Sinji Smart Air Purifier UV Manuale utente

User manual

SMART AIR

PURIFIER UV

3

1. WHAT’S IN THE BOX

Filter Remote

Control

Machine

4

2. PRODUCT OVERVIEW

5

3. QUICK START GUIDE

1.

Take the unit out

of the plastic bag

5.

Aluminum pre-ﬁlter

2.

Open the front

cover

6.

Re-install the

front cover

3.

Take the ﬁller out

of the plastic bag

7.

Plug-in to power

4.

Insert the 4-in-1

ﬁlter

8.

Press: on/off

Note: The puriﬁer

will not turn on if

the front cover is

not fully closed.

6

4. WARNINGS

Prohibition of use in high temperature and high humidity (like bathroom)

or places with high water moisture. Otherwise, it can be a cause of leak-

age, electric shock, ﬁre, and etc.

Do not operate the machine in places with ﬂammable sources

Take extra care when handling the power cord plug.

Otherwise, it can easy damage the power cord/plug, that may cause

short circuit to trigger a ﬁre, electric shock, etc.

Close the doors and windows in order to purify the air efﬁciently and

quickly.

If the power cord is damaged, in order to avoid danger, replacement of

parts or repair must be done by professional personnel only.

Prohibition of use in places with fumes (For example: kitchen)

Prohibition of use in high temperature and high humidity (like bathroom)

or places with high water moisture.

Unplug the power supply as soon as any of the following occurs :

• If any of the switches don´t work

• If any power supply is short-circuited

• If the power cord or plug is abnormally hot

• If there´s a burning smell or abnormal sound and vibration.

• If there are any other anomalies or failures.

7

5. OPERATION INSTRUCTIONS

On/off

Press the “on/off” button of the remote control or the blinking “on/off” icon on the

puriﬁer to turn the device on.

Auto

If the “auto” lights are ﬂickering, the intelligent system will automatically engage

the puriﬁer according to the current air quality. If the indicator is green, the air will

be puriﬁed at low fan speed. When the air quality is medium, the indicator light will

show yellow.

Sleep mode

When in Sleep Mode, only the “Sleep” light will be visible, while other lights will

automatically be switched off by the machine. In this mode the machine will work

at its lowest fan speed. Pressing the “Sleep” or the “Auto” button again.

Timer

This is a good feature to help users to set a speciﬁc running time for the machine,

before it automatically turns to standby mode. The operating time of the puriﬁer is

24 hours if timer is not set.

8

Speed

Wind speed; wind speed is divided into three speeds. There is a corresponding

wind speed icon on the control panel.

Anion

In the power-on state, soft touch the “Anion” key and the on-screen “Anion” light

will ﬂicker. Flickering key means it is active.

Child lock

In the power-on state, touch “Child lock” for 3 seconds to activate. Touch it again

for 3 seconds to Unlock.

UV

In the power-on state, touch “UV” to activate and its light will ﬂicker. Touching it

again will turn it off.

Reset

If it works more than 4000 hours, the “Filter” light will ﬂicker as a reminder to

replace a new ﬁlter. After installing a new ﬁlter, press the “Reset” kig for 5 seconds.

Then the ﬂickering “Filter” light will be dissapear.

Filter installation sequence:

1. Pre-ﬁlter

2. HEPA, Carbon

Replacement procedures:

1. Open the front cover

2. Take out of the old ﬁlters

3. Install the new Filters in sequence

4. Press the speed button + timer.

5. Close the upper cover to complete the replacement

9

6. PURIFICATION FUNCTIONS

1. Pre - ﬁlter

This Pre ﬁlter has 3 parts: Aluminum Net, Sponge, Aluminum Net. They can re-

moves large particles such as dust hair dandruff etc.

2. HEPA Filter

HEPA means High Efﬁciency Particulate Air Filter, it is one of the most import ﬁlter

in air puriﬁer. It can effectively ﬁlter smoke, dust, pet dander, PM2.5 particles and

other particles harmful to the human body. For 0.3 micron particles, the ﬁltration

accuracy reaches 95%-99.95%.

3. Carbon Filter

The activate carbon effectively absorb organic matter, effectively remove odor,

remove volatile organic compounds such as formaldehyde, toluene, hydrogen

sulﬁde, chlorobenzene and air pollutants.

4. Photo-catalyst Filter

The Photo-catalyst ﬁlter can effectively degrade toxic and harmful gases such as

formaldehyde in the air, and purify the air efﬁciently. At the same time, it can effec-

tively kill a variety of bacteria, and can decompose and harmlessly treat the toxins

released by bacteria or fungi.

5. Negative ion

Negative ions can optimize the air, reduce the harm of PM2.5 to the human body,

and clean indoor decoration pollution. Invigorate the spirit, eliminate fatigue, im-

prove sleep and increase appetite.

6. UV lamp

This Machine use UVC type ultraviolet sterilizing lamp. Wavelength 253.7nm, also

known as short-wave sterilization ultraviolet. Although the penetrating ability is

weak, it is very harmful to the human body, and it shouldn’t be directly exposed to

the human body. Please keep away from UV lamp when it is working.

10

7. WORKING PRINCIPLE

11

8. CONNECT TO TUYA APP

1. Scan the QR code to download “Tuya” app

2. Touch the on/off button off the machine to start the machine. Then touch the

speed button for 35 seconds. When you hear a buzzer sound, you can release

your hand. At this time, the indicator light of the WiFi button ﬂashes (a stable

signal the device should router)

3. Find the installed APP icon, click Open and register.

4. After completing the password setting, you will enter the following page, click

“Add device”, select small appliances, air puriﬁer and enter the machine dis-

tributing network page.

5. The phone displays the following interface, please click “Conﬁrmation light is

blinking” to enter your WLAN account and Enter the password, and then click

“Finish” to enter the network conﬁguration page.

6. After successful network conﬁguration, click “Finish” main page of

device operation

12

9. SPECIFICATIONS

10. MAINTENANCE

Machine:

This machine is equipped with a negative ion generator; used to absorb dust, so

please regularly use a soft & clean cloth with some water containing detergent.

Filter:

The ﬁlter replacement is advised by the built-in intelligent program. If the air is pol-

luted, the ﬁlters will need to be replaced earlier, and the ﬁlters can be purchased

at the designated distributor. UV lamp: The service life of the internal UV lamp is

typically 24 months. To replace the UV Lamp the unit must be disconnected from

its power supply. Remove the UV lamp by turning 90 degrees and ﬁt its replace-

ment. Please note that the UV Lamp is critical to the efﬁciency of this machine’s de

contamination capacity. UVC spectrum lamps are essential to efﬁciently eradi-

cate viral and bacterial pathogens.

Smart Air Puriﬁer UV

220V/110V (optional)

5060 Hz

65W

4W

254nm (UVC)

8000 hours

< 66db

Up to 70m2

6.7 kg

370*215*645mm

415*255*695mm

Pruduct name

Rated voltage

Rated Frequency

Power rating

UV Power

UV Wavelength

UV Life

Rated noise

CADR

Net Weight

Product Size

Package Size

13

11. TROUBLESHOOTING

When this occurs, please conﬁrm the following items before sending them to repair.

Is the power plug disconnected?

Plug-in the power cord

Is the front panel/cover properly

installed?

Re-install the front panel/cover.

The machine was placed on sloped area?

Place the machine on ﬂat surface.

Air quality sensors may be exposed to water

vapor; fumes, and sprays.

Move the machine to another clean environ-

ment and test again.

Remove the sensor door and wipe the sen-

sor lens with a clean damp-moist soft cloth.

Check the ﬁlters. Heavy build-up of

pollutants can make the ﬁlter ineffective.

Try removing the ﬁlter and normally dry

without sunlight. If there is no improvement,

please replace with new ﬁlter.

No power in the machine

During automatic operation, air

quality indicator shows red or

pm2.5 data is getting higher

It is difﬁcult to get rid of the odor

14

Filter Is not working?

Clean the pre/ﬁlter

If the situation has not improved, please

replace with new 4in1 ﬁlter.

Machine placed in a not suitable area to

remove the pollutants?

Change the machine´s location, or change

fan speed to its highest setting.

Q1: Control panel does not turn on.

Al: Please check that there’s a power supply: power cord is plugged-in; or the

front cover is properly closed.

Q2: Filter LED is blinking?

A2: Filter has reached its usage cycle. Replace with new ﬁlter

Q3 Why is the operational noise is getting louder?

A3: The ﬁlter has accumulated too much dust. Clean the pre-ﬁlter or the ﬁlter.

Q4: Why I cannot turn-on the machine, but there’s a bell sound during power

plug-in?

A4: Check to see if the front panel is properly installed. The device was built will

sensor that if there’s no front cover or if it isn’t not properly installed, the puriﬁer

will be disabled.

It is difﬁcult to clear the air

pollution.

The indoor air is polluted, but

machine does not work at the

highest speed

15

Q5: Why is the indoor air pollution concentration is high?

A5: Check whether doors and windows are open. Check also whether there are

sources of pollution released.

Q6 Why is it that after using the machine for a long period of time, the air vol-

ume is decreasing?

A6: Machine may be used with high-density dust concentration causing the ﬁlters

to reach its limit. Clean the pre-ﬁlter or replace the 4in1 ﬁlter.

Q7: Can the 4in1 ﬁlter be cleaned?

A7: No. The 4in1 ﬁlter is disposable

Q8: What is the lifespan of the ﬁlter?

A8: Under normal indoor environment, the ﬁlter can be used for 8 to 12 months.

Usage in a highly polluted environment will shorten the life of the ﬁlter.

Q9. Where can I buy the replacement ﬁlters?

A9: Contact your dealer or the authorized distributor to purchase a new ﬁlter.

12. SUPPORT

For any aster sales support, contact us via [email protected],

or visit our website www.sinjiproducts.com.

1. CE QU’IL Y A DANS LA BOÎTE

Filtre

Télécommande

Machine

Pré-ﬁltre

HEPA, carbone, coton antibactérien, photocatalyseur

2. APERÇU DU PRODUIT

Bouton

tactile

Panneau

Écran

Capteur

Indicateur

de qualité

de l’air,

Bouton

tactile

Capteur

HEPA, coton antibactérien au carbone

Pré-ﬁltre en aluminium.

Poignée Poignée

Capteur

Aimant

Évent

Micro interrupteur

3. GUIDE DE DÉMARRAGE RAPIDE

1.

Sortez l’appareil du

sac en plastique

5.

Pré-ﬁltre en

aluminium

2.

Ouvrez le

couvercle avant

6.

Réinstaller le

couvercle avant

3.

Sortez le produit de

remplissage du sac en

plastique

7.

Branchement sur

le secteur

4.

Insérez le ﬁltre 4

en 1

8.

Appuyez sur : on/

off

Remarque : Le

puriﬁcateur ne

se mettra pas

en marche si

le couvercle

avant n’est pas

complètement

fermé.

4. AVERTISSEMENTS

Interdiction d’utiliser le produit dans des endroits où la température et

l’humidité sont élevées (comme la salle de bain) ou dans des endroits où

l’humidité de l’eau est élevée. Sinon, cela peut être une cause de fuite,

de choc électrique, d’incendie, etc.

Ne pas utiliser la machine dans des endroits où se trouvent des sources

inﬂammables.

Faites très attention lorsque vous manipulez la ﬁche du cordon

d’alimentation. Sinon, vous risquez d’endommager facilement le

cordon/la ﬁche d’alimentation, ce qui peut provoquer un court-circuit et

déclencher un incendie, une électrocution, etc.

Fermez les portes et les fenêtres aﬁn de puriﬁer l’air efﬁcacement et

rapidement.

Si le cordon d’alimentation est endommagé, aﬁn d’éviter tout danger, le

remplacement des pièces ou la réparation doivent être effectués par du

personnel professionnel uniquement.

Interdiction d’utiliser l’appareil dans des endroits où il y a des fumées

(par exemple, la cuisine).

Interdiction d’utiliser l’appareil dans des endroits où la température et

l’humidité sont élevées (comme la salle de bain) ou dans des endroits où

l’humidité de l’eau est élevée.

Débranchez l’alimentation électrique dès que l’un des cas suivants se

présente :

• Si l’un des interrupteurs ne fonctionne pas

5. INSTRUCTIONS DE FONCTIONNEMENT

Marche/arrêt

Appuyez sur le bouton “on/off” de la télécommande ou sur l’icône clignotante “on/

off” du puriﬁcateur pour mettre l’appareil en marche.

Auto

Si les voyants “auto” clignotent, le système intelligent enclenchera

automatiquement le puriﬁcateur en fonction de la qualité actuelle de l’air. Si le

voyant est vert, l’air sera puriﬁé à faible vitesse du ventilateur. Lorsque la qualité de

l’air est moyenne, le voyant est jaune.

Mode veille

En mode veille, seul le voyant “Sleep” sera visible, tandis que les autres voyants

seront automatiquement éteints par la machine. Dans ce mode, la machine

fonctionnera à sa vitesse de ventilation la plus faible. Appuyez à nouveau sur le

bouton “Sleep” ou “Auto”.

• Si l’une des alimentations est court-circuitée

• Si le cordon ou la ﬁche d’alimentation est anormalement chaud

• S’il y a une odeur de brûlé ou un son et une vibration anormaux

• S’il y a d’autres anomalies ou défaillances

La pagina sta caricando ...

Sinji Smart Air Purifier UV Manuale utente

Sinji Smart Air Purifier UV Manuale utente

in altre lingue

Altri documenti