Trendnet TPL-430APK Guida utente

TRENDnet User’s Guide

Cover Page

                  
 
© Copyright 2016 TRENDnet. All Rights Reserved.     
 
 
TRENDnet User’s Guide 
Table of Contents 
i 
Contents 
Product Overview ........................................................................... 1 
Package Contents .......................................................................................................... 1 
Features ......................................................................................................................... 1 
Product Hardware Features........................................................................................... 3 
TPL-430AP ............................................................................................................ 3 
TPL-423E .............................................................................................................. 4 
Expanding a Powerline Network ...................................................... 5 
Basic Installation ............................................................................................................ 1 
Configure your Powerline Access Point ............................................ 3 
Access your access point management page ................................................................ 3 
Setting up your TPL-430AP ............................................................................................ 4 
Connect wireless devices to your powerline access point ............................................ 5 
Connect wireless devices using WiFi Clone / WPS ........................................................ 6 
Setup .............................................................................................................................. 7 
Advanced Wireless ........................................................................................................ 9 
Advanced ............................................................................................................. 9 
Network ............................................................................................................. 10 
Security .............................................................................................................. 10 
System ......................................................................................................................... 11 
Device Management .......................................................................................... 11 
Restore .............................................................................................................. 11 
Firmware Update ............................................................................................... 12 
Status ........................................................................................................................... 13 
Clients ................................................................................................................ 13 
Installing your Powerline Adapters ................................................ 14 
Before you Install ......................................................................................................... 14 
Connect a Powerline adapter to your router .............................................................. 14 
Add adapters to your network .................................................................................... 15 
Securing your Powerline Network ................................................. 16 
Troubleshooting ........................................................................... 17 
Technical Specifications ................................................................ 19 
Appendix ...................................................................................... 22 
 

TRENDnet User’s Guide

TPL-430AP / TPL-430APK

1

Product Overview

TPL-430AP TPL-430APK

Package Contents

TPL-430AP package includes:

• TPL-430AP

• Quick Installation Guide

• Network cable (1.5 m / 5 ft.)

TPL-430APK package includes:

• TPL-430AP

• TPL-423E

• Quick Installation Guide

• 2 x network cables (1.5 m / 5 ft.)

If any package contents are missing or damaged, please contact the retail store, online

retailer, or reseller/distributor from which the product was purchased.

Features

WiFi Everywhere™ Powerline 1200 AV2 Access Point (TPL-430AP)

TRENDnet’s WiFi Everywhere™ Powerline 1200 AV2 Access Point, model TPL-430AP,

uses an electrical outlet to create or expand a wireless network. Two Powerline

adapters are needed to start a network. Connect one Powerline adapter to the router,

and plug the TPL-430AP into a power outlet in another room where WiFi connectivity is

needed. The WiFi Clone feature conveniently copies your existing wireless network

settings to the TPL-430AP for faster network integration.

WiFi Everywhere™ Powerline 1200 AV2 Wireless Kit (TPL-430APK)

TRENDnet’s WiFi Everywhere™ Powerline 1200 AV2 Wireless Kit, model TPL-430APK,

uses an electrical outlet to create or expand a wireless network. Easily install the

included TRENDnet Powerline adapters to create a high-speed powerline network.

Connect the TPL-423E to the router and plug the TPL-430AP into a power outlet in

another room where WiFi connectivity is needed. The WiFi Clone button conveniently

copies your existing wireless network settings to the TPL-430AP for faster network

integration.

Powerline

Sync Button

Press the Sync button to change existing Powerline encryption keys

Powerline 1200

Powerline 1200 networking over existing electrical lines using all three

electrical wires: the live, neutral, and ground wires to achieve faster

throughput speeds

Gigabit Ports

Convenient gigabit ports to hardwire computers, smart TVs, or other

network enabled devices

TRENDnet User’s Guide

TPL-430AP / TPL-430APK

2

Compatibility

Backward compatible with Powerline 600, 500, and 200 adapters

MIMO with Beamforming Technology

Enhanced performance and range

Multiple Adapters

Use up to 8 adapters on a single Powerline network

Easy Installation

TRENDnet adapters auto-connect out of the box

Wireless

Concurrent Dual Band

AC1200: concurrent 867Mbps WiFi AC + 300Mbps WiFi N bands

Wireless Coverage

Expand your wireless coverage with MIMO antenna technology

Pre-Encrypted

For your convenience, the wireless is pre-encrypted with a unique

password

WiFi Clone

Use your router’s WPS button and the TPL-430AP’s WiFi Clone button to

conveniently copy your existing wireless network name and password for

quick network integration.

* Maximum wireless signal rates are referenced from IEEE 802.11 theoretical

specifications. Actual data throughput and coverage will vary depending on interference,

network traffic, building materials and other conditions

** 1200 Mbps is the maximum physical Powerline data rate. Data throughput may vary

by circuit wire condition overheads. Maximum of 8 adapters (nodes) recommended for

streaming video across your network.

*** Powerline networking is limited to the same electrical system. Power strips, GFCI

outlets, and AFCI circuit breakers may degrade Powerline signals.

TRENDnet User’s Guide

TPL-430AP / TPL-430APK

3

Product Hardware Features

TPL-430AP

Hardware Power Prongs

Button

Action

Function

Sync

Push then release

Initiate Sync/Connection and generate random network

name/key (PL LED will start blinking).

Note: The secondary or additional Powerline adapter’s

Sync button must also be pushed within 2 minutes (120

sec) of pushing the Sync button on the first adapter in

order to establish connectivity.

Reset

Push/Hold for 1

seconds,

then release

Reset device to factory defaults (WLAN LED will go red).

Note: Will reset to the factory default private network

name “HomePlug AV”.

WiFi Clone

WPS

Push/Hold for 10

seconds, then release

Activates WiFi Clone. The 2.4 & 5 GHz LED will blink to

indicate WiFI Clone has been successfully activated.

TRENDnet User’s Guide

TPL-430AP / TPL-430APK

4

Link/Reset Button

TPL-423E

Important Note: Please note that the TPL-423E powerline adapter will only be

included when purchasing the WiFi Everywhere™ Powerline 1200 AV2 Wireless

Kit, model TPL-430APK.

Front View

• Power Prong – Plugs into an available power outlet.

LED

Color

Sequence

Definition

Power

Green

Solid

Device powered on

N/A

Off

Device powered off

2.4 GHz

Green

Solid

Wireless enabled, data transmitting/receiving

Green

Blinking

WiFi Clone is enabled

N/A

Off

Wireless disabled

5 GHz

Green

Solid

Wireless enabled, data transmitting/receiving

Green

Blinking

WiFi Clone is enabled

N/A

Off

Wireless disabled

DATA

(Powerline)

Green

Solid

Powerline connected (Connection quality is Best)

Blinking

Syncing or Powerline data transmitting/receiving

(Connection quality is Best)

Amber

Solid

Powerline connected (Connection quality is Better)

Blinking

Powerline data transmitting/receiving (Connection

quality is Better)

Red

Solid

Powerline connected (Connection quality is Good)

Blinking

Powerline data transmitting/receiving (Connection

quality is Good)

N/A

Off

Powerline is not synced or connected

LAN Ports

(Ethernet

Connection)

Green

Solid

10/20 Mbps, 100/200Mbps, Gigabit

(Half/Full Duplex) connected

Blinking

10/20 Mbps, 100/200Mbps, Gigabit

(Half/Full Duplex) data transmitting/receiving

N/A

Off

Port disconnected/no Ethernet link

Button

Action

Function

Link /

Reset

(see the

section

Using the

Sync Button

for

instructions)

Link

Push

then release

Initiate Link/Connection and generate random

network name/key (DATA LED will go off then

return to solid after connection is made).

Note: The secondary or additional Powerline

adapter’s Link button must also be pushed within 2

minutes (120 sec) of pushing the Link button on the

first adapter in order to establish connectivity.

Reset

Push/Hold for 1

seconds,

then release

Reset device to factory defaults (All LEDs will turn

off and turn back on).

Note: Will reset to the factory default private

network name “HomePlug AV”.

Network Port

LED Indicators

Sync Button

TRENDnet User’s Guide

TPL-430AP / TPL-430APK

5

• Diagnostic LEDs – Indicates the device status and connectivity.

Note: The following factors may affect the Powerline network’s connection quality:

• Noise – Generated by appliances which use your electrical system (e.g.

Microwaves, ovens, blow dryer, iron, dishwasher, etc.). The quality of your

household electrical wiring may also cause additional noise on your electrical

system.

• Distance – Long lengths of electrical wiring through your electrical system

between connected Powerline adapters.

Power Saving: The device will automatically reduce power usage when the connected

device via Ethernet is powered off, unplugged or inactive for more than 5 minutes. The

device will return to active mode when the connected device via Ethernet is powered on

and the link is active.

Note: This device offers EU compliant Standby mode functionality. To turn off the device,

flip the switch to the off position or unplug it from the power outlet.

Expanding a Powerline Network

What is a network?

A network is a group of computers or devices that can communicate with each other. A

home network of more than one computer or device also typically includes Internet

access, which requires a router.

A typical home network may include multiple computers, a media player/server, a

printer, a modem, and a router. A large home network may also have a switch,

additional routers, access points, and many Internet-capable media devices such as TVs,

game consoles, and Internet cameras.

• Modem – Connects a computer or router to the Internet or ISP (Internet Service

Provider).

• Router – Connects multiple devices to the Internet.

• Switch –Connect several wired network devices to your home network. Your

router has a built-in network switch (the LAN port 1-4). If you have more wired

network devices than available Ethernet ports on your router, you will need an

additional switch to add more wired connections.

How to expand a home network

Wireless Access Points add or extend wireless connectivity to an existing network.

Integrated Powerline technology allows you to further extend your network using your

existing electrical system in your home using multiple powerline adapters.

Where to find more help

In addition to this User’s Guide, you can find help below:

• http://www.trendnet.com/support (documents, downloads, and FAQs are

available from this Web page)

LED

Color

Sequence

Definition

POWER

Green

On

Device powered on

N/A

Off

Device powered off

LAN

Green

On

10/20 Mbps, 100/200Mbps, Gigabit

(Half/Full Duplex) connected

N/A

Off

Port disconnected/no Ethernet link

DATA

(Powerline)

Green

On

Powerline connected

Blinking

Syncing or Powerline data

transmitting/receiving (Connection quality is

Best)

N/A

Off

Powerline is not synced or connected

TRENDnet User’s Guide

TPL-430AP / TPL-430APK

1

Basic Installation

Note: It is recommended to plug the adapters into nearby outlets before installing the devices to the desired locations.

Note: If you are connecting the adapters to a third-party powerline device other than TRENDnet and encounter issues, please refer to the manufacturer’s documentation for the

appropriate sync button procedure.

Note: The sync button procedure steps below demonstrate using TRENDnet powerline model TPL-423E (included with the WiFi Everywhere™ Powerline 1200 AV2 Wireless Kit only) but the

same procedure applies to TRENDnet powerline models TPL-406E / TPL-407E / TPL-420E / TPL-421E./ TPL-422E / TPL-423E

Connecting the adapters using Powerline

TRENDnet User’s Guide

TPL-430AP / TPL-430APK

2

5. Once you have successfully connected the powerline adapters through the electrical system, you can move the TPL-430AP to the desired location to create or extend wireless

connectivity to your existing network.

6. For added security the TPL-430AP has been pre-configured with a unique wireless network name (SSID) and wireless key which can be found on the Preset Wireless Settings sticker or

device label. Use these settings to connect your wireless laptops, mobile devices, and other wireless network devices to your network.

Move TPL-430AP to the desired location and connect your wireless network devices

TRENDnet User’s Guide

TPL-430AP / TPL-430APK

3

Configure your Powerline Access Point

Access your access point management page

Note: Your access point management page default IP address http://192.168.10.1 (when

the computer is connected directly to TPL-430AP’s LAN port) is accessed through the use

of your Internet web browser (e.g. Internet Explorer®, Firefox®, Chrome™, Safari®,

Opera™) and will be referenced frequently in this User’s Guide.

1. Plug the device into an available wall power outlet within reach of your computer’s

network cable.

2. Connect a network cable from your wireless access point network port into your

computer’s network port.

3. Assign a static IP address to your computer’s network adapter in the subnet of

192.168.10.x (ex. 192.168.10.25) and a subnet mask of 255.255.255.0. (Please refer to

the Appendix on page 55 on how to assign static IP address to your computer)

4. Open your web browser and go to IP address http://192.168.10.1 or (when the

computer is connected directly to TPL-430AP’s LAN port). Your access point will

prompt you for a user name and password.

5. By default, the user name is admin and password is located on the Preset Wireless

Setting Sticker. You can also find the Password on a sticker on the side of the access

point and on the device label on the back of the access point. Enter your Username and

Password, select your preferred language, and then click Login.

Note: If you have changed the password already such as in the Setup Wizard, you will

need to login using the new password.

Default User Name: admin

Default Password:

Note: User Name and Password are case sensitive.

TRENDnet User’s Guide

TPL-430AP / TPL-430APK

4

Setting up your TPL-430AP

Setup > Wireless

1. Log into your access point management page

2. Go to Setup and click on Wireless

3. TPL-430AP has pre-configured wireless settings. You can keep the default

settings or change it to your own settings. Click Save to save your settings.

Note: Checking the Use the same SSID and security settings for both 2.4 GHz

and 5 GHz bands box, will change the SSID, Wireless security mode, and

wireless password on the 5 GHz band to match the exact same settings inputted

on the 2.4 GHz band.

4. Go to System and click on Change password.

5. Configure your own unique login password in the fields below.

Note: As a precaution, it is highly recommended that you change your login

password.

.

TRENDnet User’s Guide

TPL-430AP / TPL-430APK

5

Connect wireless devices to your powerline access point

A variety of wireless network devices can connect to your wireless network such as:

• Gaming Consoles

• Internet enabled TVs

• Network media players

• Smart Phones

• Wireless Laptop computers

• Wireless IP cameras

Each device may have its own software utility for searching and connecting to available

wireless networks, therefore, you must refer to the User’s Manual/Guide of your

wireless client device to determine how to search and connect to this access point’s

wireless network.

TRENDnet User’s Guide

TPL-430AP / TPL-430APK

6

Connect wireless devices using WiFi Clone / WPS

WiFi Clone is a feature that makes it easy to setup your TPL-430AP to connect to your

network. This feature allows your TPL-430AP to copy your router’s existing settings (ex:

Wireless SSID, Wireless Password etc.) to your TPL-430AP. If your router supports WPS,

you can use WiFi Clone to easily connect your TPL-430AP to your router.

Note: WiFi Clone will only copy your router’s 2.4GHz settings and apply it to both bands

of your TPL-430AP.

WPS (Wi-Fi Protected Setup) is a feature that makes it easy to connect devices to your

wireless network. If your wireless devices support WPS, you can use this feature to

easily add wireless devices to your network.

Note: You will not be able to use WPS if you set the SSID Broadcast setting to Disabled or

if you are using WEP or WPA security. Please note that WPS functionality will only be

available when using WPA2 security.

There are two methods the WPS feature can easily connect your wireless devices to

your network.

• Push Button Configuration (PBC) method

• (RECOMMENDED) Hardware Push Button method–with an external button

located physically on your access point and on your client device

• WPS Software/Virtual Push Button - located in access point management page

Recommended WiFi Clone Method

• Note: It is recommended that a wireless key (passphrase or password) is created

before connecting the TPL-430AP using the WiFi Clone method. By default, your

access point is preconfigured with a wireless encryption key. If no wireless key is

defined when connecting via PBC, the access point will automatically create an

encryption key that is 64 characters long. This 64-character key will then have to be

used if one has to connect computers to the access point using the traditional

connection method.

PBC (Software/Virtual Push Button)

Advanced > WPS

In addition to the hardware push button located physically on your access point, the

access point management page also has push button which is a software or virtual push

button you can click to activate WPS on your access point.

1. Log into your powerline’s access point management page.

2. Click on Advanced, and click on WPS.

3. Select Enable WPS to enable WPS on the given band (2.4 GHz or 5 GHz).

4. Click WPS under Start section to start pairing.

4. Within 2 minutes, push the WPS button on the wireless device (consult wireless

device’s User’s Guide for length of time) you are connecting. The wireless connection

between the wireless client device and your access point will automatically be

established.

TRENDnet User’s Guide

TPL-430AP / TPL-430APK

7

Setup

Wireless Security

Advanced > Wireless Security

How to choose the type of security for your wireless network

There are a few different wireless security types supported in wireless networking each

having its own characteristics which may be more suitable for your wireless network

taking into consideration compatibility, performance, as well as the security strength

along with using older wireless networking hardware (also called legacy hardware).

It is strongly recommended to enable wireless security to prevent unwanted users from

accessing your network and network resources (personal documents, media, etc.).

In general, it is recommended that you choose the security type with the highest strength

and performance supported by the wireless computers and devices in your network.

Please review the security types to determine which one you should use for your network.

Wireless Encryption Types

• WPA: This encryption is significantly more robust than the WEP technology. Much of

the older 802.11g hardware was been upgraded (with firmware/driver upgrades) to

support this encryption standard. Total wireless speeds under this encryption type

however are limited to 54Mbps.

• WPA2: This is the most secure wireless encryption available today, similar to WPA

encryption but more robust. This encryption standard also supports the highest

connection speeds. TRENDnet recommends setting your access point to this

encryption standard. If you find that one of your wireless network devices does not

support WPA2 encryption, then set your access point to either WPA or WPA-Auto

encryption.

Note: Check the specifications of your wireless network adapters and wireless

appliances to verify the highest level of encryption supported. Below is brief

comparison chart of the wireless security types and the recommended configuration

depending on which type you choose for your wireless network.

Security Standard

WPA

WPA2

Compatible

Wireless

Standards

IEEE 802.11b/g

(802.11n devices

will operate at

802.11g to connect

using this

standard)

IEEE 802.11b/g/n

Highest

Performance

Under This

Setting

Up to 54Mbps

Up to 300Mbps

Encryption

Strength

Medium

High

Additional

Options

TKIP or AES,

Preshared Key or

RADIUS

TKIP or AES,

Preshared Key or

RADIUS

Recommended

Configuration

TKIP

Preshared Key

8-63 characters

AES

Preshared Key

8-63 characters

TRENDnet User’s Guide

TPL-430AP / TPL-430APK

8

Steps to improve wireless connection

There are a number of factors that can impact the range of wireless devices. Follow

these tips to help improve your wireless connectivity:

1. Keep the number of obstructions to a minimum. Each obstruction can reduce

the range of a wireless device. Position the wireless devices in a manner that

will minimize the amount of obstructions between them.

a. For the widest coverage area, install your access point near the center

of your home, and near the ceiling, if possible.

b. Avoid placing the access point on or near metal objects (such as file

cabinets and metal furniture), reflective surfaces (such as glass or

mirrors), and masonry walls.

c. Any obstruction can weaken the wireless signal (even non-metallic

objects), so the fewer obstructions between the access point and the

wireless device, the better.

d. Place the access point in a location away from other electronics,

motors, and fluorescent lighting.

e. Many environmental variables can affect the access point’s

performance, so if your wireless signal is weak, place the access point

in several locations and test the signal strength to determine the ideal

position.

2. Building materials can have a large impact on your wireless signal. In an indoor

environment, try to position the wireless devices so that the signal passes

through less dense material such as dry wall. Dense materials like metal, solid

wood, glass or even furniture may block or degrade the signal.

3. Antenna orientation can also have a large impact on your wireless signal. Use

the wireless adapter’s site survey tool to determine the best antenna

orientation for your wireless devices.

4. Interference from devices that produce RF (radio frequency) noise can also

impact your signal. Position your wireless devices away from anything that

generates RF noise, such as microwaves, radios and baby monitors.

If possible, upgrade wireless network interfaces (such as wireless cards in computers)

from older wireless standards to 802.11n or 802.11ac. If a wirelessly networked device

uses an older standard, the performance of the entire wireless network may be slower.

If you are still experiencing low or no signal consider repositioning the wireless devices,

installing additional access points or wireless extenders.

TRENDnet User’s Guide

TPL-430AP / TPL-430APK

9

Advanced Wireless

Advanced > Wireless Settings

Advanced

These settings are advanced options that can be configured to change advanced

wireless broadcast specifications. It is recommended that these settings remain set to

their default values unless you are knowledgeable about the effects of changing these

values. Changing these settings incorrectly can degrade performance.

1. Log into your powerline access point management page.

2. Click on Advanced and click on Wireless Settings.

3. Review the basic wireless settings and click Apply when finished.

• Enable SSID – Check the option to enable the wireless network/band or uncheck to

disable. Note: It is recommended to leave this setting checked.

• SSID: Enter the wireless name (SSID) for your wireless network.

This acronym stands for Service Set Identifier and is the name of your wireless

network. It differentiates your wireless network from others around you. By default,

the access point’s wireless name is unique to the device. If you choose to change the

SSID, change it to a name that you can easily remember.

• User Isolation: Enabling this option allows other clients to not see other clients on

the same network.

• WMM Advertise: Enabling this option turns on QoS for your AP. By default, the

option is enabled.

• Wireless interface type: If all of the wireless devices you want to connect with this

Access Point can connect in the same transmission mode, you can improve

performance slightly by choosing the appropriate mode. If you have some devices

that use a different transmission mode, choose the appropriate mode.

2.4 GHz Wireless

• B/G/N mixed: Select this mode for the best compatibility. This mode allows

older 802.11b and 802.11g wireless devices to connect to the access point in

addition to newer 802.11n devices.

• B/G mixed: This mode only allows devices to connect to the access point

using older and slow 802.11b or 802.11g technology and it thereby reduces

the router’s maximum speed to 54Mbps (typically not recommended).

• N only: This mode only allows newer 802.11n devices to connect to your

access point. This mode does ensure the highest speed and security for your

network, however, if you have older 802.11g wireless clients, they will no

longer be able to connect to this router.

• Note: Please check the specifications on your wireless devices for the highest

wireless capability supported first before applying these settings. If you are

unsure, it is recommended that you keep the default setting (B/G/N mixed)

for the best compatibility.

5 GHz Wireless

• A only: This mode only allows devices to connect to the access point using

older and slower 802.11a technology (typically not recommended).

• A/N mixed: This mode only allows devices to connect to the access point

using older and slower 802.11a or 802.11n technology and it thereby reduces

the access point’s maximum speed to 54Mbps (typically not recommended).

• A/N/AC mixed: Select this mode for the best compatibility. This mode allows

older 802.11a and 802.11n wireless devices to connect to the access point in

addition to newer 802.11ac devices.

• Note: Please check the specifications on your wireless devices for the highest

wireless capability supported first before applying these settings. If you are

unsure, it is recommended that you keep the default setting (A/N/AC mixed)

for the best compatibility.

TRENDnet User’s Guide

TPL-430AP / TPL-430APK

10

• Band Width: Select the channel width for the access point to operate on. By

default, the access point is on 40 MHz.

• Wireless Channels: In North America, this access point can broadcast on 1 of 11

Channels for 2.4 GHz (13 in Europe and other countries). Selecting the Auto option

enables the access point to automatically select the best Channel for wireless

communication. To manually set the channel on which the router will broadcast,

click the drop-down list and select the desired Channel for wireless communication.

The goal is to select the Channel that is least used by neighboring wireless

networks.

• Transmit Power: The wireless transmit power can be modified to lower the

antenna strength setting from 100% to 20%, if necessary. Lowering the wireless

transmit power may help to better stabilize the wireless connectivity and reduce

the effects of wireless interference in areas where there are several 2.4 GHz and 5

GHz wireless devices. (Default: 100%)

• Max Clients: Select the maximum number of clients that can connect to your AP. By

default, the max number of clients is set to 16 devices.

Network

Advanced > Network

Your TPL-430AP will automatically get its IP address when it is connected to your

modem or router. This page will show you the current IP address of your unit.

1. Log into your powerline access point management page.

2. Click on Advanced and click on Network.

Security

Advanced > Wireless Security

Setting up wireless security is very important. Leaving your wireless network open and

unsecure could expose your entire network and personal files to outsiders. TRENDnet

recommends reading through this entire section and setting up wireless security on your

new powerline access point. Refer to wireless basic sections on how to pick the right

security option for your network.

1. Log into your powerline access point management page.

2. Click on Advanced and click on Wireless security.

3. Select the radio band that you want to set the wireless password. (i.e.: 2.4 GHz or 5

GHz)

4. Select the Security Type from the drop-down menu

5. Input the new wireless network password/key

6. Click Save to save your settings.

TRENDnet User’s Guide

TPL-430AP / TPL-430APK

11

System

Device Management

System > Change Password

This section provides instructions on configuring the login credentials to the TPL-430AP’s

Interface.

Note: It is highly recommended that you configure the login password.

1. Log in to TPL-430AP.

2. Go to System and select the Change password menu.

3. In the Old Password field, enter the old password. By default, the password is admin)

4. Enter the New Password, and enter it again in the Confirm Password field to verify.

5. Click Save to save your settings.

Note: If you change the access point login password, you will need to access the access

point management page using the User Name “admin” and the new password.

Restore

System > Restore

You may want to restart or restore your powerline access point if you are encountering

difficulties with your access point and have attempted all other troubleshooting.

1. Log in to TPL-430AP.

2. Go to System and select the Restore menu.

3. Click Restore to reset the device back to factory default settings.

4. Click OK to confirm your selection.

5. Your TPL-430AP will take about 3 minutes to reset and reboot back to factory default

settings.

Administrator User Name

admin

Administrator Password

Please refer to sticker or

device label

Access Point IP Address

http://tpl-430ap /

192.168.10.1

Access Point Subnet Mask

255.255.255.0

Wireless Interface

Enabled

Wireless Network Name/Encryption

(WPA2-PSK AES)

Please refer to sticker or

device label

Powerline Encryption Key

HomePlugAV

TRENDnet User’s Guide

TPL-430AP / TPL-430APK

12

Firmware Update

System > Firmware update

TRENDnet may periodically release firmware upgrades that may add features or fix

problems associated with your TRENDnet access point model and version. To check if

there is a firmware upgrade available for your device, please check your TRENDnet model

and version using the link. http://www.trendnet.com/downloads/

In addition, it is also important to verify if the latest firmware version is newer than the

one your access point is currently running. To identify the firmware that is currently

loaded on your access point, log in to the access point, click on the Administrator section

and then on the Status. If there is a newer version available, also review the release notes

to check if there were any new features you may want or if any problems were fixed that

you may have been experiencing.

-If a firmware upgrade is available, download the firmware to your computer.

-Unzip the file to a folder on your computer.

Please note the following:

• Do not interrupt the firmware upgrade process. Do not turn off the device or

press the Reset button during the upgrade.

• If you are upgrade the firmware using a laptop computer, ensure that the laptop

is connected to a power source or ensure that the battery is fully charged.

• Disable sleep mode on your computer as this may interrupt the firmware upgrade

process.

• Do not upgrade the firmware using a wireless connection, only using a wired

network connection.

• Any interruptions during the firmware upgrade process may permanently

damage your access point.

1. Log into your TPL-430AP’s management page.

2. Click on System and click on Firmware Update

3. Depending on your web browser, under Select File, click Browse or Choose File.

4. Navigate to the folder on your computer where the unzipped firmware file (.img)

is located and select it.

5. Click Save. If prompted, click Yes or Ok.

TRENDnet User’s Guide

TPL-430AP / TPL-430APK

13

Status

System > Information

You may want to check the system information of your access point such as IP address

settings, access point mode, wireless and wired network settings, access point wireless

MAC addresses, and firmware version.

Clients

System > Clients

You may want to check to see what devices are currently connected to your TPL-430AP.

This page will show the number of clients that are connected, their IP address and the

clients’ MAC address.

1. Log into your TPL-430AP’s management page.

2. Click on System and click on Clients

La pagina si sta caricando...

Trendnet TPL-430APK Guida utente

Questo manuale è adatto anche per

Trendnet TPL-430APK Guida utente

in altre lingue

Documenti correlati

Altri documenti