AirLive WT-2000ARM Manuale utente

AirLive WT-2000ARM User’s Manual

1

W

T-2000ARM

802.11g Wireless LAN

ADSL 2+ Router

User’s Manual

Declaration of Conformity

We, Manufacturer/Importer

Declare that the product

802.11g Wireless LAN ADSL2+ Router

WT-2000ARM

is in conformity with

In accordance with 89/336 EEC-EMC Directive and 1999/5 EC-R & TTE Directive

Clause Description

Electromagnetic compatibility and Radio spectrum Matters (ERM);

Essential requirements under article 3.2 of the R&TTE Directive

Electromagnetic compatibility and Radio spectrum Matters (ERM);

(2004-11) Electromagnetic compatibility(EMC) standard for radio equipment and

HIPERLAN equipment

Generic standard to demonstrate the compliance of low power

Electronic and electrical apparatus with the basic restrictions related

to human exposure to electromagnetic field (10MHz – 300GHz)

-General public

Safety for information technology equipment including electrical

Business equipment

Manufacturer/Importer

Position/ Title : Vice President

OvisLink Corp.

5F., NO.6, Lane 130, Min-Chuan Rd.,

Hsin-Tien City, Taipei County, Taiwan

■ EN 300 328 V1.6.1

(2004-11)

Wideband transmission equipment operating in the 2.4GHz ISM band

And using spread spectrum modulation techniques; Part 1：technical

Characteristics and test conditions Part2：Harmonized EN covering

■ EN 301 489-1 V1.5.1

■ EN 301 489-17 V1.2.1

Services; Part 17：Specific conditions for wideband data and

(2002-08)

■ EN 50371: 2002

■ EN 60950-1: 2001/A11

:2004

■ CE marking

Signature：

Name ：

Albert Yeh

Date： 2006/10/26

(Stamp)

WT-2000ARM CE Declaration Statement

Country Declaration Country Declaration

cs

Česky [Czech]

OvisLink Corp. tímto prohlašuje, že tento

WT-2000ARM je ve shodě se základními

požadavky a dalšími příslušnými ustanoveními

směrnice 1999/5/ES.

lt

Lietuvių

[Lithuanian]

iuo OvisLink Corp. deklaruoja, kad šisWT-2000ARM

atitinka esminius reikalavimus ir kitas 1999/5/EB

Direktyvos nuostatas.

da

Dansk [Danish]

Undertegnede OvisLink Corp. erklærer herved, at

følgende udstyr WT-2000ARM overholder de

væsentlige krav og øvrige relevante krav i direktiv

1999/5/EF.

nl

Nederlands [Dutch

Hierbij verklaart OvisLink Corp. dat het toestel

WT-2000ARM in overeenstemming is met de

essentiële eisen en de andere relevante bepalingen

van richtlijn 1999/5/EG.

de

Deutsch

[German]

Hiermit erklärt OvisLink Corp., dass sich das

Gerät WT-2000ARM in Übereinstimmung mit den

grundlegenden Anforderungen und den übrigen

einschlägigen Bestimmungen der Richtlinie

1999/5/EG befindet.

mt

Malti [Maltese]

Hawnhekk, OvisLink Corp, jiddikjara li dan

WT-2000ARM jikkonforma mal-ħtiġijiet essenzjali u

ma provvedimenti oħrajn relevanti li hemm

fid-Dirrettiva 1999/5/EC.

et

Eesti [Estonian]

Käesolevaga kinnitab OvisLink Corp. seadme

WT-2000ARM vastavust direktiivi 1999/5/EÜ

põhinõuetele ja nimetatud direktiivist tulenevatele

teistele asjakohastele sätetele.

hu

Magyar

[Hungarian]

Alulírott, OvisLink Corp nyilatkozom, hogy a

WT-2000ARM megfelel a vonatkozó alapvetõ

követelményeknek és az 1999/5/EC irányelv egyéb

elõírásainak.

en

English

Hereby, OvisLink Corp., declares that this

WT-2000ARM is in compliance with the essential

requirements and other relevant provisions of

Directive 1999/5/EC.

pl

Polski [Polish]

Niniejszym OvisLink Corp oświadcza, że

WT-2000ARM jest zgodny z zasadniczymi

wymogami oraz pozostałymi stosownymi

postanowieniami Dyrektywy 1999/5/EC.

es

Español

[Spanish]

Por medio de la presente OvisLink Corp. declara

que el WT-2000ARM cumple con los requisitos

esenciales y cualesquiera otras disposiciones

aplicables o exigibles de la Directiva 1999/5/CE.

pt

Português

[Portuguese]

OvisLink Corp declara que este WT-2000ARM está

conforme com os requisitos essenciais e outras

disposições da Directiva 1999/5/CE.

el

Ελληνική [Greek]

ΜΕ ΤΗΝ ΠΑΡΟΥΣΑ OvisLink Corp. ΔΗΛΩΝΕΙ

ΟΤΙWT-2000ARM ΣΥΜΜΟΡΦΩΝΕΤΑΙ ΠΡΟΣ ΤΙΣ

ΟΥΣΙΩΔΕΙΣ ΑΠΑΙΤΗΣΕΙΣ ΚΑΙ ΤΙΣ ΛΟΙΠΕΣ

ΣΧΕΤΙΚΕΣ ΔΙΑΤΑΞΕΙΣ ΤΗΣ ΟΔΗΓΙΑΣ

1999/5/ΕΚ.

sl

Slovensko

[Slovenian]

OvisLink Corp izjavlja, da je ta WT-2000ARM v

skladu z bistvenimi zahtevami in ostalimi relevantnimi

določili direktive 1999/5/ES.

fr

Français [French]

Par la présente OvisLink Corp. déclare que

l'appareil WT-2000ARM est conforme aux

exigences essentielles et aux autres dispositions

pertinentes de la directive 1999/5/CE

sk

Slovensky [Slovak]

OvisLink Corp týmto vyhlasuje, že WT-2000ARM

spĺňa základné požiadavky a všetky príslušné

ustanovenia Smernice 1999/5/ES.

it

Italiano [Italian]

Con la presente OvisLink Corp. dichiara che

questo WT-2000ARM è conforme ai requisiti

essenziali ed alle altre disposizioni pertinenti

stabilite dalla direttiva 1999/5/CE.

fi

Suomi [Finnish]

OvisLink Corp vakuuttaa täten että WT-2000ARM

tyyppinen laite on direktiivin 1999/5/EY oleellisten

vaatimusten ja sitä koskevien direktiivin muiden

ehtojen mukainen

lv

Latviski [Latvian]

Ar šo OvisLink Corp. deklarē, ka WT-2000ARM

atbilst Direktīvas 1999/5/EK būtiskajām prasībām

un citiem ar to saistītajiem noteikumiem.

Íslenska [Icelandic]

Hér með lýsir OvisLink Corp yfir því að WT-2000ARM

er í samræmi við grunnkröfur og aðrar kröfur, sem

gerðar eru í tilskipun 1999/5/EC.

sv

Svenska

[Swedish]

Härmed intygar OvisLink Corp. att denna

WT-2000ARM står I överensstämmelse med de

väsentliga egenskapskrav och övriga relevanta

bestämmelser som framgår av direktiv

1999/5/EG.

no

Norsk [Norwegian]

OvisLink Corp erklærer herved at utstyret

WT-2000ARM er i samsvar med de grunnleggende

krav og øvrige relevante krav i direktiv 1999/5/EF.

A copy of the full CE report can be obtained from the following address:

OvisLink Corp.

5F, No.6 Lane 130,

Min-Chuan Rd, Hsin-Tien City,

Taipei, Taiwan, R.O.C.

This equipment may be used in AT, BE, CY, CZ, DK, EE, FI, FR, DE, GR, HU, IE, IT, LV, LT, LU, MT, NL, PL,

PT, SK, SI, ES, SE, GB, IS, LI, NO, CH, BG, RO, TR

AirLive WT-2000ARM User’s Manual

2

Copyright

The contents of this publication may not be reproduced in any part or as a whole, stored, transcribed

in an information retrieval system, translated into any language, or transmitted in any form or by any

means, mechanical, magnetic, electronic, optical, photocopying, manual, or otherwise, without the

prior written permission.

FCC Interference Statement

This equipment has been tested and found to comply with the limits for a Class B digital device

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against radio interference in a residential environment. AirLive WT-2000 ARM can generate, use and

radiate radio frequency energy and, if not installed and used in accordance with the instructions in this

manual, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If AirLive

WT-2000 ARM does cause harmful interference to radio or television reception, which is found by

turning the equipment ON and OFF, the user is encouraged to try to reduce the interference by one or

more of the following measures:

y Adjust or relocate the receiving antenna

y Increase the separation between the equipment or device

y Consult a dealer or an experienced technician for assistance

CE Declaration of Conformity

This is to certify that this device complies the essential protection requirements of the European

Council Directive 89/336/EEC, Article 4a. Conformity is declared by the application of EN 55 022

Class B (CISPR 22). Compliance with the applicable regulations is dependent upon the use of

shielded cables. It is the responsibility of the user to procure the appropriate cables.

AirLive WT-2000ARM User’s Manual

Table of Contents

CHAPTER I: INTRODUCTION ........................................................................................................1

1.1. F

EATURES.........................................................................................................................1

1.2. M

INIMUM REQUIREMENTS ..................................................................................................2

1.3. P

ACKAGE CONTENT...........................................................................................................2

1.4. H

ARDWARE PLACEMENT ....................................................................................................3

1.4.1. Rear Panel..............................................................................................................3

1.4.2. Front LEDs .............................................................................................................4

CHAPTER II: HARDWARE INSTALLATION ..................................................................................5

CHAPTER III: SETUP WIZARD ......................................................................................................6

CHAPTER IV: IP ADDRESS SETTING.........................................................................................12

CHAPTER V: WEB MANAGEMENT CONFIGURATION .............................................................18

5.1

QUICK START .........................................................................................................................20

5.2 I

NTERFACE SETUP...........................................................................................................24

5.2.1 Internet .................................................................................................................24

5.2.2 LAN.......................................................................................................................28

5.2.3 Wireless................................................................................................................30

5.3 A

DVANCED SETUP...........................................................................................................33

5.3.1 Firewall .................................................................................................................33

5.3.2 Routing .................................................................................................................34

5.3.3 NAT ......................................................................................................................36

5.3.4 ADSL ....................................................................................................................38

5.4 A

CCESS MANAGEMENT ....................................................................................................40

5.4.1 ACL.......................................................................................................................40

5.4.2 IP Filter .................................................................................................................41

5.4.3 SNMP ...................................................................................................................43

5.4.4 UPnP ....................................................................................................................44

5.4.5 DDNS ...................................................................................................................45

5.5 M

AINTENANCE.................................................................................................................46

5.5.1 Administrator ........................................................................................................46

5.5.2 Time Zone ............................................................................................................47

5.5.3 Firmware...............................................................................................................48

5.5.4 System Restart .....................................................................................................49

5.5.5 Diagnostics ...........................................................................................................49

5.6 S

TATUS...........................................................................................................................50

5.6.1 Device Info............................................................................................................50

5.6.2 System Log...........................................................................................................51

5.6.3 Statistics ...............................................................................................................52

CHAPTER VI: TROUBLESHOOTING...........................................................................................53

CHAPTER VII: GLOSSARY ..........................................................................................................56

AirLive WT-2000ARM User’s Manual

1

Chapter I: Introduction

Congratulations on purchasing this 802.11g Wireless LAN ADSL2+ Router. This router is a cost-

effective ADSL2+ router, with the combination of an ADSL2+ modem, router, Ethernet network switch

and wireless access point, you can surf the Internet through your ADSL2/2+ broadband connection

without investing other devices.

This router can support downstream transmission rates of up to 24Mbps and upstream transmission

rates of up to 1Mbps. It supports PPPoA (RFC 2364 - PPP over ATM Adaptation Layer 5), RFC

1483/2684 encapsulation over ATM (bridged or routed) and PPP over Ethernet (RFC 2516) to

establish a connection with ISP. The product also supports VC-based and LLC-based multiplexing.

With the web management interface, users can easily configure the various functions of the router

including DHCP server, NAT, virtual server, DMZ, access control, IP filter, Firewall, PPTP/IPSec/L2TP

pass-through, DDNS, UPnP, Wireless and etc.

This router is a high performance and high-speed device that provides a full rate of ADSL2+ standard

with the superb reliability and a complete solution for home and office application.

1.1. Features

ADSL2/2+ Compliance

• Support downstream rates of up to 24Mbps and upstream rates of up to 1Mbps.

• Compliant to ITU-T G.992.1 (G.dmt), G.992.2 (G.lite), G.992.3 (ADSL2), G.992.4 (splitterless

ADSL2), G.992.5 (ADSL2+) for Annex A, B. (Annex A and B are supported in different H/W

platform)

• Supports Multi-Mode standard (ANSI T1.413, Issue 2; G.dmt (G.992.1); G.994.1 and G.996.1

(for ISDN only); G.991.1;G.lite (G992.2)).

• Multiple Protocols over AAL5 (RFC 1483/2684).

• PPP over AAL5 (RFC 2364).

• PPP over Ethernet (RFC 2516).

Support 802.11g Wireless Access Point

• Complies with IEEE 802.11g/b standard.

• High data rate – up to 54Mbps network speed.

• Supports 64-bit/128-bit WEP, WPA-PSK and WPA2-PSK wireless security functions.

• Supports MAC address filtering.

AirLive WT-2000ARM User’s Manual

2

Router

• NAT (Network Address Translation) IP Sharing

• Virtual Server

• DMZ

• VPN Pass Through (IPSec/PPTP/L2TP)

• SPI Anti-DOS Firewall

• DHCP Server and Client

Access Management

• ACL (Access Control)

• IP Filter

• UPnP (Universal Plug and Play)

• SNMP

• Dynamic DNS

1.2. Minimum Requirements

The following devices are necessary to configure and use the ADSL2+ Router:

• A PC with Pre-installed Ethernet Adapter (Required) and a Web-Browser (Internet Explorer

4.0 or higher)

• RJ-45 Ethernet crossover cable (Included in the package)

• RJ-11 (ADSL Ready) phone Line

1.3. Package Content

• One ADSL2+ Router (Annex A or B)

• One Dipole Antenna

• One Power Adapter (12VDC, 1A)

• One RJ-45 Ethernet Cable (100 cm)

• One RJ-11 Telephone Line (180 cm)

• One Quick Installation Guide

• One CD with full User Manual

AirLive WT-2000ARM User’s Manual

3

1.4. Hardware Placement

1.4.1. Rear Panel

1) Antenna Connector

The antenna connector of the router is reverse SMA connector. It allows you to connecting an

external antenna with reverse SMA connector to the router easily.

2) Reset

The Reset button can be used to reset the router or restore to factory defaults.

z If problems occur with your router, press the router’s reset button with a pencil tip (for less

than 5 seconds) and the router will re-boot itself, keeping your original configurations.

z If problems persist or you experience extreme problems or you forgot your password, press

the reset button for longer than 5 seconds and the router will reset itself to the factory

default settings (warning: your original configurations will be replaced with the factory

default settings)

3) Power Jack

Please plug the power adapter attached with the ADSL Router to the power jack. The power

adapter is 12VDC, 1A.

4) Local Area Network (LAN)

The router’s 4 LAN ports are where you connect your LAN’s PCs, printer servers, hubs and

switches etc.

5) ADSL

Connect the supplied RJ-11 telephone line to this port and your ADSL/telephone network.

AirLive WT-2000ARM User’s Manual

4

1.4.2. Front LEDs

On the router’s front panel there are LED lights that inform you of the router’s current status. Below is

an explanation of each LED and its description.

LED Light Status Description

On The router is ready PWR (Green)

Off Wireless LAN is disabled

Blinking Wireless traffic is transmitting or receiving

WLAN (Yellow)

On Connected to an ADSL DSLAN successfully ADSL (Green)

Blinking No connection

On

The LAN cable is connected to the router

Off

No network connection.

LAN LNK/ACT (Port 1-4)

Blinking

Network traffic transferring or receiving through

the LAN port

AirLive WT-2000ARM User’s Manual

5

Chapter II: Hardware Installation

Step 1. Connect the ADSL Line

Connect the router to your ADSL cable through the supplied RJ-11 telephone line.

Step 2. Connect the router to your LAN network

Connect the router to your PC, hub or switch by attached the Ethernet cable to the LAN port of the

router.

Step 3. Connect the Power Adapter to the Router

Connect the power adapter to the power jack on the rear panel of router.

Step4: Check the ADSL LED on the Router

The ADSL LED will be ON if the router is connected to the ADSL cable and receives the ADSL signals

successfully. If the LED is blinking, please contact with your ISP (Internet Service Provider) to check

the problem.

Note: You must use the power adapter shipped along with the router, do NOT use any other

power adapter from other sources.

AirLive WT-2000ARM User’s Manual

6

Chapter III: Setup Wizard

This router provides a Setup Wizard tool for user to configure the ADSL settings. This wizard collects

some ISP’s ADSL settings so that user can easy to configure the router’s ADSL settings by only

selecting the ISP vendor from the wizard.

If you cannot find your ISP from the wizard, please refer to the Section 5.1 to run the Quick Start

wizard in the web management of the router.

Before you start, please check the following items:

1. Please make sure that you have connected the ADSL cable to the router correctly. When the

ADSL cable is worked normally, the ADSL LED will be on.

2. Uninstall all of dial up programs if you have installed previously for the USB modem or other dial

up devices.

3. It is recommended to configure the router through the Ethernet cable before you have set the

wireless functions correctly.

This wizard can be run in Windows 98SE/Me/2000/XP. The following procedures are operated in

Windows XP. (Procedures are similar for Windows 98SE/Me/2000.)

1. Insert the CD shipped along with the ADSL router into your CD-ROM drive. The Autorun.exe

program should be executed automatically. If not, run Autorun.exe manually from “Autorun” folder

in the CD.

2. The following screen will be displayed. Click “Setup Wizard”.

AirLive WT-2000ARM User’s Manual

7

3. This wizard will be executed and try to search for the ADSL Router.

4. If the router cannot be found, please enter the IP Address and the Password of the router to

search again. Click “Next” to continue.

AirLive WT-2000ARM User’s Manual

8

5. Please select the country you have installed the ADSL router and click “Next”.

6. Please select the ISP (Internet Service Provider) of your ADSL service.

AirLive WT-2000ARM User’s Manual

9

7. Enter the Username and Password which your ISP has provided to you if it is needed. Click “Next”.

8. Click “Save” to save the settings and reboot the router.

AirLive WT-2000ARM User’s Manual

10

9. After saving and rebooting the router, the ISP settings are all finished. This wizard will then help to

set your computer to obtain IP Address from the router automatically.

Note1: Using the router to get into the Internet, the IP Address of each PC has to be set in

the same subnet as the router. This wizard will help to set the proper IP Address to your

computer.

Note2: By default, the router’s DHCP Server is enabled. If it is disabled before running the

wizard, the wizard will enable the DHCP Server of the router automatically.

AirLive WT-2000ARM User’s Manual

11

10. The ISP settings are all finished. If you want to configure more settings, please click “Advanced

Settings” or click “Finish” to close the wizard.

AirLive WT-2000ARM User’s Manual

12

Chapter IV: IP Address Setting

Using the router to get into the Internet, the PCs in the network must have Ethernet adapter installed

and be connected to the router either directly or through a hub or switch. The TCP/IP protocol of each

PC has to been installed and the IP Address of each PC has to be set in the same subnet as the

router.

The router’s default IP Address is 192.168.2.1 and the subnet mask is 255.255.255.0. PCs can be

configured to obtain IP Address automatically through the DHCP Server of the router or a fixed IP

Address in order to be in the same subnet as the router. By default, the DHCP Server of the router is

enabled and will dispatch IP Address to PC from 192.168.2.100 to 192.168.2.200. It is strongly

recommended to set obtaining IP address automatically.

This section shows you how to configure your PC’s so that it can obtain an IP address automatically

for either Windows 95/98/Me, 2000 or NT operating systems. For other operating systems (Macintosh,

Sun, etc.), please follow the manual of the operating systems. The following is a step-by-step

illustration on how to configure your PC to obtain an IP address automatically for Windows XP,

Windows 2000, Windows 95/98/Me, and Windows NT.

Windows XP

1. Click the Start button and select Control Panel and then double click Network Connections. The

Network Connections window will appear.

2. Right click on the Local Area Connection icon and select Properties. The Local Area Connection

window will appear.

3. Check your list of Network Components. You should see Internet Protocol [TCP/IP] on your list.

Select it and click the Properties button.

4. In the Internet Protocol (TCP/IP) Properties window, select Obtain an IP address automatically

and Obtain DNS server address automatically as shown on the following screen.

AirLive WT-2000ARM User’s Manual

13

5. Click OK to confirm the setting. Your PC will now obtain an IP address automatically from your

router’s DHCP server.

Note: Please make sure that the router’s DHCP server is the only DHCP server available on

your LAN.

Windows 2000

1. Click the Start button and select Settings, then click Control Panel. The Control Panel window will

appear.

2. Double-click Network and Dial-up Connections icon. In the Network and Dial-up Connection

window, double-click Local Area Connection icon. The Local Area Connection window will appear.

3. In the Local Area Connection window, click the Properties button.

4. Check your list of Network Components. You should see Internet Protocol [TCP/IP] on your list.

Select it and click the Properties button.

AirLive WT-2000ARM User’s Manual

14

5. In the Internet Protocol (TCP/IP) Properties window, select Obtain an IP address automatically

and Obtain DNS server address automatically as shown on the following screen.

6. Click OK to confirm the setting. Your PC will now obtain an IP address automatically from your

Broadband Router’s DHCP server.

Note: Please make sure that the router’s DHCP server is the only DHCP server available on

your LAN.

AirLive WT-2000ARM User’s Manual

15

Windows 95/98/Me

1. Click the Start button and select Settings, then click Control Panel. The Control Panel window will

appear.

2. Double-click Network icon. The Network window will appear.

3. Check your list of Network Components. If TCP/IP is not installed, click the Add button to install it

now. If TCP/IP is installed, go to step 6.

4. In the Network Component Type dialog box, select Protocol and click Add button.

5. In the Select Network Protocol dialog box, select Microsoft and TCP/IP and then click the OK

button to start installing the TCP/IP protocol. You may need your Windows CD to complete the

installation.

6. After installing TCP/IP, go back to the Network dialog box. Select TCP/IP from the list of Network

Components and then click the Properties button.

7. Check each of the tabs and verify the following settings:

Bindings: Check Client for Microsoft Networks and File and printer sharing for Microsoft

Networks.

Gateway: All fields are blank.

DNS Configuration: Select Disable DNS.

WINS Configuration: Select Disable WINS Resolution.

IP Address: Select Obtain IP address automatically.

8. Reboot the PC. Your PC will now obtain an IP address automatically from your router’s DHCP

server.

La pagina sta caricando ...

AirLive WT-2000ARM Manuale utente

AirLive WT-2000ARM Manuale utente

in altre lingue

Documenti correlati

Altri documenti