Ericsson DT290 Manuale utente

?

Cover Page Graphic

Place the graphic directly on the page, do not care about

putting it in the text flow. Select Graphics > Properties

and make the following settings:

• Width: 15,4 cm (Important!)

• Height: 11,2 cm (May be smaller)

• Top: 5,3 cm (Important!)

• Left: -0,3 cm (Important!)

This text should then be hidden.

DT290

Cordless Phone for MD110 Communication System

User Guide

Welcome

DT2902

Welcome

Welcome to the User Guide for the DT290 cordless phone in the

Ericsson MD110 communication system. It is a state-of-the-art

business communications system. Its alliance of features and

facilities effectively improves communications for virtually any kind

of organisation.

There is a line of telephones designed for easy use in every

situation to take full advantage of these advanced features and

facilities.

Some markets use differing codes for some functions. In this guide,

all functions are described using the most common code. The

markets and their differing code is shown as a side note.

The User Guide describes the facilities of the DT290 phone as it is

programmed at delivery from the factory. There may be some

differences in the way your system is programmed. Please consult

your system administrator if you need further information.

The latest version of this User Guide can also be downloaded from:

http://www.ericsson.com/enterprise

ERICSSON MAKES NO WARRANTY OF ANY KIND WITH

REGARD TO THIS MATERIAL, INCLUDING, BUT NOT LIMITED

TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND

FITNESS FOR A PARTICULAR PURPOSE. Ericsson shall not be

liable for errors contained herein nor for incidental or consequential

damages in connection with the furnishing, performance or use of

this material.

Hereby, Ericsson Enterprise AB, declares that this telephone, is

in conformity with the essential requirements and other relevant

provisions of the European R&TTE directive 1999/5/EC.

Please refer to: http://www.ericsson.com/sdoc

EN/LZT 103 49 R1A

stored in retrieval systems, or transmitted in any form or by any

means, electronic, mechanical, photocopying, recording or

otherwise, without prior written permission of the publisher except

in accordance with the following terms:

When this publication is made available on Ericsson´s homepage

Ericsson gives its consent to downloading and printing copies of

the content provided in this file only for private use and not for

redistribution. No parts of this publication may be subject to

alteration, modification or commercial use. Ericsson will not be

liable for any damages arising from use of an illegal modified or

altered publication.

3DT290

Table of Contents

Important .........................................................4

Description .......................................................8

Switching On/Off ............................................14

Free Seating (optional) ....................................15

Incoming Calls ...............................................17

Outgoing Calls ...............................................19

Call List ..........................................................22

During Calls ....................................................24

When You Receive a Busy Signal ...................29

Call Forwarding ..............................................32

Internal Messages ..........................................41

Voice Mail .......................................................42

Information .....................................................45

Abbreviated Numbers ....................................47

Phone Book ...................................................50

Group Facilities ..............................................58

Authority ........................................................60

Other Useful Facilities .....................................63

Settings and Adjustments ..............................68

Audible Signals ..............................................79

Display Information .........................................81

Installation ......................................................84

Reference ......................................................91

Troubleshooting ..............................................97

Glossary .........................................................99

Index ............................................................ 100

Important

DT2904

Important

This section describes the information that is important to know

before you use the DT290 phone and the functions described.

Note: This User Guide describes the supported MD110

Communication System functions together with the most

commonly used phone-specific functions. All phone-specific

functions are listed in the menu structure, see section “Menu

structure” on page 13.

Before using the DT290 the first time you have to charge and

connect the battery, see section “Installation” on page 84.

Coverage area

Your organisation’s premises is covered by a number of cells which

forms the coverage area. You can make and answer calls anywhere

within this area; outside you will lose contact with the system.

Company coverage:

5DT290

Important

PIN code

Your phone is initially provided with a pre-set PIN code (Personal

Identification Number). You should change this PIN code to a

personal PIN code to prevent misuse.

To change the PIN code

Route: Settings » PhoneLock » ChangePIN

ChangePIN

Select.

.i Press.

EnterOldPIN

: is displayed.

Z .i Enter the current PIN code (default 0000) and press.

Either

EnterNewPIN:

or

Wrong PIN

is displayed. In the latter

case, you have entered a number that does not match the current

PIN code.

Z .i Enter the four digits of the new PIN code and press.

RepeatNewPIN

is displayed.

Z .i Enter the new PIN code again and press.

Either

New PIN accepted

or

Wrong New PIN

is displayed.

Note the new PIN code for future use.

If you incorrectly enter a new PIN code three times in a row, your

phone leaves this menu option.

In other situations, if you enter an incorrect PIN code three times in

a row, your phone is blocked and

PIN Blocked, Unblock?

is

displayed. See section “IPEI code” on page 6 to unblock your

phone.

Important

DT2906

IPEI code

If your phone is blocked because an incorrect PIN code has been

entered three times, you can unlock it with the IPEI code

(International Portable part Equipment Identity). After entering the

IPEI code, you must enter a new PIN code.

The IPEI code is a unique code which has been assigned to your

phone. The IPEI code can be found in the

ShowIPEI

menu.

If your phone is blocked,

PIN Blocked, Unblock?

appears. The

phone must be unblocked before it can be used again.

To display the IPEI code

Route: Information » ShowIPEI

.i Select

ShowIPEI

and press.

Enter PIN

: is displayed.

Z .i Enter the PIN code for your phone (default 0000) and press.

The 13-digit IPEI code is displayed.

.i Press to leave this menu.

Note: Write down the IPEI code for future use. If you cannot

retrieve the IPEI code, please contact your system

administrator. Keep the IPEI code secret to prevent misuse

of your phone.

Unblock the DT290

.i Press.

Backdoor:

is displayed.

Z .i Enter the IPEI code and press.

EnterNewPIN:

is displayed.

Z .i Enter the four digits of the new PIN code and press.

RepeatNewPIN

is displayed.

Z .i Enter the new PIN code again and press.

Either

New PIN accepted

or

Wrong New PIN

is displayed. In the

latter case, the new PIN and the code you have just entered do not

match. If

New PIN accepted

appears, you can use the phone

again.

7DT290

Important

Networks (menu option)

The menu option Networks should only be used for administration

purposes by Ericsson service staff. Using this menu option may

cause a logout from the DECT/GAP network, and no further calls

will be possible.

Note: In case of a logout, the phone must be logged on

again by a service technician.

Description

DT2908

Description

1

3

2

4

5

6

7

9

8

11

12

13

14

15

16

17

18

19

Work 132

01-Dec 11:32

20

10

9DT290

Description

1 Antenna

2Volume Up

Off-hook: raise earpiece volume. See section “Settings and Adjustments”

on page 68.

3Volume Down

Off-hook: lower earpiece volume. See section “Settings and Adjustments”

on page 68.

4 Off-hook / Yes

Answer call, accept.

5 Clear (C) / Mute

Delete latest entered digit. Backspace when editing text. Cancel a

menu option. Microphone, ringer and warning on/off, see sections

“During Calls” on page 24 and “Settings and Adjustments” on

page 68.

6 Control key (up)

Scroll up through menus or name list. Move left through the

choices.

7 1 / Space

Space when editing text. See section “Phone Book” on page 50.

8 Star / Pause / Text case

Insert a dial tone pause. Upper/lower case in text mode. See

section “Phone Book” on page 50.

9 Battery (rear side)

See section “Installation” on page 84.

10 Microphone (rear side)

11 Warning light

Ringing, message waiting, battery low, exit cover area.

12 Earpiece

Please note: The phone may retain small magnetic

articles around the earpiece region.

13 Display (3 rows)

Display at rest. Work is the network name and 132 is (your)

extension number. See section “Display signs and icons” on

page 11.

14 On/Off / On-hook / No

Switch on/off, end call, one menu back. Cancel a menu option.

Description

DT29010

15 Control key (down)

Scroll down through menus, name list. Move right in choices.

16 Keypad

17 Hands-free

Activate hands-free speaking. See sections “Incoming Calls” on

page 17, “Outgoing Calls” on page 19 and “During Calls” on

page 24.

18 R/Message

Put call on hold (inquiry), take call off hold or enter the message

system. See section “During Calls” on page 24.

19 Accessory connectors

See section “Installation” on page 84.

20 Loudspeaker (rear side)

For hands-free speaking function. See sections “Incoming Calls” on

page 17, “Outgoing Calls” on page 19 and “During Calls” on

page 24.

11DT290

Description

Display signs and icons

The display gives you visual feedback on all actions that you

perform, and also textual warnings. The upper two rows are text

rows (12 possible characters in each row), showing menus that you

can access, names and numbers that you edit or dial, your phone

ID etc. The lower row displays different statuses, visualized by

icons. For more information see section “Display Information” on

page 81.

The DT290 display

Signs in the text rows

> Menu pointer / Diversion indicator

Shows the menu that can be accessed by pressing the YES key.

When displayed before a name or number it indicates that the

phone is diverted to another extension.

< Number too long for display

There are more digits to the left.

Call List icon

Marks an entry in the Call List. Three different call types are

displayed:

<- Incoming call

-> Outgoing call

X Missed call

! Exclamation Mark

Marks an unread entry in an entry list.

Description

DT29012

Display icons

Signal strength

On when your phone is locked to the system. The bars indicate

reception quality. Four bars indicate optimal reception.

Ringer off

Ringing signal muted or microphone off.

Key lock

Keys are locked.

Call

On when your phone is off-hook and flashes during ringing.

Message

Message received.

Call info

New unanswered entry in the MissedCalls list.

Battery gauge

The battery cells flash sequentially while the battery is charging and

remain solid when charging is complete. Indicates the amount of

talk and standby time left.

Note: An alarm sounds when there is less than 15 minutes

calling time left in the battery.

Additional display features

Depending on which network you are connected to, additional

display features are available. For example, displaying the date and

time. Ask your system administrator if you require additional display

features.

13DT290

Description

Menu structure

The available phone-specific functions and network functions can

be accessed via the DT290 menus.

L or M Press to access the on-hook menu when in standby mode or

to access the off-hook menu during a call (see below).

Navigation keys

Menu Structure

AutoKeyLock

MasterReset

Language

Settings

Find&Call

*

DeleteAll

*

Options available when “on-hook”

SelectNet

Priority *

Rename

Delete

Subscribe

CallList *

MissedCalls *

LastCall *

TotalCalls

ShowIPEI

DevServices *

Store

Find&Edit *

Edit

Delete

AddNew

AddCallList

PhoneBook

Alerts

RingVolume

KeySound

DiscreetRng

RingType

Internal

External

CallBack

Message

PhoneLock

PowerOn

Subscript

ChangePIN

Display

Light

Contrast

Networks

**

Information

Find&Call

*

CallList *

GoToDTMF ***

DevServices *

Options available when “off-hook”

LM

Move within a menu.

.i Make selection.

Move to submenu.

,| Move to previous menu.

<

Move to idle display.

* Available under certain conditions (e.g. entries stored).

Alarm

SetAlarm

AlarmOff *

Vibrator

OnIfSilent

On

Off

MessageKey

Mess.KeyNo

Voice: x Mailbox

Messages x

*

***Alternative menu DTMF-Long is not applicable for MD110.

Notes:

**Only to be used by system administrator

Left/Up

Right/Down

Confirm Back

Cancel

Switching On/Off

DT29014

Switching On/Off

Switch on the DT290

,| Press until the display lights up.

If the phone does not switch on or the battery icon starts flashing,

the battery is low. Charge the battery. While charging you can still

use your phone.

Note: If the signal strength icon is off and the message

No network is displayed you cannot make or answer calls.

Switch off the DT290

Note: During calls, you cannot switch off your phone.

,| Press until the display turns blank.

Your phone is switched off.

15DT290

Free Seating (optional)

The free seating function is used for persons who have an office

extension number but no telephone set of their own. For example,

flexible office workers, persons mostly working outside the office,

etc. As a free seating user and working from the office, you log on

to any free telephone set that temporarily will be assigned with your

extension number and your system authorities.

To log on

*11* Press.

Z* Enter the authorization code and press.

Z#.i Enter your telephone number and press.

Wait for the call timer to start in the display.

,| Press to finish the procedure.

The display shows your telephone number.

Note: An earlier version of the free seating function use

another procedure: To log on, press

* 1 0 * extension No. #.

Free Seating (optional)

DT29016

To log off

#11#.i Press.

Wait for the call timer to start in the display.

,| Press to finish the procedure.

Note: An earlier version of the free seating function use

another procedure: To log off, press

# 1 0 #.

17DT290

Incoming Calls

Answer calls

A ringing signal indicates an incoming call and the warning light

flashes quickly. The ringing type tells you whether the call is an

internal, external or call-back call and the display indicates an

incoming call. You can also see who has called you in the Call List.

Display example:

If the number is stored in the Phone Book, the associated name is

shown instead.

.i Press to answer.

If you do not answer the call, the number is stored as a missed call

in the Call List. See section “Call List” on page 22.

Note: Calls can be answered at any time, no matter if you

are programming, or keying in a number etc.

Hands-free

> Press to answer the call in hands-free speaking mode.

You are connected to the caller via the loudspeaker and

microphone.

End the call

,| Press.

The duration time of the call is shown.

4736

Incoming Calls

DT29018

Mute ring sound or warning sound

If the phone rings or a warning sounds at an inconvenient moment

you can temporarily suppress the sound:

< Press to turn off the ringing for the moment.

The ring off icon appears.

Even with the sound off, you can still answer the call. The warning

light and hook icon keep flashing. If you do not answer the call, the

number is stored as a missed call in the Call List. To turn off the ring

sound permanently, see section “Volume control” on page 68.

Note: If you decide not to answer the call, press the NO

key. The call is rejected and there is no entry in the Call List.

For another extension

You can answer a call to another telephone. When the telephone

rings and there is nobody to answer the call:

Z .i Call the ringing extension and press.

Busy signal.

8 Press.

Note: France press

4; Sweden press 6

Call List

The last 20 dialled numbers, missed calls and answered calls are

stored in the Call List (if supported by the network). See section

“Call List” on page 22.

Anna

19DT290

Outgoing Calls

Make calls

How to make internal and external calls. You can also make a call

via the Phone Book, see section “Make a call” on page 51.

Notes:

Correct a wrong entry by pressing the C/MUTE key.

If you decide not to make the call while keying in the

number, press the NO key to stop.

If you receive a call while keying in the number, simply press

the YES key to answer.

You can make your calls faster by using abbreviated

numbers. See section “Abbreviated Numbers” on page 47.

Internal calls

Z .i Dial the extension number and press.

Your phone will go off-hook and dial the number. On the display the

duration of the call is shown.

External calls

0 Dial the digit or digits to get an external line.

Z .i Dial the external number and press.

Your phone will go off-hook and dial the number. On the display the

duration of the call is shown.

Outgoing Calls

DT29020

To insert a pause if you have to wait for dial tone:

* Press.

Off-hook dialling

If you prefer to dial a number off-hook:

.i Press and hold and wait for the dial tone.

Note: A short press activates the Call List.

Z Dial the number and wait for a connection.

Hands-free

While you are waiting for a connection, dial tone or during the call:

> Press to switch the call to hands-free speaking mode.

You are connected to the caller via the loudspeaker and

microphone.

To end calls

,| Press to end the call.

The duration of the call is displayed.

Call List

The last 20 dialled numbers, missed calls and answered calls are

stored in the Call List (if supported by the network). See section

“Call List” on page 22.

0:00:23

00535554505

La pagina si sta caricando...

Ericsson DT290 Manuale utente

Ericsson DT290 Manuale utente

in altre lingue

Documenti correlati

Altri documenti