Sage the 3X Bluicer Guida utente

EN QUICK GUIDE DE KURZANLEITUNG

FR GUIDE RAPIDE NL SNELSTARTGIDS

ES GUÍA RÁPIDA

IT GUIDA RAPIDA

PT MANUAL RÁPIDO

the 3X Bluicer Pro™

BJB815/SJB815

2

SAGE®

RECOMMENDS

SAFETY FIRST

At Sage® we are very safety

conscious. We design and

manufacture consumer

products with the safety of

you, our valued customer,

foremost in mind. In addition

we ask that you exercise a

degree of care when using

any electrical appliance

and adhere to the following

precautions.

IMPORTANT

SAFEGUARDS

READ ALL INSTRUCTIONS

BEFORE USE AND SAVE FOR

FUTURE REFERENCE

• Before using the rst time ensure

your electricity supply is the

same as shown on the label on

the underside of the appliance.

This appliance is equipped with

a power cord having a grounding

wire with a grounding plug. The

appliance must be grounded

using a properly grounded outlet.

In the event of an electrical

fault, grounding reduces the

risk of electrical shock.

• Do not, under any

circumstances, cut or remove

the third (ground) prong from the

power cord or use an adapter.

• Consult a qualied electrician if

the grounding instructions are

not completely understood, or

if doubt exists as to whether the

appliance is properly grounded.

• The installation of a residual

current safety switch is

recommended to provide

additional safety when using

all electrical appliances.

Safety switches with a rated

operating current not more

than 30mA are recommended.

Consult an electrician for

professional advice.

• Remove and discard

any packaging materials

safely, before rst use.

• To eliminate a choking hazard

for young children, discard

the protective cover tted

to the power plug safely.

2 Sage® Recommends Safety First

6 Components

7 Assembly

10 Functions

12 Care & Cleaning

14 Troubleshooting

16 Guarantee

Contents

3

EN

• Always ensure the appliance

is properly assembled, as per

instructions, before use. Using

the appliance without being

properly assembled may cause

product malfunction, product

damage or pose safety risk

including personal injury.

• This appliance is for household

use only. Do not use the

appliance for anything other

than its intended purpose. Do

not use in moving vehicles or

boats. Do not use outdoors.

Misuse may cause injury.

• Position the appliance on a

stable, heat resistant, level, dry

surface away from the counter

edge, and do not operate on

or near a heat source such as

a hot plate, oven or gas hob.

• Fully unwind the power

cord before operating.

• Do not let the power cord

hang over the edge of a

counter or table. Do not let

the power cord touch hot

surfaces or become knotted.

• Do not leave the appliance

unattended when in use.

• If the appliance is to be left

unattended, cleaned, moved,

assembled or stored, always

switch o the appliance by

pressing the ON | OFF button

to OFF. Switch o and unplug

from the power outlet.

• Turn the appliance OFF, then

unplug from the outlet when not

in use, before assembling or

disassembling parts and before

cleaning. To unplug, grasp the

plug and pull from the outlet.

Never pull from the power cord.

• Regularly inspect the power

cord, plug and actual appliance

for any damage. If found to

be damaged in any way,

immediately cease use of

the appliance and return the

entire appliance to the nearest

authorised Sage Service

Centre for examination,

replacement or repair.

• Keep the appliance and

accessories clean. Follow

the cleaning instructions

provided in this book. Any

procedure not listed in this

instruction booklet should be

performed at an authorised

Sage® Service Centre.

• This appliance is not intended

for use by children or by persons

with reduced physical, sensory,

or mental capabilities, or lack

of experience and knowledge.

Close supervision is necessary

when any appliance is used near

children. Children should be

supervised to ensure that they

do not play with the appliance.

• Children should not play

with the appliance.

4

• Cleaning of the appliance should

not be carried out by children.

• The appliance power cord, and

any components, attachments

or accessories should be

kept out of reach of children

aged 8 years and younger.

• Never use attachments or

accessories that are not supplied

with this product or authorised

by Sage® to be used on this

product. Failing to follow this

instruction may cause product

malfunction, product damage

or even pose safety risk.

• Do not attempt to operate

the appliance by any

method other than those

described in this booklet.

• Do not move the appliance

while in operation.

• Do not operate the appliance

on an inclined surface.

• Do not push food into the

feed chute with your ngers

or other utensils. Always use

the food pusher provided.

Do not place hand or ngers

into the food chute when it is

attached to the appliance.

• Do not juice stone fruit

unless seeds and/or stones

have been removed.

• Make sure the product is turned

OFF and the stainless-steel lter

basket has stopped rotating

and the motor has completely

stopped before releasing

the safety locking arm and/

or attempting to move the

appliance, when the unit is not in

use, and before disassembling,

cleaning and storing.

• Any signicant spillage onto

the surface under or around

the appliance, or onto the

appliance itself, should be

cleaned and dried before

continuing to use the appliance.

• Be careful when handling

the stainless-steel lter

basket as the small cutting

blades at the base of the

lter basket are very sharp.

Mishandling may cause injury.

• Blender blades are sharp,

take care when handling,

emptying and cleaning the

blender jug.Remove rind from

all citrus fruit before juicing.

• Do not use the appliance

if the rotating sieve (lter

basket) or lid is damaged.

• Always make sure chute cover

is clamped securely in place

before motor is turned on.

• Do not operate without the

pulp container in place.

• Do not unfasten interlock arm

while unit is in operation.

• A representative example of the

heaviest loading anticipated for

use with this appliance is 450g

of frozen banana pieces and

1000g of milk blended on the

highest speed for 30 seconds.

5

EN

• Do not juice more than 3kg

(approximately 6 pounds)

of carrot at a time.

• Avoid putting the blender

jug on the motor base while

the motor is still spinning.

• Do not operate without any

ingredients in the jug.

• Never attempt to operate

with damaged blades, or

with utensils, or any foreign

objects inside the jug.

• Do not put the jug in extremes

of heat or cold, for example

placing a cold jug into hot

water, or vice versa.

• Lid must be rmly secured

to the jug before operation to

ensure internal contents do not

escape, spray or overow.

• Do not remove the jug

from the motor base while

blender is in use.

• Do not use blender while

OVERLOAD PROTECTION

is ashing on the LCD. If this

occurs, unplug the blender

and wait for 30 minutes until

the motor has cooled. Once

cooled, you will be able to use

the blender as usual again.

• Do not process hot or boiling

liquids. Allow to cool before

placing into the blender jug.

• To protect against electric

shock, do not immerse the

power plug, cord or appliance

in water or any liquid.

• Do not use the appliance if the

power cord, power plug, or

appliance becomes damaged

in any way. If damaged and

maintenance other than

cleaning is required please

contact Sage Customer Service

or go to sageappliances.com

The symbol shown

indicates that this appliance

should not be disposed of

in normal household waste.

It should be taken to a local

authority waste collection centre

designated for this purpose or to

a dealer providing this service.

For more information, please

contact your local council oce.

To protect against electric

shock, do not immerse the,

power base, power cord or power

plug in water or allow moisture to

come in contact with these parts.

Avoid spilling water onto the

power base’s connector. Do not

immerse the power base

for cleaning.

FOR HOUSEHOLD USE ONLY

SAVE THESE INSTRUCTIONS

6

Components

A

I

H

J

K

L

M

B

C

D

E

F

G

A. Food pusher (not dishwasher safe)

B. Juicer cover (dishwasher safe)

C. Stainless steel lter basket (dishwasher safe)

D. Filter bowl surround (dishwasher safe)

E. Interlocking safety arm

Stops motor base operating without

cover locked into place.

F. Control panel

G. Stainless steel motor base

H. Inner measuring cup (dishwasher safe)

I. 1.5 litre blending jug & lid (dishwasher safe)

J. Juicing nozzle (dishwasher safe)

Can be placed over spout to juice

directly into a cup.

K. Drip stop plug

L. Pulp container (dishwasher safe)

M. Cleaning brush

For use on stainless steel lter basket.

Rating Information

220–240V~ 50-60 Hz 1350W

7

EN

Assembly

BEFORE FIRST USE

Wash the lid, inner measuring cup, jug,

the lter bowl surround, lter basket, juicer

cover, food pusher and pulp container in

warm, soapy water with a soft cloth. Rinse

and dry thoroughly.

Place motor base on a at, dry surface

such as a countertop. Ensure that the

appliance is switched to OFF at the motor

base and the power cord is unplugged.

JUICING

1. Place lter bowl surround on

top of the motor base.

2. Align the arrows at the base of the

stainless-steel lter basket with the

arrows on the motor drive coupling and

push down until it clicks into place to

create a secure t with the motor base.

3. Place the juicer cover over the lter bowl

surround, positioning the lower part of

the feed chute over the stainless steel

lter basket.

4. Raise the safety locking arm up and

locate into the two grooves on either

side of the juicer cover.

8

5. The safety locking arm should now be in a

vertical position and locked into place on

top of the juicer cover.

6. Slide the food pusher down the food

chute by aligning the groove in the food

pusher, with the small protrusion on the

inside of the top of the feed tube.

Food

pusher

groove

Small

protrusion

inside

feed tube

7. Place the pulp container into position by

tilting and lifting the motor base slightly.

Insert the pulp container under the juicer

cover on the back ensuring the front edge

is tucked under the back lip of the lter

bowl surround and the bottom edge is

clipped into the bottom of the motor base.

8. Drip stop plug can be tted over juice

outlet nozzle. It then allows the outlet to

be plugged to prevent dripping

after juicing.

9. Fit the lid to the blender jug and position jug

under juice spout.

10. Optional: For juicing into a cup the

Juicing Nozzle can be tted onto the

juice outlet nozzle.

9

EN

BLENDING

1. With the blender jug in the upright position

place it on the motor base. The handle

of the blender can be positioned to the

left or right-hand side of the appliance.

2. Raise the safety locking arm up

and locate into the two grooves

on either side of the blender.

3. Add food or liquid into the blender jug

ensuring not to exceed the ‘MAX’ mark.

Place the blender lid rmly into position

on the top of the blender jug. Insert

the clear, inner measuring lid into the

blender lid and turn clockwise to lock

into position. The jug features a Sage®

Assist™ Lid. This allows the lid to t

tightly onto the blender jug, avoiding

displacement during operation.

4. Ensure the spout cover of the

blender lid is clipped into place and

closed. The ring pull design allows

the user to easily remove the lid

with a simple leverage action.

After appliance is assembled into blender

or juicer conguration, plug power cord

into a 220–240V power outlet and turn on.

Press the ON / OFF button to turn the

appliance on. The ON / OFF button will

illuminate. The LCD timer screen will

illuminate with ‘0:00’ displayed.

10

Functions

12345

OVERLOAD

PROTECTION

6 7 8 9 10

SOFT HARD

+

G

R

E

N

S

M

O

T

H

I

E

S

M

O

T

H

I

E

P

U

L

S

E

I

C

E

C

R

U

S

H

A

U

T

O

C

L

E

A

N

F

R

O

Z

E

N

C

O

C

K

T

A

I

L

GETTING STARTED

The ON / OFF button powers the unit into

READY mode.

PRESET PROGRAMS

BLENDING

The appliance has 5 preset functions:

Smoothie, Green Smoothie, Pulse/

Ice Crush, Auto Clean and Frozen

Cocktail. These pre-programmed cycles

automatically adjust the blending time and

speeds to optimise blending results. These

programs are only activated when your

appliance is in blender set up. They can't

be used when your appliance is set up in

juicing conguration.

Select the required function by pressing

the corresponding function button. The

unit will start to operate, and the selected

function button will illuminate. The timer

will start to count down and program will

end automatically when it reaches '0:00'.

The program and timer can be paused by

pressing the pause button. Resume by

pressing program button again, or cancel

by pressing pause again.

The program can also be canceled at any

time by pressing the ON|OFF button.

Turning the speed dial will interrupt the

program, placing the blender in manual

mode starting from Speed 1.

Smoothie

For dairy-based smoothies a combination

of speeds and pulses are designed to

combine and aerate ingredients into a

smooth and creamy texture.

Green Smoothie

For blending whole fruits/vegetables into

a smooth beverage. A combination of high-

speed proles breaks down tough bres

into very ne particles.

Frozen Cocktail

For creating ice-based cocktails and drinks

like Margaritas, Daiquiris and Slushies.

An ice crush program followed by a short

blend.

Pulse / Ice Crush

A program of continuous pulsing designed

to chop food into an even consistency or

crush ice cubes. Use the PULSE button

when the food that is being processed

is too thick or coarse to circulate within

the blender jug. The pulse program can

automatically detect when ice has been

fully crushed and ends the program early,

indicated by a series of longer pulses.

11

EN

The maximum amount of ice cubes

the blender can blend without liquid

in the jug at any one time is 1 standard

ice tray or 250g.

Auto Clean

Use to remove most of the ingredients

o the blender walls and blades. Add

2 cups warm soapy water and press the

clean button. For harder to clean, sticky

or thick ingredients, add ½ teaspoon of

dishwashing detergent for extra cleaning

power. For best results, clean the blender

jug this way immediately after use. The

Auto Clean function only cleans the

blender jug. It doesn't clean the juicer.

MANUAL OPERATION

SPEED CONTROL DIAL

Blending

Turn the Speed Control Dial clockwise

to select one of 10 speed settings

from a slow STIR through to a very

fast PULVERIZE. The timer will start

to count up, and blending will stop

when it reaches '2:00'.

Blending can be paused by pressing

pause button. Press pause button again

to cancel, or turn dial to resume blending

from Speed 1.

To stop blending, turn the Speed Control

Dial anticlockwise back to READY or press

ON|OFF button.

JUICING

Wash your selection of fruit and vegetables

to be juiced. Most fruit and vegetables

such as apples, carrots and cucumbers

will not need to be cut or trimmed to size

as these will t whole into the feed chute.

Ensure vegetables such as beets, carrots

etc. have all soil removed, are washed well

and trimmed of leaves before using.

1. Plug the power cord into your

220–240V power outlet.

IMPORTANT

Do not load feed chute with produce

before the Juicer has reached the

selected speed.

2. Turning the Juicer On

Turn dial to desired speed setting.

Use lower numbers (1–5) for soft fruits

and vegetables and higher numbers

(6–10) for hard fruits and vegetables.

See Speed Selector Guide table on the

next page to match speed and produce

type for maximum yield. "Low" range,

while it may not maximise yield of some

produce, allows you to extract juice

at a signicantly lower noise level.

3. With the motor running, place food into

the feed chute and use the food pusher

to gently guide food down. To extract

the maximum amount of juice, always

push the food pusher down slowly.

4. Full Blender Jug

You can keep juicing until the jug

is lled to max. level.

WARNING

Never use ngers, hands or utensils to

push food down the feed chute or to clear

the feed chute. Always use the food pusher

provided.

CAUTION:

sharp blades

The stainless steel lter basket contains

small sharp blades to cut and process fruit

and vegetables. Avoid touching the blades

when handling the lter basket.

12

SPEED SELECTOR GUIDE

Food Type Speed

APPLES 10

BABY SPINACH 9

BEETROOT 10

BLUEBERRIES 5

BROCCOLI 7

CABBAGE 9

CAPSICUM 9

CARROT 10

CELERY 4

CITRUS FRUITS (peeled) 1

CUCUMBER 4

GINGER 8

GRAPES (seedless) 2

HONEYDEW MELON (peeled) 3

KALE 9

KIWI (peeled) 5

MANGO (peeled, pit removed) 5

MINT 9

PEACH (pit removed) 5

PEARS 6

PINEAPPLE (peeled) 7

RHUBARB 8

SQUASH 9

STRAWBERRIES 4

TOMATOES 4

WATERMELON (peeled) 3

ZUCCHINI 6

Care & Cleaning

Ensure the motor base is turned o by

by pressing the ON / OFF button. Then

unplug the power cord.

CLEANING

1. Remove Blender Jug.

2. Disengage Locking Bar, pull

up entire Juice Collector

Assembly and take to sink.

3. Remove Pulp Container.

Empty as much pulp as possible into

bin/compost. Rinse all parts after use

(except the motor base) under running

water to clear away the majority of juice

and pulp. Wash in warm soapy water

with a soft cloth.

To avoid food drying on to the blades,

mesh or transparent parts, rinse and

wash as soon as possible after use.

PULP CONTAINER

To minimize cleaning, you can line the

pulp container with a biodegradable bag

to collect the pulp.

MOTOR BASE

Wipe down with a soft damp cloth. Do

not immerse the motor base in liquids.

CLEANING AGENTS

Do not use abrasive scouring pads or

cleaners on either the motor base or the

jug, as they may scratch the surface. Use

only warm soapy water with a soft cloth

13

EN

JUG AND LID

In order to keep your jug clean and

avoid food drying on the blades and

jug, follow the below steps as soon as

possible after use.

Rinse most of the ingredients o the

jug and lid.

Fill the jug with 500ml of warm water, t

the lid and press the AUTO CLEAN button.

If thick or sticky ingredients require extra

cleaning power add a few drops of dish

liquid detergent.

Rinse the jug and lid again and/or wash

separately in warm soapy water with

a soft cloth or bottle brush.

It is most eective to clean the jug

immediately after use.

FILTER BASKET

To ensure consistent juicing results,

always clean the lter basket thoroughly

immediately after use, using the included

brush.

If pulp is left to dry, it may clog the ne

pores of the lter mesh, which can aect

juicing performance. The lter basket can

be soaked in hot soapy water for

10 minutes, if necessary.

DISHWASHER

All parts except for the motor base and

food pusher are dishwasher safe. The

blender jug can be placed on the bottom

shelf of the dishwasher. The lid and inner

measuring cap should be washed on the

top shelf only. However, washing parts

on a regular basis in the dishwasher can

shorten the life of them due to prolonged

exposure to harsh detergents, hot water

and pressure.

Cleaning the parts in the dishwasher also

may cause parts to deteriorate so inspect

the parts regularly and stop using the

product if any signs of damage is noticed.

STUBBORN FOOD STAINS

Strong smelling foods such as garlic, sh

and some vegetables such as carrots may

leave an odour or stain on the blender

jug and lid. To remove, soak blender jug

and lid for 5 minutes in warm soapy water.

Then wash with a mild detergent and warm

water, rinse well and dry thoroughly. Store

jug with the lid o.

STORAGE

Store the appliance upright with the

blender jug assembled on the motor base,

or beside it. Do not place anything on top.

To allow air to circulate, keep the lid o.

WARNING

Oils in citrus rind can damage the

material of your blender jug if exposed

to it for a longer period. Always clean your

blender jug immediately after processing

citrus rind.

14

Troubleshooting

LCD screen turns on

but appliance doesn't

respond to controls.

• The safety locking arm may not be correctly engaged in the vertical

operating position. In this case, the LCD screen will show an animated

prompt . Check the top cover is properly aligned and the locking arm

is located rmly into the two grooves on either side of the juicer cover or

blender jug.

Food is unevenly

chopped • This can happen when too much food is being added at one time.

Try a smaller amount, and work in batches if necessary.

Food is chopped

too ne or is watery • Try blending for shorter period of time. Use the PULSE function for

better control.

Excess pulp

building up in the

stainless-steel

lter basket

• Turn the appliance o. Disassemble to scoop excess pulp o the juicer

cover.

• Reassemble and continue juicing. Alternating soft and hard ingredients

may help avoid this.

Pulp too wet

and reduced

extracted juice

• The cleaner the lter, the better the juice yield, and dryer the pulp. Be sure

to thoroughly clean the juicer as soon as possible after each use. Remove

the stainless-steel lter basket and thoroughly clean mesh walls with a

cleaning brush. Rinse the lter basket under hot water. If the ne mesh

holes are blocked, soak the basket in a solution of hot water with 10%

lemon juice to unblock the holes or wash in the dishwasher (top shelf).

This will remove excess ber build up which could be inhibiting the ow.

• Pusher force could reduce yield because it slows the motor down.

Avoid putting pressure on the food pusher when pushing ingredients

down the feed chute.

• If juicing large amounts of brous ingredients like rhubarb and pineapple,

cleaning the lter basket in between might be required.

Juice leaks between

the lter bowl

surround and

the juicer cover

• Try a slower juicing speed and push the food pusher down the feed chute

more slowly.

• Ensure there is no build up in the lter basket.

Juice sprays

out from spout • The juice is being extracted too fast; try a slower juicing speed (if possible)

and push the food pusher down the feed chute more slowly.

Juice in lter

bowl is left after

juicer stopped

• Turn the speed dial up to highest speed setting and operate for 5 seconds.

That can help moving the remaining juice into the jug.

15

EN

Motor appears to

stall during juicing • Wet pulp can build up under the juicer cover and stall the appliance if the

appliance is used excessively without cleaning. If this occurs, disassemble

and follow the cleaning instructions to clean the lter bowl surround, the

stainless-steel lter basket and the juicer cover. The appliance can also

stall if excessive force is used to push produce down the feed chute.

If this occurs, ensure that a gentler pressure is used to push produce

down the chute.

• Turn on the appliance before putting ingredients in the chute. Pressing

ingredients down before the motor reaches full speed can cause it to

stall or overload. Use gentle to moderate pressure on the pusher.

Lower pressure produces a better juice yield.

• Hard fruit and vegetables will put excess strain onto the motor if a low

speed is selected. Refer to the reference guide to determine the correct

speed for the fruit and vegetables selected for juicing.

All control panel

lights ash and

Overload Protection

displayed on

LCD screen

• This indicates motor overload protection is activated due to motor

overheating or stalling.

• To reset the protector, unplug from the power supply, then plug back in

and turn on.

• If overload protection is still displayed, unplug the appliance and leave

to cool for at least 30 minutes, then try again. The appliance must be

unplugged while cooling in order to reset properly.

• If the issue persists after allowing to cool, this indicates an internal problem.

Contact Sage Customer Service or go to www.sageappliances.com.

• Note that triggering the overload protection indicates abnormal use of

the appliance, such as too much load in the blender jug, excessive push

force when juicing or extended continuous use. Please take note of the

conditions and refer to all of the information in these instructions to avoid

this occurrence and extend the life of the appliance.

16

2 YEAR LIMITED GUARANTEE

Sage Appliances guarantees this product for

domestic use in specied territories for 2 years

from the date of purchase against defects caused

by faulty workmanship and materials. During this

guarantee period Sage Appliances will repair,

replace, or refund any defective product (at the

sole discretion of Sage Appliances).

All legal warranty rights under applicable national

legislation will be respected and will not be

impaired by our guarantee. For full terms and

conditions on the guarantee, as well as instructions

on how to make a claim, please visit

www.sageappliances.com.

Guarantee

the 3X Bluicer Pro™

DE KURZANLEITUNG

2

BEI SAGE®

STEHT SICHER

HEIT AN ERSTER

STELLE

Wir bei Sage® sind sehr

sicherheitsbewusst.

Beim Design und bei

der Herstellung denken

wir zuallererst an Ihre

Sicherheit. Wir bitten Sie,

bei der Verwendung aller

Elektrogeräte angemessene

Sorgfalt walten zu lassen

und sich an die folgenden

Vorsichtsmaßnahmen zu

halten.

HINWEISE ZUR

SICHERHEIT

BITTE ALLE ANWEISUNGEN

VOR GEBRAUCH LESEN

UND ZUM SPÄTEREN NACH

SCHLAGEN AUFBEWAHREN

• Vergewissern Sie sich vor dem

ersten Gebrauch, dass die

Netzspannung der Angabe

auf der Unterseite des Geräts

entspricht. Dieses Gerät

ist mit einem Netzkabel mit

Erdungskabel und einem

Erdungsstecker ausgestattet.

Das Gerät muss über eine

richtig geerdete Steckdose

geerdet werden. Im Falle

einer elektrischen Störung

reduziert Erdung das Risiko

eines elektrischen Schlages.

• Unter keinen Umständen darf

der dritte Stift des Steckers

(der Erdungsstift) gekürzt oder

entfernt werden, noch darf ein

Adapter verwendet werden.

• Wenden Sie sich an einen

qualizierten Elektriker, falls

Sie die Erdungsanweisungen

nicht vollständig verstanden

oder Zweifel haben, ob das

Gerät richtig geerdet ist.

• Als zusätzliche Schutzmaß-

nahme bei der Verwendung

von Elektrogeräten wird die

Installation eines Schutz- oder

Sicherheitsschalters empfohlen.

Ideal sind Sicherheitsschalter

mit einer Nennleistung von

Inhalt

2 Bei Sage® steht Sicherheit an erster

Stelle

7 Komponenten

8 Montage

12 Funktionen

15 Pege und Reinigung

17 Störungsbehebung

19 Garantie

3

DE

maximal 30 mA. Wenden

Sie sich an einen Elektriker

für fachgerechte Beratung.

• Entfernen und entsorgen Sie

alle Verpackungsmaterialien

sorgfältig, bevor Sie das

Gerät zum ersten Mal

in Gebrauch nehmen.

• Entsorgen Sie die Schutzhülle

des Netzsteckers, da diese

eine Erstickungsgefahr für

Kleinkinder darstellt.

• Vergewissern Sie sich vor dem

Gebrauch, dass das Gerät

gemäß der Anleitung richtig

zusammengesetzt wurde.

Wird das Gerät gebraucht,

obwohl es nicht ordnungsgemäß

zusammengesetzt wurde,

kann dies zu einer Fehlfunktion

des Geräts, Schäden am

Gerät oder Sicherheitsrisiken

sowie Verletzungen führen.

• Dieses Gerät ist nur für den

Hausgebrauch bestimmt.

Verwenden Sie das Gerät

ausschließlich zu seinem

Bestimmungszweck. Verwenden

Sie das Gerät nicht in fahrenden

Fahrzeugen oder Booten.

Verwenden Sie das Gerät

nicht im Freien. Fehlgebrauch

kann zu Verletzungen führen.

• Stellen Sie das Gerät auf eine

stabile, hitzebeständige, ebene,

und trockene Fläche in einem

sicheren Abstand zur Kante

und betreiben Sie es nicht

in der Nähe einer Hitzequelle,

wie beispielsweise Kochplatten,

Backöfen oder Gaskochfelder.

• Rollen Sie das Kabel vor

Inbetriebnahme ganz aus.

• Lassen Sie das Kabel nicht über

die Kante einer Arbeitsäche

oder eines Tisches hängen.

Das Netzkabel darf nicht

mit heißen Oberächen in

Berührung kommen oder

sich verknoten.

• Lassen Sie das Gerät

während des Gebrauchs

nicht unbeaufsichtigt.

• Wenn Sie das Gerät

unbeaufsichtigt stehen

lassen, reinigen, umstellen,

zusammenbauen oder

aufbewahren möchten,

müssen Sie es zuvor

ausschalten, indem Sie auf

der „ON | OFF“-Taste „OFF“

einstellen. Schalten Sie

das Gerät aus und ziehen

Sie den Netzstecker.

• Schalten Sie das Gerät

aus und ziehen Sie bei

Nichtgebrauch den Stecker,

bevor Sie Teile an-/abmontieren

oder reinigen. Um den

Stecker zu ziehen, greifen

Sie den Stecker und ziehen

Sie ihn aus der Steckdose.

Ziehen Sie zum Ausstecken

niemals am Netzkabel.

• Überprüfen Sie das

Netzkabel, den Stecker

und das Gerät regelmäßig

auf Schäden. Wenn das

4

Gerät in irgendeiner Weise

beschädigt ist, verwenden

Sie es nicht und senden Sie

es an das nächstgelegene

Sage® Service Center zur

Überprüfung, Reparatur oder

um einen Ersatz zu erhalten.

• Halten Sie das Gerät und das

Zubehör sauber. Befolgen Sie

die Reinigungsanweisungen

in dieser Broschüre. Alle nicht

in dieser Bedienungsanleitung

beschriebenen Vorgänge sind

in einem autorisierten Sage®

Service Center durchzuführen.

• Dieses Gerät ist nicht für die

Verwendung von Kindern oder

Menschen mit körperlichen,

sensorischen oder geistigen

Einschränkungen sowie

unerfahrenen oder ungeübten

Menschen geeignet. Strenge

Beaufsichtigung ist notwendig,

wenn das Gerät in der Nähe

von Kindern verwendet wird.

Um sicherzustellen, dass Kinder

nicht mit dem Gerät spielen,

sollten diese stets beaufsichtigt

werden.

• Das Gerät ist kein Spielzeug

für Kinder.

• Das Gerät sollte nicht von

Kindern gereinigt werden.

• Das Netzkabel und alle

anderen Gerätekomponenten,

Zubehörteile und Zusatzgeräte

müssen außerhalb der

Reichweite von Kindern unter

8 Jahren aufbewahrt werden.

• Verwenden Sie keine

Zubehörteile oder Zusatzgeräte,

die nicht mit dem Produkt

mitgeliefert werden oder von

Sage® für den Gebrauch mit

diesem Produkt freigegeben

sind. Nichtbefolgung dieser

Anweisung kann zu einer

Fehlfunktion des Geräts,

Schäden am Gerät oder gar

zu Sicherheitsrisiken führen.

• Versuchen Sie nicht,

das Gerät auf andere Weise

als der in dieser Anleitung

beschriebenen zu betreiben.

• Bewegen Sie das Gerät nicht,

während es in Betrieb ist.

• Betreiben Sie das Gerät nicht

auf einer geneigten Fläche.

• Füllen Sie den Einfüllschacht

nicht mit bloßen Fingern

oder anderen Hilfsmitteln.

Verwenden Sie dazu

immer den mitgelieferten

Speiseschieber. Greifen Sie

nicht mit Händen oder Fingern

in den Einfüllschacht, wenn

dieser am Gerät befestigt ist.

• Entsaften Sie Kernobst nur,

wenn die Samen und Kerne

zuvor entfernt wurden.

• Vergewissern Sie sich bei

Nichtgebrauch und vor dem

Auseinanderbauen, Reinigen

und Verstauen des Geräts,

dass es ausgeschaltet ist,

der Siebeinsatz aus Edelstahl

sich nicht mehr dreht und der

Motor nicht mehr läuft, bevor

La pagina si sta caricando...

Sage the 3X Bluicer Guida utente

Questo manuale è adatto anche per

Sage the 3X Bluicer Guida utente

in altre lingue

Documenti correlati

Altri documenti