Florida Pneumatic FP-866A Manuale utente

•

Description

FP866A

EDN

KCO

DNA

KCO

Limited Warranty

Florida Pneumatic warrants its tools to be free from defects in material and workmanship for two

year from the date of purchase. This warranty does not apply to tools which have been abused,

misused, modified or repaired by someone other than Florida Pneumatic or its authorized service

centers. If a Florida Pneumatic proves defective in material of workmanship within two year after

purchase, return it to any authorized service center or to Florida Pneumatic, freight prepaid. Please

enclose your name, address and adequate proof of purchase date with a brief description of the

defect. Florida Pneumatic will, at its option, repair or replace defective tools, free of charge. Repairs

or replacements are warranted as described above for the remainder of the warranty period.

Florida Pneumatic's sole liability and your exclusive remedy under this warranty is limited to repair or

replacement of the defective tool. There are no other warranties expressed or implied and Florida

Pneumatic shall not be liable for incidental, consequential or special damages, or any other damages,

costs or expense of repair or replacement as described above.

Specifications

Pad size............................................................................................................3-1/2 X 6-3

/8”"

Free speed...........................................................................................................6,500 RPM

Weight......................................................................................................................4-3/4 lb

Length

.............................................................................................................................6-3/8"

Average air consumption..........................................................................................4 CFM

Recommended hose size........................................................................................3/8" I.D.

Air inlet size............................................................................................................1/4" NPT

Maximum operating pressure..................................................................................90 psi