Aastra DT292 Manuale utente

Cover Page Graphic

Place the graphic directly on the page, do not care about

putting it in the text flow. Select Graphics > Properties

and make the following settings:

• Width: 15,4 cm (Important!)

• Height: 11,2 cm (May be smaller)

• Top: 5,3 cm (Important!)

• Left: -0,3 cm (Important!)

This text should then be hidden.

DT292

Cordless Telephone for Aastra MX-ONE™ and Aastra MD110

User Guide

EN/LZT 103 70 R6A

3DT292

Table of Contents

Welcome ..........................................................4

Important User Information ............................... 6

Description ..................................................... 13

Switching On/Off ............................................22

Free Seating ...................................................23

Incoming Calls ...............................................24

Outgoing Calls ...............................................29

Phone Book ...................................................41

Call List ..........................................................49

During Calls ....................................................51

Call Forwarding ..............................................57

Absence Information ......................................66

Messages ......................................................68

Group Features .............................................. 72

Other Useful Features .....................................74

Settings ..........................................................79

Installation ......................................................90

Troubleshooting ..............................................98

Glossary .......................................................100

Index ............................................................101

Welcome

DT2924

Welcome

Welcome to the user guide for the Aastra DT292 cordless phone.

This guide describes the available features of the telephone when it

is connected to Aastra MD110 or Aastra MX-ONE™.

The functions and features available with these telephones are

designed for easy use in all different telephone handling situations.

Depending on the version and configuration of the exchange that

your telephone is connected to, some of the functions and features

that are described in this user guide may not be available. There

may also be some differences in the way your telephone is

programmed. Please consult your system administrator if you need

further information.

Some markets use differing codes for some features. In this guide

they are described using the most common code.

The latest version of the user guide can be downloaded from:

http://www.aastra.com

5DT292

Welcome

Copyright

stored in retrieval systems, or transmitted in any form or by any

means, electronic, mechanical, photocopying, recording or

otherwise, without prior written permission of the publisher except

in accordance with the following terms.

If this publication is made available on Aastra´s homepage, Aastra

gives its consent to downloading and printing copies of the content

provided in this file only for private use and not for redistribution. No

parts of this publication may be subject to alteration, modification

or commercial use. Aastra will not be liable for any damages arising

from use of an illegal modified or altered publication.

Warranty

AASTRA MAKES NO WARRANTY OF ANY KIND WITH REGARD

TO THIS MATERIAL, INCLUDING, BUT NOT LIMITED TO, THE

IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS

FOR A PARTICULAR PURPOSE. Aastra shall not be liable for

errors contained herein nor for incidental or consequential

damages in connection with the furnishing, performance or use of

this material.

Declaration of Conformity

Hereby, Aastra Telecom Sweden AB, Box 42214,

SE-126 17 Stockholm, declares that this telephone is in

conformity with the essential requirements and other relevant

provisions of the R&TTE directive 1999/5/EC.

Details to be found at: http://www.aastra.com/sdoc

Important User Information

DT2926

Important User Information

Safety instructions

Save these instructions.

Read these safety instructions before use!

Recommendations

• Always keep and handle your products with care

and keep them in a clean and dust-free place.

Proper use and care will prolong the products life.

Use a soft absorbent tissue or cloth to remove

dust, dirt or moisture.

• Always ensure that the phone, battery and

charger are used and operated in the

environment for which they are designed.

• Operate the phone in temperatures between 0°C

to +40°C (32°F to 104°F).

• Do not expose your products to liquid,

moisture, humidity, solvents, strong

sunlight, harsh environments or

extreme temperatures, never above

+60°C (+140°F), unless the product

has been specifically designed and

officially approved for such environments.

• Exposure to heat may cause batteries

to leak, overheat or explode, resulting

in fire, burns or other injuries.

• Do not put the product in the

microwave oven: This may cause

damage to either the oven or the product.

• Do not attempt to disassemble or alter

any part of the phone, the charger(s)

or the battery-pack. Disassembly or

alteration may result in electrical

shock or irreversible damage to the

equipment.

Only a qualified service

personnel or an authorized Aastra partner should

conduct internal inspections, alterations and

repairs.

• Do not expose your product to open flames or lit

tobacco products.

• Do not drop, throw or bend your products. This

may cause malfunction or electric shock.

• Do not paint your product.

• Do not use your product in an area where a

potentially explosive atmosphere exists, unless

the product has been specifically designed and

officially approved for such environments.

• To avoid hearing impairment, accept the call

before holding your product (or portable

handsfree device) to your ear.

Disposal of the product

• Your product should not be placed in

municipal waste. Please check local

regulations for disposal of electronic

products.

7DT292

Important User Information

Power supply

• Connect the AC power adapter of the charging

unit only to the designated power sources as

marked on the charger.

• Make sure the cord is positioned so that it will not

be subjected to damage or stress.

• To reduce risk of electrical shock, unplug the

chargers from any power source before

attempting to clean or move it.

• The AC power adapters must not be used

outdoors or in damp areas.

• Never modify the cord or plug. If the plug will not

fit into the outlet, have a proper outlet installed by

a qualified electrician.

• Limit the distance between the mains socket and

the cordless phone when charging for easy

accessibility.

• As an energy saving measure, disconnect the

charger from the main socket after charging.

• When unplugging the mains adapter from the

power outlet, make sure that your hands are dry

and ensure that you hold the solid portion of the

mains adapter.

• Do not pull on cables.

Charging and batteries

Please read carefully the following

important precautions before the

first time use of the batteries. Make

sure to understand and observe all

cautionary instructions stated, so as

to avoid any possible safety hazards

that are caused by any misuse, misapplication

or damage to batteries.

•Only use batteries, mains adapters or desk and

rack chargers which have been specifically

designed for use with your product.

• Use of power sources not explicitly

recommended may lead to overheating, reduced

battery performance, distortion of the equipment

and fire or other damages.

• Cordless phones are equipped with Nickel Metal

Hydride (NiMH) batteries or Lithium Ion Lion

batteries. In a complex infrastructure, the talk-

and standby time may differ, due to the

consequence of the increase in signaling.

• The battery must always be completely charged

(minimal 4 hours) before first time use.

• The battery in your product is designed to

withstand many charge cycles.

• Use only the recommended charging equipment.

• Improper charging can cause heat damage or

even high pressure rupture.

• Observe proper charging polarity.

• Do not solder lead wires directly onto the battery.

• Do not allow water to come into contact with the

battery.

• The initial charging of a NiMH battery will cause

the battery to become warm. This is a normal

effect of charging NiMH batteries.

• The batteries are replaceable, however it is not the

intention to do this frequently.

• Only charge the batteries when placed in the

phone.

• Use only the specified battery-packs for your

product.

• Never heat or dispose of the battery into a fire,

which, or else, may cause leakage, burst or fire.

• Remove the carrying case from the product while

in charger.

• Do not cover the product while being charged. Do

not charge the phone in a closed cabinet or

drawer. The charging of the battery is a chemical

process and causes the battery to become warm

during charging. Make sure the environment in

which the phone is charged, is well vented.

• The cordless phone can be charged either when

switched on or off.

• Do not connect the battery's positive and

negative leads altogether in any circumstances.

• Do not strike or drop the battery. It may cause

damage to the battery.

• Do not charge the battery below +5°C

(+41°F). Be sure to charge the battery

between +5°C and +45°C (+41°F and

113°F). Charging beyond these

conditions may impair the battery

performance and shorten the life

cycle.

• Do not use battery packs from different types,

brands or of different capacities.

• The battery is to be stored in a dry cool place, with

the ambient temperature of approx. +25°C

(+77°F) for best performance.

• The battery continues to discharge a minimal

portion of its power, even if the product is

switched off or the battery is removed.

• Dispose the battery in accordance with all local

regulations, applicable in your country.

Important User Information

DT2928

Warnings

Smoke or fumes

• Stop operating the products and turn

off immediately in case of smoke or

fumes. Unplug the mains adapter

and remove the batteries from the phone

immediately. Continued operation may result in

fire or electrical shock.

LCD

• If the liquid crystal display breaks, avoid injury by

not allowing the liquid crystal to come into contact

with eyes, skin or mouth. Prevent the liquid crystal

from leaking out of the broken glass.

Preventing malfunction

• Never place the equipment in close proximity of

electric motors, welding equipment or other

devices generating strong (electro) magnetic

fields. Exposure to strong (electro) magnetic fields

may cause malfunction and corrupt the

communication.

• Moving the equipment rapidly between warm and

cold temperatures may cause condensation

(water droplets) to form on its internal and external

surfaces. Water droplets may cause malfunction

of the equipment and corrupt or end

communication or damage the equipment. When

condensation is noticed, stop using the

equipment. Switch off the phone, remove the

battery and unplug the mains adapter from the

power outlet. Wait until the moisture evaporates

from the equipment before putting it in operation

again.

• Avoid accidental drop of the phone. Use the clip,

security clip or carrying case specified for carrying

purposes of the phone.

• Avoid squeezing the phone between furniture and

your body when carrying the phone in your

pocket or attached to clothing.

9DT292

Important User Information

Intrinsic safety

The DT292 phone is not specified as intrinsically safe, so do not

use it in areas with a danger of explosion.

Preparing for use

Before using the DT292 the first time you have to charge and

connect the battery, see section “Preparing for use” on page 91.

Note: Place the DT292 in the charger and charge it for at

least 4 hours before using it the first time.

Important User Information

DT29210

PIN code

Your phone is initially provided with a pre-set PIN code (Personal

Identification Number). You should change this PIN code to a

personal PIN code to prevent misuse.

To change the PIN code

Route: Settings » PhoneLock » ChangePIN

ChangePIN Select.

ÜÛ Press.

EnterOldPIN: is displayed.

Z ÜÛ Enter the current PIN code (default 0000) and press.

Either EnterNewPIN: or Wrong PIN is displayed. In the latter case,

you have entered a number that does not match the current PIN

code.

Z ÜÛ Enter the four digits of the new PIN code and press.

RepeatNewPIN is displayed.

Z ÜÛ Enter the new PIN code again and press.

Either New PIN accepted or Wrong New PIN is displayed.

Note the new PIN code for future use.

If you incorrectly enter a new PIN code three times in a row, your

phone leaves this menu option.

In other situations, if you enter an incorrect PIN code three times in

a row, your phone is blocked and PIN Blocked, Unblock? is

displayed. See section “IPEI code” on page 11 to unblock your

phone.

11DT292

Important User Information

IPEI code

If your phone is blocked because an incorrect PIN code has been

entered three times, you can unlock it with the IPEI code

(International Portable part Equipment Identity). After entering the

IPEI code, you must enter a new PIN code.

The IPEI code is a unique code which has been assigned to your

phone. The IPEI code can be found in the ShowIPEI menu.

If your phone is blocked, PIN Blocked, Unblock? appears. The

phone must be unblocked before it can be used again.

To display the IPEI code

Route: Information » ShowIPEI

ÜÛ Select ShowIPEI and press.

Enter PIN: is displayed.

Z ÜÛ Enter the PIN code for your phone (default 0000) and press.

The 13-digit IPEI code is displayed.

ÜÛ Press to leave this menu.

Note: Write down the IPEI code for future use. If you cannot

retrieve the IPEI code, please contact your system

administrator. Keep the IPEI code secret to prevent misuse

of your phone.

Unblock the DT292

ÜÛ Press.

Backdoor: is displayed.

Z ÜÛ Enter the IPEI code and press.

EnterNewPIN: is displayed.

Z ÜÛ Enter the four digits of the new PIN code and press.

RepeatNewPIN is displayed.

Z ÜÛ Enter the new PIN code again and press.

Either New PIN accepted or Wrong New PIN is displayed. In the

latter case, the new PIN and the code you have just entered do not

match. If New PIN accepted appears, you can use the phone

again.

Important User Information

DT29212

Accessibility and voice quality

The base network is not always available. If you do not get in

contact with your system, contact your system administrator. For

best voice quality, avoid positioning near computer, radio or similar

euqipment.

Operating area

You can use your cordless telephone in the area that is covered by

the network. Outside this area you will lose contact with the

telephone network. The signal strength icon will disappear and No

network will be displayed.

Out of coverage

When you leave the system's coverage area there will be a short

beep and a lamp indication.

When re-entering the coverage area it can take a couple of minutes

before the phone automatically has registered into the system.

Networks (menu option)

The menu option Networks should only be used for administration

purposes by service staff. Using this menu option may cause a

logout from the DECT/GAP network, and no further calls will be

possible.

Note: In case of a logout, the phone must be logged on

again by a service technician.

13DT292

Description

2

1

3

4

5

6

8

7

9

10

11

12

13

14

15

16

17

18

Work 4711

07-Jul 11:32

19

Description

DT29214

1Volume Up

Off-hook: raise earpiece volume. See section “Settings” on page 79.

2Volume Down

Off-hook: lower earpiece volume. See section “Settings” on page 79.

3Off-hook / Yes

Answer call, accept.

4 Clear (C) / Mute

Delete latest entered digit. Backspace when editing text. Cancel a

menu option. Microphone, ringer and warning on/off, see sections

“During Calls” on page 51 and “Settings” on page 79.

5 Control key (up)

Scroll up through menus or name list. Move left through the

choices.

61 / Space

Space when editing text. See section “Phone Book” on page 41.

7 Battery (rear side)

See section “Installation” on page 90.

8 Star / Pause / Text case

Insert a dial tone pause. Upper/lower case in text mode. See

section “Phone Book” on page 41.

9Microphone

10 Warning light

Ringing, message waiting, battery low, exit cover area.

11 Earpiece

Please note: The phone may retain small magnetic

articles around the earpiece region.

12 Display (3 rows)

Display at rest. Work is the network name and 132 is (your)

extension number. See section “Display information” on page 17.

13 On/Off / On-hook / No

Switch on/off, end call, one menu back. Cancel a menu option.

14 Control key (down)

Scroll down through menus, name list. Move right in choices.

15DT292

Description

15 Keypad

16 Handsfree

Activate handsfree speaking. See sections “Incoming Calls” on

page 24, “Outgoing Calls” on page 29 and “During Calls” on

page 51.

17 R/Message

Put call on hold (inquiry), take call off hold or enter the message

system. See section “During Calls” on page 51.

18 Accessory connectors

See section “Installation” on page 90.

19 Loudspeaker (rear side)

For handsfree speaking function. See sections “Incoming Calls” on

page 24, “Outgoing Calls” on page 29 and “During Calls” on

page 51.

Phone signals

The cordless phone is signalling certain events audibly and visually

as described below.

The cordless phone also generates audible ring signals, alarm

signals and warning tones, and key clicks.

Signal Meaning

Red warning light Incoming call

Message waiting

Battery almost empty

Cordless phone out of range or not connected

Sound Meaning

Ring signal Incoming call

Alarm signal 4 short beeps every 30 seconds: battery almost

empty

4 short beeps every 2 minutes: Cordless phone

out of range or not connected

Key click You hear this each time you press a key (when

selected). See section “Key Sound” on page 85.

Warning tone You have pressed a key which has no function.

Description

DT29216

Tone s

The following different tones are sent from the exchange to your

phone.

Tone characteristics

The tones shown in this section are the most used tones

worldwide. Many markets use a differing tone for one or more

situations.

Dial tone

Special dial tone

Ringing tone or queue tone

Busy tone

Congestion tone

Number unobtainable tone

Call waiting tone

Intrusion tone

Conference tone every 15 seconds (to all parties)

Verification tone

Warning tone, expensive route

17DT292

Description

Display information

The display gives you visual feedback on all actions that you

perform, and also textual warnings.

The upper two rows are text rows (12 possible characters in each

row), showing menus that you can access, names and numbers

that you edit or dial, your phone ID etc. The lower row displays

different statuses, visualized by icons.

Note: The information displayed varies depending on the

version and configuration of the exchange, and whether

you use a DECT or an IP DECT phone. Consult your system

administrator to find out which type of phone you have.

The DT292 display:

The following display examples show the different states of your

phone.

Idle phone

Depending on the state and setting of your phone, different

information can be shown.

Normal:

Work is the programmed name of your network and can be

renamed to something more suitable, i.e. your first name, company

name, etc. To rename your network, contact your system

administrator. To the right of the display is your own extension

number.

Follow-me activated:

Work 4328

16-Mar 10:22

4328 >

4444

Description

DT29218

The display shows your own extension number 4328 diverted to

extension number 4444.

Outgoing call

Normal outgoing call:

When you make an outgoing call, both the connection state and

the dialed number or name are displayed:

When the call is answered:

Diverted call:

If the dialed number is diverted, the diversion information is shown.

For example, the display shows the dialed number 3333 (Smith)

diverted to 4444 (Brown):

When the diverted call is answered, only the number of the

answering position is displayed:

Calling

3333

Calling

SMITH

3333

4444

> 3333

BROWN

> SMITH

4444

19DT292

Description

Incoming call

Normal incoming call:

If available, the number or the name of the caller is displayed. The

examples show an incoming call:

When you have answered the call, the caller's number is moved to

the right of the display.

Diverted call:

A diversion indicator in front of the number or the name tells you

that the call is diverted to your phone. For example, the display

shows that number 3333 (Smith) was dialed, but the call was

diverted to you:

When you have answered the call, the display shows only the

caller's number.

Signs in the text rows

> Menu pointer / Diversion indicator

Shows the menu that can be accessed by pressing the YES key.

When displayed before a name or number it indicates that the

phone is diverted to another extension.

< Number too long for display

There are more digits to the left.

Call list icon

Marks an entry in the Call list. Three different call types are

displayed:

<-

Incoming call

->

Outgoing call

X

Missed call

! Exclamation Mark

Marks an unread entry in an entry list.

3333

SMITH

>3333

>SMITH

Description

DT29220

Display icons

Signal strength

On when your phone is locked to the system. The bars indicate

reception quality. Four bars indicate optimal reception.

Ringer off

Ring signal muted or microphone off.

Key lock

Keys are locked.

Call

On when your phone is off-hook and flashes during ringing.

Message

Message received.

Call info

New unanswered entry in the MissedCalls list.

Battery gauge

The battery cells flash sequentially while the battery is charging and

remain solid when charging is complete. Indicates the amount of

talk and standby time left.

Note: An alarm sounds when there is less than 15 minutes

calling time left in the battery.

Additional display features

Depending on which network you are connected to, additional

display features are available. For example, displaying the date and

time. Ask your system administrator if you require additional display

features.

La pagina sta caricando ...

Aastra DT292 Manuale utente

Aastra DT292 Manuale utente

in altre lingue

Documenti correlati

Altri documenti