Juniper SRX100 Manuale utente

SRX100 Services Gateway

Hardware Guide

Juniper Networks, Inc.

1194 North Mathilda Avenue

Sunnyvale, California 94089

USA

408-745-2000

www.juniper.net

Published: 2009-08-19

domain.

This product includes FreeBSD software developed by the University of California, Berkeley, and its contributors. All of the documentation and software

Cornell University and its collaborators. Gated is based on Kirton’s EGP, UC Berkeley’s routing daemon (routed), and DCN’s HELLO routing protocol.

Juniper Networks, the Juniper Networks logo, JUNOS, NetScreen, ScreenOS, and Steel-Belted Radius are registered trademarks of Juniper Networks, Inc. in

the United States and other countries. JUNOSe is a trademark of Juniper Networks, Inc. All other trademarks, service marks, registered trademarks, or

registered service marks are the property of their respective owners.

Juniper Networks assumes no responsibility for any inaccuracies in this document. Juniper Networks reserves the right to change, modify, transfer, or

otherwise revise this publication without notice.

Products made or sold by Juniper Networks or components thereof might be covered by one or more of the following patents that are owned by or licensed

to Juniper Networks: U.S. Patent Nos. 5,473,599, 5,905,725, 5,909,440, 6,192,051, 6,333,650, 6,359,479, 6,406,312, 6,429,706, 6,459,579, 6,493,347,

6,538,518, 6,538,899, 6,552,918, 6,567,902, 6,578,186, and 6,590,785.

SRX100 Services Gateway Hardware Guide

Revision History

August 2009—Revision 01

The information in this document is current as of the date listed in the revision history.

SOFTWARE LICENSE

The terms and conditions for using this software are described in the software license contained in the acknowledgment to your purchase order or, to the

extent applicable, to any reseller agreement or end-user purchase agreement executed between you and Juniper Networks. By using this software, you

indicate that you understand and agree to be bound by those terms and conditions.

Generally speaking, the software license restricts the manner in which you are permitted to use the software and may contain prohibitions against certain

uses. The software license may state conditions under which the license is automatically terminated. You should consult the license for further details.

For complete product documentation, please see the Juniper Networks Web site at www.juniper.net/techpubs.

ii ■

END USER LICENSE AGREEMENT

READ THIS END USER LICENSE AGREEMENT (“AGREEMENT”) BEFORE DOWNLOADING, INSTALLING, OR USING THE SOFTWARE. BY DOWNLOADING,

INSTALLING, OR USING THE SOFTWARE OR OTHERWISE EXPRESSING YOUR AGREEMENT TO THE TERMS CONTAINED HEREIN, YOU (AS CUSTOMER

OR IF YOU ARE NOT THE CUSTOMER, AS A REPRESENTATIVE/AGENT AUTHORIZED TO BIND THE CUSTOMER) CONSENT TO BE BOUND BY THIS

AGREEMENT. IF YOU DO NOT OR CANNOT AGREE TO THE TERMS CONTAINED HEREIN, THEN (A) DO NOT DOWNLOAD, INSTALL, OR USE THE SOFTWARE,

AND (B) YOU MAY CONTACT JUNIPER NETWORKS REGARDING LICENSE TERMS.

1. The Parties. The parties to this Agreement are (i) Juniper Networks, Inc. (if the Customer’s principal office is located in the Americas) or Juniper Networks

(Cayman) Limited (if the Customer’s principal office is located outside the Americas) (such applicable entity being referred to herein as “Juniper”), and (ii)

the person or organization that originally purchased from Juniper or an authorized Juniper reseller the applicable license(s) for use of the Software (“Customer”)

(collectively, the “Parties”).

2. The Software. In this Agreement, “Software” means the program modules and features of the Juniper or Juniper-supplied software, for which Customer

has paid the applicable license or support fees to Juniper or an authorized Juniper reseller, or which was embedded by Juniper in equipment which Customer

purchased from Juniper or an authorized Juniper reseller. “Software” also includes updates, upgrades and new releases of such software. “Embedded

Software” means Software which Juniper has embedded in or loaded onto the Juniper equipment and any updates, upgrades, additions or replacements

which are subsequently embedded in or loaded onto the equipment.

3. License Grant. Subject to payment of the applicable fees and the limitations and restrictions set forth herein, Juniper grants to Customer a non-exclusive

and non-transferable license, without right to sublicense, to use the Software, in executable form only, subject to the following use restrictions:

a. Customer shall use Embedded Software solely as embedded in, and for execution on, Juniper equipment originally purchased by Customer from Juniper

or an authorized Juniper reseller.

b. Customer shall use the Software on a single hardware chassis having a single processing unit, or as many chassis or processing units for which Customer

has paid the applicable license fees; provided, however, with respect to the Steel-Belted Radius or Odyssey Access Client software only, Customer shall use

such Software on a single computer containing a single physical random access memory space and containing any number of processors. Use of the

Steel-Belted Radius or IMS AAA software on multiple computers or virtual machines (e.g., Solaris zones) requires multiple licenses, regardless of whether

such computers or virtualizations are physically contained on a single chassis.

c. Product purchase documents, paper or electronic user documentation, and/or the particular licenses purchased by Customer may specify limits to

Customer’s use of the Software. Such limits may restrict use to a maximum number of seats, registered endpoints, concurrent users, sessions, calls,

connections, subscribers, clusters, nodes, realms, devices, links, ports or transactions, or require the purchase of separate licenses to use particular features,

functionalities, services, applications, operations, or capabilities, or provide throughput, performance, configuration, bandwidth, interface, processing,

temporal, or geographical limits. In addition, such limits may restrict the use of the Software to managing certain kinds of networks or require the Software

to be used only in conjunction with other specific Software. Customer’s use of the Software shall be subject to all such limitations and purchase of all applicable

licenses.

d. For any trial copy of the Software, Customer’s right to use the Software expires 30 days after download, installation or use of the Software. Customer

may operate the Software after the 30-day trial period only if Customer pays for a license to do so. Customer may not extend or create an additional trial

period by re-installing the Software after the 30-day trial period.

e. The Global Enterprise Edition of the Steel-Belted Radius software may be used by Customer only to manage access to Customer’s enterprise network.

Specifically, service provider customers are expressly prohibited from using the Global Enterprise Edition of the Steel-Belted Radius software to support any

commercial network access services.

The foregoing license is not transferable or assignable by Customer. No license is granted herein to any user who did not originally purchase the applicable

license(s) for the Software from Juniper or an authorized Juniper reseller.

4. Use Prohibitions. Notwithstanding the foregoing, the license provided herein does not permit the Customer to, and Customer agrees not to and shall

not: (a) modify, unbundle, reverse engineer, or create derivative works based on the Software; (b) make unauthorized copies of the Software (except as

necessary for backup purposes); (c) rent, sell, transfer, or grant any rights in and to any copy of the Software, in any form, to any third party; (d) remove

any proprietary notices, labels, or marks on or in any copy of the Software or any product in which the Software is embedded; (e) distribute any copy of

the Software to any third party, including as may be embedded in Juniper equipment sold in the secondhand market; (f) use any ‘locked’ or key-restricted

feature, function, service, application, operation, or capability without first purchasing the applicable license(s) and obtaining a valid key from Juniper, even

if such feature, function, service, application, operation, or capability is enabled without a key; (g) distribute any key for the Software provided by Juniper

to any third party; (h) use the Software in any manner that extends or is broader than the uses purchased by Customer from Juniper or an authorized Juniper

reseller; (i) use Embedded Software on non-Juniper equipment; (j) use Embedded Software (or make it available for use) on Juniper equipment that the

Customer did not originally purchase from Juniper or an authorized Juniper reseller; (k) disclose the results of testing or benchmarking of the Software to

any third party without the prior written consent of Juniper; or (l) use the Software in any manner other than as expressly provided herein.

5. Audit. Customer shall maintain accurate records as necessary to verify compliance with this Agreement. Upon request by Juniper, Customer shall furnish

such records to Juniper and certify its compliance with this Agreement.

■ iii

6. Confidentiality. The Parties agree that aspects of the Software and associated documentation are the confidential property of Juniper. As such, Customer

shall exercise all reasonable commercial efforts to maintain the Software and associated documentation in confidence, which at a minimum includes

restricting access to the Software to Customer employees and contractors having a need to use the Software for Customer’s internal business purposes.

7. Ownership. Juniper and Juniper’s licensors, respectively, retain ownership of all right, title, and interest (including copyright) in and to the Software,

associated documentation, and all copies of the Software. Nothing in this Agreement constitutes a transfer or conveyance of any right, title, or interest in

the Software or associated documentation, or a sale of the Software, associated documentation, or copies of the Software.

8. Warranty, Limitation of Liability, Disclaimer of Warranty. The warranty applicable to the Software shall be as set forth in the warranty statement that

accompanies the Software (the “Warranty Statement”). Nothing in this Agreement shall give rise to any obligation to support the Software. Support services

may be purchased separately. Any such support shall be governed by a separate, written support services agreement. TO THE MAXIMUM EXTENT PERMITTED

BY LAW, JUNIPER SHALL NOT BE LIABLE FOR ANY LOST PROFITS, LOSS OF DATA, OR COSTS OR PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES,

OR FOR ANY SPECIAL, INDIRECT, OR CONSEQUENTIAL DAMAGES ARISING OUT OF THIS AGREEMENT, THE SOFTWARE, OR ANY JUNIPER OR

JUNIPER-SUPPLIED SOFTWARE. IN NO EVENT SHALL JUNIPER BE LIABLE FOR DAMAGES ARISING FROM UNAUTHORIZED OR IMPROPER USE OF ANY

JUNIPER OR JUNIPER-SUPPLIED SOFTWARE. EXCEPT AS EXPRESSLY PROVIDED IN THE WARRANTY STATEMENT TO THE EXTENT PERMITTED BY LAW,

JUNIPER DISCLAIMS ANY AND ALL WARRANTIES IN AND TO THE SOFTWARE (WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE), INCLUDING

ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NONINFRINGEMENT. IN NO EVENT DOES JUNIPER

WARRANT THAT THE SOFTWARE, OR ANY EQUIPMENT OR NETWORK RUNNING THE SOFTWARE, WILL OPERATE WITHOUT ERROR OR INTERRUPTION,

OR WILL BE FREE OF VULNERABILITY TO INTRUSION OR ATTACK. In no event shall Juniper’s or its suppliers’ or licensors’ liability to Customer, whether

in contract, tort (including negligence), breach of warranty, or otherwise, exceed the price paid by Customer for the Software that gave rise to the claim, or

if the Software is embedded in another Juniper product, the price paid by Customer for such other product. Customer acknowledges and agrees that Juniper

has set its prices and entered into this Agreement in reliance upon the disclaimers of warranty and the limitations of liability set forth herein, that the same

reflect an allocation of risk between the Parties (including the risk that a contract remedy may fail of its essential purpose and cause consequential loss),

and that the same form an essential basis of the bargain between the Parties.

9. Termination. Any breach of this Agreement or failure by Customer to pay any applicable fees due shall result in automatic termination of the license

granted herein. Upon such termination, Customer shall destroy or return to Juniper all copies of the Software and related documentation in Customer’s

possession or control.

10. Taxes. All license fees payable under this agreement are exclusive of tax. Customer shall be responsible for paying Taxes arising from the purchase of

the license, or importation or use of the Software. If applicable, valid exemption documentation for each taxing jurisdiction shall be provided to Juniper prior

to invoicing, and Customer shall promptly notify Juniper if their exemption is revoked or modified. All payments made by Customer shall be net of any

applicable withholding tax. Customer will provide reasonable assistance to Juniper in connection with such withholding taxes by promptly: providing Juniper

with valid tax receipts and other required documentation showing Customer’s payment of any withholding taxes; completing appropriate applications that

would reduce the amount of withholding tax to be paid; and notifying and assisting Juniper in any audit or tax proceeding related to transactions hereunder.

Customer shall comply with all applicable tax laws and regulations, and Customer will promptly pay or reimburse Juniper for all costs and damages related

to any liability incurred by Juniper as a result of Customer’s non-compliance or delay with its responsibilities herein. Customer’s obligations under this

Section shall survive termination or expiration of this Agreement.

11. Export. Customer agrees to comply with all applicable export laws and restrictions and regulations of any United States and any applicable foreign

agency or authority, and not to export or re-export the Software or any direct product thereof in violation of any such restrictions, laws or regulations, or

without all necessary approvals. Customer shall be liable for any such violations. The version of the Software supplied to Customer may contain encryption

or other capabilities restricting Customer’s ability to export the Software without an export license.

12. Commercial Computer Software. The Software is “commercial computer software” and is provided with restricted rights. Use, duplication, or disclosure

by the United States government is subject to restrictions set forth in this Agreement and as provided in DFARS 227.7201 through 227.7202-4, FAR 12.212,

FAR 27.405(b)(2), FAR 52.227-19, or FAR 52.227-14(ALT III) as applicable.

13. Interface Information. To the extent required by applicable law, and at Customer's written request, Juniper shall provide Customer with the interface

information needed to achieve interoperability between the Software and another independently created program, on payment of applicable fee, if any.

Customer shall observe strict obligations of confidentiality with respect to such information and shall use such information in compliance with any applicable

terms and conditions upon which Juniper makes such information available.

14. Third Party Software. Any licensor of Juniper whose software is embedded in the Software and any supplier of Juniper whose products or technology

are embedded in (or services are accessed by) the Software shall be a third party beneficiary with respect to this Agreement, and such licensor or vendor

shall have the right to enforce this Agreement in its own name as if it were Juniper. In addition, certain third party software may be provided with the

Software and is subject to the accompanying license(s), if any, of its respective owner(s). To the extent portions of the Software are distributed under and

subject to open source licenses obligating Juniper to make the source code for such portions publicly available (such as the GNU General Public License

(“GPL”) or the GNU Library General Public License (“LGPL”)), Juniper will make such source code portions (including Juniper modifications, as appropriate)

available upon request for a period of up to three years from the date of distribution. Such request can be made in writing to Juniper Networks, Inc., 1194

N. Mathilda Ave., Sunnyvale, CA 94089, ATTN: General Counsel. You may obtain a copy of the GPL at http://www.gnu.org/licenses/gpl.html, and

a copy of the LGPL at http://www.gnu.org/licenses/lgpl.html.

15. Miscellaneous. This Agreement shall be governed by the laws of the State of California without reference to its conflicts of laws principles. The provisions

of the U.N. Convention for the International Sale of Goods shall not apply to this Agreement. For any disputes arising under this Agreement, the Parties

hereby consent to the personal and exclusive jurisdiction of, and venue in, the state and federal courts within Santa Clara County, California. This Agreement

constitutes the entire and sole agreement between Juniper and the Customer with respect to the Software, and supersedes all prior and contemporaneous

iv ■

agreements relating to the Software, whether oral or written (including any inconsistent terms contained in a purchase order), except that the terms of a

separate written agreement executed by an authorized Juniper representative and Customer shall govern to the extent such terms are inconsistent or conflict

with terms contained herein. No modification to this Agreement nor any waiver of any rights hereunder shall be effective unless expressly assented to in

writing by the party to be charged. If any portion of this Agreement is held invalid, the Parties agree that such invalidity shall not affect the validity of the

remainder of this Agreement. This Agreement and associated documentation has been written in the English language, and the Parties agree that the English

version will govern. (For Canada: Les parties aux présentés confirment leur volonté que cette convention de même que tous les documents y compris tout

avis qui s'y rattaché, soient redigés en langue anglaise. (Translation: The parties confirm that this Agreement and all related documentation is and will be

in the English language)).

■ v

vi ■

Table of Contents

About This Guide xiii

Objectives .....................................................................................................xiii

Audience ......................................................................................................xiii

Documentation Conventions ........................................................................xiii

SRX Series Documentation and Release Notes ..............................................xv

Obtaining Documentation .............................................................................xv

Documentation Feedback .............................................................................xvi

Requesting Technical Support .......................................................................xvi

Part 1 SRX100 Services Gateway Overview

Chapter 1 Introduction to the SRX100 Services Gateway 3

SRX100 Services Gateway Description ............................................................3

About the SRX100 Services Gateway ........................................................3

Accessing the SRX100 Services Gateway ..................................................3

SRX100 Services Gateway Features and Functions ..........................................4

Chapter 2 SRX100 Services Gateway Hardware Components and

Specifications 5

SRX100 Services Gateway Specifications .........................................................5

SRX100 Services Gateway Front Panel and Back Panel Views .........................6

SRX100 Services Gateway Front Panel .....................................................6

SRX100 Services Gateway Back Panel ......................................................7

SRX100 Services Gateway Built-In Interfaces ..................................................8

SRX100 Services Gateway LEDs ....................................................................10

SRX100 Services Gateway Front Panel LEDs ...........................................10

SRX100 Services Gateway Ethernet Port LEDs ........................................12

SRX100 Services Gateway Boot Devices ........................................................13

SRX100 Services Gateway Power Supply .......................................................13

Table of Contents ■ vii

Part 2 Setting Up the SRX100 Services Gateway

Chapter 3 Preparing the Site for SRX100 Services Gateway Installation 17

Site Preparation Checklist for the SRX100 Services Gateway .........................17

General Site Guidelines for Installing the SRX100 Services Gateway ..............19

SRX100 Services Gateway Cabinet Requirements .........................................20

SRX100 Services Gateway Rack Requirements ..............................................21

Clearance Requirements for Airflow and Hardware Maintenance of the

SRX100 Services Gateway ......................................................................22

SRX100 Services Gateway Electrical and Power Requirements .....................23

Chapter 4 Installation Overview for the SRX100 Services Gateway 25

Installation Overview for the SRX100 Services Gateway ................................26

Chapter 5 Required Tools and Parts for Installing and Maintaining the SRX100

Services Gateway 29

Required Tools and Parts for Installing and Maintaining the SRX100 Services

Gateway ..................................................................................................29

Chapter 6 Unpacking the SRX100 Services Gateway 31

Unpacking the SRX100 Services Gateway .....................................................31

Verifying Parts Received with the SRX100 Services Gateway ........................32

Chapter 7 Preparing the SRX100 Services Gateway for Installation 35

Preparing the SRX100 Services Gateway for Rack-Mount Installation ............35

Preparing the SRX100 Services Gateway for Desk-Mount Installation ............36

Preparing the SRX100 Services Gateway for Wall-Mount Installation ............37

Chapter 8 Installing the SRX100 Services Gateway 39

SRX100 Services Gateway Safety Requirements, Warnings, and

Guidelines ...............................................................................................39

Installing the SRX100 Services Gateway ........................................................39

Installing the SRX100 Services Gateway in a Rack ..................................40

Installing the SRX100 Services Gateway on a Desk .................................42

Installing the SRX100 Services Gateway on a Wall ..................................43

viii ■ Table of Contents

SRX100 Services Gateway Hardware Guide

Chapter 9 Connecting, Grounding, and Powering On the SRX100 Services

Gateway 45

Connecting the SRX100 Services Gateway to the Power Supply ....................45

Connecting and Organizing Interface Cables to the SRX100 Services

Gateway ..................................................................................................46

Grounding the SRX100 Services Gateway ......................................................47

Powering On and Powering Off the SRX100 Services Gateway .....................48

Powering On the SRX100 Services Gateway ...........................................48

Powering Off the SRX100 Services Gateway ...........................................49

Chapter 10 SRX100 Services Gateway Memory Upgrade 51

Upgrading the SRX100 Services Gateway Low Memory Version to a High

Memory Version .....................................................................................51

Chapter 11 SRX100 Services Gateway Autoinstallation 53

SRX100 Services Gateway Autoinstallation Overview ....................................53

Chapter 12 Establishing Basic Connectivity for the SRX100 Services

Gateway 55

SRX100 Services Gateway Basic Connectivity ...............................................55

SRX100 Services Gateway Basic Connectivity Overview .........................55

SRX100 Services Gateway Basic Connectivity Settings ............................56

Built-In Ethernet Ports for the SRX100 Services Gateway ........................58

Management Access for the SRX100 Services Gateway ..........................59

Connecting to an SRX100 Services Gateway .................................................60

Connecting an SRX100 Services Gateway to the J-Web Interface ............60

Connecting an SRX100 Services Gateway to the CLI Locally ...................62

Connecting an SRX100 Services Gateway to the CLI Remotely ...............64

Connecting the Modem at the SRX100 Services Gateway End ................64

Connecting the Modem to the Console Port on the SRX100 Services

Gateway ...........................................................................................65

Connecting to the CLI at the User End for the SRX100 Services

Gateway ...........................................................................................66

Configuring Basic Connectivity Settings on the SRX100 Services

Gateway ..................................................................................................67

Configuring Basic Settings for the SRX100 Services Gateway with J-Web

Quick Configuration .........................................................................67

Configuring Basic Settings for the SRX100 Services Gateway with a

Configuration Editor .........................................................................70

Displaying Basic Connectivity Configurations for the SRX100 Services

Gateway ...........................................................................................73

SRX100 Services Gateway Secure Web Access Overview ........................74

Table of Contents ■ ix

Table of Contents

Part 3 SRX100 Services Gateway Hardware Maintenance,

Replacement, and Monitoring Procedures

Chapter 13 Maintaining the SRX100 Services Gateway Hardware

Components 77

Maintaining the SRX100 Services Gateway Hardware Components ..............77

Chapter 14 Monitoring the SRX100 Services Gateway 79

Monitoring the Hardware Components on the SRX100 Services Gateway .....79

Monitoring the SRX100 Services Gateway Chassis Using the CLI ............79

Monitoring the SRX100 Services Gateway Components Using LEDs .......81

Monitoring the SRX100 Services Gateway Using Chassis Alarm

Conditions ........................................................................................83

Monitoring the SRX100 Services Gateway Power System .......................84

Resetting the Configuration File When the SRX100 Services Gateway Is

Inaccessible ............................................................................................85

Using the Reset Config Button on the SRX100 Services Gateway ............85

Changing the Reset Config Button Behavior on the SRX100 Services

Gateway ...........................................................................................86

Juniper Networks Technical Assistance Center ..............................................86

Juniper Networks Technical Assistance Center ........................................87

Part 4 Appendixes

Appendix A Safety and Regulatory Compliance Information 91

SRX100 Services Gateway Definition of Safety Warning Levels .....................91

SRX100 Services Gateway General Safety Guidelines and Warnings ..............93

SRX100 Services Gateway Fire Safety Requirements .....................................96

SRX100 Services Gateway Installation Safety Guidelines and Warnings ........97

SRX100 Services Gateway Laser and LED Safety Guidelines and

Warnings ..............................................................................................101

Laser and LED Safety Guidelines and Warnings ....................................102

General Laser Safety Guidelines ......................................................102

Class 1 Laser Product Warning .......................................................102

Class 1 LED Product Warning .........................................................102

Laser Beam Warning ......................................................................103

Radiation from Open Port Apertures Warning ................................104

SRX100 Services Gateway Maintenance and Operational Safety Guidelines

and Warnings .......................................................................................105

Safety Guidelines and Warnings ............................................................105

Battery Handling Warning ..............................................................105

Jewelry Removal Warning ..............................................................106

Lightning Activity Warning .............................................................107

x ■ Table of Contents

SRX100 Services Gateway Hardware Guide

Operating Temperature Warning ....................................................107

Product Disposal Warning ..............................................................109

SRX100 Services Gateway Electrical Safety Guidelines and Warnings .........109

Electrical Safety Guidelines and Warnings ............................................110

In Case of Electrical Accident .........................................................110

General Electrical Safety Guidelines and Warnings .........................110

SRX100 Services Gateway Agency Approvals ..............................................111

SRX100 Services Gateway Compliance Statements for EMC

Requirements .......................................................................................112

SRX100 Services Gateway Compliance Statements for Environmental

Requirements .......................................................................................113

Appendix B SRX100 Services Gateway Power Guidelines, Requirements, and

Specifications 115

SRX100 Services Gateway Site Electrical Wiring Guidelines .........................115

SRX100 Services Gateway Power Specifications and Requirements ............116

Appendix C SRX100 Services Gateway Interface Cable Specifications and

Connector Pinouts 119

Interface Cable and Wire Specifications for the SRX100 Services

Gateway ................................................................................................119

RJ-45 Connector Pinouts for the SRX100 Services Gateway Ethernet Port ....120

RJ-45 Connector Pinouts for the SRX100 Services Gateway Console Port ....120

Appendix D Contacting Customer Support and Returning the SRX100 Services

Gateway Hardware 123

Return Procedure for the SRX100 Services Gateway ...................................123

Locating the SRX100 Services Gateway Component Serial Number and

Agency Labels .......................................................................................124

Contacting Customer Support to Obtain a Return Materials

Authorization ........................................................................................125

Information You Might Need to Supply to Juniper Networks Technical

Assistance Center ...........................................................................125

Contacting Customer Support ...............................................................126

Packing the SRX100 Services Gateway and Components for

Shipment ........................................................................................126

Part 5 Index

Index ...........................................................................................................131

Table of Contents ■ xi

Table of Contents

xii ■ Table of Contents

SRX100 Services Gateway Hardware Guide

About This Guide

This topic includes the following sections:

■ Objectives on page xiii

■ Audience on page xiii

■ Documentation Conventions on page xiii

■ SRX Series Documentation and Release Notes on page xv

■ Obtaining Documentation on page xv

■ Documentation Feedback on page xvi

■ Requesting Technical Support on page xvi

Objectives

This guide describes hardware components and installation, basic configuration, and

basic troubleshooting procedures for the Juniper Networks SRX100 Services Gateway.

It explains how to prepare your site for the services gateway installation, unpack and

install the hardware, power on the services gateway, perform initial software

configuration, and perform routine maintenance. After completing the installation

and basic configuration procedures covered in this guide, see the JUNOS Software

configuration guides for information about further JUNOS Software configuration.

Audience

This guide is designed for network administrators who are installing and maintaining

a Juniper Networks SRX100 Services Gateway or preparing a site for device

installation. To use this guide, you need a broad understanding of networks in general

and the Internet in particular, networking principles, and network configuration. Any

detailed discussion of these concepts is beyond the scope of this guide.

Documentation Conventions

Table 1 on page xiv defines the notice icons used in this guide.

Objectives ■ xiii

Table 1: Notice Icons

DescriptionMeaningIcon

Indicates important features or instructions.Informational note

Indicates a situation that might result in loss of data or hardware damage.Caution

Alerts you to the risk of personal injury or death.Warning

Alerts you to the risk of personal injury from a laser.Laser warning

Table 2 on page xiv defines the text and syntax conventions used in this guide.

Table 2: Text and Syntax Conventions

ExamplesDescriptionConvention

To enter configuration mode, type the

configure command:

user@host> configure

Represents text that you type.

Bold text like this

user@host> show chassis alarms

No alarms currently active

Represents output that appears on the

terminal screen.

Fixed-width text like this

■

A policy term is a named structure

that defines match conditions and

actions.

■

JUNOS System Basics Configuration

Guide

■

RFC 1997, BGP Communities

Attribute

■

Introduces important new terms.

■

Identifies book names.

■

Identifies RFC and Internet draft

titles.

Italic text like this

Configure the machine’s domain name:

[edit]

root@# set system domain-name

domain-name

Represents variables (options for which

you substitute a value) in commands or

configuration statements.

Italic text like this

■

To configure a stub area, include

the stub statement at the [edit

protocols ospf area area-id]

hierarchy level.

■

The console port is labeled

CONSOLE.

Represents names of configuration

statements, commands, files, and

directories; IP addresses; configuration

hierarchy levels; or labels on routing

platform components.

Plain text like this

stub <default-metric metric>;

Enclose optional keywords or variables.< > (angle brackets)

xiv ■ Documentation Conventions

SRX100 Services Gateway Hardware Guide

Table 2: Text and Syntax Conventions (continued)

ExamplesDescriptionConvention

broadcast | multicast

(string1 | string2 | string3)

Indicates a choice between the mutually

exclusive keywords or variables on either

side of the symbol. The set of choices is

often enclosed in parentheses for clarity.

| (pipe symbol)

rsvp { # Required for dynamic MPLS only

Indicates a comment specified on the

same line as the configuration statement

to which it applies.

# (pound sign)

community name members [

community-ids ]

Enclose a variable for which you can

substitute one or more values.

[ ] (square brackets)

[edit]

routing-options {

static {

route default {

nexthop address;

retain;

}

Identify a level in the configuration

hierarchy.

Indention and braces ( { } )

Identifies a leaf statement at a

configuration hierarchy level.

; (semicolon)

J-Web GUI Conventions

■

In the Logical Interfaces box, select

All Interfaces.

■

To cancel the configuration, click

Cancel.

Represents J-Web graphical user

interface (GUI) items you click or select.

Bold text like this

In the configuration editor hierarchy,

select Protocols>Ospf.

Separates levels in a hierarchy of J-Web

selections.

> (bold right angle bracket)

SRX Series Documentation and Release Notes

For a list of related SRX Series documentation, see

http://www.juniper.net/techpubs/hardware/srx-series-main.html.

If the information in the latest SRX Series Release Notes differs from the information

in the documentation, follow the SRX Series Release Notes.

Obtaining Documentation

To obtain the most current version of all Juniper Networks technical documentation,

see the products documentation page on the Juniper Networks website at

http://www.juniper.net/techpubs.

To order printed copies of this guide and other Juniper Networks technical documents,

or to order a documentation CD, which contains this guide, contact your sales

representative.

SRX Series Documentation and Release Notes ■ xv

About This Guide

Copies of the Management Information Bases (MIBs) available in a software release

are included on the documentation CDs and at http://www.juniper.net.

Documentation Feedback

We encourage you to provide feedback, comments, and suggestions so that we can

improve the documentation. You can send your comments to

[email protected], or fill out the documentation feedback form at

http://www.juniper.net/techpubs/docbug/docbugreport.html. If you are using e-mail, be sure

to include the following information with your comments:

■ Document name

■ Document part number

■ Page number

■ Software release version (not required for Network Operations Guides [NOGs])

Requesting Technical Support

Technical product support is available through the Juniper Networks Technical

Assistance Center (JTAC). If you are a customer with an active J-Care or JNASC support

contract, or are covered under warranty, and need postsales technical support, you

can access our tools and resources online or open a case with JTAC.

■ JTAC policies—For a complete understanding of our JTAC procedures and policies,

review the JTAC User Guide, located at

http://www.juniper.net/customers/support/downloads/710059.pdf.

■ Product warranties—For product warranty information, visit

http://www.juniper.net/support/warranty/.

■ JTAC Hours of Operation—The JTAC centers have resources available 24 hours

a day, 7 days a week, 365 days a year.

Self-Help Online Tools and Resources

For quick and easy problem resolution, Juniper Networks has designed an online

self-service portal called the Customer Support Center (CSC) that provides you with

the following features:

■

Find CSC offerings: http://www.juniper.net/customers/support/

■

Search for known bugs: http://www2.juniper.net/kb/

■

Find product documentation: http://www.juniper.net/techpubs/

■ Find solutions and answer questions using our Knowledge Base:

http://kb.juniper.net/

■ Download the latest versions of software and review release notes:

http://www.juniper.net/customers/csc/software/

■ Search technical bulletins for relevant hardware and software notifications:

https://www.juniper.net/alerts/

xvi ■ Documentation Feedback

SRX100 Services Gateway Hardware Guide

■ Join and participate in the Juniper Networks Community Forum:

http://www.juniper.net/company/communities/

■

Open a case online in the CSC Case Manager: http://www.juniper.net/cm/

To verify service entitlement by product serial number, use our Serial Number

Entitlement (SNE) tool located at https://tools.juniper.net/SerialNumberEntitlementSearch/.

Opening a Case with JTAC

You can open a case with JTAC on the Web or by telephone.

■

Use the Case Manager tool in the CSC at http://www.juniper.net/cm/.

■ Call 1-888-314-JTAC (1-888-314-5822 toll-free in the USA, Canada, and Mexico).

For international or direct-dial options in countries without toll-free numbers, visit

us at http://www.juniper.net/support/requesting-support.html.

Requesting Technical Support ■ xvii

About This Guide

xviii ■ Requesting Technical Support

SRX100 Services Gateway Hardware Guide

Part 1

SRX100 Services Gateway Overview

■ Introduction to the SRX100 Services Gateway on page 3

■ SRX100 Services Gateway Hardware Components and Specifications on page 5

SRX100 Services Gateway Overview ■ 1

2 ■ SRX100 Services Gateway Overview

SRX100 Services Gateway Hardware Guide

La pagina sta caricando ...

Juniper SRX100 Manuale utente

Juniper SRX100 Manuale utente

in altre lingue

Documenti correlati

Altri documenti