dBTechnologies A4TI Manuale utente
- Categoria
- Attrezzatura musicale
- Tipo
- Manuale utente
420120319Q REV. 1.4
a4ti
QUICKSTART USER MANUAL
Section 1
ON ON
ON ON
SIGNAL SIGNAL
SIGNAL SIGNAL
LIMITER LIMITER
LIMITER LIMITER
PR PR
OO
TECT TECT
PR PR
OO
TECT TECT
-20dB -20dB
-20dB -20dB
-10dB -10dB
-10dB -10dB
-5dB -5dB
-5dB -5dB
CH1
CH2
CH3 CH4
SIGNAL SIGNAL
PRO FESS ION AL
4C H POWER
AMPL I FI ER
0dB 0dB 0dB 0dB
0
0
0
0
0
0
0
0
----
The warnings in this manual must be observed together with the "USER MANUAL - Section 2".
Le avvertenze nel presente manuale devono essere osservate congiuntamente al “MANUALE D’USO – Sezione 2”.
Die Warnungen in diesem Handbuch müssen in Verbindung mit der "BEDIENUNGSANLEITUNG - Abschnitt 2"
beobachtet werden”.
Les avertissements speciés dans ce manuel doivent être respectés ainsi que les "CARACTERISTIQUES TECH-
NIQUES -Section 2"
Las advertencias del presente manual se deben tener en cuenta conjuntamente con las del “MANUAL DEL USU-
ARIO” - Sección 2”.
A.E.B. Industriale Srl V ia Brodolini, 8 Località Crespellano 40053 VALSAMOGGIA BOLOGNA (ITALIA)
Tel +39 051 969870 Fax +39 051 969725 www.dbtechnologies.com [email protected]
https://manual-hub.com/
420120319Q REV. 1.4
a4ti
Thank you for choosing a dBTechnologies Product!
A4TI is a powerful 4 channel class D amplier (PFC and SMPS power supply) with 4- poles speakON outputs.
The user can choose between BRIDGE, PARALLEL, or STEREO MODE. A LINK MODE selector increase the
versatility of the use.
The balanced inputs, with sensitivity selector, can be linked to create a more complex ampliers network.
It can cover a wide range of applications, expecially in xed installations.
PACKING CONTENT
• A4TI amplier
• mains cable (VDE connector)
• this quickstart and warranty documentation
REAR PANEL
1. VDE connector with fuse
2. CH1, CH2, CH3, CH4 4-poles speakON outputs
3. Balanced CH3 and CH4 inputs (XLR connector) with Link outputs
4. Balanced CH3 and CH4 inputs (XLR connector) with Link outputs
5. Sensitivity selector for CH3-CH4 inputs
6. LINK MODE selector
7. CH3-CH4 MODE selector
8. Sensitivity selector for CH1-CH2 inputs
9. CH1-CH2 MODE selector
FRONT PANEL
- Lights at the action of all the protection circuits
- Lights when compression/limiter is protecting the amplier
- Lights when the output signal is around -5 dB than full power.
- Lights when the output signal is around -10 dB than full power.
- Lights when the output signal is around -20 dB than full power.
- Lights at the presence of input audio signal
- Lights when the amplier turn on
ON
SIGNAL
LIMITER
PROTECT
-20dB
-10dB
-5dB
CH1 CH2
P R O F E S S I O N A L
2 C H P O W E R
A M P L I F I E R
0dB
0
0
-0dB
0
0
-
10. CH1, CH2, CH3, CH4 level knobs
11. CH1, CH2, CHH3, CH4 meters
12. Power switch
Attention!
Touching uninsulated OUTPUT CHANNELS or bare wiring may result in an unpleasant sensation.
Don’t touch uninsulated OUTPUT CHANNELS or bare wiring when power on.
https://manual-hub.com/
420120319Q REV. 1.4
a4ti
FIRST TURN ON
• Connect the passive loudspeakers, using cables with speakON connectors (2 outputs), depending on
impedance, max rated power, amplier mode, link mode. Select the amplier MODE (7, 9) and LINK
MODE (6).
• Connect the inputs, using balanced cables with XLR connectors (6-7 outputs). Select the inputs
sensitivity.
• If needed, link the input LINK connector, to relaunch the signal to a second amplier.
• Set the level knobs (10) to the minimum level.
• Connect the mains cable (socket 1), turn on the amplier (12).
• Adjust the gain controls (8, 9), while the audio signal comes from your source.
The user can select the input sensitivity, the output mode of the amplier and the link mode.
The input sensitivity can be selected from (0.775 V, 1 V, 32 dB), depending on the charaterisctics of the
source.
The amplier can operate in three different modes:
- brigde
- parallel
- stereo
The LINK MODE (1 in 4 / 2 in 4) increase the possibilities in the usage. All the cases are explained in the
upper referencetable.
INPUT SENSITIVITY / OUTPUT MODE / LINK MODE
https://manual-hub.com/
420120319Q REV. 1.4
a4ti
Type: Class D amplier
Output Power:
8 Ω stereo* 500 W x 4
4 Ω stereo** 750 W x 4
8 Ω bridge** 1500 W x 2
Frequency response: 20 Hz - 20 kHz (+0/-1dB)
Input sensitivity: 0.775 V / 1 V / 32 dB
Product dimensions (mm): 483(w) x 435(d) x 89(h)
Weight: 11 kg
MAIN TECH SPECS
Features, specication and appearance of products are subject to change without notice. dBTechnologies
reserves the right to make changes or improvements in design or manufacturing without assuming any obligation
to change or improve products previously manufactured.
Check the complete user manual on www.dbtechnologies.com for further information about the system and available
accessories.
Scan with your QR reader App to
download the complete user manual.
* The power is tested under the condition of 40ms burst,1kHz sine wave and 1% THD.
** The power is tested under the condition of 20ms burst,1kHz sine wave and 1% THD.
This product is suitable for usage up to an altitude of 2000 m.
https://manual-hub.com/
-
1
-
2
-
3
-
4
dBTechnologies A4TI Manuale utente
- Categoria
- Attrezzatura musicale
- Tipo
- Manuale utente
in altre lingue
- English: dBTechnologies A4TI User manual
- français: dBTechnologies A4TI Manuel utilisateur