ProLights 14 W sharp and compact moving beam Manuale utente

Marca: ProLights

Modello: 14 W sharp and compact moving beam

Categoria: Proiettori

Tipo: Manuale utente

USER MANUAL

MANUALE UTENTE

JETBEAM1

MOVING HEAD

EN - IT

reproduced in any form or by any means for any commercial use.

In order to improve the quality of products, Music&Lights S.r.l. reserves the right to modify the

characteristics stated in this instruction manual at any time and without prior notice.

All revisions and updates are available in the ‘manuals’ section on site www.musiclights.it

REV.003-11/18

JETBEAM1

Packing content

• JETBEAM1

• Mount bracket

• User manual

TABLE OF CONTENTS

Safety

General instructions

Warnings and installation precautions

1 Introduction

1. 1 Description

1. 2 Technical specications

1. 3 Operating elements and connections

2 Installation

2. 1 Mounting

3 Functions and settings

3. 1 Operation

3. 2 Basic

3. 3 Using the menu

3. 4 Menu structure

3. 5 Linking

3. 6 DMX address

3. 7 DMX conguration

3. 8 DMX addressing

3. 9 Fixture settings

3. 10 Advanced

3. 11 Fixture information

3. 12 Operation in automatic mode

3. 13 Sensitivity microphone

3. 14 Connection of the DMX line

3. 15 Construction of the DMX termination

3. 16 DMX control

3. 17 Color wheel

4 Maintenance

4. 1 Maintenance and cleaning the unit

4. 2 Fuse replacement

4. 3 Trouble shooting

JETBEAM1

WARNING! Before carrying out any operations with the unit, carefully read this instruction

manual and keep it with cure for future reference. It contains important information about

the installation, usage and maintenance of the unit.

SAFETY

General instruction

• The products referred to in this manual conform to the European Community Directives and are there-

fore marked with .

• The unit is supplied with hazardous network voltage (230V~). Leave servicing to skilled personnel only.

Never make any modications on the unit not described in this instruction manual, otherwise you will

risk an electric shock.

• Connection must be made to a power supply system tted with ecient earthing (Class I appliance ac-

cording to standard EN 60598-1). It is, moreover, recommended to protect the supply lines of the units

from indirect contact and/or shorting to earth by using appropriately sized residual current devices.

• The connection to the main network of electric distribution must be carried out by a qualied electrical

installer. Check that the main frequency and voltage correspond to those for which the unit is designed

as given on the electrical data label.

• This unit is not for home use, only professional applications.

• Never use the xture under the following conditions:

- in places wet;

- in places subject to vibrations or bumps;

- in places with an ambient temperature of over 45°C.

• Make certain that no inammable liquids, water or metal objects enter the xture.

• Do not dismantle or modify the xture.

• All work must always be carried out by qualied technical personnel. Contact the nearest sales point for

an inspection or contact the manufacturer directly.

• If the unit is to be put out of operation denitively, take it to a local recycling

plant for a disposal which is not harmful to the environment.

Warnings and installation precautions

• If this device will be operated in any way dierent to the one described in this manual, it may suer

damage and the guarantee becomes void. Furthermore, any other operation may lead to dangers like

short circuit, burns, electric shock, etc.

• Before starting any maintenance work or cleaning the projector, cut o power from the main supply.

• Always additionally secure the projector with the safety rope. When carrying out any work, always com-

ply scrupulously with all the regulations (particularly regarding safety) currently in force in the country

in which the xture’s being used.

• For inside use only. Not designed for outside use.

• The minimum distance between the xture and surrounding walls must be more than 50 cm and the

air vents at the housing must not be covered in any case.

• Install the xture in a well ventilated place.

• Keep any inammable material at a safe distance from the xture.

• The maximum temperature that can be reached on the external surface of the tting, in a thermally

steady state, is high. After power o, please cool down over 15 minutes.

• Shields, lenses or ultraviolet screens shall be changed if they have become damaged to such an extent

that their eectiveness is impaired.

• The lamp (LED) shall be changed if it has become damaged or thermally deformed.

• Never look directly at the light beam. Please note that fast changes in lighting, e. g. ashing light, may

trigger epileptic seizures in photosensitive persons or persons with epilepsy.

JETBEAM1

- 1 - INTRODUCTION

1.1 DESCRIPTION

JETBEAM1 is an extremely compact LED beam light designed to deliver the brightest beam from the

smallest footprint possible. Ideal where space is an issue, the JETBEAM1 oers simply the best value for

money in its segment with a light output far exceeding expectations. All oered in a compact size and at

an aordable price.

1.2 TECHNICAL SPECIFICATIONS

LIGHT SOURCE

• Source: 14W high-power white LED

• CT: 6200K

• CRI: 73

• Luminous ux: 577lm

• Lux: 50000lux @3m

• Lux: 4600lux @10m

• Source life expectancy: >30.000 h

OPTICS

• Beam angle: 2.5°

• Field angle:

• Lens diameter: 85mm

• Lens type: high-quality glass lens optics

COLOUR SYSTEM

• Colour wheel: 14 dichroic lters + open

DYNAMIC EFFECTS

• Circular prism: 8f with bi-directional rotation, indexing

• Auto mode: built-in programs with execution speed adjustment

• Sound mode: music activation through internal microphone and sensitivity control

BODY

• Pan angle: 540°

• Tilt angle: 270°

• Pan/Tilt resolution: 8/16 bit

• Feedback: automatic repositioning after accidental movement

• Body: aluminium structure with hi-resistance polycarbonate cover

• Body colour: black, white nishing available

CONTROL

• Protocols: DMX512, RDM

• DMX channels: 8 / 10channel

• RDM: RDM ready for xture remote monitor and settings

• Display: black OLED high resolution display

• Firmware upgrade: yes, via USB-DMX interface (UPBOX1) not included

• Master/Slave: for synchronized operation of more units linked in a chain

ELECTRONICS

• Dimmer: linear 0~100% electronic dimmer

• Strobe / shutter: 0~30 Hz, electronic

• Operating temperature: -10° ~ +45°

• Flicker: icker free operation

JETBEAM1

ELECTRICAL

• Power supply: 100-240V – 50/60Hz

• Power consumption (at 230V): 31.9W

• Power consumption (at 120V): 32.3W

• Output (at 230V): 52 units on a single power line

• Output (at 120V): 27 units on a single power line

PHYSICAL

• Cooling: forced air with low noise fan

• Sospension and xing: any position with quick-lock omega brackets

• Data: USB port for USB WIFI transmitter (optional)

• Signal connection: Amphenol XLR 5p IN/OUT connectors

• Power connection: Neutrik powerCON IN/OUT connectors

• IP rating: 20

• Dimensions (WxHxD): 220x343x170mm

• Weight: 5kg

Fig.1

343

220

170

Technical drawing

JETBEAM1

8 9 10

1.3 OPERATING ELEMENTS AND CONNECTIONS

Fig.2

1. MOVING HEAD

2. ROTARY ARM

3. Universal Serial Bus (USB)

4. LED INDICATOR

5. MICROPHONE

6. CONTROL PANEL with OLED

display and 5 button used to

access the control panel functions

and manage them.

7. DMX IN (5-pole XLR):

1 = ground, 2 = DMX-, 3 = DMX+,

4 N/C, 5 N/C

8. DMX OUT (5-pole XLR):

1 = ground, 2 = DMX-, 3 = DMX+,

4 N/C, 5 N/C

9. MAIN FUSE HOLDER: replace a

burnt-out fuse by one of the same

type only.

10. POWER IN (PowerCON IN):

for connection to a socket

(100-240V~/50-60Hz) via the

supplied mains cable.

11. POWER OUT: (PowerCON OUT) to

connect multiple units in series.

View A

View B

JETBEAM1

- 2 - INSTALLATION

2.1 MOUNTING

The JETBEAM1 may be set up on a solid and even surface. By means of the xing facilities of the baseplate,

the unit can also be mounted upside down to a cross arm. The base plate is shown in g.3. For xing, stable

mounting clips are required. According to the gure, the bolts of the brackets are placed into the openings

provided in the base plate and turned clockwise until they lock (to the stop). Always ensure that the unit

is rmly xed to avoid vibration and slipping while operating. The mounting place must be of sucient

stability and be able to support a weight of 10 times of the unit’s weight. When carrying out any installa-

tion, always comply scrupulously with all the regulations (particularly regarding safety) currently in force

in the country in which the xture’s being used. Always additionally secure the projector with the safety

rope from falling down. For this purpose, fasten the safety rope at a suitable position so that the maximum

fall of the projector will be 20 cm.

Fig.3

CLAMP

SAFETY

CABLE

OMEGA

BRACKETS

JETBEAM1

- 3 - FUNCTIONS AND SETTINGS

3.1 OPERATION

Connect the supplied main cable to a socket (100-240V~/50-60Hz). The unit will run built-in program to

reset all motors to their home position. Shortly after that the JETBEAM1 is ready for operation. To switch

o, disconnect the mains plug from the socket. For a more convenient operation it is recommended to

connect the unit to a socket which can be switched on and o via light switch.

3.2 BASIC

The control panel of JETBEAM1 has a display and 5 buttons for the complete programming and manage-

ment of the projector menu (g.4).

Fig.4 - Functions of the buttons

Enter

DOWN LEFT RIGHT ENTER

Increases the value

displayed or passes to

the previous item in a

Decreases the value

displayed or passes to

the next item in the

To enter in the main

menù or to return to the

top level

Commute from units,

tens, hundred in the

Conrms the displayed

value, or activates the

displayed function, or

enters the successive

Reversal of the display

To activate this function, hold simultaneously for 3 seconds UP and DOWN buttons while the display

is in the rest mode. This status will be memorised and maintained even for the next time it will be

switched on.

To return to the initial state, repeat the operation all over again.

JETBEAM1

3.3 USING THE MENU

1. Press the ENTER button to access the main menu.

2. Use the UP/DOWN button to select the menu to be used:

• Connect;

• Setup;

• Advanced;

• Information;

• Stand alone;

3. Press ENTER to display the rst item in the selected menu.

4. Use the UP/DOWN button to select the menu items.

NOTE - The display can be in one of two conditions: rest status and setting status. When it is in the rest sta-

tus, the display shows the projector’s DMX address. During menu setting status, after a wait time without

any key having been pressed, the display automatically returns to rest status.

It should be noted than when this condition occurs, any possible value that has been modied but not yet

conrmed with the ENTER button will be cancelled.

3.4 MENU STRUCTURE

1 CONNECT

DMX Address

Value (1-512)

DMX Mode

Basic 8-8CH

Basic 16-10CH

2 SET UP

Movement

Pan Reverse

YES/NO

Tilt Reverse

YES/NO

Pan Feedback

YES/NO

Tilt Feedback

YES/NO

Screen

Backlight

10s

20s

30s

Flip Display

YES/NO

Warn Cue

ON/OFF

Key Lock

ON/OFF

Auto Test

Manual Test

Pan

Pan Fine

Tilt

Tilt Fine

Pan/Tilt Speed

Dimmer

Shutter

Color

Prism

Value (000-255) for each function

3 ADVANCED

Reset

All

JETBEAM1

3.5 LINKING

Several units may be interconnected in order to control all further slave units to the same eect of the

master unit.

1. Connect the DMX OUT of the master unit via 3/5-pole XLR cable to the DMX IN of the rst slave unit.

2. Connect the DMX OUT of the rst slave unit to the DMX IN of the second slave unit, etc. until all units

are connected in a chain.

3.6 DMX ADDRESS

To enter the DMX mode, follow these steps:

• Press the ENTER button to access the main menu.

• Press the UP/DOWN button to scroll the menu, select the Connect icon, then press the ENTER button to

enter the next menu.

• Press the UP/DOWN button to scroll through the menu, select the Address and press the ENTER key.

• Press the arrow keys to select the desired value (001-512).

• Press the ENTER key to conrm the setting.

• Press the LEFT button repeatedly to exit the menu and save changes.

3.7 DMX CONFIGURATION

The JETBEAM1 has more DMX channel congurations which can be accessed from the control panel.

• Press the ENTER button to access the main menu.

Pan

Tilt

Color

Prism

Adjust

Pan Oset

Value (000-255) for each function

Tilt Oset

Color Oset

Prism Oset

Factory Reload

YES/NO

4 INFORMATION

Fixture Time

Temperature

Fans Speed

Software Ver.

UID

5 STAND ALONE

Play

Master/Slave

Master

Slave

Sequence

Show 1

Show 2

Show 3

Show 4

Mic Sens.

Value (000-100%)

JETBEAM1

• Press the UP/DOWN button to scroll the menu, select the Connect icon, then press the ENTER button to

enter the next menu.

• Press the UP/DOWN button to scroll through the menu, select DMX Mode and press the ENTER button to

enter the next menu.

• Press the UP/DOWN button to scroll through the menu, select the mode and press ENTER to conrm

your choice.

• Press the LEFT button repeatedly to exit the menu and save changes.

• The unit is equipped with 5-pole XLR connections.

3.8 DMX ADDRESSING

For operation via light control unit with DMX512 protocol, is sucient connect the controller to JET-

BEAM1. To able to operate the JETBEAM1 with a light controller, adjust the DMX start address for the rst a

DMX channel. If e. g. address 33 on the controller is provided for controlling the function of the rst DMX

channel, adjust the start address 33 on the JETBEAM1. The other functions of the light eect panel are

then automatically assigned to the following addresses.

An example with the start address 33 is shown below:

Number of

DMX channels

Start address

(example)

DMX Address

occupied

Next possible start

address for unit No. 1

Next possible start

address for unit No. 2

Next possible start

address for unit No. 3

19 33 33-52 53 72 91

21 33 33-54 55 76 97

28 33 33-61 62 90 118

29 33 33-62 63 92 121

Fig.6 - Example 21 DMX channels conguration

DMX Address: 96DMX Address: 54DMX Address: 33 DMX Address: 75

. . . . . . . . . . . .

DMX512 Controller

JETBEAM1

3.9 FIXTURE SETTINGS

You can change the parameters for the device by following these steps:

MOVEMENT

• Press the ENTER button to access the main menu.

• Press the UP/DOWN button to scroll the menu, select the Set Up icon, then press the ENTER button to

enter the next menu.

• Press the UP/DOWN button to scroll through the menu, then select Movement and press the ENTER but-

ton to enter the next menu.

• Use the UP/DOWN button to select the option proposed and press the ENTER button to conrm the

setting.

- Pan Reverse - Pan rotation in the opposite direction. Select NO to deactivate the function (normal set-

ting); YES to activate the function (Pan Reverse).

- Tilt Reverse - Used for reversing tilt movement. Select NO to deactivate the function (normal setting);

YES to activate the function (Tilt Reverse).

- Pan/Tilt Feedbacks - Reorganization Pan/Tilt position after rolling away. Select NO to deactivate or YES

to activate the function.

• Press the ENTER button to conrm your choice.

• Press the LEFT button repeatedly to exit the menu and save changes.

SCREEN

You can change the following parameters related to the display, following the same procedure:

• Press the ENTER button to access the main menu.

• Press the UP / DOWN keys to scroll the menu, select the Set Up icon, then press the ENTER button to

enter the next menu.

• Press UP / DOWN to scroll through the menu, then select Screen, and press the ENTER button to enter

the next menu.

• Press UP / DOWN to scroll through the menu, and then select one of the following settings for the dis-

play and press the ENTER key to display it.

- Back Light - Backlight display Auto O. This feature allows you to automatically turn o the backlight

after a specied time that you can set using the arrow buttons. To have the display always on select

Always On or choose another value to turn o the display after the amount of time you choose.

- Flip Display - Orientation of the display. This function allows you to rotate the display 180° to get a

better view of the display when the unit is hanging upside down. Select YES to activate or NO to dis-

able this function.

- Key Lock - Lock keys. With this function, you can lock the buttons on the control panel. If this function

is activated, the keys are automatically locked. To disable or temporarily disable the key lock func-

tion, press the buttons in the following order to regain access to menu commands: UP, DOWN, UP,

DOWN, RIGHT. Select YES to activate or NO to disable.

• Press the ENTER button to conrm your choice.

• Press the LEFT button repeatedly to exit the menu and save changes.

FIXTURE

Fans Mode - Select this function to set the fans operation mode:

• Press the ENTER button to access the main menu.

• Press the UP/DOWN button to scroll the menu, select the Set icon, then press the ENTER button to enter

the next menu.

• Press the UP/DOWN button to scroll through the menu, select UI Set, and press the ENTER button to

enter the next menu.

• Press the UP/DOWN button to scroll through the menu, and then select Fans Mode and press ENTER

JETBEAM1

to conrm.

• Press the UP/DOWN button to select Auto Speed/High Speed, press the ENTER button to conrm your

choice.

• Press the LEFT button repeatedly to exit the menu and save changes

Temperature - Select this function to set the temperature unit measurement shown on the display:

• Press the ENTER button to access the main menu.

• Press the UP/DOWN to scroll through the menu, select the Set icon, then press the ENTER button to

enter the next menu.

• Press the UP/DOWN to scroll through the menu, select UI Set, and press the ENTER button to enter the

next menu.

• Press the UP/DOWN button to scroll through the menu, select Temperature C/F and press ENTER to

conrm.

• Press the UP/DOWN button to select the unit of measure Celsius/Fahrenheit and press the ENTER but-

ton

• to conrm your choice.

• Press the LEFT button repeatedly to exit the menu and save changes.

• Auto and Manual test: with this menu, you can test all functions; with auto the moving head will start an

auto test, with manual you can choose each channel/function to test.

3.10 ADVANCED

Reset Functions

You can start a preset program to restore the selected function:

• Press the ENTER button to access the main menu.

• Press the UP/DOWN button to scroll the menu, select the Advanced icon, then press the ENTER button

to enter the next menu.

• Press the UP/DOWN button to scroll through the menu, select Reset and press the ENTER button to

enter the next menu.

• Press the UP/DOWN button to scroll through the menu, then select the function you wish to reset be-

tween All, Pan&Tilt, Colors, Prism.

• Press the ENTER button to conrm your choice and wait for the recovery of the selected function.

Adjust

Adjusts the lamp. This function allows you to modify all the parameters of the lamp: Pan Oset, Tilt Oset,

Color Oset, Prism Oset.

• Press the ENTER button to access the main menu.

• Press the UP/DOWN button to scroll the menu, select the Advanced icon, then press the ENTER button

to enter the next menu.

• Press the UP/DOWN button to scroll through the menu, select Adjust and press the ENTER button to

enter the next menu.

• Press the UP/DOWN button to select one of the parameters and press ENTER to edit the value (000-255)

through the UP/DOWN button.

• Press the ENTER button to conrm your choice and then press the MENU button repeatedly to exit the

menu and save changes.

Factory Reload

Select this function to reset the unit to factory settings:

• Press the ENTER button to access the main menu.

• Press the UP/DOWN button to scroll the menu, select the Advanced icon, then press the ENTER button

JETBEAM1

to enter the next menu.

• Press the UP/DOWN button to scroll through the menu, select Factory Reload and press the ENTER button

to enter the next menu.

• Press the UP/DOWN button to select YES or NO, then press the ENTER button to conrm.

3.11 FIXTURE INFORMATION

To view all the information on the device, proceed as follows:

• Press the ENTER button to access the main menu.

• Press the UP/DOWN button to scroll the menu, select the icon Information, then press the ENTER button

to enter the next menu.

• Press the UP/DOWN button to scroll through the menu, then select one of the following information

and press the ENTER button to display it.

- Fixture Time - Through the Fixture Time function you can display the operating time of the projector.

- Temperature - Through the Temperature function can be displayed the temperature inside the xture,

near the lamp. The temperature can be displayed in degrees Celsius or Fahrenheit.

- Fans Speed - Through the Fans Speed function you can show on display the fan speed present near the

lamp. Velocity is expressed in RPM (revolutions per minute).

- Software Version - Through Software Version function you can display the currently installed software

version.

- UID - This option shows the RDM identication number.

• Press the LEFT button repeatedly to exit the menu.

RDM

With this function you can call up various submenus via RDM. This device is RDM ready. RDM stands for

“Remote Device Management” and makes remote control of devices connected to the DMX-bus possible.

Manual settings like adjusting the DMX starting address are no longer needed. RDM is integrated in DMX

without inuencing the connections. The RDM-data is transmitted via the standard XLR-poles 1 and 2 so

new DMX-cables are not necessary. RDM ready and conventional DMX devices can be operated in one

DMX line. If DMX splitters are used and RDM control is to be used, these splitters must support RDM.

3.12 OPERATIONS IN AUTOMATIC MODE

The unit independently runs through its show. Before you send an automatic program you need to set the

drive as Master/Alone:

• Press the ENTER button to access the main menu.

• Press the UP/DOWN button to scroll the menu, select the Stand Alone icon, then press the ENTER button

to enter the next menu.

• Press the UP/DOWN button to scroll through the menu, select Play and press the ENTER button to enter

the next menu.

• Press the UP/DOWN button to scroll through the menu, select Sequence and press ENTER to conrm

your choice.

• Press the UP/DOWN button to select the mode of operation:

- Master, if the unit is connected in series with other units and it acts as the Master;

- Slave, if the unit is connected in series with other units and it acts as the Slave;

• Press the ENTER button to conrm your choice.

• Press the LEFT button repeatedly to exit the menu and save changes.

The unit will go into automatic mode by executing the program automatically.

3.13 SENSITIVITY MICROPHONE

Select this function to set the value of the sensitivity of the microphone for use with a music control:

• Press the ENTER button to access the main menu.

JETBEAM1

Fig.8

3.14 CONNECTION OF THE DMX LINE

DMX connection employs standard XLR connectors. Use shielded pair-twisted cables with 120Ω imped-

ance and low capacity.

The following diagram shows the connection mode:

ATTENTION - The screened parts of the cable (sleeve) must never be connected to the system’s earth, as

this would cause faulty xture and controller operation. Over long runs can be necessary to insert a DMX

level matching amplier. For those connections the use of balanced microphone cable is not recommended

because it cannot transmit control DMX data reliably.

• Connect the controller DMX input to the DMX output of the rst unit.

• Connect the DMX output to the DMX input of the following unit. Connect again the output to the input

of the following unit until all the units are connected in chain.

• When the signal cable has to run longer distance is recommended to insert a DMX termination on the

last unit.

3.15 CONSTRUCTION OF THE DMX TERMINATION

The termination avoids the risk of DMX 512 signals being reected back along the cable when they reach-

es the end of the line: under certain conditions and with certain cable lengths, this could cause them to

cancel the original signals. The termination is prepared by soldering a 120Ω 1/4 W resistor between pins 2

and 3 of the 5-pin male XLR connector, as shown in gure.

Fig.7

DMX - OUTPUT

XLR socket

DMX - INPUT

XLR plug

Pin1 : GND - Shield

Pin2 : - Negative

Pin3 : + Positive

Pin4 : N/C

Pin5 : N/C

Example:

3 pin XLR connector

• Press the UP/DOWN button to scroll the menu, select the Stand Alone icon, then press the ENTER button

to enter the next menu.

• Press the UP/DOWN button to scroll through the menu, select Play, and press the ENTER button to enter

the next menu.

• Press the UP/DOWN button to scroll through the menu, then select Mic Sens. and press ENTER to conrm.

• Press the UP/DOWN button to adjust the level of sensitivity of the microphone, and then press the

ENTER button to conrm your choice.

• Press the LEFT button repeatedly to exit the menu and save changes.

JETBEAM1

3.16 DMX CONTROL

BAS-8 BAS-16

FUNCTION

DMX

Value

8 ch 10 ch

1 1

PAN

Pan Coarse 000 - 255

PAN FINE

Pan Fine 000 - 255

2 3

TILT

Tilt Coarse 000 - 255

TILT FINE

Til Fine 000 - 255

3 5

MOVEMENT SPEED

Fastest to slowest 000 - 255

4 6

SHUTTER

Shutter closed

No function (shutter open)

Strobe eect slow to fast

No function (shutter open)

Pulse-eect in sequences

No function (shutter open)

Random strobe eect slow to fast

No function (shutter open)

000 - 010

011 - 030

031 - 085

086 - 105

106 - 160

161 - 180

181 - 235

236 - 255

5 7

DIMMER

Dimmer (close to open) 000 - 255

6 8

COLOR

Indexed

Open

Open+DARK RED

DARK RED

DARK RED + DARK BLUE

DARK BLUE

DARK BLUE + YELLOW

YELLOW

YELLOW + GREEN

GREEN

GREEN + LIGHT ORANGE

LIGHT ORANGE

LIGHT ORANGE + MAGENTA

MAGENTA

MAGENTA + CYAN

CYAN

CYAN + C.T.O.

C.T.O.

C.T.O. + JADE

JADE

JADE + C.T.B

000 - 004

005 - 008

009 - 012

013 - 016

017 - 021

022 - 025

026 - 029

030 - 033

034 - 038

039 - 042

043 - 046

047 - 050

051 - 055

056 - 059

060 - 063

064 - 067

068 - 071

072 - 076

077 - 080

081 - 084

JETBEAM1

BAS-8 BAS-16

FUNCTION

DMX

Value

8 ch 10 ch

6 8

C.T.B

C.T.B + PINK

PINK

PINK + LIGHT GREEN

LIGHT GREEN

LIGHT GREEN + DARK ORANGE

DARK ORANGE

DARK ORANGE + UV FILTER

UV FILTER

UV FILTER + Open

Forward Spin

Stop to fast

Stop roation

Stop

Reverse Spin

Fast to Stop

085 - 088

089 - 093

094 - 097

098 - 101

102 - 105

106 - 110

111 - 114

115 - 118

119 - 122

123 - 127

128 - 189

190 - 193

194 - 255

7 9

PRISM ROT

Open

Indexing

Insertion and positioning from 0-360 degrees

Forward Spin

Stop to fastest

Reverse Spin

fastest to stop

000 - 005

006 - 191

192 - 223

224 - 255

8 10

CONTROL

No function

Enable blackout while Pan/Tilt move (Hold 3 Second)

Disable blackout while Pan/Tilt move (Hold 3 Second)

Enable blackout while color change (Hold 3 Second)

Disable blackout while color change (Hold 3 Second)

Pan Reset (Hold 3 Second)

Tilt Reset (Hold 3 Second)

Color Reset (Hold 3 Second)

Prism Reset (Hold 3 Second)

No function

Reset all (Hold 3 Second)

No function

000 - 039

040 - 049

050 - 059

060 - 069

070 - 079

080 - 089

090 - 099

100 - 109

110 - 119

120 - 199

200 - 209

210 - 255

JETBEAM1

3.17 COLOR

1 - RED

2 - BLUE 3 - YELLOW 4 - GREEN

5 - LIGHT ORANGE

6 - MAGENTA 7 - CYAN

8 - CTO

9 - JADE

10 - CTB 11 - PINK

12 - LIGHT GREEN

13 - DARK ORANGE 14 - UV FILTER

COLOR WHEEL

JETBEAM1

Fig.9

- 4 - MAINTENANCE

4.1 MAINTENANCE AND CLEANING THE UNIT

• Make sure the area below the installation place is free from unwanted persons during setup.

• Switch o the unit, unplug the main cable and wait until the unit has cooled down.

• All screws used for installing the device and any of its parts should be tightly fastened and should not

be corroded.

• Housings, xations and installation spots (ceiling, trusses, suspensions) should be totally free from any

deformation.

• When the lens is visibly damaged due to cracks or deep scratches, it must be replaced.

• The main cables must be in impeccable condition and should be replaced immediately even when a

small problem is detected.

• In order to protect the device from overheating the cooling fans (if any), and ventilation openings

should be cleaned monthly.

To ensure optimal operation and performance for a long time it is essential to periodically clean the parts

subject to dust and grease deposits. The frequency with which the following operations are to be carried

out depends on various factors, such as the amount of the eects and the quality of the working environ-

ment (air humidity, presence of dust, salinity, etc.). Use a soft cloth dampened with any detergent liquid

for cleaning glass to remove the dirt from the reectors, from the lenses and lters.

It is recommended that the projector undergoes an annual service by a qualied technician for special

maintenance involving at least the following operations:

- General cleaning of internal parts..

- Restoring lubrication of all parts subject to friction, using lubricants specically.

- General visual check of the internal components, cabling, mechanical parts, etc.

- Electrical, photometric and functional checks; eventual repairs.

Warning: we strongly recommend internal cleaning to be carried out by qualied personnel!

4.2 FUSE REPLACEMENT

1. Disconnect this product from the power outlet.

2. Using a screwdriver, unscrew the fuse holder cap from the housing.

3. Remove the blown fuse and replace with a good fuse of the same type and rating.

4. Screw the fuse holder cap back in place and reconnect power.

La pagina sta caricando ...

ProLights 14 W sharp and compact moving beam Manuale utente

Marca: ProLights

Modello: 14 W sharp and compact moving beam

Categoria: Proiettori

Tipo: Manuale utente

Scarica il pdf

rapporto

in altre lingue

English: ProLights 14 W sharp and compact moving beam User manual

ProLights 14 W sharp and compact moving beam Manuale utente

ProLights 14 W sharp and compact moving beam Manuale utente

in altre lingue

Documenti correlati

Altri documenti