AVer M11-8MV Manuale utente

M11-8MV

Instruction Manual ।

安裝指南

取扱説明書

। Bedienungsanleitung

Manuel d’instructions । Manual de instrucciones

Manuale di istruzioni

English……..……………………………………………..…............1

繁體中文....…………………………………………………...….......28

日本語…..……………………………..……………………....…......55

Deutsch.......................................................................................83

Français………………………………………………..……...........110

Español...……………………………………………..….............138

Italiano..........…………………………….….…………….....….....166

English-1

Package Contents

The items below are included with this product. If any item is missing, contact the

dealer from whom you purchased this product.

M11-8MV Unit USB Cable QR Code Card

Warranty Card*

* Only for Europe, Japan, and Taiwan

Optional Accessories

Carrying Bag Anti-glare Sheet

English-2

Overview

Camera Head

LED Lighting

Arm

Built-in MIC

Functional

Buttons

Status Indicator

Stand Base

Micro SD Card Slot

USB Port

Mini USB/Power Port

VGA Out Port

HDMI Out Port

Function Buttons

Control Panel

Button

Function

 Lamp on/off



Press and hold 3 seconds to call out OSD menu.

Zoom in

Zoom out

 Rotate 0/180°

 Press and hold 3 seconds to freeze the screen. To un-freeze,

press and hold 3 seconds again.

 Auto focus

 Press and hold 3 seconds to start recording.

To stop recording, press and hold 3 seconds again.

Power on/off

English-3

OSD Mode

Button

Function

 Back to last menu level page

 Exit from OSD menu

Up (selection item)

Down (selection item)

Selection enter

English-4

Compound Key

Press keys to operate the compound key function.

Button Function

+ Back to factory default settings

+ Capture image

[Note] For Recording and Capture, please change to “Power Supply Only”

mode.

LED Indicator

Power Solid green: Power on

Solid red: Standby

Flashing red: The camera is in start-up process.

English-5

Device Connection

Power Connection to Wall Outlet

Plug in power and turn on M11-8MV.

Wall Outlet

USB Power adapter

(Not included)

USB cable

[Note]

 Use the USB cable included in the package to connect to mini USB/

Power port of M11-8MV with USB power adapter (not included) to

wall outlet.

 User needs to purchase a 5V/1A USB power adapter (not included)

to connect the USB cable to wall outlet.

 When the camera is start-up, the power indicator is in flashing red.

1

English-6

Power Connection to PC/Laptop

Connect to USB port of PC/laptop for power supply.

USB cable

[Note]

 Use the USB cable included in the package to connect to mini

USB/ Power port of M11-8MV with laptop/PC.

 When the camera is start-up, the power indicator is in flashing

red.

 USB power requirement of M11-8MV is USB 5V/1A.

 For Storage, Format, Capture, Recording and Playback functions,

please change to “Power Supply Only” mode

1

English-7

HDMI Connection

VGA Connection

1 Connect M11-8MV to HDMI display with HDMI output port.

HDMI cable

(Not included)

Wall Outlet

USB Power adapter

(Not included)

USB cable

1 Connect M11-8MV to VGA display with VGA output port.

LCD monitor LCD/DLP projector

Wall Outlet

USB Power adapter

(Not included)

USB cable

VGA cable

(Not included)

English-8

USB Connection

Insert a Micro SD Card

Connect USB flash drive to USB port to save the capture and

recording file.

[Note] The supported USB flash drive maximum is 32G (FAT32).

1 Insert the card to micro SD card slot.

[Note]

 Micro SD card can store capture images and recording files.

 The supported micro SD card capacity maximum is 32G (FAT32).

1

English-9

Operate the Camera with AVerTouch

1 Connect the camera to PC/laptop and Install the AVerTouch

application.

AVerTouch

USB cable

AVerTouch

[Note]

 Download AVerTouch application at:

https://www.aver.com/download-center/

 Please set the camera to USB mode. Go to OSD menu >

SETTING > USB to PC > USB Camera.

2 Open AVerTouch application, click to connect the camera.

English-10

Presentation Mode (Live)

[Note] Before using annotation feature or PIP/PBP function of presentation

mode, set the camera to Power Supply Only mode first. Go to OSD menu >

SETTING > USB to PC > Power Supply Only.

Annotation

In single image live (preview) mode, user can use the annotation feature to

overlay straight line or freeform line on the captured image with the USB mouse

connected to the USB port of M11-8MV.

1. Connect the mouse to USB port of M11-8MV.

2. Go to OSD menu > PRESENTATION > Annotation.

English-11

3. In live screen, right-click mouse to call out annotation bar.

Annotation bar description

Button Function

Color Palette

Select the line color.

Line Thickness

Select the thickness of the line.

Line Select a straight line, freehand or sharp to draw.

Capture Capture the image with the annotation and save it

as a new file.

Eraser Select to erase any part of the annotation that it

comes in contact with or delete all annotation.

Delete Clear all annotation on the screen.

Back Exit annotation bar.

English-12

PIP Function

Select the thumbnail playback screen location and show the thumbnail playback

screen at the corner of the screen to recall the captured image from the SD card.

1. In camera mode, press and hold button for 3 seconds to call out OSD

menu.

2. Use and buttons to move to PRESENTATION > PIP. Press

to confirm the selection.

3. Select the display location of thumbnail playback screen – Upper Left,

Upper Right, Lower Left, or Lower Right. Press to confirm the

selection.

4. The PIP display screen shows as following.

English-13

PBP Function

Select the captured image location and show the capture image on the screen to

recall the captured image from the SD card.

1. In camera mode, press and hold button for 3 seconds to call out OSD

menu.

2. Use and buttons to move to PRESENTATION > PBP. Press

to confirm the selection.

3. Select the display location of thumbnail playback screen – Upper Left,

Upper Right, Lower Left, or Lower Right. Press to confirm the

selection.

4. Use and buttons to select the captured image from the list

English-14

5. The PBP display screen shows as following (PBP is down location). Use

and buttons to move the captured image up and down to view.

Live view

Captured image

English-15

Playback Mode

View the capture images and recording files.

Switch to Playback Mode

1. In camera mode, press and hold button for 3 seconds to call out

OSD menu.

2. Use and buttons to move to SETTING > USB to PC >

Power Supply Only.

3. Use , and buttons to

move to PL AY B A C K selection.

4. Then, press to confirm the

selection and switch to playback

mode.

5. In Playback mode, use +

and + buttons to

select image or video to view

manually. To play a video, press

button to start playback.

To pause playback, press

button again. Press to stop

playback.

English-16

OSD Menu Buttons

Button

Function

Back to last menu level page

Up (selection item)

Down (selection item)

Selection enter

Playback Menu Buttons

Button Function

+

 Image / video selection

 + : Fast forward while playback video

 + : Fast rewind while playback video

Zoom in image

Zoom out image

 Play video

 Press and hold to pause while video is playback

Stop play video

Slide Show

To automatically play all capture

images and recorded videos; but

videos only display files and will not

play video contents.

English-17

Interval

Set the interval before displaying the

next picture. The length can be set up

to 120 sec.

Storage

Select the source of the images and

videos.

Delete File

Permanently delete the image or video

in selected. A Warning Message will

appear. Select Yes to continue and No

to cancel the deletion.

Delete All

Permanently delete all the data in

selected memory source. A Warning

Message will appear. Select Yes to

continue and No to cancel the deletion.

English-18

Annotation

In single image playback mode, user can use the annotation feature to overlay

straight line or freeform line on the captured image with the USB mouse

connected to the USB port of M11-8MV.

[Note] Annotation function is not supported with video file.

1. Connect the mouse to USB port of M11-8MV.

2. Press to call out OSD menu.

3. Select “Playback”.

4. Select the image and playback tool bar is displayed. Or right-click mouse to

call out playback tool bar.

La pagina si sta caricando...

AVer M11-8MV Manuale utente

AVer M11-8MV Manuale utente

in altre lingue

Documenti correlati

Altri documenti