Trendnet RB-TPL-430AP Guida utente

Categoria
Adattatori di rete PowerLine
Tipo
Guida utente

Questo manuale è adatto anche per

TRENDnet User’s Guide
Cover Page
© Copyright 2016 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
Table of Contents
i
Contents
Product Overview ........................................................................... 1
Package Contents .......................................................................................................... 1
Features ......................................................................................................................... 1
Product Hardware Features........................................................................................... 3
TPL-430AP ............................................................................................................ 3
TPL-423E .............................................................................................................. 4
Expanding a Powerline Network ...................................................... 5
Basic Installation ............................................................................................................ 1
Configure your Powerline Access Point ............................................ 3
Access your access point management page ................................................................ 3
Setting up your TPL-430AP ............................................................................................ 4
Connect wireless devices to your powerline access point ............................................ 5
Connect wireless devices using WiFi Clone / WPS ........................................................ 6
Setup .............................................................................................................................. 7
Advanced Wireless ........................................................................................................ 9
Advanced ............................................................................................................. 9
Network ............................................................................................................. 10
Security .............................................................................................................. 10
System ......................................................................................................................... 11
Device Management .......................................................................................... 11
Restore .............................................................................................................. 11
Firmware Update ............................................................................................... 12
Status ........................................................................................................................... 13
Clients ................................................................................................................ 13
Installing your Powerline Adapters ................................................ 14
Before you Install ......................................................................................................... 14
Connect a Powerline adapter to your router .............................................................. 14
Add adapters to your network .................................................................................... 15
Securing your Powerline Network ................................................. 16
Troubleshooting ........................................................................... 17
Technical Specifications ................................................................ 19
Appendix ...................................................................................... 22
© Copyright 2016 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TPL-430AP / TPL-430APK
1
Product Overview
TPL-430AP TPL-430APK
Package Contents
TPL-430AP package includes:
TPL-430AP
Quick Installation Guide
Network cable (1.5 m / 5 ft.)
TPL-430APK package includes:
TPL-430AP
TPL-423E
Quick Installation Guide
2 x network cables (1.5 m / 5 ft.)
If any package contents are missing or damaged, please contact the retail store, online
retailer, or reseller/distributor from which the product was purchased.
Features
WiFi Everywhere™ Powerline 1200 AV2 Access Point (TPL-430AP)
TRENDnet’s WiFi Everywhere™ Powerline 1200 AV2 Access Point, model TPL-430AP,
uses an electrical outlet to create or expand a wireless network. Two Powerline
adapters are needed to start a network. Connect one Powerline adapter to the router,
and plug the TPL-430AP into a power outlet in another room where WiFi connectivity is
needed. The WiFi Clone feature conveniently copies your existing wireless network
settings to the TPL-430AP for faster network integration.
WiFi Everywhere™ Powerline 1200 AV2 Wireless Kit (TPL-430APK)
TRENDnet’s WiFi Everywhere™ Powerline 1200 AV2 Wireless Kit, model TPL-430APK,
uses an electrical outlet to create or expand a wireless network. Easily install the
included TRENDnet Powerline adapters to create a high-speed powerline network.
Connect the TPL-423E to the router and plug the TPL-430AP into a power outlet in
another room where WiFi connectivity is needed. The WiFi Clone button conveniently
copies your existing wireless network settings to the TPL-430AP for faster network
integration.
Powerline
Sync Button
Press the Sync button to change existing Powerline encryption keys
Powerline 1200
Powerline 1200 networking over existing electrical lines using all three
electrical wires: the live, neutral, and ground wires to achieve faster
throughput speeds
Gigabit Ports
Convenient gigabit ports to hardwire computers, smart TVs, or other
network enabled devices
© Copyright 2016 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TPL-430AP / TPL-430APK
2
Compatibility
Backward compatible with Powerline 600, 500, and 200 adapters
MIMO with Beamforming Technology
Enhanced performance and range
Multiple Adapters
Use up to 8 adapters on a single Powerline network
Easy Installation
TRENDnet adapters auto-connect out of the box
Wireless
Concurrent Dual Band
AC1200: concurrent 867Mbps WiFi AC + 300Mbps WiFi N bands
Wireless Coverage
Expand your wireless coverage with MIMO antenna technology
Pre-Encrypted
For your convenience, the wireless is pre-encrypted with a unique
password
WiFi Clone
Use your router’s WPS button and the TPL-430AP’s WiFi Clone button to
conveniently copy your existing wireless network name and password for
quick network integration.
* Maximum wireless signal rates are referenced from IEEE 802.11 theoretical
specifications. Actual data throughput and coverage will vary depending on interference,
network traffic, building materials and other conditions
** 1200 Mbps is the maximum physical Powerline data rate. Data throughput may vary
by circuit wire condition overheads. Maximum of 8 adapters (nodes) recommended for
streaming video across your network.
*** Powerline networking is limited to the same electrical system. Power strips, GFCI
outlets, and AFCI circuit breakers may degrade Powerline signals.
© Copyright 2016 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TPL-430AP / TPL-430APK
3
Product Hardware Features
TPL-430AP
Hardware Power Prongs
Button
Action
Function
Sync
Sync
Push then release
Initiate Sync/Connection and generate random network
name/key (PL LED will start blinking).
Note: The secondary or additional Powerline adapter’s
Sync button must also be pushed within 2 minutes (120
sec) of pushing the Sync button on the first adapter in
order to establish connectivity.
Reset
Reset
Push/Hold for 1
seconds,
then release
Reset device to factory defaults (WLAN LED will go red).
Note: Will reset to the factory default private network
name “HomePlug AV”.
WiFi Clone
WPS
Push/Hold for 10
seconds, then release
Activates WiFi Clone. The 2.4 & 5 GHz LED will blink to
indicate WiFI Clone has been successfully activated.
© Copyright 2016 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TPL-430AP / TPL-430APK
4
TPL-423E
Important Note: Please note that the TPL-423E powerline adapter will only be
included when purchasing the WiFi Everywhere™ Powerline 1200 AV2 Wireless
Kit, model TPL-430APK.
Front View
Power Prong Plugs into an available power outlet.
LED
Color
Sequence
Definition
Power
Green
Solid
Device powered on
N/A
Off
Device powered off
2.4 GHz
Green
Solid
Wireless enabled, data transmitting/receiving
Green
Blinking
WiFi Clone is enabled
N/A
Off
Wireless disabled
5 GHz
Green
Solid
Wireless enabled, data transmitting/receiving
Green
Blinking
WiFi Clone is enabled
N/A
Off
Wireless disabled
DATA
(Powerline)
Green
Solid
Powerline connected (Connection quality is Best)
Blinking
Syncing or Powerline data transmitting/receiving
(Connection quality is Best)
Amber
Solid
Powerline connected (Connection quality is Better)
Blinking
Powerline data transmitting/receiving (Connection
quality is Better)
Red
Solid
Powerline connected (Connection quality is Good)
Blinking
Powerline data transmitting/receiving (Connection
quality is Good)
N/A
Off
Powerline is not synced or connected
LAN Ports
(Ethernet
Connection)
Green
Solid
10/20 Mbps, 100/200Mbps, Gigabit
(Half/Full Duplex) connected
Blinking
10/20 Mbps, 100/200Mbps, Gigabit
(Half/Full Duplex) data transmitting/receiving
N/A
Off
Port disconnected/no Ethernet link
Button
Action
Function
Link /
Reset
(see the
section
Using the
Sync Button
for
instructions)
Link
Push
then release
Initiate Link/Connection and generate random
network name/key (DATA LED will go off then
return to solid after connection is made).
Note: The secondary or additional Powerline
adapter’s Link button must also be pushed within 2
minutes (120 sec) of pushing the Link button on the
first adapter in order to establish connectivity.
Reset
Push/Hold for 1
seconds,
then release
Reset device to factory defaults (All LEDs will turn
off and turn back on).
Note: Will reset to the factory default private
network name “HomePlug AV”.
Network Port
LED Indicators
Sync Button
© Copyright 2016 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TPL-430AP / TPL-430APK
5
Diagnostic LEDs Indicates the device status and connectivity.
Note: The following factors may affect the Powerline network’s connection quality:
Noise Generated by appliances which use your electrical system (e.g.
Microwaves, ovens, blow dryer, iron, dishwasher, etc.). The quality of your
household electrical wiring may also cause additional noise on your electrical
system.
Distance Long lengths of electrical wiring through your electrical system
between connected Powerline adapters.
Power Saving: The device will automatically reduce power usage when the connected
device via Ethernet is powered off, unplugged or inactive for more than 5 minutes. The
device will return to active mode when the connected device via Ethernet is powered on
and the link is active.
Note: This device offers EU compliant Standby mode functionality. To turn off the device,
flip the switch to the off position or unplug it from the power outlet.
Expanding a Powerline Network
What is a network?
A network is a group of computers or devices that can communicate with each other. A
home network of more than one computer or device also typically includes Internet
access, which requires a router.
A typical home network may include multiple computers, a media player/server, a
printer, a modem, and a router. A large home network may also have a switch,
additional routers, access points, and many Internet-capable media devices such as TVs,
game consoles, and Internet cameras.
Modem Connects a computer or router to the Internet or ISP (Internet Service
Provider).
Router Connects multiple devices to the Internet.
Switch Connect several wired network devices to your home network. Your
router has a built-in network switch (the LAN port 1-4). If you have more wired
network devices than available Ethernet ports on your router, you will need an
additional switch to add more wired connections.
How to expand a home network
Wireless Access Points add or extend wireless connectivity to an existing network.
Integrated Powerline technology allows you to further extend your network using your
existing electrical system in your home using multiple powerline adapters.
Where to find more help
In addition to this User’s Guide, you can find help below:
http://www.trendnet.com/support (documents, downloads, and FAQs are
available from this Web page)
LED
Color
Sequence
Definition
POWER
Green
On
Device powered on
N/A
Off
Device powered off
LAN
Green
On
10/20 Mbps, 100/200Mbps, Gigabit
(Half/Full Duplex) connected
N/A
Off
Port disconnected/no Ethernet link
DATA
(Powerline)
Green
On
Powerline connected
Blinking
Syncing or Powerline data
transmitting/receiving (Connection quality is
Best)
N/A
Off
Powerline is not synced or connected
© Copyright 2016 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TPL-430AP / TPL-430APK
1
Basic Installation
Note: It is recommended to plug the adapters into nearby outlets before installing the devices to the desired locations.
Note: If you are connecting the adapters to a third-party powerline device other than TRENDnet and encounter issues, please refer to the manufacturer’s documentation for the
appropriate sync button procedure.
Note: The sync button procedure steps below demonstrate using TRENDnet powerline model TPL-423E (included with the WiFi Everywhere™ Powerline 1200 AV2 Wireless Kit only) but the
same procedure applies to TRENDnet powerline models TPL-406E / TPL-407E / TPL-420E / TPL-421E./ TPL-422E / TPL-423E
Connecting the adapters using Powerline
© Copyright 2016 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TPL-430AP / TPL-430APK
2
5. Once you have successfully connected the powerline adapters through the electrical system, you can move the TPL-430AP to the desired location to create or extend wireless
connectivity to your existing network.
6. For added security the TPL-430AP has been pre-configured with a unique wireless network name (SSID) and wireless key which can be found on the Preset Wireless Settings sticker or
device label. Use these settings to connect your wireless laptops, mobile devices, and other wireless network devices to your network.
Move TPL-430AP to the desired location and connect your wireless network devices
© Copyright 2017 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TPL-430AP / TPL-430APK
3
Configure your Powerline Access Point
Access your access point management page
Note: Your access point management page default IP address http://192.168.10.1 (when
the computer is connected directly to TPL-430AP’s LAN port) is accessed through the use
of your Internet web browser (e.g. Internet Explorer®, Firefox®, Chrome™, Safari®,
Opera™) and will be referenced frequently in this User’s Guide.
1. Plug the device into an available wall power outlet within reach of your computer’s
network cable.
2. Connect a network cable from your wireless access point network port into your
computer’s network port.
3. Assign a static IP address to your computer’s network adapter in the subnet of
192.168.10.x (ex. 192.168.10.25) and a subnet mask of 255.255.255.0. (Please refer to
the Appendix on page 55 on how to assign static IP address to your computer)
4. Open your web browser and go to IP address http://192.168.10.1 or (when the
computer is connected directly to TPL-430AP’s LAN port). Your access point will
prompt you for a user name and password.
5. By default, the user name is admin and password is located on the Preset Wireless
Setting Sticker. You can also find the Password on a sticker on the side of the access
point and on the device label on the back of the access point. Enter your Username and
Password, select your preferred language, and then click Login.
Note: If you have changed the password already such as in the Setup Wizard, you will
need to login using the new password.
Default User Name: admin
Default Password:
Note: User Name and Password are case sensitive.
© Copyright 2017 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TPL-430AP / TPL-430APK
4
Setting up your TPL-430AP
Setup > Wireless
1. Log into your access point management page
2. Go to Setup and click on Wireless
3. TPL-430AP has pre-configured wireless settings. You can keep the default
settings or change it to your own settings. Click Save to save your settings.
Note: Checking the Use the same SSID and security settings for both 2.4 GHz
and 5 GHz bands box, will change the SSID, Wireless security mode, and
wireless password on the 5 GHz band to match the exact same settings inputted
on the 2.4 GHz band.
4. Go to System and click on Change password.
5. Configure your own unique login password in the fields below.
Note: As a precaution, it is highly recommended that you change your login
password.
.
© Copyright 2017 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TPL-430AP / TPL-430APK
5
Connect wireless devices to your powerline access point
A variety of wireless network devices can connect to your wireless network such as:
Gaming Consoles
Internet enabled TVs
Network media players
Smart Phones
Wireless Laptop computers
Wireless IP cameras
Each device may have its own software utility for searching and connecting to available
wireless networks, therefore, you must refer to the User’s Manual/Guide of your
wireless client device to determine how to search and connect to this access point’s
wireless network.
© Copyright 2017 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TPL-430AP / TPL-430APK
6
Connect wireless devices using WiFi Clone / WPS
WiFi Clone is a feature that makes it easy to setup your TPL-430AP to connect to your
network. This feature allows your TPL-430AP to copy your router’s existing settings (ex:
Wireless SSID, Wireless Password etc.) to your TPL-430AP. If your router supports WPS,
you can use WiFi Clone to easily connect your TPL-430AP to your router.
Note: WiFi Clone will only copy your router’s 2.4GHz settings and apply it to both bands
of your TPL-430AP.
WPS (Wi-Fi Protected Setup) is a feature that makes it easy to connect devices to your
wireless network. If your wireless devices support WPS, you can use this feature to
easily add wireless devices to your network.
Note: You will not be able to use WPS if you set the SSID Broadcast setting to Disabled or
if you are using WEP or WPA security. Please note that WPS functionality will only be
available when using WPA2 security.
There are two methods the WPS feature can easily connect your wireless devices to
your network.
Push Button Configuration (PBC) method
(RECOMMENDED) Hardware Push Button methodwith an external button
located physically on your access point and on your client device
WPS Software/Virtual Push Button - located in access point management page
Recommended WiFi Clone Method
Note: It is recommended that a wireless key (passphrase or password) is created
before connecting the TPL-430AP using the WiFi Clone method. By default, your
access point is preconfigured with a wireless encryption key. If no wireless key is
defined when connecting via PBC, the access point will automatically create an
encryption key that is 64 characters long. This 64-character key will then have to be
used if one has to connect computers to the access point using the traditional
connection method.
PBC (Software/Virtual Push Button)
Advanced > WPS
In addition to the hardware push button located physically on your access point, the
access point management page also has push button which is a software or virtual push
button you can click to activate WPS on your access point.
1. Log into your powerline’s access point management page.
2. Click on Advanced, and click on WPS.
3. Select Enable WPS to enable WPS on the given band (2.4 GHz or 5 GHz).
4. Click WPS under Start section to start pairing.
4. Within 2 minutes, push the WPS button on the wireless device (consult wireless
device’s User’s Guide for length of time) you are connecting. The wireless connection
between the wireless client device and your access point will automatically be
established.
© Copyright 2017 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TPL-430AP / TPL-430APK
7
Setup
Wireless Security
Advanced > Wireless Security
How to choose the type of security for your wireless network
There are a few different wireless security types supported in wireless networking each
having its own characteristics which may be more suitable for your wireless network
taking into consideration compatibility, performance, as well as the security strength
along with using older wireless networking hardware (also called legacy hardware).
It is strongly recommended to enable wireless security to prevent unwanted users from
accessing your network and network resources (personal documents, media, etc.).
In general, it is recommended that you choose the security type with the highest strength
and performance supported by the wireless computers and devices in your network.
Please review the security types to determine which one you should use for your network.
Wireless Encryption Types
WPA: This encryption is significantly more robust than the WEP technology. Much of
the older 802.11g hardware was been upgraded (with firmware/driver upgrades) to
support this encryption standard. Total wireless speeds under this encryption type
however are limited to 54Mbps.
WPA2: This is the most secure wireless encryption available today, similar to WPA
encryption but more robust. This encryption standard also supports the highest
connection speeds. TRENDnet recommends setting your access point to this
encryption standard. If you find that one of your wireless network devices does not
support WPA2 encryption, then set your access point to either WPA or WPA-Auto
encryption.
Note: Check the specifications of your wireless network adapters and wireless
appliances to verify the highest level of encryption supported. Below is brief
comparison chart of the wireless security types and the recommended configuration
depending on which type you choose for your wireless network.
Security Standard
WPA
WPA2
Compatible
Wireless
Standards
IEEE 802.11b/g
(802.11n devices
will operate at
802.11g to connect
using this
standard)
IEEE 802.11b/g/n
Highest
Performance
Under This
Setting
Up to 54Mbps
Up to 300Mbps
Encryption
Strength
Medium
High
Additional
Options
TKIP or AES,
Preshared Key or
RADIUS
TKIP or AES,
Preshared Key or
RADIUS
Recommended
Configuration
TKIP
Preshared Key
8-63 characters
AES
Preshared Key
8-63 characters
© Copyright 2017 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TPL-430AP / TPL-430APK
8
Steps to improve wireless connection
There are a number of factors that can impact the range of wireless devices. Follow
these tips to help improve your wireless connectivity:
1. Keep the number of obstructions to a minimum. Each obstruction can reduce
the range of a wireless device. Position the wireless devices in a manner that
will minimize the amount of obstructions between them.
a. For the widest coverage area, install your access point near the center
of your home, and near the ceiling, if possible.
b. Avoid placing the access point on or near metal objects (such as file
cabinets and metal furniture), reflective surfaces (such as glass or
mirrors), and masonry walls.
c. Any obstruction can weaken the wireless signal (even non-metallic
objects), so the fewer obstructions between the access point and the
wireless device, the better.
d. Place the access point in a location away from other electronics,
motors, and fluorescent lighting.
e. Many environmental variables can affect the access point’s
performance, so if your wireless signal is weak, place the access point
in several locations and test the signal strength to determine the ideal
position.
2. Building materials can have a large impact on your wireless signal. In an indoor
environment, try to position the wireless devices so that the signal passes
through less dense material such as dry wall. Dense materials like metal, solid
wood, glass or even furniture may block or degrade the signal.
3. Antenna orientation can also have a large impact on your wireless signal. Use
the wireless adapter’s site survey tool to determine the best antenna
orientation for your wireless devices.
4. Interference from devices that produce RF (radio frequency) noise can also
impact your signal. Position your wireless devices away from anything that
generates RF noise, such as microwaves, radios and baby monitors.
If possible, upgrade wireless network interfaces (such as wireless cards in computers)
from older wireless standards to 802.11n or 802.11ac. If a wirelessly networked device
uses an older standard, the performance of the entire wireless network may be slower.
If you are still experiencing low or no signal consider repositioning the wireless devices,
installing additional access points or wireless extenders.
© Copyright 2017 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TPL-430AP / TPL-430APK
9
Advanced Wireless
Advanced > Wireless Settings
Advanced
These settings are advanced options that can be configured to change advanced
wireless broadcast specifications. It is recommended that these settings remain set to
their default values unless you are knowledgeable about the effects of changing these
values. Changing these settings incorrectly can degrade performance.
1. Log into your powerline access point management page.
2. Click on Advanced and click on Wireless Settings.
3. Review the basic wireless settings and click Apply when finished.
Enable SSID Check the option to enable the wireless network/band or uncheck to
disable. Note: It is recommended to leave this setting checked.
SSID: Enter the wireless name (SSID) for your wireless network.
This acronym stands for Service Set Identifier and is the name of your wireless
network. It differentiates your wireless network from others around you. By default,
the access point’s wireless name is unique to the device. If you choose to change the
SSID, change it to a name that you can easily remember.
User Isolation: Enabling this option allows other clients to not see other clients on
the same network.
WMM Advertise: Enabling this option turns on QoS for your AP. By default, the
option is enabled.
Wireless interface type: If all of the wireless devices you want to connect with this
Access Point can connect in the same transmission mode, you can improve
performance slightly by choosing the appropriate mode. If you have some devices
that use a different transmission mode, choose the appropriate mode.
2.4 GHz Wireless
B/G/N mixed: Select this mode for the best compatibility. This mode allows
older 802.11b and 802.11g wireless devices to connect to the access point in
addition to newer 802.11n devices.
B/G mixed: This mode only allows devices to connect to the access point
using older and slow 802.11b or 802.11g technology and it thereby reduces
the router’s maximum speed to 54Mbps (typically not recommended).
N only: This mode only allows newer 802.11n devices to connect to your
access point. This mode does ensure the highest speed and security for your
network, however, if you have older 802.11g wireless clients, they will no
longer be able to connect to this router.
Note: Please check the specifications on your wireless devices for the highest
wireless capability supported first before applying these settings. If you are
unsure, it is recommended that you keep the default setting (B/G/N mixed)
for the best compatibility.
5 GHz Wireless
A only: This mode only allows devices to connect to the access point using
older and slower 802.11a technology (typically not recommended).
A/N mixed: This mode only allows devices to connect to the access point
using older and slower 802.11a or 802.11n technology and it thereby reduces
the access point’s maximum speed to 54Mbps (typically not recommended).
A/N/AC mixed: Select this mode for the best compatibility. This mode allows
older 802.11a and 802.11n wireless devices to connect to the access point in
addition to newer 802.11ac devices.
Note: Please check the specifications on your wireless devices for the highest
wireless capability supported first before applying these settings. If you are
unsure, it is recommended that you keep the default setting (A/N/AC mixed)
for the best compatibility.
© Copyright 2017 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TPL-430AP / TPL-430APK
10
Band Width: Select the channel width for the access point to operate on. By
default, the access point is on 40 MHz.
Wireless Channels: In North America, this access point can broadcast on 1 of 11
Channels for 2.4 GHz (13 in Europe and other countries). Selecting the Auto option
enables the access point to automatically select the best Channel for wireless
communication. To manually set the channel on which the router will broadcast,
click the drop-down list and select the desired Channel for wireless communication.
The goal is to select the Channel that is least used by neighboring wireless
networks.
Transmit Power: The wireless transmit power can be modified to lower the
antenna strength setting from 100% to 20%, if necessary. Lowering the wireless
transmit power may help to better stabilize the wireless connectivity and reduce
the effects of wireless interference in areas where there are several 2.4 GHz and 5
GHz wireless devices. (Default: 100%)
Max Clients: Select the maximum number of clients that can connect to your AP. By
default, the max number of clients is set to 16 devices.
Network
Advanced > Network
Your TPL-430AP will automatically get its IP address when it is connected to your
modem or router. This page will show you the current IP address of your unit.
1. Log into your powerline access point management page.
2. Click on Advanced and click on Network.
Security
Advanced > Wireless Security
Setting up wireless security is very important. Leaving your wireless network open and
unsecure could expose your entire network and personal files to outsiders. TRENDnet
recommends reading through this entire section and setting up wireless security on your
new powerline access point. Refer to wireless basic sections on how to pick the right
security option for your network.
1. Log into your powerline access point management page.
2. Click on Advanced and click on Wireless security.
3. Select the radio band that you want to set the wireless password. (i.e.: 2.4 GHz or 5
GHz)
4. Select the Security Type from the drop-down menu
5. Input the new wireless network password/key
6. Click Save to save your settings.
© Copyright 2017 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TPL-430AP / TPL-430APK
11
System
Device Management
System > Change Password
This section provides instructions on configuring the login credentials to the TPL-430AP’s
Interface.
Note: It is highly recommended that you configure the login password.
1. Log in to TPL-430AP.
2. Go to System and select the Change password menu.
3. In the Old Password field, enter the old password. By default, the password is admin)
4. Enter the New Password, and enter it again in the Confirm Password field to verify.
5. Click Save to save your settings.
Note: If you change the access point login password, you will need to access the access
point management page using the User Name “admin” and the new password.
Restore
System > Restore
You may want to restart or restore your powerline access point if you are encountering
difficulties with your access point and have attempted all other troubleshooting.
1. Log in to TPL-430AP.
2. Go to System and select the Restore menu.
3. Click Restore to reset the device back to factory default settings.
4. Click OK to confirm your selection.
5. Your TPL-430AP will take about 3 minutes to reset and reboot back to factory default
settings.
Administrator User Name
admin
Administrator Password
Please refer to sticker or
device label
Access Point IP Address
http://tpl-430ap /
192.168.10.1
Access Point Subnet Mask
255.255.255.0
Wireless Interface
Enabled
Wireless Network Name/Encryption
(WPA2-PSK AES)
Please refer to sticker or
device label
Powerline Encryption Key
HomePlugAV
© Copyright 2017 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TPL-430AP / TPL-430APK
12
Firmware Update
System > Firmware update
TRENDnet may periodically release firmware upgrades that may add features or fix
problems associated with your TRENDnet access point model and version. To check if
there is a firmware upgrade available for your device, please check your TRENDnet model
and version using the link. http://www.trendnet.com/downloads/
In addition, it is also important to verify if the latest firmware version is newer than the
one your access point is currently running. To identify the firmware that is currently
loaded on your access point, log in to the access point, click on the Administrator section
and then on the Status. If there is a newer version available, also review the release notes
to check if there were any new features you may want or if any problems were fixed that
you may have been experiencing.
-If a firmware upgrade is available, download the firmware to your computer.
-Unzip the file to a folder on your computer.
Please note the following:
Do not interrupt the firmware upgrade process. Do not turn off the device or
press the Reset button during the upgrade.
If you are upgrade the firmware using a laptop computer, ensure that the laptop
is connected to a power source or ensure that the battery is fully charged.
Disable sleep mode on your computer as this may interrupt the firmware upgrade
process.
Do not upgrade the firmware using a wireless connection, only using a wired
network connection.
Any interruptions during the firmware upgrade process may permanently
damage your access point.
1. Log into your TPL-430AP’s management page.
2. Click on System and click on Firmware Update
3. Depending on your web browser, under Select File, click Browse or Choose File.
4. Navigate to the folder on your computer where the unzipped firmware file (.img)
is located and select it.
5. Click Save. If prompted, click Yes or Ok.
© Copyright 2017 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TPL-430AP / TPL-430APK
13
Status
System > Information
You may want to check the system information of your access point such as IP address
settings, access point mode, wireless and wired network settings, access point wireless
MAC addresses, and firmware version.
Clients
System > Clients
You may want to check to see what devices are currently connected to your TPL-430AP.
This page will show the number of clients that are connected, their IP address and the
clients’ MAC address.
1. Log into your TPL-430AP’s management page.
2. Click on System and click on Clients
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36

Trendnet RB-TPL-430AP Guida utente

Categoria
Adattatori di rete PowerLine
Tipo
Guida utente
Questo manuale è adatto anche per

in altre lingue