Paradyne SuperLine 6510 Quick Installation

Tipo
Quick Installation
99-16485
PC
or
Hub
SuperLine IAD
LINE
PHONE
99-16410
g
e
p
r
u
fte
S
ic
h
e
rh
e
it
R
LR92997
TM
TUY
PRODUCT SERVICE
Phone Filter
P/N 0802-3392-00
Made in China / Fabriquè China
Bel Fuse Inc. 1198
ACCESSARY
L.T.E. EQUIPMENT
E100296
SuperLine IAD
Model 6510
Quick Installation
Document Number 6510-A2-GZ40-00
September 1999
Quick Installation
Go to the room where you want your high-speed data connection. Plug the
phone cable that came with the SuperLine IAD into the wall jack. Plug the
other end of the phone cable into the LINE jack on the back of the
SuperLine IAD.
Plug your Ethernet cable into the ETHERNET jack. Plug the other end of
the cable into the network interface card in your PC, or into your Ethernet
hub.
Use an Ethernet crossover cable to connect a PC, or a straight-through
Ethernet cable to connect a hub.
Pop open the ferrite choke using a fingernail or a coin.
Close it around the power cable near the round plug. Slide the ferrite choke
as close to the plug as it will go. Installlation of this choke is essential to
maintain compliance with Part 15, FCC Rules.
Plug the power transformer into an ac outlet and the POWER jack.
See the SuperLine IAD Installation Instructions for more information.
Phone Filters
Connect a phone filter to all the phones and other devices (such as fax
machines, answering machines, alarm systems, or modems) that are attached
to the same line as the SuperLine IAD. (Do not connect a filter to any device
you plug into the SuperLine IAD.)

*6510–A2–GZ40–00*
Copyright 1999 Paradyne Corporation
  • Page 1 1

Paradyne SuperLine 6510 Quick Installation

Tipo
Quick Installation

in altre lingue