Kenwood DMX 8021 DABS Manuale utente

The product with the Hi-Res Audio logo

is conformed to Hi-Res Audio standard

defined by Japan Audio Society.

The logo is used under license from Japan

Audio Society.

MONITOR WITH RECEIVER

DMX8021DABS

INSTRUCTION MANUAL

• Updated information (the latest Instruction Manual, system updates, new

functions, etc.) is available from

<https://www.kenwood.com/cs/ce/>.

• The Instruction manual is subject to change for modification of

specifications and so forth. Be sure to download the latest edition of the

Instruction manual for reference.

<https://www.kenwood.com/cs/ce/>

2

Important Notice on Software

Ñ Software License on This

Product

The software embedded in this product

comprises a number of independent software

components, each of which is copyrighted by

JVCKENWOOD Corporation or by a third party.

This product uses software components that

are based on an End-User License Agreement

(hereinafter called “EULA”) stipulated by

JVCKENWOOD Corporation and by third parties.

The EULA dictates the availability of the source

codes of free-software components as a

prerequisite to distributing them in executable

form under the terms of the GNU General

Public License or the Lesser General Public

License (hereinafter called “GPL/LGPL”). To get

information about the software components

that are subject to the terms of the GPL/LGPL,

please visit the following Website:

Website URL https://www2.jvckenwood.com/gpl/

Queries concerning the contents of the source

code or the like will not be accepted.

Please note that software components based

on a EULA that is not subject to the terms of the

GPL/LGPL or those that have been developed

or created by JVCKENWOOD Corporation will

be excluded from the scope of source code

disclosure.

Because licenses to use software components

distributed under the GPL/LGPL are offered to

the customers for free of charge, no warranty is

granted to the customers, whether explicitly or

implicitly, to the extent of the applicable laws.

Unless otherwise stipulated by the applicable

laws or agreed upon in writing, the copyright

holders or those who are entitled to modify

and redistribute the software components are

not held responsible for any and all damages

resulting from their use or from inability to use

them. For more information about the terms of

use of the software components, required items

of compliance and so on, please refer to the

GPL/LGPL.

Customers wishing themselves to use a software

component that is subject to the GPL/LGPL

embedded in this product are encouraged to

read the terms of the corresponding license

before use. Because each individual license

is prescribed by a third party other than

JVCKENWOOD Corporation, the original (English)

of the license is presented.

EULA

Ñ Software License Agreement

JVCKENWOOD Corporation (hereinafter called

“Licensor”) holds either the copyright to the

embedded software or the right to sublicense

it. This agreement establishes the conditions

under which the customer uses this “Licensed

Software.”

The customer shall agree to the terms of this

license agreement before proceeding to use

Licensed Software.

This agreement is deemed to have taken effect

when the customer (hereinafter called “User”)

has used a product implementation of Licensed

Software.

The Licensed Software may contain software

Licensor has been licensed to use by third

parties directly or indirectly. Some third parties

may have terms of use prescribed for their

customers, apart from this Software License

Agreement. This agreement does not apply to

such software. Be sure to consult “Important

Notice on Software” as presented separately.

Article 1 (General)

Licensor grants to User a non-exclusive,

non-assignable right of use Licensed Software

within the country where the User purchases

the Product (hereinafter the "Country") (except

for the exception provided for in Paragraph 1,

Article 3).

Article 2 (Right of Use)

1. The rise of use granted under this agreement

is the right to use Licensed Software in this

product.

2. User may not duplicate, copy, modify, add to,

translate or otherwise alter, or loan licensed

Software and the associated literature in

whole or in part.

3. Use of Licensed Software is limited to a

private extent, and Licensed Software may

not be distributed, licensed or sublicensed

for any purposes whatsoever, including

commercial use.

4. User shall use Licensed Software as per the

instruction manual or instructions given in the

help file and may not use or duplicate data in

violations of the regulations of the Copyright

Law or other governing laws by using

Licensed Software in whole or in part.

3

Article 3 (Terms of License)

1. In assigning this product, User may not retain

the original copy of the embedded Licensed

Software (including associated literature,

updates and upgrades) and any duplicates

and associated literature with regard to

the license to use Licensed Software. User

may transfer Licensed Software only to the

condition of binding the assignee to abide by

the terms of this Software License Agreement.

2. User may not reverse-engineer, disassemble,

decompile or otherwise analyze the source

code of Licensed Software.

Article 4 (Rights to Licensed Software)

All rights to Licensed Software and the

associated literature, including copyrights, shall

reside with Licensor or

the original right holder who has granted the

Right of Use and right to sublicense to Licensor

(hereinafter referred to as “Original Right

Holder”), and User does not have any rights

other than Right of Use granted hereunder

with regard to Licensed Software and the

associated literature.

Article 5 (Exemption Granted to Licensor)

1. Licensor and Original Right Holder do not

assume any responsibility for damages

caused to User or third parties resulting from

the exercise by User of the license granted

hereunder, unless otherwise provided by any

law to the contrary.

2. Licensor does not warrant Licensed Software

to be merchantable, compatible and fit for

specific purposes.

Article 6 (Responsibility for Third Parties)

If disputes over the infringement of third

parties’ intellectual property rights, such as

copyrights and patent rights, arise out of the

use of Licensed Software by User, User shall

resolve these disputes at User’s own expenses

while keep Licensor and Original Right Holder

harmless.

Article 7 (Secrecy Obligation)

User shall keep confidential Licensed Software

provided hereunder, information contained in

the associated literature or the like and those

provisions of this agreement not yet in public

knowledge and may not disclose or leak these

to third parties without prior written consent

from Licensor.

Article 8 (Cancellation of the Agreement)

Licensor reserves the right to cancel this

agreement forthwith and claim compensation

from User for the damages caused by such

cancellation when User:

(1) Breaches any of the provisions of this

agreement, or

(2) Has received a petition for seizure, provisional

seizure, provisional disposition or any other

kind of compulsory execution.

Article 9 (Destruction of Licensed Software)

If this agreement is terminated under the

provision of the foregoing paragraph, User

shall destroy Licensed Software, along with all

associated literature and its duplicates, within

two (2) weeks from the date of termination.

Article 10 (Copyright Protection)

1. Copyrights and all other intellectual property

rights relating to Licensed Software shall

reside with Licensor and Original Right Holder

and in no circumstances with User.

2. User shall abide by the laws relating to

copyrights and intellectual property rights in

using Licensed Software.

Article 11 (Export Control)

1. Licensed Software and the associated

literature or the like may not be exported

to places outside the Country (including

transmission outside the Country over the

Internet or the like).

2. User agrees that Licensed Software is subject

to export controls imposed by the Country

and the United States of America.

3. User agrees to comply with all the

international and domestic laws that apply

to this software (U.S. Export Administration

Regulations and regulations established by

the U.S., the Country and their governmental

agencies regarding usage by end users and

export destinations).

Article 12 (Miscellaneous)

1. Even if this agreement is invalidated in part by

law, all other provisions shall remain in effect.

2. Licensor and User shall consult each other in

good faith to resolve any matters not provided

for in this agreement or questions arising from

the interpretation of this agreement.

3. Licensor and User agree that this agreement

is governed by the law of Japan and that all

disputes involving claims and obligations that

may arise out of this agreement will be settled

by arbitration at the Tokyo District Court as the

court of first instance.

4

Contents

Before Use 6

Precautions ................................................................... 6

How to read this manual .........................................6

Basic Operations 7

Functions of the Buttons on the Front Panel ... 7

Turning on the Unit ................................................... 8

Initial Settings .............................................................. 8

Adjusting the volume .............................................10

Touch screen operations .......................................11

Display the HOME screen ......................................11

Popup menu ..............................................................12

Source selection screen description .................. 12

Source control screen descriptions ...................14

List screen ...................................................................15

Widget 17

Widget ..........................................................................17

Multi Widget ...............................................................17

Weather Widget ........................................................19

Photo Frame Widget ...............................................19

Importing Image Files.............................................20

Widget SETUP ............................................................20

APPS 21

Wireless Mirroring Operation ...............................21

Apple CarPlay Operation .......................................21

Android Auto Operation ........................................ 23

KENWOOD Traffic Powered By INRIX .................25

USB 26

Connecting a USB device ......................................26

USB Basic Operation ................................................26

Search Operation ......................................................28

iPod/iPhone 29

Preparation .................................................................29

iPod/iPhone Basic Operation ...............................30

Search Operation ......................................................31

Radio 32

Radio Basic Operation ............................................32

Memory Operation ..................................................33

Selecting Operation ................................................34

Traffic Information ...................................................34

Radio SETUP ...............................................................35

Digital Radio 36

Digital Radio Basic Operation ..............................36

Storing Service in Preset Memory ......................37

Selecting Operation ................................................37

Traffic Information ...................................................38

Digital Radio SETUP ................................................. 39

Bluetooth Control 40

Information for using Bluetooth® devices .......40

Register the Bluetooth device .............................41

Playing the Bluetooth Audio Device .................44

Using the Hands-Free Unit .................................... 46

Hands-Free Setup ..................................................... 51

Other External Components 52

View Camera ..............................................................52

Use Dashboard Camera..........................................55

External audio/video players ...............................55

HDMI source ...............................................................55

5English

Setup 56

Monitor Screen Setup ............................................. 56

System Setup .............................................................56

User Interface Setup ................................................ 57

Special Setup .............................................................58

Display Setup .............................................................58

AV Setup ......................................................................60

Connection Setup ....................................................60

Controlling Audio 62

3-way speaker system setup ................................62

Speaker / X’over setup ............................................63

Controlling General Audio ....................................65

Equalizer Control ......................................................65

Volume Offset ............................................................ 66

Sound Effect ...............................................................67

Listening Position / DTA .........................................68

Audio Setup memory .............................................69

Remote control 70

Battery Installation ...................................................70

Functions of the Remote control Buttons .......70

Connection/Installation 73

Before Installation ....................................................73

Installing the unit .....................................................74

Troubleshooting 82

Problems and Solutions .........................................82

Error Messages ..........................................................82

Appendix 84

Playable Media and Files........................................84

Specifications ............................................................. 85

About this Unit ..........................................................88

Before Use

6

Before Use

Precautions

# WARNINGS

Ñ To prevent injury or fire, take

the following precautions:

• To prevent a short circuit, never put or leave

any metallic objects (such as coins or metallic

tools) inside the unit.

• Do not watch or fix your eyes on the unit’s

display when you are driving for any extended

period.

• If you experience problems during installation,

consult your KENWOOD dealer.

Ñ Precautions on using this unit

• When you purchase optional accessories,

check with your KENWOOD dealer to make

sure that they work with your model and in

your area.

• You can select a language to display menus,

audio file tags, etc. See User Interface Setup

(P.57).

• The Radio Data System feature won’t work in

areas where the service is not supported by

any broadcasting station.

Ñ Protecting the monitor

• To protect the monitor from damage, do not

operate the monitor using a ball point pen or

similar tool with a sharp tip.

Ñ Cleaning the unit

• If the faceplate of this unit is stained, wipe it

with a dry soft cloth such as a silicon cloth.

If the faceplate is stained badly, wipe it with

a cloth moistened with neutral cleaner, then

wipe it again with a clean soft dry cloth.

NOTE

• Applying spray cleaner directly to the unit

may damage its mechanical parts. Wiping the

faceplate with a hard cloth or using a volatile

liquid such as thinner or alcohol may scratch the

surface or erase the screened print.

Ñ Acquiring GPS signal

The first time you turn on this unit, you must

wait while the system acquires satellite signals

for the first time. This process could take up

to several minutes. Make sure your vehicle

is outdoors in an open area away from tall

buildings and trees for fastest acquisition.

After the system acquires satellites for the first

time, it will acquire satellites quickly each time

thereafter.

Ñ About GLONASS

This unit uses Global Navigation Satellite System

(GLONASS) in addition to GPS.

Combining GPS and GLONASS can refine

positioning accuracy than using GPS only.

Ñ Caution for Smartphone Users

Simultaneously running multiple applications

on your smartphone while screen sharing places

heavy demand on the microprocessor of the

phone, potentially affecting communication and

performance.

For best results while pairing with your

KENWOOD receiver, please be sure to close any

unused applications.

How to read this manual

• The screens and panels shown in this

manual are examples used to provide a clear

explanation of operations.

For this reason, they may be different from

the actual screens or panels, or some display

patterns may be different from the actual ones.

• Display language: English is used for the

purpose of explanation. You can select a

display language from the [SETUP] menu. See

User Interface Setup (P.57).

This symbol on the product means

there are important operating and

maintenance instructions in this

manual.

Be sure to carefully read

instructions in this manual.

Basic Operations

7English

Basic Operations

Functions of the Buttons on the Front Panel

1 2 3 4 5 6 7

NOTE

• The panels shown in this manual are examples used to provide a clear explanation of operations. For this reason,

they may be different from the actual panels.

Number Name Motion

1

Remote

Sensor

• Receives the remote control signal.

2

S, R

(Volume)

• Adjusts the volume.

The volume will go up to 15 when you keep pressing R. (P.10)

3

AT T • Switches attenuation of the volume on/off.

4

HOME • Displays the HOME screen (P.11).

• Pressing for 1 second turns the power off.

• When the power is off, turns the power on.

5

MENU • Displays the popup menu screen.

• Pressing and holding turns the screen off.

6

• Displays the APP (Apple CarPlay/Android Auto/Wireless Mirroring) screen.

• Pressing and holding displays the Voice Recognition screen (P.48).

• When neither Apple CarPlay, Android Auto, nor a Bluetooth Hands-Free phone is

connected, pressing and holding displays Bluetooth pairing waiting dialog. (P.41)

7

CAM • Switches view camera display on/off. (P.52)

The camera whose view is displayed first changes according to the "Camera

Setup" setting and the shift lever position in the shift gate. The camera whose view

was displayed last is kept and the same camera view will be displayed the next

time. If its assignment setting is changed, the rear camera view is displayed.

Basic Operations

8

Turning on the Unit

1

Press the [HOME] button.

 The unit is turned on.

●To turn off the unit

1

Press the [HOME] button for 1 second.

NOTE

• If it is your first time to turn the unit on after

installation, it will be necessary to perform Initial

SETUP (P.8).

Initial Settings

Initial SETUP

Perform this setup when you use this unit first

time.

1

Set each item as follows.

■[Language]

Select the language used for the control

screen and setting items. Default is "British

English(en)”.

1 Touch [Language].

2 Touch [Language Select].

3 Select the desired language.

4 Touch [

].

For details, see User Interface Setup

(P.57).

■[Clock]

Sets the synchronization of the clock and

adjusts it.

For detailed operation, see Date and clock

settings (P.10).

■[Display]

Set the key illumination color.

If it is hard to see the image on the screen

even, adjust the viewing angle.

1 Touch [Display].

2 Touch [Key Colour].

3 Select the desired color.

4 Touch [

].

5 Touch [Viewing Angle].

6 Select a viewing angle.

7 Touch [

].

For details, see Display Setup (P.58).

■[Camera]

Set the parameters for the camera.

1 Touch [Camera].

2 Set each item and touch [

].

For details, see Camera Setup (P.52).

■[DEMO]

Set the demonstration mode. Default is “ON”.

2

Touch [Finish].

NOTE

• These settings can be made from the SETUP

menu. See Setup (P.56).

Basic Operations

9English

Security Code Setup

You can set up a security code to protect your

receiver system against theft.

When the Security Code function is activated,

the code cannot be changed and the function

cannot be released. Note the Security Code

can be set as the 4 to 8 digit number of your

choice.

Preparation

• Set [DEMO] to [OFF] in the Special screen

(P.58).

1

Press the [MENU] button.

 Popup menu appears.

2

Touch [SETUP].

 SETUP Menu screen appears.

3

Touch [Security].

 Security screen appears.

4

Touch [Security Code Set] on the Security

screen.

 Security Code Set screen appears.

5

Enter a security code with 4 to 8 digit

number and touch [Enter].

6

Enter the same code again and touch

[Enter].

Now, your security code is registered.

NOTE

• Touch [BS] to delete the last entry.

• If you enter a different security code, the screen

returns to step 5 (for the first code entry).

• If you have disconnected the Receiver from

battery, enter the correct security code as that

you have entered in step 5 and touch [Enter]. You

can use your receiver.

To change the security code

1

Touch [Security Code Change] on the

Security screen.

 Security Code Set screen appears.

2

Enter the current registered security code

and touch [Enter].

3

Enter a new security code with 4 to 8

digit number and touch [Enter].

4

Enter the same code again and touch

[Enter].

The new security code is registered.

To clear the security code

1

Touch [Security Code Cancellation] on

the Security screen.

 Security Code Set screen appears.

2

Enter the current registered security code

and touch [Enter].

The security code is cleared.

Basic Operations

10

Date and clock settings

1

Press the [MENU] button.

 Popup menu appears.

2

Touch [SETUP].

 SETUP Menu screen appears.

3

Touch [User Interface].

 User Interface screen appears.

4

Set each item as follows.

Scroll the page to show hidden items.

■[Time Format]

Select the time display format.

[12-Hour]/[24-Hour] (Default)

■[Clock]

[GPS-SYNC] (Default): Synchronizes the clock

time with the GPS.

[Manual]: Set the clock manually.

■[Time Zone]

Select the time zone.

■[Clock Adjust]

If you select [Manual] for Clock, adjust the

date and time manually. (P.10)

NOTE

• Please set the date and time. If they are not set,

some functions may not work.

Adjust the date and time manually

1

Touch [Clock] on the User Interface

screen.

2

Select [Manual].

3

Touch [Time Zone] on the User Interface

screen.

4

Select the time zone.

5

Touch [Clock Adjust] on the User

Interface screen.

6

Adjust the date, then adjust the time.

7

Touch [Set].

Adjusting the volume

You can adjust the volume (0 to 40).

Press [R] to increase, and press [S] to decrease.

Holding [R] increases the volume continuously

to level 15.

Basic Operations

11English

Touch screen operations

To perform operations on the screen, you need

to touch, touch and hold, flick or swipe to

select an item, display a setting menu screen

or change pages.

●Touch

Touch the screen gently to

select an item on the screen.

●Touch and hold

Touch the screen and keep

your finger in place until

the display changes or a

message is displayed.

●Flick

Slide your finger quickly

to the left or right on the

screen to change the page.

You can scroll a list screen

by flicking up/down on the

screen.

●Swipe

Slide your finger up or down

on the screen to scroll the

screen.

Display the HOME screen

1

Press the [HOME] button.

 HOME screen appears.

HOME screen descriptions

Most functions can be performed from the

HOME screen.

1

3

2

1

• Widget (P.17)

– You can change the widget by flicking left

or right on the widget area.

– Touch the widget to display the detailed

screen.

2

• Displays the source selection screen. (P.12)

3

• Short-cut playback source icons (P.13)

Basic Operations

12

Popup menu

1

Press the [MENU] button.

 Popup menu appears.

2

Touch to display the popup menu.

1

The contents of the menu are as follows.

• Displays the Screen Adjustment screen.

(P.56)

• Turns the display off. (P.12)

• Displays the view camera screen.

(P.52)

• Displays the SETUP Menu screen.

(P.56)

• Displays the Audio screen. (P.62)

• Displays the control screen of current

source. Icon feature differs depending on

the source. This icon is for USB source.

• Close the popup menu.

• Displays the Device List screen. (P.41)

1

• Short-cut source icons: The source

changes to the one you have set with a

short-cut. For the short-cut setting, refer

to Customize Short-cut source icons on

HOME screen (P.14).

Turn off the screen

1

Select [Display OFF] on the popup menu.

NOTE

• Touch the display to turn on the screen.

• To display the clock while the screen is off, it is

necessary to set "OSD Clock" to "ON". (P.58)

Source selection screen

description

You can display icons of all playback sources

and options on the source selection screen.

4 5

3

2

1

• Changes playback sources.

For playback sources, see Select the

playback source (P.12).

2

• Page indication*1

3

• Changes pages. (Touch []/[ ].)

You can also change pages by flicking left or

right on the screen.*1

4

• Returns to the previous screen.

5

• Displays the SETUP Menu screen. (P.56)

*1 This is displayed when icons are placed across

multiple pages.

Select the playback source

1

Press the [HOME] button.

 HOME screen appears.

Basic Operations

13English

2

Touch [ ].

From the screen, you can select the

following sources and functions.

• Switches to the Apple CarPlay screen

from the connected iPhone. (P.21)

• Switches to the Android Auto screen

from the connected Android™

smartphone. (P.23)

• Displays the Hands-Free screen. (P.46)

When neither Apple CarPlay, Android

Auto, nor a Bluetooth Hands-Free phone

is connected, displays Bluetooth pairing

waiting dialog.*1 (P.41)

• Switches to the Radio broadcast.

(P.32)

• Switches to the Digital Radio broadcast.

(P.36)

• Plays a Bluetooth audio device. (P.44)

• Plays an iPod/iPhone. (P.29)

• Plays files on a USB device. (P.26)

• Plays a device connected to the HDMI

input terminal. (P.55)

• Switches to an external component

connected to the AV Audio input and the

VIDEO input terminal.*2 *3 (P.55)

• Switches to the Wireless Mirroring

screen from the connected Android™

smartphone. (P.21)

• Puts the unit in standby. (P.13)

*1 When connecting as Apple CarPlay or Android Auto,

it works as a phone provided in Apple CarPlay or

Android Auto. If Apple CarPlay or Android Auto are

connected during talking by the Bluetooth device,

the current call will be continued.

*2 You can use the [AV-IN] source when a cable from

a visual source except a camera is connected to the

VIDEO input terminal, and a cable is connected to

the AV Audio input terminal. (P.79)

*3 This can be selected when the AV-IN is set to [NONE]

on the Camera Assignment Setting screen. (P.53)

To select the playback source on the

HOME screen

The 4 items displayed in the bottom row on

the source selection screen are shown on the

HOME screen.

You can change the items displayed on this

area by customizing the source selection

screen. (P.14)

To select the playback source on the

source control screen

Display source selection icons by touching

[

]/[ ] or flicking left or right on the source

control screen, then select a playback source.

Put the unit in standby

1

Press the [HOME] button.

 HOME screen appears.

2

Touch [ ].

3

Touch [STANDBY].

Basic Operations

14

Customize Short-cut source icons

on HOME screen

You can arrange the positions of the source

icons as you like.

1

Press the [HOME] button.

 HOME screen appears.

2

Touch [ ].

3

Touch and hold the icon which you want

to move in the customizing mode.

4

Drag the icon to the desired position.

Changes the page

Source control screen

descriptions

There are some functions which can be

performed from most screens.

Indicators

5

6

1 2

3

4

7

Short-cut source icons

1

All sources icon

Displays the source selection screen. (P.12)

2

Secondary screen

• [

]/[ ] : The Secondary screen changes to

another one every time you touch it. You can

also change the Secondary screen by flicking

left or right on the screen.

• Indicators: Displays the current source

condition and so on.

– [ATT]: The attenuator is active.

– [MUTE]: The mute function is active.

– [LOUD]: The loudness control function is active.

• Short-cut source icons: The source changes to

the one you have set with a short-cut. For the

short-cut setting, refer to Customize Short-

cut source icons on HOME screen (P.14).

3

Content list

Displays the track/file/station/channel list.

4

• Connected Bluetooth device information.

Basic Operations

15English

5

Artwork & information

You can select whether to display an artwork

and song information or only song information

in more detail.

Touching the artwork area switches to the VU

meter. (The USB, iPod, Bluetooth audio, Digital

Radio sources only)

Change the text size of song information when

the "Small Audio Text" is set to "ON"/"OFF" in the

User Interface screen (P.57).

6

Function panel

Touch the left side of the screen to display the

function panel. Touch again to close the panel.

7

Operation keys

You can operate the current source with these

operation keys. The available functions are

different depending on the source type.

List screen

There are some common function keys in the

list screens of most sources.

The operation and the display screen are

different for each source. (P.28, 31, 45)

Display the list screen

For USB/iPod:

1

Touch [1] or the item listed on the

information area in the source control

screen.

 The list screen appears.

For Bluetooth audio:

1

Touch [1].

 The list screen appears.

61 2

3 4 5

1

Displays the list type selection window.

2

Displays a music/movie file list.

3

Text scroll

Scrolls the displayed text.

Basic Operations

16

4

etc.

Keys with various functions are displayed here.

• : Plays all tracks in the folder containing

the current track.

• : Jumps to the letter you entered

(alphabetical search).

• : Moves to the upper hierarchy

level.

5

[ ]/[ ]/[ ]/[ ] Page scroll

You can change pages to display more items by

touching [

]/[ ].

• [

]/[ ] : Displays the top or bottom page.

6

Return

Returns to the previous screen.

NOTE

• Depending on the current source or mode, some

function key may not appear.

Widget

17English

Widget

1 Press the [HOME] button.

2 You can change the widget by flicking left

or right on the widget area.

Widget list

• Weather Widget *1

• Multi Widget *2

• Clock Widget

• Tire Pressure Widget *3

• Climate Widget *3

• Photo Frame Widget

*1 You can receive INRIX weather forecast by

connecting your iPhone or Android smartphone

in which the “KENWOOD Traffic Powered By INRIX”

application is installed.

*2 Up to 3 pages can be set to the multi widget screen.

*3 This can be selected when a commercial adaptor is

connected.

Multi Widget

You can place a widget on each of the

following areas. Up to 4 widgets can be placed

per a multi widget screen.

1 Press the [HOME] button.

2 Flick the widget area to the left/right to

display the multi widget.

1

2

3

4

1

Widget (L)

2

Widget (M)

3

Widget (S1)

4

Widget (S2)

Ñ Replace the widget

●To move the widget

1 Touch and hold the widget.

 Widget customize mode is activated.

2 Drag the widget to the desired position.

●To delete the widget

1 Touch and hold the widget.

 Widget customize mode is activated.

2 Touch [] on the right top corner of the

widget.

 The selected widget is deleted.

Widget

18

●To replace the widget

1 Touch [ ] on the multi widget screen.

1

 Widget list popup appears.

1

Widget icon

The widgets which can be placed to the multi

widget screen are listed.

2 Flick the widget list popup to the left/

right to select the widget to replace.

3 Touch and hold the new widget.

 Widget customize mode is activated.

4 Drag the widget from the widget list

popup to the desired widget area.

You can set up following items.

• Clock Widget

• Weather Widget *1

• Current source information *2

• Visualizer Widget

• Mirroring Widget *3 *4

• Photo Frame Widget

• Climate Widget *5

• Tire Pressure Widget *5

*1 You can receive INRIX weather forecast by

connecting your iPhone or Android smartphone

in which the “KENWOOD Traffic Powered By INRIX”

application is installed.

*2 You cannot display the screen of Wireless Mirroring

on this widget. To display the screen of the source,

select the Mirroring Widget.

*3 This can be selected when using Wireless Mirroring.

*4 You cannot play the video file on the USB device

when using Wireless Mirroring.

*5 This can be selected when a commercial adaptor is

connected.

NOTE

• [ ] and the widget list popup disappear when no

operation is done for 5 seconds.

• When the screen is switched from another widget

to multi widget screen, [

] appears again.

Ñ Add a new multi widget

You can add pages to the multi widget screen.

1 Touch [ ] on the multi widget screen.

 Widget list popup appears.

■[ ]

Displays confirmation message to delete the

current page from the multi widget screen.

For details, see To delete the multi widget

(P.18).

■[

]

Adds a page to the multi widget screen.

2 Touch [ ] on the widget list popup.

 A new page is added.

NOTE

• You can add up to pages to the 2 multi widget

screen. If you have already added 2 pages, you

cannot select [

].

• The widget tray is displayed on the new page

until you place a widget to.

To delete the multi widget

1 Touch [ ] on the widget list popup.

 Confirmation message appears.

2 Touch [Ye s ].

 Current page is deleted.

NOTE

• You cannot delete the first page of the multi

widget screen.

Widget

19English

Weather Widget

You can display the weather forecast of the

present location on the Home screen.

Preparation

• See KENWOOD Traffic Powered By INRIX

(P.25).

• Select “ON” for Weather Widget. See Widget

SETUP (P.20).

1 Press the [HOME] button.

2 Flick the widget area to the left/right to

display the weather widget.

Photo Frame Widget

You can display a slideshow of the image files

stored in your iPhone or Android smartphone

on the Home screen.

Ñ Preparation

• See Importing Image Files (P.20).

• Select “ON” for Photo Frame Widget. See

Widget SETUP (P.20).

Ñ Photo Frame

1 Press the [HOME] button.

2 Flick the widget area to the left/right to

display the photo frame widget.

• To scroll the screen to display the hidden part,

select “ON” for [Photo Frame Scroll]. See

Widget SETUP (P.20).

Widget

20

Importing Image Files

You can display image files stored in your

iPhone or Android smartphone by connecting

your iPhone or Android smartphone in which

the “KENWOOD Portal APP” application is

installed to this unit.

The image files are displayed on the photo

frame widget. Also, you can set an image as

the wallpaper.

See Photo Frame Widget (P.19) and To

register an original image (P.59).

Preparation

• Install the latest version of the “KENWOOD Portal

APP” application on your iPhone or Android

smartphone.

– iPhone: Search for “KENWOOD Portal APP” in

the Apple App Store to find and install the

most current version.

– Android smartphone: Search for “KENWOOD

Portal APP” on Google Play to find and install

the most current version.

• For details, see “KENWOOD Portal APP”

application.

1 Connect the device.

• To connect a device via Bluetooth,

register it as the Bluetooth device and

do the App (SPP) profile setting of the

connection beforehand. See Register the

Bluetooth device (P.41) and Switch

the connected device (P.42).

• Connect an iPhone via the USB terminal.

(P.80)

2 Unlock your device.

Widget SETUP

Set up the widgets on the Home screen.

1 Press the [MENU] button.

 Popup menu appears.

2 Touch [SETUP].

 SETUP screen appears.

3 Touch [User Interface].

 User Interface screen appears.

4 Touch [Widget SETUP] in the User

Interface screen.

5 Set each item as follows.

■[Weather Widget]

Determine whether to use the weather

widget.

"ON" (Default)/"OFF"

■[Photo Frame Widget]

Determine whether to use the photo frame

widget.

"ON" (Default)/"OFF"

■[Photo Frame Scroll]

Select whether to use the scroll function on

the photo frame widget.

[ON] (Default): You can see the image scrolled

up/down/left/right when the image is larger

than the screen.

[OFF]: The screen displays only in center of

the image when the image is larger than the

screen.

6 Touch [ ].

La pagina sta caricando ...

Kenwood DMX 8021 DABS Manuale utente

Kenwood DMX 8021 DABS Manuale utente

in altre lingue

Documenti correlati

Altri documenti