HELVIA ZEUS X Series Manuale utente

Marca: HELVIA

Modello: ZEUS X Series

Categoria: Attrezzatura musicale

Tipo: Manuale utente

ZEUS X Series

4-CH Low-Impedance Power Ampliers with Crossover

Amplicatori 4-Canali a Bassa Impedenza con Crossover

Manuale d’uso

en-ita

Please read this manual carefully and keep it for future reference

Leggete questo manuale e conservatelo per future consultazioni

User Manual

Gentile Cliente,

Prima di tutto, grazie per aver acquistato un prodotto HELVIA®. La nostra missio-

ne e di orire soluzioni basate sulle tecnologie più aggiornate a tutte le esigenze

di integrazione di sistemi nei settori privati, commerciali e corporate.

Speriamo che siate soddisfatti da questo prodotto e, qualora vogliate partecipare,

saremmo molto lieti di poter ricevere il vostro feedback sul funzionamento del

prodotto e su possibili miglioramenti da apportare in futuro. Potete andare sulla

sezione CONTATTACI del sito www.frenexport.com e inviare una e-mail con la vo-

stra opinione; questo ci aiuterebbe a realizzare apparecchiature sempre più vicine

alle reali esigenze dei Clienti.

Vi preghiamo, inne, di leggere attentamente questo manuale di istruzioni prima

di utilizzare il prodotto; un uso incorretto potrebbe causare danni a voi e al pro-

dotto stesso: pensateci!

Il team HELVIA

Dear value Customer,

First, thank you for purchasing a HELVIA® product. Our mission is to oer

solutions based on the most up-to-date technologies for all systems integration

needs in the private, commercial and corporate sectors.

We hope you are satised with this product and, if you wish to participate, we

would be very pleased to receive your feedback on the operation of this product

and possible improvements for the future. You can go to “CONTACT” section of

www.frenexport.com and send an e-mail with your opinion; this would help us

make equipment that are closer to the real needs of our customers.

Finally, please read this user manual carefully before using the product; incorrect

use could cause damages to you and the product. Take care!

The HELVIA team

TABLE OF CONTENTS

1. PRECAUTIONS .................................................................................. 4

1.1. Important Safety Symbols................................................................................................ 4

1.2. Important Safety Instructions ......................................................................................... 4

2. GETTING STARTED ........................................................................... 5

2.1. Unpacking ..............................................................................................................................5

3. PRODUCT OVERVIEW ..................................................................... 6

3.1. Main Features: ......................................................................................................................6

4. FRONT PANEL ....................................................................................7

5. REAR PANEL ...................................................................................... 8

6. AUDIO CONNECTIONS .................................................................. 11

7. OPERATION MODES ....................................................................... 11

7.1. STEREO MODE ...................................................................................................................12

7.2. PARALLEL MODE ...............................................................................................................14

7.3. PARALLEL MODE CH3 LINK CH1 .................................................................................15

7.4. BRIDGE MODE .................................................................................................................... 16

7.5. BRIDGE MODE CH3 LINK CH1 ....................................................................................... 17

8. RACK MOUNTING AND DIMENSIONS ...................................... 17

9. SPECIFICATIONS ..............................................................................19

10. WARRANTY AND SERVICE .......................................................... 20

11. WARNING ........................................................................................ 20

ZEUS X Series 4-CH Power Amplifiers with Crossover

1. PRECAUTIONS

1.1. Important Safety Symbols

The above warning is located on the unit

The lightening ash with arrowhead symbol within an equi-

lateral triangle is intended to alert the user to the presence of

uninsulated “dangerous voltage” within the product’s enclosure

that may be of sucient magnitude to constitute a risk of elec-

tric shock to persons.

The exclamation point within an equilateral triangle is intended

to alert the user to the presence of important operating and

maintenance (servicing) instructions in the literature accompa-

nying the product.

1.2. Important Safety Instructions

yRead these instructions

yKeep these instructions

yHeed all warning

yFollow all instructions

1. Water and Moisture

The apparatus should be protected from moisture and rain and can not be used

near water; for example near a bathtub, a kitchen sink, a swimming pool, etc.

2. Heat

The apparatus should be located away from heat sources such as radiators, stoves

or other appliances that produce heat.

ZEUS X Series

4-CH Power Amplifiers with Crossover

3. Ventilation

Do not block areas of ventilation opening. Failure to do could result in re. Always

install according to the manufacturer’s instructions.

4. Object and Liquid Entry

Objects do not fall into and liquids are not spilled into the inside of the apparatus

for safety.

5. Power Cord and Plug

In case of external power cord, protect it from being walked on or pinched partic-

ularly at plugs, convenience receptacles, and the point where they exit from the

apparatus. Do not defeat the safety purpose of the polarized or grounding-type

plug. A polarized plug has two poles; a grounding-type plug has two poles and a

third grounding terminal. The third prong is provided for your safety. If the pro-

vided plug does not t into your outlet, refer to an electrician for replacement.

6. Fuse

In case of products with external fuse holder, in order to prevent the risk of re

and damaging the unit, please use only of the recommended fuse type as de-

scribed in the manual. Before replacing the fuse, make sure the unit turned o

and disconnected from the AC outlet.

7. Electrical Connection

Improper electrical wiring may invalidate the product warranty.

8. Cleaning

Clean only with a dry cloth. Do not use any solvents such as benzene or alcohol.

9. Servicing

Do not implement any servicing other than those means described in the manual.

Refer all servicing to qualied service personnel only. Only use accessories/attach-

ments or parts recommended by the manufacturer.

2. GETTING STARTED

2.1. Unpacking

Thank you for purchasing your ZEUS X Series Amplier. All units have been rig-

orously tested before leaving the factory. In order to facilitate your installation,

ZEUS X Series 4-CH Power Amplifiers with Crossover

commissioning and use of this product, please read this manual. Carefully unpack

the carton and check the contents to ensure that all parts are present and in good

conditions:

y1x ZEUS X Power Amplier

yThis User manual

If anything damaged during transport, notify the shipper immediately and keep

packing material for inspection. Again, please save its carton and all packing

materials. If the unit must be returned to the manufacturer, it is important that

the unit is returned in the original manufacturer’s packing. Please do not take any

action without rst contacting us.

Our products are subject to a continuous process of further development. There-

fore modications to the technical features remain subject to change without

further notice.

WARNING: Packaging box is not a toy! Keep out of reach of chil-

dren!!! Keep in a safe place the original packaging material for future

use.

3. PRODUCT OVERVIEW

ZEUS X Series is ideal for low-impedance multi-channel installations with power

ratings between 400W and 800W RMS @ 8ohm per channel. It is a 4-channel,

Class-H series with excellent sound and maximum reliability. It is possible to use in

Stereo, Parallel and Bridge mode (CH1-2 / CH3-4).

Each channel integrates a crossover with a low-pass lter, for use with both full-

range systems and subwoofers, without the need for external processors. The

protection system includes the signal limiter, on-o muting, DC-oset detection,

thermal protection, and current limiting. The cooling system is extremely ecient

and controls the speed of the two fans in order to ensure excellent noise reduc-

tion.

The quality of copper used for power transformer, the selected capacitors and

power transistors, and the precision of lters make ZEUS X Series ampliers abso-

lutely stable, reliable in any installation or live application.

3.1. Main Features:

yPowers from 4x400W to 4 x 800W @ 8ohm in 2U

ZEUS X Series

4-CH Power Amplifiers with Crossover

yHigh-quality components and Class-H consolidated technology for maximum

reliability

y4-Channel 2U high performance and multi-function design, with independent

sweepable low-pass lters on each-channel

yVariable-speed fans for quiet and ecient cooling

yFull protection system includes signal limiter, on-o muting, DC-oset detec-

tion, thermal protection, and current limiting

4. FRONT PANEL

1 2 3 4

5 6 7 8

1. Power LED (Green)

The Green POWER LED lits whenever power is ON. This LED is present in each of

the 4 channels.

2. Signal LED (Green)

This LED lights up when the signal level reaches -35 dB, which should produce a

sound that is easily audible in the speakers. If this LED remains on when no signal

is expected, there may be interference or other abnormal conditions. This LED is

present in each of the 4 channels.

3. Clip LED (Orange)

This LED, present on all channels, lights up when the corresponding channel has

an output overload. Some ashing may be normal but if these LEDs remain on for

a long time, please reduce the input signal levels until the LEDs turn o.

4. Protect LED (Red)

When this LED light up it means that the corresponding channel is in protection

mode (speaker is cut o by relay) and that a possible damage is in progress. Of

course, each channel is provided of this LED.

ZEUS X Series 4-CH Power Amplifiers with Crossover

5. Gain Control

Each channel has a 41-step Gain control with approximately 20dB of input head-

room. The dB steps are maintained down to 14dB of atten uation.

Note: The headroom is the margin between the nominal level of a

signal and the maximum level that the amplifier is able to handle cor-

rectly before saturation occurs with consequent clipping.

6. Operative Mode Indicator

This is a bi-color LED that warns the user about the operating mode of the ampli-

er. If the LED is lit in orange it means the amplier is in PARALLEL mode. When it

is lit with yellow, it indicates that the amplier is in MONO-BRIDGE mode.

7. Power Switch

Press the switch to the (1) position to turn ON the amplier and to the (0) position

to turn it OFF.

Note: When the power switch is turned OFF, the device is not com-

pletely disconnected from the mains. So if the amplifier is not used

for a long time, please disconnect the power cord from the outlet.

8. Front Panel Ventilation Grid

It allows constant ventilation between the front and back of the amplier. This se-

ries ampliers pull air from the rear, and aspirates it from the front, thus allowing

the heat to dissipate without heating the rack. When the amp works harder, the

fan will speed up and expel more hot air. It is suggested not to obstruct this grill.

5. REAR PANEL

12 2

3 45 7

29 10 11 10 11 10 9

4 1 1 1

10 9

ZEUS X Series

4-CH Power Amplifiers with Crossover

1. Input and Link Connectors

Each channel has one balanced female XLR connector, which accepts an XLR plug

from almost any type of equipment with a balanced or unbalanced output.

Male LINK connectors are connected in parallel with the respective INPUTs, so the

LINK is wired at the same way.

Note: When possible, always use balanced cables. Unbalanced ca-

bles can also be used, but there may be noise problems. In any case,

avoid using balanced cables for some channels and unbalanced for

others.

2. Output Connectors

Each channel has one Speakon® output for connecting to loudspeakers. CH1 and

CH3 provide “4-wire” access to both channels using the standard convention:

yCH1 uses 1+, 1-; and CH2 uses 2+, 2-.

yCH3 uses 1+, 1-. and CH4 uses 2+, 2-

yCH2 and CH4 provide “2 wire” access respectively to CH2 and CH4 only, using

1+, 1-.

3. AC Power Cable And AC Voltage

ZEUS X series ampliers are designed to operate at 220V - 50/60Hz. Check that

the socket to which the amplier is connected provides this voltage before turn-

ing on the unit.

Note: If you happen to damage the AC line-cord, always use a three-

pin plug with a ground pin. The wire correspondence is as follow:

Cable Pin International

Brown Live L

Blue Neutral N

Yellow/Green Earth

Always connect the earth! Pay attention to your safety!

Before taking into operation for the rst time, the installation has to be approved

by an expert.

4. Ventilation Grids

These grids allow constant ventilation between the front and back of the amplier.

ZEUS X Series 4-CH Power Amplifiers with Crossover

It is suggested not to obstruct them.

5. Operation Mode Selectors

These are three-position switches that allows you the selection of BRIDGE, STE-

REO or PARALLEL operation modes for the two amplier sections (CH1 / CH2 -

CH3 / CH4).

6. Link Switch CH3/CH1

By putting this switch in the ON position, you can congure the amplier with 1

input and 4 outputs in PARALLEL MODE and with 1 input and 2 outputs in BRIDGE

MODE. In both cases CH1 must be the input signal. The volume adjustment for

the outputs will be made via CH1 and CH3 level controls.

7. Ground/Lift Switch

The ground/lift switch eliminates unwanted hum and buzz by interrupting the

ground loops between equipment, preventing current ow along the cable shield

between two devices.

8. Gain Sensitivity Selector

This 3-position switch allows you to select the sensitivity of the input signal so that

you always have an adequate margin (Headroom) between the nominal level of a

signal and the maximum level that the amplier can handle correctly before satu-

ration occurs with consequent signal reduction. This selector allows to choose, as

the input sensitivity, 0,775V, 1,4V or 2,5V.

9. Limiter Switches

These switches are used to activate (ON - Green LED ON) or disable (OFF- Red

LED ON) the protection of the input compression circuit. This protection function

is used to reduce the possibility that one or both of the channels (CH1 / CH2 -

CH3 / CH4) are clipping or overloaded and therefore to avoid damage to the

power amplier in case of malfunction of the input device (Mixer, CD Player, etc.).

10. Filter And Frequency Sections

These sections are provided by a three-positions switch, three LED and a knob in

order to select the lter type and cuto frequency corresponding to each channel.

When the switch is in OFF position (Green LED ON), it means that not any lter is

ZEUS X Series

4-CH Power Amplifiers with Crossover

used.

If the switch is in SUBWOOFER position (Orange LED ON), it means that low-pass

lter is used and the output signal is lower than the cut-o value frequency set

by FREQUENCY knob. When LOW-CUT is selected (Red LED ON), high-pass lter

is active and the cut frequency is set by FREQUENCY knob. The range for the

adjustable cut-o frequency is from 25Hz to 150Hz.

If amplier is set to BRIDGE MODE in a section or in both sections (CH1-CH2 and/

or CH3/CH4), only the switches and knobs on CH1 and/or CH3 are valid. Frequen-

cy control knobs and lter switches for CH2 and/or CH4 are disabled.

11. Processing Switch

If the switch is set to ON (Orange LED ON), the amplier adds low-frequency

compensation (80Hz/90Hz) to enhance the bass on the speaker output. If the

switch is in the OFF position (Green LED on), there is no eect on the audio signal.

Please note that this switch is active only when the FILTER switch is set to OFF.

6. AUDIO CONNECTIONS

You will need XLR cables for the connections to the amplier. See the picture be-

low that shows the internal wiring of these cables. Be sure to use only high quality

cables.

You can, of course, also connect unbalanced equipment to balanced inputs. Use

either mono and stereo jack, making sure ring and collar are connected together

(or pins 1 & 3 in the case of XLR connectors).

Balanced use of XLR connectors

1= Ground/Shield

2= Hot (+)

3= Cold (-)

INPUT OUTPUT

In case of unbalanced use Pins 1 and 3 will be jumped

7. OPERATION MODES

The ampliers of the ZEUS X Series have three operation modes:

ZEUS X Series 4-CH Power Amplifiers with Crossover

yStereo Mode

yParallel Mode

yBridge-Mono Mode

7.1. STEREO MODE

CH4 CH3 CH2 CH1

CH 4

CH 3 CH 1

CH 2

In STEREO MODE you have:

ySeparate 4 channel inputs (CH1-CH2-CH3-CH4).

ySeparate 4 channel outputs (CH1-CH2-CH3-CH4).

yEach channel has its level control.

This is the typical setting for amplifying stereo signals. The input signal of each

channel is present on the respective output speaker

To set the amplier in STEREO MODE, set MODE selector (5) to STEREO position

and connect the outputs as shown above.

Since the Speakon® CH1 and CH3 provide “4-wire”, in STEREO MODE, as alterna-

ZEUS X Series

4-CH Power Amplifiers with Crossover

tive wiring, it is possible to use just a pair of Speakon connectors (by using all the

four pins): one for channels 1 and 2, one for channels 3 and 4.

CH4 CH3 CH2 CH1

CH 1CH 2

CH 3CH 4

CH1/CH3

CH2/CH4

ZEUS X Series 4-CH Power Amplifiers with Crossover

7.2. PARALLEL MODE

CH4 CH3 CH2 CH1

CH 4

CH 3 CH 1

CH 2

PARALLEL MODE, with a mono input and two mono outputs, allows you to insert

a mono signal into an input and have the mono signal in both outputs, with sepa-

rately adjustable level controls. The input signal (CH1 or CH2/ CH3 or CH4) will be

present on both output Channels (CH1 and CH2/ CH3 and CH4).

To set the amplier in PARALLEL MODE, the MODE selector (5) should be set to

the PARALLEL position (To center) and connect the outputs as shown above.

Since the Speakon® CH1 and CH3 provide “4-wire”, in PARALLEL MODE, as alter-

native wiring, it is possible to use just a pair of SPEAKON connectors (by using all

the four pins): one for the channels 1 and 2, one for the channels 3 and 4.

ZEUS X Series

4-CH Power Amplifiers with Crossover

CH4 CH3 CH2 CH1

CH 1CH 2

CH 3CH 4

CH1/CH3

CH2/CH4

7.3. PARALLEL MODE CH3 LINK CH1

CH1

CH 4

CH 3 CH 1

CH 2

OFF

ZEUS X Series 4-CH Power Amplifiers with Crossover

If the switch CH3 LINK CH1 is in ON position you can congure the amplier with

1 input and 4 outputs. In this case CH1 must be the input. Please connect the

outputs as shown above.

7.4. BRIDGE MODE

CH3 CH1

CH 3

CH 1

2+1+ 2+1+

BRIDGE MODE with a mono input and a mono output, allows you to add the

respective signals of the two amplication channels and make them available on

a single output. The input signals of channel 1 and channel 3 will be sent respec-

tively to CHANNEL 1 OUTPUT and CHANNEL 3 OUTPUT. Use the channel 1 and

channel 3 controls to adjust the volume.

To set the amplier in the BRIDGE MODE, set the MODE selector(5) to the BRIDGE

position (To Right) and connect the output as shown above.

ZEUS X Series

4-CH Power Amplifiers with Crossover

7.5. BRIDGE MODE CH3 LINK CH1

CH1

OFF

CH 3 CH 1

2+1+ 2+1+

If the switch CH3 LINK CH1 is in ON position you can congure the amplier with

1 input and 2 outputs. In this case CH1 must be the input. Please connect the

outputs as shown above.

8. RACK MOUNTING AND DIMENSIONS

Use four screws and washers to mount the amplier to the equipment rack rails.

To use the amplier outside a rack, attach the self-adhesive rubber feet to the

bottom.

In the applications where the rack assembly may be moved, we strongly recom-

mend supporting the rear of the amplier. Optional rack handles provide nger

grips at each end, making lifting and setting into the rack more comfortable.

ZEUS X Series 4-CH Power Amplifiers with Crossover

483mm (19”)

428mm (16.9”)

89mm

(3.5”)

463.5 mm (18.3”)

ZEUS X Series

4-CH Power Amplifiers with Crossover

9. SPECIFICATIONS

Model ZEUS 404X ZEUS 604X ZEUS 804X

8Ω Stereo Out Power 400W 600W 800W

4Ω Stereo Out Power 600W 900W 1200W

8Ω Bridge Out Power 1300W 1900W 2500W

Input Sensitivity 0,775V / 1,2V / 2,5V

Input Impedance >10KΩ, balanced or unbalanced

Frequency response 20Hz-20kHz, +1/-1dB

THD (1W @ 1m) < 0,1%

Damping Factor 300

Crosstalk > 70

S/N Ratio ≥ 100dB

Amplier Class H

Power Requirements 220V – 50/60Hz

Power Consumption

(Average/Peak) 420W/1350W 630W/2000W 850W/2550W

Input Connectors 3-Pin Female XLR

Output Connectors Female Speakon®

Link Connectors 3-Pin Male XLR

Cooling 2 fans with variable speed according to internal temperature. Airow from

front panel to rear

Dimension (WxDxH) 483 x 463.5 x 89 mm (12.27 x 11.77 x 2.26 in)

Rack Mount Yes, 2x 19” Rack Units

Packing Size (WxDxH) 570 x 580 x 155 mm (22.44 x 22.83 x 6.10 in)

Net Weight 24,5 Kg (54.01 lbs.) 25 Kg (55.11 lbs.) 25,5 Kg (56.22 lbs.)

Gross Weight 28,5 Kg (62.83 lbs.) 29 Kg (63.93 lbs.) 29,4 Kg (64.81 lbs.)

Our products are subject to change. Modications to technical features remain subject to change without notice

ZEUS X Series 4-CH Power Amplifiers with Crossover

10. WARRANTY AND SERVICE

All HELVIA® products are covered by warranty according to European regulations (2 years

in the case of purchase by private person - B2C; 1 year in the case of purchase by company

- B2B). The warranty is valid from the date of purchase by the end user (private individual

or company), indicated in the purchase document (receipt in the case of private person;

invoice in the case of company). The following cases / components are not covered by the

above warranty:

yAll accessories supplied with the product;

yImproper use;

yFailure due to wear and tear;

yAny unauthorized modication of the product by the user or third parties.

HELVIA must meet the warranty obligations due to any non-compliant materials or manu-

facturing defects, by remedying free of charge at HELVIA’s discretion by either repairing or

replacing specic parts or the entire equipment. Any defective parts removed by a product

in the event of a warranty claim become property of HELVIA.

During the warranty period, defective products can be returned to HELVIA retailer or

installer with proof of original purchase (receipt or invoice). To avoid damage during trans-

port, please use the original packaging, if available. For more information, visit the website:

www.helviasystems.com.

11. WARNING

READ CAREFULLY - only for EU and EEA (Norway, Iceland and Liechtenstein).

This symbol indicates that the product must not be disposed of with household waste,

according to the WEEE directive (2202/96/EC and subsequent amendments) and national

legislation.

The product must be delivered to a designated waste collection center (e.g. on an autho-

rized one-for-one basis when you buy a new similar product, or to an authorized collection

site for recycling waste electrical and electronic equipment).

Improper handling of this type of waste can have a negative impact on the environment

and human health due to potentially dangerous substances that are generally associated

with electrical and electronic equipment. At the same time, your cooperation in the proper

disposal of this product will contribute to the eective use of natural resources.

For more information about where you can drop o your waste equipment for recycling,

please contact your local city oce, waste authority, approved WEEE scheme or your

household waste disposal service.

La pagina sta caricando ...

HELVIA ZEUS X Series Manuale utente

Marca: HELVIA

Modello: ZEUS X Series

Categoria: Attrezzatura musicale

Tipo: Manuale utente

Scarica il pdf

rapporto

in altre lingue

English: HELVIA ZEUS X Series User manual

HELVIA ZEUS X Series Manuale utente

HELVIA ZEUS X Series Manuale utente

in altre lingue

Documenti correlati

Altri documenti