BT Aura 1500 Manuale utente

User Guide

BT Aura 1500

Home Phone With Answering Machine

If you need some help, call us on 0800 218 2182* or go to www.bt.com/producthelp

Important – please read ﬁrst2

• Only use the line cord, power supply and rechargeable batteries supplied with

your phone.

• Make sure that the power supply is connected to a known working socket.

• Connect your phone to the power supply and allow the batteries to charge for

24 hours before connecting the line cord to your telephone socket.

• To make sure you get the best range and reception from your handset, avoid

interference by placing the base unit away from large metal objects such as

fridge freezers and microwave ovens or electronic products such as computers

and TVs.

Answering machine – handy hint

Make sure that the telephone is set to Answer and record and that the Ring delay

is set to answer before any voicemail service i.e. BT Answer 1571, or similar.

The default setting is ﬁve rings. If you want to change this, please see page 54.

If you need some help, call us on 0800 218 2182* or go to www.bt.com/producthelp

3

If you need some help, call us on 0800 218 2182* or go to www.bt.com/producthelp

Check box contents

Handset Base

Telephone line cord

(pre-installed)

Handset Charger

Mains power adaptor

(item code 048610)

2x AAA Ni-MH 750mAh

rechargeable batteries

(already in handset)

Mains power adaptor

(item code 048611)

2x AAA Ni-MH 750mAh

rechargeable batteries

(already in handset)

IMPORTANT

Only use the mains power adaptors, cables and rechargeable batteries supplied in this box or this

product might not work. Any replacement rechargeable batteries must be of the same type. BT accepts

no responsibility for damage caused to your BT Aura 1500 if you use any other type of batteries.

Contents for each additional handset (multipacks only)

If you need some help, call us on 0800 218 2182* or go to www.bt.com/producthelp

Where to put your phone

• Place the base within 3

metres of a mains power

socket and 2 metres of a

phone socket so the cables

will reach.

• Make sure it’s at least a

metre away from other

electrical appliances to avoid

interference.

• Don’t place the phone or

base in a bathroom or other

humid area.

• The product works by

sending radio signals

between the handset and

base. The strength of the

signal depends on where you

position the base. Putting it

as high as possible can help

give you the best signal.

IMPORTANT

• Don’t connect the phone line

to a phone socket until the

handset is fully charged.

• The base station should

be plugged into the mains

power socket all the time.

Quick set-up guide4

1 Plug in

The telephone line cord is pre-installed but don’t

plug the other end into the wall socket yet.

1

2

1. Plug the mains power

adaptor with the blue

ring on the connector

into the base, with the

cable clipped in the

groove provided.

2. Plug the other end

of the power adaptor

into the wall power

socket and switch on.

Quick set-up guide 5

If you need some help, call us on 0800 218 2182* or go to www.bt.com/producthelp

Talk/Standby time

Under ideal conditions, the

handset batteries should give

up to 15 hours talk time or

150 hours standby on a single

charge. (This doesn’t mean you

can unplug the base or leave

the handset for this length of

time without charge).

Please note that new NiMH

rechargeable batteries don’t

reach full capacity until

they’ve been in normal use

for several days.

Battery low warning

If the

icon is ﬂashing in the

display and you hear a warning

tone every minute during a call,

you’ll need to recharge your

handset before you can use it.

Quick set-up guide 5

2 Charge

1. Activate the batteries by pulling the plastic tab

away from the back of the handset.

Rechargeable batteries

already fitted

Remove this tab

and charge batteries

for 24 hours before use.

2. Place the handset on the base to charge.

3. After 24 hours, plug the phone line cord into the

phone wall socket.

IMPORTANT

Charge the handset batteries for 24 hours or your

phone might not work.

If you need some help, call us on 0800 218 2182* or go to www.bt.com/producthelp

Quick set-up guide6

Battery performance

• To keep the batteries in the

best condition, leave the

handset off the base for a

few hours at a time.

• Running the batteries right

down at least once a week

will help them last as long

as possible.

• After charging your handset

for the ﬁrst time, subsequent

charging time for the

batteries is approximately

6–8 hours.

• The charge capacity of

rechargeable batteries will

go down over time, which

will reduce the talk and

standby time. Eventually

they’ll need replacing.

For details on how to get

replacement batteries, call

the help team on 0800

218 2182*.

1

Set up your additional handsets (multipacks only)

1. For additional handsets and chargers: plug the

mains power adaptor connector into the back of the

charger and plug the other end into the mains wall

socket and switch on the power.

2. Activate the batteries as explained on page 5.

3. Place the handset on the charger to charge for

24 hours.

If you ever need to remove the batteries, simply

slide open the battery compartment cover and

ease out the batteries.

Quick set-up guide 7

If you need some help, call us on 0800 218 2182* or go to www.bt.com/producthelp

3 Go!

Your BT Aura 1500 is now ready

for you to use

• For help setting the date and time, go to page 35.

• For instructions on making a call, go to page 18.

• For help personalising your phone’s settings, go to

page 35.

• For instructions on using the answering machine,

go to page 51.

Or, you may ﬁnd the answer in the Help section

on page 64 or see our online frequently asked

questions at www.bt.com/producthelp

Alternatively, call the Helpline on 0800 218 2182*.

* Calls made from within the UK mainland network are free. Mobile and

international call costs may vary.

Quick set-up guide 7

Using your BT Aura 1500

on a broadband line?

If so, you need to ﬁt an ADSL

microﬁlter between the

phone line cord and the

phone socket. You can get

BT ADSL microﬁlters from

www.bt.com/shop

If you need some help, call us on 0800 218 2182* or go to www.bt.com/producthelp

8 In this guide

Getting to know your phone

Handset buttons ..............................12

Handset display / display icons .........14

Base ................................................15

Finding your way around your phone 16

Menu map .......................................17

Using the phone

Switching the handset on or off ........18

Making an external call ....................18

Preparatory dialling .........................18

Ending a call ....................................18

Receiving a call ................................18

Call Waiting .....................................19

Earpiece volume ..............................19

Mute ...............................................20

Handsfree .......................................20

Making a handsfree call....................20

Answering a call handsfree ...............20

Switch to handsfree during a call ......21

Redial list ........................................21

Redial a number ..............................21

Store a number from the redial list

to your contacts ...............................22

Delete a number from the redial list ..22

Delete the entire redial list ................22

Voicemail (BT 1571) .........................23

Keypad lock .....................................23

Handset ringer on/off ......................24

Finding a handset (paging) ...............24

Contacts

Store a name and number ................25

View an entry ..................................26

View contacts capacity .....................26

Dial an entry ....................................26

Edit an entry ....................................27

Delete an entry ................................27

Delete all entries ..............................28

Edit a call group name ......................28

Change a call group ringtone ............28

Set an emoticon...............................29

If you need some help, call us on 0800 218 2182* or go to www.bt.com/producthelp

In this guide 9

Speed dial .......................................29

Copy a contact entry to a speed

dial button ......................................29

Delete a speed dial entry ..................30

Edit a speed dial entry ......................31

Dial a speed dial entry ......................31

Sound

Handset ringer melody for

external calls ...................................32

Handset ringer melody for

internal calls ....................................32

Setting the ringer volume .................33

Setting quiet mode ..........................33

Handset tones on/off .......................34

Base ringer melody ..........................34

Settings

Handset settings ..............................35

Set the date and time format ............35

Set the date and time .......................35

Brightness level ...............................36

Colour scheme .................................36

Main menu display format ................36

Handset name .................................37

Wallpaper ........................................37

Screensaver .....................................37

LCD backlight ..................................38

Select base ......................................38

Auto answer ....................................38

Reset handset ..................................39

Handset ring priority ........................39

Change system PIN ..........................40

PBX access code ..............................40

Setting the PBX access code .............40

Reset base .......................................41

Alarm clock

Setting an alarm ..............................42

Stopping the alarm when it rings ......43

Calls lists

Caller Display ...................................44

Calls list ...........................................44

Viewing call details ..........................44

In this guide

If you need some help, call us on 0800 218 2182* or go to www.bt.com/producthelp

10

Dial from the Calls list .......................45

Copy a Calls list number to

your contacts...................................45

Delete an entry in the Calls list ..........45

Delete entire Calls list .......................46

Calls list type ...................................46

New call alert ..................................46

BT Network services

Pre-stored BT Services numbers .......47

Calling the BT Aura 1500 helpdesk ....47

Calling BT 118 500

(Directory Enquires) .........................47

Using Call divert ...............................48

Using Call Waiting ............................48

Using Anonymous call reject .............49

Using Ring back ...............................49

Using Reminder call .........................49

View/edit a BT services number ........50

Enter a new service number ..............50

Answering machine

Using the answering machine from

the handset .....................................51

Switching the answering machine

on or off ..........................................51

Outgoing messages..........................52

Recording your own

outgoing message ...........................52

Checking or deleting your

outgoing message ...........................52

Select male or female outgoing

message voice .................................53

Recording a memo ...........................53

Answer settings ...............................54

Answer mode ..................................54

Answer delay ...................................54

Setting the recording time

for messages ...................................55

Call screening ..................................55

New message alert on/off ................56

If you need some help, call us on 0800 218 2182* or go to www.bt.com/producthelp

In this guide 11

Message playback using the handset 57

Delete all old messages ....................58

Using the answering machine at

the base ..........................................58

Switching on or off ..........................58

Playing back messages .....................58

Operating the answer machine with

Remote access .................................59

Turning remote access on or off ........59

Operating your answering

machine remotely ............................60

Using additional handsets

Registering an additional handset .....61

De-register a handset ......................62

Making internal calls

between handsets ............................62

Transferring a call .............................63

3-Way conference call ......................63

Help ...............................................64

General information

Safety information ...........................68

Cleaning ..........................................69

Environmental .................................69

Product disposal instructions ............69

Guarantee .......................................70

Technical information .......................71

Connecting to a switchboard ............71

Recall (R) .........................................71

R&TTE .............................................71

Declaration of Conformance .............71

For your records ...............................71

If you need some help, call us on 0800 218 2182* or go to www.bt.com/producthelp

12 Getting to know your phone

Handset buttons

(Up) Redial

In standby, press to open and scroll through the Redial list, see page 21.

In talk mode, press to increase the earpiece volume.

In menu mode, press to scroll up through the options.

Left option button

Press to open the option displayed on the screen.

In answering machine mode, deletes the current message.

OK

Press to accept current selection.

Talk

In standby mode, press to make and receive calls, see page 18

or press twice to activate handsfree mode.

In talk mode, press to switch handsfree on and off, see page 21.

Left

When entering text, press to move the cursor left.

Press to scroll left on the main menu screen.

1

In standby, press and hold to dial BT 1571 or your network’s, voicemail service.

*

Press and hold to turn the ringer on or off.

R (Recall)

For use with some BT Calling Features and when connected to a switchboard/PBX.

If you need some help, call us on 0800 218 2182* or go to www.bt.com/producthelp

Getting to know your phone 13

Right option button

In standby, press to enter the

Contacts

menu.

In sub-menus, press to open the option displayed on the screen.

In answering machine mode, stops message playback.

End call / on or off

Press to end a call.

In standby, press and hold to switch the handset on or off, see page 18.

When off the base (or charger), press once to dim the LCD backlight,

press again to turn off, press again to turn on.

In menu mode, press to return to standby.

Right

When entering text, press to move the cursor right.

Press to scroll right on the main menu screen.

(Down) Calls

In standby, press to open and scroll through the Calls list, see page 44.

In talk mode, press to decrease the earpiece volume.

In menu mode, press to scroll down through the options.

#

Press and hold to lock or unlock the keypad.

Intercom

Use to make internal calls, see page 62.

Getting to know your phone

If you need some help, call us on 0800 218 2182* or go to www.bt.com/producthelp

14

Handset display

Shows handset battery status. More bars

means more charge.

Scrolls when the handset is charging.

Empty frame ﬂashes when it needs recharging.

Shows signal strength. More bars mean

better signal.

Flashing – to warn you are moving out of range.

Off – out of range or cannot connect to the

base selected.

On – during a call.

Flashing – incoming call.

On – missed call in the Calls list.*

On – handsfree speaker on.

On – voicemail (BT 1571) message received.

On – answering machine on.

Off – answering machine off.

Memory full

shows if memory is full

Mute on

On – alarm is set.

Flash – alarm time has been reached.

Off – alarm off.

The keypad is locked.

Handset ringer is switched off.

Handset display icons

Time Date

Handset name and number

* You need Caller Display for this to work and you must subscribe to your network provider. A fee may be payable.

Find out more at www.bt.com/callingfeatures

Number of answering

machine messages received

Number of missed

calls received

If you need some help, call us on 0800 218 2182* or go to www.bt.com/producthelp

Getting to know your phone 15

Base

Answer On/Off

Press to turn the

answering machine

on or off.

Find

Press to ring all

registered handsets,

helpful for ﬁnding

a missing handset,

see page 24.

Also used during the

registration process,

see page 61.

Delete

Press once to delete

the message

during playback.

In idle mode press and

hold to delete

all old messages.

Skip<<

Press once to repeat

playing the current

message from the

beginning. Press

twice to skip

backward to play the

previous message.

Vol-

Decrease speaker

volume during

message playback.

Decrease base

ringer volume.

Vol+

Increase speaker

volume during

message playback.

Increase base

ringer volume.

Stop

Press to stop the

message during

playback.

Skip>>

Press to skip a message

during playback.

Play

Press once to play new

message.

Getting to know your phone

If you need some help, call us on 0800 218 2182* or go to www.bt.com/producthelp

16

Finding your way around your phone

Your BT Aura 1500 has an easy to use menu system.

Each menu has a list of options, which you can see on the menu map opposite.

When the handset is switched on and in standby:

1. Press the

Menu

option button to open the main menu.

2. Use

,

or buttons to scroll through and highlight the

available options.

3. When the menu you want is highlighted, press the

OK

option button to select

or the

Back

button to return to the previous screen.

To exit a menu and return to standby, press

.

If no buttons are pressed for 30 seconds, the handset returns to

standby automatically.

Left option button

Press to select the option

displayed on the screen

above the button.

Right option button

Press to select the option

displayed on the screen

above the button.

Navigation buttons

or

Scroll left and right.

Scroll up and down.

If you need some help, call us on 0800 218 2182* or go to www.bt.com/producthelp

Getting to know your phone 17

Contacts

If empty: New Entry

Capacity

If entries: <New Entry>

Entries listed

alphabetically

Settings

Date & Time

Display

Handset

Base

Alarm clock

Alarm 1

Alarm 2

Alarm 3

Alarm 4

Alarm 5

Sound

Handset Ringer

Base Ringer

Advisory Tones

Answer machine

Play Messages

Delete Old Msgs

Answer On/Off

OGM Voice

Outgoing Message

Record Memo

Answer Settings

BT Services

Helpdesk

BT118500

Diverts

Call Waiting

Anon Call Rej

Ringback

Reminder Call

<Empty>

Menu Map

If you need some help, call us on 0800 218 2182* or go to www.bt.com/producthelp

18

When you make a call, the light

on the base ﬂashes.

Call timer

Your handset will automatically

time your outgoing calls. The

handset shows the length of

time both during and for a few

seconds after your call.

Out of range warning

When the handset is out

of range of the base, the

icon ﬂashes.

If you move out of range when

you’re on a call, you’ll lose your

connection. The handset will

automatically re-connect to

the base when you move back

within range.

Switching the handset on or off

To switch off

1. Press and hold

. You will be prompted to switch

off handset. Press

Yes

to switch the handset off.

To switch on

1. Press and hold

.

Making an external call

1. Press

.

is displayed.

2. When you hear the dial tone, dial the number.

Preparatory dialling

1. Dial the number ﬁrst. If you make a mistake press

Clear

to delete the last digit.

2. Press

to dial.

Ending a call

1. Press

.

Receiving a call

When you receive a call, the phone rings. If you’ve

got a Caller Display service, the display shows the

caller’s number if it’s available or the caller’s name

if it matches an entry in your contacts list.

Using the phone

If you need some help, call us on 0800 218 2182* or go to www.bt.com/producthelp

Using the phone 19

Auto answer

If auto answer’s set to ON you

can answer a call by lifting the

handset off the base.

If auto answer’s set to OFF,

you’ll need to lift the handset

off the base and press

too.

Auto answer ON is the default

setting. See page 38.

To switch your call waiting

service on or off, see page 48.

If you don’t have a Caller Display service, the screen

shows

External

call

.

1. Press

to accept the call.

Call Waiting

If you’ve got a Call Waiting service and it is switched

on, your BT Aura 1500 will alert you to a second

incoming call if you’re already engaged on an

external call.

1. You’ll hear the call waiting tone and the display

will show the number of the caller, or the name if it

matches an entry in your contacts.

2. Press

to answer the new call and your ﬁrst caller

is put on hold.

3. Press

to toggle between the two callers.

4. Press

to hang up the current call.

Earpiece volume

During a call, you can adjust the handset earpiece

volume. There are ﬁve levels.

1. Press

or to increase or decrease the

volume.

Using the phone

If you need some help, call us on 0800 218 2182* or go to www.bt.com/producthelp

20

During a handsfree call,

press or to change

the loudspeaker volume.

Mute

During a call, you can talk to someone nearby

without your caller hearing.

1. During a call, press

Mute

. The display shows

Mute

On

and your caller can’t hear you.

2. Press

Mute

Off

to return to your caller.

Handsfree

Handsfree lets you talk to your caller without

holding the handset and means that other people

in the room can listen to your conversation over the

loudspeaker.

Making a handsfree call

1. Dial the number then press

twice. is displayed.

You hear your call over the handset loudspeaker.

Press

to switch the call between the earpiece and

the loudspeaker.

2. Press

to end the call.

Answering a call handsfree

When the phone rings:

1. Press

. The call is transferred to the handset

loudspeaker.

La pagina sta caricando ...

BT Aura 1500 Manuale utente

BT Aura 1500 Manuale utente

in altre lingue

Documenti correlati

Altri documenti