Siemens Gigaset S680 Manuale utente

s

Gigaset

Gigaset S680

-

S685

Issued by

Gigaset Communications GmbH

Schlavenhorst 66, D-46395 Bocholt

Gigaset Communications GmbH is a trademark licensee of Siemens AG

Subject to availability. Rights of modifications reserved.

www.gigaset.com

1

Handset at a glance

Gigaset S680/S685 / IM En / A31008-M1901-R101-1-3T19 / overview.fm / 26.9.08

Version 4, 16.09.2005

Handset at a glance

1 Display (screen) in idle status

2 Charge status of the batteries

= e V U (flat to full)

= flashes: batteries almost flat

e V U flashes: batteries charging

3 Display keys (page 12)

4 Message key

Access to calls and message lists;

Flashes: new message or new call

5 End call key, On/Off key

End call, cancel function, go back one menu

level (press briefly), back to idle status

(press and hold), activate/deactivate hand-

set (press and hold in idle status)

6 Hash key

Keypad lock on/off (press and hold in

idle status),

Toggle between upper/lower case and digits

(press and hold)

7 Call-by-call list key

Open call-by-call list

8 Microphone

9 Recall key

- Confer (flash)

- Insert a dialling pause (press and hold)

10 Star key

Ringer tones on/off (press and hold);

With an open connection: switch between

dial pulsing/touch tone dialling

(press briefly)

Open special characters table

11 Key 1

Dial answer machine (S685 only)/network

mailbox (press and hold)

12 Connection socket for headset

13 Talk key

Answer a call, open last number redial list

(press briefly), start dialling (press and hold)

When writing an SMS: send SMS

14 Handsfree key

Switch between earpiece and handsfree

mode;

Lights up: handsfree activated;

Flashes: incoming call

15 Control key (page 11)

16 Bluetooth activated (page 55)

17 Eco mode activated (page 13)

18 Signal strength

Ð i Ñ Ò (high to low)

| flashes: no reception

19 Answer machine icon (S685 only)

Answer machine switched on;

Flashes: answer machine is recording a mes-

sage or is being operated by another inter-

nal party

2

3

5

4

6

7

15

14

11

9

10

8

1

13

Ð

½

òÃ V

INT 1

15.11.07 09:45

?SMS

12

18

19

17

16

2

The base station at a glance

Gigaset S680/S685 / IM En / A31008-M1901-R101-1-3T19 / overview.fm / 26.9.08

Version 4, 16.09.2005

The base station at a glance

You can use the keys on the base station to

register handsets to the base station,

search for handsets ("Paging", see

page 44) and operate the integrated

answer machine (Gigaset S685 only).

Base station Gigaset S685

1 Registration/paging key

Press briefly: search for handsets "Paging",

see page 44.

Press and hold: register handsets and DECT

devices, see page 43.

2 On/Off key: activate/deactivate answer ma-

chine.

LED lights up: answer machine is activated.

LED flashes: at least one new message is

present.

During message playback:

3 Play/stop key:

Play back new messages from the answer

machine or cancel the playback (press

briefly).

Play back new and old messages (press and

hold).

4 Skip to next message (press once) or next

message but one (press twice).

5 Skip back to beginning of message (press

once) or to previous message (press twice).

6 Delete current message.

7 Adjust volume during message playback:

ð = quieter; ñ = louder.

While an external call is being signalled:

adjust ringer tone volume.

Please note:

u If the answer machine is being oper-

ated from a handset or if it is recording

a message, it cannot be operated from

the base station.

u If the LED flashes although the answer

machine is switched off, it means that

there is still at least one new message

that has not been played back yet.

Base station Gigaset S680

Registration/paging key:

– Press briefly: search for handsets

"Paging", see page 44.

– Press and hold: register handsets and

DECT devices, see page 43.

LED

6

7

2

3

4

5

1

3

Contents

Gigaset S680/S685 / IM En / A31008-M1901-R101-1-3T19 / S685IVZ.fm / 26.9.08

Version 4, 16.09.2005

Contents

Handset at a glance . . . . . . . . . . . 1

The base station at a glance . . . . 2

Safety precautions . . . . . . . . . . . . 5

Gigaset S680/S685 –

More than just a telephone . . . . . 7

First steps . . . . . . . . . . . . . . . . . . . . 7

Pack contents . . . . . . . . . . . . . . . . . . . . 7

Installing the base station and

charging cradle . . . . . . . . . . . . . . . . . . . 7

Setting up the handset for use . . . . . . . 8

Operating the handset . . . . . . . . 11

Control key . . . . . . . . . . . . . . . . . . . . . 11

Display keys . . . . . . . . . . . . . . . . . . . . 12

Reverting to idle status . . . . . . . . . . . . 12

Menu guidance . . . . . . . . . . . . . . . . . 12

Correcting incorrect entries . . . . . . . . 13

ECO DECT . . . . . . . . . . . . . . . . . . . 13

Menu tree . . . . . . . . . . . . . . . . . . 14

Making calls . . . . . . . . . . . . . . . . . 16

Making an external call . . . . . . . . . . . 16

Ending a call . . . . . . . . . . . . . . . . . . . . 16

Accepting a call . . . . . . . . . . . . . . . . . 16

Calling Line Identification . . . . . . . . . 17

Handsfree talking . . . . . . . . . . . . . . . . 18

Muting . . . . . . . . . . . . . . . . . . . . . . . . 18

Making calls easily using

network services . . . . . . . . . . . . . 19

Using the directory and lists . . . 20

Directory/call-by-call list . . . . . . . . . . . 20

Last number redial list . . . . . . . . . . . . 24

Opening lists with the

message key . . . . . . . . . . . . . . . . . . . . 24

Making cost-effective calls . . . . 26

Linking call-by-call numbers

with one number . . . . . . . . . . . . . . . . 26

Automatic network provider

preselection (Preselection) . . . . . . . . . 26

SMS (text messages) . . . . . . . . . 28

Writing/sending an SMS . . . . . . . . . . . 28

Receiving an SMS . . . . . . . . . . . . . . . . 30

Notification by SMS . . . . . . . . . . . . . . . 32

SMS mailboxes . . . . . . . . . . . . . . . . . . 32

Setting SMS centres . . . . . . . . . . . . . . 33

SMS on a PABX . . . . . . . . . . . . . . . . . . 34

Activating/deactivating muting

for the first ringer tone . . . . . . . . . . . . 34

Activating/deactivating the

SMS function . . . . . . . . . . . . . . . . . . . . 34

SMS troubleshooting . . . . . . . . . . . . . 35

Operating the answer

machine of the Gigaset S685

base station . . . . . . . . . . . . . . . . 36

Operation via the handset . . . . . . . . . 36

Activating/deactivating call

screening . . . . . . . . . . . . . . . . . . . . . . . 39

Setting up the answer machine . . . . . 40

Resetting fast access for the

answer machine using key 1 . . . . . . . 40

Operating when on the move

(remote control) . . . . . . . . . . . . . . . . . 41

Using the network mailbox . . . 42

Configuring fast access for the

network mailbox . . . . . . . . . . . . . . . . . 42

Viewing the network mailbox

report . . . . . . . . . . . . . . . . . . . . . . . . . 42

Using several handsets . . . . . . . 43

Registering handsets . . . . . . . . . . . . . . 43

Deregistering handsets . . . . . . . . . . . . 44

Locating a handset ("paging") . . . . . . 44

Changing the base station . . . . . . . . . 44

Making internal calls . . . . . . . . . . . . . . 44

Listening in to an external call . . . . . . 45

Changing the name of a handset . . . . 46

Changing a handset's internal

number . . . . . . . . . . . . . . . . . . . . . . . . 46

Using a handset as a

room monitor . . . . . . . . . . . . . . . . . . . 46

Handset settings . . . . . . . . . . . . 47

Shortcuts for functions

and numbers . . . . . . . . . . . . . . . . . . . . 47

4

Contents

Gigaset S680/S685 / IM En / A31008-M1901-R101-1-3T19 / S685IVZ.fm / 26.9.08

Version 4, 16.09.2005

Changing the display language . . . . . 48

Setting the display . . . . . . . . . . . . . . . 48

Setting the screensaver . . . . . . . . . . . 49

Setting the display backlight . . . . . . . 49

Activating/deactivating

auto answer . . . . . . . . . . . . . . . . . . . . 49

Changing the handsfree/

earpiece volume . . . . . . . . . . . . . . . . . 50

Changing ringer tones . . . . . . . . . . . . 50

My stuff . . . . . . . . . . . . . . . . . . . . . . . 51

Activating/deactivating

advisory tones . . . . . . . . . . . . . . . . . . 52

Setting the alarm clock . . . . . . . . . . . . 53

Setting an appointment

(calendar) . . . . . . . . . . . . . . . . . . . . . . 53

Displaying missed appointments

and anniversaries . . . . . . . . . . . . . . . . 54

Using Bluetooth devices . . . . . . . . . . . 55

Setting your own area code . . . . . . . . 57

Restoring the handset to the

factory settings . . . . . . . . . . . . . . . . . . 57

Base station settings . . . . . . . . . . 57

Protecting against unauthorised

access . . . . . . . . . . . . . . . . . . . . . . . . . 57

Changing ringer tones

(Gigaset S685 only) . . . . . . . . . . . . . . 58

Activating/deactivating

music on hold . . . . . . . . . . . . . . . . . . . 58

Repeater support . . . . . . . . . . . . . . . . 58

Restoring the base station to

the factory settings . . . . . . . . . . . . . . 58

Connecting the base station

to PABX . . . . . . . . . . . . . . . . . . . . . 59

Dialling modes and recall . . . . . . . . . . 59

Saving an access code

(outside line code) . . . . . . . . . . . . . . . 59

Setting pauses . . . . . . . . . . . . . . . . . . 60

Switching temporarily to touch

tone dialling (DTMF) . . . . . . . . . . . . . . 60

Appendix . . . . . . . . . . . . . . . . . . 61

Care . . . . . . . . . . . . . . . . . . . . . . . . . . . 61

Contact with liquid . . . . . . . . . . . . . . . 61

Questions and answers . . . . . . . . . . . . 61

Service (Customer Care) . . . . . . . . . . . 63

Authorisation . . . . . . . . . . . . . . . . . . . 64

Specifications . . . . . . . . . . . . . . . . . . . 64

Notes on the user guide . . . . . . 65

Example of a menu input . . . . . . . . . . 65

Example of multiple line input . . . . . . 66

Writing and editing text . . . . . . . . . . . 66

Additional functions via the

PC interface . . . . . . . . . . . . . . . . 67

Accessories . . . . . . . . . . . . . . . . . 68

Wall-mounting the

base station . . . . . . . . . . . . . . . . 71

Index . . . . . . . . . . . . . . . . . . . . . . 72

5

Safety precautions

Gigaset S680/S685 / IM En / A31008-M1901-R101-1-3T19 / security.fm / 26.9.08

Version 4, 16.09.2005

Safety precautions

Warning:

Read the safety precautions and the user guide before use.

Explain their contents and the potential hazards associated with using the telephone to your children.

Only use the mains adapter supplied, as indicated on the underside of the base

station or charging cradle.

Fit only the recommended, rechargeable batteries (page 64), i.e. never use a

conventional (non-rechargeable) battery or other battery types as this could

result in significant health risks and personal injury.

Batteries should not be disposed of in general household waste. Observe the

local waste disposal regulations, which you can find out about by contacting

your local authority or the dealer you purchased the product from.

The operation of medical appliances may be affected. Be aware of the technical

conditions in your particular environment, e.g. doctor's surgery.

Do not hold the rear of the handset to your ear when it is ringing or when the

handsfree function is activated. Otherwise you risk serious and permanent dam-

age to your hearing.

The handset may cause an unpleasant humming noise in hearing aids.

Do not install the base station or charging cradle in bathrooms or shower rooms.

The base station and charging cradle are not splashproof (page 61).

Do not use your phone in environments with a potential explosion hazard

(e.g. paint shops).

If you give your Gigaset to someone else, make sure you also give them the user

guide.

Please remove faulty base stations from use or have them repaired by our

Service, as they could interfere with other wireless services.

$

ƒ

6

Safety precautions

Gigaset S680/S685 / IM En / A31008-M1901-R101-1-3T19 / security.fm / 26.9.08

Version 4, 16.09.2005

All electrical and electronic equipment must be disposed of separately from gen-

eral household waste using the sites designated by local authorities.

If a product displays this symbol of a crossed-out rubbish bin, the product is sub-

ject to European Directive 2002/96/EC.

The appropriate disposal and separate collection of used equipment serve to

prevent potential harm to the environment and to health. They are a precondi-

tion for the re-use and recycling of used electrical and electronic equipment.

For further information on disposing of your used equipment, please contact

your local authority, your refuse collection service or the dealer you purchased

the product from.

Please note:

Not all of the functions described in this manual are available in all countries.

7

Gigaset S680/S685 – More than just a telephone

Gigaset S680/S685 / IM En / A31008-M1901-R101-1-3T19 / starting.fm / 26.9.08

Version 4, 16.09.2005

Gigaset S680/S685 –

More than just a telephone

Your phone, which has a clearly laid out

colour display (65K colours) doesn't just

offer you the option of sending and receiv-

ing SMS messages via the fixed network

and of saving up to 250 phone numbers

and e-mail addresses (page 20) – it can do

much more besides:

u You can reduce the transmission power

by activating the eco mode (page 13).

u You can programme the keys of your

phone with important numbers or fre-

quently used functions. The number is

then dialled or the function started by

simply pressing a key (page 47).

u You can easily make calls using network

services (page 19).

u You can designate important people as

VIPs so you can tell important calls from

the ringer tone (page 21).

u You can assign pictures to your con-

tacts. You can then tell who is calling

you from the picture on your handset's

display.

Precondition: Calling Line Identification

(CLIP, page 17).

u You can save appointments (page 53)

and anniversaries (page 23) in your

phone and it will remind you of them in

advance.

u You can use Bluetooth™ for wireless

communication with other devices that

also use this technology (see page 55)

Bluetooth™ can be used for

– headsets (page 10)

– exchanging directory entries with

your mobile phone

(page 22)

– downloading photos (.bmp) to visu-

alise the caller (page 67)

– exchanging directories with Outlook

using Gigaset QuickSync (page 67).

Enjoy using your new telephone!

First steps

Pack contents

u one Gigaset S680/S685 base station

with mains adapter,

u one Gigaset S68H handset,

u one phone cord,

u two batteries,

u one battery cover,

u one belt clip,

u one user guide.

Installing the base station and

charging cradle

The base station and charging cradle are

designed for use in enclosed dry rooms

with a temperature range of +5 °C to

+45 °C.

Set up the base station at a central point in

the apartment or house.

You can find instructions on how to mount

the base station on the wall at the end of

this user guide.

Please note:

u Never expose the telephone to heat

sources, direct sunlight or other electri-

cal appliances.

u Protect your Gigaset from moisture,

dust, corrosive liquids and vapours.

8

First steps

Gigaset S680/S685 / IM En / A31008-M1901-R101-1-3T19 / starting.fm / 26.9.08

Version 4, 16.09.2005

Range and reception strength

Range:

u Outdoors: up to 300 m

u Indoors: up to 50 m

The range is reduced when eco mode is

activated (see page 13).

Reception strength:

The display shows the quality of the radio

range between the base station and hand-

set:

u Good to poor: ÐiÑÒ

u No reception: | flashes

Connecting the base station

¤ First connect the power supply unit

and then the phone jack as shown

below and place the cables in the cable

recesses.

1 Mains adapter 230 V

2 Phone jack with phone cord

Please note:

u The mains adapter must always be

connected, as the phone will not oper-

ate without mains connection.

u Only use the mains adapter and phone

cord supplied.

u If you buy a replacement phone cord,

make sure that the phone jack has the

correct type of wiring.

Setting up the handset for use

The display is protected

by a plastic film.

Please remove the

protective film!

Inserting the batteries

¤ Insert the batteries the right way round

(see figure).

2

1

Gigaset S680

2

1

Gigaset S685

Correct phone jack assignment

1unused

2unused

3a

4b

5unused

6unused

Warning:

Use only the rechargeable batteries recom-

mended by Gigaset Communications GmbH *

(page 64). Never use a conventional (non-

rechargeable) battery or other battery types as

this could result in significant health risks and

personal injury. For example, the batteries

could explode. The phone could also malfunc-

tion or be damaged as a result of using batter-

ies that are not of the recommended type.

* Gigaset Communications GmbH is a trademark

licensee of Siemens AG.

3

2

1

4

5

6

9

First steps

Gigaset S680/S685 / IM En / A31008-M1901-R101-1-3T19 / starting.fm / 26.9.08

Version 4, 16.09.2005

The polarity is indicated in/on the battery

compartment.

Closing the battery cover

¤ First, align the notches on the side of

the battery cover with the protrusions

on the inside of the housing.

¤ Then press the cover until it clicks into

place.

Attaching the belt clip

There are notches for attaching the belt

clip on the side of the handset at the same

height as the display.

¤ Press the belt clip onto the back of the

handset so that the protrusions on the

belt clip engage with the notches.

Opening the battery cover

¤ If fitted, remove the belt clip.

¤ Place your fingertip in the cavity in the

casing and lift the battery cover

upwards.

Placing the handset in the base station

and registering

¤ Place the handset in the base station

with its display facing upwards.

The handset registers automatically. Reg-

istration can take up to 5 minutes. During

this time Regstr.Procedure appears in the

display and the name of the base station

flashes, e.g. Base 1. The handset will be

assigned the lowest unassigned internal

number (1–6).

This will appear in the display when regis-

tration is complete, e.g. INT 1. This means

that the number 1 has been assigned. If

the internal numbers 1–6 are already

assigned to other devices, the number 6 is

overwritten.

To charge the batteries, leave the handset

in the base station.

Please note:

– Automatic registration is only possible

while no one is making calls using the base

station.

– Each key press interrupts the automatic

registration.

– If automatic registration does not work the

handset will have to be registered manually

(page 43).

– You can change the name of the handset

(page 46).

10

First steps

Gigaset S680/S685 / IM En / A31008-M1901-R101-1-3T19 / starting.fm / 26.9.08

Version 4, 16.09.2005

For questions and problems see page 61.

Headset socket

You can connect various headset types

(with 2.5 mm jack connector), including:

HAMA Plantronics M40, MX100 and

MX150.

You can access a list of headsets that

have been tested for compatibility on

the Internet at

www.plantronics.com/productfinder

.

Initial charging and discharging of

batteries

If the handset is activated, the flashing

battery icon e in the top right of the dis-

play indicates that the batteries are being

charged.

During handset operation, the battery

icon indicates the charge status of the bat-

teries (page 1). The correct charge level

can only be displayed if the batteries are

first fully charged and discharged.

¤ To do this, leave the handset in the

base station or charging cradle contin-

uously for seven hours. Your handset

need not be turned on for it to charge.

¤ Afterwards, remove the handset from

the base station and do not put it back

again until the batteries are fully dis-

charged.

Please note:

u Always repeat the charging and dis-

charging procedure if you remove the

batteries from the handset and reinsert

them.

u The batteries may warm up during

charging. This is not dangerous.

u After a while the charge capacity of the

batteries will decrease for technical rea-

sons.

Setting the date and time

The date and time must be set in order to,

for example, have the correct time for

incoming calls and be able to use the

alarm clock and calendar.

¤ If you have not yet set the date and

time, press the display key

§Time§ to open

the input field.

To change the time, open the input field

with:

v

¢ Ð ¢ Date/Time

¤ Change multiple line input:

Date:

Enter the day, month and year in 8-digit

format.

Time:

Enter hours and minutes as 4 digits,

e.g. Q M  5 for 07:15 a.m.

§Save§ Press the display key

Please note:

– If the handset has turned itself off because

the batteries are flat and if it is then placed

in the charging cradle, it will turn itself on

automatically.

– Only place the handset in the base station

or charging cradle that is intended for it.

Please note:

After the first battery charge and discharge

you may replace your handset in its base sta-

tion after every call.

11

Operating the handset

Gigaset S680/S685 / IM En / A31008-M1901-R101-1-3T19 / starting.fm / 26.9.08

Version 4, 16.09.2005

Display in idle status

Once the phone is registered and the time

set, the idle display is as shown here

(example). If the answer machine is acti-

vated, the answer machine icon × will

also be displayed in the header:

Your answer machine is set with a stand-

ard announcement.

Your phone is now ready for use.

If you have any queries about using your

phone, please read the tips on trouble-

shooting ("Questions and Answers",

page 61) or contact our customer service

department (Customer Care, page 63).

Operating the handset

Activating/deactivating the handset

a In idle status, press and hold

the end call key (confirma-

tion tone).

Activating/deactivating the keypad

lock

# Press and hold the hash key.

You will hear the confirmation tone. The

Ø icon appears in the display when the

keypad lock is activated.

The keypad lock is deactivated automati-

cally if someone calls you. It is re-activated

when the call is finished.

Control key

In the description below, the side of the

control key (up, down, right, left) that you

have to press in the different operating sit-

uations is marked in black, e.g. v for

"press right on the control key".

The control key has a number of different

functions:

When the handset is in idle status

s Open the directory.

v Open the main menu.

u Open the list of handsets.

t Call up the menu to set the call

volume (page 50), ringer

tones (page 50) and advisory

tones (page 52) for the hand-

set.

In the main menu and in input fields

You can use the control key to move the

cursor up t, down s, right v or left

u.

In lists and submenus

t / s Scroll up/down line by line.

v Open submenu or confirm

selection.

u Go back one menu level or

cancel.

During an external call

s Open the directory.

u Initiate internal consultation

call and mute

t Adjust the loudspeaker vol-

ume for earpiece and hands-

free mode.

ÐV

INT 1

15.11.07 07:15

?SMS

12

Operating the handset

Gigaset S680/S685 / IM En / A31008-M1901-R101-1-3T19 / starting.fm / 26.9.08

Version 4, 16.09.2005

Display keys

The function of the display keys changes

depending on the particular operating sit-

uation. Example:

1 Current display key functions are shown in

the bottom display line.

2 Display keys

The most important display icons are:

} Left display key, as long as it

has not been assigned a func-

tion (page 47).

¨ Open the main menu.

§Options§ Open a context-dependent

menu.

W Delete key: deletes one char-

acter at a time from right to

left.

Î Go back one menu level or

cancel operation.

Œ Fetch e-mail address from the

directory.

Ó Copy number into directory.

Ÿ Divert external call to answer

machine

(S685 only).

• Open the last number redial

list.

Reverting to idle status

You can revert to idle status from any-

where in the menu as follows:

¤ Press and hold the end call key a.

Or:

¤ Do not press any key: after 2 minutes

the display will automatically revert to

idle status.

Changes that you have not confirmed or

saved by pressing

§OK§, §Yes§, §Save§, §Send§ or

Save Entry

§OK§ will be lost.

An example of the display in idle status is

shown on page 1.

Menu guidance

Your telephone's functions are accessed

using a menu that has a number of levels.

Main menu (first menu level)

¤ Press v with the handset in idle status

to open the main menu.

The main menu functions are shown in

the display with colour icons and names.

To access a function, i.e. to open the cor-

responding submenu (next menu level):

¤ Navigate to the function using the con-

trol key q/r. The name of the func-

tion is displayed in the display header.

Press the display key

§OK§.

Submenus

The functions in the submenus are dis-

played as lists.

To access a function:

¤ Scroll to the function with the control

key q and press

§OK§.

Or:

¤ Enter the corresponding digit combina-

tion (page 14).

Briefly press the end call key a once to

return to the previous menu level/cancel

the operation.

2

1

? SMS

13

ECO DECT

Gigaset S680/S685 / IM En / A31008-M1901-R101-1-3T19 / starting.fm / 26.9.08

Version 4, 16.09.2005

Illustration in the user guide

The operating steps are shown in abbrevi-

ated form.

Example

The illustration:

v ¢ Ð ¢ Date/Time

means:

v Press the key to display the

main menu.

Ð Use the control key q to

scroll through submenu

Settings and press

§OK§.

Date/Time Scroll to the function with the

control key q and press

§OK§.

Other types of illustrations:

c / Q / * etc.

Press the matching key on the

handset.

~ Enter digits or letters.

You will find detailed examples of menu

entries and multiple line input in the

appendix to this user guide, page 65.

Correcting incorrect entries

You can correct incorrect characters in the

text by navigating to the incorrect entry

using the control key. You can then:

u press X to delete the character to the

left of the cursor

u insert characters to the left of the cur-

sor

u overwrite the character (flashing)

when entering the time and date etc.

ECO DECT

ECO DECT reduces power consumption by

using a power supply with low power con-

sumption and also reduces the transmis-

sion power of the base station.

If only one handset is registered and it is in

the base station, eco mode is always acti-

vated automatically. In this case, the

transmission power of the base station is

reduced to the minimum.

You can use your handset to reduce the

transmission power on the base station

manually even when the handset is not in

the base station.

By doing so, you will reduce the transmis-

sion power even if you have several hand-

sets registered.

Your handset also reduces the transmis-

sion power depending on the distance to

the base station.

Activating/deactivating eco mode:

v ¢ Ð ¢ Base ¢ Add. Features

¢ Eco Mode

§OK§ Press the display key

(=on).

If eco mode is activated manually, the

½

icon is displayed at the top of the screen.

If eco mode is activated automatically

(only one handset is registered and it is on

the base station) and eco mode has not

been activated via the menu, then the

icon is not displayed.

Please note:

– Activating eco mode reduces the range of

the base station.

– Eco mode and any repeater support (see

page 58) cancel each other out, i.e. both

functions cannot be used at the same time.

– If external handsets (GAP) and handsets

from earlier Gigasets versions are used,

your handset will not automatically reduce

the transmission power to the base station.

‰

14

Menu tree

Gigaset S680/S685 / IM En / A31008-M1901-R101-1-3T19 / menuetree.fm / 26.9.08

Version 4, 16.09.2005

Menu tree

Instead of scrolling to locate a menu function, you can select a function more quickly by

opening the menu and keying in a digit combination (or shortcut).

Example: vN22 for "Set ringer tone for external calls".

With the telephone in idle status, press v (open main menu):

1 SMS î

You have activated an SMS mailbox (general or private) without a PIN

1-1 New SMS (page 28)

1-2 Incoming 0 (page 31)

1-3 Outgoing 0 (page 29)

You have activated an SMS mailbox with a PIN or 2-3 mailboxes

1-1 Mailbox 1-1-1 New SMS (page 28)

1-1-2 Incoming 0 (page 31)

1-1-3 Outgoing 0 (page 29)

1-2

to

1-4

Mailbox 1

Mailbox 2

Mailbox 3

1-2-1

to

1-4-1

New SMS (page 28)

1-2-2

to

1-4-2

Incoming 0 (page 31)

1-2-3

to

1-4-3

Outgoing 0 (page 29)

1-6 Settings 1-6-1 Service Centres (page 33)

1-6-2 SMS Mailboxes (page 32)

1-6-3 Notify Number (page 32)

1-6-4 Notify Type (page 32)

1-6-5 Status Report (page 29)

1-6-6 Subscribe to SMS (page 28)

3 Calls List

Ì (page 25)

4 Add. Features

í

4-3 Room Monitor (page 46)

4-4 Data Transfer 4-4-2 Bluetooth (page 55)

4-4-3 Directory (page 22)

4-6 Missed Alarms (page 54)

5Alarm Clock

ì (page 53)

6 Calendar

ç (page 53)

15

Menu tree

Gigaset S680/S685 / IM En / A31008-M1901-R101-1-3T19 / menuetree.fm / 26.9.08

Version 4, 16.09.2005

7 Resource Dir. Ï

7-1 Screensavers (page 51)

7-2 Caller Pictures (page 51)

7-3 Sounds (page 51)

7-4 Capacity (page 52)

8 Settings

Ð

8-1 Date/Time (page 10)

8-2 Audio Settings 8-2-1 Handset Volume (page 50)

8-2-2 Ringer Settings (page 50)

8-2-3 Advisory Tones (page 52)

8-3 Display 8-3-1 Screen Saver (page 49)

8-3-2 Colour Scheme (page 48)

8-3-3 Contrast (page 48)

8-3-4 Backlight (page 49)

8-4 Handset 8-4-1 Language (page 48)

8-4-2 Auto Answer (page 49)

8-4-3 Register H/Set (page 43)

8-4-4 Select Base (page 44)

8-4-5 Area Codes (page 57)

8-4-6 Reset Handset (page 57)

8-5 Base 8-5-1 Ringer Settings (page 58)

8-5-2 Music on hold (page 58)

8-5-3 System PIN (page 57)

8-5-4 Base Reset (page 58)

8-5-5 Add. Features (page 13, page 45, page 59)

8-5-6 Preselection (page 26)

8-5-7 Calls List Type (page 25)

8-6 Voice Mail 8-6-1 Set Key 1 (page 42)

only S685 base station:

8-6-2 Ans Machine (page 36)

8-6-3 Call Screening (page 39)

8-6-4 Announcements (page 36)

8-6-5 Message Length (page 40)

8-6-6 Record Quality (page 40)

8-6-7 Ring Delay (page 40)

16

Making calls

Gigaset S680/S685 / IM En / A31008-M1901-R101-1-3T19 / telefony.fm / 26.9.08

Version 4, 16.09.2005

Making calls

Making an external call

External calls are calls using the public tel-

ephone network.

~c Enter the number and press

the talk key.

Or:

c~ Press and hold the talk key

c and then enter the

number.

You can cancel the dialling operation with

the end call key a.

You are shown the duration of the call

while the call is in progress.

Continuing a call on a Bluetooth headset

Precondition: Bluetooth is activated; a

connection has been established between

the Bluetooth headset and the handset

(see page 55).

Press the talk key on the Bluetooth head-

set; it may take up to 5 seconds to estab-

lish a connection to the handset.

For further details on your headset, see

the user guide issued with it.

Ending a call

a Press the end call key.

Accepting a call

The handset indicates an incoming call in

three ways: by ringing, by a display on the

screen and by the flashing handsfree key

d.

You can accept the call by:

¤ Pressing the talk key c.

¤ Pressing the handsfree key d.

¤ Gigaset S680: Press the display key

§Accept§.

¤ Gigaset S685: Press the display key

Ÿ to divert the call to the answer

machine (page 39).

If the handset is in the charging cradle and

the Auto Answer function is activated

(page 49), the handset will take a call

automatically when you lift it out of the

cradle.

If the ringer tone is intrusive, press the dis-

play key

§Silence§. You can take the call as

long as it is displayed on the screen.

Accepting a call on a Bluetooth headset

Precondition: Bluetooth is activated; a

connection has been established between

the Bluetooth headset and the handset

(see page 55).

Only press the talk key on the headset

when the headset itself rings (this may

take up to 5 seconds).

For further details on your headset, see

the user guide issued with it.

Please note:

Dialling using the directory, the call-by-call list

(page 1, page 20) or the calls and last number

redial list (page 25/page 24) saves you from

having to re-enter numbers and network pro-

vider prefixes ("call-by-call numbers").

17

Making calls

Gigaset S680/S685 / IM En / A31008-M1901-R101-1-3T19 / telefony.fm / 26.9.08

Version 4, 16.09.2005

Calling Line Identification

When you receive a call, the caller's

number and/or name is displayed on the

screen if the following conditions are met:

u Your network provider supports CLIP,

CLI and CNIP.

– CLI (Calling Line Identification): the

caller's number is transmitted.

– CLIP (Calling Line Identification Pres-

entation): the caller's number is dis-

played.

– CNIP (Calling Name Identification

Presentation): the caller's name is

displayed.

u You have arranged CLIP or CNIP with

your network provider.

u The caller has arranged CLI with the

network provider.

Call display with CLIP/CLI

If the number of the caller is saved in your

directory, you will see their name, and if

you have assigned a CLIP picture to that

caller, this will also be displayed.

or

1 Ringer tone icon

2 Number or name of caller

The following is displayed in place of the

number:

u External, if no number is transmitted.

u Withheld, if the caller has withheld Call-

ing Line Identification.

u Unavailable, if the caller has not

arranged Calling Line Identification.

Display with CNIP

If you have CNIP, then the name (town)

that is registered with your network pro-

vider for the caller's number will also be

displayed. If the number of the caller is

saved in your directory, the CNIP display is

replaced by the corresponding directory

entry.

1 Caller's number

2 Name and town

The display shows:

u External, if no number is transmitted.

u Withheld, if the caller has withheld

Calling Line Identification.

u Unavailable, if the caller has not

arranged Calling Line Identification.

1

2

Å

1234567890

Accept Silence

Gigaset S680

1

2

Å

1234567890

Silence

Ÿ

Gigaset S685

1234567890

Anna Fielding,

London

2

1

18

Making calls

Gigaset S680/S685 / IM En / A31008-M1901-R101-1-3T19 / telefony.fm / 26.9.08

Version 4, 16.09.2005

Handsfree talking

In handsfree mode, instead of holding the

handset to your ear you can put it down,

for example on the table in front of you.

This allows others to participate in the call.

Activating/deactivating handsfree

mode

Activating while dialling

~d Enter the number and press

the handsfree key.

¤ You should inform your caller before

you use the handsfree function so that

they know someone else is listening.

Switching between earpiece and

handsfree mode

d Press the handsfree key.

During a call and when listening to the

answer machine (Gigaset S685 only), acti-

vate or deactivate handsfree.

If you wish to place the handset in the

charging cradle during a call:

¤ Press and hold the handsfree key d

while placing the handset in the base

station. If the handsfree key d does

not light up, press the key again.

For how to adjust the loudspeaker vol-

ume, see page 50.

Muting

You can deactivate the microphone in

your handset during an external call.

The other party hears hold music.

u Press the control key on the

left to mute the handset.

” Press the display key to reacti-

vate the microphone.

You can turn the hold music on and off

(page 58).

19

Making calls easily using network services

Gigaset S680/S685 / IM En / A31008-M1901-R101-1-3T19 / TNet_Features_SAG.fm / 26.9.08

Version 4, 16.09.2005

Making calls easily using

network services

Network services are functions that your

network provider makes available to you.

You have to request these services from

your network provider.

¤ If you require assistance, please

contact your network provider.

La pagina sta caricando ...

Siemens Gigaset S680 Manuale utente

Questo manuale è adatto anche per

Siemens Gigaset S680 Manuale utente

in altre lingue

Documenti correlati

Altri documenti