VTech ErisTerminal VSP861 Manuale utente

ErisTerminal® SIP Deskset

VSP861

User Guide

VSP861

2

3

Congratulations

on your purchase of this VTech product. Before using this product, please read

Important Safety Information on page 4 of this manual. Please thoroughly

read this user’s manual for all the feature operations and troubleshooting

information necessary to install and operate your product. You can also visit our

website at businessphones.vtech.com or call 1 (888) 370-2006.

Please note the serial number of your product, which can be found on the back

of the deskset. Save your sales receipt and original packaging in case it is

necessary to return your telephone for warranty service.

4

Important Safety Information

This symbol is to alert you to important operating or servicing

instructions that may appear in this user’s manual. Always follow basic

safety precautions when using this product to reduce the risk of injury,

re, or electric shock.

Important safety instructions

When using your telephone equipment, basic safety precautions should always

be followed to reduce the risk of re, electric shock and injury, including the

following:

1. This product should be installed by a qualied technician.

2. This product should only be connected to the host equipment and never

directly to the network such as Public Switch Telephone Network (PSTN) or

Plain Old Telephone Services (POTS).

3. Read and understand all instructions.

4. Follow all warnings and instructions marked on the product.

5. Unplug this product from the wall outlet before cleaning. Do not use liquid or

aerosol cleaners. Use a damp cloth for cleaning.

6. Do not use this product near water such as near a bath tub, wash bowl,

kitchen sink, laundry tub or swimming pool, or in a wet basement or shower.

7. Do not place this product on an unstable table, shelf, stand or other unstable

surfaces.

8. Slots and openings in the back or bottom of the telephone base and handset

are provided for ventilation. To protect them from overheating, these

openings must not be blocked by placing the product on a soft surface such

as a bed, sofa or rug. This product should never be placed near or over a

radiator or heat register. This product should not be placed in any area where

proper ventilation is not provided.

9. This product should be operated only from the type of power source indicated

on the marking label. If you are not sure of the type of power supplied at the

premises, consult your dealer or local power company.

10. Do not allow anything to rest on the power cord. Do not install this product

where the cord may be walked on.

11. Never push objects of any kind into this product through the slots in the

telephone base or handset because they may touch dangerous voltage

points or create a short circuit. Never spill liquid of any kind on the product.

5

12. To reduce the risk of electric shock, do not disassemble this product, but

take it to an authorized service facility. Opening or removing parts of the

telephone base or handset other than specied access doors may expose

you to dangerous voltages or other risks. Incorrect reassembling can cause

electric shock when the product is subsequently used.

13. Do not overload wall outlets and extension cords.

14. Unplug this product from the wall outlet and refer servicing to an authorized

service facility under the following conditions:

A. When the power supply cord or plug is damaged or frayed.

B. If liquid has been spilled onto the product.

C. If the product has been exposed to rain or water.

D. If the product does not operate normally by following the operating

instructions. Adjust only those controls that are covered by the

operation instructions. Improper adjustment of other controls may

result in damage and often requires extensive work by an authorized

technician to restore the product to normal operation.

E. If the product has been dropped and the telephone base and/or

handset has been damaged.

F. If the product exhibits a distinct change in performance.

15. Avoid using a telephone (other than cordless) during an electrical storm.

There is a remote risk of electric shock from lightning.

16. Do not use the telephone to report a gas leak in the vicinity of the leak. Under

certain circumstances, a spark may be created when the adapter is plugged

into the power outlet, or when the handset is replaced in its cradle. This is a

common event associated with the closing of any electrical circuit. The user

should not plug the phone into a power outlet, and should not put a charged

handset into the cradle, if the phone is located in an environment containing

concentrations of ammable or ame-supporting gases, unless there is

adequate ventilation. A spark in such an environment could create a re or

explosion. Such environments might include: medical use of oxygen without

adequate ventilation; industrial gases (cleaning solvents; gasoline vapors;

etc.); a leak of natural gas; etc.

17. Only put the handset of your telephone next to your ear when it is in normal

talk mode.

18. The power adapters are intended to be correctly oriented in a vertical or oor

mount position. The prongs are not designed to hold the plug in place if it is

plugged into a ceiling, under-the-table or cabinet outlet.

19. Use only the power cord and batteries indicated in this manual. Do not

dispose of batteries in a re. They may explode. Check with local codes for

possible special disposal instructions.

6

20. For pluggable equipment, the socket-outlet shall be installed near the

equipment and shall be easily accessible.

21. In wall mounting position, make sure to mount the telephone base on the wall

by aligning the eyelets with the mounting studs of the wall plate. Then slide

the telephone base down on both mounting studs until it locks into place.

Refer to the full instructions in Deskset Installation in this user guide.

22. CAUTION: Keep small metallic objects such as pins and staples away from

the handset receiver.

SAVE THESE INSTRUCTIONS

7

Important Safety Information

Important safety instructions.............. 4

Introduction

Deskset features................................ 9

Quick Reference Guide

Front panel features ........................ 10

Dial pad and audio keys ................. 11

Rear panel connection ports............ 11

Programmable Feature keys ........... 12

Deskset Installation

Overview.......................................... 13

Network requirements ..................... 13

Location ........................................... 14

Connecting the phone ..................... 15

Installing the phone ......................... 16

To mount the phone on the wall....... 17

Wall mount to tabletop installation ... 19

Using the Phone

Home screen ................................... 20

Home screen shortcuts.................... 20

Header icons ................................... 22

Feature key indicators ..................... 23

Using the menu ............................... 24

Main menu items ............................. 24

Making calls ..................................... 25

Answering calls................................ 27

Putting a call on hold ....................... 29

Managing calls with FLASH............. 30

Forwarding calls .............................. 31

Transferring calls ............................. 33

Making a conference call ................. 36

Setting up a Network Conference.... 37

Retrieving messages ....................... 38

Using a shared line .......................... 39

Call monitoring with shared lines ..... 39

Putting a shared-line call on hold .... 40

“Barging in” ...................................... 40

Busy lamp eld ................................ 42

Paging ............................................. 43

Phone Features

Using the local directory .................. 45

Using the Blacklist ........................... 49

Call history ....................................... 50

Call recording .................................. 52

Listening to call recordings .............. 53

Transferring call recordings to a

computer.......................................... 54

Viewing the Phone Status ............... 55

Finding the software version............ 55

Finding the IP Address .................... 56

Setting Do Not Disturb ..................... 56

Setting Call Forwarding ................... 57

Setting Anonymity ............................ 58

ErisTerminal SIP Deskset

VSP861

User Guide

Table of Contents

8

Setting Call Alerts ........................... 60

Setting Auto Answer ........................ 60

Cordless Headset

Registering an optional cordless

headset ............................................ 62

Deregistering a cordless headset .... 63

Deregistering the cordless headset

without the deskset .......................... 63

Cordless accessory registration and

deregistration time-out ..................... 63

Cordless Handset

Registering an optional cordless

handset ............................................ 64

Deregistering the cordless handset . 65

Conguring the Phone

Using the App Settings menu .......... 66

Conguring the default screen......... 67

Conguring the Home screen shortcuts

68

Using the User Settings menu ......... 69

Display ............................................. 70

Audio ............................................... 71

Setting the date and time................. 72

Setting the language........................ 73

Setting the Key Unlock PIN ............. 74

Hiding In-Call Digits ......................... 75

Conguring the Feature keys .......... 76

Changing the password ................... 77

Restarting the phone ....................... 77

WebUI

Using the WebUI ............................. 78

Status .............................................. 80

Call Settings .................................... 81

User Preferences............................. 84

Programmable Keys ........................ 86

Speed Dial ....................................... 89

Directory .......................................... 90

Blacklist ........................................... 93

Remote XML .................................... 93

Call History ...................................... 94

Servicing .......................................... 95

PIN Masking .................................... 96

Phone Lock...................................... 96

Troubleshooting

General issues................................. 97

Specications

Electrical and environmental

specications ................................... 98

Special Characters

Entering special characters ............. 99

Maintenance

Taking care of your telephone ....... 100

GPL License Information

GPL code requests ........................ 101

9

Introduction

This user’s manual contains detailed instructions for using your VSP861 deskset.

Please read this user’s manual before using your telephone.

Deskset features

The VTech VSP861 deskset is full-featured SIP endpoint business phone designed

to work with popular hosted IP PBX services and on-premise SIP PBXs. Once

you have ordered and congured your PBX service, the deskset enables you to

make and receive calls as you would with any other business phone. The deskset

provides calling features such as hold, transfer, conferencing, speakerphone,

quick-dial numbers and one-touch voicemail access.

There are two ports, known as the Ethernet port and PC port, at the back of

the deskset. The Ethernet port allows the VSP861 deskset to connect to the

hosted IP PBX via a router. The PC port is for another device such as a personal

computer to connect to the local area network through the deskset.

The VSP861 deskset supports paging and call transfers between system extensions

and can connect you and two other parties on the same conference call.

The slot on the back of the phone accepts a micro SD card. The SD card allows call

recording, if your administrator has enabled this feature.

The telephone also has 30 virtual feature keys. You or your system administrator

can program these keys for functions such as quick dial, redial, Do Not Disturb,

call forwarding, message retrieval, and call parking.

The keys can also be programmed as Busy Lamp Field keys, to monitor other

desksets in the system. You can press the key for a monitored extension to

answer a call at your own deskset. The feature keys have two-color indicators to

indicate call activity. For more information about the feature keys, see page 23.

The VSP861 IP Phone features include:

• Large backlit color touchscreen

• Speakerphone, Hold, Redial and Mute keys

• Up to 8 lines

• Up to 10 active calls

• 3-way conferencing

• Message Waiting alert LED

• Dual GigE Ethernet ports

• Power over Ethernet enabled

• DECT cordless headset and headset support

• 1000-entry local directory

• MicroSD card slot and call recording

10

Quick Reference Guide

Front panel features

SCREEN

Displays call information, menu

icons, and deskset menus.

CANCEL

Press to cancel an operation or exit a menu.

NAVIGATION PAD

Press q or p to scroll through

menus, highlight items or change

settings.

While entering text, press t or u

to move the cursor left or right.

Press OK to select a menu item

or save a setting.

MESSAGE WAITING indicator

Flashes when you have a new

voice message.

VSP861

VSP786A

Corded headset input (on side)

SPEAKER

Press to turn the speakerphone on or off.

REDIAL

Press to view list of previously dialed numbers.

HOLD

Press to put a call on hold.

MUTE

During a call,

press to mute

the microphone.

HEADSET

When a headset is connected

to the phone, press to make,

answer or hang up a call.

MIC (underneath)

– VOLUME +

Press to:

• adjust the listening volume

during a call.

• adjust the playback volume

during message playback.

• adjust the ringer volume

when the phone is idle.

SD card slot (on back)

11

PoE Class 3

Use only

Supplied

Adapter

5.1V

Quick Reference Guide

Rear panel connection ports

Ethernet/LAN port Power adapter jack

PC port Reserved for future use

Do not connect to other equipment.

12

Programmable Feature keys

The table below lists the default settings for the feature keys. The key

assignments on your phone may be different. For the complete list of

programmable key options and how to edit them, see “Programmable Keys” on

page 85.

To view the feature keys, you can press:

• on the screen header.

• on the idle screen. You may need to press to view additional idle

screen icons.

The rst page of 15 feature keys appears.

Key Number Setting

1 Line 1*

2 Line 1

3 Line 1

4 Directory

5 Call History

6 Redial

7 Messages

8 Do Not Disturb

9Call Forward All

10 None

11 None

12 None

13–30 None

* Your system administrator can assign more than one key to a line. For example, you might be

able to activate Line 1 with keys 1 and 2, and Line 2 with keys 3 and 4. Consult your administrator

regarding your phone’s conguration.

Quick Reference Guide

13

Deskset Installation

Overview

This section assumes that your network infrastructure is established and that

your IP PBX service has been ordered and congured for your location.

Install the phone close to a router or network switch. You can power the phone

using the supplied power adapter or Power over Ethernet (PoE—Class 3). If you

are not using PoE, install the phone near a power outlet not controlled by a wall

switch. The phone can be placed on a at surface or vertically mounted on the wall.

For customer service or product information, visit our website at

businessphones.vtech.com or call 1 (888) 370-2006.

Network requirements

A switched network topology is recommended for your LAN. The ofce LAN

infrastructure should use Cat.-5/Cat.-5e cable.

The LAN connections to the deskset(s) should all be wired. However, wireless

connections to other devices (such as laptops) in your ofce will not impede

performance.

All desksets must reside on a single subnet. A Dynamic Host Conguration

Protocol (DHCP) server is recommended and must be on the same subnet as

the desksets so that IP addresses can be auto-assigned. In most cases, your

network router will have a DHCP server. By default, the deskset has DHCP

enabled for automatic IP address assignment.

NOTE

Some DHCP servers have default settings that limit the number of network

IP addresses assigned to devices on the network. You should log in to your

server to conrm that the IP range is sufcient.

If no DHCP server is present, you can assign static IPs to desksets. See the

Administrator and Provisioning Guide for more information. If you do not have a

DHCP server or do not manually assign static IPs, you will not be able to access

the WebUI and/or enable automatic time updates from an NTP server.

A DNS server is recommended to resolve the path to the Internet and to a server

for rmware and conguration updates. If necessary, the system administrator

can also download upgrade les and use the WebUI to update the deskset

rmware and/or conguration settings manually.

14

Deskset Installation

Location

Avoid placing the deskset too close to:

• Communication devices such as television sets, DVD players, or other

cordless telephones

• Excessive heat sources

• Noise sources such as a window with trafc outside, motors, microwave

ovens, refrigerators, or uorescent lighting

• Excessive dust sources such as a workshop or garage

• Excessive moisture

• Extremely low temperature

• Mechanical vibration or shock such as on top of a washing machine or work

bench

15

Deskset Installation

Connecting the phone

IMPORTANT INFORMATION

1. Use only a compatible VTech power adapter.

To get a replacement power adapter, visit our website at

businessphones.vtech.com, or call 1 (888) 370-2006.

2. The power adapter is intended to be correctly oriented in a vertical or oor

mount position. The prongs are not designed to hold the plug in place if it is

plugged into a ceiling, under-the-table or cabinet outlet.

Router

Plug the other end of

the Ethernet cable into

the router connecting

to your console.

Plug one end of the

Ethernet cable into the

Ethernet port at the back

of the phone.

Plug the small end

of the phone power

adapter into the power

jack at the back of the

phone (if PoE cannot

be provided through

Ethernet cable).

Plug the large end of the

phone power adapter

into an electrical outlet

not controlled by a wall

switch (if PoE cannot

be provided through

Ethernet cable).

16

Make sure you plug in the Ethernet cable before powering up the phone.

1. If you plan to place the phone on a at surface, attach the stand. Line up the

tabs on the stand with the slots on the rear of the phone. Two sets of slots

allow you to attach the stand at different angles.

2. Plug the end of the coiled handset cord into the jack on the side of the

telephone.

3. Plug one end of the Ethernet cable into the Ethernet port on the rear of the

deskset (marked by ), and plug the other end of the cable into your

network router or switch.

If the deskset is not using power from a PoE-capable network router or switch:

a. Connect the supplied power adapter to the deskset power jack.

b. Plug the power adapter into an electrical outlet that is not controlled by a

wall switch.

If there is a networked computer and no extra Ethernet wall ports near the phone,

then the phone and PC can share the same network connection.

Deskset Installation

Installing the phone

VSP861

Handset cord jack

17

To share a network connection with a PC:

1. Plug a Cat.-5 Ethernet cable into the PC port on the phone (marked by ).

2. Plug the other end of the Cat.-5 Ethernet cable into your computer’s Ethernet port.

• If a PC is connected to your network through a phone, any phone resets and

power or network interruptions will disrupt the PC’s connection to the network.

To insert a microSD card (optional):

1. Release the microSD card cover and swivel it out of the way.

2. Insert a microSD card (oriented as shown on the phone), pressing it down

with a ngernail until it clicks into place.

To mount the phone on the wall

1. Prepare the wall-mount screws. The deskset will t onto wall-mount screws

with centers 3 ¼ inches (8.2 cm) or 4 inches (10.2 cm) apart. Most standard

wall plates have screw centers 3 ¼ inches (8.2 cm) apart.

2. If the deskset stand is attached, detach the stand.

3. Put the corded handset aside. Use a coin to rotate the handset tab 180

degrees. The protruding edge holds the corded handset when the phone is

mounted on the wall.

Protruding edge

Handset tab

4. Plug one end of the Ethernet cable into the Ethernet port on the rear of the

deskset (marked by ).

5. If the deskset is not using power from a PoE-capable network router or

switch, connect a power adapter to the deskset power jack.

Deskset Installation

Installing the phone (continued)

18

6. Align the upper wall mounting hole on the back of the phone with the upper

tab of the standard wall plate. Make sure the lower wall mounting hole on the

mounting bracket also aligns with the lower tab of the standard wall plate.

Push the phone down until it clicks securely in place.

7. Bundle the Ethernet cable and power adapter cord neatly with twist ties.

8. Plug the Ethernet cable into the router your console is connected to and the

power adapter into an electrical outlet not controlled by a wall switch if you

are not using PoE.

Deskset Installation

To mount the phone on the wall (continued)

19

To change the phone from the wall mount position to tabletop position, follow the

steps below.

1. If the Ethernet cable and power adapter cord are bundled, untie them rst.

2. Push the phone up to remove it from wall. Unplug the Ethernet cable from

the router and the power adapter from the power outlet.

3. See “Installing the phone” on page 16.

Deskset Installation

Wall mount to tabletop installation

20

Using the Phone

Home screen

The Home screen appears after the phone is connected and congured for your

SIP PBX service. The Home screen indicates that you have no active or held

calls. If you have an active call or are viewing a menu, you can view the Home

screen at any time by pressing .

Pressing the shortcuts on the Home screen performs the actions described

below. To view additional shortcuts, press .

NOTE

• The Home screen is one of three possible default screens. The default

screen appears when your phone is idle. You can select your prefered

default screen on the App Settings menu. See “Conguring the Phone”

on page 66.

• Your system administrator can add a custom background to the Home

screen. The appearance of your Home screen and the available

shortcuts may differ from that shown.

Home screen shortcuts

This table describes the Home screen shortcuts. Pressing these shortcuts opens

various applications on the phone.

To launch an application, you can either:

• Press the shortcut.

• Highlight the shortcut using the Navigation key and then press OK.

These are the icons that appear with default settings. Your system administrator

may include other icons on your deskset idle screen.

Icon Press to...

Select a line to use for a new call.

Make a call using the default line (when the key is labeled New Call) or using

the line specied by the label (Line 1, for example). The Live Dialing screen

opens.

Home screen

Home screen header

La pagina sta caricando ...

VTech ErisTerminal VSP861 Manuale utente

Questo manuale è adatto anche per

VTech ErisTerminal VSP861 Manuale utente

in altre lingue

Altri documenti