2017.05
V1.0
DISCLAIMER AND SAFETY
GUIDELINES
MAVIC
PRO
3
Contents
Safety At a Glance 4
NOTICE 6
Glossary 6
Pre-flight Checklist 6
Disclaimer and Warning 7
Before You Begin 10
Individual Parts 10
Regarding Genuine and Functional Parts 10
Remote Controller 11
Camera 11
Gimbal 12
Compass 12
Propulsion Systems 12
App 13
Firmware 14
Internal Storage Device 15
Product Care 15
Storage and Transportation 15
Maintenance and Upkeep 16
Flight Condition Requirements 16
Weather Conditions and Surrounding Environment 16
Interference with Flight Controller, Communications, and 16
Positioning Systems 16
Operating the Aircraft Responsibly 17
Flight Modes, Functions and Warnings 18
Flight Modes 18
Failsafe and Return-to-Home 18
Low Battery 19
Vision Positioning System 19
TapFly 20
ActiveTrack 20
Compliance with Regulations & No Fly Zones 21
Regulations 21
No Fly Zones 22
Compliance Information 24
4
Safety At a Glance
1. Environmental Considerations
Always y at locations that are clear of building and other obstacles.
DO NOT y above or near large crowds.
Avoid ying at altitudes above 400 feet (120 m).
Be very careful when ying 16,404 feet (5,000 m) or more above sea level.
Fly in moderate weather conditions with temperatures between 32° to
104° F (0° to 40° C).
2. Pre-ight Checklist
Ensure the remote controller and aircraft batteries are fully charged.
Ensure the propellers are in good condition and securely tightened.
Ensure there is nothing obstructing the motors.
Only calibrate the compass when the DJI GO
TM
4 app or the status
indicator prompt you to do so.
Check that the camera lens is clean and free of stains.
3. Operation
Stay away from the rotating propellers and motors.
Maintain line of sight of your aircraft at all times.
DO NOT answer incoming calls during ight.
DO NOT y under the inuence of alcohols or drugs.
During the Return-to-Home procedure, you can adjust the altitude to
avoid obstacles.
DO NOT y closely above reective surfaces such as water or snow,
as these terrain may affect the performance of the Vision Positioning
System.
In the instance of a Low Battery Warning, land the aircraft at a safe
location.
After landing, rst turn off the Intelligent Flight Battery, then turn off the
remote controller.
When using TapFly
TM
and ActiveTrack
TM
features, be prepared to take
control of the aircraft or press the “STOP” button on the screen or the
Intelligent Flight Pause button at all times, in case of an emergency.
4. Maintenance and Upkeep
DO NOT use aged, chipped or broken propellers.
Recommended storage temperature: between 71° and 82° F (22° and
28° C).
Refer to the Mavic Pro Intelligent Flight Battery Safety Guidelines for
more information about the safe use of the battery.
5
5. Observe Local Laws and Regulations
DO NOT y in the No Fly Zones. You can nd a complete list of these
areas at http://www.dji.com/ysafe
The DJI No Fly Zone is not a replacement for local government
regulations or good judgment.
Avoid ying in areas where rescue teams are actively using the airspace.
Fly in Open Areas Strong GPS Signal Maintain Line of Sight Fly Below
400 feet (120 m)
Avoid ying over or near obstacles, crowds, high voltage power lines, trees or bodies of water.
DO NOT y near strong electromagnetic sources such as power lines and base stations as it may
affect the onboard compass.
DO NOT use the aircraft in adverse weather conditions such as rain,
snow, fog and wind speeds exceeding 10 m/s or 22 mph.
≥
10m/s
Stay away from the rotating
propellers and motors.
No Fly Zone
Learn more at:
http://www.dji.com/ysafe
6
NOTICE
All instructions and other collateral documents are subject to change at the
sole discretion of SZ DJI TECHNOLOGY CO., LTD. For up-to-date product
information, visit http://www.dji.com and click on the Mavic Pro product
page.
Glossary
The following terms are used throughout the product literature to indicate
various levels of potential harm when operating this product:
NOTICE: Procedures, which if not properly followed, create a
possibility of physical property damage AND a little or no possibility of
injury.
CAUTION: Procedures, which if not properly followed, create the
probability of physical property damage AND a possibility of serious injury.
WARNING: Procedures, which if not properly followed, create the
probability of property damage, collateral damage, and serious injury OR
create a high probability of supercial injury.
Read the ENTIRE user manual to become
familiar with the features of this product
before operating. Failure to operate the product correctly can result in
damage to the product or personal property and cause serious injury.
This is a sophisticated product. It must be operated with caution and
common sense and requires some basic mechanical ability. Failure
to operate this product in a safe and responsible manner could result
in injury or damage to the product or other property. This product is
not intended for use by children without direct adult supervision. DO
NOT use with incompatible components or alter this product in any
way outside of the documents provided by SZ DJI TECHNOLOGY
CO., LTD. These Safety Guidelines contain instructions for safety,
operation and maintenance. It is essential to read and follow all of
the instructions and warnings in the user manual, prior to assembly,
setup or use, in order to operate the product correctly and avoid
damage or serious injury.
Pre-ight Checklist
1. Ensure that you are using only genuine parts and that all parts are in mint
condition.
Age Recommendation: Not for children under the age of 18. This is not
a toy.
7
2. Ensure the remote controller, Intelligent Flight Battery, and mobile device
are fully charged.
3. Ensure that there is no foreign object stuck to the camera lens, the Micro
SD card has been inserted into the camera, and the gimbal can rotate
freely before powering it on.
4. Ensure the propellers are securely mounted onto the motors, and the
motors can start and function normally.
5. Follow the on-screen instructions to calibrate the compass.
6. Ensure the app and aircraft's rmware have been upgraded to the latest
version.
7. Ensure that your ight area is outside the No Fly Zones and ight
conditions are suitable for ying the aircraft.
8. Be sure that you are NOT ying under the inuence of alcohol, drugs or
any substance that may impair your cognitive abilities.
9. Be familiar with the selected ight mode and understand all safety
functions and warnings.
10. Be sure to observe all local regulations, obtain appropriate
authorizations, and understand the risks. REMEMBER: It is solely your
responsibility to comply with all ight regulations.
Disclaimer and Warning
This product is NOT a toy and is not suitable for children under the age
of 18. Adults should keep the Mavic Pro out of the reach of children and
exercise caution when operating this aircraft in the presence of children.
This product is a ying camera that offers easy ight when in good working
order as set forth below. Visit http://www.dji.com for the most current
instructions and warnings and http://knowbeforeyouy.org/ for more
information about ight safety and compliance.
The information in this document affects your safety and your legal rights
and responsibilities. Read this entire document carefully to ensure proper
conguration before use. Failure to read and follow the instructions and
warnings in this document may result in product loss, serious injury to you,
or damage to your aircraft.
By using this product, you hereby signify that you have read this disclaimer
carefully and that you understand and agree to abide by the terms and
conditions herein. You agree that you are solely responsible for your own
conduct while using this product, and for any consequences thereof.
You agree to use this product only for purposes that are proper and in
accordance with all applicable laws, rules, and regulations, including
8
international and domestic airspace regulations, and all terms, precautions,
practices, policies and guidelines DJI
TM
has made and may make available.
DJI accepts no liability for damage, injury or any legal responsibility incurred
directly or indirectly from the use of this product. The user shall observe
safe and lawful practices including, but not limited to, those set forth in
these Safety Guidelines.
Data Storage and Usage
When you use our mobile app or our products or other software, data
regarding the use and operation of the product, such as ight telemetry
data (e.g., speed, altitude, battery life, and information about the gimbal
and camera) and operations records, may be automatically or manually
uploaded to and maintained on a DJI-designated server. The internal
storage device incorporated into the product stores various types of data,
including ight telemetry data. You may also provide ight telemetry data
and other data to us when you manually transmit that information from the
internal storage device to us.
When you use the aircraft, ight telemetry data and operations records,
including still and motion imagery data from one or more sensors in
the aircraft, may be automatically generated and stored on the internal
storage device. You may also provide ight telemetry data, operations
records, and other data to us when you manually transmit that information
from the internal storage device, or when you provide the internal storage
device, to us.
The information that is automatically uploaded or manually uploaded to us
does not include personal data (i.e., your name, address, email, or other
information that specically identies you), but personal data, such as your
user name, may become associated with, used to identify, or tagged to
such uploaded information when we store it. We separately describe how
we use your user name and other personal data on our privacy policy at
http://www.dji.com/policy. By using the product, the mobile app or other
software we distribute, or by manually providing data to us, you consent to
the following:
• Our storage of any ight telemetry data and other data uploaded or
provided to us, including in combination with your user name;
• Our use of any such data uploaded or provided (including your user
name) in connection providing support and services to you and to
improve our products;
9
• Our disclosure of such data uploaded or provided (including your user
name) to our agents and/or contractors who may use it on our behalf or
in connection with their relationship with us; and
• Our disclosure of such uploaded or provided data (including your user
name) as required by law, in a matter of public safety or policy, as
needed in connection with the transfer of our business assets, or if we
believe in good faith that sharing the data is necessary to protect our
rights or property.
DJI reserves the right to update this disclaimer and the safety guidelines. Please visit www.dji.com and
check your email periodically for the latest version. This disclaimer is made in various language versions;
in the event of divergence among different versions, the English version shall prevail.
10
Before You Begin
The following documents have been produced to help you safely operate
and make full use of your Mavic Pro:
In the Box
Disclaimer and Safety Guidelines
Intelligent Flight Battery Safety Guidelines
Quick Start Guide
User Manual
Check all of the included parts listed in the
In the Box
document and
read the
Disclaimer and Safety Guidelines
before ight. Then prepare
for your rst ight by using the
Quick Start Guide
and watching all of the
tutorial videos on DJI’s ofcial website (http://www.dji.com). If you have
questions, refer to the
User Manual
in the app or on DJI’s ofcial website
for more comprehensive information. Make sure you fully understand the
functionality of each individual part, the ight condition requirements, the
key contingency warning functions/systems, and all government regulations
before each ight. If you have any questions or problems during the
assembly, maintenance or use of this product, please contact DJI or a DJI
authorized dealer.
Individual Parts
Regarding Genuine and Functional Parts
To avoid component malfunction, serious injury, and property damage,
observe the following rules:
1. Use only genuine DJI parts or parts certied by DJI. Unauthorized
parts or parts from non-DJI certied manufacturers may cause system
malfunctions and compromise safety.
2. Ensure there are no foreign objects (such as water, oil, soil, sand, etc.)
inside of the aircraft or its components.
3. Ensure the aircraft and its components – including but not limited to the
remote controller, camera, gimbal, compass, propulsion system, and
battery – are all in good working order, damage-free, and functioning
well. Refer to the remaining sections in this document for more details
on how to ensure the functionality of these components.
11
Remote Controller
1. Ensure the remote controller is fully charged before each ight.
2. If the remote controller is powered on and has NOT been used for 5
minutes, it will sound an alert. After 10 minutes it will automatically power
off. Move the sticks or perform some other action to cancel the alert.
3. Adjust the clamp of the mobile device holder to allow a rm grip on your
mobile device.
4. Ensure the mobile device holder is rmly in place and does not slip.
5. Ensure the antennas of the remote controller are unfolded and adjusted
to the proper position to achieve optimal transmission quality.
6. Repair or replace the remote controller if damaged. A damaged remote
controller antenna will greatly decrease performance.
7. Linking is required if you wish to replace your remote controller or
receiver or add a new remote controller. Refer to the User Manual for
details.
8. Fully charge the battery at least once every three months to maintain
battery health.
Camera
To avoid possible serious injury and property damage, observe the following
rule:
1. DO NOT block any ventilation holes on the camera as the heat generated
may hurt you and damage the device.
1. Check camera settings before use to make sure you can adjust them to
t your needs.
2. Test the camera by shooting a few test images and check that it is
operating correctly before shooting important pictures or videos.
3. DO NOT remove the Micro SD card from the camera when it is powered on.
4. Photos or videos cannot be transmitted or copied from the camera if the
Intelligent Flight Battery is powered off.
5. Be sure to power off the Intelligent Flight Battery correctly, otherwise your
camera parameters will NOT be saved and any recorded videos may be
damaged. NOTE: Regardless of the reason, DJI will not be responsible
for any failure of an image or video to be recorded or having been
recorded in a way that is not machine readable.
12
Gimbal
1. Precision elements in the gimbal may be damaged in a collision or
impact, which may cause the gimbal to function abnormally.
2. DO NOT apply external force to the gimbal after the gimbal is powered on.
3. DO NOT add any payloads to the gimbal, as this may cause the gimbal
to function abnormally or even lead to motor damage.
4. Remove the gimbal clamp before powering on the gimbal. Re-install the
gimbal clamp to secure the gimbal’s position if you are going to store the
aircraft for an extended period.
Compass
To avoid possible serious injury and property damage, observe the following
rule:
1. Land immediately when severe drifting occurs in ight, i.e., the aircraft
does NOT y in straight lines.
Only calibrate the compass when the DJI GO 4 app or the status indicator
prompt you to do so. Observe the following rules when calibrating your
compass:
1. DO NOT calibrate your compass where there is a chance of strong
magnetic interference, such as magnetite, parking structures, and steel
reinforcements underground.
2. DO NOT carry ferromagnetic materials with you during calibration such
as cellular phones.
3. The DJI GO 4 app will prompt you to resolve the compass issue if the
compass is affected by strong interference after calibration is complete.
Follow the prompted instructions to resolve the compass issue.
Propulsion Systems
To avoid serious injury to yourself or others, which may be caused by the
rotating propellers and motors, observe the following rules:
Propellers
1. DO NOT use aged, chipped, or broken propellers.
13
2. Always power off the aircraft before touching the propellers.
3. Be aware of the sharp edges of the propellers when mounting or
removing the propellers. Wear gloves or take other protective measures
when touching the propellers.
4. Whenever necessary, use tools (e.g., wrench, screwdriver, pliers, etc.)
to remove or install the propellers.
5. Ensure the propellers are securely mounted to prevent them from
falling off the motors.
6. DO NOT turn on the motors when propellers are mounted and there are
other people or animals in the immediate vicinity.
Motors
1. Ensure the motors are securely mounted and rotating smoothly.
2. DO NOT attempt to modify the structure of the motors.
3. DO NOT touch or let your hands or body come in contact with the
motors after ight as they may be hot.
To avoid possible serious injury and property damage, observe the following
rules:
1. DO NOT block any of the ventilation holes on the motors.
2. DO NOT block any of the ventilation holes on the body of the aircraft.
Motors
1. Keep the motors free of dust.
2. If a motor is stuck and unable to rotate freely, execute the CSC
(Combination Stick Command) to stop the motors immediately.
Electronic Speed Controllers
1. Ensure the ESCs sound a normal tune when powered on.
App
1. Be sure to fully charge your mobile device before launching the app.
2. If you are using a phone as your mobile display device, be sure to
continue ying safely when the phone receives an incoming call. DO
NOT accept phone calls during ight.
3. Read all prompted safety tips, warning messages, and disclaimers
carefully. Be familiar with the related regulations in your area. You are
solely responsible for being aware of all relevant regulations and ying in
a way that is compliant.
14
a. Read and understand the warning messages before using the Auto-
take off and Auto-landing features.
b. Read and understand the warning message and disclaimer before
setting the altitude beyond the default limit.
c. Read and understand the warning messages and disclaimer before
switching between ight modes.
4. Land your aircraft immediately if there is an alert shown on the app.
5. Examine and check all warning messages on the checklist displayed in
the app prior to each ight.
6. Use the in-app simulator to practice your ight skills if you have never
operated the aircraft or if you do not have sufcient experience to be
comfortable operating the aircraft.
7. Beginner Mode is enabled by default when you launch the app for the
rst time. The aircraft’s altitude and ight distance is restricted when
ying in Beginner Mode. We recommend you y in Beginner Mode to
perfect your ight skills. Operate the actual aircraft only after you are
condent that you have mastered adequate ight skills.
8. Cache the map data of the area where you intend to y the aircraft by
connecting to the Internet before each ight.
Firmware
To avoid serious injury to children and animals, observe the following rule:
1. Keep children and animals at a safe distance during any rmware
upgrade, system calibration, and parameter setting procedures.
1. For safety, always update the rmware to the latest version when an
upgrade notication is shown in the app.
2. Firmware upgrade notications will prompt you to proceed with an
update immediately or to update the rmware within three days. If you
choose to ignore the current rmware update, you are required to accept
the prompted disclaimer. You further understand and agree that the
data including but not limited to ight telemetry data and user selection
records may be uploaded to and maintained on a DJI-designated server.
3. Be sure to download the rmware package le from the ofcial DJI
website. Verify the rmware package le’s integrity before upgrading.
4. Be sure to update the remote controller’s rmware to the latest version
after you update the aircraft’s rmware.
5. The remote controller may become unlinked from the aircraft after
updating. Re-link the remote controller and aircraft.
15
6. Be sure to check all connections and remove the propellers from the
motors before performing the rmware update.
Internal Storage Device
1. The aircraft contains an internal storage device that may store data and
operations records (including still and motion imagery data from one
or more sensors in the aircraft). Still and motion imagery data may be
automatically generated from the one or more sensors when you operate
the aircraft.
2. Due to the potentially automatic generation of imagery data by the
aircraft during operation, DO NOT operate the aircraft in areas where
people may reasonably expect privacy.
Product Care
Storage and Transportation
To avoid serious injury to children and animals, observe the following rule:
1. Small parts, such as cables and straps, are dangerous if swallowed.
Keep all parts out of reach of children and animals.
1. Store the Intelligent Flight Battery and remote controller in a cool, dry place
away from direct sunlight to ensure the built-in LiPo battery does NOT
overheat. Recommended storage temperature: between 71° and 82° F
(22° and 28° C) for storage periods of more than three months. Never
store in environments outside the temperature range of -68° to 113° F (-20°
to 45° C).
2. DO NOT allow the camera to come into contact with, or become
immersed in, water or other liquids. If it gets wet, wipe dry with a soft,
absorbent cloth. Turning on an aircraft that has fallen into water may
cause permanent component damage. DO NOT use substances
containing alcohol, benzene, thinners or other ammable substances
to clean or maintain the camera. DO NOT store the camera in humid or
dusty areas.
3. DO NOT connect this product to any USB interface that is older than version
2.0. DO NOT connect this product to any "power USB" or similar devices.
16
Maintenance and Upkeep
1. Check every part of the aircraft after any crash or violent impact. If you
have any problems or questions, please contact a DJI authorized dealer.
2. Regularly check the Battery Level Indicators to see the current battery
level and overall battery life. When the battery life reaches 0%, it can no
longer be used.
Flight Condition Requirements
Weather Conditions and Surrounding Environment
The aircraft is designed to operate in good to moderate weather
conditions. To avoid collision, serious injury and property damage,
observe the following rules:
1. DO NOT use the aircraft in severe weather conditions. These include
wind speeds exceeding 10 m/s, snow, rain, smog, heavy wind, hail,
lightning, tornadoes or hurricanes.
2. Keep the aircraft at least 10 meters (30 feet) away from obstacles,
people, animals, buildings, public infrastructure, trees, and bodies of
water when in ight. Stay even further away from the above objects as
your altitude increases.
3. Be EXTRA cautious when operating the aircraft indoors.
1. Aircraft and battery performance is subject to environmental factors such
as air density and temperature.
a. Be very careful when ying 16,404 feet (5,000 meters) or more above
sea level as battery and aircraft performance may be reduced.
2. DO NOT use the aircraft near accidents, re, explosions, oods,
tsunamis, avalanches, landslides, earthquakes, dust, or sandstorms.
Interference with Flight Controller, Communications, and
Positioning Systems
1. Fly in open areas. Tall buildings or steel structures may affect the
accuracy of the on-board compass and block the GPS signal.
2. Avoid interference between the remote controller and other wireless
17
equipment. Make sure to turn off the Wi-Fi on your mobile device.
3. DO NOT y near areas with magnetic or radio interference. These include
but are NOT limited to: high voltage lines, large scale power transmission
stations or mobile base stations and broadcasting towers. Failing to do
so may compromise the transmission quality of this product or cause
remote controller and video transmission errors which may affect ight
orientation and location accuracy. The aircraft may behave abnormally or
go out of control in areas with too much interference.
Operating the Aircraft Responsibly
To avoid serious injury and property damage, observe the following rules:
1. Make sure you are NOT drunk, taking drugs, under the inuence of
anesthesia, or suffering from dizziness, fatigue, nausea or any other
conditions, whether physical or mental, that could impair your ability to
operate the aircraft safely.
2. Upon landing, power off the aircraft rst, then switch off the remote
controller.
3. DO NOT drop, launch, re or otherwise project any dangerous payloads
on or at any buildings, persons or animals, or which could cause
personal injury or property damage.
1. Make sure you have been sufciently trained and are fully aware of any
contingency plans before accidents happen.
2. Make sure you have a ight plan and never y the aircraft recklessly.
3. Respect the privacy of others when using the camera. Make sure you
comply with local privacy laws, regulations, and moral standards.
4. DO NOT use this product for any reason other than general personal use.
DO NOT use it for any illegal or inappropriate purpose (such as spying,
military operations, or unauthorized investigations).
5. DO NOT use this product to defame, abuse, harass, stalk, threaten
or otherwise violate the legal rights (such as the right of privacy and
publicity) of others.
6. DO NOT trespass into private property of others.
18
Flight Modes, Functions and Warnings
Flight Modes
To avoid serious injury and property damage, observe the following rule:
1. DO NOT switch from P-mode to S-mode unless you are sufciently
familiar with the aircraft’s behavior for each ight mode, since
disabling GPS may result in being unable to land the aircraft safely.
P-mode or S-mode is preferred for most ight scenarios. When ying in Atti
mode, take EXTRA precautions because some features are NOT available
in A-mode.
1. P-mode (Positioning): P-mode works best when the GPS signal is
strong. The aircraft utilizes the GPS and Obstacle Sensing System to
automatically stabilize itself, navigate between obstacles or track a
moving object. Advanced features such as TapFly and ActiveTrack are
enabled in this mode.
2. S-mode (Sports): S-mode is identical to P-mode in terms of GPS
settings, however, the Obstacle Sensing System is disabled in S-mode.
In addition, handling gain values of the aircraft are adjusted in order to
enhance the maneuverability of the aircraft.
The aircraft will automatically switch to Atti mode when GPS signal is
week and the lighting condition does not meet with the requirement of
the Obstacle Sensing System. The aircraft will only be able to stabilize its
attitude by using its in Atti mode and Intelligent Flight features are disabled.
Failsafe and Return-to-Home
1. The Return-to-Home feature will NOT work if the GPS signal is insufcient
or if GPS is not active.
2. Press the RTH (Return-to-Home) Button on the remote controller to bring
the aircraft back to the Home Point instead of turning off the remote
controller.
3. Tall buildings may adversely affect the Failsafe function. Please adjust
the aircraft location, altitude and speed while returning home to avoid
obstacles.
4. Make sure to always y the aircraft within the transmission range of the
remote controller.
19
5. Only use the Failsafe and Return-to-Home functions in case of
emergency, as they may be affected by the weather, the environment, or
any nearby magnetic elds.
6. The aircraft cannot avoid obstacles during the Failsafe RTH when lighting
condition is not ideal; therefore it is important to set an appropriate
Failsafe altitude before each ight.
7. When ying indoors, the aircraft cannot perform precision hovering when
ying above the surfaces that do not have a clear pattern. Refer to the
“Vision Positioning System” section for complete indoor ying criteria.
Low Battery
1. When the Critical Battery Level Warning activates and the aircraft is
descending automatically, you may push the throttle up to maintain the
aircraft's altitude and navigate it to a more appropriate location for landing.
2. When battery warnings are triggered, promptly bring the aircraft back to
the Home Point or land to avoid losing power during ight and causing
damage to the aircraft, property, animals, and people.
Vision Positioning System
1. The Vision Positioning System cannot work properly over surfaces that
do NOT have pattern variations. The effective altitude for the Vision
Positioning System to function correctly is less than 13 meters above
ground level (AGL).
2. The Vision Positioning System may NOT function properly when the
aircraft is ying over water.
3. Keep your pets away from the aircraft when the Vision Positioning System
is activated, as the sonar sensors emit a high frequency sound that is
only audible to some pets.
4. Note that the Vision Positioning System may NOT function properly when
the aircraft is ying too fast or too low.
5. Operate the aircraft cautiously when in any of the following situations:
a. Flying over monochrome surfaces (e.g., pure black, pure white, pure
red, pure green).
b. Flying over highly reective surfaces;
c. Flying at high speeds (over 10m/s at 2 meters or over 5m/s at 1 meter);
d. Flying over water or transparent surfaces;
e. Flying over moving surfaces or objects;
f. Flying in an area where the lighting changes frequently or drastically;
20
g. Flying over extremely dark (< 10 lux) or bright (> 10,000 lux) surfaces;
h. Flying over surfaces that can absorb sound waves (e.g., thick carpet).
i. Flying over surfaces without clear patterns or texture;
j. Flying over surfaces with identical repeating patterns or textures (e.g.
tiles with same design);
k. Flying over inclined surfaces that will deect sound waves away from
the aircraft
6. Camera calibration is required if the aircraft suffers from crashing.
Calibrate the front cameras if DJI GO 4 app prompt you to do so.
TapFly
To prevent serious injury or property damage, observe the following
guidelines:
1. DO NOT instruct the aircraft to y towards people, animals, small and
ne objects (e.g. tree branches and power lines) or transparent objects
(e.g. glass and water).
2. Watch out for potential obstacles in your surrounding area (especially
on the rear, left, and right sides of the aircraft) and stay clear of them to
avoid accidents.
3. Be prepared to take control of the aircraft or press the “STOP” button
on press the “STOP” button on the screen or the Intelligent Flight Pause
button at all times, in case of an emergency of an emergency.
1. There may be deviations between the expected and actual paths for your
TapFly selection.
2. The selectable range on the screen is limited. You cannot make TapFly
selections near the upper or lower edges of the screen.
3. The TapFly mode may NOT function properly when the aircraft is ying
over water or snow covered area.
4. Be extra cautious when ying in extremely dark (< 300 lux) or bright (>
10,000 lux) environments.
ActiveTrack
To prevent serious injury and property damage, observe the following
guidelines:
1. Ensure there are no people, animals, small and ne objects (e.g. tree
21
branches and power lines) or transparent objects (e.g. glass and water)
along the desired tracking path.
2. Watch out for potential obstacles in your surrounding area (especially
on the rear, left, and right sides of the aircraft) and stay clear of them to
avoid accidents.
3. Be prepared to take control of the aircraft or press the “STOP” button
on press the “STOP” button on the screen or the Intelligent Flight Pause
button at all times, in case of an emergency of an emergency.
4. Ensure there are no obstacles behind the aircraft when it performs
ActiveTrack in the reverse direction.
1. Be extra cautious when using ActiveTrack in any of the following
situations:
a. The movement of the tracked subject is not on a level plane;
b. The tracked subject changes shape drastically while moving;
c. The tracked subject could be blocked or out of sight for a long time;
d. When the tracked object is in snow covered area;
e. The lighting is extremely low (< 300 lux) or high (> 10,000 lux); and
f . The tracked subject has a similar color or pattern as the surrounding
environment.
2. You must follow local privacy laws and regulations when using
ActiveTrack.
Compliance with Regulations & No Fly Zones
Regulations
To avoid non-compliant behavior, serious injury and property damage,
observe the following rules:
1. DO NOT operate in the vicinity of manned aircraft, regardless of
altitude. (Land immediately if necessary)
2. DO NOT y the aircraft in densely populated areas, including cities,
sporting events, exhibitions, performances, etc.
3. DO NOT y the aircraft above the authorized altitude. Remain well clear
of and DO NOT interfere with manned aircraft operations. Be aware of
and avoid other aircraft and obstacles at all times.
To avoid non-compliant behavior, serious injury and property damage,
observe the following rules:
1. DO NOT y the aircraft near or inside no y zones specied by local laws
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
dji Mavic Pro Guida utente
- Tipo
- Guida utente
- Questo manuale è adatto anche per
in altre lingue
- English: dji Mavic Pro User guide