Edgewater Networks EdgeProtect 7300 Hardware Installation Manual

Marca: Edgewater Networks

Modello: EdgeProtect 7300

Tipo: Hardware Installation Manual

htt

dge

essi

ard

gewate

95 Northwe

nta Clara,

p://www.ed

one: 408 3

x: 408 727-

rot

n B

are I

tworks, Inc.

tern Parkw

95051

ewaternet

1-7200

430

ct 7

rde

stall

orks.com

00 E

tion

nter

troll

uide

rise

Trademarks

EDGEWATER NETWORKS and Design, EDGEMARC, EDGEPROTECT, and EDGECONNECT are

registered trademarks of Edgewater Networks, Inc. EDGEWATER NETWORKS and EDGEVIEW

are trademarks of Edgewater Networks, Inc. Any other trademarks appearing in this manual are

owned by their respective companies.

This document is protected by copyright and distributed under licenses restricting its use, copying,

distribution, and decompilation. No part of this document may be reproduced in any form by any

means without prior written authorization of Edgewater Networks, Inc. Documentation is provided

“as is” without warranty of any kind, either express or implied, including any kind of implied or

express warranty of non-infringement of the implied warranties of merchantability or fitness for a

particular purpose.

Export Notice

You (Purchaser) acknowledge that these products are subject to the U.S. Export Administration

Regulations (the “EAR”) and that you will comply with the EAR. You are not located in Cuba, Iran,

North Korea, Sudan, and Syria. You will not export or re-export this product, directly or indirectly, to:

(1) any countries that are subject to US export restrictions (currently including, but not necessarily

limited to, Cuba, Iran, North Korea, Sudan, and Syria); (2) any end user who you know or have

reason to know will utilize them in the design, development or production of nuclear, chemical or

biological weapons, or rocket systems, space launch vehicles, and sounding rockets, or unmanned

air vehicle systems; or (3) any end user who has been prohibited from participating in US export

transactions by any federal agency of the US government. In addition, you are responsible for

complying with any local laws in your jurisdiction which may impact your right to import, export or

use these products.

Licensing

Use of this product is subject to Edgewater Networks Software License Agreement.

Portions of this product include software sponsored by the Free Software Foundation and are

covered by the GNU GENERAL PUBLIC LICENSE.

See the

www.edgewaternetworks.com/licensing for more information regarding licenses.

Warranty

Product warranty does not apply to damage caused by lightning, power surges, or wrong voltage

usage.

Typographical Errors

This publication could include technical inaccuracies or typographical errors, for which Edgewater

Networks never can or shall be held liable. Changes are made periodically to the information herein;

these changes will be incorporated in new releases of this publication. Edgewater Networks may

make improvements or changes in the product or products described in this publication at any time,

without prior notice.

Contents

1 Overview ........................................................................................................................ 4

EdgeProtect 7300 Front Panel .................................................................................. 4

EdgeProtect 7300 Back Panel .................................................................................. 5

EdgeProtect 7300 Ethernet LED’s ............................................................................ 6

Serial Craft Console Port Cable Pinout ..................................................................... 7

Specifications and Certifications ............................................................................... 8

2 Physical Installation ...................................................................................................... 9

EdgeProtect 7300 Shipping Contents ....................................................................... 9

Desktop, Shelf, or Tray Installation ........................................................................... 9

Rack- Mount Installation .......................................................................................... 10

Connecting the Power and Cables .......................................................................... 10

Connecting to the EdgeProtect 7300 for the First Time .......................................... 11

A Compliance and Certifications for the EdgeProtect 7300 ....................................... 12

USA and Canadian Notices ..................................................................................... 12

Class A Statements ................................................................................................. 14

EEA Regulatory Notices .......................................................................................... 14

Restriction of Hazardous Substances Directive (RoHS) ......................................... 16

End of Life Products ................................................................................................ 16

B Hardware Warranty ..................................................................................................... 17

Edge

Symb

gewate

rvie

e EdgeProt

tures along

pliance for

geProtect 7

pporting up

is guide pro

tructions fo

tices. It als

rotec

l Functi

Power

Data St

tworks, Inc

ct 7300 En

side a full s

edium to l

300 provid

to 1,000 co

vides an ov

installing t

includes th

7300

n C

tatus G

tus R

All rights r

prise Se

ite of netw

rge enterpr

s the dema

current call

rview of th

e EdgePro

hardware

ront P

Sig

een Off –

On –

d Off –

On –

served.

sion Borde

rking capa

se custome

cation poin

EdgeProt

ect 7300 h

warranty.

nel

No Power, t

Power is go

No data acc

Data is bein

Controlle

ilities into a

rs. Used in

for real-tim

ct 7300 ha

rdware, an

e system is

d, the syste

ss to the ID

written to th

ombines v

single, eas

large office

, interactiv

dware com

complianc

is on

drive

e IDE drive

ice and dat

-to-use

eployment

IP service

onents,

and certifi

, the

ation

EdgeProtect 7300 Back Panel

Component Description

Erase Button

 1 Click – No action

 2 Clicks - Reset CLI and GUI password – no service interruption

 3 Clicks - Restore to factory default and reboots the system

VGA Port

Currently not used

Port 6, Port 5,

Port 4

Currently not used

Port 3 -

Management

Interface

1 x 10/100/1000 Mbps RJ-45 Ethernet port for optional management network

connectivity. This interface must not be on the same network as the WAN or LAN

subnets. This network cannot be within a subnet contained in a “Route” statement

Port 2 - WAN

Interface

1 x 10/100/1000 Mbps RJ-45 Ethernet port for connectivity to the WAN or Internet

network connectivity - Default IP: none

Port 1 - LAN

Interface

1 x 10/100/1000 Mbps RJ-45 Ethernet port for LAN network connectivity. Default

IP: 192.168.1.1

USB Ports

Currently not used.

Serial Craft

Console Port

1 x RJ-45 serial craft console port for management. 9600-N-8-1 NONE for flow

control. An RJ-45 to DB9 console cable is included in the box with the

EdgeProtect 7300.

Input Power

Socket

Accepts 3-pin shroud female plug for input power

ON/OFF Switch

System power on/off

EdgeProtect 7300 Ethernet LED’s

Label Color Indication Status

ACK/LINK

Green or other On

 Ethernet port is receiving power

 Good link between the Ethernet port and the

connected switch

Off

 The adapter and switch are not receiving power

 No connection between both ends of the network

cable. Check cable, replace cable.

Green or other Flashing The adapter is sending and receiving network data. The

frequency of the flashing varies with the amount of data

being transferred.

Speed

Yellow On ACK/LINK LED must be on. This LED will show the

system operating at 1000 Mbps

Green On ACK/LINK LED must be on. This LED will show the

system operating at 100 Mbps

Off ACK/LINK LED must be on. This LED will show the

system operating at 10 Mbps

Serial

gewate

Craft

e EdgeProt

nnecting th

nfiguration

e RJ45-to-

in DB9

DTR

TXD

RXD

DSR

GND

DTR

CTS

RTS

tworks, Inc

onsol

ct 7300 is

RJ-45 seri

nd debuggi

B9 cable h

Signal

All rights r

Port

hipped wit

l craft cons

ng.

s the follo

B9 to RJ4

in 1 to Pin

in 2 to Pin

in 3 to Pin

in 4 to Pin

in 5 to Pin

in 6 to Pin

in 7 to Pin

in 8 to Pin 1

served.

able

an RJ-45 t

ole port to

ing pinout:

and Pin 5

inout

DB-9 cabl

computer t

RJ45 Sig

RTS

DTR

TXD

GND

SGND

RXD

DSR

CTS

(see exa

perform a

nal P

ple below)

vanced

Specifications and Certifications

Ethernet ports 6 x 10/100/1000 Ethernet

Serial Ports 1 x RJ-45 serial craft console port for management

Dimensions W: 437.8mm / 17.2” x D: 445mm / 17.5” x H: 44mm / 1.73” (1U)

Weight 12.75 lbs

Power 100/240v VAC - auto-selecting, 50 to 60 Hz - 200W MAX AC Input - BTU/h = 682

Warranty 3 Years

Environmental

Requirement

Operating Temperature: 0° to 40°C

Relative Humidity: 10% to 90%

Certifications RoHS 2.0 Compliant

WEEE Compliant

Safety UL/cUL, LVD, Gost-R, Mexico CoC, UL-AR

Emissions FCC Part 15 Class A, ICES-003, VCCI Class A, KCC, CCC, C-tick, BSMI,

ANATEL

Immunity CE

MTBF 7300 = 96,000 hrs

Physical Installation

The EdgeProtect 7300 is designed for desktop, shelf, tray, or rack mount installation.

Observe the following guidelines when installing the system:

 Always verify that the AC cord is disconnected from a power source prior to installation.

 Do not stack multiple units on top of each other as this can cause overheating.

 Ensure that the installation site has adequate air circulation and meets the minimum

operating conditions for the system as specified in the “Specifications and

Certifications” section of this document.

EdgeProtect 7300 Shipping Contents

The EdgeProtect 7300 is shipped with the following components:

 EdgeProtect 7300 appliance

 Rack mount kit

 AC Power Cord

 RJ-45 to DB-9 serial craft console port cable.

Desktop, Shelf, or Tray Installation

1. Remove the EdgeProtect 7300 and accessories from the shipping container.

2. Place the EdgeProtect 7300 on a flat, dry surface such as a desktop, shelf or tray.

Rack- Mount Installation

You can install the EdgeProtect 7300 in a 19” rack using the rack mount kit supplied with

the product.

IMPORTANT

Before installing the EdgeProtect 7300 in a rack, take note of the following

conditions:

Elevated Operating Ambient Temperature - If installed in a closed or multi-unit rack

assembly, the operating ambient temperature of the rack environment may be greater than

room ambient. Therefore, consideration should be given to installing the equipment in an

environment compatible with the maximum ambient temperature specified by the

manufacturer.

Reduced Air Flow - Installation of the equipment in a rack should be such that the amount

of airflow required for safe operation of the equipment is not compromised.

Mechanical Loading - Mounting of the equipment in the rack should be such that a

hazardous condition is not achieved due to uneven mechanical loading.

Circuit Overloading - Consideration should be given to the connection of the equipment

to the supply circuit and the effect that overloading of the circuits might have on

overcurrent protection and supply wiring. Appropriate consideration of equipment

nameplate ratings should be used when addressing this concern.

Reliable Earthing - Reliable earthing of rack-mounted equipment should be maintained.

Particular attention should be given to supply connections other than direct connections to

the branch circuit (e.g. use of power strips).

To install the EdgeProtect in a rack:

1. Attach the rack mount ears to both sides of the EdgeProtect chassis with the supplied

screws.

2. Install the chassis in the rack with rack mount screws (not included).

Connecting the Power and Cables

The EdgeProtect 7300 comes with an AC power cord for connecting the unit to the AC

outlet.

Warning

Always connect the AC power cord to an AC outlet suitable for the power supply

per the Power specifications listed in this document in order to reduce the risk of

damage to the EdgeProtect 7300 power supply.

1. Connect one end of the AC power cord to the EdgeProtect 7300 input power socket

and the other end to the AC outlet. You may need to apply a bit of force to properly

position the plug in the power socket.

Caution

Secure the AC power cord to a cable management system using a fastener or

tie wrap to insure the EdgeProtect 7300 does not hang from the AC outlet.

2. If connecting to an Internet router, Internet DMZ switch, cable modem or DSL modem,

connect the Ethernet cable to the WAN Interface port (Port 2) on the EdgeProtect 7300

and the other end to the WAN device.

Connecting to the EdgeProtect 7300 for the First Time

The EdgeProtect 7300 is pre-configured with the IP address 192.168.1.1 on the LAN

interface port (Port 1).

1. Connect the 3-pin female power cord plug to the power socket on the EdgeProtect

7300. Connect the other end to an AC wall outlet.

2. Turn on the EdgeProtect 7300 power switch.

3. Make sure that the power and status LEDs on the front panel are solid green after the

EdgeProtect 7300 powers on.

4. Connect a computer to the LAN interface port (Port 1) using an Ethernet cable or

connect to an Ethernet switch (using the IP address 192.168.1.2 and subnet mask

255.255.255.0).

5. Launch a web browser on the computer and enter the URL string

http://192.168.1.1.

6. Press Return. The EdgeProtect VoIP Operating System (VOS) log in screen opens:

7. Log in with the following credentials:

User name: admin

Password: default

8. The EdgeProtect VOS system window opens.

9. Configure Network parameters are other settings for your EdgeProtect 7300 using the

instructions in the EdgeProtect VOS User Guide available on the Edgewater Networks

web site:

www.edgewaternetworks.com.

Compliance and Certifications for the

EdgeProtect 7300

Warning

This is a Class A product. In a domestic environment, this product may cause radio

interference in which case the user may be required to take adequate measures.

USA and Canadian Notices

FCC Notice

Class A Digital Device or Peripheral

This equipment has been tested and found to comply with the limits for a Class A digital device,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference when the equipment is operated in a commercial environment. This

equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in

accordance with the instruction manual, may cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause harmful interference in which case

the user will be required to correct the interference at his own expense.

In accordance with Part 15 of the FCC rules, the user is cautioned that any changes or

modifications not expressly approved by Edgewater Networks, Inc. could void the user's authority to

operate this equipment.

The socket outlet to which this apparatus is connected must be installed near the equipment and

must always be readily accessible.

Part 15 FCC Rules

This device complies with part 15 of the FCC rules. Operation is subject to the following two

conditions:

1) This device may not cause harmful interference, and

2) This device must accept any interference received, including interference that may cause

undesired operation.

Industry Canada (IC)

This Class [A] digital apparatus complies with Canadian ICES-003.

Cet appareil numerique de la Classe [A] est conforme à la norme NMB-003 du Canada.

The Industry Canada label identifies certified equipment. This certification means that the equipment

meets telecommunications network protective, operational and safety requirements as prescribed in

the appropriate Terminal Equipment Technical Requirements document(s). The Department does

not guarantee the equipment will operate to the user's satisfaction.

Before installing this equipment, users should ensure that it is permissible to be connected to the

facilities of the local telecommunications company. The equipment must also be installed using an

acceptable method of connection. The customer should be aware that compliance with the above

conditions may not prevent degradation of service in some situations. Repairs to certified equipment

should be coordinated by a representative designated by the supplier. Any repairs or alterations

made by the user to this equipment, or equipment malfunctions, may give the telecommunications

company cause to request the user to disconnect the equipment.

Users should ensure for their own protection that the electrical ground connections of the power

utility, telephone lines and internal metallic water pipe system, if present, are connected together.

This precaution may be particularly important in rural areas.

Caution

Users should not attempt to make such connections themselves, but should contact the

appropriate electric inspection authority, or electrician, as appropriate.

The Ringer Equivalence Number (REN) assigned to each relevant terminal device provides an

indication of the maximum number of terminals allowed to be connected to a telephone interface.

The termination on an interface may consist of any combination of devices subject only to the

requirement that the sum of the RENs of all the devices does not exceed 5.

The REN of this equipment is either marked on the unit or included in the new style USA FCC

registration number. In the case that the REN is included in the FCC number, the user should use

the following key to determine the value:

The FCC number is formatted as US:AAAEQ#TXXX.

# is the Ringer Equivalence Number without a decimal point (e.g. REN of 1.0 will be shown as 10,

REN of 0.3 will be shown as 03). In the case of a Z ringer, ZZ shall appear. In the case of approved

equipment without a network interface or equipment not to be connected to circuits with analog

ringing supplied, NA shall appear.

The REN is useful to determine the quantity of devices that may be connected to the telephone line.

Excessive RENs on the telephone line may result in the devices not ringing in response to an

incoming call. In most, but not all areas, the sum of RENs of all devices that may be connected to a

line, is determined by the total RENs, contact the local telephone company.

Class

EEA

[

gewate

A Stat

pan

rea

ina

egula

Mark R &

is Edgewate

pliance wit

claration o

nglish:

esky

zech]:

ansk

anish]:

eutsch

erman]:

esti

stonian]:

tworks, Inc

ement

ory N

TE Directi

EdgeProtec

EEC Directi

f Conformi

Hereby, E

the essent

Edgewate

základním

Undertegn

7300 over

Hiermit er

Übereinsti

Bestimmu

Käesoleva

1999/5/EÜ

sätetele.

All rights r

tices

system has

es 89/336/E

gewater Net

al requiremen

Networks tím

požadavky a

ede Edgewate

older de væs

lärt Edgewate

mung mit de

gen der Richt

ga kinnitab Ed

põhinõuetele

served.

been marke

EC, 73/23/E

orks, declares

s and other re

o prohlašuje,

alšími písluš

r Networks er

ntlige krav og

Networks, da

grundlegend

inie 1999/5/E

ewater Netw

a nimetatud d

with the CE

C 1999/5/E

that this Edge

levant provisi

e tento Edge

nými ustanov

lærer herved,

øvrige releva

ss sich das G

n Anforderun

befindet.

rks seadme

rektiivist tulen

mark. This

Protect 7300 i

ns of Directiv

rotect 7300 je

ními smrnice

at følgende ud

te krav i direk

rät EdgeProt

en und den ü

dgeProtect 73

vatele teistel

ark indicate

in complianc

1999/5/EC.

ve shod se

1999/5/ES.

styr EdgeProt

iv 1999/5/EF.

ct 7300 in

rigen einschl

00 vastavust d

asjakohastel

with

gigen

irektiivi

Español

[Spanish]:

Por medio de la presente Edgewater Networks declara que el EdgeProtect 7300 cumple

con los requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de

la Directiva 1999/5/CE.



[Greek]:

   Edgewater Networks   EdgeProtect 7300

        

   1999/5/.

Français

[French]:

Par la présente Edgewater Networks déclare que l'appareil EdgeProtect 7300 est

conforme aux exigences essentielles et aux autres dispositions pertinentes de la directive

1999/5/CE.

Italiano

[Italian]:

Con la presente Edgewater Networks dichiara che questo EdgeProtect 7300 è conforme

ai requisiti essenziali ed alle altre disposizioni pertinenti stabilite dalla direttiva 1999/5/CE.

Latviski

[Latvian]:

Ar šo Edgewater Networks deklar, ka EdgeProtect 7300 atbilst Direktvas 1999/5/EK

btiskajm prasbm un citiem ar to saisttajiem noteikumiem.

Lietuvi

[Lithuanian]:

Šiuo Edgewater Networks deklaruoja, kad šis EdgeProtect 7300 atitinka esminius

reikalavimus ir kitas 1999/5/EB Direktyvos nuostatas.

Nederlands

[Dutch]:

Hierbij verklaart Edgewater Networks dat het toestel EdgeProtect 7300 in

overeenstemming is met de essentiële eisen en de andere relevante bepalingen van

richtlijn 1999/5/EG.

Malti

[Maltese]:

Hawnhekk, Edgewater Networks, jiddikjara li dan EdgeProtect 7300 jikkonforma mal-

tiijiet essenzjali u ma provvedimenti orajn relevanti li hemm fid-Dirrettiva 1999/5/EC.

Magyar

[Hungarian]:

Alulírott, Edgewater Networks nyilatkozom, hogy a EdgeProtect 7300 megfelel a

vonatkozó alapvetõ követelményeknek és az 1999/5/EC irányelv egyéb elõírásainak.

Polski [Polish]:

Niniejszym Edgewater Networks owiadcza, e EdgeProtect 7300 jest zgodny z

zasadniczymi wymogami oraz pozostałymi stosownymi postanowieniami Dyrektywy

1999/5/EC

Português

[Portuguese]:

Edgewater Networks] declara que este EdgeProtect 7300 está conforme com os

requisitos essenciais e outras disposições da Directiva 1999/5/CE.

Slovensko

[Slovenian]:

Edgewater Networks izjavlja, da je ta EdgeProtect 7300 v skladu z bistvenimi zahtevami

in ostalimi relevantnimi določili direktive 1999/5/ES.

Slovensky

[Slovak]:

Edgewater Networks týmto vyhlasuje, že EdgeProtect 7300 spa základné požiadavky a

všetky príslušné ustanovenia Smernice 1999/5/ES.

Suomi

[Finnish]:

Edgewater Networks vakuuttaa täten että EdgeProtect 7300 tyyppinen laite on direktiivin

1999/5/EY oleellisten vaatimusten ja sitä koskevien direktiivin muiden ehtojen mukainen.

Svenska

[Swedish]:

Härmed intygar Edgewater Networks att denna EdgeProtect 7300 står I

överensstämmelse med de väsentliga egenskapskrav och övriga relevanta

bestämmelser som framgår av direktiv 1999/5/EG.

Íslenska

(Icelandic):

Hér með lýsir Edgewater Networks yfir því að EdgeProtect 7300 er í samræmi við

grunnkröfur og aðrar kröfur, sem gerðar eru í tilskipun 1999/5/EC

Norsk

[Norwegian]:

Edgewater Networks erklærer herved at utstyret EdgeProtect 7300 er i samsvar med de

grunnleggende krav og øvrige relevante krav i direktiv 1999/5/EF

Restriction of Hazardous Substances Directive (RoHS)

Edgewater Networks products are RoHS compliant, which means we have eliminated or brought to

within acceptable limits: Lead, Mercury, Cadmium, Hexavalent Chromium, Polybrominated

Biphenyls, and Polybrominated Diphenylethers. For more information please contact

support@edgewaternetworks.com.

End of Life Products

Edgewater Networks encourages you to recycle your end-of-life Edgewater Networks products in an

environmentally considerate way. In accordance with the requirements of the European Waste

Electronic and Electrical Equipment (WEEE) Directive, all Edgewater Networks products are marked

with the crossed wheelie bin symbol shown below. Products that carry this symbol should be not be

disposed of in the household or general waste stream.

Har

Edgew

2895 Nort

Santa Clar

Phone: (4

info@edge

gewate

war

r a period o

rdware will

rdware on t

document

nconforma

nconformin

gewater’s d

nconformity

ll be, at Ed

fective or to

lacement u

en hardwar

gewater wit

ter Ne

western Pa

, CA 9505

8) 351-720

waternetwo

tworks, Inc

three (3) y

substantiall

he date of

tion suppli

ce during t

Hardware

esignated r

. Edgewate

gewater’s o

refund to E

nits are shi

e failure is

hin 14 days

works,

kway

ks.com

All rights r

rran

s after s

conform t

rder if prop

d by Edge

e warranty

from Edge

pair facility

’s exclusive

ption, to ad

nd-user the

ped same

etermined

or End-use

nc.

served.

ipment of t

Edgewater

’

rly used in

ater. End-u

eriod, obta

ater, and r

freight pre

obligations

ance repla

purchase p

usiness da

y 1pm PST

will be cha

e Product,

’s published

ccordance

er shall no

in a return

turn the no

aid, with a

with respe

e such Har

ice paid for

for next-d

. Failed co

rged for ne

dgewater

specificati

with proce

ify Edgewa

uthorizatio

conforming

tatement d

t to noncon

ware, if it i

the Produc

y delivery (

ponents m

product p

arrants th

ns for such

ures descri

er of any

for the

Hardware t

scribing th

orming Har

determine

. Advance

ithin the U

st be retur

rchase.

t such

ed in

ware

to be

)

ed to

Edgewater Networks EdgeProtect 7300 Hardware Installation Manual

Marca: Edgewater Networks

Modello: EdgeProtect 7300

Tipo: Hardware Installation Manual

Scarica il pdf

rapporto

in altre lingue

English: Edgewater Networks EdgeProtect 7300

Edgewater Networks EdgeProtect 7300 Hardware Installation Manual

Edgewater Networks EdgeProtect 7300 Hardware Installation Manual

in altre lingue

Documenti correlati

Altri documenti