00062764/06.07
All listed brands are trademarks of the corresponding companies. Errors and omissions excepted,
and subject to technical changes. Our general terms of delivery and payment are applied.
Hama GmbH & Co KG
D-86651 Monheim/Germany
www.hama.com
Die Konformitätserklärung nach der R&TTE d
Richtlinie 99/5/EG fi nden Sie unter www.hama.com
See www.hama.com for declaration of g
conformity according to R&TTE Directive 99/5/EC guidelines
La déclaration de conformité à la directive f
R&TTE 99/5/CE se trouve sur www.hama.com
La declaración de conformidad según la e
directiva R&TTE 99/5/CE la encontrará en www.hama.com
De conformiteitsverklaring conform de o
R&TTE-richtlijn 99/5/EG vindt u onder www.hama.com
La dichiarazione di conformità secondo la i
direttiva R&TTE 99/5/CE è disponibile sul sito
www.hama.com
A declaração de conformidade segundo a p
directiva R&TTE 99/5/CE pode ser consultada em
www.hama.com
Konformitetsförklaring enligt R&TTE riktlinje s
99/5/EG fi nner du på www.hama.com
Radio- ja telepäätelaitteita koskevan m
direktiivin 99/5/EY mukainen vaatimustenmukaisuusvakuutus löytyy
osoitteesta www.hama.com
Overensstemmelseserklæringen i henhold til R&TTE-retningslinierne j
fi nder du under HYPERLINK „http://www.hama.com”
Deklaracja zgodności według dyrektywy
q
R&TTE 99/5/EG dostępna na stronie internetowej www.hama.com
A megfelelőségi követelmények megegyeznek
h
az R&TTE Irányelvek 99/5/EG ajánlásaival www.hama.com
Prohlášení, o shodě podle směrnice
c
R&TTE 99/5/EG, naleznete na www.hama.com
Prehlásenie o zhode podľa R&TTE smernice
v
99/5/EG nájdete na www.hama.com
Τη δήλωση συμμόρφωσης σύμφωνα με την
k
οδηγία 99/5/EΚ περί R&TTE θα τη βρείτε στη διεύθυνση www.hama.com
Software: (D) (GB) (F)
(D) Dieses Gerät darf nur in den folgenden Ländern betrieben werden:
(GB) The operation of this device is only allowed in the following countries:
(F) Cet appareil ne peut être utilisé que dans les pays suivants:
(E) Este aparato se puede utilizar sólo en los países siguientes:
(I) L’uso di questo apparecchio é ammesso soltanto nei seguenti Paesi:
(NL) Dit apparaat mag alleen gebruikt worden in de volgende landen:
(DK) Dette apparat må kun benyttes i følgende lande:
(PL) Urządzenie sprzedawane jest tylko w następujących krajach:
(H) Ez a készülék a következő országokban üzemeltethető:
(CZ) Tento přístroj se smí používat pouze v následujících zemích:
(SK) Toto zariadenie sa môže používať len v týchto krajinách:
(S) Denna apparat får endast användas i följande länder:
(FIN) Tätä laitetta saa käyttää vain.
(P) Este aparelho pode ser utilizado somente na.
(GR) Αυτή η συσκευή επιτρέπεται να λειτουργεί μόνο στις παρακάτω χώρες:
(D) (A) (CH) (GB) (F) (B) (I) (NL) (E) (DK) (S) (H) (PL) (CZ) (SK) (GR) (P) (FIN) (L) (IRL)
!
WLAN USB Stick;
54 Mbps
WIRELESS LAN
00062764
2
Contents
1. Installing the driver and configuration program on Windows 2000/XP Page 03
2. The configuration program – introduction and operation on Windows 2000/XP Page 04
2.1 Quick configuration Page 04
2.2 Detailed configuration Page 04
2.2.1 Creating a new profile Page 05
2.2.1.1 Infrastructure mode Page 05
2.2.1.2 Ad-hoc mode Page 05
2.2.2 Setting the wireless LAN encryption Page 06
2.2.2.1 WEP encryption Page 06
2.2.2.2WPA/WPA2 encryption Page 07
3. Installation and configuration under Windows Vista Page 08
3.1 Operation of the Windows Vista configuration program Page 08
3.2 Setting up an Ad-hoc network Page 09
4. Configuring the operating system and computer (Windows) Page 09
5. Uninstalling the driver and configuration program on Windows Page 10
6. Installing the driver and configuration program on MAC OS X Page 10
7. Configuring the operating system and computer (MAC OS X) Page 11
8. The configuration program – introduction and operation on MAC OS X Page 11
8.1 Quick configuration Page 12
8.2 Detailed configuration Page 12
8.2.1 Creating a new profile Page 12
8.2.2 Setting the wireless LAN encryption Page 13
8.2.2.1 WEP encryption Page 14
8.2.2.2 WPA/WPA2 encryption Page 14
9. Support and contact information Page 15
g
Operating Instruction
3
Package contents:
1x Wireless LAN USB Stick 54 Mbps
1x USB connection cable
1x driver CD-ROM
1x printed operating instructions
Remark concerning the positioning:
The connection quality depends strongly on the place or surroundings where you put up the WLAN device. Please ensure that the de-
vice or its antennae are neither covered nor built in. Use the enclosed USB extension cable for this purpose. We advise you against
putting it up near metallic objects or other electric or radiant devices. In case of reception fl uctuations or connection interruptions we
recommend you to move interference sources such as DECT telephones, mobile phones, Bluetooth devices or other WLAN networks
out of the way. If this is not possible, it may also be helpful to change the cable.
System requirements:
• PC or laptop with free USB port
• Operating system Windows 98SE/ME/2000/XP/XP-x64 Edition, Vista or MAC OS X 10.3.x/10.4.x
Safety instructions:
Do not operate the device in damp or extremely dusty environments. Protect the device from pressure and impact. The device may
not be opened or moved during operation.
1. Installing the driver and configuration program on Windows 2000/XP
Before installation, please save any open documents you may be working on. Then
close all running programs. Insert the CD-ROM provided in the drive. Usually, the
CD starts automatically. If the menu does not start automatically, double-click the
corresponding CD-ROM drive icon in My Computer. The following window opens
after the program starts: Select the required language. The following window is
displayed when you select the language.
This installation process is suitable for Windows 98SE/ME/2000/XP/XP-x64
Edition/Vista.
Click Install (Win 2000/XP) to continue with the installation. Click User Guide to
open the operating instructions. Adobe Reader is required to display PDF fi les. If
you have not yet installed Adobe Reader, you will fi nd a free version on the enclo-
sed driver CD. Click Download driver to download the latest driver from the Hama
website. This allows you to check whether drivers have now been developed for
previously unsupported systems. Click Back to return to language selection.
When you select Install, the InstallShield Wizard is loaded. This can take a few
seconds. Please wait until the InstallShield Wizard starts.
Read the license agreement and click Yes if you accept it.
For Windows XP users only
The next screen prompts you to choose whether you want to configure the Wireless LAN Adapter using the Hama Configuration
Program or the configuration program integrated in Windows. We recommend that you use the Hama Configuration Program.
To do so, select Hama Wireless Utility and click Next.
In the next screen, select Configure for best WiFi compatibility and click Next.
The necessary data is now installed. Connect your USB stick to a free USB port as soon as you are prompted to do so by the installa-
tion program.
Click Finish to complete the installation. You may have to restart the operating system.
We also recommend working with a profile on these operating systems from the beginning, i.e. using detailed configuration.
4
2. The configuration program – introduction and operation on Windows 2000/XP
Open the Hama Configuration Program. To do so, click Start -> Programs -> Hama Wireless LAN -> Hama Wireless LAN Utility.
If the program is already running in the background, you will fi nd in the task bar at the bottom right of the screen:
Click the circled symbol to open the utility from the task bar. The Hama
Wireless LAN Utility starts with the following screen, whereby the values
in the columns may be different.
This screen shows all available wireless networks. The SSID, which
is used to identify WLAN devices in the respective wireless LAN, the
router MAC address (BSSID), the signal strength, the channel used, the
encryption algorithm and the authentication and the type of network
are displayed. The lower section of this window shows the connection
status (Connected / Disconnected). Click Update to search for wireless
networks again.
2.1 Quick configuration
First, select the required network by clicking the corresponding line in the list. The network selected is highlighted in blue in the list.
Now click the Connect button. You are connected to the network if the selected network is run without encryption and the signal is
strong enough. This is indicated by the green symbol and Connected is shown in the status window.
If the network you selected is encrypted, another window opens in which you can enter the encryption data. The data must be identi-
cal to the router or access point settings. The authentication type and encryption are generally already selected in accordance with
the target network. Enter the code which must correspond exactly with the code used by the router or access point.
Click Ok to confirm after you make your entries.
If you do not have this code yourself, please contact the person responsible for configuring the router or access point.
For detailed information on setting encryption, please see Page 6, under the heading: Setting the wireless LAN encryption.
If you have made these entries successfully, a green symbol is also displayed to indicate the successfully connection in the network
overview.
For further information on the connection made, open the Status tab. It contains information on the Connection quality, Signal
strength or Interference level.
2.2 Detailed configuration
When configuring your USB stick, it is useful to create a profile. A profile serves to save various settings for a connection under a
certain name. For example, if you want to connect to various wireless networks, you can save the settings for the networks in profiles,
which allows you to change the configuration quickly.
5
2.2.1 Creating a new profile
You need the following information to create a profile:
• SSID (network ID): This is the name of the required network.
• Encryption used in the target network
• Network type (type of network): Infrastructure or ad-hoc
There are two basic ways to create a profile:
Version 1 : Change to the Profile tab and click Add.
or
Version 2 : Open the Site Survey tab. All networks are listed in this tab. Select the required network in the list and click Add
to profile.
For hidden networks only:
If the SSID fi eld is empty, the router or access point is set to hide the network. The SSID cannot therefore be copied
automatically.
In both cases, the following window is displayed on the screen:
This USB stick allows you to set up two different network types.
Infrastructure: Select this type if you want to connect this wireless LAN
device to a wireless LAN router or access point.
Ad-hoc: Select this type if you want to connect directly to another
wireless LAN client device, e.g. another USB stick or a WLAN PCI card
without a wireless LAN router or access point. Two WLAN client devices
are required for this.
2.2.1.1 Infrastructure mode
First enter a name for your profile (Profile name), e.g. “PROF1”.
If you have selected version 1 to create the new profile, you must enter the network ID (SSID) of the target network in the SSID fi eld.
This is in the wireless LAN settings in your router or access point or you can ask the person in charge. If you have selected version 2,
the SSID has already been copied automatically from the network overview.
To reduce the energy consumption, you can run the stick in Power saving mode. In this mode, certain functions are deactivated or run
at a lower setting if they are not fully used. Select Constantly Awake Mode if you want to work at full power all the time.
Select Infrastructure under network type. This mode facilitates connection to a wireless LAN router or access point. The settings for
TX Power, RTS Threshold and Fragment Threshold can be left at the default settings.
If your network uses encryption, switch to the Authentication and Security tab and continue configuration under Setting wireless
LAN encryption.
If your network is not encrypted, click OK to accept the settings. To activate the profile created, switch to the Profiles tab, select the
profile and then click Activate.
2.2.1.2 Ad-hoc mode
First enter a name for your profile (Profile name), e.g. “PROF1”.
If you have selected version 1 to create the profile, you must enter the network ID (SSID) of the target network in the SSID fi eld. This
is in the wireless LAN settings in your router or access point or you can ask the person in charge. If you have selected version 2, the
SSID has already been copied automatically from the network overview.
6
To reduce the energy consumption, you can run the stick in Power saving mode. In this mode, certain functions are deactivated or run
at a lower setting if they are not fully used. Select Constantly Awake Mode if you want to work at full power all the time.
Select Ad-hoc under network type. This mode allows you to connect to other wireless LAN client devices, e.g. USB sticks, PCI cards
or cardbus.
The settings for TX Power, Preamble, RTS Threshold and Fragment Threshold can be left at the default settings. Ad-hoc WLAN mode
allows you to set the standard to be used. This depends on the other devices used in your network. You can then select either 802.11b
(11Mbps) only: Then this standard only is used; 802.11g (54Mbps) only: Then this standard only is used; or 802.11b/g: If this is selected,
both standards are supported. If you are unsure which standards your devices support, you should use the mixed mode. You must also
set the wireless LAN channel used under Channel. In Europe, there are 13 channels in the 2.4 GHz frequency range.
If your network uses encryption, switch to the Authentication and Security tab and continue configuration under Setting wireless
LAN encryption.
If your network is not encrypted, click OK to accept the settings. To activate the profile created, switch to the Profiles tab, select the
profile and then click Activate.
2.2.2 Setting the wireless LAN encryption
First, it is important to understand a range of terms. The next section will explain the main terms used here:
Authentication: Authentication is a process in which the identity, e.g. of a person is determined based on a certain characteristic.
This can be done by fi ngerprint, password or any other proof of authorisation.
Encryption: Encryption is a process in which a plain text is transformed into a coded text via an encryption process (algorithm). One or
more codes can be used for this. It must also be mentioned that each individual encryption process offers one or more authentication
options.
Please switch to the Authentication and Security tab.
This device can be used with the following encryption types:
64 and 128 bit WEP encryption WPA and WPA2 encryption
Note!!! Encryption is deactivated by default.
However, for security reasons, we recommend
that you always use encryption.
2.2.2.1 WEP encryption
Wired Equivalent Privacy (WEP) is a standard encryption algorithm for WLAN. It both controls the access to the network and guaran-
tees the integrity of the data. This method is considered vulnerable due to a range of weaknesses.
If you want to use WEP encryption, select WEP under encryption. Two options are available for the Authentication type under WEP.
Select Open if all clients are to be enabled for WLAN. Now there is virtually no other authentication.
7
Select Shared if you want to use authentication with the challenge re-
sponse process. A shared code is used for authentication in this method.
All WLAN users must know this code.
All other selection options under Authentication type are meaningless
under WEP.
You can now store four codes in the lower section of the window. The
selected code is always used.
64 bit or 128 bit encryption is supported. 128 bit encryption is more secure.
First select whether you want to use Hex (allows characters from 0-9 and
a-f to be used) or ASCII characters (You can use any characters). The
setting and the selection of either 64 or 128 bit encryption determines the
length of the code to be entered.
WEP 64 bit ASCII requires 5 characters
WEP 64 bit HEX requires 10 characters
WEP 128 bit ASCII requires 13 characters
WEP 128 bit HEX requires 26 characters
Examples: 64 bit Hex (10 characters) = 231074a6ef
64 bit ASCII (5 characters) = j31n.
128 bit Hex (26 characters) = 231074a6b9773ce43f91a5bef3
128 bit ASCII (13 characters) = urlaub2006.+0
2.2.2.2 WPA/WPA2 encryption
Wi-Fi Protected Access (WPA) is an encryption method for WLAN. WPA contains the WEP architecture, but offers additional pro-
tection via dynamic codes, which are based on the Temporal Key Integrity Protocol (TKIP), and also offers pre-shared keys (PSK) or
extensible authentication protocol (EAP) for user authentication. However, a radius server is required for this. WPA2 is a development
of WPA and uses a different encryption algorithm, advanced encryption standard (AES).
WPA offers two types of authentication, either pre-shared key or authentication via special authentication protocols, which are
generally variations of EAP (Extensible Authentication Protocol). An authentication server (RADIUS server) is used for the latter
authentication method, which is rarely used for private applications. Your administrator can give you the information you require to
configure this authentication method.
The pre-shared key method is more common and offers a high degree of security.
To use WPA encryption, select WPA-PSK under Authentication type and TKIP under Encryption.
Now enter the code used in the WPA preshared key fi eld.
The code entered must be absolutely identical with that used in the net-
work. It must be min. 8 and max. 63 random characters for ASCII. Letters
(A-Z), numbers and punctuation marks can be used. 64 characters are
required for HEX, whereby only characters from 0-9 and a-f can be used.
If you do not have this code, it can be found in your router/access point or
you can ask the person responsible for these devices. Save the settings
and click OK.
8
To use WPA2 encryption, select WPA2-PSK under Authentication type
and AES under Encryption. Now enter the code used in the WPA presha-
red key fi eld.
The code entered must be absolutely identical with that used in the net-
work. It must be min. 8 and max. 63 random characters for ASCII.Letters
(A-Z), numbers and punctuation marks can be used. 64 characters are
required for HEX, whereby only characters from 0-9 and a-f can be used.
If you do not have this code, it can be found in your router/access point or
you can ask the person responsible for these devices.
Save the settings and click OK.
To activate the profile created, switch to the Profiles tab, select the profile
and then click Activate.
3. Installation and configuration under Windows Vista
Before installation, please save any open documents you may be working on.
Then close all running programs. Insert the CD-ROM provided in the drive. Usu-
ally, the CD starts automatically. If the menu does not start automatically,
double-click the corresponding CD-ROM drive icon in My Computer.
Remark: Please click “Run autorun.exe” if the window “Auto Play” appears
when the CD-ROM has been inserted. The following window opens after the
program starts: Select the required language.
Click “Install (Win Vista).” The message “An unidentified program wants access to
your computer” appears. Allow access by clicking “Allow”. Click -> Next in the next
window “Welcome to the InstallShield Wizard…”. Continue with “Install” and con-
nect the WLAN stick with your computer.
Wait until the window “InstallShield Wizard completed” appears and fi nish with
Finish.
3.1 Operation of the Windows Vista configuration program
Click the symbol with the two computer monitors in the task bar with the left mouse button:
Afterwards, you can establish connections to existing WLAN networks.
Click “Wireless networks are available” for this purpose. Wait a minute if this option cannot be
selected. Please check if the WLAN router or Access Point is operational if this does not help.
The found networks are displayed now. Select the correct network and click “Connect”.
Remark concerning hidden networks: the name is not shown in this case. Instead of that, it is
called “Unnamed Network”. When the connection has been established, you are asked for the
name.
9
Afterwards, you are mostly asked to enter the network security key. For
reasons of safety, we advise you against using uncoded networks.
Click “Connect” for confirmation.
Windows establishes now the connection to the desired WLAN. Afterwards,
you can store the network and start it automatically next time. The connec-
tion is so automatically established in future. Finish the configuration by
clicking with the mouse “Close”.
3.2 Setting up an Ad-hoc network
This enables direct connections to another Wireless LAN Client device, e.g. a USB stick or a WLAN PCI add-in card. No wireless LAN
router or Accesspoint is required for this.
If such a network already exists, you can establish a connection with this one as described above.
If it is to be set up a new, so that other users can connect themselves, you have to proceed as described below:
Click the symbol with the two computer monitors in the task bar with the left mouse button:
Click “Connect to a network”, “Set up a connection or network” and then
“Set up a wireless Ad hoc (computer-to-computer) network”. Confirm with
-> Next -> Next.
In the next window, you are asked to enter data concerning the network
name and the security type. More information is shown if you move the
mouse cursor towards the appropriate fi eld. Additional remarks concerning
the network name and WPA2 security key. Here, you should only use letters
from A-Z, as well as numbers from 0-9.
Confirm your specifications with -> Next -> Close.
4. Configuring the operating system and computer (Windows)
After you have successfully installed the network adapter, you still have to install or
configure a protocol. This protocol governs the data exchange between the computer
and the network. TCP/IP is most common. Each computer has to be assigned its own
address for the protocol. Automatic address assignment is only reliable if a DHCP
server exists in the network, e.g. a router or access point. If you have one of these
devices with a DHCP function, you should leave the setting on “Get automatically”.
Proceed as follows to check the settings on your PC:
Start -> Settings -> Control panel -> Network connections
Select the connection (network adapter) via which your PC is connected to the
router, e.g. “LAN connection”. When you right-click the corresponding connection,
the following screen is displayed when you select Properties.
Select the Internet Protocol (TCP/IP) entry in the list and click Properties.
10
Select Optain an IP address automatically and Optain DNS server
address automatically, if there is a DHCP server in your network. Confirm
by clicking OK, and again in the subsequent window.
Your PC is now configured such that the router assigns the IP address
automatically.
If you do not have a device with an integrated DHCP server, you must
assign the IP addresses manually. The following example describes basic
setup using manual address assignment. For local networks, special
address ranges are provided which are not transmitted over the internet.
As an example, a range that you can use for your network is 192.168.1.1 to
192.168.1.254. The fi rst PC is assigned the address 192.168.1.1, the second
192.168.1.2, the third 192.168.1.3, etc.
Select Use the following IP address and enter your IP address in accor-
dance with the sample.
1.PC = IP address 192.168.1.1 Subnet mask 255.255.255.0
2.PC = IP address 192.168.1.2 Subnet mask 255.255.255.0
Click Ok to confirm your entries.
5. Uninstalling the driver and configuration program on Windows
Select Start => Settings => Control Panel => Software
To do so, select Hama Wireless Utility and click Remove. At the next prompt, click Remove completely.
Remove the device from your computer when prompted to do so. Afterwards click OK.
The program is now deleted from your computer.
After the software is removed, you may have to restart the system. Save all open documents and close all programs before restarting
the PC.
6. Installing the driver and configuration program on MAC OS X
Before installation, please save any open documents you may be working on. Then close all running programs. Ensure that you have
administrator authorisations to enable you to install the driver correctly.
Connect the Hama WLAN USB stick to a free USB 2.0 port. Then start your Apple computer. After the operating system has loaded
completely and the desktop is complete, insert the enclosed driver CD-ROM in your drive. An icon with the CD-ROM then appears on
your desktop. Double-click the icon and select the MAC driver directory in the Finder window. This directory contains the DMG fi le
required for installation. Double click the DMG fi le to activate the image.
After you activate the image, select the correct directory for your installed MAC OS X Version and then double click the correspondi-
ng PKG fi le. Installation is now started.
Select your hard drive on which you want to install the driver and the configuration program. You must then restart the system.
11
7. Configuring the operating system and computer on MAC OS X
After you have installed the driver, you must configure the network
environment in accordance with the new situation. To do so, proceed as
follows.
Click the Apple symbol in the upper menu bar and select the Environ-
ment menu item.
Select the “Network” setting menu item. The following window opens.
Click OK to confirm the message.
Note: If the message shown above is not displayed, the Hama
WLAN USB Stick was not correctly identified by your PowerMac.
Ensure that the stick is correctly connected to a USB 2.0 port and
that the USB 2.0 interface card was correctly installed in your
system.
After the Hama WLAN USB Stick has been properly detected, the
following window opens.
Select the New environment… option under Environment.
Name the new environment e.g. WLAN and click the OK button.
Select the Environment menu item again in the Network window and
select the New environment which has also been selected, WLAN in
our case. Next, select the Show/Display menu item in the Network
window and
select the Network configurations option.
Note: The process for selecting the connections can vary depending on
the MAC model and features.
In our case, remove the tick for all connections except the Ethernet
connection (en2). Then click the Activate button.
The configuration process is now complete for your system.
8. The configuration program – introduction and operation on MAC OS X
As the Hama WLAN USB Stick is not an official Apple Airport product, you cannot use the Airport soft-
ware integrated in the system. To configure the Hama WLAN USB Stick, you must open the enclosed
utility. Open the fi nder and select the hard drive where you installed the driver and the utility earlier.
The utility is installed in the Programs directory by default. Double-click the WirelessUtilityRT73USB
icon.
12
The following window opens:
This screen shows all available wireless networks.
The SSID, which is used to identify WLAN devices in the respective wire-
less LAN, the router MAC address (BSSID), the signal strength (signal),
the channel used (channel), the encryption algorithm (encryption) and the
authentication (authentication) and the type of network (network type)
are displayed.
The lower section of this window shows the connection status (Con-
nected / Disconnected). Click RESCAN to search for wireless networks
again.
8.1 Quick configuration
First, select the required WLAN network by clicking the
corresponding line in the list. The network selected is
highlighted in blue in the list. Now click the Connect
button.
You are connected to the network if the selected network
is run without encryption and the signal is strong enough.
This is indicated by the green symbol and Connect is
shown in the status window.
If you have activated encryption, you are asked for the
code. Enter the code in the corresponding fi eld.
You can enter the data required for encryption here.
The data must be identical to the router or access point
settings. The authentication type and encryption are
generally already selected in accordance with the target
network. Enter the code which must correspond exactly with the code used by the router or access point. Click OK to confirm after
you make your entries.
If you do not have this code yourself, please contact the person responsible for configuring the router or access point.
For detailed information on setting encryption, please see Page 13, under the heading:
Setting the wireless LAN encryption.
For further information on the connection made, open the Link status tab. This shows information such as the Link quality and Signal
strength.
8.2 Detailed configuration
When configuring your Hama WLAN USB stick, it is useful to create a profile. A profile serves to save various settings for a con-
nection under a certain name. For example, if you want to connect to various wireless networks, you can save the settings for the
networks in profiles, which allows you to change the configuration quickly.
8.2.1 Creating a new profile
You need the following information to create a profile (Profile):
• SSID (network ID): This is the name of the required network.
• Encryption Type: Encryption used in the target network
• (Network Type): (type of network): Infrastructure or ad-hoc
Open the Wireless Utility. Using the Network overview (Site survey) tab, you can select the required network and then open the dialog
box using the ADD PROFILE button, or open the Profile tab and start the dialog box by clicking the ADD button.
13
First enter a name for your profile (Profile name). Under SSID, select the
network you want to connect to from the list of available networks.
To reduce the energy consumption, you can run the stick in Power saving
mode. In this mode, certain functions are deactivated or run at a lower
setting if they are not fully used. Select CAM (Constantly Awake Mode), if
you want to run the stick at full power all the time.
This Hama WLAN USB Stick allows you to set up two different network
types. Select Infrastructure under Network type, if you want to connect
to a router or access point. The settings for TX Power, RTS Threshold and
Fragment Threshold can be left at the default settings.
If you want to connect to another WLAN client device without a router or
access point, select 802.11 Ad-hoc.
The settings for TX Power, Channel, RTS Threshold and Fragment Threshold can be left at the default settings.
8.2.2 Setting the wireless LAN encryption
First, it is important to understand a range of terms. The next section will explain the main terms used here:
Authentication: Authentication is a process in which the identity, e.g. of a person is determined based on a certain characteristic.
This can be done by fi ngerprint, password or any other proof of authorisation.
Encryption: Encryption is a process in which a plain text is transformed into a coded text via an encryption process (algorithm). One or
more codes can be used for this.
It must also be mentioned that each individual encryption process offers one or more authentication options.
Now switch to the Advanced tab.
Wireless mode allows you to set the standard to be used. This depends on the other devices used in your network. You can choose
either 802.11 B only mode (11 Mbps): Then this standard only is used; or 802.11 B/G mixed mode up to 54 Mbps): Both standards are
then supported; If you are not sure which of the standards your devices support, you should use the mixed mode (802.11 B/G mixed
mode). Make all other settings as shown in the image below.
Click Apply to confirm your entries.
This device can be used with the following encryption types:
64 and 128 bit WEP encryption WPA Encryption
Note!!! Encryption is deactivated by default.
However, for security reasons, we recommend
that you always use encryption.
14
8.2.2.1 WEP encryption
Wired Equivalent Privacy (WEP) is a standard encryption algorithm for WLAN. It both controls the access to the network and guaran-
tees the integrity of the data. This method is considered vulnerable due to a range of weaknesses.
If you want to use WEP encryption, select the following settings:
Two options are available for the Authentication type under WEP.
Select Open if all clients are to be enabled for WLAN. Now there is
virtually no other authentication.
Select Shared if you want to use authentication with the challenge re-
sponse process. A shared code is used for authentication in this method.
All WLAN users must know this code.
All other selection options under Authentication type are meaningless
under WEP.
You can now store four codes in the lower section of the window. The
selected code is always used.
64 bit or 128 bit encryption is supported. 128 bit encryption is more secure. First select whether you want to use Hexadecimal (allows
characters from 0-9 and a-f to be used) or ASCII (you can use any characters). The setting and the selection of either 64 or 128 bit
encryption determines the length of the code to be entered.
WEP 64 bit ASCII requires 5 characters
WEP 64 bit hexadecimal requires 10 characters
WEP 128 bit ASCII requires 13 characters
WEP 128 bit hexadecimal requires 26 characters
Examples: 64 bit hexadecimal (10 characters) = 231074a6ef
64 bit ASCII (5 characters) = j31n.
128 bit hexadecimal (26 characters) = 231074a6b9773ce43f91a5bef3
128 bit ASCII (13 characters) = urlaub2006.+0
8.2.2.2 WPA encryption
Wi-Fi Protected Access (WPA) is an encryption method for WLAN. WPA contains the WEP architecture, but offers additional pro-
tection via dynamic codes, which are based on the Temporal Key Integrity Protocol (TKIP), and also offers pre-shared keys (PSK) or
extensible authentication protocol (EAP) for user authentication. However, a radius server is required for this.
WPA offers two types of authentication, either pre-shared key or authentication via special authentication protocols, which are
generally variations of EAP (Extensible Authentication Protocol). An authentication server (RADIUS server) is used for the latter
authentication method, which is rarely used for private applications. Your administrator can give you the information you require to
configure this authentication method. The pre-shared key method is more common and offers a high degree of security.
To use WPA encryption, select WPA-PSK under Authentication type and
TKIP or AES under Encryption.
Now enter the code used in the WPA preshared key fi eld.
The code entered must be absolutely identical with that used in the net-
work. It must be min. 8 and max. 63 random characters for ASCII. Letters
(A-Z), numbers and punctuation marks can be used. 64 characters are
required for HEX, whereby only characters from 0-9 and a-f can be used.
If you do not have this code, it can be found in your router/access point or
you can ask the person responsible for these devices. Save the settings
and click OK.
15
9. Support and contact information
If products are defective:
Please contact your dealer or Hama Product Consulting if you have any product claims.
Internet / World Wide Web:
Product support, new drivers or product information can be found at www.hama.com
Support Hotline – Hama Product Consulting:
Tel. +49 (0) 9091 / 502-115
Fax +49 (0) 9091 / 502-272
E-mail: [email protected]
Note:
This product may only be used in Germany, Austria, Switzerland, France, England, Belgium, Spain, Holland, Italy, Denmark, Hungary,
Poland, Sweden, Portugal, Luxemburg, Ireland, Greece, the Czech Republic, Slovakia and Finland.
See www.hama.com for the declaration of conformity with R&TTE Directive 99/5/EC.
!
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
