be approved for use in other countries.

Manufactured by BenQ Mobile GmbH & Co. OHG under trademark license of Siemens AG.

Siemens and the A31a model phone are

trademarks or registered trademarks of

Siemens and/or its affiliates in the United

States and/or other countries.

T9® is a registered trademark of America

Online, Inc. in the United States. Java and

all Java-based trademarks and logos are

trademarks or registered trademarks of

Sun Microsystems, Inc. in the U.S and other

countries. The names of actual companies

and products mentioned herein may be the

trademarks of their respective owners.

Disclaimer

The information contained in the User

Guide is written for the A31a phone.

Siemens reserves the right to make chang-

es and improvements to the products and

any of the features of the products de-

scribed in this document without prior no-

tice. The contents of the user guide are pro-

vided "AS IS". Except as required by

applicable law, no warranties of any kind,

either express or implied, including, but not

limited to, the implied warranties of mer-

chantability and fitness for a particular pur-

pose, are made in relation to the accuracy,

reliability or contents of this document.

Siemens reserves the right to revise the

user guide or withdraw it at any time with-

out prior notice. Under no circumstances

shall Siemens be responsible for any loss of

data or income or any special, incidental,

consequential or indirect damages howso-

ever caused.

Export Information

The mobile phone may be subject to export

regulation of the United States and other

countries. Diversion contrary to law is pro-

hibited. You must comply with all applica-

ble export laws, restrictions and regulations

of the United States foreign agencies or au-

thorities, and may not export, or transfer

for the purpose of re-export, the mobile

phone or any part of the phone in violation

of any applicable restrictions, laws or regu-

lations, or without all necessary approvals.

Network Services

A number of features included in this

guide are called Network Services. They

are special services provided by wireless

service providers. In order to use any of

these Network Services, you must sub-

scribe to these service(s) from your ser-

vice provider and obtain instructions for

their use. Some of these Network Servic-

es may not be available when roaming on

a network other than your home network.

3Legal notices

right page (3) of A31a FCC us-en (16.02.2006, 13:32)

Template: X75, Version 2.1; VAR Language: am; VAR issue date: 050711

Standby and

Talk Time Information

The mobile phone incorporates features

that are new to the mobile phone world.

These may include color displays and

lighting, graphic games, music reproduc-

tion and browsing the Internet. The way

you use the display and the features will

affect the performance of the battery and

how long it lasts between charge cycles.

The quoted standby times and talk times

show the minimum and maximum per-

formance that can be expected from the

battery under normal network conditions

and with the default settings as set by the

factory. However, playing games (particu-

larly with the backlight continuously

switched on) and listening to music will

shorten the time available for standby

and to make and receive telephone calls.

Operation times also vary depending on

network conditions, SIM settings, charg-

ing and battery condition, how you use

your phone and other factors.

Memory

The mobile phone contains an internal

memory device that stores the software

required to operate the mobile phone,

communicate with the GSM/GPRS net-

work and provide the user interface.

Some features in the internal memory

run additional devices and some addition-

al games and utilities. The amount of

memory available in the mobile phone is

finite and may be insufficient to store

large numbers of applications and files.

Warning!

Remember to back up your data and to do so fre-

quently. Always back up all data and programs

before sending the mobile phone in for repair.

Safety precautions4

left page (4) of A31a FCC us-en, (16.02.2006, 13:32)

Template: X75, Version 2.1; VAR Language: am; VAR issue date: 050711

Safety precautions

Information for parents

Please read the operating instructions and safety precautions carefully before use.

Explain the content and the hazards associated with using the phone to your children.

Remember to comply with le-

gal requirements and local re-

strictions when using the

phone. For example in

aeroplanes, petrol stations,

hospitals or while driving.

Cellular phones can interfere

with the functioning of medi-

cal devices such as hearing

aids or pacemakers. Keep at

least 9 inches (20 cm)

between phone and pace-

maker. When using the cell

phone hold it to the ear which

is farthest from the pacemak-

er. For more information con-

sult your doctor.

The ringtone, info tones and

speakerphone talking are re-

produced through the loud-

speaker. Do not hold the

phone to your ear when it

rings or when you have

switched on the speaker-

phone function. Otherwise

you risk serious, permanent

damage to your hearing.

Only use original batteries

(100 % mercury-free) and –

charging devices. Otherwise

you risk serious damage to

health and property. The bat-

tery could explode, for in-

stance.

Do not use a handheld while

driving.

Small parts such as the SIM

card, sealing stop, lens ring

and lens cap can be disman-

tled and swallowed by small

children. The phone must

therefore be stored out of the

reach of small children.

The mains voltage specified

on the power supply unit (V)

must not be exceeded. Other-

wise the charging device may

be destroyed.

The power supply must be

plugged into an easily accessi-

ble AC mains power socket

when charging the battery.

The only way to turn off the

charging device after charg-

ing the battery is to unplug it.

Permanent hearing loss may

occur if you use ear- or head-

phones at high volume.You

can adapt over time to a high-

er volume, which may sound

normal but can be damaging

to your hearing. Set your vol-

ume to a safe level. If you ex-

perience ringing in your ears,

reduce the volume or discon-

tinue use of your system.

5Safety precautions

right page (5) of A31a FCC us-en (16.02.2006, 13:32)

Template: X75, Version 2.1; VAR Language: am; VAR issue date: 050711

Do not look at the LED (e.g. ac-

tivated infrared port, flash LED)

with optical magnifiers be-

cause of the risk of radiation.

This product complies with

IEC/EN 60825-1 2 2Safety of

Laser Products2 for LED

Class 1M products; such prod-

ucts are safe under reason-

ably foresee-able operating

conditions.

Do not place the phone near

to electromagnetic data carri-

ers such as credit cards and

floppy disks. Information

stored on them could be lost.

You may only open the phone

to replace the battery (100 %

mercury-free) or SIM card.

You must not open the bat-

tery under any circumstances.

All other changes to this de-

vice are strictly prohibited and

will invalidate the guarantee.

Important:

Please dispose of unwanted

batteries and phones as per-

mitted by the laws in your

country.

The phone may cause inter-

ference in the vicinity of TV

sets, radios and PCs.

Use only original accessories.

This will avoid potential risks

to health or property and en-

sure compliance with all rele-

vant regulations.

Improper use will invalidate the guaran-

tee! These safety instructions also apply

to original accessories.

Product attributes are subject to chang-

es in technology, design and availability.

BenQ reserves the right to modify prod-

ucts without prior notice.

This cellular phone offers a range of

functions, it can be used in positions

other than the head, such as on the

body. In this case, separation distance of

0.7 cm is required. When a carry case,

belt clip or holder is used for body-worn

operation, it should not contain metal

and should position the device the

above-stated distance from your body.

Safety precautions6

left page (6) of A31a FCC us-en, (16.02.2006, 13:32)

Template: X75, Version 2.1; VAR Language: am; VAR issue date: 050711

Antenna care

Use only the supplied or an approved re-

placement antenna. Unauthorized anten-

nas, modifications, or attachments could

damage the phone and may violate FCC

regulations.

Phone operation

Normal position

Hold the phone as you would any other

telephone with the antenna pointed up

and over your shoulder.

Tips on efficient operation

For your phone to operate most

efficiently:

• Extend your antenna fully

(if applicable).

• Do not touch the antenna unnecessari-

ly when the phone is in use. Contact

with the antenna affects call quality

and may cause the phone to operate at

a higher power level than otherwise

needed.

Driving

Laws pertaining to the use of mobile

phones while driving vary significantly from

state to state and sometimes even from lo-

cality to locality within states. For example,

some areas may allow persons to use their

mobile phones only if they employ a hands-

free device, and some areas may prohibit

the use of cell phones entirely. Accordingly,

BenQ recommends that persons check the

laws for the areas in which they drive or will

be driving. For areas where the use of mo-

bile phones while driving is permitted,

BenQ encourages persons to use their

phones responsibly and to employ hands-

free devices. Also, if using your phone while

driving, please:

• Give full attention to driving – driving

safely is your first responsibility;

• Use hands-free operation, if available;

• Pull off the road and park before mak-

ing or answering a call, if driving condi-

tions so require.

For vehicles equipped with air bags

An air bag inflates with great force. DO NOT

place objects, including either installed or

portable wireless equipment, in the area

over the air bag or in the air bag deploy-

ment area. If in-vehicle wireless equipment

is improperly installed and the air bag in-

flates, serious injury could result.

Important

Read this information before using your

wireless handheld phone.

As this mobile phone is equipped with a

fixed (non-retractable) antenna, some

paragraphs in the text below may not be

applicable.

7Safety precautions

right page (7) of A31a FCC us-en (16.02.2006, 13:32)

Template: X75, Version 2.1; VAR Language: am; VAR issue date: 050711

Electronic devices

Most modern electronic equipment is

shielded from radio frequency (RF) sig-

nals. However, certain electronic equip-

ment may not be shielded against the RF

signals from your wireless phone.

Pacemakers

The Health Industry Manufacturers' Associ-

ation recommends that a minimum separa-

tion of six inches (6") be maintained be-

tween a handheld wireless phone and a

pacemaker to avoid potential interference

with the pacemaker. These recommenda-

tions are consistent with the independent

research by and recommendations of Wire-

less Technology Research.

Persons with pacemakers

• should ALWAYS keep the phone more

than six inches from their pacemaker

when the phone is turned ON;

• should not carry the phone in a breast

pocket;

• should use the ear opposite the pace-

maker to minimize the potential for in-

terference;

• should turn the phone OFF immediate-

ly if there is any reason to suspect that

interference is taking place.

Hearing aids

Some digital wireless phones may

interfere with some hearing aids. In the

event of such interference, you may want

to consult your service provider or your

hearing aid manufacturer to discuss alter-

natives.

Other medical devices

If you use any other personal medical de-

vices, consult the manufacturers of your

devices to determine if they are ade-

quately shielded from external RF energy.

Your physician may be able to assist you

in obtaining this information.

Turn your phone OFF in health care facili-

ties when any regulations posted in these

areas instruct you to do so. Hospitals or

health care facilities may be using equip-

ment that could be sensitive to external

RF energy.

Vehicles

RF signals may affect improperly installed

or inadequately shielded electronic sys-

tems in motor vehicles. Check with the

manufacturer or its representative regard-

ing your vehicle. You should also consult

the manufacturer of any equipment that

has been added to your vehicle.

Posted facilities

Turn your phone OFF in any facility where

posted notices so require.

Airplanes

FCC and Airline Regulations prohibit using

your phone while in the air. Turn your

phone OFF when requested by the airline.

Check and comply with the policy of your

airline regarding the use of your phone

while the airplane is on the ground.

Blasting areas

To avoid interfering with blasting opera-

tions, turn your phone OFF when in a

“blasting area” or in areas posted: “Turn

off two-way radio.” Obey all signs and in-

structions.

Safety precautions8

left page (8) of A31a FCC us-en, (16.02.2006, 13:32)

Template: X75, Version 2.1; VAR Language: am; VAR issue date: 050711

Potentially explosive atmospheres

Turn your phone OFF when in any area

with a potentially explosive atmosphere

and obey all signs and instructions.

Sparks in such areas could cause an ex-

plosion or fire resulting in bodily injury or

even death.

Areas with a potentially explosive atmo-

sphere are often but not always clearly

marked. They include: fueling areas such

as gasoline stations; below deck on boats;

fuel or chemical transfer or storage facili-

ties; vehicles using liquefied petroleum

gas (such as propane or butane); areas

where the air contains chemicals or parti-

cles, such as grain, dust or metal pow-

ders; and any other area where you

would normally be advised to turn off

your vehicle engine.

Emergency calls (SOS)

Your wireless phone can be used to make

emergency calls. You can make an emer-

gency call from the main display screen.

Enter the local emergency number such

as 911 and then press the

key.

This phone, like any wireless phone, oper-

ates using radio signals, wireless and

landline networks, and user-pro-

grammed functions. Because of this, con-

nections in all conditions cannot be guar-

anteed. Therefore, you should never rely

solely on any wireless phone for essential

communications (for example, medical

emergencies). Remember – to make or

receive any calls, the phone must be

switched on and be used in a service area

that has adequate signal strength. Emer-

gency calls might not be possible on all

wireless phone networks or when certain

network services or phone features are in

use. Check with local service providers re-

garding their network features.

Always make certain that your phone is

properly charged before attempting any

emergency calls. If you allow your battery

to discharge, you will be unable to receive

or make calls, including emergency calls.

You must then wait a few minutes after

the charging begins to place any

emergency calls.

When making an emergency call,

remember to give all of the necessary in-

formation as accurately as possible. Re-

member that your wireless phone might

be the only means of communication at

the scene of an accident, therefore you

should not terminate the call until given

permission to do so.

Batteries and Chargers

Only use original batteries (100% mer-

cury-free) and charging devices. Use of

non-original batteries and/or charging

devices may cause explosion resulting in

serious injury and/or property damage.

Use original accessories in order to avoid

possible injury and property damage and

to ensure compliance with applicable

laws and regulations. Improper use invali-

dates the warranty.

9Safety precautions

right page (9) of A31a FCC us-en (16.02.2006, 13:32)

Template: X75, Version 2.1; VAR Language: am; VAR issue date: 050711

Battery safety precautions

To reduce the risk of fire, injury or electric

shock, and to properly dispose of batter-

ies, please read and understand the fol-

lowing instructions. CONTAINS LITHIUM-

ION OR NICKEL-METAL HYDRIDE BATTERY.

BATTERY MUST BE RECYCLED OR DIS-

POSED OF PROPERLY. DO NOT DISPOSE IN

MUNICIPAL WASTE.

1. Only use the batteries specified for use

with this mobile phone.

2. Do not use batteries of different sizes

or from different manufacturers in this

mobile phone.

3. Do not dispose of the battery in a fire; it

may explode. Dispose of used batteries

and phones in accordance with applica-

ble laws and safety regulations. Do not

expose battery to water. Check with

local codes for special disposal

instructions.

4. Do not open or mutilate the battery.

Doing so may cause damage to the

eyes or skin.

5. Exercise care in handling the battery in

order not to short the battery with con-

ducting materials such as rings, brace-

lets, and keys. The battery or conduct-

ing material may overheat and cause

burns or fire.

6. Charge the battery provided with, or

identified for use with, this product

only in accordance with the instruc-

tions and limitations specified in the

User's Guide. Do not attempt to charge

the battery by any means other than

those specified in the User's Guide.

Overview10

left page (10) of A31a FCC us-en, (16.02.2006, 13:34)

Template: X75, Version 2.1; VAR Language: am; VAR issue date: 050711

Overview

Display indicators

Signal strength/GPRS/battery level.

Softkeys

Press the softkey to call up the function

that is displayed as

§Text§ or icon on the

grey fields above the key.

Call key

Dial displayed phone number or name,

accept calls. In standby mode: Display the

last calls.

On/Off/End key

• Switched off: press and hold to

switch on.

• During a conversation or in an

application: press briefly to finish.

• In menus: press briefly to go back a

level. Press and hold to return to

standby mode.

• In standby mode: press and hold to

switch off phone.

5 Navi-key

In lists and menus:

GScroll up and down.

Function call.

Back a menu level.

During a call:

Increase volume.

Decrease volume.

In standby mode:

EVoice control (press and hold), p. 21.

Open Addressbook/Phonebook.

Open menu.

CGPRS info.

Press and hold

• In standby mode: switch on/off all

signal tones (except alarm).

• For incoming calls: only switch off ring

tones.



Press and hold

In standby mode: switch key lock on/off.

Plug socket

For charger, headset.

_ ª g

Service provider

17.01.2006 09:15

NewMMS

11Display symbols

right page (11) of A31a FCC us-en (16.02.2006, 13:32)

Template: X75, Version 2.1; VAR Language: am; VAR issue date: 050711

Display symbols

Display symbols (selection)

Signal strength

Charging

Battery charge level, e.g. 50%

Addressbook/Phonebook

Call records

Surf & fun/Service provider portal

Organizer

]

Messages



Ring tones



Extras

Own stuff

Setup

Call(s) is/are diverted

Ringer off

Short ring (beep) only

Ringtone only, if the caller is stored in

the Addressbook/Phonebook

Alarm set

Alarm clock activated

Keypad locked

Message memory full

No network access

ABC/

Abc/abc

Indicates whether upper or lower-

case letters are active

T9Abc

Text input with T9

Activated and available

Registered



Temporarily interrupted

Internet online

Internet via GPRS online

Internet no network

Auto answer feature on

Organiser symbols (selection)

Memo

Call

Meeting

{

Birthday

Anniversary

Access with left softkey (selection)

…

Message received

MMS notification received

Voice message received



Unanswered call

Depending on the service provider, some of the

symbols shown here may vary from those in the

phone.

Getting started12

left page (12) of A31a FCC us-en, (16.02.2006, 13:34)

Template: X75, Version 2.1; VAR Language: am; VAR issue date: 050711

Getting started

Using the SIM card/battery

Your phone's display is delivered with a

protective film. Remove this film before get-

ting started. The service provider supplies

you with a SIM card on which all the im-

portant data for your account is stored. If

the SIM card is credit card-sized, snap out

the smaller segment and trim any rough

edges.

Press depression

to remove the

cover downwards in the direction of the

arrow

Insert SIM card

and push it fully into

the locating slot (make sure the angled

corner is in the correct position

4).

To remove the SIM card push the card

here

Insert the battery sideways into the

phone

6, then press downwards 7

until it engages.

To remove, press the retaining tab

then lift the battery out.

Place cover on phone and push to the

upper edge, until it clicks into place

Always switch off phone before removing

the battery!

Only 3V and 1.8V SIM cards are support-

ed. Please contact your service provider if

you have an older card.

Charge battery

The battery is not fully charged when de-

livered. Plug charger cable into the bot-

tom of the phone, plug power supply unit

into a mains power socket and charge for

at least two hours. The power supply unit

heats up when used for long periods. This

is normal and not dangerous.

13Switch on/off, PIN

right page (13) of A31a FCC us-en (16.02.2006, 13:34)

Template: X75, Version 2.1; VAR Language: am; VAR issue date: 050711

When charging is in progress h is

displayed.

Charging time

An empty battery is fully charged after

about 2 hours. Charging is only possible

within a temperature range of +5 °C to

+40 °C (+41°F to +104°F). If the tempera-

ture rises/falls 5°C above/below this, i.e

drops to 32°F or rises to 113°F, the charge

symbol flashes a warning. The mains

voltage specified on the power supply

unit must not be exceeded (Operating

time, p. 40).

Charge icon not visible

If the battery has been discharged fully

the charge icon is not immediately visible

when the power supply unit is plugged

in. It will appear after up to two hours. In

this case the battery is fully charged after

3-4 hours.

Only use the power supply unit provided!

Display while in service

Charge level display during operation

(empty - full):

adg.

A beep sounds when the battery is nearly

empty. The charge level of the battery is

only displayed correctly after an uninter-

rupted charging/discharging cycle. You

should therefore not remove the battery un-

necessarily and where possible not termi-

nate the charging process early.

Switch on/off, PIN

Switch on/off

Press and hold the On/Off/End key B to

switch on or off.

Enter PIN

The SIM card can be protected with a

4- to 8-digit PIN.

Enter the PIN using the number keys. The

characters

**** appear to ensure no-

body can read your PIN on the display.

Correct errors with

§Clear§.

Confirm your input with

§OK§. Logging on

to the network will take a few seconds.

Emergency number (SOS)

Only to be used in real emergencies!

By pressing the softkey

§SOS§ you can

make an emergency call on any network

without a SIM card and without entering a

PIN (not available in all countries).

Switching on your phone for the

first time

Time/date

Set the clock to the right time once at

start-up.

Press

§Yes§. First enter the date

(day/month/year), then the time

(24 hours, including seconds). Press

§OK§.

The time and date are updated.

If the battery is removed for longer than

30 seconds, the clock will be reset.

Time zones

Set the time zone for your area.

Select the required time zone from list

with

G. Apply with §Set§.

General instructions14

left page (14) of A31a FCC us-en, (16.02.2006, 13:34)

Template: X75, Version 2.1; VAR Language: am; VAR issue date: 050711

Phonebook or Addressbook

You can choose whether you want to use

the Phonebook on the SIM card or the in-

ternal Addressbook as standard.

You can copy the SIM card Phonebook to

the Addressbook on the phone. Please do

not interrupt this procedure. During this

time do not accept incoming calls. Follow

instructions in the display.

To copy data on the SIM card at a later

time, mark entries (see p. 15) and copy

these with the function Copy to

(Phonebook options menu).

You can change the default book at any

time (p. 20).

Signal strength

Strong reception signal.

^ A weak signal reduces the call

quality and may lead to loss of

the connection. Change your

location.

General instructions

User guide

The following symbols are used to explain

operation:

Enter numbers or letters.

On/Off/End key.

Call key.

Press navigation key on the side

indicated.

§Menu§

Displays a soft-key function.

Function depends on the service

provider, special registration

may be necessary.

Without SIM card

If you switch on the phone without

a SIM card you can still use some phone

functions.

Press

§Menu§. The functions are displayed

(e.g. Emergency, SOS).

Menu control

The steps needed to reach a function

are shown in a condensed form in this user

guide.

E.g. to display call list for missed calls:

Press

§Menu§ ¢

¢ Missed calls ¢ §Selection§.

This comprises the following steps:

Open main menu, select

Z, then select

the function Missed calls. You have to con-

firm with

§Selection§.

Standby mode

Very often function descriptions begin in

standby mode.

The phone is in standby mode and is ready

for use when the name of the service

provider appears on the display.

Press and hold the On/Off/End key

to return to standby mode from any

situation.

15Standard functions

right page (15) of A31a FCC us-en (16.02.2006, 13:34)

Template: X75, Version 2.1; VAR Language: am; VAR issue date: 050711

Standard functions

Option menus

Menu functions are made available in op-

tions menus. A selection of functions that

occur frequently is shown here.

Press

§Options§ to open menu.

Mark mode

With some applications (e.g. Phonebook)

one or more entries in a list can be

marked to perform multiple functions at

once.

Press

§Options§ ¢ Mark text.

Press

§Mark text§ to highlight an unmarked

entry.

Press

§Unmark§ to unmark a highlighted

entry.

Additional highlighting functions:

Security

§Menu§ ¢

¢ Security

¢ Select function.

The phone and SIM card are protected

against misuse by several security codes.

Keep these confidential numbers in a safe

place where you can access them again if

required.

Codes

PIN control

You can stop the PIN prompt being

activated when the phone is switched on,

but you then risk unauthorised use of the

phone.

Press

§Change§. Enter PIN and confirm

with

§OK§.

Change PIN

You can change the PIN to any 4- to 8-dig-

it number you find easier to remember.

Enter current PIN and confirm with

§OK§.

Enter new PIN twice and confirm each

time with

§OK§.

Change PIN2

(Display only if PIN2 is available). Proceed

as with Change PIN.

Edit

Open the entry to edit.

Capacity

Display available capacity.

View

Display entry.

Delete/

Delete all

Delete entry/delete all entries

after confirmation.

New entry

Create new entry.

Send MMS

Send entry as MMS message.

Send via...

Select transmission service and

medium for sending.

Save

Store entry.

Sort

Set sort criteria

(alphabetical, type, time).

Text input

(p. 17)

T9 preferred: Activate/

deactivate T9 input.

Input language: Select

language for text.

Rename

Rename selected entry.

Mark all

Highlight all entries.

Unmark all

Delete highlighting on all

marked entries.

Delete

marked

All selected entries are deleted.

Calling16

left page (16) of A31a FCC us-en, (16.02.2006, 13:34)

Template: X75, Version 2.1; VAR Language: am; VAR issue date: 050711

Change phonecode

You define the phone code (4-8 digits)

when you call up a protected function for

the first time. It is then valid for all phone-

code protected functions. If the wrong

code is entered three times then the

phone will be locked. Contact Customer

Care for instructions on how to unlock

your pone.

Clear SIM card barring

If the PIN is entered incorrectly three

times, the SIM card is barred. Enter the

PUK (MASTER PIN), provided by your serv-

ice provider with the SIM card, according

to instructions. If the PUK (MASTER PIN)

has been lost, please contact your service

provider.

Preventing accidental activation

Even if PIN control is deactivated confir-

mation is required to switch on the

phone.

This prevents the phone from being

switched on accidentally, e. g. when car-

ried in a pocket or whilst you are on an

aircraft.

Press and hold the On/Off/End key

and confirm with

§OK§. The phone

switches on.

Calling

Dialling with number keys

The phone must be switched on (standby

mode). Dial number (always with area

code, if necessary with international dial-

ling code). To dial international dialling

code press and hold

0 until a "+" is dis-

played. Press

§Country§ and select country.

Short press

§Clear§ to clear the last digit, a

long press clears the entire phone

number. To dial press the Call key

End call

Press the End key B briefly. Press this

key even if the person on the other end of

the line has hung up first.

Set volume

Set volume with navigation key

dur-

ing conversation.

If a Car Kit is used, its volume setting will

not affect the usual setting on the phone.

Redial

To redial numbers that were dialled previ-

ously, press the Call Key

A once, pick up

the required phone number from the list

with

G, then press A again.

If the number is busy

Press §Auto dial§ for automatically dialling

the phone number ten times at increas-

ing time intervalls or press

§Call back§ (L)

for phone ringing when the busy number

is free. Press

§Prompt§ and a beep reminds

you to redial the dispayed phone number

after 15 minutes.

Accept call

The phone must be switched on (standby

mode). An incoming call will interrupt

any other use of the phone. Press

§Answer§

Please make sure you have accepted the call

before holding the phone to your ear. This will

avoid damage to your hearing from loud ring

tones!

17Text entry

right page (17) of A31a FCC us-en (16.02.2006, 13:34)

Template: X75, Version 2.1; VAR Language: am; VAR issue date: 050711

A phone number transmitted by the net-

work is displayed or the corresponding

name if it is contained in the Phonebook

(p. 20) or Addressbook (p. 21). A picture

may also appear (settings p. 21).

Reject call

§Reject§ or B press briefly.

Handsfree

You can put the phone aside during a call.

You can then hear the caller via the

loudspeaker.

Activate handsfree function with

§Handsfr.§

and switch on with

§Yes§.

Adjust the volume with

E. Pressing

§Handsfr.§ switches off "handsfree talking".

Always switch off "handsfree talking" before

holding the phone to your ear! This will avoid

damage to your hearing!

Swapping between 2 calls b

Make a new connection during a call with

y§Menu§ ¢ Hold ¢ J(dial a new phone

number). With

y§Menu§

¢ Toggle you can

swap back and forth between both calls.

If you are called during a phone call and

you can hear the "call waiting tone"

(p. 29), you can accept the waiting call

with

§Toggle§,putting the current call on

hold to do so.

Swap back and forth between the calls

see above or end the current call with

and accept the new call with

§Answer§.

Conference b

Call up to 5 parties and link them together

in a conference call. Make a new connec-

tion during a call with

y§Menu§ ¢ Hold

¢ J (dial a new phone number). The

current call is set on hold. With

y§Menu§

¢ Conference you can join the held call

when the connection is established.

Repeat this procedure until all partici-

pants are linked together.

All calls in the conference are ended si-

multaneously when the End key

B is

pressed.

Babysitter

If this is active, only one number can be

dialled.

§Menu§ ¢ m ¢ Security ¢ Babysitter

Press

D and enter phone code. The

phone code (4- to 8-digits) is set by you

and entered at the first security setting.

Please note this code down (see also p. 15)!

Confirm code input with

§OK§. Press

§Change§ and enter number (press · to

select phone number from the Adress-

book p. 21 or Phonebook p. 20). Confirm

"On" with

§OK§.

To dial, press and hold the right softkey.

To switch direct call off, press and hold

.

Enter phone code and confirm with

§OK§.

Press

§Change§ and Confirm Off with §OK§.

Text entry

Text entry without T9

Press number key repeatedly until the re-

quired letter appears. After a brief interval

the cursor will advance. Example:

2 Press once briefly to type the let-

ter a, twice to type b, etc. Press

and hold to write the number.

Ä, ä, 1-9 Umlauts and numbers are dis-

played after the relevant letters.

Text entry18

left page (18) of A31a FCC us-en, (16.02.2006, 13:34)

Template: X75, Version 2.1; VAR Language: am; VAR issue date: 050711

§Clear§ Press briefly to delete the letter

before the cursor, press and hold

to erase the whole word.

Move the cursor

(forwards/back).

 Press briefly: Swap between abc,

Abc,

abc,

Abc,

ABC, 123.

Status shown in top line of

display.

Press and hold: All inputvariants

are displayed.

* Press briefly: Special characters

are shown.

Press and hold: Open input

menu.

0 Press once/repeatedly:

. , ? ! ’ " 0 - ( ) @ / : _

Press and hold: Writes

Writes blank. Press twice = jumps

a line.

Special characters

Press * briefly. The character map is

displayed:

1) Line break

Navigate to characters with

G,H and

press

§Selection§.

Input menu

Press and hold * with text input. The input

menu ist displayed:

Text format (SMS only), Input language, Mark

text, Copy/Add

Text entry with T9

"T9" deduces the correct word from the

individual key entries by making compari-

sons with an extensive dictionary.

Activate, deactivate T9

§Menu§ ¢ ] ¢ Message setup ¢ T9

preferred

¢ §Change§ (activate/deactivate

T9).

Select Input language

Select the language in which you want to

compose your message.

§Menu§ ¢ ] ¢ Message setup ¢ Input

language

¢ §Selection§ (the new language

is set).

Languages with T9 support are marked

with the T9 symbol.

Write a word using T9

Since the display changes as you proceed,

it is best if you finish a word without look-

ing at the display.

Simply press the keys once only where the

relevant letter is located. For "hotel", for

example:

Press briefly

 for

Abc then

46835and 1 (the blank ends a

word).

Do not use special characters such as Ä

but rather use the standard characters,

e.g. A; T9 will do the rest for you.

Additional information

Set a full stop. A word is conclud-

ed if it is followed by a space.

Within a word, a full stop repre-

sents an apostrophe or hyphen:

e.g.

§provider.s§ = provider’s.

Go to the right. Ends a word.

¿¡_;.,?!+

-"’:

*/()

¤¥

€@\ &#[ ] {

} %~<=>| ^§ Γ

∆ Θ Λ Ξ Π Σ Φ Ψ Ω

19Text entry

right page (19) of A31a FCC us-en (16.02.2006, 13:34)

Template: X75, Version 2.1; VAR Language: am; VAR issue date: 050711



Press briefly: Swap between: abc,

Abc, T9abc, T9Abc, 123. Status

shown in top line of display.

Press and hold: All input modes

are displayed.

Press briefly: Select special

characters (p. 18).

Press and hold: Open input menu

T9 word suggestions

If several options are found in

the dictionary for a key sequence

(a word), the most probable is displayed

first. If the word you want has not been

recognised, the next suggestion from T9

may be correct.

The word must be

§highlighted§. Then press

». The displayed word is replaced

with a different word. If this word is also

incorrect, repeat until the correct word is

displayed.

To add a word to the dictionary, select

§Learn§. Now write the word without T9-

support and accept with

§Save§ into the

dictionary.

Correct a word

Words written with T9:

With

H move left or right, word

by word, until the required word is

§highlighted§.

With

» scroll through the T9 word

suggestions again.

§Clear§ deletes the char-

acter to the left of the cursor and displays

a new possible word!

Words not written with T9:

With

H move letter by letter to the

left/right.

§Clear§ deletes the letter to the

left of the cursor. New characters are

inserted at the cursor position.

Text modules

Text modules can be stored in the phone

for adding to your messages (SMS, MMS).

Write text modules

§Menu§ ¢

]

¢ Text modules ¢ <New

entry>

(write text module)

¢ §Save§ (Accept the default name or give

it a new name, then save with

§OK§)

Use text modules

(write message text) ¢ §Options§

¢ Text modules ¢ G (select text mod-

ule from the list)

(confirm Text

module)

¢ §OK§.

The predefined text is inserted into the

text to the left of the cursor.

Text Input is licensed under one or more of

the following: U.S. Pat. Nos. 5,187,480,

5,818,437, 5,945,928, 5,953,541, 6,011,554,

6,286,064, 6,307,548, 6,307,549, 6,636,162 and

6,646,573; Australian Pat. Nos. 727539, 746674,

and 747901; Canadian Pat. Nos. 1,331,057,

2,302,595 and 2,227,904; Japan Pat. No.

3532780, 3492981; United Kingdom Pat. No.

2238414B; Hong Kong Standard Pat. No.

HK1010924; Republic of Singapore Pat. No.

51383, 66959, and 71979; European Pat. Nos.

0 842 463 (96927260.8), 1 010 057 (98903671.0),

1 018 069 (98950708.2); Republic of Korea Pat.

Nos. KR201211B1 and KR226206B1. People's

Republic of China Pat. Application Nos.

98802801.8, 98809472.X and 96196739.0;

Mexico Pat. No. 208141; Russian Federation Pat.

No. 2206118; and additional patents are pending

worldwide.

Default book20

left page (20) of A31a FCC us-en, (16.02.2006, 13:34)

Template: X75, Version 2.1; VAR Language: am; VAR issue date: 050711

Default book

§Menu§ ¢ è ¢ Select function.

Show entries

Entries in the standard directory (Address-

book or Phonebook) are shown for

selection.

Select a name by entering the first letter

J and/or scroll G. To dial press the

Call key

Create new entry in standard directory.

Phonebook, Address book (see below).

Default book

Select the Phonebook (only one phone

number possible per entry) or the Ad-

dressbook as your standard directory (de-

fault book). Your preference should be for

the Addressbook, because more entries

and functions (e.g. pictures, birthdays,

several phone numbers per entry, etc.)

are possible.

¢ Phonebook/Address book ¢

(set as standard)

Groups

(see p. 21)

Business card

Create your own business card. Send it as

an SMS/MMS to another GSM-phone.

If no business card has been created yet,

you will be asked for your input.

G Move from field to field to put in

your details. Press

§Save§.

Information numbers

Information numbers are stored here in

accordance with the respective service

provider.

Phonebook

Entries in the Phonebook (on the SIM

card) are managed separately from those

in the Addressbook. You can, however,

exchange data between the Phonebook

and the Addressbook.

If the Phonebook is set as standard:

Open Phonebook (in standby mode)

¢ <New entry> ¢ Select entry field

(The maximum number of characters

available is displayed at the top of the

screen)

Number: Always enter phone number with

dialling code.

Name: Enter first and/or last names.

Group: Phone numbers may be assigned

to the VIP group.

Location Select the storage location SIM or

SIM protected (PIN2 required).

Record no.: Is automatically assigned to

the entry.

Press

§Save§ to store the new entry.

Call (search for an entry)

Open phonebook F, select name and

and press the Call key

Change entry

¢ Select entry ¢

¢ Change

¢ Make changes ¢ §Save§.

<Own numbrs>: enter personal phone

numbers, <VIP numbers>: assign important

numbers to group, <SIM phonebook>,

<Protected SIM>, <Info numbers>.

La pagina sta caricando ...

BenQ A31A Manuale utente

Marca: BenQ

Modello: A31A

Categoria: Cellulari

Tipo: Manuale utente

Scarica il pdf

rapporto

in altre lingue

English: BenQ A31A User manual

BenQ A31A Manuale utente

BenQ A31A Manuale utente

in altre lingue

Documenti correlati

Altri documenti