PURE EVOKE F3 Manuale del proprietario

Marca: PURE

Modello: EVOKE F3

Tipo: Manuale del proprietario

F3 with Bluetooth

Evoke

Chalk-V3-Euro.indb 1 9/23/2015 12:35:40 PM

Chalk-V3-Euro.indb 2 9/23/2015 12:35:40 PM

DA/NO

Thank you for choosing Evoke F3 with Bluetooth. This

manual will get you up and running in no time, and explains

how to make the most of your Evoke. We’re constantly

improving and adding new features to our products. To

take advantage of any enhancements made since your

product was shipped, please visit support-uk.pure.com

where you can download the latest version of this user

guide in PDF format.

Evoke F3 with Bluetooth

Chalk-V3-Euro.indb 1 9/23/2015 12:35:40 PM

Safety information

1. Familiarise yourself with all of the safety information and instructions before using the radio. When passing

this radio on to others, please include all documents.

2. Always protect the radio against moisture and humidity. Do not put this radio in water or any other liquid

as this can cause serious damage. If liquid or water is spilled on to the radio, switch it off at the mains

immediately, disconnect the mains plug and contact your dealer.

3. Using the radio in rooms or climates with high humidity and temperatures may cause condensation to form

inside the radio, which can damage the radio.

4. Using the radio in dusty conditions may cause damage to the interior electronic components, which may

lead to the radio malfunctioning.

5. The radio must be placed on a flat table surface and should not be subjected to vibrations.

6. To reduce the risk of electric shock, do not remove any screws as there are no user-serviceable parts

inside. Refer servicing to qualified personnel.

7. Avoid extreme degrees of temperature,either hot or cold. Place the device well away from heat sources

such as radiators or gas/electric fires.

8. Fit the mains adaptor to an easily accessible socket located near the radio and ONLY use the mains power

adapter supplied.

9. Never touch the plug or the radio itself with wet hands. Never pull the power cable when disconnecting the

power adaptor from the power supply.

10. Ensure that the available supply voltage corresponds with the required operational voltage of the radio

before use.

11. Disconnect your radio from the power supply if you will not use your radio for a long period of time (e.g. if

you are going on holiday).

12. Always unplug your radio from the mains socket before cleaning.

13. When cleaning the radio, do not use any type of abrasive pad or abrasive cleaning solutions as these may

damage the radio’s surface.

We do not recommended listening to your radio with headphones or ear phones via the 3.5mm Line Out

socket. If you decide to use headphones or earphones, the excessive sound pressure or volume may

damage your hearing. Always adjust the volume to a level that is pleasant and not too loud. If the volume

of your radio is too high when listening via your headphones or earphones for an extended period it can

damage your hearing.

Chalk-V3-Euro.indb 2 9/23/2015 12:35:40 PM

Contents

4 Introduction

4 Network requirements

4 What’s in the box?

4 Front panel controls

5 Front and rear panels

6 Remote control

7 Display

8 Getting started

8 Quick set up

9 Internet listening

9 Listening to internet content

9 Station list

10 Streaming audio to Evoke

10 Streaming using Bluetooth

11 Streaming from Spotify

11 Streaming audio from a PC or Mac

12 Listening to digital or FM radio

12 Changing digital stations

12 Changing FM stations

12 Storing a preset

12 Listening to a preset

13 Setting alarms and timers

13 Setting an alarm

13 Setting the sleep timer

13 Cancelling a sounding or snoozing alarm

13 Snoozing a sounding alarm

14 Controlling Evoke from your smartphone or tablet

15 Options and settings

15 Network settings

16 Speciﬁcations

Chalk-V3-Euro.indb 3 9/23/2015 12:35:40 PM

Introduction

Network requirements

To enjoy using all of Evoke’s features, you will need:

• A wireless access point, router or similar network device (802.11a/b/g/n) that is connected to a

broadband internet connection.

• A PC, tablet or smartphone, etc connected to the same Wi-Fi as your Evoke.

What’s in the box?

You’ll find the following items in Evoke’s box:

• Evoke F3 with Bluetooth

• Remote control

• Power adaptor

• Instruction manual

• Spotify flyer

Note: Retain all packaging after removing Evoke and the accessories from the box. If you decide to

dispose the packaging, please do so according to local regulations.

Front panel controls

No. Description Function

1 Standby Press to switch Evoke between on and standby.

2 Information Press to display information about the content that is currently

playing.

3 Back Press to return to the previous menu.

4 Source Press to switch source.

5 Menu Press to access the settings menu.

6 Preset If listening to an internet, digital or FM radio station, press to save

the radio station as a preset.

7 Volume/Select Turn and press to select menu options. If listening to content,

turn to adjust the volume.

Chalk-V3-Euro.indb 4 9/23/2015 12:35:40 PM

Front and rear panels

No. Description Function

1 2.4" TFT screen Colour display.

2 Remote receiver Receives infrared signals from the remote control.

3 Front panel controls Used to control Evoke’s functions (see previous page for

more information).

4 Aux in 3.5mm auxiliary input connection for an iPod, MP3 player, etc.

5 Line out 3.5mm output connector for external amplifier/hi-fi system.

6 DC in 12V DC input connection for supplied mains adapter.

AUX IN LINE OUT

Model Evoke F340BT 106KL

Input: 12V DC 0.8A

Evoke F3

with Bluetooth

4 5 6

Chalk-V3-Euro.indb 5 9/23/2015 12:35:41 PM

Remote control

5 6

12 13

No. Description Function

1 Standby Press to switch Evoke between on and standby

2 Mute Press to mute the volume.

3 Navigation controls Used to navigate Evoke’s menus. If listening to digital or FM

radio, press the / buttons to change radio station.

4 Volume Press to turn the volume up or down.

5 Source Press to switch source or access the settings menu.

6 Presets/Bluetooth If listening to an internet, digital or FM radio station, press to save

the radio station as a preset. If in Bluetooth mode, press to

switch Evoke in or out of Bluetooth pairing mode.

7 Menu Press to access the settings menu.

8 Playback controls Press to control playback when listening to content from the

music player.

9 Sleep/Snooze Press to set the sleep timer. If an alarm is sounding, press to

snooze the alarm.

10 Shuffle/Repeat Press to shuffle or repeat the track that is currently playing.

11 Number Press to recall a preset. Press and hold to store a preset to the

respective number.

12 Equaliser Press to open the equaliser menu.

13 Information Press to display information about the content that is currently

playing.

Chalk-V3-Euro.indb 6 9/23/2015 12:35:41 PM

Display

Source menu

Press the Source button to display the ‘Source’ menu. Turn and press the Select dial to switch between

Evoke’s sources.

Description Function

Internet Radio Listen to an internet radio station or podcast.

Spotify Listen to Spotify (see page 11).

Music Player Listen to tracks from your computer.

DAB Radio Listen to a digital radio station.

FM Radio Listen to an FM radio station.

Bluetooth Listen to content streamed from your phone or tablet.

Aux In Listen to content from a device connected to your Aux in connection.

Chalk-V3-Euro.indb 7 9/23/2015 12:35:41 PM

• Unclip the aerial and fully extend it (steps A and B).

• Insert the jack of the supplied mains adapter into the socket on the rear of the radio (C).

• Plug the mains adapter into the mains supply (D).

Getting started

Quick set up

AUX IN LINE OUT

Model Evoke F340BT

Input: 12V DC

Evoke F3

with Bluetooth

AUX IN LINE OUT

Model Evoke F340BT

Input: 12V DC

Evoke F3

with Bluetooth

Stereo OutAux Speaker

12V DC

Press the Standby button to switch Evoke on.

The first time you switch on Evoke you will be asked if you would like to run the setup wizard,

which will help you connect Evoke to your Wi-Fi. If you want to run the setup wizard now, turn and

press the Select dial to select ‘Yes’ and follow the prompts on screen. To set up Evoke later, turn

and press the Select dial to select ‘No’.

Note: For more information on using the setup wizard see page 15.

Setup wizard

Start now?

YES

Chalk-V3-Euro.indb 8 9/23/2015 12:35:42 PM

Internet listening

You can connect Evoke to your Wi-Fi to access to thousands of internet radio stations and podcasts from

around the world. Once connected to the internet you can also access additional subscription services

such as Spotify, which provides you with instant access to millions of music tracks. We’re constantly

improving and adding new features to our internet service. To ﬁnd out more about the latest enhancements

made since your product was shipped, please visit support-uk.pure.com.

Listening to internet content

Internet radio menu

Internet radio

Last listened

Station list

System settings

Main menu

Thousands of radio stations around the world broadcast online. To

listen:

1. Press the Source button to display the ‘Source’ menu.

2. Turn and press the Select dial to select ‘

Internet radio

’.

3. Turn and press the Select dial to select one of the following options:

Last listened: Select this option to tune Evoke into the last station you

were listening to.

Station list: Select this option to see a list of currently available

Internet stations or listen to podcasts (see ‘Station list’ below for

more information).

System settings: Select this option to change Evoke’s settings

(download our full user guide on support-uk.pure.com for more

information).

Main menu: Select this option to view Evoke’s main menu.

Station list

You can listen to a range of radio stations as well as Podcasts from the ‘Station list’ menu. Turn and press

the Select dial to select one of the following options:

My favourites

Select this option to start listening to an internet radio station that you added to your favourites list.

Local United Kingdom

Select this option to browse for an internet radio station based in your country. Turn and press the Select

dial to select ‘All stations’ to view all local based stations in alphabetical order. To browse for a station based

on genre, turn and press the Select dial to select the genre you want to browse for.

BBC

Select this option to browse for a BBC radio station.

Stations

Select this option to browse for any internet radio station. Turn and press the Select dial to browse for a

station based on the ‘Location’ or ‘Genre’.

Searching for a station

Select this option to search for an internet radio station. Turn and press the Select dial to highlight and

select characters. Select ‘BKSP’ to delete a character. Turn and press the Select dial to start searching for

an internet station. To cancel your search, turn and press the Select dial to select ‘CANCEL’.

Podcasts

Podcasts are prerecorded audio shows on a wide variety of subjects such as comedy, arts, business, and

culture, for you to enjoy anytime. Turn and press the Select dial to browse for a podcast based on the

‘Location’ or ‘Genre’.

My added stations

Select this option to start listening to any internet radio stations that you manually added.

Help

Select this option to view some frequently asked questions relating to internet radio.

Chalk-V3-Euro.indb 9 9/23/2015 12:35:42 PM

Streaming using Bluetooth

You can use Bluetooth to stream any audio from your phone or tablet to Evoke.

Pairing a mobile device with Evoke

Before you can stream audio to Evoke, you will need to pair your phone or tablet with Evoke.

Note: Bluetooth pairing varies on different mobile devices. See your mobile device manual for speciﬁc

information.

To pair with Evoke using Bluetooth:

1. Press the

Source

button and turn and press the

Select

dial to select ‘

Bluetooth

’. Evoke will display the

Bluetooth input display and the Bluetooth icon (

) will start to ﬂash.

Note: If the Bluetooth icon is displayed, Evoke is already connected to another Bluetooth device. See below

for more information.

2. On your mobile device, select the option to add a new Bluetooth device. On some mobile devices you may

need to select the search or scan option.

3. Start the pairing process on your mobile device. Do this by selecting ‘Evoke F3 BT’ from the list of available

devices that appear on the mobile device’s screen. Your mobile device will connect to Evoke automatically

once paired.

You will now be able to start streaming audio to Evoke from your mobile device.

Disconnecting a mobile device from Evoke

You can only have one mobile device connected to Evoke via Bluetooth at any one time. If you want to stream

audio from a different mobile device, you will need to disconnect any mobile device that is currently connected

to Evoke via Bluetooth ﬁrst.

To disconnect a mobile device from Evoke:

1. Press the

button and turn and press the

Select

dial to select ‘

BT disconnect

’.

2. T

urn and press the Select dial to select ‘Yes’ to disconnect your mobile device from Evoke.

If your mobile device goes out of Evoke’s Bluetooth range (this is usually around 10m (30ft)) the mobile device’s

Bluetooth connection is disconnected automatically. To manually disconnect your mobile device from Evoke,

you will need to open the Bluetooth settings on your mobile device (see your mobile device’s manual for more

information).

When you disconnect a mobile device from Evoke, Evoke will remain in the ‘

Bluetooth

’ source. To listen to

another source, e.g. digital radio, press the Source button to display the home menu and turn and press the

Select dial to choose the source you want to listen to.

Streaming audio to Evoke

Chalk-V3-Euro.indb 10 9/23/2015 12:35:42 PM

Streaming from Spotify

Press the Source button and turn and press the Select dial to select ‘Spotify’ from the Home screen.

Spotify Connect

A better way to listen at home

Spotify Connect lets you play Spotify through your home speakers or TV, using the Spotify app as a

remote.

You’ll need a Spotify Premium account to use Spotify Connect. If you don’t have it, just go to

http://www.spotify.com/freetrial for your free trial.

Step 1.

Connect your device to the same Wi-Fi network as your phone, tablet or PC running the Spotify

app.

Step 2. Open the Spotify app, and play any song.

Step 3. Tap the song image in the bottom left of the screen.

Step 4. Tap the Connect icon

Step 5. Pick your [device] from the list.

For more information on how to set up and use Spotify Connect please visit www.spotify.com/connect.

Licenses

The Spotify Software is subject to third party licenses found here:

http://www.spotify.com/connect/third-party-licenses

For more information on how to setup and use Spotify Connect please visit www.spotify.com/connect.

Streaming audio from a PC or Mac

You can stream audio stored on your computer or on a UPnP-compatible Network Attached Storage

(NAS) device to Evoke. To stream music from your computer you will need to install media server

software on it. To find out more about setting up your computer so that it can stream audio to your PC or

Mac, download our full user guide from support-uk.pure.com.

Chalk-V3-Euro.indb 11 9/23/2015 12:35:43 PM

Listening to digital or FM radio

Digital radio screen

Changing digital radio station

Changing digital stations

1. Press the Source button and turn and press the Select dial to

select ‘DAB radio’ from the Home screen. The first time you select

DAB radio, Evoke will perform an autotune to find all available

stations and will tune into one when finished.

2. Press the Menu button and turn and press the Select dial to

select ‘Station list’.

3. Turn the Select dial left or right to browse through the list of

available digital stations.

4. Press the Select dial to change the station.

Changing FM stations

Seek tuning

1. Press the Source button and turn and press the Select dial to

select ‘FM radio’ from the Home screen.

2. Press the Select dial to seek to the next FM radio station that has

a strong signal.

Manual tuning

1. Press the Source button and turn and press the Select dial to

select ‘FM radio’ from the Home screen.

2. Press and hold the Select button to enter manual tuning mode.

3. Turn the Select dial to step up or down 0.05 MHz.

Storing a preset

1. Tune to the station you want to store as a preset.

Press and hold the Preset button on Evoke or on the remote

control to view the preset list.

Turn and press the Select dial to store the radio station to one of

the available preset slots.

Listening to a preset

1. Press the Preset button to display the preset list.

Turn and press the Select dial to select the preset that you want

to listen to.

Selecting a preset

DAB 10:05

BBC Radio 6Music

to vote for a track

that missed out on

the 6Music playlist

Recall from Preset

1. BBC Radio 1

2. BBC Radio 2

3. Absolute radio

4. [Not set]

5. [Not set]

Station list

BBC Radio 1

BBC Radio 2

BBC Radio 3

BBC Radio 4

BBC Radio 5

Chalk-V3-Euro.indb 12 9/23/2015 12:35:43 PM

Evoke has two alarms and a sleep timer.

Setting an alarm

1. Press the Menu button and turn and press the Select dial to select ‘Main Menu’.

2. Turn and press the Select dial to select ‘Alarms’.

3. From the ‘Alarms’ menu, turn and press the Select dial to select either ‘Alarm 1’ or ‘Alarm 2’.

4. Turn and press the Select dial to select ‘Enable’.

5. Turn the Select dial to adjust the frequency and press to conﬁrm.

6. Select ‘Time’ by turning a pressing the Select dial, and turn the dial to adjust the hours, minutes and

AM or PM, pressing to conﬁrm each section.

7. Turn and press the Select dial to select ‘Mode’. Turn and press the Select dial to choose between

‘Buzzer’, ‘Internet’, ‘DAB’ or ‘FM’, then press the Select dial to conﬁrm.

8. If you’ve chosen ‘Internet’, ‘DAB’ or ‘FM’ radio, turn and press the Select dial to select ‘Preset’, To play

the station you last listened to, turn and press the Select dial to select ‘Last listened’ or turn and press

the Select dial to choose a radio station from the preset list.

Note: Skip this step of you are setting a Tone alarm.

9. Turn and press the Select dial to select the ‘Volume’. Turn and press the Select the dial to set the

volume of the alarm.

10. Turn and press the Select dial to select ‘Save’ to save your alarm.

Note: You can also set the alarm by using the navigation control buttons on your remote. See page 6

for more information.

Setting the sleep timer

1. Press the Menu button and turn and press the Select dial to select ‘Main menu’.

2. Turn and press the Select dial to select ‘Sleep’.

3. Turn and press the Select dial to adjust the length of the sleep timer from 15 minutes to 1 hour in 15

minute steps.

Cancelling a sounding or snoozing alarm

Press Standby to cancel any sounding alarm.

Snoozing a sounding alarm

To snooze a sounding alarm, press any button apart from Standby to display the snooze screen. To

adjust the amount of time the alarm will be snoozed by, press any button apart from Standby to adjust

the snooze time in 5 minute intervals up to 15 minutes, and then 30 minutes.

Setting alarms and timers

Chalk-V3-Euro.indb 13 9/23/2015 12:35:43 PM

Controlling Evoke from your smartphone

or tablet

Opening the Pure Select app for the first time

You will be asked to select the device that you want to stream to when you first open the app. Select

Evoke from the list of devices that are displayed on the app’s screen. If you’ve already installed the app,

select Evoke from the drop-down menu at the top of the screen.

Finding your way around the Pure Select app

The Pure Select app has three main views, which you can select by tapping the tabs at the top of the

app’s screen:

SOURCE: Tap to switch between Evoke’s sources.

NOW PLAYING: Tap to view and control the content that is currently playing on Evoke. See ‘Pure Select

app controls’ below for more information.

BROWSE: Tap to browse for an internet radio station or podcast.

Pure Select app controls

You can switch between sources, browse content and control the volume on Evoke on your smartphone

or tablet by downloading the Pure Select app. You can download the Pure Select app on your

smartphone or tablet from the Apple App Store or Google Play. To find out more about using the Pure

Select app, see the help supplied with the app.

Note: Your smartphone or tablet will need to be on the same Wi-Fi network as Evoke.

EVOKE_F3

4 5

Now playing screen in the

Pure Select app

Key:

BKSP

CANCEL

0 1 2 3 4 5 6

7 8 9 . _ - @

, a b c d e

f g h i j k l

m n o p q r s

1. Tap to tune into one of your favourite

internet stations.

2. Tap to shufﬂe the shufﬂe the track that

is currently playing when listening to a

playlist.

3. Displays any artwork associated with the

radio station or music playing.

4. Tap to share what you are listening to

with your friends on various social media,

including Facebook and Twitter.

5. Tap to repeat the current track that

is playing.

6. When playing music, displays

information about the artist and album.

When listening to a radio station displays.

information about the radio show.

7. Playback controls.

8. Volume controls.

Tap to mute Evoke’s volume.

Slide bar to adjust Evoke’s volume.

Chalk-V3-Euro.indb 14 9/23/2015 12:35:44 PM

Connecting Evoke to your Wi-Fi using the setup wizard

1. Press the Menu button to view the main menu.

Turn and press the Select dial to select ‘System settings’ >

‘Network’ > ‘Network wizard’.

3. Turn and press the Select dial to select your region. Evoke will

search for available Wi-Fi networks.

Turn and press the Select dial to select the name (SSID) of your

Wi-Fi network. If your network requires a key, follow steps 5-6.

5. Enter your network key or password by turning and pressing the

Select dial to highlight and select characters. If you want to delete

the last character, turn the Select dial to select ‘BKSP’ and push

to conﬁrm.

Turn and press the Select dial to select ‘OK’. Evoke will connect to

your network.

Helpful hint: Your Wi-Fi key is case sensitive, make sure to enter it

exactly as shown.

Main menu

Bluetooth

Aux in

Sleep

Alarms

System settings >

SSID

Pure_Wi-Fi

Home-Hub

Rob-Wireless

Key:

BKSP

CANCEL

0 1 2 3 4 5 6

7 8 9 . _ - @

, a b c d e

f g h i j k l

m n o p q r s

Network settings

Evoke can be connected to your network using a Wi-Fi connection.

Options and settings

Press the Menu button on Evoke or on the remote control to access the Settings menu. To find out about

all available options, download our full user guide from support-uk.pure.com.

Chalk-V3-Euro.indb 15 9/23/2015 12:35:45 PM

Radio Digital (DAB/DAB+), FM and internet radio (via Wi-Fi).

Frequencies Digital Band III 174–240 MHz,

FM 87.5-108 MHz (with RDS).

Display 2.4", 320 x 240, TFT colour display.

Network Wi-Fi: 802.11a, 802.11b and 802.11g supported with WEP and WPA/WPA2 encryption,

WPS.

2.412 GHz ~ 2.472 GHz (channels 1 to 13).

0.5 MB broadband speed recommended.

Bluetooth

Media streaming Audio codecs supported include WMA, AAC, MP3, FLAC.

Media streaming requires UPnP server/DLNA

Speaker

3.5" full range driver, 5W output

Input connectors 12 V DC power adapter socket (adapter supplied). 3.5mm Line-in for auxiliary devices

Output connectors 3.5mm stereo line out socket

Mains power adapter 12 V DC, 800 mA

Power consumption Standby mode: <1 W.

Dimensions 195mm wide x 118mm deep x 110mm high

Weight 1.08kg

Warranty Comprehensive three year warranty.

Approvals

CE marked. Hereby, Pure, declares that this Band II LPD device is in compliance with the

essential requirements and other relevant provisions of Directive 1999/5/EC. The Declaration

of Conformity may be consulted at http://www.pure.com/about/r-tte-doc.

ETSI EN 300 401 compliant.

Speciﬁcations

Warranty information

Imagination Technologies Limited warrants to the end user that this product will be free from defects in

materials and workmanship in the course of normal use for a period of three years from the date of purchase.

This guarantee covers breakdowns due to manufacturing or design faults; it does not apply in cases such

as accidental damage, however caused, wear and tear, negligence, adjustment, modification or repair not

authorised by us. Should you have a problem with your unit please contact your supplier or contact Pure

Support at http://support-uk.pure.com

Disclaimer

Imagination Technologies Limited makes no representation or warranties with respect to the content of this

document and speciﬁcally disclaims any implied warranties of merchantability or ﬁtness for any particular purpose.

Further, Imagination Technologies Limited reserves the right to revise this publication and to make changes in it

from time to time without obligation of Imagination Technologies Limited to notify any person or organization of

such revisions or changes.

Trademarks

Evoke F3 with Bluetooth, Pure, the Pure logo, Imagination Technologies, and the Imagination Technologies logo

are trademarks or registered trademarks of Imagination Technologies Limited.

distributed, transmitted, transcribed, stored in a retrieval system, or translated into any human or computer language,

in any form or by any means, electronic, mechanical, magnetic, manual or otherwise, or disclosed to third parties

without the express written permission of Imagination Technologies Limited. Version 3 September 2015.

Correct disposal of this product

This marking indicates that this product should not be disposed with other household waste throughout

the EU. To prevent possible harm to the environment or human health from uncontrolled waste

disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your

used device, please use the return and collection system or contact the retailer where the product was

purchased. They can take this product for environmental safe recycling.

Chalk-V3-Euro.indb 16 9/23/2015 12:35:45 PM

DA/NO

Vielen Dank, dass Sie sich für das Evoke F3 mit Bluetooth

entschieden haben. Mit diesem Handbuch ist das Gerät

in kürzester Zeit betriebsbereit. Lesen Sie hier, wie Sie

das Evoke optimal nutzen können. Wir arbeiten ständig

daran, unsere Produkte weiter zu verbessern und neue

Funktionen zu erweitern. Um die vielen Erweiterungen

zu nutzen, die seit der Auslieferung Ihres Geräts

vorgenommen wurden, besuchen Sie bitte unsere Website

support-uk.pure.com. Hier können Sie die neueste Version

dieses Benutzerhandbuchs im PDF-Format herunterladen.

Evoke F3 mit Bluetooth

Chalk-V3-Euro.indb 1 9/23/2015 12:35:45 PM

9/23/2015 12:35:45 PM

Informationen zur Sicherheit

1. Machen Sie sich vor der Nutzung des Radios mit allen Sicherheitsinformationen- und anweisungen

vertraut. Wenn Sie dieses Radio an andere Personen weitergeben, reichen Sie bitte auch alle Dokumente

weiter.

2. Schützen Sie das Radio stets vor Feuchtigkeit und Nässe.Tauchen Sie das Radio nicht in Wasser oder

andere Flüssigkeiten, da dies schwere Schäden verursachen kann. Wenn Wasser oder eine andere

Flüssigkeit auf dem Radio verschüttet wird, schalten Sie sofort den Hauptschalter aus, trennen Sie das

Gerät vom Netz und kontaktieren Sie Ihren Händler.

3. Bei der Nutzung des Radios in Räumen oder Klimaumgebungen mit hoher Luftfeuchtigkeit und hohen

Temperaturen kann sich Kondensation im Inneren des Radios bilden und Schäden verursachen.

4. Die Nutzung des Radios in staubiger Umgebung kann Schäden an den elektronischen Bauteilen

verursachen und zu Funktionsstörungen führen.

5. Das Radio muss auf einer flachen Oberfläche stehen und sollte keinen Vibrationen ausgesetzt sein.

6. Um das Risiko eines Stromschlags zu vermeiden, entfernen Sie keine Schrauben. Im Radio befinden

sich keine vom Benutzer wartbaren Teile. Reparaturarbeiten müssen von qualifizierten Fachkräften

durchgeführt werden.

7. Vermeiden Sie extrem hohe oder tiefe Temperaturen. Halten Sie das Gerät fern von Wärmequellen wie

Heizungen und Gas- oder Elektroheizstrahlern.

8. Stecken Sie den Netzadapter in eine gut erreichbare Steckdose in der Nähe des Radios, und verwenden

Sie AUSSCHLIESSLICH den mitgelieferten Netzadapter.

9. Fassen Sie niemals den Stecker oder das Radio mit nassen Händen an. Ziehen Sie niemals am Netzkabel,

wenn Sie den Netzadapter von der Stromversorgung trennen.

10. Vergewissern Sie sich vor der Nutzung des Radios, dass die verfügbare Netzspannung der erforderlichen

Betriebsspannung des Geräts entspricht.

11. Trennen Sie Ihr Radio von der Stromversorgung, wenn Sie es für längere Zeit nicht benutzen (z. B. wenn

Sie in den Urlaub fahren).

12. Ziehen Sie immer den Netzstecker des Radios aus der Steckdose, bevor Sie das Gerät reinigen.

13. Verwenden Sie für die Reinigung des Radios keine Scheuerpads- oder Scheuermittel, da diese die

Geräteoberfläche beschädigen könnten.

Die Nutzung des Radios über den 3,5 mm-Klinkenanschluss mit Kopf- oder Ohrhörern wird nicht

empfohlen. Wenn Sie sich für die Verwendung von Kopf- oder Ohrhörern entscheiden, kann der

übermäßige Schalldruck bzw. die Lautstärke Ihr Gehör schädigen.Stellen Sie die Lautstärke immer auf

ein angenehmes, nicht zu lautes Niveau ein.Ist die Lautstärke Ihres Radios beim Hören mit Ihren Kopf-

oder Ohrhörern über einen längeren Zeitraum zu hoch eingestellt, kann dies Ihr Gehör schädigen.

Chalk-V3-Euro.indb 2 9/23/2015 12:35:45 PM

La pagina sta caricando ...

PURE EVOKE F3 Manuale del proprietario

Marca: PURE

Modello: EVOKE F3

Tipo: Manuale del proprietario

Scarica il pdf

rapporto

in altre lingue

English: PURE EVOKE F3 Owner's manual
français: PURE EVOKE F3 Le manuel du propriétaire
español: PURE EVOKE F3 El manual del propietario
Deutsch: PURE EVOKE F3 Bedienungsanleitung
Nederlands: PURE EVOKE F3 de handleiding
dansk: PURE EVOKE F3 Brugervejledning

PURE EVOKE F3 Manuale del proprietario

PURE EVOKE F3 Manuale del proprietario

in altre lingue

Documenti correlati

Altri documenti