Analog way PLS300 Manuale utente

version 4.00

USER MANUAL

Pulse

THANK YOU

Thank you for choosing Analog Way. By following these simple steps, you should be able to operate the

powerful PLS300.

TABLE OF CONTENTS

1

INTRODUCTION

4

1-1. PLS300 OPERATING MODE

1-2. USEFUL TERMS AND DEFINITIONS

4

5

HARDWARE INSTALLATION

2-1. SAFETY INSTRUCTION

2-2. UNPACKING AND INSPECTION

2-3. RACKMOUNT INFORMATION

2-4. CABLE & ADAPTOR INFORMATION

2-5. HARDWARE SPECIFICATIONS

5

10

11

Input specications

Output specications

Communication specications

Environmental specications

Pin outs

HDCP compliance

3-1. CONNECTING THE PLS300

3-2. THE PLS300 REAR PANEL

18

19

Overview

Universal Inputs #1 to #4

DVI Inputs #1 - #2

SD/HD-SDI Inputs #1 - #2

Preview outputs

Main outputs

CONNECTING THE PLS300

18

1

OPERATING THE PLS300

23

4-1. THE PLS300 FRONT PANEL

23

Overview

Standby button

Input selection section

Freeze button

Preset selection section

Background Frame button

Menu section

Logo button

Effect selection button

Take button

PIP button

Background Live button

4-2. THE PLS300 MENU

26

Menu navigation

Home menu

4-3. WORKING WITH THE PLS300

27

Resetting default values

Source output selection

Source input selection

Input selection settings

Output selection settings

PIP conguration

PIP as layers

Working with PIPs

Working with frames

Working with logos

Working with presets

Working with audio

Using presets

Audio conguration

Preset conguration

Mixer functions

Layer transitions and effects

PLS300 color codes

Memorizing frames

Memorizing logos

42

REMOTE CONTROL SOFTWARE

42

5-1. THE PLS300 RCS

RCS presentation

How to use the RCS

Serial connection

Ethernet connection

Software installation

Software overview

HOME MENU

34

2

5-2. WORKING WITH THE RCS

Working with PIPs

Source input conguration

Source output conguration

PIP conguration

Working with logos

Working with frames

Working with presets

Preset conguration

Using presets

Memorizing logos

Working with audio

Memorizing frames

Layer transitions and effects

Audio conguration

OPTIONAL REMOTE CONTROL SYSTEMS

50

APPLICATION EXAMPLES AND TIPS

7-1. ABOUT APPLICATION EXAMPLES

7-2. APPLICATION EXAMPLE

7-3. EXTERNAL PROGRAMMING

51

52

HOW TO CONTACT US

INFORMATION ON DISPOSAL

54

CONTACT INFORMATION

54

WARRANTY AND SERVICES INFORMATION

53

8-1. ANALOG WAY LIMITED WARRANTY

8-2. SERVICES AND RMA

53

3

6-1. Axion2 - Ref. ARC200

6-2. Orchestra - Ref. ORC50

6-3. TRK-800 - Ref. TRK-800

6-4. RK-300 - Ref. RK-300

50

45

1-1. THE PLS300 OPERATING MODE

Before you start setting up your PLS300 for the rst time, be sure you know what you actually want to do with

it. The PLS300 offers a one operating mode, which results in a versatile video production tool for live event

staging and xed installation applications.

* NOTE * : We recommend resetting the device to its default values every time you set up your shows or

events.

INTRODUCTION

BACKGROUND: a “Background” is a source, typically originating from a computer. PLS300 enables you to

work with live or still (frame) background sources - visually in back of all other sources.

LAYER: a “Layer” is an image display element (such as a PIP, Key, Logos or Background) that has an

associated visual priority — either in front (or in back) of another layer.

The PLS300 can simultaneously view no less than 4 layers (2 video, or live layers, 1 frame layer, or

background, and 2 logo layers).

PLS300 can insert up to 1 PIPs on a live background, plus 2 logos.

PIP: a “PIP” (Picture In Picture), is a picture, typically of reduced size, which is positioned over another

background image or PIP. PIPs can be reduced, enlarged, bordered and shadowed. PIPs can overlap,

depending on their visual priority.

PLS300 allows for Dynamic PIP on the opening and closing of the sequence, vertically or horizontally. A

“ying” PIP is also possible over the screen with vertical, horizontal or diagonal animation.

A PIP is considered as a live layer.

FRAME: a “Frame” is a full screen image which is selected from one of he seven still frames which you can

capture with the PLS300. A Frame can be ash captured and imported from any video or computer source

plugged into the machine.

LOGO: a “Logo” is a part of screen image that can be ash captured and imported from any Video or

Computer source, by keying or image cut-out. PLS300 can record up to seven still logos. They can be

positioned anywhere on the screen.

KEYING: a “Key” is an electronic process whereby an image is electronically superimposed over another

source or background, by cutting out either a color (chroma key), or its brightness or luminance levels (luma

key). Keys are typically used for titles, logos and special effects.

PLS300 allows to use a live source with green or blue background and to key it over any other live input.

1-2. USEFUL TERMS AND DEFINITIONS

4

All of the safety and operating instructions should be read before the product is operated and should be

maintained for further reference. Please follow all of the warnings on this product and its operating instructions.

WARNING: To prevent the risk of electric shock and re, do not expose this device to rain, humidity, intense

heat sources (such as heaters and direct sunlight). Slots and openings in the device are provided for ventilation

and to avoid overheating. Make sure the device is never placed near a textile surface that could block the

openings. Also keep away from excessive dust, vibrations and shocks.

POWER: Only use the power supply indicated on the device of the power source. Devices equipped with

a grounding plug should only be used with a grounding type outlet. In no way should this grounding be

modied, avoided or suppressed.

POWER CORD: The device is equipped with a main switch (On (I) /Off (O)). The Switch ON and OFF is

initiated by the main switch.

Caution: The power cord constitute the only mean to totaly disconnect the equipment from the main power.

Apply the following guidelines:

- The equipment connected to the network must have a release system easily accessible and located outside

the unit.

- Unplug the power cord, do not pull on the power cord but always on the plug itself.

- The outlet should always be near the device and easily accessible.

- Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed

upon or against them.

If the power supply cord is damaged, unplug the device. Using the device with a damaged power supply cord

may expose your device to electric shocks or other hazards. Verify the condition of the power supply cords

once in a while. Contact your dealer or service center for replacement if damaged.

CONNECTIONS: All inputs and outputs (except for the power input) are TBTS dened under EN60950.

SERVICING: Do not attempt to service this product yourself by opening or removing covers and screws

since it may expose your device to electric shocks or other hazards. Refer all problems to qualied service

personnel.

OPENINGS: Never push objects of any kind into this product through the openings. If liquids have been spilled

or objects have fallen into the device, unplug it immediately and have it checked by a qualied technician.

HARDWARE INSTALLATION

SAFETY INSTRUCTIONS

2-1. SAFETY INSTRUCTIONS

5

An de mieux comprendre le fonctionnement de cet appareil nous vous conseillons de bien lire toutes les

consignes de sécurité et de fonctionnement de l’appareil avant utilisation. Conserver les instructions de

sécurité et de fonctionnement an de pouvoir les consulter ultérieurement. Respecter toutes les consignes

marquées dans la documentation, sur le produit et sur ce document.

ATTENTION : An de prévenir tout risque de choc électrique et d’incendie, ne pas exposer cet appareil à la

pluie, à l’humidité et aux sources de chaleur intense.

INSTALLATION : Veillez à assurer une circulation d’air sufsante pour éviter toute surchauffe à l’intérieur de

l’appareil. Ne placez pas l’appareil sur ou à proximité d’une surface textile susceptible d’obstruer les orices

de ventilation. N’installez pas l’appareil à proximité de sources de chaleur comme un radiateur ou une poche

d’air chaud, ni dans un endroit exposé au rayonnement solaire direct, à des poussières excessives, à des

vibrations ou à des chocs mécaniques. Ceci pourrait provoquer un mauvais fonctionnement et un accident.

ALIMENTATION : Ne faire fonctionner l’appareil qu’avec la source d’alimentation indiquée sur l’appareil. Les

appareils doivent être obligatoirement connectés sur une source équipée d’une mise à la terre efcace. En

aucun cas cette liaison de terre ne devra être modiée, contournée ou supprimée.

CORDON D’ALIMENTATION : Les appareils sont équipés d’un interrupteur général (Marche I / Arrêt O), la mise

en tension et la mise hors tension se fait en actionnant cet interrupteur général. Attention : Le cordon d’alimentation

constitue le seul moyen de débrancher l’appareil totalement de l’alimentation secteur. Pour être certain que

l’appareil n’est plus alimenté, ce cordon doit être débranché de la prise murale.

Appliquer les consignes suivantes :

- Le matériel relié a demeure au réseau, doit avoir un dispositif de sectionnement facilement accessible qui

doit être incoporé à l’extérieur de l’appareil.

- Débrancher le cordon d’alimentation de la prise murale si vous prévoyez de ne pas utiliser l’appareil pendant

quelques jours ou plus.

- Pour débrancher le cordon, tirez le par la che. Ne tirez jamais sur le cordon proprement dit.

- La prise d’alimentation doit se trouver à proximité de l’appareil et être aisément accessible.

- Ne laissez pas tomber le cordon d’alimentation et ne posez pas d’objets lourds dessus.

Si le cordon d’alimentation est endommagé, débranchez le immédiatement de la prise murale. Il est

dangereux de faire fonctionner un appareil avec un cordon endommagé, un câble abîmé peut provoquer un

risque d’incendie ou un choc électrique. Vérier le câble d’alimentation de temps en temps. Contacter votre

revendeur ou le service après vente pour un remplacement.

CONNEXIONS : Toutes les entrées et sorties (exceptée l’entrée secteur) sont de type TBTS (Très Basse

Tension de Sécurité) dénies selon EN 60950.

RÉPARATION ET MAINTENANCE : L’utilisateur ne doit en aucun cas essayer de procéder aux opérations

de dépannage, car l’ouverture des appareils par retrait des capots ou de toutes autres pièces constituant

les boîtiers ainsi que le dévissage des vis apparentes à l’extérieur, risque d’exposer l’utilisateur à des chocs

électriques ou autres dangers. Contacter le service après-vente, votre revendeur ou s’adresser à un personnel

qualié uniquement.

OUVERTURES ET ORIFICES : Les appareils peuvent comporter des ouvertures (aération, fentes, etc...),

veuillez ne jamais y introduire d’objets et ne jamais obstruer ses ouvertures. Si un liquide ou un objet pénètre

à l’intérieur de l’appareil, débranchez immédiatement l’appareil et faites le contrôler par un personnel qualié

avant de le remettre en service.

INSTRUCTIONS DE SECURITE

6

Allo scopo di capire meglio il funzionamento di questa apparecchiatura vi consigliamo di leggere bene

tutti i consigli di sicurezza e di funzionamento prima dell’utilizzo. Conservare le istruzioni di sicurezza e di

funzionamento al ne di poterle consultare ulteriormente. Seguire tutti i consigli indicati su questo manuale

e sull’apparecchiatura.

ATTENZIONE : Al ne di prevenire qualsiasi rischio di shock elettrico e d’incendio, non esporre l’apparecchiatura

a pioggia, umidità e a sorgenti di eccessivo calore.

INSTALLAZIONE: Assicuratevi che vi sia una sufciente circolazione d’aria per evitare qualsiasi

surriscaldamento all’interno dell’apparecchiatura. Non collocare l’apparecchiatura in prossimità o su superci

tessili suscettibili di ostruire il funzionamento della ventilazione. Non installate l’apparecchiatura in prossimità

di sorgenti di calore come un radiatore o una fuoruscita d’aria calda, né in un posto esposto direttamente ai

raggi del sole, a polvere eccessiva, a vibrazioni o a shock meccanici. Ció potrebbe provocare un erroneo

funzionamento e un incidente.

ALIMENTAZIONE: Far funzionare l’apparecchiatura solo con la sorgente d’alimentazione indicata

sull’apparecchiatura. Le apparecchiature queste devono essere obbligatoriamente collegate su una sorgente

fornita di una efciente messa a terra. In nessun caso questo collegamento potrà essere modicato, sostituito

o eliminato.

CAVO DI ALIMENTAZIONE: Gli apparecchi con un interrutore (commutatore) generale (Accesso I: Speuto

0), accendere ou spagnere l’apparecchio si fa usando l’interrutore.

Attenzione: il cavo di alimentazione è il solo modo di disconnettere l’apparecchio dell’alimentazione. Per

assicurarsi che totalemente l’apparecchio non è più collegato, il cavo deve essere disconesso della presa

murale.

Seguire le instruzioni seguenti:

- Il materiale collegato a residenza alla rete, deve avere un dispositivo di sezionamento facile da raggiongere

eche deve essere inserito all’esterno del apparecchio.

- Disconnettere l’apparecchiatura dalla presa murale se si prevede di non utilizzarla per qualche giorno.

- Per disconnettere il cavo tirare facendo forza sul connettore.

- La presa d’alimentazione deve trovarsi in prossimità dell’apparecchiatura ed essere facilmente accessibile.

- Non far cadere il cavo di alimentazione né appoggiarci sopra degli oggetti pesanti.

Se il cavo di alimentazione é danneggiato, spegnere immediatamente l’apparecchiatura. E’ pericoloso

far funzionare questa apparecchiatura con un cavo di alimentazione danneggiato, un cavo grafato puó

provocare un rischio di incendio o uno shock elettrico. Vericare il cavo di alimentazione spesso. Contattare

il vostro rivenditore o il servizio assistenza per una sostituzione.

CONNESSIONE: Tutti gli ingressi e le uscite (eccetto l’alimentazione) sono di tipo TBTS denite secondo EN 60950.

RIPARAZIONI E ASSISTENZA: L’utilizzatore non deve in nessun caso cercare di riparare l’apparecchiatura,

poiché con l’apertura del coperchio metallico o di qualsiasi altro pezzo costituente la scatola metallica,

nonché svitare le viti che appaiono esteriormente, poiché ció puó provocare all’utilizzatore un rischio di

shock elettrico o altri rischi.

APERTURE DI VENTILAZIONE: Le apparecchiature possono comportare delle aperture di ventilazione, si

prega di non introdurre mai oggetti o ostruire le sue fessure. Se un liquido o un oggetto penetra all’interno

dell’apparecchiatura, disconnetterla e farla controllare da personale qualicato prima di rimetterla in servizio.

INSTRUZIONI DI SECUREZZA

7

Um den Betrieb dieses Geräts zu verstehen, raten wir Ihnen vor der Inbetriebnahme alle Sicherheits

und Betriebsanweisungen genau zu lesen. Diese Sicherheits- und Betriebsanweisungen für einen

späteren Gebrauch sicher aufbewahren. Alle in den Unterlagen, an dem Gerät und hier angegebenen

Sicherheitsanweisungen einhalten.

ACHTUNG: um jegliches Risiko eines Stromschlags oder Feuers zu vermeiden, das Gerät nicht Regen,

Feuchtigkeit oder intensiven Wärmequellen aussetzen.

EINBAU: Eine ausreichende Luftzufuhr sicherstellen, um jegliche Überhitzung im Gerät zu vermeiden. Das

Gerät nicht auf und in Nähe von Textiloberächen, die Belüftungsöffnungen verschließen können, aufstellen.

Das Gerät nicht in Nähe von Wärmequellen, wie z.B. Heizkörper oder Warmluftkappe, aufstellen und es nicht

dem direkten Sonnenlicht, übermäßigem Staub, Vibrationen oder mechanischen Stößen aussetzen. Dies

kann zu Betriebsstörungen und Unfällen führen.

STROMVERSORGUNG: Das Gerät nur mit der auf dem Gerät bezeichnete Stromquelle betreiben. Gerät mit

geerdeter Hauptstromversorgung muss an eine Stromquelle mit efzienter Erdung angeschlossen werden.

Diese Erdung darf auf keinen Fall geändert, umgangen oder entfernt werden.

NETZKABEL: Da die Geräte über einen Hauptschalter (An I/ Aus 0) verfügen, erfolgt die Stromversorgung

und -unterbrechung über diesen Hauptschalter.

Achtung : Das Netzkabel stellt die einzige Möglichkeit dar, das Gerät vollständig vom Netzanschluss zu trennen.

Um sicherzustellen, dass das Gerät nicht mehr versorgt wird, muss dieses Kabel aus der Netzsteckdose

ausgesteckt werden.

Bitte beachten Sie die folgenden Hinweise:

- Wenn Geräte dauerhaft am Netz bleiben, müssen sie über eine leicht zugängliche Trennvorrichtung

verfügen, die außen am Gerät angebracht sein muss.

- Das Kabel mittels dem Stecker herausziehen. Niemals am Stromkabel selbst ziehen.

- Die Steckdose muß sich in der Nähe des Geräts benden und leicht zugänglich sein.

- Das Stromkabel nicht fallen lassen und keine schweren Gegenstände auf es stellen.

Wenn das Stromkabel beschädigt ist, das Gerät sofort abschalten. Es ist gefährlich das Gerät mit einem

beschädigten Stromkabel zu betreiben; ein abgenutztes Kabel kann zu einem Feuer oder Stromschlag

führen. Das Stromkabel regelmäßig untersuchen. Für den Ersatz, wenden Sie sich an Ihren Verkäufer oder

Kundendienststelle.

ANSCHLÜSSE: Bei allen Ein- und Ausgängen (außer der Stromversorgung) handelt es sich, gemäß EN

60950, um Sicherheits Kleinspannunganschlüsse.

REPARATUR UND WARTUNG: Der Benutzer darf keinesfalls versuchen das Gerät selbst zu reparieren, die

Öffnung des Geräts durch Abnahme der Abdeckhaube oder jeglichen anderen Teils des Gehäuses sowie die

Entfernung von außen sichtbaren Schrauben zu Stromschlägen oder anderen Gefahren für den Benutzer

führen kann. Wenden Sie sich an Ihren Verkäufer, Ihre Kundendienststelle oder an qualizierte Fachkräfte.

ÖFFNUNGEN UND MUNDUNGEN: Die Geräte können über Öffnungen verfügen (Belüftung, Schlitze, usw.).

Niemals Gegenstände in die Öffnungen einführen oder die Öffnungen verschließen. Wenn eine Flüssigkeit

oder ein Gegenstand in das Gerät gelangt, den Stecker herausziehen und es vor einer neuen Inbetriebnahme

von qualiziertem Fachpersonal überprüfen lassen.

SICHERHEITSHINWEISE

8

Para comprender mejor el funcionamiento de este aparato, le recomendamos que le acuidadosamente todas

las consignas de seguridad y de funcionamiento del aparato antes de usarlo. Conserve las instrucciones de

seguridad y de funcionamiento para que pueda consultarlas posteriormente. Respete todas las consignas

indicadas en la documentación, relacionadas con el producto y este documento.

CUIDADO: Para prevenir cualquier riesgo de choque eléctrico y de incendio, no exponga este aparato a la

lluvia, a la humedad ni a fuentes de calorintensas.

INSTALACIÓN: Cerciórese de que haya una circulación de aire suciente para evitar cualquier

sobrecalentamiento al interior del aparato. No coloque el aparato cerca ni sobre una supercie textil que

pudiera obstruir los oricios de ventilación. No instale el aparato cerca de fuentes de calor como radiador

o boca de aire caliente, ni en un lugar expuesto a los rayos solares directos o al polvo excesivo, a las

vibraciones o a los choques mecánicos. Esto podría provocar su mal funcionamiento o un accidente.

ALIMENTACIÓN: Ponga a funcionar el aparato únicamente con la fuente de alimentación que se indica en

el aparato. Los aparatos deben estar conectados obligatoriamente a una fuente equipada con una puesta a

tierra ecaz. Por ningún motivo este enlace de tierra deberá ser modicado, cambiado o suprimido.

CABLE DE ALIMENTACIÓN: Los equipos incluyan interruptor general de alimentación (Encender I / Apagar 0),

la puesta en marcha o desconexión se realiza por medio de este interruptor.

El cable de alimentación constituye el único medio de desconectar el aparato totalmente de la red eléctrica.

Para estar seguro de que el aparato no está más alimentado, este cable debe de ser desconectado de la

toma de corriente.

Aplicar las siguientes consignas:

- El material conectado a residencia a la red informática, debe de tener un dispositivo de seccionamiento

fácilmente accesible que debe de ser incorporado al exterior del aparato.

- Desconectar el aparato del enchufe mural si no piensa utilizarlo durante varios días.

- Para desconectar el cable, tire de la clavija. No tire nunca del cable propiamente dicho.

- El enchufe de alimentación debe estar cerca del aparato y ser de fácil acceso.

- No deje caer el cable de alimentación ni coloque objetos pesados encima de él.

Si el cable de alimentación sufriera algún daño, ponga el aparato inmediatamente fuera de tensión. Es

peligroso hacer funcionar este aparato con un cable averiado, ya que un cable dañado puede provocar un

incendio o un choque eléctrico. Verique el estado del cable de alimentación de vez en cuando. Póngase en

contacto con su distribuidor o con el servicio de posventa si necesita cambiarlo.

CONEXIONES: Todas las entradas y salidas (excepto la entrada del sector) son de tipo TBTS (Muy Baja

Tensión de Seguridad) denidas según EN 60950

REPARACIÓN Y MANTENIMIENTO: Por ningún motivo, el usuario deberá tratar de efectuar operaciones

de reparación, ya que si abre los aparatos retirando el capó o cualquier otra pieza que forma parte de

las cajas o si destornilla los tornillos aparentes exteriores, existe el riesgo de producirse una explosión,

choques eléctricos o cualquier otro incidente. Contacte el servicio de posventa, a su distribuidor o dirigirse

con personal cualicado únicamente.

ABERTURAS Y ORIFICIOS: Los aparatos pueden contener aberturas (aireación, ranuras, etc.). No introduzca

allí ningún objeto ni obstruya nunca estas aberturas. Si un líquido o un objeto penetra al interior del aparato,

desconéctelo y hágalo revisar por personal cualicado antes de ponerlo nuevamente en servicio.

INSTRUCCIONES DE SEGURIDAD

9

Tabletop mounting: the PLS300 can be used directly on a table, the unit is equipped with 4 handy anti-slip

rubber feet.

Rack mounting: the PLS300 is compatible with a 19” enclosure. Please follow the instructions below to install

the device in a 19” rack.

Place the device in your rack. Attach the device to the rack by using 4 screws through the front panel holes

(screws not included).

Rear xing is also recommended, in particular for permanent installations. The PLS300 is equipped with drill

holes designed for compatibility with most rackmount braces.

Connect all of the cables of the device and attach them to the rack with the help of tie wraps.

IMPORTANT:

- The openings in the side and rear panels of the device are for cooling. Do not cover these openings to

avoid cutting air circulation.

- Be sure that no weight in excess of 2 kg (4.4 Lbs.) is added onto the PLS300.

- The maximum ambient operating temperature should not exceed 40 °C (104°F)

- The rack and all mounted equipement in it must be reliably grounded according to national and/or local

electrical standards.

1 x Pulse (PLS300) seamless scaler/switcher

1 x Power supply cord

2 x DVI male to HD15 female and DVI female cable

1 x HD15 to 5 BNC cable

1 x Ethernet cross cable (for device update)

1 x Set of 3 audio 5 pin screw terminals

4 x M4x12mm Screws

1 x Quick Start Guide (Sticker)

1 x RCS (Remote Control Software) (PC only) *

1 x User manual (PDF version) *

1 x Quick Start Guide (PDF version) *

* Download on our website: www.analogway.com/

2-2. UNPACKING AND INSPECTION

2-3. RACKMOUNT INFORMATION

!

Dismantling front handles of the device could invalidate warranty on after sales services of your

PLS300. It is strongly advised to avoid using front handles as rests for your PLS300, they are

designed for manipulation purposes only.

If required, front handles of the device can be dismantled, but with caution.The original screws removed

must not be reintroduced to their location without handles in place. Substancial damages can occur,

including risk of electric shock from the main voltage. Only M4x12mm screws can be used. They are

supplied with the unit.

WARNING !

If required, front handles of the device can be dismantled,

but with caution.

The original screws removed must not be reintroduced

to their location without handles in place.Substantial

damages can occur, including risk of electric shock

from the mains voltage.

Only M4x12mm screws can be used.

(They are supplied with the unit)

10

• ANALOG COMPUTER:

Connectors: Inputs #1 to #4: female HD15.

DVI Inputs #1 to #2: female DVI-I (analog pins).

Line frequency: Up to 130 kHz (165 MHz Max pixel rate).

Resolution: Up to 1600x1200 @ 165Mhz, 1920x1200px

(RB, Max V size: 1200px, Max H size 2048px).

Sync. types: RGBHV, RGB/S, RGsB (Sync On Green).

Levels: R, G, B = 0.7 Vp/p.

H & V Sync = TTL

Composite Sync = TTL and 0.3 V (negative).

SOG (Sync On Green) = 0.3 V.

Impedance: R, G, B = 75 ohms.

H = 75 ohms or Hi-Z.

V = Hi-Z.

• RGB/S - RGsB VIDEO:

Connectors: Inputs #1 to #4: female HD15.

DVI Inputs #1 to #2: female DVI-I (analog pins).

Frequency: 15.625 kHz - 50 Hz (625 lines).

15.734 kHz - 60 Hz (525 lines).

Levels: R, G, B = 0.7 Vp/p.

SYNC. = 0.3 Vp/p or TTL (negative).

Impedance: RGB = 75 ohms.

SYNC. = 75 ohms or Hi-Z.

• COMPONENT:

Connectors: Inputs #1 to #4: female HD15.

DVI Inputs #1 to #2: female DVI-I (analog pins).

Frequency: 15.625 kHz - 50 Hz (625 lines).

15.734 kHz - 60 Hz (525 lines).

Levels: Y = 1 Vp/p (0.7 V Luma + 0.3 V Sync.).

Cr / Pr & Cb / Pb = 0.7 Vp/p.

Impedance: 75 ohms.

A large choice of cables and adaptors are compatible with the

PLS300. To nd which are to be used in your setup, please refer to

the Hardware Specications chapter. Please contact your distributor

for a list of available cables and connectors for your PLS300.

or

2-4. CABLE AND ADAPTOR INFORMATION

2-5. HARDWARE SPECIFICATIONS

Input specications

11

• HDTV - HD-YUV:

Connectors: Inputs #1 to #4: female HD15.

DVI Inputs #1 to #2: female DVI-I (analog pins).

Formats: 720p/576p (60Hz), 1080i (50/60Hz), EDTV.

Levels: Y = 1 Vp/p (0.7 V + sync.).

Cr / Pr & Cb / Pb = 1 Vp/p (0.7 V + sync.).

Sync.: Tri-level: ±0.3V (positive/negative).

Bi-level: 0.3V (negative).

Impedance: 75 ohms.

• S.VIDEO:

Connectors: Inputs #1 to #4: female HD15.

DVI Inputs #1 to #2: female DVI-I (analog pins).

Standard: PAL/SECAM 15.625 kHz - 50Hz - 625 lines.

NTSC (3.58 - 4.43MHz): 15.734kHz/60Hz/525 lines.

Levels: Y = 1 Vp/p (0.7 V Luma + 0.3 V Sync.).

C = 0.3 Vp/p (Chroma Burst).

Impedance: 75 ohms.

• COMPOSITE VIDEO:

Connectors: Inputs #1 to #4: female HD15.

DVI Inputs #1 to #2: female DVI-I (analog pins).

Standard: PAL / SECAM: 15.625 kHz - 50 Hz - 625 lines.

NTSC (3.58 - 4.43MHz): 15.734 kHz/60Hz/525 lines.

Level: 1 Vp/p (0.7 V Luma + 0.3 V Sync.).

Impedance: 75 ohms.

• DVI (Digital Video Interface):

Connector: DVI Inputs #1 to #2: female DVI-I (digital pins).

Line frequency: Up to 130 kHz (165 MHz Max pixel rate).

Format: Digital Visual Interface (DVI)-TMDS single link.

Resolution: Up to 1600x1200 @ 165Mhz, 1920x1200px

(RB, Max V size : 1200px, Max H size 2048px).

• SD-SDI:

Connector: SDI Inputs #1 to #2: female BNC.

Formats: SMPTE 259M

Data rate: 270 Mbps serial digital.

Impedance: 75 ohms.

• 3G/HD-SDI:

Connector: SDI Inputs #1 to #2: female BNC.

Formats: 720p @ 50, 59.94 & 60 Hz

1035i @ 50, 59.94 & 60 Hz

1080i @ 50, 59.94 & 60 Hz

1080p @ 23.97, 24, 25, 29.97, 30, 50, 59.94 & 60 Hz.

1080sF @ 50, 59.94 & 60 Hz.

Data rate: 1.5 Gbps serial digital (Level A).

Impedance: 75 ohms.

or

12

• ANALOG OUTPUTS

Connector: Outputs #1 (Main) & #2 (Preview): female HD15,

DVI-I (analog pins).

Resolutions:

Signals: RGBHV, RGBS and RGsB.

Levels: R, G, B = 0.7 Vp/p.

Sync.: Separate H & V = TTL (negative).

Composite = TTL (negative).

SOG = 0.3 Vp/p (negative).

Impedance: R, G, B = 75 ohms.

or

Output specications

Format Ratio Available Refresh Rates

HDTV 720p 50Hz 59.94Hz 60Hz

HDTV 1035i 59.94Hz 60Hz

HDTV 1080i 50Hz 59.94Hz 60Hz

HDTV 1080p 23.97Hz 24Hz 25Hz 29.97Hz 30Hz 50Hz 59.94Hz 60Hz

HDTV 1080sF 50Hz 59.94Hz 60Hz

640 x 480 4 : 3 50Hz 60Hz 72Hz 75Hz

800 x 600 4 : 3 50Hz 60Hz 72Hz 75Hz

848 x 480 16 : 9 50Hz 60Hz 72Hz 75Hz

1024 x 768 4 : 3 50Hz 60Hz 72Hz 75Hz

1280 x 720 16 : 9 50Hz 60Hz

1280 x 768 15 : 9 50Hz 60Hz 72Hz 75Hz

1280 x 800 16 : 10 50Hz 60Hz 72Hz 75Hz

1280 x 1024 5 : 4 50Hz 60Hz 72Hz 75Hz

1360 x 768 16 : 9 50Hz 60Hz 72Hz 75Hz

1366 x 768 16 : 9 50Hz 60Hz 72Hz 75Hz

1366 x 800 15 : 9 50Hz 60Hz 72Hz 75Hz

1400 x 1050 4 : 3 50Hz 60Hz 72Hz 75Hz

1440 x 900 16 : 10 50Hz 60Hz 72Hz 75Hz

1600 x 1200 4 : 3 50Hz 60Hz

1680 x 1050 16 : 10 50Hz 60Hz

1920 x 1080 16 : 9 50Hz 60Hz

1920 x 1080HD 16 : 9 50Hz 60Hz

1920 x 1080 B 16 : 9 50Hz 60Hz

1920 x 1080 C 16 : 9 50Hz 60Hz

1920 x 1200 16 : 10 50Hz 60Hz

2048 x 1080 19 : 10 50Hz 60Hz

13

• AUDIO OUTPUT:

Connector: Outputs #1 (Main):

Balanced or unbalanced mono/stereo output

(on 5-pin MCO male connector).

Vo max: Unbalanced = +15dBu (at 300Ω load).

Balanced = +21 dBu (at 600Ω load).

Zo = 600 Ω balanced.

Zo = 300 Ω unbalanced.

G = 0 dB nominal.

• DVI (Digital Video Interface) OUTPUTS:

Connector: Outputs #1 (Main) & #2 (Preview): female DVI-I

(digital pins).

Signal: Digital Visual Interface (DVI)-TMDS single link.

Resolutions:

Balanced connection

Unbalanced connection

14

Format Ratio Available Refresh Rates

HDTV 720p 50Hz 59.94Hz 60Hz

HDTV 1035i 59.94Hz 60Hz

HDTV 1080i 50Hz 59.94Hz 60Hz

HDTV 1080p 23.97Hz 24Hz 25Hz 29.97Hz 30Hz 50Hz 59.94Hz 60Hz

HDTV 1080sF 50Hz 59.94Hz 60Hz

640 x 480 4 : 3 50Hz 60Hz 72Hz 75Hz

800 x 600 4 : 3 50Hz 60Hz 72Hz 75Hz

848 x 480 16 : 9 50Hz 60Hz 72Hz 75Hz

1024 x 768 4 : 3 50Hz 60Hz 72Hz 75Hz

1280 x 720 16 : 9 50Hz 60Hz

1280 x 768 15 : 9 50Hz 60Hz 72Hz 75Hz

1280 x 800 16 : 10 50Hz 60Hz 72Hz 75Hz

1280 x 1024 5 : 4 50Hz 60Hz 72Hz 75Hz

1360 x 768 16 : 9 50Hz 60Hz 72Hz 75Hz

1366 x 768 16 : 9 50Hz 60Hz 72Hz 75Hz

1366 x 800 15 : 9 50Hz 60Hz 72Hz 75Hz

1400 x 1050 4 : 3 50Hz 60Hz 72Hz 75Hz

1440 x 900 16 : 10 50Hz 60Hz 72Hz 75Hz

1600 x 1200 4 : 3 50Hz 60Hz

1680 x 1050 16 : 10 50Hz 60Hz

1920 x 1080 16 : 9 50Hz 60Hz

1920 x 1080HD 16 : 9 50Hz 60Hz

1920 x 1080 B 16 : 9 50Hz 60Hz

1920 x 1080 C 16 : 9 50Hz 60Hz

1920 x 1200 16 : 10 50Hz 60Hz

2048 x 1080 19 : 10 50Hz 60Hz

DVI 1 DVI 2

L

R

L

R

UNBALANCED

LEFT

RIGHT

GROUND(S)

Input DVI 1

Input DVI 2

4

L+

L-

R+

R-

BALANCED

L+

R+

L-

R-

GROUND(S)

PHYSICAL

Dimensions: W 482 x D 330 x H 45 mm

19”W x 13”D x 1.8”H.

(Compatible with a Standard 19” rack, Height = 1U).

Weight: 4.3 kg / 9.5 lbs.

ENVIRONMENTAL

Cooling air ow from right side to left side

Maximum ambient operating temperature: < 40°C ( < 104°F)

Operating temperature: 0 to +40°C / +32° to +104°F

Storage temperature: -40 to +70°C / -40° to +158 °F

Operating humidity: 10 to 80% (non condensing)

Input voltage range: 100-240 VAC, 50/60 Hz

Typical consumption: 90 W

CERTIFICATIONS

CE Compliancy test following

- EN 55022: 2006 / A1: 2007,

- EN 55024: 1998 / A1: 2001 / A2: 2003,

- EN 61000-3-2: 2006

- EN 61000-3-3: 1995 / A1: 2001 / A2: 2005,

Safety test following:

- IEC 60950-1: 2005

- UL 60950-1: 2007

- CAN/CSA-C22.2 NO. 60950-1

Power supply: IEC/EN/UL/CSA 60950-1, internal, autoswitchable

Mechanical (in carton): Vibration: IEC60068-2-64

Free fall: IEC60068-2-32, RoHS, WEEE

Environmental specications

15

• COMMUNICATION PORTS:

REMOTE RS232

Connector: DB 9 female

Level: RS232.

Data Rate: 9600 Bauds, 8 data bits, 1 stop bit, no parity bit,

no ow control for normal. DTR & RTS needed for

upgrade.

Communication specications

• LAN:

Connector : RJ45

Protocol: TCP (Transmission Control Protocol) or UDP

(User Datagram Protocol).

Ethernet: Base 10/100

Pin outs

16

• VGA

Standard VGA

1- Red 6- Red Return 11- ID Bit 0

2- Green 7- Green Return 12- ID Bit 1

3- Blue 8- Blue Return 13- H Sync

4- ID Bit 2 9- No Pin 14- V Sync

5- Test (Gnd) 10- Sync Return 15- ID Bit 3

• DIGITAL VISUAL INTERFACE DVI

1- TMDS Data 2- 7- DDC Data 13- Not used 19- TMDS Data 0 Shield

2- TMDS Data 2+ 8- Analog Vertical Sync 14- +5V (Power) 20- Not used

3- TMDS Data 2 Shield 9- TMDS Data 1- 15- Ground for (+5V) 21- Not used

4- Not used 10- TMDS Data 1+ 16- Hot Plug Detect. 22- TMDS Clock Shield

5- Not used 11- TMDS Data 1 Shield 17- TMDS Data 0- 23- TMDS Clock +

6- DDC Clock 12- Not used 18- TMDS Data 0+ 24- TMDS Clock-

C1- Analog Red Video (or Cr/Pr or C)

C2- Analog Green Video (or Y or Composite Video)

C3- Analog Blue Video (or Cb/Pb)

C4- Analog Horizontal Sync (or Composite Sync)

C5- Analog Common Ground Return

DDC = Display Data Channel

TMDS = Transition Minimized differential signal

• RS-232 CONNECTOR

1- NC 6- NC

2- Transmit data to PC (Tx1) 7- NC

3- Receive data from PC (Rx1) 8- NC (or +12V. dc)

4- NC 9- NC

5- Ground

• VESA DDC

1- Red 7- Green Return 13- H Sync

2- Green 8- Blue Return 14- V Sync

3- Blue 9- DDC+5 Volt supply 15- Data Clock (SCL)

4- ID Bit 2 10- Sync Return

5- Test 11- ID Bit

6- Red Return 12- Bi-directional data (SDA)

17

If you want to use HDCP (High Denition Copy Protection) content from your sources, be sure pluging HDCP

compliant screens or projectors. If it’s not the case, the output image could be disabled.

When displaying HDCP protected sources on non HDCP compliant equipment, the following message will be

displayed on the device VFD screen:

“Due to HDCP content, non HDCP screens cannot display protected sources”

Screen will go to black without displaying the HDCP input image, or partially layer out non HDCP content.

Concerning the DVI inputs, a specic feature allows enable/disable the HDCP receiver for the input chosen.

It can be very useful especially using a Mac:

Input Menu > DVI# > HDCP detection

The output status can provide you all information about the output in real time.

This feature is particularly needed when HDCP is used with long cable to be sure that the communication is

well handled.

HDCP compliance

NOTE: as part of our policy of continuous improvement, Analog Way reserves the right to make

design and specication changes for product improvements without prior notice. The performance

specication gures indicated are nominal values of production units. There may be some deviations

from these values in individual units.

!

The PLS300 can be set up with up to 10 different sources, and supports up to 2 digital DVI-D sources, 2 SD-

SDI sources and 6 analog computer/video sources simultaneously. The versatility of the PLS300 will allow

for almost any event conguration and cater for all your projection needs.

The intuitive rear panel of the PLS300 will let you set up for the rst time quickly and easily. Here is an

example of a typical PLS300 setup.

3-1. CONNECTING THE PLS300

CONNECTING THE PLS300

18

La pagina sta caricando ...

Analog way PLS300 Manuale utente

Analog way PLS300 Manuale utente

in altre lingue

Documenti correlati

Altri documenti